Skip to contentSkip to conversation

hw/mem: CXL Type-3 Volatile Memory Support

PATCH Superseded Jonathan Cameron 1 participant 3 messages Feb 17, 2023

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v2 cover hw/mem: CXL Type-3 Volatile Memory Support

v2:
- Fix an off by one in address space matching when both volatile and persistent memory is in present (meant 1st byte of persistent memory not readale)
- Picked up tags (thanks to all who tested!)

Based on following series (in order)
1. [PATCH v4 00/10] hw/cxl: CXL emulation cleanups and minor fixes for upstream
2. [PATCH v4 0/8] hw/cxl: RAS error emulation and injection
3. [PATCH 0/2] hw/cxl: Passthrough HDM decoder emulation

Based on: Message-Id: [email protected]
Based-on: Message-id: [email protected]
Based-on: Message-id: [email protected]

Kernel code is queued up in kernel.org cxl/pending.

Now we have some kernel code to test this against (and it looks good) I'd like to propose this series for upstream following 3 other series already proposed for inclusion:

Original cover letter with minor updates.

This patches provides 2 features to the CXL Type-3 Device:
1) Volatile Memory Region Support
2) Multi-Region support (1 Volatile, 1 Persistent)

Summary of Changes per-commit:
1) Whitespace updates to docs and tests
2) Refactor CDAT DSMAS Initialization for multi-region initialization Multi-Region and Volatile Memory support for CXL Type-3 Devices Test and Documentation updates

The final patch in this series makes 6 major changes to the type-3 device in order to implement multi-region and volatile region support
1) The HostMemoryBackend [hostmem] has been replaced by two [hostvmem] and [hostpmem] to store volatile and persistent memory respectively
2) The single AddressSpace has been replaced by two AddressSpaces [hostvmem_as] and [hostpmem_as] to map respective memdevs.
3) Each memory region size and total region are stored separately
4) The CDAT and DVSEC memory map entries have been updated:
a) if vmem is present, vmem is mapped at DPA(0)
b) if pmem is present
i) and vmem is present, pmem is mapped at DPA(vmem->size) ii) else, pmem is mapped at DPA(0)
c) partitioning of pmem is not supported in this patch set but has been discussed and this design should suffice.
5) Read/Write functions have been updated to access AddressSpaces according to the mapping described in #4. Access to the persistent address space is calculated by (dpa-vmem_len)
6) cxl-mailbox has been updated to report the respective size of volatile and persistent memory region

Gregory Price (2):
tests/qtest/cxl-test: whitespace, line ending cleanup hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)

 docs/system/devices/cxl.rst    |  49 ++++--
 hw/cxl/cxl-mailbox-utils.c     |  26 +--
 hw/mem/cxl_type3.c             | 300 +++++++++++++++++++++++++--------
 include/hw/cxl/cxl_device.h    |  11 +-
 tests/qtest/bios-tables-test.c |   8 +-
 tests/qtest/cxl-test.c         | 146 +++++++++++-----
 6 files changed, 398 insertions(+), 142 deletions(-)
Signature · 1 line
2.37.2
#1 lore raw

PATCH v2 1/2 tests/qtest/cxl-test: whitespace, line ending cleanup

From: Gregory Price <[email protected]>

Defines are starting to exceed line length limits, align them for cleanliness before making modifications.

---
 tests/qtest/cxl-test.c | 84 +++++++++++++++++++++++-------------------
 1 file changed, 46 insertions(+), 38 deletions(-)
tests/qtest/cxl-test.c +46 -38
index 61f25a72b6..eda2bbbbe6 100644
@@ -8,50 +8,58 @@
 #include "qemu/osdep.h"
 #include "libqtest-single.h"
 
-#define QEMU_PXB_CMD "-machine q35,cxl=on " \
-                     "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "  \
-                     "-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=4G "
+#define QEMU_PXB_CMD \
+    "-machine q35,cxl=on " \
+    "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+    "-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=4G "
 
