Skip to contentSkip to conversation

audio/pwaudio.c: Add Pipewire audio backend for QEMU

PATCH Superseded Dorinda Bassey 2 participants 5 messages Feb 27, 2023 – Mar 8, 2023 Arm/Amlogic Meson SoC support

v5 of 12 Superseded Latest is v12 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 audio/pwaudio.c: Add Pipewire audio backend for QEMU

This commit adds a new audiodev backend to allow QEMU to use Pipewire as both an audio sink and source. This backend is available on most systems

Add Pipewire entry points for QEMU Pipewire audio backend Add wrappers for QEMU Pipewire audio backend in qpw_pcm_ops() qpw_write function returns the current state of the stream to pwaudio and Writes some data to the server for playback streams using pipewire spa_ringbuffer implementation.
qpw_read function returns the current state of the stream to pwaudio and reads some data from the server for capture streams using pipewire spa_ringbuffer implementation. These functions qpw_write and qpw_read are called during playback and capture.
Added some functions that convert pw audio formats to QEMU audio format and vice versa which would be needed in the pipewire audio sink and source functions qpw_init_in() & qpw_init_out().
These methods that implement playback and recording will create streams for playback and capture that will start processing and will result in the on_process callbacks to be called.
Built a connection to the Pipewire sound system server in the qpw_audio_init() method.

---
v5:
silence output to the console, use pw debug log
use SPDX identifier
fix typo
change version release

 audio/audio.c                 |   3 +
 audio/audio_template.h        |   4 +
 audio/meson.build             |   1 +
 audio/pwaudio.c               | 811 ++++++++++++++++++++++++++++++++++
 meson.build                   |   8 +
 meson_options.txt             |   4 +-
 qapi/audio.json               |  45 ++
 qemu-options.hx               |  17 +
 scripts/meson-buildoptions.sh |   8 +-
 9 files changed, 898 insertions(+), 3 deletions(-)
 create mode 100644 audio/pwaudio.c
audio/audio.c +3 -0
index 4290309d18..aa55e41ad8 100644
@@ -2069,6 +2069,9 @@ void audio_create_pdos(Audiodev *dev)
 #ifdef CONFIG_AUDIO_PA
         CASE(PA, pa, Pa);
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+        CASE(PIPEWIRE, pipewire, Pipewire);
+#endif
 #ifdef CONFIG_AUDIO_SDL
         CASE(SDL, sdl, Sdl);
 #endif
audio/audio_template.h +4 -0
index 42b4712acb..0f02afb921 100644
@@ -355,6 +355,10 @@ AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev)
     case AUDIODEV_DRIVER_PA:
         return qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.TYPE);
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+    case AUDIODEV_DRIVER_PIPEWIRE:
+        return qapi_AudiodevPipewirePerDirectionOptions_base(dev->u.pipewire.TYPE);
+#endif
 #ifdef CONFIG_AUDIO_SDL
     case AUDIODEV_DRIVER_SDL:
         return qapi_AudiodevSdlPerDirectionOptions_base(dev->u.sdl.TYPE);
audio/meson.build +1 -0
index 0722224ba9..65a49c1a10 100644
@@ -19,6 +19,7 @@ foreach m : [
   ['sdl', sdl, files('sdlaudio.c')],
   ['jack', jack, files('jackaudio.c')],
   ['sndio', sndio, files('sndioaudio.c')],
+  ['pipewire', pipewire, files('pwaudio.c')],
   ['spice', spice, files('spiceaudio.c')]
 ]
   if m[1].found()
audio/pwaudio.c new file +811 -0

811 lines not on this page · raw message

meson.build +8 -0
index 6cb2b1a42f..2aa0b397ea 100644
@@ -730,6 +730,12 @@ if not get_option('jack').auto() or have_system
   jack = dependency('jack', required: get_option('jack'),
                     method: 'pkg-config', kwargs: static_kwargs)
 endif
+pipewire = not_found
+if not get_option('pipewire').auto() or (targetos == 'linux' and have_system)
+  pipewire = dependency('libpipewire-0.3', version: '>=0.3.60',
+                    required: get_option('pipewire'),
+                    method: 'pkg-config', kwargs: static_kwargs)
+endif
 sndio = not_found
 if not get_option('sndio').auto() or have_system
   sndio = dependency('sndio', required: get_option('sndio'),
@@ -1667,6 +1673,7 @@ if have_system
     'jack': jack.found(),
     'oss': oss.found(),
     'pa': pulse.found(),
+    'pipewire': pipewire.found(),
     'sdl': sdl.found(),
     'sndio': sndio.found(),
   }
@@ -3978,6 +3985,7 @@ if targetos == 'linux'
   summary_info += {'ALSA support':    alsa}
   summary_info += {'PulseAudio support': pulse}
 endif
+summary_info += {'Pipewire support':   pipewire}
 summary_info += {'JACK support':      jack}
 summary_info += {'brlapi support':    brlapi}
 summary_info += {'vde support':       vde}
meson_options.txt +3 -1
index 6b0900205e..6c5f260a6a 100644
@@ -21,7 +21,7 @@ option('tls_priority', type : 'string', value : 'NORMAL',
 option('default_devices', type : 'boolean', value : true,
        description: 'Include a default selection of devices in emulators')
 option('audio_drv_list', type: 'array', value: ['default'],
-       choices: ['alsa', 'coreaudio', 'default', 'dsound', 'jack', 'oss', 'pa', 'sdl', 'sndio'],
+       choices: ['alsa', 'coreaudio', 'default', 'dsound', 'jack', 'oss', 'pa', 'pipewire', 'sdl', 'sndio'],
        description: 'Set audio driver list')
 option('block_drv_rw_whitelist', type : 'string', value : '',
        description: 'set block driver read-write whitelist (by default affects only QEMU, not tools like qemu-img)')
@@ -255,6 +255,8 @@ option('oss', type: 'feature', value: 'auto',
        description: 'OSS sound support')
 option('pa', type: 'feature', value: 'auto',
        description: 'PulseAudio sound support')
+option('pipewire', type: 'feature', value: 'auto',
+       description: 'Pipewire sound support')
 option('sndio', type: 'feature', value: 'auto',
        description: 'sndio sound support')
 
qapi/audio.json +45 -0

63 lines not on this page · raw message

qemu-options.hx +17 -0
index beeb4475ba..2fd88ccf15 100644
@@ -779,6 +779,11 @@ DEF("audiodev", HAS_ARG, QEMU_OPTION_audiodev,
     "                in|out.name= source/sink device name\n"
     "                in|out.latency= desired latency in microseconds\n"
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+    "-audiodev pipewire,id=id[,prop[=value][,...]]\n"
+    "                in|out.name= source/sink device name\n"
+    "                latency= desired latency in microseconds\n"
+#endif
 #ifdef CONFIG_AUDIO_SDL
     "-audiodev sdl,id=id[,prop[=value][,...]]\n"
     "                in|out.buffer-count= number of buffers\n"
@@ -942,6 +947,18 @@ SRST
         Desired latency in microseconds. The PulseAudio server will try
         to honor this value but actual latencies may be lower or higher.
 
+``-audiodev pipewire,id=id[,prop[=value][,...]]``
+    Creates a backend using Pipewire. This backend is available on
+    most systems.
+
+    Pipewire specific options are:
+
+    ``latency=latency``
+        Add extra latency to playback in microseconds
+
+    ``in|out.name=sink``
+        Use the specified source/sink for recording/playback.
+
 ``-audiodev sdl,id=id[,prop[=value][,...]]``
     Creates a backend using SDL. This backend is available on most
     systems, but you should use your platform's native backend if
scripts/meson-buildoptions.sh +6 -2
index 5d969a94c0..236a714087 100644
@@ -1,7 +1,8 @@
 # This file is generated by meson-buildoptions.py, do not edit!
 meson_options_help() {
-  printf "%s\n" '  --audio-drv-list=CHOICES Set audio driver list [default] (choices: alsa/co'
-  printf "%s\n" '                           reaudio/default/dsound/jack/oss/pa/sdl/sndio)'
+  printf "%s\n" '  --audio-drv-list=CHOICES Set audio driver list [default] (choices: al'
+  printf "%s\n" '                           sa/coreaudio/default/dsound/jack/oss/pa/'
+  printf "%s\n" '                           pipewire/sdl/sndio)'
   printf "%s\n" '  --block-drv-ro-whitelist=VALUE'
   printf "%s\n" '                           set block driver read-only whitelist (by default'
   printf "%s\n" '                           affects only QEMU, not tools like qemu-img)'
@@ -135,6 +136,7 @@ meson_options_help() {
   printf "%s\n" '  oss             OSS sound support'
   printf "%s\n" '  pa              PulseAudio sound support'
   printf "%s\n" '  parallels       parallels image format support'
+  printf "%s\n" '  pipewire        Pipewire sound support'
   printf "%s\n" '  png             PNG support with libpng'
   printf "%s\n" '  pvrdma          Enable PVRDMA support'
   printf "%s\n" '  qcow1           qcow1 image format support'
@@ -369,6 +371,8 @@ _meson_option_parse() {
     --disable-pa) printf "%s" -Dpa=disabled ;;
     --enable-parallels) printf "%s" -Dparallels=enabled ;;
     --disable-parallels) printf "%s" -Dparallels=disabled ;;
+    --enable-pipewire) printf "%s" -Dpipewire=enabled ;;
+    --disable-pipewire) printf "%s" -Dpipewire=disabled ;;
     --with-pkgversion=*) quote_sh "-Dpkgversion=$2" ;;
     --enable-png) printf "%s" -Dpng=enabled ;;
     --disable-png) printf "%s" -Dpng=disabled ;;
Signature · 1 line
2.39.1
#1 lore raw

Hi Dorinda

Quoted 22 lines · Dorinda Bassey

This commit adds a new audiodev backend to allow QEMU to use Pipewire as both an audio sink and source. This backend is available on most systems

Add Pipewire entry points for QEMU Pipewire audio backend Add wrappers for QEMU Pipewire audio backend in qpw_pcm_ops() qpw_write function returns the current state of the stream to pwaudio and Writes some data to the server for playback streams using pipewire spa_ringbuffer implementation.
qpw_read function returns the current state of the stream to pwaudio and reads some data from the server for capture streams using pipewire spa_ringbuffer implementation. These functions qpw_write and qpw_read are called during playback and capture.
Added some functions that convert pw audio formats to QEMU audio format and vice versa which would be needed in the pipewire audio sink and source functions qpw_init_in() & qpw_init_out().
These methods that implement playback and recording will create streams for playback and capture that will start processing and will result in the on_process callbacks to be called.
Built a connection to the Pipewire sound system server in the qpw_audio_init() method.

