Skip to contentSkip to conversation

ARM: dts: imx: Fix pca9547 i2c-mux node name

PATCH In review Sasha Levin 2 participants 15 messages Jan 24, 2023

Subsystems (9)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/14 ARM: dts: imx: Fix pca9547 i2c-mux node name

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit f78985f9f58380eec37f82c8a2c765aa7670fc29 ]

"make dtbs_check":

arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml

Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification.

---
 arch/arm/boot/dts/imx53-ppd.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx53-ppd.dts +1 -1
index 37d0cffea99c..70c4a4852256 100644
@@ -488,7 +488,7 @@ &i2c1 {
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
Signature · 1 line
2.39.0
author maintainer
#1 lore raw

PATCH 2/14 ARM: dts: vf610: Fix pca9548 i2c-mux node names

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 42825d1f269355d63554ab3c3762611e4d8053e9 ]

"make dtbs_check":

    arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: $nodename:0: 'tca9548@70' does not match '^(i2c-?)?mux'
	    From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4' were unexpected)
	    From schema: /scratch/geert/linux/linux-renesas/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
    ...

Fix this by renaming PCA9548 nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification.

---
 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 2 +-
 arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +1 -1
index 043ddd70372f..36d5299b2baa 100644
@@ -343,7 +343,7 @@ gpio6: io-expander@22 {
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +1 -1
index de79dcfd32e6..ba2001f37315 100644
@@ -340,7 +340,7 @@ eeprom@50 {
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
Signature · 1 line
2.39.0
author maintainer
#2 lore raw

PATCH 3/14 arm64: dts: freescale: Fix pca954x i2c-mux node names

In reply to Sasha Levin

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]

"make dtbs_check":

arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...

Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus multiplexer/switch DT bindings and the Generic Names Recommendation in the Devicetree Specification.

---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts  | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi   | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi   | 2 +-
 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi  | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts    | 4 ++--
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts        | 2 +-
 12 files changed, 13 insertions(+), 13 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +1 -1
index e22c5e77fecd..9615f3b9ee60 100644
@@ -110,7 +110,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +1 -1
index fea167d222cf..14856bc79b22 100644
@@ -70,7 +70,7 @@ fpga: board-control@2,0 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +1 -1
index eec62c63dafe..9ee9928f71b4 100644
@@ -76,7 +76,7 @@ &duart1 {
 &i2c0 {
 	status = "okay";
 
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +1 -1
index 41d8b15f25a5..aa52ff73ff9e 100644
@@ -53,7 +53,7 @@ flash@2 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +1 -1
index 1bfbce69cc8b..ee8e932628d1 100644
@@ -136,7 +136,7 @@ mdio2_aquantia_phy: ethernet-phy@0 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +1 -1
index d3f03dcbb8c3..a9c6682a3955 100644
@@ -245,7 +245,7 @@ rx8035: rtc@32 {
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +1 -1
index 10d2fe091965..8d96d18c3697 100644
@@ -44,7 +44,7 @@ cpld@3,0 {
 
 &i2c0 {
 	status = "okay";
-	pca9547@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +1 -1
index 4b71c4fcb35f..787e408da002 100644
@@ -44,7 +44,7 @@ cpld@3,0 {
 
 &i2c0 {
 	status = "okay";
-	pca9547@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9547";
 		reg = <0x75>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi +1 -1
index afb455210bd0..d32a52ab00a4 100644
@@ -54,7 +54,7 @@ &esdhc1 {
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +1 -1
index 74c09891600f..6357078185ed 100644
@@ -214,7 +214,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		reg = <0x70>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +2 -2
index f70fb32b96b0..cf14ab5f7404 100644
@@ -133,7 +133,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	i2cmux@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@@ -216,7 +216,7 @@ &i2c4 {
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pca9546: i2cmux@70 {
+	pca9546: i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +1 -1
index 863232a47004..4497763d57cc 100644
@@ -61,7 +61,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9646", "nxp,pca9546";
 		#address-cells = <1>;
 		#size-cells = <0>;
Signature · 1 line
2.39.0
author maintainer
#3 lore raw

PATCH 4/14 arm64: dts: imx8mq-thor96: fix no-mmc property for SDHCI

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit ef10d57936ead5e817ef7cea6a87531085e77773 ]

There is no "no-emmc" property, so intention for SD/SDIO only nodes was to use "no-mmc".

