Skip to contentSkip to conversation

Struggling to build external python package on out of tree build

Buildroot Andreas Ziegler 4 participants 7 messages Feb 23, 2023 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi Alberto,

Quoted 27 lines · Alberto Fahrenkrog

Update,

if I change $(eval $(python-koala)) to $(eval $(python-package)) I still get the same error. I assume that might have been one mistake.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 12:42 PM
To: [email protected] <[email protected]>
Subject: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Hello all,

I'm trying to build a very simple custom python package following the instructions on the manual, yet I must be doing something very wrong as I get this result:

$ make python-koala
make[1]: *** No rule to make target 'python-koala'.  Stop.
make: *** [Makefile:23: _all] Error 2
Quoted 7 lines

I create my out of tree build with:
make -C ~/opt/buildroot-2021.02/ BR2_EXTERNAL=~/Projects/br_build O=~/Projects/br_build BR2_DL_DIR=~/Projects/br_build/downloads br_build_defconfig

On my "br_build" folder I have a Config.in file:
menu "Python-Libs"
source "~/Projects/br_build/package/python-koala/Config.in"
endmenu

Similar to the include file for configs, you also need an external.mk file for the project make files, with this content:

  include $(sort $(wildcard ~/Projects/br_build/package/*/*.mk))

Otherwise your .mk files will not be picked up.

Quoted 1 line

In "br_build/packages/python-koala/Config.in"

The package directory is usually named 'package', not sure if this is relevant (but Config.in /external.mk have to match it).

Quoted 20 lines

config BR2_PACKAGE_PYTHON_KOALA
??????bool "python-koala"
depends on BR2_PACKAGE_PYTHON3
??????help
?????? Python implementation of Koala Library

In "br_build/packages/python-koala/python-koala.mk"
################################################################################
#

# python-koala
#
################################################################################

PYTHON_KOALA_VERSION = 1.3.3
PYTHON_KOALA_SOURCE = $(PYTHON_KOALA_VERSION).tar.gz PYTHON_KOALA_SITE = https://mywebsite.com.au/ExternalCode/koala/archive/
PYTHON_KOALA_SETUP_TYPE = setuptools

$(eval $(python-koala))

Quoted 8 lines

If I run "make menuconfig" I can select or deselect the package, and it's selected per default on the br_build_defconfig (and in .config):
BR2_PACKAGE_PYTHON_KOALA=y

But if I try to run "make python-koala" I get the "no target" error. I'll still have a read and see what I might be doing wrong, but I'm very confused. Any ideas are very welcome.

Cheers,

Alberto

<cut>

Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#2 lore raw

Hi Andreas,

Thank you so much! That did it! Where in the manual is external.mk explained? I missed it for sure...

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Andreas Ziegler <[email protected]>
Sent: Thursday, February 23, 2023 2:49 PM
To: Alberto Fahrenkrog <[email protected]>
Cc: [email protected] <[email protected]>
Subject: Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]

Hi Alberto,

Quoted 39 lines · Alberto Fahrenkrog

Update,

if I change $(eval $(python-koala)) to $(eval $(python-package)) I still get the same error. I assume that might have been one mistake.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 12:42 PM
To: [email protected] <[email protected]>
Subject: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Hello all,

I'm trying to build a very simple custom python package following the instructions on the manual, yet I must be doing something very wrong as I get this result:

$ make python-koala
make[1]: *** No rule to make target 'python-koala'.  Stop.
make: *** [Makefile:23: _all] Error 2

I create my out of tree build with:
make -C ~/opt/buildroot-2021.02/ BR2_EXTERNAL=~/Projects/br_build O=~/Projects/br_build BR2_DL_DIR=~/Projects/br_build/downloads br_build_defconfig

Quoted 4 lines

On my "br_build" folder I have a Config.in file:
menu "Python-Libs"
source "~/Projects/br_build/package/python-koala/Config.in"
endmenu

Similar to the include file for configs, you also need an external.mk file for the project make files, with this content:

   include $(sort $(wildcard ~/Projects/br_build/package/*/*.mk))

Otherwise your .mk files will not be picked up.

Quoted 1 line

In "br_build/packages/python-koala/Config.in"

The package directory is usually named 'package', not sure if this is relevant (but Config.in /external.mk have to match it).