-#define QEMU_2PXB_CMD "-machine q35,cxl=on "                            \
-                      "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 "  \
-                      "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
-                      "-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.targets.1=cxl.1,cxl-fmw.0.size=4G "
+#define QEMU_2PXB_CMD \
+    "-machine q35,cxl=on " \
+    "-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=52 " \
+    "-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=53 " \
+    "-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.targets.1=cxl.1,cxl-fmw.0.size=4G "
 
-#define QEMU_RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
+#define QEMU_RP \
+    "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 "
 
 /* Dual ports on first pxb */
-#define QEMU_2RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
-                 "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 "
+#define QEMU_2RP \
+    "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
+    "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 "
 
 /* Dual ports on each of the pxb instances */
-#define QEMU_4RP "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
-                 "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 " \
-                 "-device cxl-rp,id=rp2,bus=cxl.1,chassis=0,slot=2 " \
-                 "-device cxl-rp,id=rp3,bus=cxl.1,chassis=0,slot=3 "
-
-#define QEMU_T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
-                 "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M "    \
-                 "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 "
-
-#define QEMU_2T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M "    \
-                  "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M "    \
-                  "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
-                  "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M "    \
-                  "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M "    \
-                  "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 "
-
-#define QEMU_4T3D "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
-                  "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M "    \
-                  "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
-                  "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M "    \
-                  "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M "    \
-                  "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 " \
-                  "-object memory-backend-file,id=cxl-mem2,mem-path=%s,size=256M "    \
-                  "-object memory-backend-file,id=lsa2,mem-path=%s,size=256M "    \
-                  "-device cxl-type3,bus=rp2,memdev=cxl-mem2,lsa=lsa2,id=cxl-pmem2 " \
-                  "-object memory-backend-file,id=cxl-mem3,mem-path=%s,size=256M "    \
-                  "-object memory-backend-file,id=lsa3,mem-path=%s,size=256M "    \
-                  "-device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3,id=cxl-pmem3 "
+#define QEMU_4RP \
+    "-device cxl-rp,id=rp0,bus=cxl.0,chassis=0,slot=0 " \
+    "-device cxl-rp,id=rp1,bus=cxl.0,chassis=0,slot=1 " \
+    "-device cxl-rp,id=rp2,bus=cxl.1,chassis=0,slot=2 " \
+    "-device cxl-rp,id=rp3,bus=cxl.1,chassis=0,slot=3 "
+
+#define QEMU_T3D \
+    "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+    "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+    "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 "
+
+#define QEMU_2T3D \
+    "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+    "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+    "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
+    "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M " \
+    "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M " \
+    "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 "
+
+#define QEMU_4T3D \
+    "-object memory-backend-file,id=cxl-mem0,mem-path=%s,size=256M " \
+    "-object memory-backend-file,id=lsa0,mem-path=%s,size=256M " \
+    "-device cxl-type3,bus=rp0,memdev=cxl-mem0,lsa=lsa0,id=cxl-pmem0 " \
+    "-object memory-backend-file,id=cxl-mem1,mem-path=%s,size=256M " \
+    "-object memory-backend-file,id=lsa1,mem-path=%s,size=256M " \
+    "-device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1,id=cxl-pmem1 " \
+    "-object memory-backend-file,id=cxl-mem2,mem-path=%s,size=256M " \
+    "-object memory-backend-file,id=lsa2,mem-path=%s,size=256M " \
+    "-device cxl-type3,bus=rp2,memdev=cxl-mem2,lsa=lsa2,id=cxl-pmem2 " \
+    "-object memory-backend-file,id=cxl-mem3,mem-path=%s,size=256M " \
+    "-object memory-backend-file,id=lsa3,mem-path=%s,size=256M " \
+    "-device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3,id=cxl-pmem3 "
 
 static void cxl_basic_hb(void)
 {
Signature · 1 line
2.37.2
#2 lore raw

PATCH v2 2/2 hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)

In reply to Jonathan Cameron

From: Gregory Price <[email protected]>

This commit enables each CXL Type-3 device to contain one volatile memory region and one persistent region.

Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]

The existing [memdev] property has been deprecated and will default the memory region to a persistent memory region (although a user may assign the region to a ram or file backed region). It cannot be used in combination with the new [persistent-memdev] property.

