Skip to contentSkip to conversation

arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform

PATCH RESEND Superseded Bartosz Golaszewski 4 participants 4 messages Feb 2, 2023

lore
Share & tools
lore

Bartosz Golaszewski

author
#0 lore raw

PATCH RESEND 1/1 arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform

From: Bartosz Golaszewski <[email protected]>

Enable the pinctrl, GCC clock and interconnect drivers in order to allow booting SA8775P boards. The drivers need to be built-in for QUPv3 and subsequently UART console to work.

Signed-off-by Bartosz Golaszewski <[email protected]>

---
All drivers are now in next so let's enable them.

 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
index 984553d55e17..998ca0e07689 100644
@@ -560,6 +560,7 @@ CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
 CONFIG_PINCTRL_SC8180X=y

@@ -1352,6 +1353,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_MSM8996=m
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y
 CONFIG_INTERCONNECT_QCOM_SC7280=y
 CONFIG_INTERCONNECT_QCOM_SC8180X=y
Signature · 1 line
2.37.2
Reviewed-by on v1 1/1
#2 lore raw
In reply to Bartosz Golaszewski
Quoted 7 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Enable the pinctrl, GCC clock and interconnect drivers in order to allow booting SA8775P boards. The drivers need to be built-in for QUPv3 and subsequently UART console to work.

Signed-off-by Bartosz Golaszewski <[email protected]>
Reviewed-by Dmitry Baryshkov <[email protected]>

Note, you didn't include linux-arm-msm into the To/Cc, so this patch might miss Bjorn's patchwork.

Quoted 26 lines

---
All drivers are now in next so let's enable them.

  arch/arm64/configs/defconfig | 2 ++
  1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
index 984553d55e17..998ca0e07689 100644
@@ -560,6 +560,7 @@ CONFIG_PINCTRL_QCM2290=y
  CONFIG_PINCTRL_QCS404=y
  CONFIG_PINCTRL_QDF2XXX=y
  CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_SA8775P=y
  CONFIG_PINCTRL_SC7180=y
  CONFIG_PINCTRL_SC7280=y
  CONFIG_PINCTRL_SC8180X=y

@@ -1352,6 +1353,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8916=m
  CONFIG_INTERCONNECT_QCOM_MSM8996=m
  CONFIG_INTERCONNECT_QCOM_OSM_L3=m
  CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_SA8775P=y
  CONFIG_INTERCONNECT_QCOM_SC7180=y
  CONFIG_INTERCONNECT_QCOM_SC7280=y
  CONFIG_INTERCONNECT_QCOM_SC8180X=y
Signature · 2 lines
With best wishes
Dmitry
#3 lore raw
Quoted 8 lines · Dmitry Baryshkov
Quoted 6 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Enable the pinctrl, GCC clock and interconnect drivers in order to allow booting SA8775P boards. The drivers need to be built-in for QUPv3 and subsequently UART console to work.

Quoted 7 lines
Quoted 1 line
Signed-off-by Bartosz Golaszewski <[email protected]>
Reviewed-by Dmitry Baryshkov <[email protected]>

Note, you didn't include linux-arm-msm into the To/Cc, so this patch might miss Bjorn's patchwork.

Thanks for the heads-up, I'll resend it if he doesn't pick it up in the following days.

Bart