Quoted 2 lines

I didn't look at buffering/latency details yet, but here are some other comments for this iteration.

thanks

---

Quoted 148 lines

v5:
silence output to the console, use pw debug log
use SPDX identifier
fix typo
change version release

 audio/audio.c                 |   3 +
 audio/audio_template.h        |   4 +
 audio/meson.build             |   1 +
 audio/pwaudio.c               | 811 ++++++++++++++++++++++++++++++++++
 meson.build                   |   8 +
 meson_options.txt             |   4 +-
 qapi/audio.json               |  45 ++
 qemu-options.hx               |  17 +
 scripts/meson-buildoptions.sh |   8 +-
 9 files changed, 898 insertions(+), 3 deletions(-)
 create mode 100644 audio/pwaudio.c
audio/audio.c +3 -0
index 4290309d18..aa55e41ad8 100644
@@ -2069,6 +2069,9 @@ void audio_create_pdos(Audiodev *dev)
 #ifdef CONFIG_AUDIO_PA
         CASE(PA, pa, Pa);
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+        CASE(PIPEWIRE, pipewire, Pipewire);
+#endif
 #ifdef CONFIG_AUDIO_SDL
         CASE(SDL, sdl, Sdl);
 #endif
audio/audio_template.h +4 -0
index 42b4712acb..0f02afb921 100644
@@ -355,6 +355,10 @@ AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev)
     case AUDIODEV_DRIVER_PA:
         return qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.TYPE);
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+    case AUDIODEV_DRIVER_PIPEWIRE:
+        return qapi_AudiodevPipewirePerDirectionOptions_base(dev->u.pipewire.TYPE);
+#endif
 #ifdef CONFIG_AUDIO_SDL
     case AUDIODEV_DRIVER_SDL:
         return qapi_AudiodevSdlPerDirectionOptions_base(dev->u.sdl.TYPE);
audio/meson.build +1 -0
index 0722224ba9..65a49c1a10 100644
@@ -19,6 +19,7 @@ foreach m : [
   ['sdl', sdl, files('sdlaudio.c')],
   ['jack', jack, files('jackaudio.c')],
   ['sndio', sndio, files('sndioaudio.c')],
+  ['pipewire', pipewire, files('pwaudio.c')],
   ['spice', spice, files('spiceaudio.c')]
 ]
   if m[1].found()
audio/pwaudio.c new file +83 -0
new file mode 100644
index 0000000000..7448f0abd0
@@ -0,0 +1,811 @@
+/*
+ * QEMU Pipewire audio driver
+ *
+ * Copyright (c) 2023 Red Hat Inc.
+ *
+ * Author: Dorinda Bassey       <[email protected]>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/module.h"
+#include "audio.h"
+#include <errno.h>
+#include <spa/param/audio/format-utils.h>
+#include <spa/utils/ringbuffer.h>
+#include <spa/utils/result.h>
+
+#include <pipewire/pipewire.h>
+
+#define AUDIO_CAP "pipewire"
+#define RINGBUFFER_SIZE    (1u << 22)
+#define RINGBUFFER_MASK    (RINGBUFFER_SIZE - 1)
+#define BUFFER_SAMPLES    512
+
+#include "audio_int.h"
+
+enum {
+    MODE_SINK,
+    MODE_SOURCE
+};
+
+typedef struct pwaudio {
+    Audiodev *dev;
+    struct pw_thread_loop *thread_loop;
+    struct pw_context *context;
+
+    struct pw_core *core;
+    struct spa_hook core_listener;
+    int seq;
+} pwaudio;
+
+typedef struct PWVoice {
+    pwaudio *g;
+    bool enabled;
+    struct pw_stream *stream;
+    struct spa_hook stream_listener;
+    struct spa_audio_info_raw info;
+    uint32_t frame_size;
+    struct spa_ringbuffer ring;
+    uint8_t buffer[RINGBUFFER_SIZE];
+
+    uint32_t mode;
+    struct pw_properties *props;
+} PWVoice;
+
+typedef struct PWVoiceOut {
+    HWVoiceOut hw;
+    PWVoice v;
+} PWVoiceOut;
+
+typedef struct PWVoiceIn {
+    HWVoiceIn hw;
+    PWVoice v;
+} PWVoiceIn;
+
+static void
+stream_destroy(void *data)
+{
+    PWVoice *v = (PWVoice *) data;
+    spa_hook_remove(&v->stream_listener);
+    v->stream = NULL;
+}
+
+/* output data processing function to read stuffs from the buffer */
+static void
+playback_on_process(void *data)
+{
+    PWVoice *v = (PWVoice *) data;
+    void *p;
+    struct pw_buffer *b;
+    struct spa_buffer *buf;
+    uint32_t n_frames, req, index, n_bytes;

audio/pwaudio.c line 93

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    int32_t avail;
+
+    if (!v->stream) {
+        return;
+    }
+
+    /* obtain a buffer to read from */
+    b = pw_stream_dequeue_buffer(v->stream);
+    if (b == NULL) {
+        pw_log_warn("out of buffers: %m");

We don't use %m in QEMU, but error_report("..%s", strerror(errno))

Quoted 188 lines
audio/pwaudio.c new file +188 -0
+        return;
+    }
+
+    buf = b->buffer;
+    p = buf->datas[0].data;
+    if (p == NULL) {
+        return;
+    }
+    req = b->requested * v->frame_size;
+    if (req == 0) {
+        req = 4096 * v->frame_size;
+    }
+    n_frames = SPA_MIN(req, buf->datas[0].maxsize);
+    n_bytes = n_frames * v->frame_size;
+
+    /* get no of available bytes to read data from buffer */
+
+    avail = spa_ringbuffer_get_read_index(&v->ring, &index);
+
+    if (!v->enabled) {
+        avail = 0;
+    }
+
+    if (avail == 0) {
+        memset(p, 0, n_bytes);
+    } else {
+        if (avail < (int32_t) n_bytes) {
+            n_bytes = avail;
+        }
+
+        spa_ringbuffer_read_data(&v->ring,
+                                    v->buffer, RINGBUFFER_SIZE,
+                                    index & RINGBUFFER_MASK, p, n_bytes);
+
+        index += n_bytes;
+        spa_ringbuffer_read_update(&v->ring, index);
+    }
+
+    buf->datas[0].chunk->offset = 0;
+    buf->datas[0].chunk->stride = v->frame_size;
+    buf->datas[0].chunk->size = n_bytes;
+
+    /* queue the buffer for playback */
+    pw_stream_queue_buffer(v->stream, b);
+}
+
+/* output data processing function to generate stuffs in the buffer */
+static void
+capture_on_process(void *data)
+{
+    PWVoice *v = (PWVoice *) data;
+    void *p;
+    struct pw_buffer *b;
+    struct spa_buffer *buf;
+    int32_t filled;
+    uint32_t index, offs, n_bytes;
+
+    if (!v->stream) {
+        return;
+    }
+
+    /* obtain a buffer */
+    b = pw_stream_dequeue_buffer(v->stream);
+    if (b == NULL) {
+        pw_log_warn("out of buffers: %m");
+        return;
+    }
+
+    /* Write data into buffer */
+    buf = b->buffer;
+    p = buf->datas[0].data;
+    if (p == NULL) {
+        return;
+    }
+    offs = SPA_MIN(buf->datas[0].chunk->offset, buf->datas[0].maxsize);
+    n_bytes = SPA_MIN(buf->datas[0].chunk->size, buf->datas[0].maxsize - offs);
+
+    filled = spa_ringbuffer_get_write_index(&v->ring, &index);
+
+    if (!v->enabled) {
+        n_bytes = 0;
+    }
+
+    if (filled < 0) {
+        pw_log_warn("%p: underrun write:%u filled:%d", p, index, filled);
+    } else {
+        if ((uint32_t) filled + n_bytes > RINGBUFFER_SIZE) {
+            pw_log_warn("%p: overrun write:%u filled:%d + size:%u > max:%u",
+            p, index, filled, n_bytes, RINGBUFFER_SIZE);
+        }
+    }
+    spa_ringbuffer_write_data(&v->ring,
+                                v->buffer, RINGBUFFER_SIZE,
+                                index & RINGBUFFER_MASK,
+                                SPA_PTROFF(p, offs, void), n_bytes);
+    index += n_bytes;
+    spa_ringbuffer_write_update(&v->ring, index);
+
+    /* queue the buffer for playback */
+    pw_stream_queue_buffer(v->stream, b);
+}
+
+static void
+on_stream_state_changed(void *_data, enum pw_stream_state old,
+                        enum pw_stream_state state, const char *error)
+{
+    PWVoice *v = (PWVoice *) _data;
+
+    pw_log_debug("stream state: \"%s\"\n", pw_stream_state_as_string(state));
+
+    switch (state) {
+    case PW_STREAM_STATE_ERROR:
+    case PW_STREAM_STATE_UNCONNECTED:
+        {
+            break;
+        }
+    case PW_STREAM_STATE_PAUSED:
+        pw_log_debug("node id: %d\n", pw_stream_get_node_id(v->stream));
+        break;
+    case PW_STREAM_STATE_CONNECTING:
+    case PW_STREAM_STATE_STREAMING:
+        break;
+    }
+}
+
+static const struct pw_stream_events capture_stream_events = {
+    PW_VERSION_STREAM_EVENTS,
+    .destroy = stream_destroy,
+    .state_changed = on_stream_state_changed,
+    .process = capture_on_process
+};
+
+static const struct pw_stream_events playback_stream_events = {
+    PW_VERSION_STREAM_EVENTS,
+    .destroy = stream_destroy,
+    .state_changed = on_stream_state_changed,
+    .process = playback_on_process
+};
+
+static size_t
+qpw_read(HWVoiceIn *hw, void *data, size_t len)
+{
+    PWVoiceIn *pw = (PWVoiceIn *) hw;
+    PWVoice *v = &pw->v;
+    pwaudio *c = v->g;
+    const char *error = NULL;
+    size_t l;
+    int32_t avail;
+    uint32_t index;
+
+    pw_thread_loop_lock(c->thread_loop);
+    if (pw_stream_get_state(v->stream, &error) != PW_STREAM_STATE_STREAMING) {
+        /* wait for stream to become ready */
+        l = 0;
+        goto done_unlock;
+    }
+    /* get no of available bytes to read data from buffer */
+    avail = spa_ringbuffer_get_read_index(&v->ring, &index);
+
+    if (avail < (int32_t) len) {
+        len = avail;
+    }
+
+    spa_ringbuffer_read_data(&v->ring,
+                             v->buffer, RINGBUFFER_SIZE,
+                             index & RINGBUFFER_MASK, data, len);
+    index += len;
+    spa_ringbuffer_read_update(&v->ring, index);
+    l = len;
+
+done_unlock:
+    pw_thread_loop_unlock(c->thread_loop);
+    return l;
+}
+
+static size_t
+qpw_write(HWVoiceOut *hw, void *data, size_t len)
+{
+    PWVoiceOut *pw = (PWVoiceOut *) hw;
+    PWVoice *v = &pw->v;
+    pwaudio *c = v->g;
+    const char *error = NULL;
+    const int periods = 3;
+    size_t l;
+    int32_t filled, avail;
+    uint32_t index;
+
+    pw_thread_loop_lock(c->thread_loop);

