docs/pcie.txt: Replace ioh3420 with pcie-root-port
PATCH 1/1 docs/pcie.txt: Replace ioh3420 with pcie-root-port
From: Marcel Apfelbaum <[email protected]>
Do not mention ioh3420 in the "how to" doc.
The device still works and can be used by already
existing setups, but no need to be mentioned.
---
This patch was posted 5 years ago:
https://lore.kernel.org/all/[email protected]/
but seems to have fallen through the cracks and did not get merged.
This just had the obvious/trivial conflict resolution done, along with trimming hugely excessive whitespace before the '\' line continuation.
docs/pcie.txt | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
docs/pcie.txt +8 -8
@@ -48,8 +48,8 @@ Place only the following kinds of devices directly on the Root Complex: strangely when PCI Express devices are integrated with the Root Complex. - (2) PCI Express Root Ports (ioh3420), for starting exclusively PCI Express - hierarchies. + (2) PCI Express Root Ports (pcie-root-port), for starting exclusively + PCI Express hierarchies. (3) PCI Express to PCI Bridge (pcie-pci-bridge), for starting legacy PCI hierarchies.
@@ -70,7 +70,7 @@ Place only the following kinds of devices directly on the Root Complex: -device pxb-pcie,id=pcie.1,bus_nr=x[,numa_node=y][,addr=z] PCI Express Root Ports and PCI Express to PCI bridges can be connected to the pcie.1 bus: - -device ioh3420,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z] \ + -device pcie-root-port,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z] \ -device pcie-pci-bridge,id=pcie_pci_bridge1,bus=pcie.1
@@ -112,14 +112,14 @@ Plug only PCI Express devices into PCI Express Ports. ------------ 2.2.1 Plugging a PCI Express device into a PCI Express Root Port: - -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ + -device pcie-root-port,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ -device <dev>,bus=root_port1 2.2.2 Using multi-function PCI Express Root Ports: - -device ioh3420,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0] \ - -device ioh3420,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \ - -device ioh3420,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \ + -device pcie-root-port,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0] \ + -device pcie-root-port,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \ + -device pcie-root-port,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \ 2.2.3 Plugging a PCI Express device into a Switch: - -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ + -device pcie-root-port,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ -device x3130-upstream,id=upstream_port1,bus=root_port1[,addr=x] \ -device xio3130-downstream,id=downstream_port1,bus=upstream_port1,chassis=x1,slot=y1[,addr=z1]] \ -device <dev>,bus=downstream_port1
Signature · 1 line
2.39.0
Quoted 16 lines · Daniel P. Berrangé
From: Marcel Apfelbaum <[email protected]>
Do not mention ioh3420 in the "how to" doc.
The device still works and can be used by already
existing setups, but no need to be mentioned.Suggested-by Andrew Jones <[email protected]>Reviewed-by Laszlo Ersek <[email protected]>Signed-off-by Marcel Apfelbaum <[email protected]>Signed-off-by Daniel P. Berrangé <[email protected]>---
This patch was posted 5 years ago:
Quoted 7 lines
but seems to have fallen through the cracks and did not get merged.
This just had the obvious/trivial conflict resolution done, along with trimming hugely excessive whitespace before the '\' line continuation.
docs/pcie.txt | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
Thanks for resurrecting this!
Laszlo
Quoted 44 lines
docs/pcie.txt +8
-8@@ -48,8 +48,8 @@ Place only the following kinds of devices directly on the Root Complex: strangely when PCI Express devices are integrated with the Root Complex. - (2) PCI Express Root Ports (ioh3420), for starting exclusively PCI Express - hierarchies. + (2) PCI Express Root Ports (pcie-root-port), for starting exclusively + PCI Express hierarchies. (3) PCI Express to PCI Bridge (pcie-pci-bridge), for starting legacy PCI hierarchies.@@ -70,7 +70,7 @@ Place only the following kinds of devices directly on the Root Complex: -device pxb-pcie,id=pcie.1,bus_nr=x[,numa_node=y][,addr=z] PCI Express Root Ports and PCI Express to PCI bridges can be connected to the pcie.1 bus: - -device ioh3420,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z] \ + -device pcie-root-port,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z] \ -device pcie-pci-bridge,id=pcie_pci_bridge1,bus=pcie.1@@ -112,14 +112,14 @@ Plug only PCI Express devices into PCI Express Ports. ------------ 2.2.1 Plugging a PCI Express device into a PCI Express Root Port: - -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ + -device pcie-root-port,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ -device <dev>,bus=root_port1 2.2.2 Using multi-function PCI Express Root Ports: - -device ioh3420,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0] \ - -device ioh3420,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \ - -device ioh3420,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \ + -device pcie-root-port,id=root_port1,multifunction=on,chassis=x,addr=z.0[,slot=y][,bus=pcie.0] \ + -device pcie-root-port,id=root_port2,chassis=x1,addr=z.1[,slot=y1][,bus=pcie.0] \ + -device pcie-root-port,id=root_port3,chassis=x2,addr=z.2[,slot=y2][,bus=pcie.0] \ 2.2.3 Plugging a PCI Express device into a Switch: - -device ioh3420,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ + -device pcie-root-port,id=root_port1,chassis=x,slot=y[,bus=pcie.0][,addr=z] \ -device x3130-upstream,id=upstream_port1,bus=root_port1[,addr=x] \ -device xio3130-downstream,id=downstream_port1,bus=upstream_port1,chassis=x1,slot=y1[,addr=z1]] \ -device <dev>,bus=downstream_port1