pico-imx7d: Add support for the 2GB variant
PATCH 1/1 pico-imx7d: Add support for the 2GB variant
Add the board detection mechanism to be able to support the 2GB variant.
Based on the code from TechNexion U-Boot downstream tree.
Signed-off-by Fabio Estevam <[email protected]>
--- board/technexion/pico-imx7d/spl.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-)
board/technexion/pico-imx7d/spl.c +27 -3
@@ -61,6 +61,8 @@ static struct ddrc ddrc_regs_val = { .dramtmg0 = 0x09081109, .addrmap0 = 0x0000001f, .addrmap1 = 0x00080808, + .addrmap2 = 0x00000000, + .addrmap3 = 0x00000000, .addrmap4 = 0x00000f0f, .addrmap5 = 0x07070707, .addrmap6 = 0x0f0f0707,
@@ -100,16 +102,38 @@ static void gpr_init(void)writel (0x4F400005 , &gpr_regs->gpr[1 ]); } -static bool is_1g (void ) +/* +* Revision Detection +* +* GPIO1_12 GPIO1_13 +* 0 0 1GB DDR3 +* 0 1 2GB DDR3 +* 1 0 512MB DDR3 +*/ + +static int imx7d_pico_detect_board (void ) {gpio_direction_input (IMX_GPIO_NR (1 ,12 )); -return !gpio_get_value (IMX_GPIO_NR (1 ,12 )); +gpio_direction_input (IMX_GPIO_NR (1 ,13 )); + +return gpio_get_value (IMX_GPIO_NR (1 ,12 )) <<1 | +gpio_get_value (IMX_GPIO_NR (1 ,13 )); }static void ddr_init (void ) { -if (is_1g ()) +switch (imx7d_pico_detect_board ()) { +case 0 : ddrc_regs_val.addrmap6 =0x0f070707 ; +break ; +case 1 : + ddrc_regs_val.addrmap0 =0x0000001f ; + ddrc_regs_val.addrmap1 =0x00181818 ; + ddrc_regs_val.addrmap4 =0x00000f0f ; + ddrc_regs_val.addrmap5 =0x04040404 ; + ddrc_regs_val.addrmap6 =0x04040404 ; +break ; + }mx7_dram_cfg (&ddrc_regs_val, &ddrc_mp_val, &ddr_phy_regs_val, &calib_param);
Signature · 1 line
2.25.1
PATCH 1/1 pico-imx7d: Add support for the 2GB variant
Quoted 4 lines
Add the board detection mechanism to be able to support the 2GB variant.
Based on the code from TechNexion U-Boot downstream tree.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================