Partitioning volatile memory from persistent memory is not yet supported.

Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.

---
v2:
- Fixed an off by one in address space selection.
- Gather tags.

---
 docs/system/devices/cxl.rst    |  49 ++++--
 hw/cxl/cxl-mailbox-utils.c     |  26 +--
 hw/mem/cxl_type3.c             | 300 +++++++++++++++++++++++++--------
 include/hw/cxl/cxl_device.h    |  11 +-
 tests/qtest/bios-tables-test.c |   8 +-
 tests/qtest/cxl-test.c         |  76 +++++++--
 6 files changed, 359 insertions(+), 111 deletions(-)
docs/system/devices/cxl.rst +39 -10
index f25783a4ec..89a41cff73 100644
@@ -300,7 +300,7 @@ Example topology involving a switch::
 
 Example command lines
 ---------------------
-A very simple setup with just one directly attached CXL Type 3 device::
+A very simple setup with just one directly attached CXL Type 3 Persistent Memory device::
 
   qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
   ...
@@ -308,7 +308,28 @@ A very simple setup with just one directly attached CXL Type 3 device::
   -object memory-backend-file,id=cxl-lsa1,share=on,mem-path=/tmp/lsa.raw,size=256M \
   -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
   -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
-  -device cxl-type3,bus=root_port13,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
+  -device cxl-type3,bus=root_port13,persistent-memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
+  -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G
+
+A very simple setup with just one directly attached CXL Type 3 Volatile Memory device::
+
+  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  ...
+  -object memory-backend-ram,id=vmem0,share=on,size=256M \
+  -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+  -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
+  -device cxl-type3,bus=root_port13,volatile-memdev=vmem0,id=cxl-vmem0 \
+  -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G
+
+The same volatile setup may optionally include an LSA region::
+
+  qemu-system-aarch64 -M virt,gic-version=3,cxl=on -m 4g,maxmem=8G,slots=8 -cpu max \
+  ...
+  -object memory-backend-ram,id=vmem0,share=on,size=256M \
+  -object memory-backend-file,id=cxl-lsa0,share=on,mem-path=/tmp/lsa.raw,size=256M \
+  -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+  -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
+  -device cxl-type3,bus=root_port13,volatile-memdev=vmem0,lsa=cxl-lsa0,id=cxl-vmem0 \
   -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G
 
 A setup suitable for 4 way interleave. Only one fixed window provided, to enable 2 way
@@ -328,13 +349,13 @@ the CXL Type3 device directly attached (no switches).::
   -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
   -device pxb-cxl,bus_nr=222,bus=pcie.0,id=cxl.2 \
   -device cxl-rp,port=0,bus=cxl.1,id=root_port13,chassis=0,slot=2 \
-  -device cxl-type3,bus=root_port13,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
+  -device cxl-type3,bus=root_port13,persistent-memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem0 \
   -device cxl-rp,port=1,bus=cxl.1,id=root_port14,chassis=0,slot=3 \
-  -device cxl-type3,bus=root_port14,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem1 \
+  -device cxl-type3,bus=root_port14,persistent-memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem1 \
   -device cxl-rp,port=0,bus=cxl.2,id=root_port15,chassis=0,slot=5 \
-  -device cxl-type3,bus=root_port15,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem2 \
+  -device cxl-type3,bus=root_port15,persistent-memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem2 \
   -device cxl-rp,port=1,bus=cxl.2,id=root_port16,chassis=0,slot=6 \
-  -device cxl-type3,bus=root_port16,memdev=cxl-mem4,lsa=cxl-lsa4,id=cxl-pmem3 \
+  -device cxl-type3,bus=root_port16,persistent-memdev=cxl-mem4,lsa=cxl-lsa4,id=cxl-pmem3 \
   -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.targets.1=cxl.2,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=8k
 
