kunit: fix bug in debugfs logs of parameterized tests
PATCH v2 1/3 kunit: fix bug in debugfs logs of parameterized tests
Fix bug in debugfs logs that causes individual parameterized results to not appear because the log is reinitialized (cleared) when each parameter is run.
Ensure these results appear in the debugfs logs and increase log size to allow for the size of parameterized results. As a result, append lines to the log directly rather than using an intermediate variable that can cause stack size warnings due to the increased log size.
Here is the debugfs log of ext4_inode_test which uses parameterized tests before the fix:
KTAP version 1
# Subtest: ext4_inode_test
1..1
# Totals: pass:16 fail:0 skip:0 total:16
ok 1 ext4_inode_test
As you can see, this log does not include any of the individual parametrized results.
After (in combination with the next two fixes to remove extra empty line and ensure KTAP valid format):
KTAP version 1
1..1
KTAP version 1
# Subtest: ext4_inode_test
1..1
KTAP version 1
# Subtest: inode_test_xtimestamp_decoding
ok 1 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits … (the rest of the individual parameterized tests)
ok 16 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra
# inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16 ok 1 inode_test_xtimestamp_decoding
# Totals: pass:16 fail:0 skip:0 total:16
ok 1 ext4_inode_test
---
Changes from v1 -> v2:
- Remove the use of the line variable in kunit_log_append that was causing stack size warnings.
- Add before and after to the commit message.
include/kunit/test.h | 2 +- lib/kunit/test.c | 17 +++++++++++------ 2 files changed, 12 insertions(+), 7 deletions(-)
include/kunit/test.h +1 -1
@@ -34,7 +34,7 @@ DECLARE_STATIC_KEY_FALSE(kunit_running);struct kunit ;/* Size of log associated with test. */ -#define KUNIT_LOG_SIZE 512 +#define KUNIT_LOG_SIZE 1500/* Maximum size of parameter description string. */ #define KUNIT_PARAM_DESC_SIZE 128
lib/kunit/test.c +11 -6
@@ -114,22 +114,26 @@ static void kunit_print_test_stats(struct kunit *test,*/ void kunit_log_append (char *log,const char *fmt, ...) { -char line[KUNIT_LOG_SIZE ];va_list args; -int len_left; +int len, log_len, len_left;if (!log)return ; - len_left =KUNIT_LOG_SIZE -strlen (log) -1 ; + log_len =strlen (log); + len_left =KUNIT_LOG_SIZE - log_len -1 ;if (len_left <=0 )return ; +/* Evaluate length of line to add to log */ va_start (args, fmt); -vsnprintf (line,sizeof (line), fmt, args); + len =vsnprintf (NULL ,0 , fmt, args);va_end (args); -strncat (log, line, len_left); +/* Print formatted line to the log */ +va_start (args, fmt); +vsnprintf (log + log_len,min (len, len_left), fmt, args); +va_end (args); }EXPORT_SYMBOL_GPL (kunit_log_append);
@@ -437,7 +441,6 @@ static void kunit_run_case_catch_errors(struct kunit_suite *suite,struct kunit_try_catch_context context;struct kunit_try_catch *try_catch; -kunit_init_test (test, test_case->name, test_case->log); try_catch = &test->try_catch; kunit_try_catch_init(try_catch,
@@ -533,6 +536,8 @@ int kunit_run_tests(struct kunit_suite *suite)struct kunit_result_stats param_stats = {0 }; test_case->status =KUNIT_SKIPPED ; +kunit_init_test (&test, test_case->name, test_case->log); +if (!test_case->generate_params) {/* Non-parameterised test. */ kunit_run_case_catch_errors (suite, test_case, &test);
base-commit: 82649c7c0da431d147a75c6ae768ee42c1053f53
Signature · 1 line
2.39.2.637.g21b0678d19-goog
PATCH v2 2/3 kunit: fix bug in the order of lines in debugfs logs
Fix bug in debugfs logs that causes an incorrect order of lines in the debugfs log.
Currently, the test counts lines that show the number of tests passed, failed, and skipped, as well as any suite diagnostic lines, appear prior to the individual results, which is a bug.