audio/pwaudio.c line 291

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    if (pw_stream_get_state(v->stream, &error) != PW_STREAM_STATE_STREAMING) {
+        /* wait for stream to become ready */
+        l = 0;
+        goto done_unlock;
+    }
+    filled = spa_ringbuffer_get_write_index(&v->ring, &index);
+
+    avail = BUFFER_SAMPLES * v->frame_size * periods - filled;
+
+    pw_log_debug("%u %u %u %zu", filled, avail, index, len);

use trace

Quoted 154 lines
audio/pwaudio.c new file +154 -0
+
+    if (len > avail) {
+        len = avail;
+    }
+
+    if (filled < 0) {
+        pw_log_warn("%p: underrun write:%u filled:%d", pw, index, filled);
+    } else {
+        if ((uint32_t) filled + len > RINGBUFFER_SIZE) {
+            pw_log_warn("%p: overrun write:%u filled:%d + size:%zu > max:%u",
+            pw, index, filled, len, RINGBUFFER_SIZE);
+        }
+    }
+
+    spa_ringbuffer_write_data(&v->ring,
+                                v->buffer, RINGBUFFER_SIZE,
+                                index & RINGBUFFER_MASK, data, len);
+    index += len;
+    spa_ringbuffer_write_update(&v->ring, index);
+    l = len;
+
+done_unlock:
+    pw_thread_loop_unlock(c->thread_loop);
+    return l;
+}
+
+static int
+audfmt_to_pw(AudioFormat fmt, int endianness)
+{
+    int format;
+
+    switch (fmt) {
+    case AUDIO_FORMAT_S8:
+        format = SPA_AUDIO_FORMAT_S8;
+        break;
+    case AUDIO_FORMAT_U8:
+        format = SPA_AUDIO_FORMAT_U8;
+        break;
+    case AUDIO_FORMAT_S16:
+        format = endianness ? SPA_AUDIO_FORMAT_S16_BE : SPA_AUDIO_FORMAT_S16_LE;
+        break;
+    case AUDIO_FORMAT_U16:
+        format = endianness ? SPA_AUDIO_FORMAT_U16_BE : SPA_AUDIO_FORMAT_U16_LE;
+        break;
+    case AUDIO_FORMAT_S32:
+        format = endianness ? SPA_AUDIO_FORMAT_S32_BE : SPA_AUDIO_FORMAT_S32_LE;
+        break;
+    case AUDIO_FORMAT_U32:
+        format = endianness ? SPA_AUDIO_FORMAT_U32_BE : SPA_AUDIO_FORMAT_U32_LE;
+        break;
+    case AUDIO_FORMAT_F32:
+        format = endianness ? SPA_AUDIO_FORMAT_F32_BE : SPA_AUDIO_FORMAT_F32_LE;
+        break;
+    default:
+        dolog("Internal logic error: Bad audio format %d\n", fmt);
+        format = SPA_AUDIO_FORMAT_U8;
+        break;
+    }
+    return format;
+}
+
+static AudioFormat
+pw_to_audfmt(enum spa_audio_format fmt, int *endianness,
+             uint32_t *frame_size)
+{
+    switch (fmt) {
+    case SPA_AUDIO_FORMAT_S8:
+        *frame_size = 1;
+        return AUDIO_FORMAT_S8;
+    case SPA_AUDIO_FORMAT_U8:
+        *frame_size = 1;
+        return AUDIO_FORMAT_U8;
+    case SPA_AUDIO_FORMAT_S16_BE:
+        *frame_size = 2;
+        *endianness = 1;
+        return AUDIO_FORMAT_S16;
+    case SPA_AUDIO_FORMAT_S16_LE:
+        *frame_size = 2;
+        *endianness = 0;
+        return AUDIO_FORMAT_S16;
+    case SPA_AUDIO_FORMAT_U16_BE:
+        *frame_size = 2;
+        *endianness = 1;
+        return AUDIO_FORMAT_U16;
+    case SPA_AUDIO_FORMAT_U16_LE:
+        *frame_size = 2;
+        *endianness = 0;
+        return AUDIO_FORMAT_U16;
+    case SPA_AUDIO_FORMAT_S32_BE:
+        *frame_size = 4;
+        *endianness = 1;
+        return AUDIO_FORMAT_S32;
+    case SPA_AUDIO_FORMAT_S32_LE:
+        *frame_size = 4;
+        *endianness = 0;
+        return AUDIO_FORMAT_S32;
+    case SPA_AUDIO_FORMAT_U32_BE:
+        *frame_size = 4;
+        *endianness = 1;
+        return AUDIO_FORMAT_U32;
+    case SPA_AUDIO_FORMAT_U32_LE:
+        *frame_size = 4;
+        *endianness = 0;
+        return AUDIO_FORMAT_U32;
+    case SPA_AUDIO_FORMAT_F32_BE:
+        *frame_size = 4;
+        *endianness = 1;
+        return AUDIO_FORMAT_F32;
+    case SPA_AUDIO_FORMAT_F32_LE:
+        *frame_size = 4;
+        *endianness = 0;
+        return AUDIO_FORMAT_F32;
+    default:
+        *frame_size = 1;
+        dolog("Internal logic error: Bad spa_audio_format %d\n", fmt);
+        return AUDIO_FORMAT_U8;
+    }
+}
+
+static int
+create_stream(pwaudio *c, PWVoice *v, const char *name)
+{
+    int res;
+    uint32_t n_params;
+    const struct spa_pod *params[2];
+    uint8_t buffer[1024];
+    struct spa_pod_builder b;
+
+    v->stream = pw_stream_new(c->core, name, NULL);
+
+    if (v->stream == NULL) {
+        res = -errno;
+        goto error;
+    }
+
+    if (v->mode == MODE_SOURCE) {
+        pw_stream_add_listener(v->stream,
+                            &v->stream_listener, &capture_stream_events, v);
+    } else {
+        pw_stream_add_listener(v->stream,
+                            &v->stream_listener, &playback_stream_events, v);
+    }
+
+    n_params = 0;
+    spa_pod_builder_init(&b, buffer, sizeof(buffer));
+    params[n_params++] = spa_format_audio_raw_build(&b,
+                            SPA_PARAM_EnumFormat,
+                            &v->info);
+
+    /* connect the stream to a sink or source */
+    res = pw_stream_connect(v->stream,
+                            v->mode ==
+                            MODE_SOURCE ? PW_DIRECTION_INPUT :
+                            PW_DIRECTION_OUTPUT, PW_ID_ANY,

audio/pwaudio.c line 455

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+                            PW_STREAM_FLAG_AUTOCONNECT |
+                            PW_STREAM_FLAG_MAP_BUFFERS |
+                            PW_STREAM_FLAG_RT_PROCESS, params, n_params);
+    if (res < 0) {
+        goto error;
+    }
+
+    return 0;
+error:
+    return res;

You can return directly instead.

Quoted 11 lines
audio/pwaudio.c new file +11 -0
+}
+
+static void
+pw_destroy(pwaudio *c)
+{
+    if (c->thread_loop) {
+        pw_thread_loop_stop(c->thread_loop);
+    }
+    if (c->core) {
+        pw_core_disconnect(c->core);
+    }

audio/pwaudio.c line 476

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+
+    g_free(c);
+}
+
+static int
+qpw_stream_new(pwaudio *c, PWVoice *v, const char *name)
+{
+    int r;
+
+    pw_thread_loop_lock(c->thread_loop);

You already have the lock when called.

Quoted 55 lines
audio/pwaudio.c new file +55 -0
+
+    switch (v->info.channels) {
+    case 8:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_LFE;
+        v->info.position[4] = SPA_AUDIO_CHANNEL_RL;
+        v->info.position[5] = SPA_AUDIO_CHANNEL_RR;
+        v->info.position[6] = SPA_AUDIO_CHANNEL_SL;
+        v->info.position[7] = SPA_AUDIO_CHANNEL_SR;
+        break;
+    case 6:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_LFE;
+        v->info.position[4] = SPA_AUDIO_CHANNEL_RL;
+        v->info.position[5] = SPA_AUDIO_CHANNEL_RR;
+        break;
+    case 5:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_LFE;
+        v->info.position[4] = SPA_AUDIO_CHANNEL_RC;
+        break;
+    case 4:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_RC;
+        break;
+    case 3:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_LFE;
+        break;
+    case 2:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        break;
+    case 1:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_MONO;
+        break;
+    default:
+        for (size_t i = 0; i < v->info.channels; i++) {
+            v->info.position[i] = SPA_AUDIO_CHANNEL_UNKNOWN;
+        }
+        break;
+    }
+
+    /* create a new unconnected pwstream */
+    r = create_stream(c, v, name);
+    if (r < 0) {

audio/pwaudio.c line 541

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+        goto error;
+    }
+
+    pw_thread_loop_unlock(c->thread_loop);
+    return r;
+
+error:
+    AUD_log(AUDIO_CAP, "Failed to create stream.");
+    pw_thread_loop_unlock(c->thread_loop);
+    pw_destroy(c);

You are freeing c (and other data) on stream creation error. This will later crash during fini(), or other events, I guess.

There is a single "goto error", you could move it there.