Quoted 25 lines

config BR2_PACKAGE_PYTHON_KOALA
??????bool "python-koala"
depends on BR2_PACKAGE_PYTHON3
??????help
?????? Python implementation of Koala Library

In "br_build/packages/python-koala/python-koala.mk"
################################################################################
#

# python-koala
#
################################################################################

PYTHON_KOALA_VERSION = 1.3.3 PYTHON_KOALA_SOURCE = $(PYTHON_KOALA_VERSION).tar.gz PYTHON_KOALA_SITE =
https://mywebsite.com.au/ExternalCode/koala/archive/
PYTHON_KOALA_SETUP_TYPE = setuptools

$(eval $(python-koala))

If I run "make menuconfig" I can select or deselect the package, and it's selected per default on the br_build_defconfig (and in .config):
BR2_PACKAGE_PYTHON_KOALA=y

Quoted 7 lines

But if I try to run "make python-koala" I get the "no target" error. I'll still have a read and see what I might be doing wrong, but I'm very confused. Any ideas are very welcome.

Cheers,

Alberto

<cut>

Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#3 lore raw

Ok, I see now that external.mk is explained in chapter 9. I jumped straight to chapter 18 and missed external.mk completely. And for some reason I never found external.mk on my google searches.

Thanks all for your help!

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 3:09 PM
To: [email protected] <[email protected]>
Subject: Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Hi Andreas,

Thank you so much! That did it! Where in the manual is external.mk explained? I missed it for sure...

Cheers,

Alberto
[cid:[email protected]]
Alberto​ Fahrenkrog

Senior Embedded Engineer
Orica ‑ Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]<mailto:[email protected]>
________________________________
From: buildroot <[email protected]> on behalf of Andreas Ziegler <[email protected]>
Sent: Thursday, February 23, 2023 2:49 PM
To: Alberto Fahrenkrog <[email protected]>
Cc: [email protected] <[email protected]>
Subject: Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]

Hi Alberto,

Quoted 39 lines · Alberto Fahrenkrog

Update,

if I change $(eval $(python-koala)) to $(eval $(python-package)) I still get the same error. I assume that might have been one mistake.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 12:42 PM
To: [email protected] <[email protected]>
Subject: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Hello all,

I'm trying to build a very simple custom python package following the instructions on the manual, yet I must be doing something very wrong as I get this result:

$ make python-koala
make[1]: *** No rule to make target 'python-koala'.  Stop.
make: *** [Makefile:23: _all] Error 2

I create my out of tree build with:
make -C ~/opt/buildroot-2021.02/ BR2_EXTERNAL=~/Projects/br_build O=~/Projects/br_build BR2_DL_DIR=~/Projects/br_build/downloads br_build_defconfig

Quoted 4 lines

On my "br_build" folder I have a Config.in file:
menu "Python-Libs"
source "~/Projects/br_build/package/python-koala/Config.in"
endmenu

Similar to the include file for configs, you also need an external.mk file for the project make files, with this content:

   include $(sort $(wildcard ~/Projects/br_build/package/*/*.mk))

Otherwise your .mk files will not be picked up.

Quoted 1 line

In "br_build/packages/python-koala/Config.in"

The package directory is usually named 'package', not sure if this is relevant (but Config.in /external.mk have to match it).

Quoted 25 lines

config BR2_PACKAGE_PYTHON_KOALA
??????bool "python-koala"
depends on BR2_PACKAGE_PYTHON3
??????help
?????? Python implementation of Koala Library

In "br_build/packages/python-koala/python-koala.mk"
################################################################################
#

# python-koala
#
################################################################################

PYTHON_KOALA_VERSION = 1.3.3 PYTHON_KOALA_SOURCE = $(PYTHON_KOALA_VERSION).tar.gz PYTHON_KOALA_SITE =
https://mywebsite.com.au/ExternalCode/koala/archive/
PYTHON_KOALA_SETUP_TYPE = setuptools

$(eval $(python-koala))

If I run "make menuconfig" I can select or deselect the package, and it's selected per default on the br_build_defconfig (and in .config):
BR2_PACKAGE_PYTHON_KOALA=y

Quoted 7 lines

But if I try to run "make python-koala" I get the "no target" error. I'll still have a read and see what I might be doing wrong, but I'm very confused. Any ideas are very welcome.