Ensure the order of printing for the debugfs log is correct. Additionally, add a KTAP header to so the debugfs logs can be valid KTAP.
This is an example of the kunit_status debugfs log prior to these fixes:
KTAP version 1
# Subtest: kunit_status
1..2
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
ok 1 kunit_status
Note the two lines with stats are out of order. This is the same debugfs log after the fixes (in combination with the third patch to remove the extra line):
KTAP version 1
1..1
KTAP version 1
# Subtest: kunit_status
1..2
ok 1 kunit_status_set_failure_test
ok 2 kunit_status_mark_skipped_test
# kunit_status: pass:2 fail:0 skip:0 total:2
# Totals: pass:2 fail:0 skip:0 total:2
ok 1 kunit_status
---
Changes from v1 -> v2:
- Add KTAP header.
- Ensure test result number is 1.
- Add before and after results to the commit message.
lib/kunit/debugfs.c | 14 ++++++++++++-- lib/kunit/test.c | 21 ++++++++++++++------- 2 files changed, 26 insertions(+), 9 deletions(-)
lib/kunit/debugfs.c +12 -2
@@ -55,14 +55,24 @@ static int debugfs_print_results(struct seq_file *seq, void *v)enum kunit_status success =kunit_suite_has_succeeded (suite);struct kunit_case *test_case; -if (!suite || !suite->log) +if (!suite)return 0 ; -seq_printf (seq,"%s" , suite->log); +/* Print KTAP header so the debugfs log can be parsed as valid KTAP. */ +seq_puts (seq,"KTAP version 1\n" ); +seq_puts (seq,"1..1\n" ); + +/* Print suite header because it is not stored in the test logs. */ +seq_puts (seq,KUNIT_SUBTEST_INDENT "KTAP version 1\n" ); +seq_printf (seq,KUNIT_SUBTEST_INDENT "# Subtest: %s\n" , suite->name); +seq_printf (seq,KUNIT_SUBTEST_INDENT "1..%zd\n" ,kunit_suite_num_test_cases (suite));kunit_suite_for_each_test_case (suite, test_case)debugfs_print_result (seq, suite, test_case); +if (suite->log) +seq_printf (seq,"%s" , suite->log); +seq_printf (seq,"%s %d %s\n" ,kunit_status_to_ok_not_ok (success),1 , suite->name);return 0 ;
lib/kunit/test.c +14 -7
@@ -151,10 +151,18 @@ EXPORT_SYMBOL_GPL(kunit_suite_num_test_cases);static void kunit_print_suite_start (struct kunit_suite *suite) { -kunit_log (KERN_INFO , suite,KUNIT_SUBTEST_INDENT "KTAP version 1\n" ); -kunit_log (KERN_INFO , suite,KUNIT_SUBTEST_INDENT "# Subtest: %s" , +/* +* We do not log the test suite header as doing so would +* mean debugfs display would consist of the test suite +* header prior to individual test results. +* Hence directly printk the suite status, and we will +* separately seq_printf() the suite header for the debugfs +* representation. +*/ +pr_info (KUNIT_SUBTEST_INDENT "KTAP version 1\n" ); +pr_info (KUNIT_SUBTEST_INDENT "# Subtest: %s\n" , suite->name); -kunit_log (KERN_INFO , suite,KUNIT_SUBTEST_INDENT "1..%zd" , +pr_info (KUNIT_SUBTEST_INDENT "1..%zd\n" ,kunit_suite_num_test_cases (suite)); }
@@ -171,10 +179,9 @@ static void kunit_print_ok_not_ok(void *test_or_suite,/* * We do not log the test suite results as doing so would -* mean debugfs display would consist of the test suite -* description and status prior to individual test results. -* Hence directly printk the suite status, and we will -* separately seq_printf() the suite status for the debugfs +* mean debugfs display would consist of an incorrect test +* number. Hence directly printk the suite result, and we will +* separately seq_printf() the suite results for the debugfs * representation. */ if (suite)
Signature · 1 line
2.39.2.637.g21b0678d19-goog
PATCH v2 3/3 kunit: fix bug of extra newline characters in debugfs logs
In reply to Rae MoarFix bug of the extra newline characters in debugfs logs. When a line is added to debugfs with a newline character at the end, an extra line appears in the debugfs log.
