package/libtraceevent: new package
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Maxime,
libtraceevent and libtracefs are libraries, thus should be positioned under "Target packages" -> "Libraries".
Introducing a "Debugging, profiling and benchmark" category here would probably be appropriate.
Tested successfully on x86_64 hardware.
Kind regards,
Andreas
Quoted 57 lines · Maxime Chevallier
Introduce the libtraceevent library, that used to be bundled with the trace-cmd tool. This library is now used by several tools and libraries such as trace-cmd, libtracefs and rtla.
This package tries to install libraries in
/usr/local/libby default, hence the redefinition of the "prefix" variable, so that the library gets installed in "/usr/lib" instead.The same applies to the pkgconfig handling of the proved
Makefile, which installs the .pc files in the/usr/localarea by default, hence the redefinition of thepkgconfig_dirto either the correct directory within the staging area, or to empty value for the target to avoid installing the .pc in that case.Signed-off-by Maxime Chevallier <[email protected]>--- DEVELOPERS | 3 +++ package/Config.in | 1 + package/libtraceevent/Config.in | 9 +++++++ package/libtraceevent/libtraceevent.mk | 33 ++++++++++++++++++++++++++ 4 files changed, 46 insertions(+) create mode 100644 package/libtraceevent/Config.in create mode 100644 package/libtraceevent/libtraceevent.mkDEVELOPERS +3
-0@@ -2106,6 +2106,9 @@ F: package/postgresql/ F: package/protozero/ F: package/timescaledb/ +N: Maxime Chevallier <[email protected]> +F: package/libtraceevent/ + N: Michael Durrant <[email protected]> F: board/arcturus/ F: configs/arcturus_ucp1020_defconfigpackage/Config.in +1
-0@@ -117,6 +117,7 @@ menu "Debugging, profiling and benchmark" source "package/kyua/Config.in" source "package/latencytop/Config.in" source "package/libbpf/Config.in" + source "package/libtraceevent/Config.in" source "package/lmbench/Config.in" source "package/lsof/Config.in" source "package/ltp-testsuite/Config.in"package/libtraceevent/Config.in new file +0
-0
package/libtraceevent/Config.in line 9
Quoted 9 lines
package/libtraceevent/Config.in new file +9
-0@@ -0,0 +1,9 @@ +config BR2_PACKAGE_LIBTRACEEVENT + bool "libtraceevent" + help + libtraceevent is a library that interfaces with the ftrace + subsystem in the linux kernel. + It used to be bundled directly in the trace-cmd + tool, but it was eventually extracted so that it can be used + by multiple other tools and libraries, such as libtracefs and + rtla.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hello Andreas,
Quoted 4 lines · On Sun, 05 Feb 2023 09:20:15 +0100 Andreas Ziegler <[email protected]> wrote:
Hi Maxime,
libtraceevent and libtracefs are libraries, thus should be positioned under "Target packages" -> "Libraries".
Oops my bad, I should have put them there indeed.
Quoted 2 lines
Introducing a "Debugging, profiling and benchmark" category here would probably be appropriate.
Good idea !
Quoted 1 line
Tested successfully on
x86_64hardware.
Thanks a lot ! I'll respin with the proposed changes then.
Best regards,
Maxime
Quoted 69 lines
Kind regards,
AndreasQuoted 65 lines · Maxime Chevallier
Introduce the libtraceevent library, that used to be bundled with the trace-cmd tool. This library is now used by several tools and libraries such as trace-cmd, libtracefs and rtla.