Quoted 21 lines
audio/pwaudio.c new file +21 -0
+    return -1;
+}
+
+static int
+qpw_init_out(HWVoiceOut *hw, struct audsettings *as, void *drv_opaque)
+{
+    PWVoiceOut *pw = (PWVoiceOut *) hw;
+    PWVoice *v = &pw->v;
+    struct audsettings obt_as = *as;
+    pwaudio *c = v->g = drv_opaque;
+    AudiodevPipewireOptions *popts = &c->dev->u.pipewire;
+    AudiodevPipewirePerDirectionOptions *ppdo = popts->out;
+    int r;
+    v->enabled = false;
+
+    v->mode = MODE_SINK;
+
+    pw_thread_loop_lock(c->thread_loop);
+
+    v->info.format = audfmt_to_pw(as->fmt, as->endianness);
+    v->info.channels = as->nchannels;

audio/pwaudio.c line 572

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    v->info.rate = as->freq;
+
+    obt_as.fmt =
+        pw_to_audfmt(v->info.format, &obt_as.endianness, &v->frame_size);
+    v->frame_size *= as->nchannels;
+
+    /* call the function that creates a new stream for playback */
+    r = qpw_stream_new(c, v, ppdo->stream_name ? : c->dev->id);
+    if (r < 0) {
+        pw_log_error("qpw_stream_new for playback failed\n ");

Use error_report() instead

Quoted 4 lines
audio/pwaudio.c new file +4 -0
+        goto fail;
+    }
+
+    /* report the audio format we support */

audio/pwaudio.c line 586

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    audio_pcm_init_info(&hw->info, &obt_as);
+
+    /* report the buffer size to qemu */
+    hw->samples = BUFFER_SAMPLES;
+
+    pw_thread_loop_unlock(c->thread_loop);
+    return 0;
+fail:
+    pw_thread_loop_unlock(c->thread_loop);
+    return -1;

There is a single "goto fail", you could move that here.

Quoted 19 lines
audio/pwaudio.c new file +19 -0
+}
+
+static int
+qpw_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
+{
+    PWVoiceIn *pw = (PWVoiceIn *) hw;
+    PWVoice *v = &pw->v;
+    struct audsettings obt_as = *as;
+    pwaudio *c = v->g = drv_opaque;
+    AudiodevPipewireOptions *popts = &c->dev->u.pipewire;
+    AudiodevPipewirePerDirectionOptions *ppdo = popts->in;
+    int r;
+    v->enabled = false;
+
+    v->mode = MODE_SOURCE;
+    pw_thread_loop_lock(c->thread_loop);
+
+    v->info.format = audfmt_to_pw(as->fmt, as->endianness);
+    v->info.channels = as->nchannels;

audio/pwaudio.c line 615

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    v->info.rate = as->freq;
+
+    obt_as.fmt =
+        pw_to_audfmt(v->info.format, &obt_as.endianness, &v->frame_size);
+    v->frame_size *= as->nchannels;
+
+    /* call the function that creates a new stream for recording */
+    r = qpw_stream_new(c, v, ppdo->stream_name ? : c->dev->id);
+    if (r < 0) {
+        pw_log_error("qpw_stream_new for recording failed\n ");

Use error_report() instead

Quoted 4 lines
audio/pwaudio.c new file +4 -0
+        goto fail;
+    }
+
+    /* report the audio format we support */

audio/pwaudio.c line 586

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    audio_pcm_init_info(&hw->info, &obt_as);
+
+    /* report the buffer size to qemu */
+    hw->samples = BUFFER_SAMPLES;
+
+    pw_thread_loop_unlock(c->thread_loop);
+    return 0;
+fail:
+    pw_thread_loop_unlock(c->thread_loop);
+    return -1;

There is a single "goto fail", you could move that here.

Quoted 45 lines
audio/pwaudio.c new file +45 -0
+}
+
+static void
+qpw_fini_out(HWVoiceOut *hw)
+{
+    PWVoiceOut *pw = (PWVoiceOut *) hw;
+    PWVoice *v = &pw->v;
+
+    if (v->stream) {
+        pwaudio *c = v->g;
+        pw_thread_loop_lock(c->thread_loop);
+        pw_stream_destroy(v->stream);
+        v->stream = NULL;
+        pw_thread_loop_unlock(c->thread_loop);
+    }
+}
+
+static void
+qpw_fini_in(HWVoiceIn *hw)
+{
+    PWVoiceIn *pw = (PWVoiceIn *) hw;
+    PWVoice *v = &pw->v;
+
+    if (v->stream) {
+        pwaudio *c = v->g;
+        pw_thread_loop_lock(c->thread_loop);
+        pw_stream_destroy(v->stream);
+        v->stream = NULL;
+        pw_thread_loop_unlock(c->thread_loop);
+    }
+}
+
+static void
+qpw_enable_out(HWVoiceOut *hw, bool enable)
+{
+    PWVoiceOut *po = (PWVoiceOut *) hw;
+    PWVoice *v = &po->v;
+    v->enabled = enable;
+}
+
+static void
+qpw_enable_in(HWVoiceIn *hw, bool enable)
+{
+    PWVoiceIn *pi = (PWVoiceIn *) hw;
+    PWVoice *v = &pi->v;

audio/pwaudio.c line 684

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    v->enabled = enable;
+}
+
+static void
+on_core_error(void *data, uint32_t id, int seq, int res, const char *message)
+{
+    pwaudio *pw = data;
+
+    pw_log_warn("error id:%u seq:%d res:%d (%s): %s",
+                id, seq, res, spa_strerror(res), message);

Use error_report() instead

audio/pwaudio.c line 695

Quoted 11 lines
audio/pwaudio.c new file +11 -0
+
+    pw_thread_loop_signal(pw->thread_loop, FALSE);
+}
+
+static void
+on_core_done(void *data, uint32_t id, int seq)
+{
+    pwaudio *pw = data;
+    if (id == PW_ID_CORE) {
+        pw->seq = seq;
+        pw_thread_loop_signal(pw->thread_loop, FALSE);

What are those thread_loop_signal() for? Maybe leave a comment?

Quoted 8 lines
audio/pwaudio.c new file +8 -0
+    }
+}
+
+static const struct pw_core_events core_events = {
+    PW_VERSION_CORE_EVENTS,
+    .done = on_core_done,
+    .error = on_core_error,
+};

audio/pwaudio.c line 713

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+
+static void *
+qpw_audio_init(Audiodev *dev)
+{
+    pwaudio *pw;
+    pw = g_new0(pwaudio, 1);
+    pw_init(NULL, NULL);
+
+    AudiodevPipewireOptions *popts;
+    pw_log_debug("Initialize PW context\n");

Can you replace the logging with traces? That's what QEMU uses.

audio/pwaudio.c line 726

Quoted 13 lines
audio/pwaudio.c new file +13 -0
+    assert(dev->driver == AUDIODEV_DRIVER_PIPEWIRE);
+    popts = &dev->u.pipewire;
+
+    if (!popts->has_latency) {
+        popts->has_latency = true;
+        popts->latency = 15000;
+    }
+
+    pw->dev = dev;
+    pw->thread_loop = pw_thread_loop_new("Pipewire thread loop", NULL);
+    if (pw->thread_loop == NULL) {
+        goto fail;
+    }

Either we handle allocation failures everywhere, or we don't. Unless the documentation is explicit about handling allocation/initialization errors, I would say we don't have to, in init/fini().

audio/pwaudio.c line 729

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+    pw->context =
+        pw_context_new(pw_thread_loop_get_loop(pw->thread_loop), NULL, 0);
+

Why not handle errors here?

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    if (pw_thread_loop_start(pw->thread_loop) < 0) {
+        goto fail;
+    }
+
+    pw_thread_loop_lock(pw->thread_loop);
+
+    pw->core = pw_context_connect(pw->context, NULL, 0);
+    if (pw->core == NULL) {
+        goto fail;
+    }

audio/pwaudio.c line 749

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+
+    pw_core_add_listener(pw->core, &pw->core_listener, &core_events, pw);
+
+    pw_thread_loop_unlock(pw->thread_loop);
+
+    return pw;
+
+fail:
+    AUD_log(AUDIO_CAP, "Failed to initialize PW context");
+    pw_thread_loop_unlock(pw->thread_loop);

Bad after first "goto fail"

