s390x: Add tests for execute-type instructions
PATCH v2 1/1 s390x: Add tests for execute-type instructions
Test the instruction address used by targets of an execute instruction. When the target instruction calculates a relative address, the result is relative to the target instruction, not the execute instruction.
---
v1 -> v2:
* add test to unittests.cfg and .gitlab-ci.yml
* pick up R-b (thanks Nico)
TCG does the address calculation relative to the execute instruction.
s390x/Makefile | 1 + s390x/ex.c | 92 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ .gitlab-ci.yml | 1 + 4 files changed, 97 insertions(+) create mode 100644 s390x/ex.c
s390x/Makefile +1 -0
@@ -39,6 +39,7 @@ tests += $(TEST_DIR)/panic-loop-extint.elf tests += $(TEST_DIR)/panic-loop-pgm.elf tests += $(TEST_DIR)/migration-sck.elf tests += $(TEST_DIR)/exittime.elf +tests += $(TEST_DIR)/ex.elf pv-tests += $(TEST_DIR)/pv-diags.elf
s390x/ex.c new file +92 -0
92 lines not on this page · raw message
s390x/unittests.cfg +3 -0
@@ -215,3 +215,6 @@ file = migration-skey.elf smp = 2 groups = migration extra_params = -append '--parallel' + +[execute] +file = ex.elf
.gitlab-ci.yml +1 -0
@@ -275,6 +275,7 @@ s390x-kvm: - ACCEL=kvm ./run_tests.sh selftest-setup intercept emulator sieve sthyi diag10 diag308 pfmf cmm vector gs iep cpumodel diag288 stsi sclp-1g sclp-3g css skrf sie + execute | tee results.txt - grep -q PASS results.txt && ! grep -q FAIL results.txt only:
base-commit: e3c5c3ef2524c58023073c0fadde2e8ae3c04ec6
Signature · 1 line
2.36.1
Quoted 3 lines · Nina Schoetterl-Glausch
Test the instruction address used by targets of an execute instruction. When the target instruction calculates a relative address, the result is relative to the target instruction, not the execute instruction.
For instructions like execute where the details matter it's a great idea to have a lot of comments maybe even loose references to the PoP so people can read up on the issue more easily.
Quoted 6 lines
Signed-off-by Nina Schoetterl-Glausch <[email protected]>Reviewed-by Nico Boehr <[email protected]>---
Quoted 6 lines
v1 -> v2:
* add test to unittests.cfg and .gitlab-ci.yml
* pick up R-b (thanks Nico)TCG does the address calculation relative to the execute instruction.
Always?
I.e. what are you telling me here?
Quoted 27 lines
s390x/Makefile | 1 + s390x/ex.c | 92 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ .gitlab-ci.yml | 1 + 4 files changed, 97 insertions(+)create mode 100644
s390x/ex.cs390x/Makefile +1
-0@@ -39,6 +39,7 @@ tests += $(TEST_DIR)/panic-loop-extint.elf tests += $(TEST_DIR)/panic-loop-pgm.elf tests += $(TEST_DIR)/migration-sck.elf tests += $(TEST_DIR)/exittime.elf +tests += $(TEST_DIR)/ex.elf pv-tests += $(TEST_DIR)/pv-diags.elfs390x/ex.c new file +0
-0
s390x/ex.c line 9
Quoted 9 lines
s390x/ex.c new file +9
-0@@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright IBM Corp. 2023 +* +* Test EXECUTE (RELATIVE LONG). +*/ + +#include <libcflat.h> +
Take my words with some salt, I never had a close look at the branch instructions other than brc.
This is "branch and save" and the "r" in "basr" says that it's the RR variant. It's not relative the way that "bras" is, right?
Hence ret_addr and after_ex both point to 1f.
I'd like to have a comment here that states that this is not a relative branch at all. The r specifies the instruction format.
Quoted 14 lines
s390x/ex.c new file +14
-0+static void test_basr (void ) +{ +uint64_t ret_addr, after_ex; + +report_prefix_push ("BASR" ); + asmvolatile (".pushsection .rodata\n" +"0: basr %[ret_addr],0\n" +" .popsection\n" + +" larl %[after_ex],1f\n" +" exrl 0,0b\n" +"1:\n" + : [ret_addr]"=d" (ret_addr), + [after_ex] "=d" (after_ex)
s390x/ex.c line 33
Quoted 10 lines
s390x/ex.c new file +10
-0+ ); + +report (ret_addr == after_ex,"return address after EX" ); +report_prefix_pop (); +} + +/* +* According to PoP (Branch-Address Generation), the address is relative to +* BRAS when it is the target of an execute-type instruction. +*/
Is there any merit in testing the other br* instructions as well or are they running through the same TCG function?
Quoted 22 lines
s390x/ex.c new file +22
-0+static void test_bras (void ) +{ +uint64_t after_target, ret_addr, after_ex, branch_addr; + +report_prefix_push ("BRAS" ); + asm volatile ( ".pushsection .text.ex_bras, \"x\"\n" + "0: bras %[ret_addr],1f\n" + " nopr %%r7\n" + "1: larl %[branch_addr],0\n" + " j 4f\n" + " .popsection\n" + + " larl %[after_target],1b\n" + " larl %[after_ex],3f\n" + "2: exrl 0,0b\n" + "3: larl %[branch_addr],0\n" + "4:\n" + + " .if (1b - 0b) != (3b - 2b)\n" + " .error \"right and wrong target must have same offset\"\n" + " .endif\n" + : [after_target] "=d" (after_target),
s390x/ex.c line 65
Quoted 10 lines
s390x/ex.c new file +10
-0+ [ret_addr] "=d" (ret_addr), + [after_ex] "=d" (after_ex), + [branch_addr] "=d" (branch_addr) + ); + +report (after_target == branch_addr,"address calculated relative to BRAS" ); +report (ret_addr == after_ex,"return address after EX" ); +report_prefix_pop (); +} +
Add:
/* larl follows the address generation of relative branch instructions */
Quoted 11 lines
s390x/ex.c new file +11
-0+static void test_larl (void ) +{ +uint64_t target, addr; + +report_prefix_push ("LARL" ); + asmvolatile (".pushsection .rodata\n" +"0: larl %[addr],0\n" +" .popsection\n" + +" larl %[target],0b\n" + " exrl 0,0b\n"
s390x/ex.c line 86
Quoted 10 lines
s390x/ex.c new file +10
-0+ : [target] "=d" (target), + [addr] "=d" (addr) + ); + +report (target == addr,"address calculated relative to LARL" ); +report_prefix_pop (); +} + +int main (int argc,char **argv) +{
We're missing push and pop around the test function block so that we know which file generated the output.
report_prefix_push("execute");
s390x/ex.c line 89
Quoted 3 lines
s390x/ex.c new file +3
-0+test_basr (); +test_bras (); +test_larl ();
report_prefix_pop();
Quoted 27 lines
s390x/ex.c new file +2
-0+return report_summary (); +}s390x/unittests.cfg +3
-0@@ -215,3 +215,6 @@ file = migration-skey.elf smp = 2 groups = migration extra_params = -append '--parallel' + +[execute] +file = ex.elf.gitlab-ci.yml +1
-0@@ -275,6 +275,7 @@ s390x-kvm: - ACCEL=kvm ./run_tests.sh selftest-setup intercept emulator sieve sthyi diag10 diag308 pfmf cmm vector gs iep cpumodel diag288 stsi sclp-1g sclp-3g css skrf sie + execute | tee results.txt - grep -q PASS results.txt && ! grep -q FAIL results.txt only:base-commit:
e3c5c3ef2524c58023073c0fadde2e8ae3c04ec6
Quoted 16 lines · Janosch Frank
Quoted 3 lines · Nina Schoetterl-Glausch
Test the instruction address used by targets of an execute instruction. When the target instruction calculates a relative address, the result is relative to the target instruction, not the execute instruction.
For instructions like execute where the details matter it's a great idea to have a lot of comments maybe even loose references to the PoP so people can read up on the issue more easily.
Quoted 6 lines
Signed-off-by Nina Schoetterl-Glausch <[email protected]>Reviewed-by Nico Boehr <[email protected]>---
Quoted 8 lines
Quoted 6 lines
v1 -> v2:
* add test to unittests.cfg and .gitlab-ci.yml
* pick up R-b (thanks Nico)TCG does the address calculation relative to the execute instruction.
Always?
AFAIK yes. Everything that has an operand that is relative to the instruction given by the immediate in the instruction and goes through in2_ri2 in TCG will have this problem, because in2_ri2 does the calculation relative to pc_next which is the address of the EX(RL).
That should make fixing it easier tho.
Quoted 42 lines
I.e. what are you telling me here?
Quoted 27 lines
s390x/Makefile | 1 + s390x/ex.c | 92 +++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg | 3 ++ .gitlab-ci.yml | 1 + 4 files changed, 97 insertions(+)create mode 100644
s390x/ex.cs390x/Makefile +1
-0@@ -39,6 +39,7 @@ tests += $(TEST_DIR)/panic-loop-extint.elf tests += $(TEST_DIR)/panic-loop-pgm.elf tests += $(TEST_DIR)/migration-sck.elf tests += $(TEST_DIR)/exittime.elf +tests += $(TEST_DIR)/ex.elf pv-tests += $(TEST_DIR)/pv-diags.elfs390x/ex.c new file +0
-0s390x/ex.c line 9
Quoted 9 lines
s390x/ex.c new file +9
-0@@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright IBM Corp. 2023 +* +* Test EXECUTE (RELATIVE LONG). +*/ + +#include <libcflat.h> +Take my words with some salt, I never had a close look at the branch instructions other than brc.
Quoted 2 lines
This is "branch and save" and the "r" in "basr" says that it's the RR variant. It's not relative the way that "bras" is, right?
Yes, it isn't. It's so there are tests for different address generations that are a function of the current instruction address.
Quoted 5 lines
Hence
ret_addrandafter_exboth point to 1f.I'd like to have a comment here that states that this is not a relative branch at all. The r specifies the instruction format.
Yeah, will do.
Quoted 20 lines
Quoted 20 lines
s390x/ex.c new file +19
-0+static void test_basr (void ) +{ +uint64_t ret_addr, after_ex; + +report_prefix_push ("BASR" ); + asmvolatile (".pushsection .rodata\n" +"0: basr %[ret_addr],0\n" +" .popsection\n" + +" larl %[after_ex],1f\n" +" exrl 0,0b\n" +"1:\n" + : [ret_addr]"=d" (ret_addr), + [after_ex]"=d" (after_ex) + ); + +report (ret_addr == after_ex,"return address after EX" ); +report_prefix_pop (); +}
Quoted 8 lines
s390x/ex.c line 33
Quoted 5 lines
s390x/ex.c new file +5
-0+ +/* +* According to PoP (Branch-Address Generation), the address is relative to +* BRAS when it is the target of an execute-type instruction. +*/ Is there any merit in testing the other br* instructions as well or are they running through the same TCG function?
Well, there is in the sense that it's better not to make assumptions about the implementation, but given the above it shouldn't make a difference in practice, unless my understanding is wrong or I'm missing some special case.
Quoted 28 lines
Quoted 28 lines
s390x/ex.c new file +27
-0+static void test_bras (void ) +{ +uint64_t after_target, ret_addr, after_ex, branch_addr; + +report_prefix_push ("BRAS" ); + asmvolatile (".pushsection .text.ex_bras, \"x\"\n" +"0: bras %[ret_addr],1f\n" +" nopr %%r7\n" +"1: larl %[branch_addr],0\n" +" j 4f\n" +" .popsection\n" + +" larl %[after_target],1b\n" +" larl %[after_ex],3f\n" +"2: exrl 0,0b\n" +"3: larl %[branch_addr],0\n" +"4:\n" + +" .if (1b - 0b) != (3b - 2b)\n" +" .error \"right and wrong target must have same offset\"\n" +" .endif\n" + : [after_target]"=d" (after_target), + [ret_addr]"=d" (ret_addr), + [after_ex]"=d" (after_ex), + [branch_addr]"=d" (branch_addr) + ); +
Quoted 8 lines
s390x/ex.c line 65
Quoted 5 lines
s390x/ex.c new file +5
-0+report (after_target == branch_addr,"address calculated relative to BRAS" ); +report (ret_addr == after_ex,"return address after EX" ); +report_prefix_pop (); +} +Add:
/* larl follows the address generation of relative branch instructions */
Yes, will also add another test for a relative immediate instruction that doesn't explicitly state the same in the description.
Quoted 61 lines
Quoted 11 lines
s390x/ex.c new file +11
-0+static void test_larl (void ) +{ +uint64_t target, addr; + +report_prefix_push ("LARL" ); + asmvolatile (".pushsection .rodata\n" +"0: larl %[addr],0\n" +" .popsection\n" + +" larl %[target],0b\n" + " exrl 0,0b\n"s390x/ex.c line 86
Quoted 10 lines
s390x/ex.c new file +10
-0+ : [target] "=d" (target), + [addr] "=d" (addr) + ); + +report (target == addr,"address calculated relative to LARL" ); +report_prefix_pop (); +} + +int main (int argc,char **argv) +{We're missing push and pop around the test function block so that we know which file generated the output.
report_prefix_push("execute");s390x/ex.c line 89
Quoted 3 lines
s390x/ex.c new file +3
-0+test_basr (); +test_bras (); +test_larl ();
report_prefix_pop();Quoted 27 lines
s390x/ex.c new file +2
-0+return report_summary (); +}s390x/unittests.cfg +3
-0@@ -215,3 +215,6 @@ file = migration-skey.elf smp = 2 groups = migration extra_params = -append '--parallel' + +[execute] +file = ex.elf.gitlab-ci.yml +1
-0@@ -275,6 +275,7 @@ s390x-kvm: - ACCEL=kvm ./run_tests.sh selftest-setup intercept emulator sieve sthyi diag10 diag308 pfmf cmm vector gs iep cpumodel diag288 stsi sclp-1g sclp-3g css skrf sie + execute | tee results.txt - grep -q PASS results.txt && ! grep -q FAIL results.txt only:base-commit:
e3c5c3ef2524c58023073c0fadde2e8ae3c04ec6