---
 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/freescale/imx8mq-thor96.dts +2 -2
index 5d5aa6537225..6e6182709d22 100644
@@ -339,7 +339,7 @@ &usdhc1 {
 	bus-width = <4>;
 	non-removable;
 	no-sd;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -359,7 +359,7 @@ &usdhc2 {
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	disable-wp;
 	status = "okay";
 };
Signature · 1 line
2.39.0
author maintainer
#4 lore raw

PATCH 5/14 firmware: arm_scmi: Clear stale xfer->hdr.status

In reply to Sasha Levin

From: Cristian Marussi <[email protected]>

[ Upstream commit f6ca5059dc0d6608dc46070f48e396d611f240d6 ]

Stale error status reported from a previous message transaction must be cleared before starting a new transaction to avoid being confusingly reported in the following SCMI message dump traces.

---
 drivers/firmware/arm_scmi/driver.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/firmware/arm_scmi/driver.c +2 -0
index a8ff4c9508b7..11842497b226 100644
@@ -783,6 +783,8 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
 			      xfer->hdr.protocol_id, xfer->hdr.seq,
 			      xfer->hdr.poll_completion);
 
+	/* Clear any stale status */
+	xfer->hdr.status = SCMI_SUCCESS;
 	xfer->state = SCMI_XFER_SENT_OK;
 	/*
 	 * Even though spinlocking is not needed here since no race is possible
Signature · 1 line
2.39.0
author maintainer
#5 lore raw

PATCH 6/14 bpf: Skip task with pid=1 in send_signal_common()

In reply to Sasha Levin

From: Hao Sun <[email protected]>

[ Upstream commit a3d81bc1eaef48e34dd0b9b48eefed9e02a06451 ]

The following kernel panic can be triggered when a task with pid=1 attaches a prog that attempts to send killing signal to itself, also see [1] for more details:

  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  CPU: 3 PID: 1 Comm: systemd Not tainted 6.1.0-09652-g59fe41b5255f #148
  Call Trace:
  <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x100/0x178 lib/dump_stack.c:106
  panic+0x2c4/0x60f kernel/panic.c:275
  do_exit.cold+0x63/0xe4 kernel/exit.c:789
  do_group_exit+0xd4/0x2a0 kernel/exit.c:950
  get_signal+0x2460/0x2600 kernel/signal.c:2858
  arch_do_signal_or_restart+0x78/0x5d0 arch/x86/kernel/signal.c:306
  exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
  exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
  __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
  syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
  do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

So skip task with pid=1 in bpf_send_signal_common() to avoid the panic.

[1] https://lore.kernel.org/bpf/[email protected]

---
 kernel/trace/bpf_trace.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/trace/bpf_trace.c +3 -0
index c289010b0964..4daf1e044556 100644
@@ -793,6 +793,9 @@ static int bpf_send_signal_common(u32 sig, enum pid_type type)
 		return -EPERM;
 	if (unlikely(!nmi_uaccess_okay()))
 		return -EPERM;
+	/* Task should not be pid=1 to avoid kernel panic. */
+	if (unlikely(is_global_init(current)))
+		return -EPERM;
 
 	if (irqs_disabled()) {
 		/* Do an early check on signal validity. Otherwise,
Signature · 1 line
2.39.0
author maintainer
#6 lore raw

PATCH 7/14 erofs/zmap.c: Fix incorrect offset calculation

In reply to Sasha Levin

From: Siddh Raman Pant <[email protected]>

[ Upstream commit 6acd87d50998ef0afafc441613aeaf5a8f5c9eff ]

Effective offset to add to length was being incorrectly calculated, which resulted in iomap->length being set to 0, triggering a WARN_ON in iomap_iter_done().

Fix that, and describe it in comments.

This was reported as a crash by syzbot under an issue about a warning encountered in iomap_iter_done(), but unrelated to erofs.