This package tries to install libraries in
/usr/local/libby default, hence the redefinition of the "prefix" variable, so that the library gets installed in "/usr/lib" instead.The same applies to the pkgconfig handling of the proved
Makefile, which
installs the .pc files in the/usr/localarea by default, hence the redefinition of thepkgconfig_dirto either the correct directory within the
staging area, or to empty value for the target to avoid installing the .pc
in that case.Signed-off-by Maxime Chevallier <[email protected]>--- DEVELOPERS | 3 +++ package/Config.in | 1 + package/libtraceevent/Config.in | 9 +++++++ package/libtraceevent/libtraceevent.mk | 33 ++++++++++++++++++++++++++ 4 files changed, 46 insertions(+) create mode 100644 package/libtraceevent/Config.in create mode 100644 package/libtraceevent/libtraceevent.mkDEVELOPERS +3
-0@@ -2106,6 +2106,9 @@ F: package/postgresql/ F: package/protozero/ F: package/timescaledb/ +N: Maxime Chevallier <[email protected]> +F: package/libtraceevent/ + N: Michael Durrant <[email protected]> F: board/arcturus/ F: configs/arcturus_ucp1020_defconfigpackage/Config.in +1
-0@@ -117,6 +117,7 @@ menu "Debugging, profiling and benchmark" source "package/kyua/Config.in" source "package/latencytop/Config.in" source "package/libbpf/Config.in" + source "package/libtraceevent/Config.in" source "package/lmbench/Config.in" source "package/lsof/Config.in" source "package/ltp-testsuite/Config.in"package/libtraceevent/Config.in new file +4
-0@@ -0,0 +1,9 @@ +config BR2_PACKAGE_LIBTRACEEVENT + bool "libtraceevent" + help + libtraceevent is a library that interfaces with the
Quoted 8 lines
package/libtraceevent/Config.in
Quoted 8 lines
ftrace
package/libtraceevent/Config.in new file +3
-0+ subsystem in the linux kernel. + It used to be bundled directly in the trace-cmd + tool, but it was eventually extracted so that it can beused
package/libtraceevent/Config.in new file +1
-0+ by multiple other tools and libraries, such aslibtracefs and
package/libtraceevent/Config.in new file +1
-0+ rtla.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 3/4] package/linux-tools: add rtla
In reply to a message not in the archiveHi Maxime,
I was able to build RTLA after some adaptions, see below.
Quoted 39 lines · Maxime Chevallier
The RealTime Linux Analysis tool includes a set of commands that relies on the osnoise and timerlat tracers from the ftrace kernel subsystem, allowing to analyze the lantency sources coming from the hardware and the kernel itself.
This tool was introduced in v5.17, and relies on libtracefs and libtraceevent, although libtraceevent itself is already a dependency for libtracefs.
Signed-off-by Maxime Chevallier <[email protected]>--- DEVELOPERS | 1 + package/linux-tools/Config.in | 10 +++++++ package/linux-tools/linux-tool-rtla.mk.in | 32 +++++++++++++++++++++++ 3 files changed, 43 insertions(+) create mode 100644 package/linux-tools/linux-tool-rtla.mk.inDEVELOPERS +1
-0@@ -2109,6 +2109,7 @@ F: package/timescaledb/ N: Maxime Chevallier <[email protected]> F: package/libtraceevent/ F: package/libtracefs +F: package/linux-tools/linux-tool-rtla.mk.in N: Michael Durrant <[email protected]> F: board/arcturus/package/linux-tools/Config.in +0
-0@@ -102,6 +102,16 @@ config
BR2_PACKAGE_LINUX_TOOLS_PERF_NEEDS_HOST_PYTHON3endif
package/linux-tools/Config.in
Quoted 2 lines
package/linux-tools/Config.in +2
-0+config BR2_PACKAGE_LINUX_TOOLS_RTLA + bool "rtla"
Since a version dependency exists, you might add:
depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17
Quoted 17 lines
package/linux-tools/Config.in +8