This is due to a discrepancy between how the lines are printed and how they are added to the logs. Remove this discrepancy by checking if the a newline character is present before adding a newline character to the log. This should closely match the printk behavior.
Add kunit_log_newline_test to provide test coverage for this issue. (Also, move kunit_log_test above suite definition to remove the unnecessary declaration prior to the suite definition)
As an example, say we add these two lines to the log:
kunit_log(..., “KTAP version 1\n”);kunit_log(..., “1..1”);
The debugfs log before this fix:
KTAP version 1
1..1
The debugfs log after this fix:
KTAP version 1
1..1
---
Changes from v1 -> v2:
- Changed the way extra newlines are removed. Instead of removing extra newline characters, add a newline if one is not present. This is a bit cleaner.
- Add before and after results to the commit message.
- Note: I looked into using KERN_CONT to match the printk behavior to vsnprintf but this could cause issues with KTAP printing on the same line as interrupting kernel messages. I also looked at adding KERN_CONT functionality to kunit_log and I did get this to work but it was a bit messy because it required a few calls to kunit_log_newline in kunit_run_tests. If this is very desired functionality, happy to add this to version 3.
include/kunit/test.h | 9 ++++++++- lib/kunit/kunit-test.c | 35 +++++++++++++++++++++++------------ lib/kunit/test.c | 14 ++++++++++++++ 3 files changed, 45 insertions(+), 13 deletions(-)
include/kunit/test.h +8 -1
@@ -375,6 +375,13 @@ static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfpvoid kunit_cleanup (struct kunit *test); +/** +* kunit_log_newline() - Add newline to the end of log if not already +* present at the end of the log. +* @log: The log to add the newline to. +*/ +void kunit_log_newline (char *log); + void __printf(2, 3) kunit_log_append(char *log, const char *fmt, ...); /**
@@ -420,7 +427,7 @@ void __printf(2, 3) kunit_log_append(char *log, const char *fmt, ...);#define kunit_log (lvl, test_or_suite, fmt, ...) \ do { \ printk(lvl fmt, ##__VA_ARGS__); \ - kunit_log_append((test_or_suite)->log, fmt "\n", \ + kunit_log_append((test_or_suite)->log, fmt, \ ##__VA_ARGS__); \ } while (0)
lib/kunit/kunit-test.c +23 -12
@@ -443,18 +443,6 @@ static struct kunit_suite kunit_resource_test_suite = { .test_cases = kunit_resource_test_cases, }; -static void kunit_log_test (struct kunit *test); - -static struct kunit_case kunit_log_test_cases[] = { -KUNIT_CASE (kunit_log_test), - {} -}; - -static struct kunit_suite kunit_log_test_suite = { - .name ="kunit-log-test" , - .test_cases = kunit_log_test_cases, -}; -static void kunit_log_test (struct kunit *test) {struct kunit_suite suite;
@@ -481,6 +469,29 @@ static void kunit_log_test(struct kunit *test)#endif } +static void kunit_log_newline_test (struct kunit *test) +{ +kunit_info (test,"Add newline\n" ); +if (test->log) { +KUNIT_ASSERT_NOT_NULL_MSG (test,strstr (test->log,"Add newline\n" ), +"Missing log line, full log:\n%s" , test->log); +KUNIT_EXPECT_NULL (test,strstr (test->log,"Add newline\n\n" )); + }else { +kunit_skip (test,"only useful when debugfs is enabled" ); + } +} + +static struct kunit_case kunit_log_test_cases[] = { +KUNIT_CASE (kunit_log_test), +KUNIT_CASE (kunit_log_newline_test), + {} +}; + +static struct kunit_suite kunit_log_test_suite = { + .name ="kunit-log-test" , + .test_cases = kunit_log_test_cases, +}; +static void kunit_status_set_failure_test (struct kunit *test) {struct kunit fake;
lib/kunit/test.c +14 -0
@@ -108,6 +108,17 @@ static void kunit_print_test_stats(struct kunit *test, stats.total); } +void kunit_log_newline (char *log) +{ +int log_len, len_left; + + log_len =strlen (log); + len_left =KUNIT_LOG_SIZE - log_len -1 ; + +if (log_len >0 && log[log_len -1 ] !='\n' ) +strncat (log,"\n" , len_left); +} +/* * Append formatted message to log, size of which is limited to * KUNIT_LOG_SIZE bytes (including null terminating byte).
