dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
Subsystems (4)
Keguang Zhang
maintainerPATCH v3 1/1 dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
Convert the Loongson1 interrupt controller dt-bindings to json-schema.
Signed-off-by Keguang Zhang <[email protected]>
Reviewed-by Krzysztof Kozlowski <[email protected]>
---
V2 -> V3: Fix the description
V1 -> V2: Drop the description part
--- .../loongson,ls1x-intc.txt | 24 --------- .../loongson,ls1x-intc.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt deleted +0 -24
@@ -1,24 +0,0 @@ -Loongson ls1x Interrupt Controller - -Required properties: - -- compatible : should be "loongson,ls1x-intc". Valid strings are: - -- reg : Specifies base physical address and size of the registers. -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value shall be 2. -- interrupts : Specifies the CPU interrupt the controller is connected to. - -Example: - -intc: interrupt-controller@1fd01040 { - compatible = "loongson,ls1x-intc"; - reg = <0x1fd01040 0x18>; - - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&cpu_intc>; - interrupts = <2>; -};
Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml new file +51 -0
51 lines not on this page · raw message
base-commit: 39459ce717b863556d7d75466fcbd904a6fbbbd8
Signature · 1 line
2.34.1
Quoted 7 lines · Keguang Zhang
Convert the Loongson1 interrupt controller dt-bindings to json-schema.
Signed-off-by Keguang Zhang <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>---
V2 -> V3: Fix the description
V1 -> V2: Drop the description part
Quoted 7 lines
--- .../loongson,ls1x-intc.txt | 24 --------- .../loongson,ls1x-intc.yaml | 51 +++++++++++++++++++ 2 files changed, 51 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
Applied, thanks!