-0+ select BR2_PACKAGE_LINUX_TOOLS + select BR2_PACKAGE_LIBTRACEFS + help + Linux 5.17 and later has 2 new tracers, osnoise and timerlat. + There tracers allow performing latency analysis, for which + the rtla tool provides wrapper commands to visualize and + extrace latency traces and reports. + config BR2_PACKAGE_LINUX_TOOLS_SELFTESTS bool"selftests" depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS # bashpackage/linux-tools/linux-tool-rtla.mk.in new file +0
-0
package/linux-tools/linux-tool-rtla.mk.in line 9
Quoted 9 lines
package/linux-tools/linux-tool-rtla.mk.in new file +9
-0@@ -0,0 +1,32 @@ +################################################################################ +# +# rtla +# +################################################################################ + +LINUX_TOOLS += rtla + +RTLA_DEPENDENCIES = host-pkgconf libtracefs
RTLA needs some kernel features; better to include them here, saves time experimenting:
# linux kernel needs FTRACE, TIMERLAT_TRACER, HIST_TRIGGERS for RTLA to work ifeq ($(BR2_PACKAGE_LINUX_TOOLS_RTLA),y) define RTLA_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) $(call KCONFIG_ENABLE_OPT,CONFIG_TIMERLAT_TRACER) $(call KCONFIG_ENABLE_OPT,CONFIG_HIST_TRIGGERS) endef endif
package/linux-tools/linux-tool-rtla.mk.in line 14
Quoted 5 lines
package/linux-tools/linux-tool-rtla.mk.in new file +5
-0+RTLA_MAKE_OPTS = $(LINUX_MAKE_FLAGS) \ + CC=$(TARGET_CC) \ + LDFLAGS="$(TARGET_LDFLAGS)" \ + PKG_CONFIG_PATH=$(STAGING_DIR)/usr/lib/pkgconfig +
The RTLA Makefile unconditionally compiles with stack smashing protection; linking fails on builds configured without this feature:
# adapted from linux-tool-tmon.mk.in ifeq ($(BR2_TOOLCHAIN_HAS_SSP),) define RTLA_DISABLE_STACK_PROTECTOR $(SED) 's/-fstack-protector.* //' $(LINUX_DIR)/tools/tracing/rtla/Makefile endef endif
package/linux-tools/linux-tool-rtla.mk.in
Quoted 9 lines
package/linux-tools/linux-tool-rtla.mk.in new file +2
-0+define RTLA_BUILD_CMDS + $(Q)if ! grep install $(LINUX_DIR)/tools/tracing/rtla/MakefileQuoted 1 line
/dev/null2>&1 ; then \package/linux-tools/linux-tool-rtla.mk.in new file +1
-0+ echo "Your kernel version is too old and does not implement the rtlatool." ; \
package/linux-tools/linux-tool-rtla.mk.in new file +4
-0+ echo "At least kernel 5.17 must be used." ; \ + exit 1 ; \ + fi +
$(RTLA_DISABLE_STACK_PROTECTOR)
package/linux-tools/linux-tool-rtla.mk.in
Quoted 11 lines
package/linux-tools/linux-tool-rtla.mk.in new file +11
-0+ $(TARGET_MAKE_ENV) \ + $(MAKE) $(RTLA_MAKE_OPTS) \ + -C $(LINUX_DIR)/tools/tracing rtla +endef + +define RTLA_INSTALL_TARGET_CMDS + $(TARGET_MAKE_ENV) $(MAKE) -C $(LINUX_DIR)/tools/tracing \ + $(RTLA_MAKE_OPTS) \ + DESTDIR=$(TARGET_DIR) \ + rtla_install +endef
rtla_install fails with:
Makefile:34: *** NOTICE: rst2man required to generate man pages. Stop. because it tries to build and install man pages also. Better to use a custom install command:
# The rtla_install target tries to create and install manpages,
# which terminates with an error and cannot be disabled define RTLA_INSTALL_TARGET_CMDS $(INSTALL) -m 0755 -D $(LINUX_DIR)/tools/tracing/rtla/rtla \ $(TARGET_DIR)/usr/bin/rtla endef
Kind regards,
Andreas
Quoted 2 lines
--
2.39.1
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 3/4] package/linux-tools: add rtla
Hello Andreas,
Quoted 3 lines · On Sun, 05 Feb 2023 09:22:56 +0100 Andreas Ziegler <[email protected]> wrote:
Hi Maxime,
I was able to build RTLA after some adaptions, see below.
Thanks for the effort, I appreciate !
Quoted 40 lines · Maxime Chevallier
Quoted 39 lines
The RealTime Linux Analysis tool includes a set of commands that relies on the osnoise and timerlat tracers from the ftrace kernel subsystem, allowing to analyze the lantency sources coming from the hardware and the kernel itself.