@@ -134,6 +145,9 @@ void kunit_log_append(char *log, const char *fmt, ...)va_start (args, fmt);vsnprintf (log + log_len,min (len, len_left), fmt, args);va_end (args); + +/* Add newline to end of log if not already present. */ +kunit_log_newline (log); }EXPORT_SYMBOL_GPL (kunit_log_append);
Signature · 1 line
2.39.2.637.g21b0678d19-goog
Re: [PATCH v2 3/3] kunit: fix bug of extra newline characters in debugfs logs
Quoted 7 lines · Rae Moar
Fix bug of the extra newline characters in debugfs logs. When a line is added to debugfs with a newline character at the end, an extra line appears in the debugfs log.
This is due to a discrepancy between how the lines are printed and how they are added to the logs. Remove this discrepancy by checking if the a newline
Nit: "if the a"?
Quoted 11 lines
character is present before adding a newline character to the log. This should closely match the printk behavior.
Add
kunit_log_newline_testto provide test coverage for this issue. (Also, movekunit_log_testabove suite definition to remove the unnecessary declaration prior to the suite definition)As an example, say we add these two lines to the log:
kunit_log(..., “KTAP version 1\n”);kunit_log(..., “1..1”);
Nit: Please use regular quotes here ("), rather than the "smart quotes" (“”).
Quoted 7 lines
The debugfs log before this fix:
KTAP version 1
1..1
Quoted 8 lines
The debugfs log after this fix:
KTAP version 1
1..1Signed-off-by Rae Moar <[email protected]>---
This overall seems better. I haven't finished reviewing the series yet, but there are a few obvious issues with this patch still...
Most notably, kunit-log-test.kunit_log_test now fails.
-- David
Quoted 23 lines
Changes from v1 -> v2:
- Changed the way extra newlines are removed. Instead of removing extra newline characters, add a newline if one is not present. This is a bit cleaner.
- Add before and after results to the commit message.
- Note: I looked into usingKERN_CONTto match the printk behavior to vsnprintf but this could cause issues with KTAP printing on the same line as interrupting kernel messages. I also looked at addingKERN_CONTfunctionality tokunit_logand I did get this to work but it was a bit messy because it required a few calls tokunit_log_newlineinkunit_run_tests. If this is very desired functionality, happy to add this to version 3.include/kunit/test.h | 9 ++++++++- lib/kunit/kunit-test.c | 35 +++++++++++++++++++++++------------ lib/kunit/test.c | 14 ++++++++++++++ 3 files changed, 45 insertions(+), 13 deletions(-)include/kunit/test.h +0
-0
include/kunit/test.h static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfp · line 384
Quoted 10 lines
include/kunit/test.h +7
-0@@ -375,6 +375,13 @@ static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfpvoid kunit_cleanup (struct kunit *test); +/** +* kunit_log_newline() - Add newline to the end of log if not already +* present at the end of the log. +* @log: The log to add the newline to. +*/ +void kunit_log_newline (char *log); +
I don't think this function needs to be public. Maybe keep it static and internal to test.c?
Quoted 43 lines
include/kunit/test.h +1
-1void __printf(2, 3) kunit_log_append(char *log, const char *fmt, ...); /**@@ -420,7 +427,7 @@ void __printf(2, 3) kunit_log_append(char *log, const char *fmt, ...);#define kunit_log (lvl, test_or_suite, fmt, ...) \ do { \ printk(lvl fmt, ##__VA_ARGS__); \ - kunit_log_append((test_or_suite)->log, fmt "\n", \ + kunit_log_append((test_or_suite)->log, fmt, \ ##__VA_ARGS__); \ } while (0)lib/kunit/kunit-test.c +4
-12@@ -443,18 +443,6 @@ static struct kunit_suite kunit_resource_test_suite = { .test_cases = kunit_resource_test_cases, }; -static void kunit_log_test (struct kunit *test); - -static struct kunit_case kunit_log_test_cases[] = { -KUNIT_CASE (kunit_log_test), - {} -}; - -static struct kunit_suite kunit_log_test_suite = { - .name ="kunit-log-test" , - .test_cases = kunit_log_test_cases, -}; -static void kunit_log_test (struct kunit *test) {struct kunit_suite suite;@@ -481,6 +469,29 @@ static void kunit_log_test(struct kunit *test)#endif } +static void kunit_log_newline_test (struct kunit *test) +{ +kunit_info (test,"Add newline\n" ); +if (test->log) {
lib/kunit/kunit-test.c static void kunit_log_test(struct kunit *test) · line 485
Quoted 10 lines
lib/kunit/kunit-test.c +10
-0+KUNIT_ASSERT_NOT_NULL_MSG (test,strstr (test->log,"Add newline\n" ), +"Missing log line, full log:\n%s" , test->log); +KUNIT_EXPECT_NULL (test,strstr (test->log,"Add newline\n\n" )); + }else { +kunit_skip (test,"only useful when debugfs is enabled" ); + } +} + +static struct kunit_case kunit_log_test_cases[] = { +KUNIT_CASE (kunit_log_test),
This test is failing now:
[13:42:51] =============== kunit-log-test (2 subtests) ================ [13:42:51] put this in log.
[13:42:51] this too.
[13:42:51] add to suite log.
[13:42:51] along with this.
[13:42:51] # kunit_log_test: EXPECTATION FAILED atlib/kunit/kunit-test.c:459
[13:42:51] Expected strstr(test->log, "put this in log.") is not
null, but is
[13:42:51] # kunit_log_test: EXPECTATION FAILED atlib/kunit/kunit-test.c:461
[13:42:51] Expected strstr(test->log, "this too.") is not null, but is
[13:42:51] # kunit_log_test: EXPECTATION FAILED atlib/kunit/kunit-test.c:463
[13:42:51] Expected strstr(suite.log, "add to suite log.") is not
null, but is
[13:42:51] # kunit_log_test: EXPECTATION FAILED atlib/kunit/kunit-test.c:465
[13:42:51] Expected strstr(suite.log, "along with this.") is not
null, but is
[13:42:51] [FAILED] kunit_log_test
[13:42:51] [PASSED] kunit_log_newline_test
[13:42:51] # kunit-log-test: pass:1 fail:1 skip:0 total:2 [13:42:51] # Totals: pass:1 fail:1 skip:0 total:2
[13:42:51] ================= [FAILED] kunit-log-test ==================
Quoted 47 lines
lib/kunit/kunit-test.c +9
-0+ KUNIT_CASE(kunit_log_newline_test), + {} +}; + +static struct kunit_suite kunit_log_test_suite = { + .name ="kunit-log-test" , + .test_cases = kunit_log_test_cases, +}; +static void kunit_status_set_failure_test (struct kunit *test) {struct kunit fake;lib/kunit/test.c +14
-1@@ -108,6 +108,17 @@ static void kunit_print_test_stats(struct kunit *test, stats.total); } +void kunit_log_newline (char *log) +{ +int log_len, len_left; + + log_len =strlen (log); + len_left =KUNIT_LOG_SIZE - log_len -1 ; + +if (log_len >0 && log[log_len -1 ] !='\n' ) +strncat (log,"\n" , len_left); +} +/* * Append formatted message to log, size of which is limited to * KUNIT_LOG_SIZE bytes (including null terminating byte). @@ -134,6 +145,9 @@ void kunit_log_append(char *log, const char *fmt, ...)va_start (args, fmt);vsnprintf (log + log_len,min (len, len_left), fmt, args);va_end (args); + +/* Add newline to end of log if not already present. */ +kunit_log_newline (log); }EXPORT_SYMBOL_GPL (kunit_log_append); --2.39.2.637.g21b0678d19-goog
Re: [PATCH v2 3/3] kunit: fix bug of extra newline characters in debugfs logs
Quoted 11 lines · David Gow
Quoted 7 lines · Rae Moar
Fix bug of the extra newline characters in debugfs logs. When a line is added to debugfs with a newline character at the end, an extra line appears in the debugfs log.
