kbuild: add a tool to generate a list of files ignored by git
PATCH v2 1/5 kbuild: add a tool to generate a list of files ignored by git
In short, the motivation of this commit is to build a source package without cleaning the source tree.
The deb-pkg and (src)rpm-pkg targets first run 'make clean' before creating a source tarball. Otherwise build artifacts such as *.o, *.a, etc. would be included in the tarball. Yet, the tarball ends up containing several garbage files since 'make clean' does not clean everything.
Cleaning the tree everytime is annoying since it makes the incremental build impossible. It is desirable to create a source tarball without cleaning the tree.
In fact, there are some ways to archive this.
The easiest way is 'git archive'. Actually, 'make perf-tar*-src-pkg' does this way, but I do not like it because it works only when the source tree is managed by git, and all files you want in the tarball must be committed in advance.
I want to make it work without relying on git. We can do this.
Files that are not tracked by git are generated files. We can list them out by parsing the .gitignore files. Of course, .gitignore does not cover all the cases, but it works well enough.
tar(1) claims to support it:
--exclude-vcs-ignores
Exclude files that match patterns read from VCS-specific ignore files. Supported files are: .cvsignore, .gitignore, .bzrignore, and .hgignore.
The best scenario would be to use 'tar --exclude-vcs-ignores', but this option does not work. --exclude-vcs-ignore does not understand any of the negation (!), preceding slash, following slash, etc.. So, this option is just useless.
Hence, I wrote this gitignore parser. The previous version [1], written in Python, was so slow. This version is implemented in C, so it works much faster.
This tool tarverses the source tree, parsing the .gitignore files. It prints the file paths that are not tracked by git. This is suitable to be passed to tar's --exclude-from= option.
[How to test this tool]
$ git clean -dfx
$ make -s -j$(nproc) defconfig all # or allmodconifg or whatever
$ git archive -o ../linux1.tar --prefix=./ HEAD
$ tar tf ../linux1.tar | LANG=C sort > ../file-list1 # files emitted by 'git archive'
$ make scripts_exclude
HOSTCC scripts/gen-exclude
$ scripts/gen-exclude --prefix=./ -o ../exclude-list
$ tar cf ../linux2.tar --exclude-from=../exclude-list .
$ tar tf ../linux2.tar | LANG=C sort > ../file-list2 # files emitted by 'tar'
$ diff ../file-list1 ../file-list2 | grep -E '^(<|>)'
< ./Documentation/devicetree/bindings/.yamllint
< ./drivers/clk/.kunitconfig
< ./drivers/gpu/drm/tests/.kunitconfig
< ./drivers/gpu/drm/vc4/tests/.kunitconfig
< ./drivers/hid/.kunitconfig
< ./fs/ext4/.kunitconfig
< ./fs/fat/.kunitconfig
< ./kernel/kcsan/.kunitconfig
< ./lib/kunit/.kunitconfig
< ./mm/kfence/.kunitconfig
< ./net/sunrpc/.kunitconfig
< ./tools/testing/selftests/arm64/tags/
< ./tools/testing/selftests/arm64/tags/.gitignore
< ./tools/testing/selftests/arm64/tags/Makefile
< ./tools/testing/selftests/arm64/tags/run_tags_test.sh
< ./tools/testing/selftests/arm64/tags/tags_test.c
< ./tools/testing/selftests/kvm/.gitignore
< ./tools/testing/selftests/kvm/Makefile
< ./tools/testing/selftests/kvm/config
< ./tools/testing/selftests/kvm/settingsThe source tarball contains most of files that are tracked by git. You see some diffs, but it is just because some .gitignore files are wrong.