 An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
@@ -354,15 +375,23 @@ An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
   -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
   -device cxl-upstream,bus=root_port0,id=us0 \
   -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
-  -device cxl-type3,bus=swport0,memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
+  -device cxl-type3,bus=swport0,persistent-memdev=cxl-mem0,lsa=cxl-lsa0,id=cxl-pmem0,size=256M \
   -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
-  -device cxl-type3,bus=swport1,memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
+  -device cxl-type3,bus=swport1,persistent-memdev=cxl-mem1,lsa=cxl-lsa1,id=cxl-pmem1,size=256M \
   -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
-  -device cxl-type3,bus=swport2,memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
+  -device cxl-type3,bus=swport2,persistent-memdev=cxl-mem2,lsa=cxl-lsa2,id=cxl-pmem2,size=256M \
   -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
-  -device cxl-type3,bus=swport3,memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
+  -device cxl-type3,bus=swport3,persistent-memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,size=256M \
   -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
 
+Deprecations
+------------
+
+The Type 3 device [memdev] attribute has been deprecated in favor of the
+[persistent-memdev] attributes. [memdev] will default to a persistent memory
+device for backward compatibility and is incapable of being used in combination
+with [persistent-memdev].
+
 Kernel Configuration Options
 ----------------------------
 
hw/cxl/cxl-mailbox-utils.c +15 -11
index 206e04a4b8..cc9c8b7380 100644
@@ -141,7 +141,8 @@ static ret_code cmd_firmware_update_get_info(struct cxl_cmd *cmd,
     } QEMU_PACKED *fw_info;
     QEMU_BUILD_BUG_ON(sizeof(*fw_info) != 0x50);
 
-    if (cxl_dstate->pmem_size < CXL_CAPACITY_MULTIPLIER) {
+    if ((cxl_dstate->vmem_size < CXL_CAPACITY_MULTIPLIER) ||
+        (cxl_dstate->pmem_size < CXL_CAPACITY_MULTIPLIER)) {
         return CXL_MBOX_INTERNAL_ERROR;
     }
 
@@ -288,20 +289,20 @@ static ret_code cmd_identify_memory_device(struct cxl_cmd *cmd,
 
     CXLType3Dev *ct3d = container_of(cxl_dstate, CXLType3Dev, cxl_dstate);
     CXLType3Class *cvc = CXL_TYPE3_GET_CLASS(ct3d);
-    uint64_t size = cxl_dstate->pmem_size;
 
-    if (!QEMU_IS_ALIGNED(size, CXL_CAPACITY_MULTIPLIER)) {
+    if ((!QEMU_IS_ALIGNED(cxl_dstate->vmem_size, CXL_CAPACITY_MULTIPLIER)) ||
+        (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER))) {
         return CXL_MBOX_INTERNAL_ERROR;
     }
 
     id = (void *)cmd->payload;
     memset(id, 0, sizeof(*id));
 
-    /* PMEM only */
     snprintf(id->fw_revision, 0x10, "BWFW VERSION %02d", 0);
 
-    id->total_capacity = size / CXL_CAPACITY_MULTIPLIER;
-    id->persistent_capacity = size / CXL_CAPACITY_MULTIPLIER;
+    id->total_capacity = cxl_dstate->mem_size / CXL_CAPACITY_MULTIPLIER;
+    id->persistent_capacity = cxl_dstate->pmem_size / CXL_CAPACITY_MULTIPLIER;
+    id->volatile_capacity = cxl_dstate->vmem_size / CXL_CAPACITY_MULTIPLIER;
     id->lsa_size = cvc->get_lsa_size(ct3d);
 
     *len = sizeof(*id);
@@ -319,16 +320,19 @@ static ret_code cmd_ccls_get_partition_info(struct cxl_cmd *cmd,
         uint64_t next_pmem;
     } QEMU_PACKED *part_info = (void *)cmd->payload;
     QEMU_BUILD_BUG_ON(sizeof(*part_info) != 0x20);
-    uint64_t size = cxl_dstate->pmem_size;
 