This is due to a discrepancy between how the lines are printed and how they are added to the logs. Remove this discrepancy by checking if the a newline
Nit: "if the a"?
Thanks for catching this. I will change this to "if a."
Quoted 8 lines
Quoted 8 lines
character is present before adding a newline character to the log. This should closely match the printk behavior.
Add
kunit_log_newline_testto provide test coverage for this issue. (Also, movekunit_log_testabove suite definition to remove the unnecessary declaration prior to the suite definition)
Quoted 6 lines
Quoted 4 lines
As an example, say we add these two lines to the log:
kunit_log(..., “KTAP version 1\n”);kunit_log(..., “1..1”);Nit: Please use regular quotes here ("), rather than the "smart quotes" (“”).
Oops. Thanks. I will change these quotes.
Quoted 49 lines
Quoted 8 lines
The debugfs log before this fix:
KTAP version 1
1..1
Quoted 8 lines
The debugfs log after this fix:
KTAP version 1
1..1Signed-off-by Rae Moar <[email protected]>---
This overall seems better. I haven't finished reviewing the series yet, but there are a few obvious issues with this patch still...
Most notably, kunit-log-test.kunit_log_test now fails.
-- David
Quoted 26 lines
Changes from v1 -> v2:
- Changed the way extra newlines are removed. Instead of removing extra newline characters, add a newline if one is not present. This is a bit cleaner.
- Add before and after results to the commit message.
- Note: I looked into usingKERN_CONTto match the printk behavior to vsnprintf but this could cause issues with KTAP printing on the same line as interrupting kernel messages. I also looked at addingKERN_CONTfunctionality tokunit_logand I did get this to work but it was a bit messy because it required a few calls tokunit_log_newlineinkunit_run_tests. If this is very desired functionality, happy to add this to version 3.include/kunit/test.h | 9 ++++++++- lib/kunit/kunit-test.c | 35 +++++++++++++++++++++++------------ lib/kunit/test.c | 14 ++++++++++++++ 3 files changed, 45 insertions(+), 13 deletions(-)include/kunit/test.h +0
-0@@ -375,6 +375,13 @@ static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfpvoid kunit_cleanup (struct kunit *test);
Quoted 10 lines
include/kunit/test.h static inline void *kunit_kcalloc(struct kunit *test, size_t n, size_t size, gfp · line 384
Quoted 7 lines
include/kunit/test.h +7
-0+/** +* kunit_log_newline() - Add newline to the end of log if not already +* present at the end of the log. +* @log: The log to add the newline to. +*/ +void kunit_log_newline (char *log); +I don't think this function needs to be public. Maybe keep it static and internal to
test.c?
Changing this to static makes sense. I will update this.