$ git ls-files -i -c --exclude-per-directory=.gitignore Documentation/devicetree/bindings/.yamllint drivers/clk/.kunitconfig drivers/gpu/drm/tests/.kunitconfig drivers/hid/.kunitconfig fs/ext4/.kunitconfig fs/fat/.kunitconfig kernel/kcsan/.kunitconfig lib/kunit/.kunitconfig mm/kfence/.kunitconfig tools/testing/selftests/arm64/tags/.gitignore tools/testing/selftests/arm64/tags/Makefile tools/testing/selftests/arm64/tags/run_tags_test.sh tools/testing/selftests/arm64/tags/tags_test.c tools/testing/selftests/kvm/.gitignore tools/testing/selftests/kvm/Makefile tools/testing/selftests/kvm/config tools/testing/selftests/kvm/settings
[1]: https://lore.kernel.org/all/[email protected]/
---
Changes in v2:
- Reimplement in C
Makefile | 4 + scripts/.gitignore | 1 + scripts/Makefile | 2 +- scripts/gen-exclude.c | 639 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 645 insertions(+), 1 deletion(-) create mode 100644 scripts/gen-exclude.c
Makefile +4 -0
@@ -1652,6 +1652,10 @@ distclean: mrproper %pkg: include/config/kernel.release FORCE $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@ +PHONY += scripts_exclude +scripts_exclude: scripts_basic + $(Q)$(MAKE) $(build)=scripts scripts/gen-exclude + # Brief documentation of the typical targets used # ---------------------------------------------------------------------------
scripts/.gitignore +1 -0
@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only /asn1_compiler +/gen-exclude /generate_rust_target /insert-sys-cert /kallsyms
scripts/Makefile +1 -1
@@ -38,7 +38,7 @@ HOSTCFLAGS_sorttable.o += -DMCOUNT_SORT_ENABLED endif # The following programs are only built on demand -hostprogs += unifdef +hostprogs += gen-exclude unifdef # The module linker script is preprocessed on demand targets += module.lds
scripts/gen-exclude.c new file +639 -0
639 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH v2 2/5 kbuild: deb-pkg: create source package without cleaning
If you run 'make deb-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible.
Instead of cleaning, pass the exclude list to tar's --exclude-from option.
Previously, *.diff.gz contained some check-in files such as .clang-format, .cocciconfig.
With this commit, *.diff.gz will only contain the .config and debian/. The other source files will go into the tarball.
---
(no changes since v1)
scripts/Makefile.package | 31 ++++++++++++++++++++++++++----- scripts/package/mkdebian | 25 +++++++++++++++++++++++++ 2 files changed, 51 insertions(+), 5 deletions(-)
scripts/Makefile.package +26 -5
@@ -50,6 +50,25 @@ fi ; \ tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3) +# Source Tarball +# --------------------------------------------------------------------------- + +PHONY += gen-exclude +gen-exclude: + $(Q)$(MAKE) -f $(srctree)/Makefile scripts_exclude + +quiet_cmd_exclude_list = GEN $@ + cmd_exclude_list = scripts/gen-exclude --prefix=./ --rootdir=$(srctree) > $@; echo "./$@" >> $@ + +.exclude-list: gen-exclude + $(call cmd,exclude_list) + +quiet_cmd_tar = TAR $@ + cmd_tar = tar -I $(KGZIP) -c -f $@ -C $(srctree) --exclude-from=$< --exclude=./$@ --transform 's:^\.:linux:S' . + +%.tar.gz: .exclude-list + $(call cmd,tar) + # rpm-pkg # --------------------------------------------------------------------------- PHONY += rpm-pkg
@@ -81,12 +100,11 @@ binrpm-pkg: PHONY += deb-pkg deb-pkg: - $(MAKE) clean $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian - $(call cmd,src_tar,$(KDEB_SOURCENAME)) - origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ - mv $(KDEB_SOURCENAME).tar.gz ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz - +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) --source-option=-sP -i.git -us -uc + $(Q)origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ + $(MAKE) -f $(srctree)/scripts/Makefile.package ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz + +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) \ + --build=source,binary --source-option=-sP -nc -us -uc PHONY += bindeb-pkg bindeb-pkg:
@@ -174,4 +192,7 @@ help: @echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball' @echo ' perf-tarzst-src-pkg - Build $(perf-tar).tar.zst source tarball' +PHONY += FORCE +FORCE: + .PHONY: $(PHONY)
scripts/package/mkdebian +25 -0
@@ -84,6 +84,8 @@ set_debarch() { fi } +rm -rf debian + # Some variables and settings used throughout the script version=$KERNELRELEASE if [ -n "$KDEB_PKGVERSION" ]; then
@@ -135,6 +137,29 @@ fi mkdir -p debian/source/ echo "1.0" > debian/source/format +# Ugly: ignore anything except .config or debian/ +# (is there a cleaner way to do this?) +cat<<'EOF' > debian/source/local-options +diff-ignore + +extend-diff-ignore = ^[^.d] + +extend-diff-ignore = ^\.[^c] +extend-diff-ignore = ^\.c($|[^o]) +extend-diff-ignore = ^\.co($|[^n]) +extend-diff-ignore = ^\.con($|[^f]) +extend-diff-ignore = ^\.conf($|[^i]) +extend-diff-ignore = ^\.confi($|[^g]) +extend-diff-ignore = ^\.config. + +extend-diff-ignore = ^d($|[^e]) +extend-diff-ignore = ^de($|[^b]) +extend-diff-ignore = ^deb($|[^i]) +extend-diff-ignore = ^debi($|[^a]) +extend-diff-ignore = ^debia($|[^n]) +extend-diff-ignore = ^debian[^/] +EOF + echo $debarch > debian/arch extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev:native)" extra_build_depends="$extra_build_depends, $(if_enabled_echo CONFIG_SYSTEM_TRUSTED_KEYRING libssl-dev:native)"
Signature · 1 line
2.34.1
PATCH v2 3/5 kbuild: rpm-pkg: build binary packages from source rpm
In reply to Masahiro YamadaThe build rules of rpm-pkg and srcrpm-pkg are almost the same. Remove the code duplication.