C reproducer: https://syzkaller.appspot.com/text?tag=ReproC&x=1037a6b2880000
Kernel config: https://syzkaller.appspot.com/text?tag=KernelConfig&x=e2021a61197ebe02
Dashboard link: https://syzkaller.appspot.com/bug?extid=a8e049cd3abd342936b6

---
 fs/erofs/zmap.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
fs/erofs/zmap.c +7 -3
index 7a6df35fdc91..73b86b5c1a75 100644
@@ -700,12 +700,16 @@ static int z_erofs_iomap_begin_report(struct inode *inode, loff_t offset,
 		iomap->type = IOMAP_HOLE;
 		iomap->addr = IOMAP_NULL_ADDR;
 		/*
-		 * No strict rule how to describe extents for post EOF, yet
-		 * we need do like below. Otherwise, iomap itself will get
+		 * No strict rule on how to describe extents for post EOF, yet
+		 * we need to do like below. Otherwise, iomap itself will get
 		 * into an endless loop on post EOF.
+		 *
+		 * Calculate the effective offset by subtracting extent start
+		 * (map.m_la) from the requested offset, and add it to length.
+		 * (NB: offset >= map.m_la always)
 		 */
 		if (iomap->offset >= inode->i_size)
-			iomap->length = length + map.m_la - offset;
+			iomap->length = length + offset - map.m_la;
 	}
 	iomap->flags = 0;
 	return 0;
Signature · 1 line
2.39.0
author maintainer
#7 lore raw

PATCH 8/14 init/Kconfig: fix LOCALVERSION_AUTO help text

In reply to Sasha Levin

From: Rasmus Villemoes <[email protected]>

[ Upstream commit 0f9c608d4a1eb852d6769d2fc5906c71c02565ae ]

It was never guaranteed to be exactly eight, but since commit 548b8b5168c9 ("scripts/setlocalversion: make git describe output more reliable"), it has been exactly 12.

---
 init/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
init/Kconfig +1 -1
index a4144393717b..8b09b83e6e7d 100644
@@ -190,7 +190,7 @@ config LOCALVERSION_AUTO
 	  appended after any matching localversion* files, and after the value
 	  set in CONFIG_LOCALVERSION.
 
-	  (The actual string used here is the first eight characters produced
+	  (The actual string used here is the first 12 characters produced
 	  by running the command:
 
 	    $ git rev-parse --verify HEAD
Signature · 1 line
2.39.0
author maintainer
#8 lore raw

PATCH 9/14 btrfs: factor out scratching of one regular super block

In reply to Sasha Levin

From: Christoph Hellwig <[email protected]>

[ Upstream commit 0e0078f72be81bbb2a02b229fd2cec8ad63e4fb1 ]

btrfs_scratch_superblocks open codes scratching super block of a non-zoned super block. Split the code to read, zero and write the superblock for regular devices into a separate helper.

---
 fs/btrfs/volumes.c | 51 +++++++++++++++++++++++-----------------------
 1 file changed, 26 insertions(+), 25 deletions(-)
fs/btrfs/volumes.c +26 -25
index f01549b8c7c5..1f236604dffd 100644
@@ -2060,42 +2060,43 @@ static u64 btrfs_num_devices(struct btrfs_fs_info *fs_info)
 	return num_devices;
 }
 
+static void btrfs_scratch_superblock(struct btrfs_fs_info *fs_info,
+				     struct block_device *bdev, int copy_num)
+{
+	struct btrfs_super_block *disk_super;
+	struct page *page;
+	int ret;
+
+	disk_super = btrfs_read_dev_one_super(bdev, copy_num, false);
+	if (IS_ERR(disk_super))
+		return;
+
+	memset(&disk_super->magic, 0, sizeof(disk_super->magic));
+	page = virt_to_page(disk_super);
+	set_page_dirty(page);
+	lock_page(page);
+	/* write_on_page() unlocks the page */
+	ret = write_one_page(page);
+	if (ret)
+		btrfs_warn(fs_info, "error clearing superblock number %d (%d)",
+			copy_num, ret);
+	btrfs_release_disk_super(disk_super);
+}
+
 void btrfs_scratch_superblocks(struct btrfs_fs_info *fs_info,
 			       struct block_device *bdev,
 			       const char *device_path)
 {
-	struct btrfs_super_block *disk_super;
 	int copy_num;
 