This tool was introduced in v5.17, and relies on libtracefs and libtraceevent, although libtraceevent itself is already a dependency for
libtracefs.Signed-off-by Maxime Chevallier <[email protected]>--- DEVELOPERS | 1 + package/linux-tools/Config.in | 10 +++++++ package/linux-tools/linux-tool-rtla.mk.in | 32 +++++++++++++++++++++++ 3 files changed, 43 insertions(+) create mode 100644 package/linux-tools/linux-tool-rtla.mk.inDEVELOPERS +1
-0@@ -2109,6 +2109,7 @@ F: package/timescaledb/ N: Maxime Chevallier <[email protected]> F: package/libtraceevent/ F: package/libtracefs +F: package/linux-tools/linux-tool-rtla.mk.in N: Michael Durrant <[email protected]> F: board/arcturus/package/linux-tools/Config.in +0
-0@@ -102,6 +102,16 @@ config
BR2_PACKAGE_LINUX_TOOLS_PERF_NEEDS_HOST_PYTHON3
Quoted 7 lines
package/linux-tools/Config.in
Quoted 4 lines
endif
package/linux-tools/Config.in +2
-0+config BR2_PACKAGE_LINUX_TOOLS_RTLA + bool "rtla"Since a version dependency exists, you might add:
depends onBR2_TOOLCHAIN_HEADERS_AT_LEAST_5_17
Good call !
Quoted 33 lines
Quoted 20 lines
package/linux-tools/Config.in +4
-0+ select BR2_PACKAGE_LINUX_TOOLS + select BR2_PACKAGE_LIBTRACEFS + help + Linux 5.17 and later has 2 new tracers, osnoise andtimerlat.
package/linux-tools/Config.in +1
-0+ There tracers allow performing latency analysis, forwhich
package/linux-tools/Config.in +3
-0+ the rtla tool provides wrapper commands to visualize and + extrace latency traces and reports. + config BR2_PACKAGE_LINUX_TOOLS_SELFTESTS bool"selftests" depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS # bashpackage/linux-tools/linux-tool-rtla.mk.in new file +0
-0package/linux-tools/linux-tool-rtla.mk.in line 9
Quoted 9 lines
package/linux-tools/linux-tool-rtla.mk.in new file +9
-0@@ -0,0 +1,32 @@ +################################################################################ +# +# rtla +# +################################################################################ + +LINUX_TOOLS += rtla + +RTLA_DEPENDENCIES = host-pkgconf libtracefsRTLA needs some kernel features; better to include them here, saves time experimenting:
Quoted 9 lines
# linux kernel needs FTRACE, TIMERLAT_TRACER, HIST_TRIGGERS for RTLA to work ifeq ($(BR2_PACKAGE_LINUX_TOOLS_RTLA),y) define RTLA_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) $(call KCONFIG_ENABLE_OPT,CONFIG_TIMERLAT_TRACER) $(call KCONFIG_ENABLE_OPT,CONFIG_HIST_TRIGGERS) endef endif
Oh I wasn't aware that we could enable kernel options that way. I'll include them in the v2, along with CONFIG_OSNOISE_TRACER that is also required.
Quoted 9 lines
package/linux-tools/linux-tool-rtla.mk.in line 14
Quoted 5 lines
package/linux-tools/linux-tool-rtla.mk.in new file +5
-0+RTLA_MAKE_OPTS = $(LINUX_MAKE_FLAGS) \ + CC=$(TARGET_CC) \ + LDFLAGS="$(TARGET_LDFLAGS)" \ + PKG_CONFIG_PATH=$(STAGING_DIR)/usr/lib/pkgconfig +The RTLA
Makefileunconditionally compiles with stack smashing protection; linking fails on builds configured without this feature:
Quoted 7 lines
# adapted from linux-tool-tmon.mk.in ifeq ($(BR2_TOOLCHAIN_HAS_SSP),) define RTLA_DISABLE_STACK_PROTECTOR $(SED) 's/-fstack-protector.* //' $(LINUX_DIR)/tools/tracing/rtla/Makefile endef endif
Good catch too, I didn't see that.