Change rpm-pkg to build binary packages from the source package generated by srcrpm-pkg.
---
(no changes since v1)
scripts/Makefile.package | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
scripts/Makefile.package +3 -5
@@ -72,11 +72,9 @@ quiet_cmd_tar = TAR $@ # rpm-pkg # --------------------------------------------------------------------------- PHONY += rpm-pkg -rpm-pkg: - $(MAKE) clean - $(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec - $(call cmd,src_tar,$(KERNELPATH),kernel.spec) - +rpmbuild $(RPMOPTS) --target $(UTS_MACHINE)-linux -ta $(KERNELPATH).tar.gz \ +rpm-pkg: srpm = $(shell rpmspec --srpm --query --queryformat='%{name}-%{VERSION}-%{RELEASE}.src.rpm' kernel.spec) +rpm-pkg: srcrpm-pkg + +rpmbuild $(RPMOPTS) --target $(UTS_MACHINE)-linux -rb $(srpm) \ --define='_smp_mflags %{nil}' # srcrpm-pkg
Signature · 1 line
2.34.1
PATCH v2 4/5 kbuild: srcrpm-pkg: create source package without cleaning
In reply to Masahiro YamadaIf you run 'make (src)rpm-pkg', all objects are lost due to 'make clean', which makes the incremental builds impossible.
Instead of cleaning, pass the exclude list to tar's --exclude-from option.
Previously, the .config was contained in the source tarball.
With this commit, the source rpm consists of separate linux.tar.gz and .config.
Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option.
---
(no changes since v1)
scripts/Makefile.package | 50 +++------------------------------------- scripts/package/mkspec | 8 +++---- 2 files changed, 7 insertions(+), 51 deletions(-)
scripts/Makefile.package +3 -47
@@ -3,53 +3,11 @@ include $(srctree)/scripts/Kbuild.include -# RPM target -# --------------------------------------------------------------------------- -# The rpm target generates two rpm files: -# /usr/src/packages/SRPMS/kernel-2.6.7rc2-1.src.rpm -# /usr/src/packages/RPMS/i386/kernel-2.6.7rc2-1.<arch>.rpm -# The src.rpm files includes all source for the kernel being built -# The <arch>.rpm includes kernel configuration, modules etc. -# -# Process to create the rpm files -# a) clean the kernel -# b) Generate .spec file -# c) Build a tar ball, using symlink to make kernel version -# first entry in the path -# d) and pack the result to a tar.gz file -# e) generate the rpm files, based on kernel.spec -# - Use /. to avoid tar packing just the symlink - -# Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT, -# but the binrpm-pkg target can; for some reason O= gets ignored. - -# Remove hyphens since they have special meaning in RPM filenames -KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE)) KDEB_SOURCENAME ?= linux-upstream KBUILD_PKG_ROOTCMD ?="fakeroot -u" export KDEB_SOURCENAME -# Include only those top-level files that are needed by make, plus the GPL copy -TAR_CONTENT := Documentation LICENSES arch block certs crypto drivers fs \ - include init io_uring ipc kernel lib mm net rust \ - samples scripts security sound tools usr virt \ - .config Makefile \ - Kbuild Kconfig COPYING $(wildcard localversion*) MKSPEC := $(srctree)/scripts/package/mkspec -quiet_cmd_src_tar = TAR $(2).tar.gz - cmd_src_tar = \ -if test "$(objtree)" != "$(srctree)"; then \ - echo >&2; \ - echo >&2 " ERROR:"; \ - echo >&2 " Building source tarball is not possible outside the"; \ - echo >&2 " kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \ - echo >&2 " binrpm-pkg or bindeb-pkg target instead."; \ - echo >&2; \ - false; \ -fi ; \ -tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \ - --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3) - # Source Tarball # ---------------------------------------------------------------------------