Cheers,

Alberto

<cut>

Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#4 lore raw

Hi all, I'm slowly getting ahead with this, and I still have a few more questions...

I'm trying to get a tar.gz file from a git repo, which needs authentication. The command that works manually is:
wget https://outwebsite.com/koala/archive/release1.2.3.tar.gz --header 'Authorization: token MY_TOKEN'

And the .mk file is configured as:
PYTHON_KOALA_SITE_METHOD = wget
PYTHON_KOALA_DL_OPTS = --header 'Authorization: token MY_TOKEN' PYTHON_KOALA_SITE = https://outwebsite.com/koala/archive/

The .mk file is being read correctly, but I can't figure out how to use DL_OPTS. The manual says DL_OPTS is a space separated list, but i see wget tries to use "token" or "MY_TOKEN" as the address. I tried a few different combinations of inverted commas, but none worked.

Thanks again,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 3:13 PM
To: [email protected] <[email protected]>
Subject: Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

Ok, I see now that external.mk is explained in chapter 9. I jumped straight to chapter 18 and missed external.mk completely. And for some reason I never found external.mk on my google searches.

Thanks all for your help!

Cheers,

Alberto
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 3:09 PM
To: [email protected] <[email protected]>
Subject: Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Hi Andreas,

Thank you so much! That did it! Where in the manual is external.mk explained? I missed it for sure...

Cheers,

Alberto
[cid:[email protected]]
Alberto​ Fahrenkrog

Senior Embedded Engineer
Orica ‑ Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]<mailto:[email protected]>
________________________________
From: buildroot <[email protected]> on behalf of Andreas Ziegler <[email protected]>
Sent: Thursday, February 23, 2023 2:49 PM
To: Alberto Fahrenkrog <[email protected]>
Cc: [email protected] <[email protected]>
Subject: Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]

Hi Alberto,

Quoted 39 lines · Alberto Fahrenkrog

Update,

if I change $(eval $(python-koala)) to $(eval $(python-package)) I still get the same error. I assume that might have been one mistake.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 12:42 PM
To: [email protected] <[email protected]>
Subject: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification> Hello all,

I'm trying to build a very simple custom python package following the instructions on the manual, yet I must be doing something very wrong as I get this result:

$ make python-koala
make[1]: *** No rule to make target 'python-koala'.  Stop.
make: *** [Makefile:23: _all] Error 2

I create my out of tree build with:
make -C ~/opt/buildroot-2021.02/ BR2_EXTERNAL=~/Projects/br_build O=~/Projects/br_build BR2_DL_DIR=~/Projects/br_build/downloads br_build_defconfig

Quoted 4 lines

On my "br_build" folder I have a Config.in file:
menu "Python-Libs"
source "~/Projects/br_build/package/python-koala/Config.in"
endmenu

Similar to the include file for configs, you also need an external.mk file for the project make files, with this content:

   include $(sort $(wildcard ~/Projects/br_build/package/*/*.mk))

Otherwise your .mk files will not be picked up.

Quoted 1 line

In "br_build/packages/python-koala/Config.in"

The package directory is usually named 'package', not sure if this is relevant (but Config.in /external.mk have to match it).

Quoted 25 lines

config BR2_PACKAGE_PYTHON_KOALA
??????bool "python-koala"
depends on BR2_PACKAGE_PYTHON3
??????help
?????? Python implementation of Koala Library

In "br_build/packages/python-koala/python-koala.mk"
################################################################################
#

# python-koala
#
################################################################################

PYTHON_KOALA_VERSION = 1.3.3 PYTHON_KOALA_SOURCE = $(PYTHON_KOALA_VERSION).tar.gz PYTHON_KOALA_SITE =
https://mywebsite.com.au/ExternalCode/koala/archive/
PYTHON_KOALA_SETUP_TYPE = setuptools

$(eval $(python-koala))

If I run "make menuconfig" I can select or deselect the package, and it's selected per default on the br_build_defconfig (and in .config):
BR2_PACKAGE_PYTHON_KOALA=y

Quoted 7 lines

But if I try to run "make python-koala" I get the "no target" error. I'll still have a read and see what I might be doing wrong, but I'm very confused. Any ideas are very welcome.