Quoted 30 lines
package/linux-tools/linux-tool-rtla.mk.in
Quoted 10 lines
package/linux-tools/linux-tool-rtla.mk.in new file +2
-0+define RTLA_BUILD_CMDS + $(Q)if ! grep install$(LINUX_DIR)/tools/tracing/rtla/Makefile
Quoted 1 line
/dev/null2>&1 ; then \package/linux-tools/linux-tool-rtla.mk.in new file +1
-0+ echo "Your kernel version is too old and does notimplement the rtla tool." ; \
package/linux-tools/linux-tool-rtla.mk.in new file +4
-0+ echo "At least kernel 5.17 must be used." ; \ + exit 1 ; \ + fi +$(RTLA_DISABLE_STACK_PROTECTOR)package/linux-tools/linux-tool-rtla.mk.in
Quoted 11 lines
package/linux-tools/linux-tool-rtla.mk.in new file +11
-0+ $(TARGET_MAKE_ENV) \ + $(MAKE) $(RTLA_MAKE_OPTS) \ + -C $(LINUX_DIR)/tools/tracing rtla +endef + +define RTLA_INSTALL_TARGET_CMDS + $(TARGET_MAKE_ENV) $(MAKE) -C $(LINUX_DIR)/tools/tracing \ + $(RTLA_MAKE_OPTS) \ + DESTDIR=$(TARGET_DIR) \ + rtla_install +endef
rtla_installfails with:
Makefile:34: *** NOTICE: rst2man required to generate man pages. Stop. because it tries to build and install man pages also. Better to use a custom install command:
Quoted 6 lines
# The
rtla_installtarget tries to create and install manpages,# which terminates with an error and cannot be disabled define RTLA_INSTALL_TARGET_CMDS $(INSTALL) -m 0755 -D $(LINUX_DIR)/tools/tracing/rtla/rtla \ $(TARGET_DIR)/usr/bin/rtla endef
Ok makes sense as well :)
Thanks a lot for the review, tests and fixes !
Maxime
Quoted 5 lines
Kind regards,
AndreasQuoted 2 lines
--
2.39.1
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 3/4] package/linux-tools: add rtla
Hi Maxime, *
Quoted 10 lines · Maxime Chevallier
Hello Andreas,
Quoted 3 lines · On Sun, 05 Feb 2023 09:22:56 +0100 Andreas Ziegler <[email protected]> wrote:
Hi Maxime,
I was able to build RTLA after some adaptions, see below.
Thanks for the effort, I appreciate !
You are welcome :-)
There is one more thing that might be improved:
On an aarch64 build, using an internal musl toolchain, I encountered the following build issue:
In file included from src/trace.h:2,
from src/osnoise.h:2,
from src/rtla.c:11:/home/data/buildroot.rpi64/host/bin/../aarch64-buildroot-linux-musl/sysroot/usr/include/tracefs/tracefs.h:50:35: error: unknown type name ‘cpu_set_t’
50 | cpu_set_t *set, size_tset_size);
| ^~~~~~~~~
(...)src/osnoise_top.c: In function ‘osnoise_top_main’:src/osnoise_top.c:618:26: warning: implicit declaration of function ‘tracefs_iterate_raw_events’; did you mean ‘tracefs_system_events’? [-Wimplicit-function-declaration]
618 | retval = tracefs_iterate_raw_events(trace->tep,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
| tracefs_system_events(...)
It seems that both libraries are compiled with _GNU_SOURCE
$ grep _GNU_SOURCE ../libtracefs-1.6.4/Makefile override CFLAGS += -D_GNU_SOURCE $(LIBTRACEEVENT_INCLUDES) $(INCLUDES) $ grep _GNU_SOURCE ../libtraceevent-1.7.1/Makefile override CFLAGS += $(udis86-flags) -D_GNU_SOURCE
but rtla defines it inconsistently
$ grep _GNU_SOURCE tools/tracing/rtla/Makefile
$ grep _GNU_SOURCE tools/tracing/rtla/src/*.[ch] tools/tracing/rtla/src/trace.c:#define _GNU_SOURCE
thereby missing some definitions from <sched.h>
Proposed fix below.
