imx: Suggest the NXP ATF github repo
PATCH 1/1 imx: Suggest the NXP ATF github repo
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:
"QUIC repositories on this site will not receive any updates after March 31, 2022, and will be deleted on March 31, 2023."
Point to the NXP ATF github repo instead.
--- board/beacon/imx8mm/README | 2 +- board/beacon/imx8mn/README | 2 +- board/freescale/imx8qm_mek/README | 2 +- board/gateworks/venice/README | 2 +- board/google/imx8mq_phanbell/README | 2 +- board/ronetix/imx8mq-cm/README | 2 +- doc/board/advantech/imx8qm-rom7720-a1.rst | 2 +- doc/board/congatec/cgtqmx8.rst | 2 +- doc/board/kontron/sl-mx8mm.rst | 2 +- doc/board/nxp/imx8mm_evk.rst | 2 +- doc/board/nxp/imx8mn_evk.rst | 2 +- doc/board/nxp/imx8mp_evk.rst | 2 +- doc/board/nxp/imx8mq_evk.rst | 2 +- doc/board/nxp/imx8qxp_mek.rst | 2 +- doc/board/toradex/apalis-imx8.rst | 2 +- 15 files changed, 15 insertions(+), 15 deletions(-)
board/beacon/imx8mm/README +1 -1
@@ -11,7 +11,7 @@ Get and Build the ARM Trusted firmware ====================================== Note: $(srctree) is U-Boot source directory -$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ git clone https://github.com/nxp-imx/imx-atf $ git lf-5.10.72-2.2.0 $ make PLAT=imx8mm bl31 CROSS_COMPILE=aarch64-linux-gnu- $ cp build/imx8mm/release/bl31.bin $(srctree)
board/beacon/imx8mn/README +1 -1
@@ -11,7 +11,7 @@ Get and Build the ARM Trusted firmware ====================================== Note: $(srctree) is U-Boot source directory -$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ git clone https://github.com/nxp-imx/imx-atf $ git lf-5.10.72-2.2.0 $ make PLAT=imx8mn bl31 CROSS_COMPILE=aarch64-linux-gnu- $ cp build/imx8mn/release/bl31.bin $(srctree)
board/freescale/imx8qm_mek/README +1 -1
@@ -12,7 +12,7 @@ Quick Start Get and Build the ARM Trusted firmware ====================================== -$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ git clone https://github.com/nxp-imx/imx-atf $ cd imx-atf/ $ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga $ make PLAT=imx8qm bl31
board/gateworks/venice/README +1 -1
@@ -10,7 +10,7 @@ Quick Start Get and Build the ARM Trusted firmware ====================================== -$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ git clone https://github.com/nxp-imx/imx-atf $ git checkout imx_5.4.47_2.2.0 $ make PLAT=imx8mm CROSS_COMPILE=aarch64-linux-gnu- bl31 $ cp build/imx8mm/release/bl31.bin .
board/google/imx8mq_phanbell/README +1 -1
@@ -10,7 +10,7 @@ Quick Start Get and Build the ARM Trusted firmware ====================================== Note: srctree is U-Boot source directory -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf +Get ATF from: https://github.com/nxp-imx/imx-atf branch: imx_4.19.35_1.0.0 $ make PLAT=imx8mq bl31 $ cp build/imx8mq/release/bl31.bin $(builddir)
board/ronetix/imx8mq-cm/README +1 -1
@@ -9,7 +9,7 @@ Quick Start Get and Build the ARM Trusted firmware ====================================== -$ git clone https://source.codeaurora.org/external/imx/imx-atf +$ git clone https://github.com/nxp-imx/imx-atf $ cd imx-atf $ git checkout imx_4.19.35_1.0.0 $ make PLAT=imx8mq bl31
doc/board/advantech/imx8qm-rom7720-a1.rst +1 -1
@@ -19,7 +19,7 @@ Get and Build the ARM Trusted firmware .. code-block:: bash - $ git clone https://source.codeaurora.org/external/imx/imx-atf + $ git clone https://github.com/nxp-imx/imx-atf $ cd imx-atf/ $ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga $ make PLAT=imx8qm bl31
doc/board/congatec/cgtqmx8.rst +1 -1
@@ -19,7 +19,7 @@ Get and Build the ARM Trusted firmware .. code-block:: bash - $ git clone https://source.codeaurora.org/external/imx/imx-atf + $ git clone https://github.com/nxp-imx/imx-atf $ cd imx-atf/ $ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga $ make PLAT=imx8qm bl31
doc/board/kontron/sl-mx8mm.rst +1 -1
