Skip to contentSkip to conversation

configs: imx8m: Prepare imx8m-beacon boards for HAB support

PATCH New Adam Ford 2 participants 2 messages Nov 19, 2022 – Jan 31, 2023

Subsystems (3)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 configs: imx8m: Prepare imx8m-beacon boards for HAB support

In order to enable HAB, FSL_CAAM, ARCH_MISC_INIT and SPL_CRYPTO should be enabled in Kconfig like other i.MX8M boards.

arch/arm/mach-imx/imx8m/Kconfig +6 -0
index a0715e8091..eadb2234b0 100644
@@ -233,6 +233,9 @@ config TARGET_IMX8MM_BEACON
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
+	select FSL_CAAM
+	select ARCH_MISC_INIT
+	select SPL_CRYPTO if SPL
 
 config TARGET_IMX8MN_BEACON
 	bool "imx8mn Beacon Embedded devkit"
@@ -240,6 +243,9 @@ config TARGET_IMX8MN_BEACON
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
+	select FSL_CAAM
+	select ARCH_MISC_INIT
+	select SPL_CRYPTO if SPL
 
 config TARGET_PHYCORE_IMX8MM
 	bool "PHYTEC PHYCORE i.MX8MM"
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/1 configs: imx8m: Prepare imx8m-beacon boards for HAB support

Quoted 19 lines

In order to enable HAB, FSL_CAAM, ARCH_MISC_INIT and SPL_CRYPTO should be enabled in Kconfig like other i.MX8M boards.

arch/arm/mach-imx/imx8m/Kconfig +3 -0
index a0715e8091..eadb2234b0 100644
@@ -233,6 +233,9 @@ config TARGET_IMX8MM_BEACON
 	select IMX8MM
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
+	select FSL_CAAM
+	select ARCH_MISC_INIT
+	select SPL_CRYPTO if SPL
 
 config TARGET_IMX8MN_BEACON
 	bool "imx8mn Beacon Embedded devkit"

arch/arm/mach-imx/imx8m/Kconfig config TARGET_IMX8MN_BEACON · line 251

Quoted 9 lines
arch/arm/mach-imx/imx8m/Kconfig +3 -0
@@ -240,6 +243,9 @@ config TARGET_IMX8MN_BEACON
 	select IMX8MN
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
+	select FSL_CAAM
+	select ARCH_MISC_INIT
+	select SPL_CRYPTO if SPL
 
 config TARGET_PHYCORE_IMX8MM
 	bool "PHYTEC PHYCORE i.MX8MM"

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================