Cheers,

Alberto

<cut>

Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#5 lore raw
Quoted 9 lines · Alberto Fahrenkrog

Hi all, I'm slowly getting ahead with this, and I still have a few more questions...

I'm trying to get a tar.gz file from a git repo, which needs authentication. The command that works manually is:
/wget https://outwebsite.com/koala/archive/release1.2.3.tar.gz --header 'Authorization: token MY_TOKEN'/ /
/
And the .mk file is configured as:
PYTHON_KOALA_SITE_METHOD = wget
PYTHON_KOALA_DL_OPTS = --header 'Authorization: token MY_TOKEN'

Since commit 3f2bdd0701de4f2bca7e6d96f96972e7bcabdd93 (by Yann, in Cc), it is
necessary to twice-quote the arguments to wget (and wget only). So

PYTHON_KOALA_DL_OPTS = --header "'Authorization: token MY_TOKEN'"

Yann, I honestly don't understand why this eval is needed, instead of simply
passing BR2_HG unquoted... But I didn't look too deeply into it.

Regards,
Arnout

Quoted 170 lines

PYTHON_KOALA_SITE = https://outwebsite.com/koala/archive/ <https://outwebsite.com/koala/archive/>

The .mk file is being read correctly, but I can't figure out how to use DL_OPTS. The manual says DL_OPTS is a space separated list, but i see wget tries to use "token" or "MY_TOKEN" as the address. I tried a few different combinations of inverted commas, but none worked.

Thanks again,

Alberto
/
/
/
/
Alberto​ Fahrenkrog

Senior Embedded Engineer

Orica ‑ Perth Technology Centre

p: +61 (0) 8 6365 4056

e: *[email protected]* <mailto:[email protected]>

--------------------------------------------------------------------------------
*From:* Alberto Fahrenkrog <[email protected]>
*Sent:* Thursday, February 23, 2023 3:13 PM
*To:* [email protected] <[email protected]>
*Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build
Ok, I see now that external.mk is explained in chapter 9. I jumped straight to chapter 18 and missed external.mk completely. And for some reason I never found external.mk on my google searches.

Thanks all for your help!

Cheers,

Alberto
--------------------------------------------------------------------------------
*From:* buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]> *Sent:* Thursday, February 23, 2023 3:09 PM
*To:* [email protected] <[email protected]>
*Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important <https://aka.ms/LearnAboutSenderIdentification>

Hi Andreas,

Thank you so much! That did it! Where in the manual is external.mk explained? I missed it for sure...

Cheers,

Alberto
Alberto​ Fahrenkrog

Senior Embedded Engineer

Orica ‑ Perth Technology Centre

p: +61 (0) 8 6365 4056

e: *[email protected]* <mailto:[email protected]>

--------------------------------------------------------------------------------
*From:* buildroot <[email protected]> on behalf of Andreas Ziegler <[email protected]>
*Sent:* Thursday, February 23, 2023 2:49 PM
*To:* Alberto Fahrenkrog <[email protected]>
*Cc:* [email protected] <[email protected]>
*Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification <https://aka.ms/LearnAboutSenderIdentification> ]

Hi Alberto,

Quoted 21 lines · Alberto Fahrenkrog

Update,

if I change  $(eval $(python-koala)) to $(eval $(python-package)) I still get the same error. I assume that might have been one mistake.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 12:42 PM
To: [email protected] <[email protected]>
Subject: [Buildroot] [Help] Struggling to build external python package on out of tree build

Quoted 3 lines

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification

<https://aka.ms/LearnAboutSenderIdentification>>

Quoted 15 lines

Hello all,

I'm trying to build a very simple custom python package following the instructions on the manual, yet I must be doing something very wrong as I get this result:

$ make python-koala
make[1]: *** No rule to make target 'python-koala'.  Stop.
make: *** [Makefile:23: _all] Error 2

I create my out of tree build with:
make -C ~/opt/buildroot-2021.02/ BR2_EXTERNAL=~/Projects/br_build O=~/Projects/br_build BR2_DL_DIR=~/Projects/br_build/downloads br_build_defconfig

Quoted 4 lines

On my "br_build" folder I have a Config.in file:
menu "Python-Libs"
     source "~/Projects/br_build/package/python-koala/Config.in" endmenu

Similar to the include file for configs, you also need an external.mk file for the project make files, with this content:

   include $(sort $(wildcard ~/Projects/br_build/package/*/*.mk))

Otherwise your .mk files will not be picked up.