 	if (!bdev)
 		return;
 
 	for (copy_num = 0; copy_num < BTRFS_SUPER_MIRROR_MAX; copy_num++) {
-		struct page *page;
-		int ret;
-
-		disk_super = btrfs_read_dev_one_super(bdev, copy_num, false);
-		if (IS_ERR(disk_super))
-			continue;
-
-		if (bdev_is_zoned(bdev)) {
+		if (bdev_is_zoned(bdev))
 			btrfs_reset_sb_log_zones(bdev, copy_num);
-			continue;
-		}
-
-		memset(&disk_super->magic, 0, sizeof(disk_super->magic));
-
-		page = virt_to_page(disk_super);
-		set_page_dirty(page);
-		lock_page(page);
-		/* write_on_page() unlocks the page */
-		ret = write_one_page(page);
-		if (ret)
-			btrfs_warn(fs_info,
-				"error clearing superblock number %d (%d)",
-				copy_num, ret);
-		btrfs_release_disk_super(disk_super);
-
+		else
+			btrfs_scratch_superblock(fs_info, bdev, copy_num);
 	}
 
 	/* Notify udev that device has changed */
Signature · 1 line
2.39.0
#9 lore raw

Re: [PATCH AUTOSEL 5.15 09/14] btrfs: factor out scratching of one regular super block

Quoted 7 lines · Sasha Levin

From: Christoph Hellwig <[email protected]>

[ Upstream commit 0e0078f72be81bbb2a02b229fd2cec8ad63e4fb1 ]

btrfs_scratch_superblocks open codes scratching super block of a non-zoned super block. Split the code to read, zero and write the superblock for regular devices into a separate helper.

Why is this a stable candidate?

author maintainer
#10 lore raw

PATCH 10/14 blk-cgroup: fix missing pd_online_fn() while activating policy

In reply to Sasha Levin

From: Yu Kuai <[email protected]>

[ Upstream commit e3ff8887e7db757360f97634e0d6f4b8e27a8c46 ]

If the policy defines pd_online_fn(), it should be called after pd_init_fn(), like blkg_create().

---
 block/blk-cgroup.c | 4 ++++
 1 file changed, 4 insertions(+)
block/blk-cgroup.c +4 -0
index ce5858dadca5..3ee4c1217b63 100644
@@ -1360,6 +1360,10 @@ int blkcg_activate_policy(struct request_queue *q,
 		list_for_each_entry_reverse(blkg, &q->blkg_list, q_node)
 			pol->pd_init_fn(blkg->pd[pol->plid]);
 
+	if (pol->pd_online_fn)
+		list_for_each_entry_reverse(blkg, &q->blkg_list, q_node)
+			pol->pd_online_fn(blkg->pd[pol->plid]);
+
 	__set_bit(pol->plid, q->blkcg_pols);
 	ret = 0;
 
Signature · 1 line
2.39.0
author maintainer
#11 lore raw

PATCH 11/14 HID: playstation: sanity check DualSense calibration data.

In reply to Sasha Levin

From: Roderick Colenbrander <[email protected]>

[ Upstream commit ccf1e1626d37745d0a697db67407beec9ae9d4b8 ]

Make sure calibration values are defined to prevent potential kernel crashes. This fixes a hypothetical issue for virtual or clone devices inspired by a similar fix for DS4.