-    if (!QEMU_IS_ALIGNED(size, CXL_CAPACITY_MULTIPLIER)) {
+    if ((!QEMU_IS_ALIGNED(cxl_dstate->vmem_size, CXL_CAPACITY_MULTIPLIER)) ||
+        (!QEMU_IS_ALIGNED(cxl_dstate->pmem_size, CXL_CAPACITY_MULTIPLIER))) {
         return CXL_MBOX_INTERNAL_ERROR;
     }
 
-    /* PMEM only */
-    part_info->active_vmem = 0;
+    part_info->active_vmem = cxl_dstate->vmem_size / CXL_CAPACITY_MULTIPLIER;
+    /*
+     * When both next_vmem and next_pmem are 0, there is no pending change to
+     * partitioning.
+     */
     part_info->next_vmem = 0;
-    part_info->active_pmem = size / CXL_CAPACITY_MULTIPLIER;
+    part_info->active_pmem = cxl_dstate->pmem_size / CXL_CAPACITY_MULTIPLIER;
     part_info->next_pmem = 0;
 
     *len = sizeof(*part_info);
hw/mem/cxl_type3.c +227 -73

432 lines not on this page · raw message

include/hw/cxl/cxl_device.h +8 -3
index d589f78202..edb9791bab 100644
@@ -119,8 +119,10 @@ typedef struct cxl_device_state {
         uint64_t host_set;
     } timestamp;
 
-    /* memory region for persistent memory, HDM */
+    /* memory region size, HDM */
+    uint64_t mem_size;
     uint64_t pmem_size;
+    uint64_t vmem_size;
 } CXLDeviceState;
 
 /* Initialize the register block for a device */
@@ -245,12 +247,15 @@ struct CXLType3Dev {
     PCIDevice parent_obj;
 
     /* Properties */
-    HostMemoryBackend *hostmem;
+    HostMemoryBackend *hostmem; /* deprecated */
+    HostMemoryBackend *hostvmem;
+    HostMemoryBackend *hostpmem;
     HostMemoryBackend *lsa;
     uint64_t sn;
 
     /* State */
-    AddressSpace hostmem_as;
+    AddressSpace hostvmem_as;
+    AddressSpace hostpmem_as;
     CXLComponentState cxl_cstate;
     CXLDeviceState cxl_dstate;
 
tests/qtest/bios-tables-test.c +4 -4
index d29a4e47af..3fe418af63 100644
@@ -1922,13 +1922,13 @@ static void test_acpi_q35_cxl(void)
                              " -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1"
                              " -device pxb-cxl,bus_nr=222,bus=pcie.0,id=cxl.2"
                              " -device cxl-rp,port=0,bus=cxl.1,id=rp1,chassis=0,slot=2"
-                             " -device cxl-type3,bus=rp1,memdev=cxl-mem1,lsa=lsa1"
+                             " -device cxl-type3,bus=rp1,persistent-memdev=cxl-mem1,lsa=lsa1"
                              " -device cxl-rp,port=1,bus=cxl.1,id=rp2,chassis=0,slot=3"
-                             " -device cxl-type3,bus=rp2,memdev=cxl-mem2,lsa=lsa2"
+                             " -device cxl-type3,bus=rp2,persistent-memdev=cxl-mem2,lsa=lsa2"
                              " -device cxl-rp,port=0,bus=cxl.2,id=rp3,chassis=0,slot=5"
-                             " -device cxl-type3,bus=rp3,memdev=cxl-mem3,lsa=lsa3"
+                             " -device cxl-type3,bus=rp3,persistent-memdev=cxl-mem3,lsa=lsa3"
                              " -device cxl-rp,port=1,bus=cxl.2,id=rp4,chassis=0,slot=6"
-                             " -device cxl-type3,bus=rp4,memdev=cxl-mem4,lsa=lsa4"
+                             " -device cxl-type3,bus=rp4,persistent-memdev=cxl-mem4,lsa=lsa4"
                              " -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=8k,"
                              "cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.targets.1=cxl.2,cxl-fmw.1.size=4G,cxl-fmw.1.interleave-granularity=8k",
                              tmp_path, tmp_path, tmp_path, tmp_path,
tests/qtest/cxl-test.c +66 -10

119 lines not on this page · raw message

Signature · 1 line
2.37.2