Quoted 1 line

In "br_build/packages/python-koala/Config.in"

The package directory is usually named 'package', not sure if this is relevant (but Config.in /external.mk have to match it).

Quoted 9 lines

config BR2_PACKAGE_PYTHON_KOALA
??????bool "python-koala"
   depends on BR2_PACKAGE_PYTHON3
??????help
??????  Python implementation of Koala Library

In "br_build/packages/python-koala/python-koala.mk"
################################################################################
#

Quoted 8 lines
# python-koala
#
################################################################################

PYTHON_KOALA_VERSION = 1.3.3 PYTHON_KOALA_SOURCE = $(PYTHON_KOALA_VERSION).tar.gz PYTHON_KOALA_SITE =
https://mywebsite.com.au/ExternalCode/koala/archive/

<https://mywebsite.com.au/ExternalCode/koala/archive/>

Quoted 8 lines

PYTHON_KOALA_SETUP_TYPE = setuptools

$(eval $(python-koala))

If I run "make menuconfig" I can select or deselect the package, and it's selected per default on the br_build_defconfig (and in .config):
BR2_PACKAGE_PYTHON_KOALA=y

Quoted 7 lines

But if I try to run "make python-koala" I get the "no target" error. I'll still have a read and see what I might be doing wrong, but I'm very confused. Any ideas are very welcome.

Cheers,

Alberto

<cut>

Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot <https://lists.buildroot.org/mailman/listinfo/buildroot>

Quoted 4 lines

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#6 lore raw

Arnout, All,

On 2023-02-23 20:39 +0100, Arnout Vandecappelle spake thusly:

Quoted 13 lines · Alberto Fahrenkrog
Quoted 11 lines

Hi all, I'm slowly getting ahead with this, and I still have a few more questions...

I'm trying to get a tar.gz file from a git repo, which needs authentication. The command that works manually is:
/wget https://outwebsite.com/koala/archive/release1.2.3.tar.gz --header 'Authorization: token MY_TOKEN'/
/
/
And the .mk file is configured as:
PYTHON_KOALA_SITE_METHOD = wget
PYTHON_KOALA_DL_OPTS = --header 'Authorization: token MY_TOKEN'

Quoted 2 lines

Since commit 3f2bdd0701de4f2bca7e6d96f96972e7bcabdd93 (by Yann, in Cc), it
is necessary to twice-quote the arguments to wget (and wget only). So

Oh dang, a commit from 7 years ago... ;-)

Quoted 4 lines

PYTHON_KOALA_DL_OPTS = --header "'Authorization: token MY_TOKEN'"

Yann, I honestly don't understand why this eval is needed, instead of
simply passing BR2_HG unquoted... But I didn't look too deeply into it.

That's because that does not work?

    $ cat ess
    #!/usr/bin/env bash
    bar() {
        for i in "${@}"; do
            printf '__%s__\n' "${i}"
        done
    }
    MY_CMD="bar '1 2 3' a b 'C D'"
    ${MY_CMD} START "${@}" END
    echo
    MY_CMD="./foo '1 2 3' a b 'C D'"
    ${MY_CMD} START "${@}" END
    $ cat foo
    #!/usr/bin/env bash
    for i in "${@}"; do
        printf '>>%s<<\n' "${i}"
    done
    $ ./ess wee woo "woot woot"
    __'1__
    __2__
    __3'__
    __a__
    __b__
    __'C__
    __D'__
    __START__
    __wee__
    __woo__
    __woot woot__
    __END__
Quoted 4 lines
Quoted 4 lines

'1<<
2<<
3'<<
a<<

Quoted 8 lines
Quoted 8 lines

b<<
'C<<
D'<<
START<<
wee<<
woo<<
woot woot<<
END<<

So, if the command for a downloader, as provided in the .config, contains quoted material, the quotes would be part of the word.

Regards,
Yann E. MORIN.

Quoted 197 lines

Regards,
Arnout

Quoted 193 lines

PYTHON_KOALA_SITE = https://outwebsite.com/koala/archive/
<https://outwebsite.com/koala/archive/>

The .mk file is being read correctly, but I can't figure out how to use DL_OPTS. The manual says DL_OPTS is a space separated list, but i see wget tries to use "token" or "MY_TOKEN" as the address. I tried a few different combinations of inverted commas, but none worked.