---
 drivers/hid/hid-playstation.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
drivers/hid/hid-playstation.c +32 -0
index bd0e0fe2f627..944e5e5ff134 100644
@@ -626,6 +626,7 @@ static const struct attribute_group ps_device_attribute_group = {
 
 static int dualsense_get_calibration_data(struct dualsense *ds)
 {
+	struct hid_device *hdev = ds->base.hdev;
 	short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus;
 	short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus;
 	short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus;
@@ -636,6 +637,7 @@ static int dualsense_get_calibration_data(struct dualsense *ds)
 	int speed_2x;
 	int range_2g;
 	int ret = 0;
+	int i;
 	uint8_t *buf;
 
 	buf = kzalloc(DS_FEATURE_REPORT_CALIBRATION_SIZE, GFP_KERNEL);
@@ -687,6 +689,21 @@ static int dualsense_get_calibration_data(struct dualsense *ds)
 	ds->gyro_calib_data[2].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S;
 	ds->gyro_calib_data[2].sens_denom = gyro_roll_plus - gyro_roll_minus;
 
+	/*
+	 * Sanity check gyro calibration data. This is needed to prevent crashes
+	 * during report handling of virtual, clone or broken devices not implementing
+	 * calibration data properly.
+	 */
+	for (i = 0; i < ARRAY_SIZE(ds->gyro_calib_data); i++) {
+		if (ds->gyro_calib_data[i].sens_denom == 0) {
+			hid_warn(hdev, "Invalid gyro calibration data for axis (%d), disabling calibration.",
+					ds->gyro_calib_data[i].abs_code);
+			ds->gyro_calib_data[i].bias = 0;
+			ds->gyro_calib_data[i].sens_numer = DS_GYRO_RANGE;
+			ds->gyro_calib_data[i].sens_denom = S16_MAX;
+		}
+	}
+
 	/*
 	 * Set accelerometer calibration and normalization parameters.
 	 * Data values will be normalized to 1/DS_ACC_RES_PER_G g.
@@ -709,6 +726,21 @@ static int dualsense_get_calibration_data(struct dualsense *ds)
 	ds->accel_calib_data[2].sens_numer = 2*DS_ACC_RES_PER_G;
 	ds->accel_calib_data[2].sens_denom = range_2g;
 
+	/*
+	 * Sanity check accelerometer calibration data. This is needed to prevent crashes
+	 * during report handling of virtual, clone or broken devices not implementing calibration
+	 * data properly.
+	 */
+	for (i = 0; i < ARRAY_SIZE(ds->accel_calib_data); i++) {
+		if (ds->accel_calib_data[i].sens_denom == 0) {
+			hid_warn(hdev, "Invalid accelerometer calibration data for axis (%d), disabling calibration.",
+					ds->accel_calib_data[i].abs_code);
+			ds->accel_calib_data[i].bias = 0;
+			ds->accel_calib_data[i].sens_numer = DS_ACC_RANGE;
+			ds->accel_calib_data[i].sens_denom = S16_MAX;
+		}
+	}
+
 err_free:
 	kfree(buf);
 	return ret;
Signature · 1 line
2.39.0
author maintainer
#12 lore raw

PATCH 12/14 dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init

In reply to Sasha Levin

From: Hui Wang <[email protected]>

[ Upstream commit 1417f59ac0b02130ee56c0c50794b9b257be3d17 ]

If the function sdma_load_context() fails, the sdma_desc will be freed, but the allocated desc->bd is forgot to be freed.

We already met the sdma_load_context() failure case and the log as below:

[ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready

...

In this case, the desc->bd will not be freed without this change.

---
 drivers/dma/imx-sdma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/dma/imx-sdma.c +3 -1
index 5215a5e39f3c..292f4c9a963d 100644
@@ -1428,10 +1428,12 @@ static struct sdma_desc *sdma_transfer_init(struct sdma_channel *sdmac,
 		sdma_config_ownership(sdmac, false, true, false);
 
 	if (sdma_load_context(sdmac))
-		goto err_desc_out;
+		goto err_bd_out;
 
 	return desc;
 
+err_bd_out:
+	sdma_free_bd(desc);
 err_desc_out:
 	kfree(desc);
 err_out:
Signature · 1 line
2.39.0
author maintainer
#13 lore raw

PATCH 13/14 cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()

In reply to Sasha Levin

From: Paulo Alcantara <[email protected]>

[ Upstream commit d6a49e8c4ca4d399ed65ac219585187fc8c2e2b1 ]

Fix this by initializing rc to 0 as cache_refresh_path() would not set it in case of success.

---
 fs/cifs/dfs_cache.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
fs/cifs/dfs_cache.c +3 -3
index 1f3efa7821a0..935c5781d878 100644
@@ -1046,10 +1046,10 @@ int dfs_cache_update_tgthint(const unsigned int xid, struct cifs_ses *ses,
 			     const struct nls_table *cp, int remap, const char *path,
 			     const struct dfs_cache_tgt_iterator *it)
 {
-	int rc;
-	const char *npath;
-	struct cache_entry *ce;
 	struct cache_dfs_tgt *t;
+	struct cache_entry *ce;
+	const char *npath;
+	int rc = 0;
 
 	npath = dfs_cache_canonical_path(path, cp, remap);
 	if (IS_ERR(npath))
Signature · 1 line
2.39.0
author maintainer
#14 lore raw

PATCH 14/14 ext4: deal with legacy signed xattr name hash values

In reply to Sasha Levin

From: Linus Torvalds <[email protected]>

[ Upstream commit f3bbac32475b27f49be201f896d98d4009de1562 ]

We potentially have old hashes of the xattr names generated on systems with signed 'char' types. Now that everybody uses '-funsigned-char', those hashes will no longer match.

This only happens if you use xattrs names that have the high bit set, which probably doesn't happen in practice, but the xfstest generic/454 shows it.

Instead of adding a new "signed xattr hash filesystem" bit and having to deal with all the possible combinations, just calculate the hash both ways if the first one fails, and always generate new hashes with the proper unsigned char version.

---
 fs/ext4/xattr.c | 41 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)
fs/ext4/xattr.c +39 -2
index b92da41e9640..6b5c5dfe6e31 100644
@@ -81,6 +81,8 @@ ext4_xattr_block_cache_find(struct inode *, struct ext4_xattr_header *,
 			    struct mb_cache_entry **);
 static __le32 ext4_xattr_hash_entry(char *name, size_t name_len, __le32 *value,
 				    size_t value_count);
+static __le32 ext4_xattr_hash_entry_signed(char *name, size_t name_len, __le32 *value,
+				    size_t value_count);
 static void ext4_xattr_rehash(struct ext4_xattr_header *);
 
 static const struct xattr_handler * const ext4_xattr_handler_map[] = {
@@ -470,8 +472,21 @@ ext4_xattr_inode_verify_hashes(struct inode *ea_inode,
 		tmp_data = cpu_to_le32(hash);
 		e_hash = ext4_xattr_hash_entry(entry->e_name, entry->e_name_len,
 					       &tmp_data, 1);
-		if (e_hash != entry->e_hash)
-			return -EFSCORRUPTED;
+		/* All good? */
+		if (e_hash == entry->e_hash)
+			return 0;
+
+		/*
+		 * Not good. Maybe the entry hash was calculated
+		 * using the buggy signed char version?
+		 */
+		e_hash = ext4_xattr_hash_entry_signed(entry->e_name, entry->e_name_len,
+							&tmp_data, 1);
+		if (e_hash == entry->e_hash)
+			return 0;
+
+		/* Still no match - bad */
+		return -EFSCORRUPTED;
 	}
 	return 0;
 }
@@ -3089,6 +3104,28 @@ static __le32 ext4_xattr_hash_entry(char *name, size_t name_len, __le32 *value,
 	return cpu_to_le32(hash);
 }
 
+/*
+ * ext4_xattr_hash_entry_signed()
+ *
+ * Compute the hash of an extended attribute incorrectly.
+ */
+static __le32 ext4_xattr_hash_entry_signed(char *name, size_t name_len, __le32 *value, size_t value_count)
+{
+	__u32 hash = 0;
+
+	while (name_len--) {
+		hash = (hash << NAME_HASH_SHIFT) ^
+		       (hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^
+		       (signed char)*name++;
+	}
+	while (value_count--) {
+		hash = (hash << VALUE_HASH_SHIFT) ^
+		       (hash >> (8*sizeof(hash) - VALUE_HASH_SHIFT)) ^
+		       le32_to_cpu(*value++);
+	}
+	return cpu_to_le32(hash);
+}
+
 #undef NAME_HASH_SHIFT
 #undef VALUE_HASH_SHIFT
 
Signature · 1 line
2.39.0