@@ -80,12 +38,10 @@ rpm-pkg: srcrpm-pkg # srcrpm-pkg # --------------------------------------------------------------------------- PHONY += srcrpm-pkg -srcrpm-pkg: - $(MAKE) clean +srcrpm-pkg: linux.tar.gz $(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec - $(call cmd,src_tar,$(KERNELPATH),kernel.spec) - +rpmbuild $(RPMOPTS) --target $(UTS_MACHINE)-linux -ts $(KERNELPATH).tar.gz \ - --define='_smp_mflags %{nil}' --define='_srcrpmdir $(srctree)' + +rpmbuild $(RPMOPTS) --target $(UTS_MACHINE)-linux -bs kernel.spec \ + --define='_smp_mflags %{nil}' --define='_sourcedir .' --define='_srcrpmdir .' # binrpm-pkg # ---------------------------------------------------------------------------
scripts/package/mkspec +4 -4
@@ -47,7 +47,8 @@ sed -e '/^DEL/d' -e 's/^\t*//' <<EOF Group: System Environment/Kernel Vendor: The Linux Community URL: https://www.kernel.org -$S Source: kernel-$__KERNELRELEASE.tar.gz +$S Source0: linux.tar.gz +$S Source1: .config Provides: $PROVIDES $S BuildRequires: bc binutils bison dwarves $S BuildRequires: (elfutils-libelf-devel or libelf-devel) flex
@@ -83,9 +84,8 @@ $S$M This package provides kernel headers and makefiles sufficient to build modu $S$M against the $__KERNELRELEASE kernel package. $S$M $S %prep -$S %setup -q -$S rm -f scripts/basic/fixdep scripts/kconfig/conf -$S rm -f tools/objtool/{fixdep,objtool} +$S %setup -q -n linux +$S cp %{SOURCE1} . $S $S %build $S $MAKE %{?_smp_mflags} KERNELRELEASE=$KERNELRELEASE KBUILD_BUILD_VERSION=%{release}
Signature · 1 line
2.34.1
Re: [PATCH v2 4/5] kbuild: srcrpm-pkg: create source package without cleaning
Quoted 2 lines · Masahiro Yamada
- include init
io_uringipc kernel lib mm net rust \
For Rust, it is early to deal with packaging, so removing this from here should not hurt.
In any case, I quickly tried the series and noticed that the .src.rpm does not end in the SRPMS folder (as it did before) -- is that expected?
Thanks!
Cheers,
Miguel
Re: [PATCH v2 4/5] kbuild: srcrpm-pkg: create source package without cleaning
Quoted 7 lines · Miguel Ojeda
Quoted 2 lines · Masahiro Yamada
- include init
io_uringipc kernel lib mm net rust \For Rust, it is early to deal with packaging, so removing this from here should not hurt.
I guess you are talking about kernel-devel-*.rpm
(and linux-headers-.deb).
They are not useful for building external modules written in Rust since they do not contain *.rmeta etc. I am not caring about that because Rust support is not mature enough yet.
This series does not touch binary packages, rather it just changes how the source package is created.
I stopped hard-coding the top-level directories.
The resulting source package still contains all check-in files under rust/, so it is good from the source package perspective.
Quoted 3 lines
In any case, I quickly tried the series and noticed that the
.src.rpmdoes not end in theSRPMSfolder (as it did before) -- is that expected?
5/5 changed the behavior because rpm-pkg re-uses the *.src.rpm generated by srcrpm-pkg.
Having *.src.rpm in the kernel tree seems Redhat's preference. Commit 8818039f959b2efc0d6f2cb101f8061332f0c77e added --define='_srcrpmdir $(srctree)'.
In contrast, binary rpm files are generated under rpmbuild/RPMS/. I want to fix this inconsistency, though.
Signature · 2 lines
Best Regards Masahiro Yamada
Re: [PATCH v2 4/5] kbuild: srcrpm-pkg: create source package without cleaning
Quoted 8 lines · Masahiro Yamada
I guess you are talking about kernel-devel-*.rpm
(and linux-headers-.deb).They are not useful for building external modules written in Rust since they do not contain *.rmeta etc. I am not caring about that because Rust support is not mature enough yet.
Yeah, that is what I meant, i.e. since the Rust ML was Cc'd, I checked and wanted to say removing rust from there was OK (an Acked-by seemed too much for just that line :).
Quoted 3 lines
I stopped hard-coding the top-level directories.
The resulting source package still contains all check-in files underrust/, so it is good from the source package perspective.
Sounds good to me.
Quoted 2 lines
5/5 changed the behavior because rpm-pkg re-uses the *.src.rpm generated by srcrpm-pkg.
(3/5?)
Quoted 3 lines
Having *.src.rpm in the kernel tree seems Redhat's preference. Commit
8818039f959b2efc0d6f2cb101f8061332f0c77eadded --define='_srcrpmdir $(srctree)'.
Thanks for the details! I just noticed it, so I thought I would let you know just in case.
(Perhaps it could be useful to mention this change in the output in the commit message.)
Quoted 2 lines
In contrast, binary rpm files are generated under rpmbuild/RPMS/. I want to fix this inconsistency, though.
That would be nice.
Cheers,
Miguel
Re: [PATCH v2 4/5] kbuild: srcrpm-pkg: create source package without cleaning
Quoted 19 lines · Miguel Ojeda
Quoted 8 lines · Masahiro Yamada
I guess you are talking about kernel-devel-*.rpm
(and linux-headers-.deb).They are not useful for building external modules written in Rust since they do not contain *.rmeta etc. I am not caring about that because Rust support is not mature enough yet.
Yeah, that is what I meant, i.e. since the Rust ML was Cc'd, I checked and wanted to say removing
rustfrom there was OK (anAcked-byseemed too much for just that line :).Quoted 3 lines
I stopped hard-coding the top-level directories.
The resulting source package still contains all check-in files underrust/, so it is good from the source package perspective.
Quoted 6 lines
Sounds good to me.
Quoted 2 lines
5/5 changed the behavior because rpm-pkg re-uses the *.src.rpm generated by srcrpm-pkg.
(3/5?)
Yes.
Quoted 10 lines
Quoted 4 lines
Having *.src.rpm in the kernel tree seems Redhat's preference. Commit
8818039f959b2efc0d6f2cb101f8061332f0c77eadded --define='_srcrpmdir $(srctree)'.Thanks for the details! I just noticed it, so I thought I would let you know just in case.
(Perhaps it could be useful to mention this change in the output in the commit message.)
Fair enough.
I updated the commit description in v3.
Quoted 8 lines
Quoted 3 lines
In contrast, binary rpm files are generated under rpmbuild/RPMS/. I want to fix this inconsistency, though.
That would be nice.
Cheers,
Miguel
Signature · 2 lines
Best Regards Masahiro Yamada
PATCH v2 5/5 kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
In reply to Masahiro Yamadascripts/Makefile.package does not need to know the value of KDEB_SOURCENAME because the source name can be taken from debian/changelog by using dpkg-parsechangelog.
Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to scripts/package/mkdebian.
---
Changes in v2:
- New patch
scripts/Makefile.package | 23 +++++++++++++++-------- scripts/package/mkdebian | 2 +- 2 files changed, 16 insertions(+), 9 deletions(-)
scripts/Makefile.package +15 -8
@@ -3,9 +3,7 @@ include $(srctree)/scripts/Kbuild.include -KDEB_SOURCENAME ?= linux-upstream KBUILD_PKG_ROOTCMD ?="fakeroot -u" -export KDEB_SOURCENAME MKSPEC := $(srctree)/scripts/package/mkspec # Source Tarball
@@ -52,19 +50,28 @@ binrpm-pkg: +rpmbuild $(RPMOPTS) --define "_builddir $(objtree)" --target \ $(UTS_MACHINE)-linux -bb $(objtree)/binkernel.spec +# deb-pkg, bindeb-pkg +# --------------------------------------------------------------------------- + PHONY += deb-pkg -deb-pkg: - $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian - $(Q)origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\ - $(MAKE) -f $(srctree)/scripts/Makefile.package ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz +deb-pkg: source = $(shell dpkg-parsechangelog -S Source) +deb-pkg: orig-version = $(shell dpkg-parsechangelog -S Version | sed 's/-[^-]*$$//') +deb-pkg: debian + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package ../$(source)_$(orig-version).orig.tar.gz +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) \ --build=source,binary --source-option=-sP -nc -us -uc PHONY += bindeb-pkg -bindeb-pkg: - $(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian +bindeb-pkg: debian +dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) -b -nc -uc +quiet_cmd_debianize = GEN $@ + cmd_debianize = $(srctree)/scripts/package/mkdebian + +PHONY += debian +debian: + $(call cmd,debianize) + PHONY += intdeb-pkg intdeb-pkg: +$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
scripts/package/mkdebian +1 -1
@@ -95,7 +95,7 @@ else revision=$($srctree/init/build-version) packageversion=$version-$revision fi -sourcename=$KDEB_SOURCENAME +sourcename=${KDEB_SOURCENAME:-linux-upstream} if [ "$ARCH" = "um" ] ; then packagename=user-mode-linux
Signature · 1 line
2.34.1