Thanks again,

Alberto
/
/
/
/
Alberto​ Fahrenkrog

Senior Embedded Engineer

Orica ‑ Perth Technology Centre

p: +61 (0) 8 6365 4056

e: *[email protected]* <mailto:[email protected]>

--------------------------------------------------------------------------------
*From:* Alberto Fahrenkrog <[email protected]> *Sent:* Thursday, February 23, 2023 3:13 PM
*To:* [email protected] <[email protected]> *Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build
Ok, I see now that external.mk is explained in chapter 9. I jumped straight to chapter 18 and missed external.mk completely. And for some reason I never found external.mk on my google searches.

Thanks all for your help!

Cheers,

Alberto
--------------------------------------------------------------------------------
*From:* buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]> *Sent:* Thursday, February 23, 2023 3:09 PM
*To:* [email protected] <[email protected]> *Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important
<https://aka.ms/LearnAboutSenderIdentification>

Hi Andreas,

Thank you so much! That did it! Where in the manual is external.mk explained? I missed it for sure...

Cheers,

Alberto
Alberto​ Fahrenkrog

Senior Embedded Engineer

Orica ‑ Perth Technology Centre

p: +61 (0) 8 6365 4056

e: *[email protected]* <mailto:[email protected]>

--------------------------------------------------------------------------------
*From:* buildroot <[email protected]> on behalf of Andreas Ziegler <[email protected]>
*Sent:* Thursday, February 23, 2023 2:49 PM
*To:* Alberto Fahrenkrog <[email protected]> *Cc:* [email protected] <[email protected]> *Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification
<https://aka.ms/LearnAboutSenderIdentification> ]

Hi Alberto,

Quoted 21 lines · Alberto Fahrenkrog

Update,

if I change  $(eval $(python-koala)) to $(eval $(python-package)) I still get the same error. I assume that might have been one mistake.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 12:42 PM
To: [email protected] <[email protected]>
Subject: [Buildroot] [Help] Struggling to build external python package on out of tree build

Quoted 3 lines

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification

<https://aka.ms/LearnAboutSenderIdentification>>

Quoted 15 lines

Hello all,

I'm trying to build a very simple custom python package following the instructions on the manual, yet I must be doing something very wrong as I get this result:

$ make python-koala
make[1]: *** No rule to make target 'python-koala'.  Stop.
make: *** [Makefile:23: _all] Error 2

I create my out of tree build with:
make -C ~/opt/buildroot-2021.02/ BR2_EXTERNAL=~/Projects/br_build O=~/Projects/br_build BR2_DL_DIR=~/Projects/br_build/downloads br_build_defconfig

Quoted 4 lines

On my "br_build" folder I have a Config.in file:
menu "Python-Libs"
     source "~/Projects/br_build/package/python-koala/Config.in" endmenu

Similar to the include file for configs, you also need an external.mk file for the project make files, with this content:

   include $(sort $(wildcard ~/Projects/br_build/package/*/*.mk))

Otherwise your .mk files will not be picked up.

Quoted 1 line

In "br_build/packages/python-koala/Config.in"

The package directory is usually named 'package', not sure if this is relevant (but Config.in /external.mk have to match it).

Quoted 9 lines

config BR2_PACKAGE_PYTHON_KOALA
??????bool "python-koala"
   depends on BR2_PACKAGE_PYTHON3
??????help
??????  Python implementation of Koala Library

In "br_build/packages/python-koala/python-koala.mk"
################################################################################
#

Quoted 8 lines
# python-koala
#
################################################################################

PYTHON_KOALA_VERSION = 1.3.3 PYTHON_KOALA_SOURCE = $(PYTHON_KOALA_VERSION).tar.gz PYTHON_KOALA_SITE =
https://mywebsite.com.au/ExternalCode/koala/archive/

<https://mywebsite.com.au/ExternalCode/koala/archive/>

Quoted 8 lines

PYTHON_KOALA_SETUP_TYPE = setuptools

$(eval $(python-koala))

If I run "make menuconfig" I can select or deselect the package, and it's selected per default on the br_build_defconfig (and in .config):
BR2_PACKAGE_PYTHON_KOALA=y

Quoted 7 lines

But if I try to run "make python-koala" I get the "no target" error. I'll still have a read and see what I might be doing wrong, but I'm very confused. Any ideas are very welcome.

