Skip to contentSkip to conversation

bpck_usb_firmware: Micro Solutions Backpack USB firmware loader

RFC PATCH New Ondrej Zary 1 participant 1 message Jan 26, 2023 USB

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 bpck_usb_firmware: Micro Solutions Backpack USB firmware loader

Add driver for loading firmware into Micro Solutions USB optical and hard drives. Once the firmware is loaded, they are USB mass storage compliant and will be handled by the usb-storage driver.

---
 drivers/usb/misc/Kconfig             |   8 ++
 drivers/usb/misc/Makefile            |   1 +
 drivers/usb/misc/bpck_usb_firmware.c | 113 +++++++++++++++++++++++++++
 drivers/usb/misc/ezusb.c             |   6 --
 include/linux/usb/ezusb.h            |   3 +
 5 files changed, 125 insertions(+), 6 deletions(-)
 create mode 100644 drivers/usb/misc/bpck_usb_firmware.c
drivers/usb/misc/Kconfig +8 -0
index a5f7652db7da..4c4e7cf35344 100644
@@ -311,3 +311,11 @@ config USB_ONBOARD_HUB
 	  this config will enable the driver and it will automatically
 	  match the state of the USB subsystem. If this driver is a
 	  module it will be called onboard_usb_hub.
+
+config USB_BACKPACK_FW
+	tristate "Micro Solutions Backpack firmware loading support"
+	select USB_EZUSB_FX2
+	help
+	  This driver loads firmware for Micro Solutions Backpack USB optical
+	  and hard drives. Once the firmware is loaded, they're USB mass
+	  storage compliant and thus handled by the usb-storage driver.
drivers/usb/misc/Makefile +1 -0
index 93581baec3a8..ef13699f50cc 100644
@@ -34,3 +34,4 @@ obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
 obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
 obj-$(CONFIG_BRCM_USB_PINMAP)		+= brcmstb-usb-pinmap.o
 obj-$(CONFIG_USB_ONBOARD_HUB)		+= onboard_usb_hub.o
+obj-$(CONFIG_USB_BACKPACK_FW)		+= bpck_usb_firmware.o
drivers/usb/misc/bpck_usb_firmware.c new file +113 -0

113 lines not on this page · raw message

drivers/usb/misc/ezusb.c +0 -6
index 78aaee56c2b7..30d6b1d8e265 100644
@@ -124,11 +124,6 @@ int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
 }
 EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download);
 
-#if 0
-/*
- * Once someone one needs these fx2 functions, uncomment them
- * and add them to ezusb.h and all should be good.
- */
 static struct ezusb_fx_type ezusb_fx2 = {
 	.cpucs_reg = 0xE600,
 	.max_internal_adress = 0x3FFF,
@@ -146,6 +141,5 @@ int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
 	return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path);
 }
 EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
-#endif
 
 MODULE_LICENSE("GPL");
include/linux/usb/ezusb.h +3 -0
index 487047162ca8..f00895cc7a8e 100644
@@ -5,5 +5,8 @@
 extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit);
 extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
 					    const char *firmware_path);
+extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit);
+extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
+				     const char *firmware_path);
 
 #endif /* __EZUSB_H */
Signature · 1 line
Ondrej Zary