Quoted 73 lines
Quoted 44 lines
include/kunit/test.h +1
-1void __printf(2, 3) kunit_log_append(char *log, const char *fmt, ...); /**@@ -420,7 +427,7 @@ void __printf(2, 3) kunit_log_append(char *log, const char *fmt, ...);#define kunit_log (lvl, test_or_suite, fmt, ...) \ do { \ printk(lvl fmt, ##__VA_ARGS__); \ - kunit_log_append((test_or_suite)->log, fmt "\n", \ + kunit_log_append((test_or_suite)->log, fmt, \ ##__VA_ARGS__); \ } while (0)lib/kunit/kunit-test.c +4
-12@@ -443,18 +443,6 @@ static struct kunit_suite kunit_resource_test_suite = { .test_cases = kunit_resource_test_cases, }; -static void kunit_log_test (struct kunit *test); - -static struct kunit_case kunit_log_test_cases[] = { -KUNIT_CASE (kunit_log_test), - {} -}; - -static struct kunit_suite kunit_log_test_suite = { - .name ="kunit-log-test" , - .test_cases = kunit_log_test_cases, -}; -static void kunit_log_test (struct kunit *test) {struct kunit_suite suite;@@ -481,6 +469,29 @@ static void kunit_log_test(struct kunit *test)#endif } +static void kunit_log_newline_test (struct kunit *test) +{ +kunit_info (test,"Add newline\n" ); +if (test->log) {lib/kunit/kunit-test.c static void kunit_log_test(struct kunit *test) · line 485
Quoted 10 lines
lib/kunit/kunit-test.c +10
-0+KUNIT_ASSERT_NOT_NULL_MSG (test,strstr (test->log,"Add newline\n" ), +"Missing log line, full log:\n%s" , test->log); +KUNIT_EXPECT_NULL (test,strstr (test->log,"Add newline\n\n" )); + }else { +kunit_skip (test,"only useful when debugfs is enabled" ); + } +} + +static struct kunit_case kunit_log_test_cases[] = { +KUNIT_CASE (kunit_log_test),This test is failing now:
[13:42:51] =============== kunit-log-test (2 subtests) ================ [13:42:51] put this in log.
[13:42:51] this too.
[13:42:51] add to suite log.
[13:42:51] along with this.
[13:42:51] #kunit_log_test: EXPECTATION FAILED atlib/kunit/kunit-test.c:459
[13:42:51] Expectedstrstr(test->log, "put this in log.")is not
null, but is
[13:42:51] #kunit_log_test: EXPECTATION FAILED atlib/kunit/kunit-test.c:461
[13:42:51] Expectedstrstr(test->log, "this too.")is not null, but is
[13:42:51] #kunit_log_test: EXPECTATION FAILED atlib/kunit/kunit-test.c:463
[13:42:51] Expectedstrstr(suite.log, "add to suite log.")is not
null, but is
[13:42:51] #kunit_log_test: EXPECTATION FAILED at
Quoted 9 lines
lib/kunit/kunit-test.c:465
[13:42:51] Expectedstrstr(suite.log, "along with this.")is not
null, but is
[13:42:51] [FAILED]kunit_log_test
[13:42:51] [PASSED]kunit_log_newline_test
[13:42:51] # kunit-log-test: pass:1 fail:1 skip:0 total:2 [13:42:51] # Totals: pass:1 fail:1 skip:0 total:2
[13:42:51] ================= [FAILED] kunit-log-test ==================
Sorry I did not catch this earlier. I must have tested on an outdated version of my code. The fix here is I am missing a "+ 1" in kunit_log_append(). This fix is for the first patch in this series and the specific line change is:
- len = vsnprintf(NULL, 0, fmt, args);
+ len = vsnprintf(NULL, 0, fmt, args) + 1;
I will update this in the next version.
Quoted 47 lines
Quoted 47 lines
lib/kunit/kunit-test.c +9
-0+ KUNIT_CASE(kunit_log_newline_test), + {} +}; + +static struct kunit_suite kunit_log_test_suite = { + .name ="kunit-log-test" , + .test_cases = kunit_log_test_cases, +}; +static void kunit_status_set_failure_test (struct kunit *test) {struct kunit fake;lib/kunit/test.c +14
-1@@ -108,6 +108,17 @@ static void kunit_print_test_stats(struct kunit *test, stats.total); } +void kunit_log_newline (char *log) +{ +int log_len, len_left; + + log_len =strlen (log); + len_left =KUNIT_LOG_SIZE - log_len -1 ; + +if (log_len >0 && log[log_len -1 ] !='\n' ) +strncat (log,"\n" , len_left); +} +/* * Append formatted message to log, size of which is limited to * KUNIT_LOG_SIZE bytes (including null terminating byte). @@ -134,6 +145,9 @@ void kunit_log_append(char *log, const char *fmt, ...)va_start (args, fmt);vsnprintf (log + log_len,min (len, len_left), fmt, args);va_end (args); + +/* Add newline to end of log if not already present. */ +kunit_log_newline (log); }EXPORT_SYMBOL_GPL (kunit_log_append); --2.39.2.637.g21b0678d19-goog