<cut>
Quoted 30 lines
Quoted 20 lines
Quoted 7 lines
package/linux-tools/linux-tool-rtla.mk.in new file +0
-0package/linux-tools/linux-tool-rtla.mk.in line 9
Quoted 9 lines
package/linux-tools/linux-tool-rtla.mk.in new file +9
-0@@ -0,0 +1,32 @@ +################################################################################ +# +# rtla +# +################################################################################ + +LINUX_TOOLS += rtla + +RTLA_DEPENDENCIES = host-pkgconf libtracefsRTLA needs some kernel features; better to include them here, saves time experimenting:
Quoted 9 lines
# linux kernel needs FTRACE, TIMERLAT_TRACER, HIST_TRIGGERS for RTLA to work ifeq ($(BR2_PACKAGE_LINUX_TOOLS_RTLA),y) define RTLA_LINUX_CONFIG_FIXUPS $(call KCONFIG_ENABLE_OPT,CONFIG_FTRACE) $(call KCONFIG_ENABLE_OPT,CONFIG_TIMERLAT_TRACER) $(call KCONFIG_ENABLE_OPT,CONFIG_HIST_TRIGGERS) endef endif
Quoted 6 lines
Oh I wasn't aware that we could enable kernel options that way. I'll include them in the v2, along with
CONFIG_OSNOISE_TRACERthat is also required.Quoted 2 lines
package/linux-tools/linux-tool-rtla.mk.in line 11
Quoted 2 lines
package/linux-tools/linux-tool-rtla.mk.in new file +2
-0+RTLA_MAKE_OPTS = $(LINUX_MAKE_FLAGS) \ + CC=$(TARGET_CC) \
Define _GNU_SOURCE to prevent the musl build error above. This generates a warning due to redefinition of symbol in trace.c, but it is less intrusive than patching the source code:
+ EXTRA_CFLAGS="-D_GNU_SOURCE" \
Quoted 54 lines
Quoted 7 lines
package/linux-tools/linux-tool-rtla.mk.in line 14
Quoted 3 lines
package/linux-tools/linux-tool-rtla.mk.in new file +3
-0+ LDFLAGS="$(TARGET_LDFLAGS)" \ + PKG_CONFIG_PATH=$(STAGING_DIR)/usr/lib/pkgconfig +The RTLA
Makefileunconditionally compiles with stack smashing protection; linking fails on builds configured without this feature:Quoted 7 lines
# adapted from linux-tool-tmon.mk.in ifeq ($(BR2_TOOLCHAIN_HAS_SSP),) define RTLA_DISABLE_STACK_PROTECTOR $(SED) 's/-fstack-protector.* //' $(LINUX_DIR)/tools/tracing/rtla/Makefile endef endifGood catch too, I didn't see that.
Quoted 30 lines
package/linux-tools/linux-tool-rtla.mk.in
Quoted 10 lines
package/linux-tools/linux-tool-rtla.mk.in new file +2
-0+define RTLA_BUILD_CMDS + $(Q)if ! grep install$(LINUX_DIR)/tools/tracing/rtla/Makefile
Quoted 1 line
/dev/null2>&1 ; then \package/linux-tools/linux-tool-rtla.mk.in new file +1
-0+ echo "Your kernel version is too old and does notimplement the rtla tool." ; \
package/linux-tools/linux-tool-rtla.mk.in new file +4
-0+ echo "At least kernel 5.17 must be used." ; \ + exit 1 ; \ + fi +$(RTLA_DISABLE_STACK_PROTECTOR)package/linux-tools/linux-tool-rtla.mk.in
Quoted 11 lines
package/linux-tools/linux-tool-rtla.mk.in new file +11
-0+ $(TARGET_MAKE_ENV) \ + $(MAKE) $(RTLA_MAKE_OPTS) \ + -C $(LINUX_DIR)/tools/tracing rtla +endef + +define RTLA_INSTALL_TARGET_CMDS + $(TARGET_MAKE_ENV) $(MAKE) -C $(LINUX_DIR)/tools/tracing \ + $(RTLA_MAKE_OPTS) \ + DESTDIR=$(TARGET_DIR) \ + rtla_install +endef
rtla_installfails with:
Makefile:34: *** NOTICE: rst2man required to generate man pages. Stop. because it tries to build and install man pages also. Better to use a custom install command:Quoted 6 lines
# The
rtla_installtarget tries to create and install manpages,# which terminates with an error and cannot be disabled define RTLA_INSTALL_TARGET_CMDS $(INSTALL) -m 0755 -D $(LINUX_DIR)/tools/tracing/rtla/rtla \ $(TARGET_DIR)/usr/bin/rtla endef
Quoted 11 lines
Ok makes sense as well :)
Thanks a lot for the review, tests and fixes !
Maxime
Quoted 5 lines
Kind regards,
AndreasQuoted 2 lines
--
2.39.1
Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot