scsi: lpfc: Fix double word in comments
Subsystems (2)
PATCH 1/1 scsi: lpfc: Fix double word in comments
Remove the repeated word "the" in comments.
Signed-off-by Bo Liu <[email protected]>
--- drivers/scsi/lpfc/lpfc_attr.c | 10 +++++----- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +- drivers/scsi/lpfc/lpfc_init.c | 4 ++-- drivers/scsi/lpfc/lpfc_mbox.c | 4 ++-- drivers/scsi/lpfc/lpfc_nvmet.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 2 +- 7 files changed, 13 insertions(+), 13 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +5 -5
@@ -2541,7 +2541,7 @@ lpfc_sriov_hw_max_virtfn_show(struct device *dev,/** * lpfc_enable_bbcr_set: Sets an attribute value. -* @phba: pointer the the adapter structure. +* @phba: pointer the adapter structure. * @val: integer attribute value. * * Description:
@@ -2632,7 +2632,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \* takes a default argument, a minimum and maximum argument. * * lpfc_##attr##_init: Initializes an attribute. -* @phba: pointer the the adapter structure. +* @phba: pointer the adapter structure. * @val: integer attribute value. * * Validates the min and max values then sets the adapter config field
@@ -2665,7 +2665,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \* into a function with the name lpfc_hba_queue_depth_set * * lpfc_##attr##_set: Sets an attribute value. -* @phba: pointer the the adapter structure. +* @phba: pointer the adapter structure. * @val: integer attribute value. * * Description:
@@ -2794,7 +2794,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \* lpfc_##attr##_init: validates the min and max values then sets the * adapter config field accordingly, or uses the default if out of range * and prints an error message. -* @phba: pointer the the adapter structure. +* @phba: pointer the adapter structure. * @val: integer attribute value. * * Returns:
@@ -2826,7 +2826,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \* lpfc_##attr##_set: validates the min and max values then sets the * adapter config field if in the valid range. prints error message * and does not set the parameter if invalid. -* @phba: pointer the the adapter structure. +* @phba: pointer the adapter structure. * @val: integer attribute value. * * Returns:
drivers/scsi/lpfc/lpfc_els.c +1 -1
@@ -8886,7 +8886,7 @@ lpfc_els_rcv_rtv(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,* @rrq: Pointer to the rrq struct. * * Build a ELS RRQ command and send it to the target. If the issue_iocb is -* Successful the the completion handler will clear the RRQ. +* Successful the completion handler will clear the RRQ. * * Return codes * 0 - Successfully sent rrq els iocb.
drivers/scsi/lpfc/lpfc_hbadisc.c +1 -1
@@ -2459,7 +2459,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,* @phba: pointer to lpfc hba data structure. * @fcf_index: the index of the fcf record to update * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED -* flag so the the round robin slection for the particular priority level +* flag so the round robin slection for the particular priority level * will try a different fcf record that does not have this bit set. * If the fcf record is re-read for any reason this flag is cleared brfore * adding it to the priority list.
drivers/scsi/lpfc/lpfc_init.c +2 -2
@@ -5502,7 +5502,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,bf_set (lpfc_mbx_read_top_link_spd, la, (bf_get (lpfc_acqe_link_speed, acqe_link))); -/* Fake the the following irrelvant fields */ +/* Fake the following irrelvant fields */ bf_set (lpfc_mbx_read_top_topology, la,LPFC_TOPOLOGY_PT_PT );bf_set (lpfc_mbx_read_top_alpa_granted, la,0 );bf_set (lpfc_mbx_read_top_il, la,0 );
@@ -12549,7 +12549,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)/* Mark CPU as IRQ not assigned by the kernel */ cpup->flag |=LPFC_CPU_MAP_UNASSIGN ; -/* If so, find a new_cpup thats on the the SAME +/* If so, find a new_cpup thats on the SAME * phys_id as cpup. start_cpu will start where we * left off so all unassigned entries don't get assgined * the IRQ of the first entry.
drivers/scsi/lpfc/lpfc_mbox.c +2 -2
@@ -2509,7 +2509,7 @@ lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox)* information via a READ_FCF mailbox command. This mailbox command also is used * to indicate where received unsolicited frames from this FCF will be sent. By * default this routine will set up the FCF to forward all unsolicited frames -* the the RQ ID passed in the @phba. This can be overridden by the caller for +* the RQ ID passed in the @phba. This can be overridden by the caller for * more complicated setups. **/ void
@@ -2577,7 +2577,7 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)* information via a READ_FCF mailbox command. This mailbox command also is used * to indicate where received unsolicited frames from this FCF will be sent. By * default this routine will set up the FCF to forward all unsolicited frames -* the the RQ ID passed in the @phba. This can be overridden by the caller for +* the RQ ID passed in the @phba. This can be overridden by the caller for * more complicated setups. **/ void
drivers/scsi/lpfc/lpfc_nvmet.c +1 -1
@@ -1469,7 +1469,7 @@ lpfc_nvmet_cleanup_io_context(struct lpfc_hba *phba)if (!infop)return ; -/* Cycle the the entire CPU context list for every MRQ */ +/* Cycle the entire CPU context list for every MRQ */ for (i =0 ; i < phba->cfg_nvmet_mrq; i++) {for_each_present_cpu (j) { infop =lpfc_get_ctx_list (phba, j, i);
drivers/scsi/lpfc/lpfc_sli.c +1 -1
@@ -20804,7 +20804,7 @@ lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,* the offset after the write object mailbox has completed. @size is used to * determine the end of the object and whether the eof bit should be set. * -* Return 0 is successful and offset will contain the the new offset to use +* Return 0 is successful and offset will contain the new offset to use * for the next write. * Return negative value for error cases. **/
Signature · 1 line
2.27.0