@@ -30,7 +30,7 @@ There are two sources for the TF-A. Mainline and NXP. Get the one you prefer **NXP's imx-atf** -1. Get TF-A from: https://source.codeaurora.org/external/imx/imx-atf, branch: imx_5.4.70_2.3.0 +1. Get TF-A from: https://github.com/nxp-imx/imx-atf, branch: imx_5.4.70_2.3.0 2. Apply the patch to select the correct UART for the console, otherwise the TF-A will lock up during boot. 3. Build
doc/board/nxp/imx8mm_evk.rst +1 -1
@@ -17,7 +17,7 @@ Get and Build the ARM Trusted firmware -------------------------------------- Note: builddir is U-Boot build directory (source directory for in-tree builds) -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf +Get ATF from: https://github.com/nxp-imx/imx-atf branch: imx_5.4.47_2.2.0 .. code-block:: bash
doc/board/nxp/imx8mn_evk.rst +1 -1
@@ -17,7 +17,7 @@ Get and Build the ARM Trusted firmware -------------------------------------- Note: srctree is U-Boot source directory -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf +Get ATF from: https://github.com/nxp-imx/imx-atf branch: imx_5.4.47_2.2.0 .. code-block:: bash
doc/board/nxp/imx8mp_evk.rst +1 -1
@@ -16,7 +16,7 @@ Quick Start Get and Build the ARM Trusted firmware -------------------------------------- -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf +Get ATF from: https://github.com/nxp-imx/imx-atf branch: imx_5.4.70_2.3.0 .. code-block:: bash
doc/board/nxp/imx8mq_evk.rst +1 -1
@@ -17,7 +17,7 @@ Get and Build the ARM Trusted firmware -------------------------------------- Note: srctree is U-Boot source directory -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf +Get ATF from: https://github.com/nxp-imx/imx-atf branch: imx_5.4.47_2.2.0 .. code-block:: bash
doc/board/nxp/imx8qxp_mek.rst +1 -1
@@ -19,7 +19,7 @@ Get and Build the ARM Trusted firmware .. code-block:: bash - $ git clone https://source.codeaurora.org/external/imx/imx-atf + $ git clone https://github.com/nxp-imx/imx-atf $ cd imx-atf/ $ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0 $ make PLAT=imx8qx bl31
doc/board/toradex/apalis-imx8.rst +1 -1
@@ -18,7 +18,7 @@ Get and Build the ARM Trusted Firmware .. code-block:: bash - $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf + $ git clone -b imx_4.14.78_1.0.0_ga https://github.com/nxp-imx/imx-atf $ cd imx-atf/ $ make PLAT=imx8qm bl31
Signature · 1 line
2.25.1
Quoted 6 lines
Am 13.01.2023 um 01:52 schrieb Fabio Estevam <[email protected]>:
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:
Quoted 6 lines
"QUIC repositories on this site will not receive any updates after March 31, 2022, and will be deleted on March 31, 2023."
Point to the NXP ATF github repo instead.
Signed-off-by Fabio Estevam <[email protected]>
Quoted 9 lines · Fabio Estevam
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:"QUIC repositories on this site will not receive any updates after March 31, 2022, and will be deleted on March 31, 2023."
Point to the NXP ATF github repo instead.
Signed-off-by Fabio Estevam <[email protected]>
[snip]
Quoted 9 lines · Fabio Estevam
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:"QUIC repositories on this site will not receive any updates after March 31, 2022, and will be deleted on March 31, 2023."
Point to the NXP ATF github repo instead.
Signed-off-by Fabio Estevam <[email protected]>
PATCH 1/1 imx: Suggest the NXP ATF github repo
In reply to Fabio EstevamQuoted 9 lines
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/imx/imx-atf:
"QUIC repositories on this site will not receive any updates after March 31, 2022, and will be deleted on March 31, 2023." Point to the NXP ATF github repo instead.Signed-off-by Fabio Estevam <[email protected]>Reviewed-by Oliver Graute <[email protected]>Reviewed-by Marcel Ziswiler <[email protected]>Reviewed-by Frieder Schrempf <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================