Cheers,

Alberto

<cut>

Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
<https://lists.buildroot.org/mailman/listinfo/buildroot>

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Signature · 10 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#7 lore raw

Yann, Arnout, thanks a lot. I just tried this and it worked beautifully! I really appreciate your support.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: Yann E. MORIN <[email protected]>
Sent: Friday, February 24, 2023 3:54 AM
To: Arnout Vandecappelle <[email protected]>
Cc: Alberto Fahrenkrog <[email protected]>; [email protected] <[email protected]>
Subject: Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

Arnout, All,

On 2023-02-23 20:39 +0100, Arnout Vandecappelle spake thusly:

Quoted 13 lines · Alberto Fahrenkrog
Quoted 11 lines

Hi all, I'm slowly getting ahead with this, and I still have a few more questions...

I'm trying to get a tar.gz file from a git repo, which needs authentication. The command that works manually is:
/wget https://outwebsite.com/koala/archive/release1.2.3.tar.gz --header 'Authorization: token MY_TOKEN'/
/
/
And the .mk file is configured as:
PYTHON_KOALA_SITE_METHOD = wget
PYTHON_KOALA_DL_OPTS = --header 'Authorization: token MY_TOKEN'

Quoted 2 lines

Since commit 3f2bdd0701de4f2bca7e6d96f96972e7bcabdd93 (by Yann, in Cc), it
is necessary to twice-quote the arguments to wget (and wget only). So

Oh dang, a commit from 7 years ago... ;-)

Quoted 4 lines

PYTHON_KOALA_DL_OPTS = --header "'Authorization: token MY_TOKEN'"

Yann, I honestly don't understand why this eval is needed, instead of
simply passing BR2_HG unquoted... But I didn't look too deeply into it.

That's because that does not work?

    $ cat ess
    #!/usr/bin/env bash
    bar() {
        for i in "${@}"; do
            printf '__%s__\n' "${i}"
        done
    }
    MY_CMD="bar '1 2 3' a b 'C D'"
    ${MY_CMD} START "${@}" END
    echo
    MY_CMD="./foo '1 2 3' a b 'C D'"
    ${MY_CMD} START "${@}" END
    $ cat foo
    #!/usr/bin/env bash
    for i in "${@}"; do
        printf '>>%s<<\n' "${i}"
    done
    $ ./ess wee woo "woot woot"
    __'1__
    __2__
    __3'__
    __a__
    __b__
    __'C__
    __D'__
    __START__
    __wee__
    __woo__
    __woot woot__
    __END__
Quoted 4 lines
Quoted 4 lines

'1<<
2<<
3'<<
a<<

Quoted 8 lines
Quoted 8 lines

b<<
'C<<
D'<<
START<<
wee<<
woo<<
woot woot<<
END<<

So, if the command for a downloader, as provided in the .config, contains quoted material, the quotes would be part of the word.

Regards,
Yann E. MORIN.

Quoted 197 lines

Regards,
Arnout

Quoted 193 lines

PYTHON_KOALA_SITE = https://outwebsite.com/koala/archive/
<https://outwebsite.com/koala/archive/>

The .mk file is being read correctly, but I can't figure out how to use DL_OPTS. The manual says DL_OPTS is a space separated list, but i see wget tries to use "token" or "MY_TOKEN" as the address. I tried a few different combinations of inverted commas, but none worked.

Thanks again,

Alberto
/
/
/
/
Alberto​ Fahrenkrog

Senior Embedded Engineer

Orica ‑ Perth Technology Centre

p: +61 (0) 8 6365 4056

e: *[email protected]* <mailto:[email protected]>

--------------------------------------------------------------------------------
*From:* Alberto Fahrenkrog <[email protected]> *Sent:* Thursday, February 23, 2023 3:13 PM
*To:* [email protected] <[email protected]> *Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build
Ok, I see now that external.mk is explained in chapter 9. I jumped straight to chapter 18 and missed external.mk completely. And for some reason I never found external.mk on my google searches.

Thanks all for your help!

Cheers,

Alberto
--------------------------------------------------------------------------------
*From:* buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]> *Sent:* Thursday, February 23, 2023 3:09 PM
*To:* [email protected] <[email protected]> *Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build

You don't often get email from [email protected]. Learn why this is important
<https://aka.ms/LearnAboutSenderIdentification>

Hi Andreas,

Thank you so much! That did it! Where in the manual is external.mk explained? I missed it for sure...

Cheers,

Alberto
Alberto​ Fahrenkrog

Senior Embedded Engineer

Orica ‑ Perth Technology Centre

p: +61 (0) 8 6365 4056

e: *[email protected]* <mailto:[email protected]>

--------------------------------------------------------------------------------
*From:* buildroot <[email protected]> on behalf of Andreas Ziegler <[email protected]>
*Sent:* Thursday, February 23, 2023 2:49 PM
*To:* Alberto Fahrenkrog <[email protected]> *Cc:* [email protected] <[email protected]> *Subject:* Re: [Buildroot] [Help] Struggling to build external python package on out of tree build
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification
<https://aka.ms/LearnAboutSenderIdentification> ]

Hi Alberto,

Quoted 21 lines · Alberto Fahrenkrog

Update,

if I change $(eval $(python-koala)) to $(eval $(python-package)) I still get the same error. I assume that might have been one mistake.

Cheers,

Alberto

Alberto Fahrenkrog Senior Embedded Engineer
Orica - Perth Technology Centre
p: +61 (0) 8 6365 4056
e: [email protected]
________________________________
From: buildroot <[email protected]> on behalf of Alberto Fahrenkrog <[email protected]>
Sent: Thursday, February 23, 2023 12:42 PM
To: [email protected] <[email protected]>
Subject: [Buildroot] [Help] Struggling to build external python package on out of tree build

Quoted 3 lines

You don't often get email from [email protected]. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification

<https://aka.ms/LearnAboutSenderIdentification>>

Quoted 15 lines

Hello all,

I'm trying to build a very simple custom python package following the instructions on the manual, yet I must be doing something very wrong as I get this result:

$ make python-koala
make[1]: *** No rule to make target 'python-koala'.  Stop.
make: *** [Makefile:23: _all] Error 2

I create my out of tree build with:
make -C ~/opt/buildroot-2021.02/ BR2_EXTERNAL=~/Projects/br_build O=~/Projects/br_build BR2_DL_DIR=~/Projects/br_build/downloads br_build_defconfig

Quoted 4 lines

On my "br_build" folder I have a Config.in file:
menu "Python-Libs"
source "~/Projects/br_build/package/python-koala/Config.in"
endmenu

Similar to the include file for configs, you also need an external.mk file for the project make files, with this content:

   include $(sort $(wildcard ~/Projects/br_build/package/*/*.mk))

Otherwise your .mk files will not be picked up.

Quoted 1 line

In "br_build/packages/python-koala/Config.in"

The package directory is usually named 'package', not sure if this is relevant (but Config.in /external.mk have to match it).

Quoted 9 lines

config BR2_PACKAGE_PYTHON_KOALA
??????bool "python-koala"
depends on BR2_PACKAGE_PYTHON3
??????help
?????? Python implementation of Koala Library

In "br_build/packages/python-koala/python-koala.mk"
################################################################################
#

Quoted 8 lines
# python-koala
#
################################################################################

PYTHON_KOALA_VERSION = 1.3.3 PYTHON_KOALA_SOURCE = $(PYTHON_KOALA_VERSION).tar.gz PYTHON_KOALA_SITE =
https://mywebsite.com.au/ExternalCode/koala/archive/

<https://mywebsite.com.au/ExternalCode/koala/archive/>

Quoted 8 lines

PYTHON_KOALA_SETUP_TYPE = setuptools

$(eval $(python-koala))

If I run "make menuconfig" I can select or deselect the package, and it's selected per default on the br_build_defconfig (and in .config):
BR2_PACKAGE_PYTHON_KOALA=y

Quoted 7 lines

But if I try to run "make python-koala" I get the "no target" error. I'll still have a read and see what I might be doing wrong, but I'm very confused. Any ideas are very welcome.

Cheers,

Alberto

<cut>

Kind regards,
Andreas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
<https://lists.buildroot.org/mailman/listinfo/buildroot>

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

--
.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot