doc: update ark guide
PATCH 1/1 doc: update ark guide
Include introduced FX2 PCIe ID and description.
--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
doc/guides/nics/ark.rst +20 -0
@@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on
@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex] + +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARK PMD +has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------
@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
Signature · 1 line
2.25.1
Quoted 23 lines · Shepard Siegel
Include introduced FX2 PCIe ID and description.
Signed-off-by Shepard Siegel <[email protected]>--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)doc/guides/nics/ark.rst +4
-0@@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe instances including: · line 309
Quoted 4 lines
doc/guides/nics/ark.rst +1
-0@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex]
Hi Shepard, Ed,
This device is not supported by ark driver, am I missing something?
Quoted 25 lines
doc/guides/nics/ark.rst +15
-0+ +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARK PMD +has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
Hi Ferruh,
The new FX2 device *is* supported by the ark driver as of DPDK 23.03. These changes bring the ark doc up to date for the upcoming release. -Shep
Quoted 64 lines · Ferruh Yigit
doc/guides/nics/ark.rst board. While specific capabilities such as number of
Quoted 12 lines · Shepard Siegel
Include introduced FX2 PCIe ID and description.
Signed-off-by Shepard Siegel <[email protected]>--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)doc/guides/nics/ark.rst +0
-0@@ -52,6 +52,10 @@ board. While specific capabilities such as number ofphysical
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe
Quoted 11 lines
doc/guides/nics/ark.rst +4
-0hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIeinstances including:
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe · line 307
Quoted 2 lines
doc/guides/nics/ark.rst +0
-0* ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for AgilexR-Tile]
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe instances including: · line 309
Quoted 2 lines
doc/guides/nics/ark.rst +1
-0* ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex]Hi Shepard, Ed,
This device is not supported by ark driver, am I missing something?
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe instances including:
Quoted 6 lines
doc/guides/nics/ark.rst +6
-0+ +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARKPMD
Quoted 19 lines
doc/guides/nics/ark.rst +9
-0+has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
Quoted 3 lines · Shepard Siegel
Hi Ferruh,
The new FX2 device *is* supported by the ark driver as of DPDK 23.03. These changes bring the ark doc up to date for the upcoming release.
I don't know what exactly 'FX2' device is, but I was referring to '1d6c:1022' device id.
Following is the device table from latest code [1], is '1d6c:1022' supported?
static const struct rte_pci_id pci_id_ark_map[] = {
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100d)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100e)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100f)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1010)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1017)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1018)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1019)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101a)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101b)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)},
{.vendor_id = 0, /* sentinel */ },
};[1]
https://elixir.bootlin.com/dpdk/v22.11.1/source/drivers/net/ark/ark_ethdev.c#L89
Quoted 71 lines
-Shep
On Fri, Feb 10, 2023 at 3:34 PM Ferruh Yigit <[email protected] <mailto:[email protected]>> wrote:
On 2/10/2023 7:38 PM, Shepard Siegel wrote:
> Include introduced FX2 PCIe ID and description.
>
> Signed-off-by: Shepard Siegel <[email protected] <mailto:[email protected]>>
> ---
>doc/guides/nics/ark.rst| 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --gita/doc/guides/nics/ark.rstb/doc/guides/nics/ark.rst> indexba00f14e80..39cd75064d100644
> ---a/doc/guides/nics/ark.rst
> +++b/doc/guides/nics/ark.rst
> @@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical
> hardware queue-pairs are negotiated; the driver is designed to > remain constant over a broad and extendable feature set. >
> +* FPGA Vendors Supported: AMD/Xilinx and Intel
> +* Number of RX/TX Queue-Pairs: up to 128
> +* PCIe Endpoint Technology: Gen3, Gen4, Gen5
> +
> Intentionally, Arkville by itself DOES NOT provide common NIC > capabilities such as offload or receive-side scaling (RSS). > These capabilities would be viewed as a gate-level "tax" on > @@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including:
> * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] > * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile]
> * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] > +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex]Hi Shepard, Ed,
This device is not supported by ark driver, am I missing something?
> +
> +Arkville RTL Core Configurations
> +-------------------------------------
> +
> +Arkville's RTL core may be configured by the user for three different > +datapath widths to balance throughput against FPGA logic area. The ARK PMD
> +has introspection on the RTL core configuration and acts accordingly. > +All three configurations present identical RTL user-facing AXI stream > +interfaces for both AMD/Xilinx and Intel FPGAs.
> +
> +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4)
> +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) > +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only)
>
> DPDK and Arkville Firmware Versioning
> -------------------------------------
> @@ -334,6 +352,8 @@ Supported Features
> ------------------
>
> * Dynamic ARK PMD extensions
> +* Dynamic per-queue MBUF (re)sizing up to 32KB
> +* SR-IOV, VF-based queue-segregation
> * Multiple receive and transmit queues
> * Jumbo frames up to 9K
> * Hardware Statistics
Yes, exactly, the 1d6c:1022 device is the new FX2 device that will be supported in the 22.03 release.
-Shep
Quoted 106 lines · Ferruh Yigit
Quoted 3 lines · Shepard Siegel
Hi Ferruh,
The new FX2 device *is* supported by the ark driver as of DPDK 23.03. These changes bring the ark doc up to date for the upcoming release.I don't know what exactly 'FX2' device is, but I was referring to '1d6c:1022' device id.
Following is the device table from latest code [1], is '1d6c:1022' supported?static const struct rte_pci_id pci_id_ark_map[] = { {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100d)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100f)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1010)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1017)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1018)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1019)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101a)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101b)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)}, {.vendor_id = 0, /* sentinel */ }, };[1]
https://elixir.bootlin.com/dpdk/v22.11.1/source/drivers/net/ark/ark_ethdev.c#L89
Quoted 42 lines
-Shep
On Fri, Feb 10, 2023 at 3:34 PM Ferruh Yigit <[email protected] <mailto:[email protected]>> wrote:
On 2/10/2023 7:38 PM, Shepard Siegel wrote: > Include introduced FX2 PCIe ID and description. > > Signed-off-by: Shepard Siegel <[email protected] <mailto:[email protected]>> > --- > doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst > index ba00f14e80..39cd75064d 100644 > --- a/doc/guides/nics/ark.rst > +++ b/doc/guides/nics/ark.rst > @@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical > hardware queue-pairs are negotiated; the driver is designed to > remain constant over a broad and extendable feature set. > > +* FPGA Vendors Supported: AMD/Xilinx and Intel > +* Number of RX/TX Queue-Pairs: up to 128 > +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 > + > Intentionally, Arkville by itself DOES NOT provide common NIC > capabilities such as offload or receive-side scaling (RSS). > These capabilities would be viewed as a gate-level "tax" on > @@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: > * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] > * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] > * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] > +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex] Hi Shepard, Ed,Quoted 7 lines
This device is not supported by ark driver, am I missing something? > + > +Arkville RTL Core Configurations > +------------------------------------- > + > +Arkville's RTL core may be configured by the user for threedifferent
Quoted 3 lines
Quoted 1 line
+datapath widths to balance throughput against FPGA logic area.
The ARK PMD
> +has introspection on the RTL core configuration and actsaccordingly.
Quoted 1 line
Quoted 1 line
+All three configurations present identical RTL user-facing AXI
stream
Quoted 18 lines
Quoted 17 lines
doc/guides/nics/ark.rst +7
-0+interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
I meant to say "supported in the 23.03 release." just now in my email. sorry for the typo!
Quoted 115 lines · Shepard Siegel
Yes, exactly, the 1d6c:1022 device is the new FX2 device that will be supported in the 22.03 release.
-Shep
Quoted 106 lines · Ferruh Yigit
Quoted 3 lines · Shepard Siegel
Hi Ferruh,
The new FX2 device *is* supported by the ark driver as of DPDK 23.03. These changes bring the ark doc up to date for the upcoming release.I don't know what exactly 'FX2' device is, but I was referring to '1d6c:1022' device id.
Following is the device table from latest code [1], is '1d6c:1022' supported?static const struct rte_pci_id pci_id_ark_map[] = { {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100d)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100f)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1010)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1017)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1018)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1019)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101a)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101b)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)}, {.vendor_id = 0, /* sentinel */ }, };[1]
https://elixir.bootlin.com/dpdk/v22.11.1/source/drivers/net/ark/ark_ethdev.c#L89
Quoted 42 lines
-Shep
On Fri, Feb 10, 2023 at 3:34 PM Ferruh Yigit <[email protected] <mailto:[email protected]>> wrote:
On 2/10/2023 7:38 PM, Shepard Siegel wrote: > Include introduced FX2 PCIe ID and description. > > Signed-off-by: Shepard Siegel <[email protected] <mailto:[email protected]>> > --- > doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst > index ba00f14e80..39cd75064d 100644 > --- a/doc/guides/nics/ark.rst > +++ b/doc/guides/nics/ark.rst > @@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical > hardware queue-pairs are negotiated; the driver is designed to > remain constant over a broad and extendable feature set. > > +* FPGA Vendors Supported: AMD/Xilinx and Intel > +* Number of RX/TX Queue-Pairs: up to 128 > +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 > + > Intentionally, Arkville by itself DOES NOT provide common NIC > capabilities such as offload or receive-side scaling (RSS). > These capabilities would be viewed as a gate-level "tax" on > @@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: > * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] > * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] > * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] > +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex] Hi Shepard, Ed,Quoted 7 lines
This device is not supported by ark driver, am I missing something? > + > +Arkville RTL Core Configurations > +------------------------------------- > + > +Arkville's RTL core may be configured by the user for threedifferent
Quoted 3 lines
Quoted 1 line
+datapath widths to balance throughput against FPGA logic area.
The ARK PMD
> +has introspection on the RTL core configuration and actsaccordingly.
Quoted 1 line
Quoted 1 line
+All three configurations present identical RTL user-facing AXI
stream
Quoted 18 lines
Quoted 17 lines
doc/guides/nics/ark.rst +7
-0+interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
PATCH v2 1/1 doc: update ark guide
In reply to Shepard SiegelAdd ark PCIe device 1d6c:1022 FX2 to pci_id_ark_map. Include introduced FX2 PCIe ID and description.
--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ drivers/net/ark/ark_ethdev.c | 1 + 2 files changed, 21 insertions(+)
doc/guides/nics/ark.rst +20 -0
@@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on
@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex] + +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARK PMD +has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------
@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
drivers/net/ark/ark_ethdev.c +1 -0
@@ -99,6 +99,7 @@ static const struct rte_pci_id pci_id_ark_map[] = { {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)}, + {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1022)}, {.vendor_id = 0, /* sentinel */ }, };
Signature · 1 line
2.25.1
Quoted 3 lines · Shepard Siegel
Add ark PCIe device 1d6c:1022 FX2 to
pci_id_ark_map. Include introduced FX2 PCIe ID and description.
Thanks for v2, but this is no more just a documentation patch, can you please split the patch into two,
first one adds new device support and update documentation related to new device, with a 'net/ark:' title,
second one updates the document for extended information which is most of this patch
Quoted 63 lines
Signed-off-by Shepard Siegel <[email protected]>--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ drivers/net/ark/ark_ethdev.c | 1 + 2 files changed, 21 insertions(+)doc/guides/nics/ark.rst +20
-0@@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex] + +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARK PMD +has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statisticsdrivers/net/ark/ark_ethdev.c +1
-0@@ -99,6 +99,7 @@ static const struct rte_pci_id pci_id_ark_map[] = { {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)}, + {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1022)}, {.vendor_id = 0, /* sentinel */ }, };
Thank you Ferruh,
I understand now.
We will abandon this patch and do exactly as you suggest with two separate patches.
Thanks for your guidance. Look for the two patches ETA tomorrow. -Shep
Quoted 82 lines · Ferruh Yigit
Quoted 3 lines · Shepard Siegel
Add ark PCIe device 1d6c:1022 FX2 to
pci_id_ark_map. Include introduced FX2 PCIe ID and description.Thanks for v2, but this is no more just a documentation patch, can you please split the patch into two,
first one adds new device support and update documentation related to new device, with a 'net/ark:' title,
second one updates the document for extended information which is most of this patchdoc/guides/nics/ark.rst board. While specific capabilities such as number of
Quoted 11 lines
Signed-off-by Shepard Siegel <[email protected]>--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ drivers/net/ark/ark_ethdev.c | 1 + 2 files changed, 21 insertions(+)doc/guides/nics/ark.rst +0
-0@@ -52,6 +52,10 @@ board. While specific capabilities such as number ofphysical
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe
Quoted 11 lines
doc/guides/nics/ark.rst +4
-0hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIeinstances including:
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe · line 307
Quoted 2 lines
doc/guides/nics/ark.rst +0
-0* ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for AgilexR-Tile]
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe instances including:
Quoted 8 lines
doc/guides/nics/ark.rst +7
-0* ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex] + +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARKPMD
Quoted 31 lines
doc/guides/nics/ark.rst +9
-0+has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statisticsdrivers/net/ark/ark_ethdev.c +1
-0@@ -99,6 +99,7 @@ static const struct rte_pci_id pci_id_ark_map[] = { {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)}, + {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1022)}, {.vendor_id = 0, /* sentinel */ }, };
PATCH v3 1/2 net/ark: introduce Arkville FX2 PCIe device
In reply to Shepard SiegelThis commit introduces the Arkville FX2 PCIe device. Arkville FX2 provides support for PCIe Gen5x16 endpoints. FX2 is backwards-compatible with the net/ark PMD so that no changes other than the whitelist addition in this patch are needed for the basic operation of this device. Additional details are in a doc: patch with this submission.
--- drivers/net/ark/ark_ethdev.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ark/ark_ethdev.c +1 -0
@@ -99,6 +99,7 @@ static const struct rte_pci_id pci_id_ark_map[] = { {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)}, {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)}, + {RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1022)}, {.vendor_id = 0, /* sentinel */ }, };
Signature · 1 line
2.25.1
PATCH v3 2/2 doc: add Arkville FX2 PCIe device description
Update net/ark guide for clarity.
Include list of FX0, FX1 and FX2 PCIe devices.
--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
doc/guides/nics/ark.rst +20 -0
@@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on
@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex] + +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARK PMD +has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------
@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
Signature · 1 line
2.25.1
Re: [PATCH v3 2/2] doc: add Arkville FX2 PCIe device description
Quoted 24 lines · Shepard Siegel
Update net/ark guide for clarity.
Include list of FX0, FX1 and FX2 PCIe devices.Signed-off-by Shepard Siegel <[email protected]>--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)doc/guides/nics/ark.rst +4
-0@@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe instances including: · line 309
Quoted 4 lines
doc/guides/nics/ark.rst +1
-0@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including: * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile] * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex]
Can you please add new device related documentation to patch that adds new device?
At least above line is related to it, but if any other updates in this document is related to this new device that part also can go to other patch.
Or if it make more sense you can first introduce the document update patch for old devices, and later add new device and new device related documentation, like:
First patch adds:
+* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5)
Second patch adds new device and appends following:
+* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only)
Quoted 25 lines
doc/guides/nics/ark.rst +15
-0+ +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARK PMD +has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
Re: [PATCH v3 2/2] doc: add Arkville FX2 PCIe device description
Hi Ferruh,
I don't think the submission system will allow your request of a single patch with both a code change and document change since they are in different directories. I must say I'm confused by your request. In the current v3 which is not your preference, we split up the new device into the 0001 and the doc on the new device in the 0002.
Your current ask of "Can you please add new device related documentation to patch that adds new device?" was what we did back on v2. Guessing you don't like the mention of any other devices in the FX2 addition?
It feels crazy to have to have three different patches to essentially add a one-liner to our PCIe device alowlist! Am I making this way more complicated than it needs to be?
We will produce the sequence of three patches in the morning.
Would a cover letter help explain when we are doing with this patch? If there are elements that are not clear, let me know and we will work to clarify it.
Thank you for your efforts in this and countless other DPDK pushes!
best, Shep
Quoted 79 lines · Ferruh Yigit
doc/guides/nics/ark.rst board. While specific capabilities such as number of
Quoted 13 lines · Shepard Siegel
Update net/ark guide for clarity.
Include list of FX0, FX1 and FX2 PCIe devices.Signed-off-by Shepard Siegel <[email protected]>--- doc/guides/nics/ark.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)doc/guides/nics/ark.rst +0
-0@@ -52,6 +52,10 @@ board. While specific capabilities such as number ofphysical
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe
Quoted 11 lines
doc/guides/nics/ark.rst +4
-0hardware queue-pairs are negotiated; the driver is designed to remain constant over a broad and extendable feature set. +* FPGA Vendors Supported: AMD/Xilinx and Intel +* Number of RX/TX Queue-Pairs: up to 128 +* PCIe Endpoint Technology: Gen3, Gen4, Gen5 + Intentionally, Arkville by itself DOES NOT provide common NIC capabilities such as offload or receive-side scaling (RSS). These capabilities would be viewed as a gate-level "tax" on@@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIeinstances including:
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe · line 307
Quoted 2 lines
doc/guides/nics/ark.rst +0
-0* ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for AgilexR-Tile]
doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe instances including: · line 309
Quoted 2 lines
doc/guides/nics/ark.rst +1
-0* ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex]Can you please add new device related documentation to patch that adds new device?
At least above line is related to it, but if any other updates in this document is related to this new device that part also can go to other patch.Or if it make more sense you can first introduce the document update patch for old devices, and later add new device and new device related documentation, like:
First patch adds:
+* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5)Second patch adds new device and appends following:
+* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only)doc/guides/nics/ark.rst ARK PMD supports the following Arkville RTL PCIe instances including:
Quoted 6 lines
doc/guides/nics/ark.rst +6
-0+ +Arkville RTL Core Configurations +------------------------------------- + +Arkville's RTL core may be configured by the user for three different +datapath widths to balance throughput against FPGA logic area. The ARKPMD
Quoted 19 lines
doc/guides/nics/ark.rst +9
-0+has introspection on the RTL core configuration and acts accordingly. +All three configurations present identical RTL user-facing AXI stream +interfaces for both AMD/Xilinx and Intel FPGAs. + +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only) DPDK and Arkville Firmware Versioning -------------------------------------@@ -334,6 +352,8 @@ Supported Features ------------------ * Dynamic ARK PMD extensions +* Dynamic per-queue MBUF (re)sizing up to 32KB +* SR-IOV, VF-based queue-segregation * Multiple receive and transmit queues * Jumbo frames up to 9K * Hardware Statistics
Re: [PATCH v3 2/2] doc: add Arkville FX2 PCIe device description
Quoted 8 lines · Shepard Siegel
Hi Ferruh,
I don't think the submission system will allow your request of a single patch with both a code change and document change since they are in different directories. I must say I'm confused by your request. In the current v3 which is not your preference, we split up the new device into the 0001 and the doc on the new device in the 0002.
Hi Shepard,
We are accepting doc and code changes in a single patch, indeed this is preferred to have them together (although they are in different folders)
The logic is if someone looks the git history of specific document update she can find relevant code change, or vice versa. If they are separate and user finds a document that mentions a feature is enabled, it can be challenging to find when/where that feature is added in the code.
Quoted 8 lines
Your current ask of "Can you please add new device related documentation to patch that adds new device?" was what we did back on v2. Guessing you don't like the mention of any other devices in the FX2 addition?
It feels crazy to have to have three different patches to essentially add a one-liner to our PCIe device alowlist! Am I making this way more complicated than it needs to be?
I have no intention to make more complicated, but that one line change is adding a new device support, so it is important change to have its own patch. It may even require a release notes update and web page update later.
Your initial version was doing documentation update, and one of that update was documenting a device as supported although it is not in the code. You think it is not a bit deal to document unsupported devices as supported, but I disagree.
My ask is simple, do the code update to support new device and relevant doc update for new device in one patch, and rest of the documentation updates in another.
Please reach out to me from slack/IRC if it is still confusing.
Quoted 96 lines
We will produce the sequence of three patches in the morning.
Would a cover letter help explain when we are doing with this patch? If there are elements that are not clear, let me know and we will work to clarify it.
Thank you for your efforts in this and countless other DPDK pushes!
best, Shep
On Fri, Feb 10, 2023 at 9:13 PM Ferruh Yigit <[email protected] <mailto:[email protected]>> wrote:
On 2/11/2023 1:26 AM, Shepard Siegel wrote:
> Update net/ark guide for clarity.
> Include list of FX0, FX1 and FX2 PCIe devices.
>
> Signed-off-by: Shepard Siegel <[email protected] <mailto:[email protected]>>
> ---
>doc/guides/nics/ark.rst| 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --gita/doc/guides/nics/ark.rstb/doc/guides/nics/ark.rst> indexba00f14e80..39cd75064d100644
> ---a/doc/guides/nics/ark.rst
> +++b/doc/guides/nics/ark.rst
> @@ -52,6 +52,10 @@ board. While specific capabilities such as number of physical
> hardware queue-pairs are negotiated; the driver is designed to > remain constant over a broad and extendable feature set. >
> +* FPGA Vendors Supported: AMD/Xilinx and Intel
> +* Number of RX/TX Queue-Pairs: up to 128
> +* PCIe Endpoint Technology: Gen3, Gen4, Gen5
> +
> Intentionally, Arkville by itself DOES NOT provide common NIC > capabilities such as offload or receive-side scaling (RSS). > These capabilities would be viewed as a gate-level "tax" on > @@ -302,6 +306,20 @@ ARK PMD supports the following Arkville RTL PCIe instances including:
> * ``1d6c:101c`` - AR-ARK-SRIOV-VF [Arkville Virtual Function] > * ``1d6c:101e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover for Agilex R-Tile]
> * ``1d6c:101f`` - AR-TK242 [2x100GbE Packet Capture Device] > +* ``1d6c:1022`` - AR-ARKA-FX2 [Arkville 128B DPDK Data Mover for Agilex]Can you please add new device related documentation to patch that adds new device?
At least above line is related to it, but if any other updates in this document is related to this new device that part also can go to other patch.Or if it make more sense you can first introduce the document update patch for old devices, and later add new device and new device related documentation, like:
First patch adds:
+* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4) +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5)Second patch adds new device and appends following:
+* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only)> +
> +Arkville RTL Core Configurations
> +-------------------------------------
> +
> +Arkville's RTL core may be configured by the user for three different > +datapath widths to balance throughput against FPGA logic area. The ARK PMD
> +has introspection on the RTL core configuration and acts accordingly. > +All three configurations present identical RTL user-facing AXI stream > +interfaces for both AMD/Xilinx and Intel FPGAs.
> +
> +* ARK-FX0 - 256-bit 32B datapath (PCIe Gen3, Gen4)
> +* ARK-FX1 - 512-bit 64B datapath (PCIe Gen3, Gen4, Gen5) > +* ARK-FX2 - 1024-bit 128B datapath (PCIe Gen5x16 Only)
>
> DPDK and Arkville Firmware Versioning
> -------------------------------------
> @@ -334,6 +352,8 @@ Supported Features
> ------------------
>
> * Dynamic ARK PMD extensions
> +* Dynamic per-queue MBUF (re)sizing up to 32KB
> +* SR-IOV, VF-based queue-segregation
> * Multiple receive and transmit queues
> * Jumbo frames up to 9K
> * Hardware Statistics