Quoted 258 lines
audio/pwaudio.c new file +62 -0
+    pw_context_destroy(pw->context);
+    pw_thread_loop_destroy(pw->thread_loop);
+    g_free(pw);
+    return NULL;
+}
+
+static void
+qpw_audio_fini(void *opaque)
+{
+    pwaudio *pw = opaque;
+
+    pw_thread_loop_stop(pw->thread_loop);
+
+    if (pw->core) {
+        spa_hook_remove(&pw->core_listener);
+        spa_zero(pw->core_listener);
+        pw_core_disconnect(pw->core);
+    }
+
+    if (pw->context) {
+        pw_context_destroy(pw->context);
+    }
+    pw_thread_loop_destroy(pw->thread_loop);
+
+    g_free(pw);
+}
+
+static struct audio_pcm_ops qpw_pcm_ops = {
+    .init_out = qpw_init_out,
+    .fini_out = qpw_fini_out,
+    .write = qpw_write,
+    .buffer_get_free = audio_generic_buffer_get_free,
+    .run_buffer_out = audio_generic_run_buffer_out,
+    .enable_out = qpw_enable_out,
+
+    .init_in = qpw_init_in,
+    .fini_in = qpw_fini_in,
+    .read = qpw_read,
+    .run_buffer_in = audio_generic_run_buffer_in,
+    .enable_in = qpw_enable_in
+};
+
+static struct audio_driver pw_audio_driver = {
+    .name = "pipewire",
+    .descr = "http://www.pipewire.org/",
+    .init = qpw_audio_init,
+    .fini = qpw_audio_fini,
+    .pcm_ops = &qpw_pcm_ops,
+    .can_be_default = 1,
+    .max_voices_out = INT_MAX,
+    .max_voices_in = INT_MAX,
+    .voice_size_out = sizeof(PWVoiceOut),
+    .voice_size_in = sizeof(PWVoiceIn),
+};
+
+static void
+register_audio_pw(void)
+{
+    audio_driver_register(&pw_audio_driver);
+}
+
+type_init(register_audio_pw);
meson.build +8 -0
index 6cb2b1a42f..2aa0b397ea 100644
@@ -730,6 +730,12 @@ if not get_option('jack').auto() or have_system
   jack = dependency('jack', required: get_option('jack'),
                     method: 'pkg-config', kwargs: static_kwargs)
 endif
+pipewire = not_found
+if not get_option('pipewire').auto() or (targetos == 'linux' and have_system)
+  pipewire = dependency('libpipewire-0.3', version: '>=0.3.60',
+                    required: get_option('pipewire'),
+                    method: 'pkg-config', kwargs: static_kwargs)
+endif
 sndio = not_found
 if not get_option('sndio').auto() or have_system
   sndio = dependency('sndio', required: get_option('sndio'),
@@ -1667,6 +1673,7 @@ if have_system
     'jack': jack.found(),
     'oss': oss.found(),
     'pa': pulse.found(),
+    'pipewire': pipewire.found(),
     'sdl': sdl.found(),
     'sndio': sndio.found(),
   }
@@ -3978,6 +3985,7 @@ if targetos == 'linux'
   summary_info += {'ALSA support':    alsa}
   summary_info += {'PulseAudio support': pulse}
 endif
+summary_info += {'Pipewire support':   pipewire}
 summary_info += {'JACK support':      jack}
 summary_info += {'brlapi support':    brlapi}
 summary_info += {'vde support':       vde}
meson_options.txt +3 -1
index 6b0900205e..6c5f260a6a 100644
@@ -21,7 +21,7 @@ option('tls_priority', type : 'string', value : 'NORMAL',
 option('default_devices', type : 'boolean', value : true,
        description: 'Include a default selection of devices in emulators')
 option('audio_drv_list', type: 'array', value: ['default'],
-       choices: ['alsa', 'coreaudio', 'default', 'dsound', 'jack', 'oss', 'pa', 'sdl', 'sndio'],
+       choices: ['alsa', 'coreaudio', 'default', 'dsound', 'jack', 'oss', 'pa', 'pipewire', 'sdl', 'sndio'],
        description: 'Set audio driver list')
 option('block_drv_rw_whitelist', type : 'string', value : '',
        description: 'set block driver read-write whitelist (by default affects only QEMU, not tools like qemu-img)')
@@ -255,6 +255,8 @@ option('oss', type: 'feature', value: 'auto',
        description: 'OSS sound support')
 option('pa', type: 'feature', value: 'auto',
        description: 'PulseAudio sound support')
+option('pipewire', type: 'feature', value: 'auto',
+       description: 'Pipewire sound support')
 option('sndio', type: 'feature', value: 'auto',
        description: 'sndio sound support')
 
qapi/audio.json +45 -0
index 4e54c00f51..9a0d7d9ece 100644
@@ -324,6 +324,48 @@
     '*out':    'AudiodevPaPerDirectionOptions',
     '*server': 'str' } }
 
+##
+# @AudiodevPipewirePerDirectionOptions:
+#
+# Options of the Pipewire backend that are used for both playback and
+# recording.
+#
+# @name: name of the sink/source to use
+#
+# @stream-name: name of the Pipewire stream created by qemu.  Can be
+#               used to identify the stream in Pipewire when you
+#               create multiple Pipewire devices or run multiple qemu
+#               instances (default: audiodev's id, since 7.1)
+#
+#
+# Since: 8.0
+##
+{ 'struct': 'AudiodevPipewirePerDirectionOptions',
+  'base': 'AudiodevPerDirectionOptions',
+  'data': {
+    '*name': 'str',
+    '*stream-name': 'str' } }
+
+##
+# @AudiodevPipewireOptions:
+#
+# Options of the Pipewire audio backend.
+#
+# @in: options of the capture stream
+#
+# @out: options of the playback stream
+#
+# @latency: add latency to playback in microseconds
+#           (default 15000)
+#
+# Since: 8.0
+##
+{ 'struct': 'AudiodevPipewireOptions',
+  'data': {
+    '*in':     'AudiodevPipewirePerDirectionOptions',
+    '*out':    'AudiodevPipewirePerDirectionOptions',
+    '*latency': 'uint32' } }
+
 ##
 # @AudiodevSdlPerDirectionOptions:
 #
@@ -416,6 +458,7 @@
             { 'name': 'jack', 'if': 'CONFIG_AUDIO_JACK' },
             { 'name': 'oss', 'if': 'CONFIG_AUDIO_OSS' },
             { 'name': 'pa', 'if': 'CONFIG_AUDIO_PA' },
+            { 'name': 'pipewire', 'if': 'CONFIG_AUDIO_PIPEWIRE' },
             { 'name': 'sdl', 'if': 'CONFIG_AUDIO_SDL' },
             { 'name': 'sndio', 'if': 'CONFIG_AUDIO_SNDIO' },
             { 'name': 'spice', 'if': 'CONFIG_SPICE' },
@@ -456,6 +499,8 @@
                    'if': 'CONFIG_AUDIO_OSS' },
     'pa':        { 'type': 'AudiodevPaOptions',
                    'if': 'CONFIG_AUDIO_PA' },
+    'pipewire':  { 'type': 'AudiodevPipewireOptions',
+                   'if': 'CONFIG_AUDIO_PIPEWIRE' },
     'sdl':       { 'type': 'AudiodevSdlOptions',
                    'if': 'CONFIG_AUDIO_SDL' },
     'sndio':     { 'type': 'AudiodevSndioOptions',
qemu-options.hx +17 -0
index beeb4475ba..2fd88ccf15 100644
@@ -779,6 +779,11 @@ DEF("audiodev", HAS_ARG, QEMU_OPTION_audiodev,
     "                in|out.name= source/sink device name\n"
     "                in|out.latency= desired latency in microseconds\n"
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+    "-audiodev pipewire,id=id[,prop[=value][,...]]\n"
+    "                in|out.name= source/sink device name\n"
+    "                latency= desired latency in microseconds\n"
+#endif
 #ifdef CONFIG_AUDIO_SDL
     "-audiodev sdl,id=id[,prop[=value][,...]]\n"
     "                in|out.buffer-count= number of buffers\n"
@@ -942,6 +947,18 @@ SRST
         Desired latency in microseconds. The PulseAudio server will try
         to honor this value but actual latencies may be lower or higher.
 
+``-audiodev pipewire,id=id[,prop[=value][,...]]``
+    Creates a backend using Pipewire. This backend is available on
+    most systems.
+
+    Pipewire specific options are:
+
+    ``latency=latency``
+        Add extra latency to playback in microseconds
+
+    ``in|out.name=sink``
+        Use the specified source/sink for recording/playback.
+
 ``-audiodev sdl,id=id[,prop[=value][,...]]``
     Creates a backend using SDL. This backend is available on most
     systems, but you should use your platform's native backend if
scripts/meson-buildoptions.sh +6 -3
index 5d969a94c0..236a714087 100644
@@ -1,7 +1,8 @@
 # This file is generated by meson-buildoptions.py, do not edit!
 meson_options_help() {
-  printf "%s\n" '  --audio-drv-list=CHOICES Set audio driver list [default] (choices: alsa/co'
-  printf "%s\n" '                           reaudio/default/dsound/jack/oss/pa/sdl/sndio)'
+  printf "%s\n" '  --audio-drv-list=CHOICES Set audio driver list [default] (choices: al'
+  printf "%s\n" '                           sa/coreaudio/default/dsound/jack/oss/pa/'
+  printf "%s\n" '                           pipewire/sdl/sndio)'
   printf "%s\n" '  --block-drv-ro-whitelist=VALUE'
   printf "%s\n" '                           set block driver read-only whitelist (by default'
   printf "%s\n" '                           affects only QEMU, not tools like qemu-img)'
@@ -135,6 +136,7 @@ meson_options_help() {
   printf "%s\n" '  oss             OSS sound support'
   printf "%s\n" '  pa              PulseAudio sound support'
   printf "%s\n" '  parallels       parallels image format support'
+  printf "%s\n" '  pipewire        Pipewire sound support'
   printf "%s\n" '  png             PNG support with libpng'
   printf "%s\n" '  pvrdma          Enable PVRDMA support'
   printf "%s\n" '  qcow1           qcow1 image format support'
@@ -369,6 +371,8 @@ _meson_option_parse() {
     --disable-pa) printf "%s" -Dpa=disabled ;;
     --enable-parallels) printf "%s" -Dparallels=enabled ;;
     --disable-parallels) printf "%s" -Dparallels=disabled ;;
+    --enable-pipewire) printf "%s" -Dpipewire=enabled ;;
+    --disable-pipewire) printf "%s" -Dpipewire=disabled ;;
     --with-pkgversion=*) quote_sh "-Dpkgversion=$2" ;;
     --enable-png) printf "%s" -Dpng=enabled ;;
     --disable-png) printf "%s" -Dpng=disabled ;;
--

2.39.1

Signature · 1 line
Marc-André Lureau
#2 lore raw

Thanks for the feedback!

your comments have been addressed in the latest patch version.

What are those thread_loop_signal() for? Maybe leave a comment?

the explanation of the function is in the reference header file.

regards,
Dorinda.

Quoted 1,201 lines · Marc-André Lureau

Hi Dorinda

Quoted 22 lines · Dorinda Bassey

This commit adds a new audiodev backend to allow QEMU to use Pipewire as both an audio sink and source. This backend is available on most systems

Add Pipewire entry points for QEMU Pipewire audio backend Add wrappers for QEMU Pipewire audio backend in qpw_pcm_ops() qpw_write function returns the current state of the stream to pwaudio and Writes some data to the server for playback streams using pipewire spa_ringbuffer implementation.
qpw_read function returns the current state of the stream to pwaudio and reads some data from the server for capture streams using pipewire spa_ringbuffer implementation. These functions qpw_write and qpw_read are called during playback and capture.
Added some functions that convert pw audio formats to QEMU audio format and vice versa which would be needed in the pipewire audio sink and source functions qpw_init_in() & qpw_init_out().
These methods that implement playback and recording will create streams for playback and capture that will start processing and will result in the on_process callbacks to be called.
Built a connection to the Pipewire sound system server in the qpw_audio_init() method.

Quoted 2 lines

I didn't look at buffering/latency details yet, but here are some other comments for this iteration.

thanks

---

audio/audio_template.h AudiodevPerDirectionOptions *glue(audio_get_pdo_,

Quoted 37 lines

v5:
silence output to the console, use pw debug log
use SPDX identifier
fix typo
change version release

 audio/audio.c                 |   3 +
 audio/audio_template.h        |   4 +
 audio/meson.build             |   1 +
 audio/pwaudio.c               | 811 ++++++++++++++++++++++++++++++++++
 meson.build                   |   8 +
 meson_options.txt             |   4 +-
 qapi/audio.json               |  45 ++
 qemu-options.hx               |  17 +
 scripts/meson-buildoptions.sh |   8 +-
 9 files changed, 898 insertions(+), 3 deletions(-)
 create mode 100644 audio/pwaudio.c
audio/audio.c +3 -0
index 4290309d18..aa55e41ad8 100644
@@ -2069,6 +2069,9 @@ void audio_create_pdos(Audiodev *dev)
 #ifdef CONFIG_AUDIO_PA
         CASE(PA, pa, Pa);
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+        CASE(PIPEWIRE, pipewire, Pipewire);
+#endif
 #ifdef CONFIG_AUDIO_SDL
         CASE(SDL, sdl, Sdl);
 #endif
audio/audio_template.h +0 -0
index 42b4712acb..0f02afb921 100644
@@ -355,6 +355,10 @@ AudiodevPerDirectionOptions *glue(audio_get_pdo_,

TYPE)(Audiodev *dev)

audio/audio_template.h AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev)

Quoted 6 lines
audio/audio_template.h +3 -0
     case AUDIODEV_DRIVER_PA:
         return qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.TYPE);
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+    case AUDIODEV_DRIVER_PIPEWIRE:
+        return

qapi_AudiodevPipewirePerDirectionOptions_base(dev->u.pipewire.TYPE);

audio/audio_template.h AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev)

Quoted 4 lines
audio/audio_template.h +1 -0
+#endif
 #ifdef CONFIG_AUDIO_SDL
     case AUDIODEV_DRIVER_SDL:
         return

qapi_AudiodevSdlPerDirectionOptions_base(dev->u.sdl.TYPE);

Quoted 101 lines
audio/meson.build +1 -0
index 0722224ba9..65a49c1a10 100644
@@ -19,6 +19,7 @@ foreach m : [
   ['sdl', sdl, files('sdlaudio.c')],
   ['jack', jack, files('jackaudio.c')],
   ['sndio', sndio, files('sndioaudio.c')],
+  ['pipewire', pipewire, files('pwaudio.c')],
   ['spice', spice, files('spiceaudio.c')]
 ]
   if m[1].found()
audio/pwaudio.c new file +83 -0
new file mode 100644
index 0000000000..7448f0abd0
@@ -0,0 +1,811 @@
+/*
+ * QEMU Pipewire audio driver
+ *
+ * Copyright (c) 2023 Red Hat Inc.
+ *
+ * Author: Dorinda Bassey       <[email protected]>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/module.h"
+#include "audio.h"
+#include <errno.h>
+#include <spa/param/audio/format-utils.h>
+#include <spa/utils/ringbuffer.h>
+#include <spa/utils/result.h>
+
+#include <pipewire/pipewire.h>
+
+#define AUDIO_CAP "pipewire"
+#define RINGBUFFER_SIZE    (1u << 22)
+#define RINGBUFFER_MASK    (RINGBUFFER_SIZE - 1)
+#define BUFFER_SAMPLES    512
+
+#include "audio_int.h"
+
+enum {
+    MODE_SINK,
+    MODE_SOURCE
+};
+
+typedef struct pwaudio {
+    Audiodev *dev;
+    struct pw_thread_loop *thread_loop;
+    struct pw_context *context;
+
+    struct pw_core *core;
+    struct spa_hook core_listener;
+    int seq;
+} pwaudio;
+
+typedef struct PWVoice {
+    pwaudio *g;
+    bool enabled;
+    struct pw_stream *stream;
+    struct spa_hook stream_listener;
+    struct spa_audio_info_raw info;
+    uint32_t frame_size;
+    struct spa_ringbuffer ring;
+    uint8_t buffer[RINGBUFFER_SIZE];
+
+    uint32_t mode;
+    struct pw_properties *props;
+} PWVoice;
+
+typedef struct PWVoiceOut {
+    HWVoiceOut hw;
+    PWVoice v;
+} PWVoiceOut;
+
+typedef struct PWVoiceIn {
+    HWVoiceIn hw;
+    PWVoice v;
+} PWVoiceIn;
+
+static void
+stream_destroy(void *data)
+{
+    PWVoice *v = (PWVoice *) data;
+    spa_hook_remove(&v->stream_listener);
+    v->stream = NULL;
+}
+
+/* output data processing function to read stuffs from the buffer */
+static void
+playback_on_process(void *data)
+{
+    PWVoice *v = (PWVoice *) data;
+    void *p;
+    struct pw_buffer *b;
+    struct spa_buffer *buf;
+    uint32_t n_frames, req, index, n_bytes;

audio/pwaudio.c line 93

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    int32_t avail;
+
+    if (!v->stream) {
+        return;
+    }
+
+    /* obtain a buffer to read from */
+    b = pw_stream_dequeue_buffer(v->stream);
+    if (b == NULL) {
+        pw_log_warn("out of buffers: %m");

We don't use %m in QEMU, but error_report("..%s", strerror(errno))

Quoted 23 lines
audio/pwaudio.c new file +23 -0
+        return;
+    }
+
+    buf = b->buffer;
+    p = buf->datas[0].data;
+    if (p == NULL) {
+        return;
+    }
+    req = b->requested * v->frame_size;
+    if (req == 0) {
+        req = 4096 * v->frame_size;
+    }
+    n_frames = SPA_MIN(req, buf->datas[0].maxsize);
+    n_bytes = n_frames * v->frame_size;
+
+    /* get no of available bytes to read data from buffer */
+
+    avail = spa_ringbuffer_get_read_index(&v->ring, &index);
+
+    if (!v->enabled) {
+        avail = 0;
+    }
+

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    if (avail == 0) {
+        memset(p, 0, n_bytes);
+    } else {
+        if (avail < (int32_t) n_bytes) {
+            n_bytes = avail;
+        }
+
+        spa_ringbuffer_read_data(&v->ring,
+                                    v->buffer, RINGBUFFER_SIZE,
+                                    index & RINGBUFFER_MASK, p,

n_bytes);

Quoted 33 lines
audio/pwaudio.c new file +33 -0
+
+        index += n_bytes;
+        spa_ringbuffer_read_update(&v->ring, index);
+    }
+
+    buf->datas[0].chunk->offset = 0;
+    buf->datas[0].chunk->stride = v->frame_size;
+    buf->datas[0].chunk->size = n_bytes;
+
+    /* queue the buffer for playback */
+    pw_stream_queue_buffer(v->stream, b);
+}
+
+/* output data processing function to generate stuffs in the buffer */
+static void
+capture_on_process(void *data)
+{
+    PWVoice *v = (PWVoice *) data;
+    void *p;
+    struct pw_buffer *b;
+    struct spa_buffer *buf;
+    int32_t filled;
+    uint32_t index, offs, n_bytes;
+
+    if (!v->stream) {
+        return;
+    }
+
+    /* obtain a buffer */
+    b = pw_stream_dequeue_buffer(v->stream);
+    if (b == NULL) {
+        pw_log_warn("out of buffers: %m");
+        return;

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    }
+
+    /* Write data into buffer */
+    buf = b->buffer;
+    p = buf->datas[0].data;
+    if (p == NULL) {
+        return;
+    }
+    offs = SPA_MIN(buf->datas[0].chunk->offset, buf->datas[0].maxsize);
+    n_bytes = SPA_MIN(buf->datas[0].chunk->size, buf->datas[0].maxsize

- offs);

audio/pwaudio.c

Quoted 9 lines
audio/pwaudio.c new file +9 -0
+
+    filled = spa_ringbuffer_get_write_index(&v->ring, &index);
+
+    if (!v->enabled) {
+        n_bytes = 0;
+    }
+
+    if (filled < 0) {
+        pw_log_warn("%p: underrun write:%u filled:%d", p, index,

filled);

audio/pwaudio.c

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+    } else {
+        if ((uint32_t) filled + n_bytes > RINGBUFFER_SIZE) {
+            pw_log_warn("%p: overrun write:%u filled:%d + size:%u >

max:%u",

Quoted 11 lines
audio/pwaudio.c new file +11 -0
+            p, index, filled, n_bytes, RINGBUFFER_SIZE);
+        }
+    }
+    spa_ringbuffer_write_data(&v->ring,
+                                v->buffer, RINGBUFFER_SIZE,
+                                index & RINGBUFFER_MASK,
+                                SPA_PTROFF(p, offs, void), n_bytes);
+    index += n_bytes;
+    spa_ringbuffer_write_update(&v->ring, index);
+
+    /* queue the buffer for playback */

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    pw_stream_queue_buffer(v->stream, b);
+}
+
+static void
+on_stream_state_changed(void *_data, enum pw_stream_state old,
+                        enum pw_stream_state state, const char *error)
+{
+    PWVoice *v = (PWVoice *) _data;
+
+    pw_log_debug("stream state: \"%s\"\n",

pw_stream_state_as_string(state));

Quoted 33 lines
audio/pwaudio.c new file +33 -0
+
+    switch (state) {
+    case PW_STREAM_STATE_ERROR:
+    case PW_STREAM_STATE_UNCONNECTED:
+        {
+            break;
+        }
+    case PW_STREAM_STATE_PAUSED:
+        pw_log_debug("node id: %d\n", pw_stream_get_node_id(v->stream));
+        break;
+    case PW_STREAM_STATE_CONNECTING:
+    case PW_STREAM_STATE_STREAMING:
+        break;
+    }
+}
+
+static const struct pw_stream_events capture_stream_events = {
+    PW_VERSION_STREAM_EVENTS,
+    .destroy = stream_destroy,
+    .state_changed = on_stream_state_changed,
+    .process = capture_on_process
+};
+
+static const struct pw_stream_events playback_stream_events = {
+    PW_VERSION_STREAM_EVENTS,
+    .destroy = stream_destroy,
+    .state_changed = on_stream_state_changed,
+    .process = playback_on_process
+};
+
+static size_t
+qpw_read(HWVoiceIn *hw, void *data, size_t len)
+{

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    PWVoiceIn *pw = (PWVoiceIn *) hw;
+    PWVoice *v = &pw->v;
+    pwaudio *c = v->g;
+    const char *error = NULL;
+    size_t l;
+    int32_t avail;
+    uint32_t index;
+
+    pw_thread_loop_lock(c->thread_loop);
+    if (pw_stream_get_state(v->stream, &error) !=

PW_STREAM_STATE_STREAMING) {

Quoted 27 lines
audio/pwaudio.c new file +27 -0
+        /* wait for stream to become ready */
+        l = 0;
+        goto done_unlock;
+    }
+    /* get no of available bytes to read data from buffer */
+    avail = spa_ringbuffer_get_read_index(&v->ring, &index);
+
+    if (avail < (int32_t) len) {
+        len = avail;
+    }
+
+    spa_ringbuffer_read_data(&v->ring,
+                             v->buffer, RINGBUFFER_SIZE,
+                             index & RINGBUFFER_MASK, data, len);
+    index += len;
+    spa_ringbuffer_read_update(&v->ring, index);
+    l = len;
+
+done_unlock:
+    pw_thread_loop_unlock(c->thread_loop);
+    return l;
+}
+
+static size_t
+qpw_write(HWVoiceOut *hw, void *data, size_t len)
+{
+    PWVoiceOut *pw = (PWVoiceOut *) hw;

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    PWVoice *v = &pw->v;
+    pwaudio *c = v->g;
+    const char *error = NULL;
+    const int periods = 3;
+    size_t l;
+    int32_t filled, avail;
+    uint32_t index;
+
+    pw_thread_loop_lock(c->thread_loop);
+    if (pw_stream_get_state(v->stream, &error) !=

PW_STREAM_STATE_STREAMING) {

audio/pwaudio.c line 291

Quoted 9 lines
audio/pwaudio.c new file +9 -0
+        /* wait for stream to become ready */
+        l = 0;
+        goto done_unlock;
+    }
+    filled = spa_ringbuffer_get_write_index(&v->ring, &index);
+
+    avail = BUFFER_SAMPLES * v->frame_size * periods - filled;
+
+    pw_log_debug("%u %u %u %zu", filled, avail, index, len);

use trace

audio/pwaudio.c

Quoted 7 lines
audio/pwaudio.c new file +7 -0
+
+    if (len > avail) {
+        len = avail;
+    }
+
+    if (filled < 0) {
+        pw_log_warn("%p: underrun write:%u filled:%d", pw, index,

filled);

audio/pwaudio.c

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+    } else {
+        if ((uint32_t) filled + len > RINGBUFFER_SIZE) {
+            pw_log_warn("%p: overrun write:%u filled:%d + size:%zu >

max:%u",

Quoted 20 lines
audio/pwaudio.c new file +20 -0
+            pw, index, filled, len, RINGBUFFER_SIZE);
+        }
+    }
+
+    spa_ringbuffer_write_data(&v->ring,
+                                v->buffer, RINGBUFFER_SIZE,
+                                index & RINGBUFFER_MASK, data, len);
+    index += len;
+    spa_ringbuffer_write_update(&v->ring, index);
+    l = len;
+
+done_unlock:
+    pw_thread_loop_unlock(c->thread_loop);
+    return l;
+}
+
+static int
+audfmt_to_pw(AudioFormat fmt, int endianness)
+{
+    int format;

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+
+    switch (fmt) {
+    case AUDIO_FORMAT_S8:
+        format = SPA_AUDIO_FORMAT_S8;
+        break;
+    case AUDIO_FORMAT_U8:
+        format = SPA_AUDIO_FORMAT_U8;
+        break;
+    case AUDIO_FORMAT_S16:
+        format = endianness ? SPA_AUDIO_FORMAT_S16_BE :

SPA_AUDIO_FORMAT_S16_LE;

audio/pwaudio.c

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+        break;
+    case AUDIO_FORMAT_U16:
+        format = endianness ? SPA_AUDIO_FORMAT_U16_BE :

SPA_AUDIO_FORMAT_U16_LE;

audio/pwaudio.c

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+        break;
+    case AUDIO_FORMAT_S32:
+        format = endianness ? SPA_AUDIO_FORMAT_S32_BE :

SPA_AUDIO_FORMAT_S32_LE;

audio/pwaudio.c

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+        break;
+    case AUDIO_FORMAT_U32:
+        format = endianness ? SPA_AUDIO_FORMAT_U32_BE :

SPA_AUDIO_FORMAT_U32_LE;

audio/pwaudio.c

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+        break;
+    case AUDIO_FORMAT_F32:
+        format = endianness ? SPA_AUDIO_FORMAT_F32_BE :

SPA_AUDIO_FORMAT_F32_LE;

Quoted 76 lines
audio/pwaudio.c new file +76 -0
+        break;
+    default:
+        dolog("Internal logic error: Bad audio format %d\n", fmt);
+        format = SPA_AUDIO_FORMAT_U8;
+        break;
+    }
+    return format;
+}
+
+static AudioFormat
+pw_to_audfmt(enum spa_audio_format fmt, int *endianness,
+             uint32_t *frame_size)
+{
+    switch (fmt) {
+    case SPA_AUDIO_FORMAT_S8:
+        *frame_size = 1;
+        return AUDIO_FORMAT_S8;
+    case SPA_AUDIO_FORMAT_U8:
+        *frame_size = 1;
+        return AUDIO_FORMAT_U8;
+    case SPA_AUDIO_FORMAT_S16_BE:
+        *frame_size = 2;
+        *endianness = 1;
+        return AUDIO_FORMAT_S16;
+    case SPA_AUDIO_FORMAT_S16_LE:
+        *frame_size = 2;
+        *endianness = 0;
+        return AUDIO_FORMAT_S16;
+    case SPA_AUDIO_FORMAT_U16_BE:
+        *frame_size = 2;
+        *endianness = 1;
+        return AUDIO_FORMAT_U16;
+    case SPA_AUDIO_FORMAT_U16_LE:
+        *frame_size = 2;
+        *endianness = 0;
+        return AUDIO_FORMAT_U16;
+    case SPA_AUDIO_FORMAT_S32_BE:
+        *frame_size = 4;
+        *endianness = 1;
+        return AUDIO_FORMAT_S32;
+    case SPA_AUDIO_FORMAT_S32_LE:
+        *frame_size = 4;
+        *endianness = 0;
+        return AUDIO_FORMAT_S32;
+    case SPA_AUDIO_FORMAT_U32_BE:
+        *frame_size = 4;
+        *endianness = 1;
+        return AUDIO_FORMAT_U32;
+    case SPA_AUDIO_FORMAT_U32_LE:
+        *frame_size = 4;
+        *endianness = 0;
+        return AUDIO_FORMAT_U32;
+    case SPA_AUDIO_FORMAT_F32_BE:
+        *frame_size = 4;
+        *endianness = 1;
+        return AUDIO_FORMAT_F32;
+    case SPA_AUDIO_FORMAT_F32_LE:
+        *frame_size = 4;
+        *endianness = 0;
+        return AUDIO_FORMAT_F32;
+    default:
+        *frame_size = 1;
+        dolog("Internal logic error: Bad spa_audio_format %d\n", fmt);
+        return AUDIO_FORMAT_U8;
+    }
+}
+
+static int
+create_stream(pwaudio *c, PWVoice *v, const char *name)
+{
+    int res;
+    uint32_t n_params;
+    const struct spa_pod *params[2];
+    uint8_t buffer[1024];
+    struct spa_pod_builder b;
+

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    v->stream = pw_stream_new(c->core, name, NULL);
+
+    if (v->stream == NULL) {
+        res = -errno;
+        goto error;
+    }
+
+    if (v->mode == MODE_SOURCE) {
+        pw_stream_add_listener(v->stream,
+                            &v->stream_listener,

&capture_stream_events, v);

audio/pwaudio.c

Quoted 3 lines
audio/pwaudio.c new file +3 -0
+    } else {
+        pw_stream_add_listener(v->stream,
+                            &v->stream_listener,

&playback_stream_events, v);

Quoted 6 lines
audio/pwaudio.c new file +6 -0
+    }
+
+    n_params = 0;
+    spa_pod_builder_init(&b, buffer, sizeof(buffer));
+    params[n_params++] = spa_format_audio_raw_build(&b,
+                            SPA_PARAM_EnumFormat,

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+                            &v->info);
+
+    /* connect the stream to a sink or source */
+    res = pw_stream_connect(v->stream,
+                            v->mode ==
+                            MODE_SOURCE ? PW_DIRECTION_INPUT :
+                            PW_DIRECTION_OUTPUT, PW_ID_ANY,
+                            PW_STREAM_FLAG_AUTOCONNECT |
+                            PW_STREAM_FLAG_MAP_BUFFERS |
+                            PW_STREAM_FLAG_RT_PROCESS, params,

n_params);

audio/pwaudio.c line 455

Quoted 7 lines
audio/pwaudio.c new file +7 -0
+    if (res < 0) {
+        goto error;
+    }
+
+    return 0;
+error:
+    return res;

You can return directly instead.

Quoted 11 lines
audio/pwaudio.c new file +11 -0
+}
+
+static void
+pw_destroy(pwaudio *c)
+{
+    if (c->thread_loop) {
+        pw_thread_loop_stop(c->thread_loop);
+    }
+    if (c->core) {
+        pw_core_disconnect(c->core);
+    }

audio/pwaudio.c line 476

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+
+    g_free(c);
+}
+
+static int
+qpw_stream_new(pwaudio *c, PWVoice *v, const char *name)
+{
+    int r;
+
+    pw_thread_loop_lock(c->thread_loop);

You already have the lock when called.

Quoted 55 lines
audio/pwaudio.c new file +55 -0
+
+    switch (v->info.channels) {
+    case 8:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_LFE;
+        v->info.position[4] = SPA_AUDIO_CHANNEL_RL;
+        v->info.position[5] = SPA_AUDIO_CHANNEL_RR;
+        v->info.position[6] = SPA_AUDIO_CHANNEL_SL;
+        v->info.position[7] = SPA_AUDIO_CHANNEL_SR;
+        break;
+    case 6:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_LFE;
+        v->info.position[4] = SPA_AUDIO_CHANNEL_RL;
+        v->info.position[5] = SPA_AUDIO_CHANNEL_RR;
+        break;
+    case 5:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_LFE;
+        v->info.position[4] = SPA_AUDIO_CHANNEL_RC;
+        break;
+    case 4:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_FC;
+        v->info.position[3] = SPA_AUDIO_CHANNEL_RC;
+        break;
+    case 3:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        v->info.position[2] = SPA_AUDIO_CHANNEL_LFE;
+        break;
+    case 2:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_FL;
+        v->info.position[1] = SPA_AUDIO_CHANNEL_FR;
+        break;
+    case 1:
+        v->info.position[0] = SPA_AUDIO_CHANNEL_MONO;
+        break;
+    default:
+        for (size_t i = 0; i < v->info.channels; i++) {
+            v->info.position[i] = SPA_AUDIO_CHANNEL_UNKNOWN;
+        }
+        break;
+    }
+
+    /* create a new unconnected pwstream */
+    r = create_stream(c, v, name);
+    if (r < 0) {

audio/pwaudio.c line 541

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+        goto error;
+    }
+
+    pw_thread_loop_unlock(c->thread_loop);
+    return r;
+
+error:
+    AUD_log(AUDIO_CAP, "Failed to create stream.");
+    pw_thread_loop_unlock(c->thread_loop);
+    pw_destroy(c);

You are freeing c (and other data) on stream creation error. This will later crash during fini(), or other events, I guess.

There is a single "goto error", you could move it there.

Quoted 15 lines
audio/pwaudio.c new file +15 -0
+    return -1;
+}
+
+static int
+qpw_init_out(HWVoiceOut *hw, struct audsettings *as, void *drv_opaque)
+{
+    PWVoiceOut *pw = (PWVoiceOut *) hw;
+    PWVoice *v = &pw->v;
+    struct audsettings obt_as = *as;
+    pwaudio *c = v->g = drv_opaque;
+    AudiodevPipewireOptions *popts = &c->dev->u.pipewire;
+    AudiodevPipewirePerDirectionOptions *ppdo = popts->out;
+    int r;
+    v->enabled = false;
+

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    v->mode = MODE_SINK;
+
+    pw_thread_loop_lock(c->thread_loop);
+
+    v->info.format = audfmt_to_pw(as->fmt, as->endianness);
+    v->info.channels = as->nchannels;
+    v->info.rate = as->freq;
+
+    obt_as.fmt =
+        pw_to_audfmt(v->info.format, &obt_as.endianness,

&v->frame_size);

audio/pwaudio.c line 572

Quoted 6 lines
audio/pwaudio.c new file +6 -0
+    v->frame_size *= as->nchannels;
+
+    /* call the function that creates a new stream for playback */
+    r = qpw_stream_new(c, v, ppdo->stream_name ? : c->dev->id);
+    if (r < 0) {
+        pw_log_error("qpw_stream_new for playback failed\n ");

Use error_report() instead

Quoted 4 lines
audio/pwaudio.c new file +4 -0
+        goto fail;
+    }
+
+    /* report the audio format we support */

audio/pwaudio.c line 586

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    audio_pcm_init_info(&hw->info, &obt_as);
+
+    /* report the buffer size to qemu */
+    hw->samples = BUFFER_SAMPLES;
+
+    pw_thread_loop_unlock(c->thread_loop);
+    return 0;
+fail:
+    pw_thread_loop_unlock(c->thread_loop);
+    return -1;

There is a single "goto fail", you could move that here.

Quoted 13 lines
audio/pwaudio.c new file +13 -0
+}
+
+static int
+qpw_init_in(HWVoiceIn *hw, struct audsettings *as, void *drv_opaque)
+{
+    PWVoiceIn *pw = (PWVoiceIn *) hw;
+    PWVoice *v = &pw->v;
+    struct audsettings obt_as = *as;
+    pwaudio *c = v->g = drv_opaque;
+    AudiodevPipewireOptions *popts = &c->dev->u.pipewire;
+    AudiodevPipewirePerDirectionOptions *ppdo = popts->in;
+    int r;
+    v->enabled = false;

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+
+    v->mode = MODE_SOURCE;
+    pw_thread_loop_lock(c->thread_loop);
+
+    v->info.format = audfmt_to_pw(as->fmt, as->endianness);
+    v->info.channels = as->nchannels;
+    v->info.rate = as->freq;
+
+    obt_as.fmt =
+        pw_to_audfmt(v->info.format, &obt_as.endianness,

&v->frame_size);

audio/pwaudio.c line 615

Quoted 6 lines
audio/pwaudio.c new file +6 -0
+    v->frame_size *= as->nchannels;
+
+    /* call the function that creates a new stream for recording */
+    r = qpw_stream_new(c, v, ppdo->stream_name ? : c->dev->id);
+    if (r < 0) {
+        pw_log_error("qpw_stream_new for recording failed\n ");

Use error_report() instead

Quoted 4 lines
audio/pwaudio.c new file +4 -0
+        goto fail;
+    }
+
+    /* report the audio format we support */

audio/pwaudio.c line 586

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+    audio_pcm_init_info(&hw->info, &obt_as);
+
+    /* report the buffer size to qemu */
+    hw->samples = BUFFER_SAMPLES;
+
+    pw_thread_loop_unlock(c->thread_loop);
+    return 0;
+fail:
+    pw_thread_loop_unlock(c->thread_loop);
+    return -1;

There is a single "goto fail", you could move that here.

Quoted 40 lines
audio/pwaudio.c new file +40 -0
+}
+
+static void
+qpw_fini_out(HWVoiceOut *hw)
+{
+    PWVoiceOut *pw = (PWVoiceOut *) hw;
+    PWVoice *v = &pw->v;
+
+    if (v->stream) {
+        pwaudio *c = v->g;
+        pw_thread_loop_lock(c->thread_loop);
+        pw_stream_destroy(v->stream);
+        v->stream = NULL;
+        pw_thread_loop_unlock(c->thread_loop);
+    }
+}
+
+static void
+qpw_fini_in(HWVoiceIn *hw)
+{
+    PWVoiceIn *pw = (PWVoiceIn *) hw;
+    PWVoice *v = &pw->v;
+
+    if (v->stream) {
+        pwaudio *c = v->g;
+        pw_thread_loop_lock(c->thread_loop);
+        pw_stream_destroy(v->stream);
+        v->stream = NULL;
+        pw_thread_loop_unlock(c->thread_loop);
+    }
+}
+
+static void
+qpw_enable_out(HWVoiceOut *hw, bool enable)
+{
+    PWVoiceOut *po = (PWVoiceOut *) hw;
+    PWVoice *v = &po->v;
+    v->enabled = enable;
+}
+

audio/pwaudio.c

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+static void
+qpw_enable_in(HWVoiceIn *hw, bool enable)
+{
+    PWVoiceIn *pi = (PWVoiceIn *) hw;
+    PWVoice *v = &pi->v;
+    v->enabled = enable;
+}
+
+static void
+on_core_error(void *data, uint32_t id, int seq, int res, const char

*message)

audio/pwaudio.c line 684

Quoted 5 lines
audio/pwaudio.c new file +5 -0
+{
+    pwaudio *pw = data;
+
+    pw_log_warn("error id:%u seq:%d res:%d (%s): %s",
+                id, seq, res, spa_strerror(res), message);

Use error_report() instead

audio/pwaudio.c line 695

Quoted 11 lines
audio/pwaudio.c new file +11 -0
+
+    pw_thread_loop_signal(pw->thread_loop, FALSE);
+}
+
+static void
+on_core_done(void *data, uint32_t id, int seq)
+{
+    pwaudio *pw = data;
+    if (id == PW_ID_CORE) {
+        pw->seq = seq;
+        pw_thread_loop_signal(pw->thread_loop, FALSE);

What are those thread_loop_signal() for? Maybe leave a comment?

Quoted 8 lines
audio/pwaudio.c new file +8 -0
+    }
+}
+
+static const struct pw_core_events core_events = {
+    PW_VERSION_CORE_EVENTS,
+    .done = on_core_done,
+    .error = on_core_error,
+};

audio/pwaudio.c line 713

Quoted 10 lines
audio/pwaudio.c new file +10 -0
+
+static void *
+qpw_audio_init(Audiodev *dev)
+{
+    pwaudio *pw;
+    pw = g_new0(pwaudio, 1);
+    pw_init(NULL, NULL);
+
+    AudiodevPipewireOptions *popts;
+    pw_log_debug("Initialize PW context\n");

Can you replace the logging with traces? That's what QEMU uses.

audio/pwaudio.c line 726

Quoted 13 lines
audio/pwaudio.c new file +13 -0
+    assert(dev->driver == AUDIODEV_DRIVER_PIPEWIRE);
+    popts = &dev->u.pipewire;
+
+    if (!popts->has_latency) {
+        popts->has_latency = true;
+        popts->latency = 15000;
+    }
+
+    pw->dev = dev;
+    pw->thread_loop = pw_thread_loop_new("Pipewire thread loop", NULL);
+    if (pw->thread_loop == NULL) {
+        goto fail;
+    }

Either we handle allocation failures everywhere, or we don't. Unless the documentation is explicit about handling allocation/initialization errors, I would say we don't have to, in init/fini().

audio/pwaudio.c line 728

Quoted 2 lines
audio/pwaudio.c new file +2 -0
+    pw->context =
+        pw_context_new(pw_thread_loop_get_loop(pw->thread_loop), NULL,

0);

audio/pwaudio.c line 729

Quoted 1 line
audio/pwaudio.c new file +1 -0
+

Why not handle errors here?

audio/pwaudio.c

Quoted 12 lines
audio/pwaudio.c new file +12 -0
+    if (pw_thread_loop_start(pw->thread_loop) < 0) {
+        goto fail;
+    }
+
+    pw_thread_loop_lock(pw->thread_loop);
+
+    pw->core = pw_context_connect(pw->context, NULL, 0);
+    if (pw->core == NULL) {
+        goto fail;
+    }
+
+    pw_core_add_listener(pw->core, &pw->core_listener, &core_events,

pw);

audio/pwaudio.c line 749

Quoted 8 lines
audio/pwaudio.c new file +8 -0
+
+    pw_thread_loop_unlock(pw->thread_loop);
+
+    return pw;
+
+fail:
+    AUD_log(AUDIO_CAP, "Failed to initialize PW context");
+    pw_thread_loop_unlock(pw->thread_loop);

Bad after first "goto fail"

Quoted 67 lines
audio/pwaudio.c new file +62 -0
+    pw_context_destroy(pw->context);
+    pw_thread_loop_destroy(pw->thread_loop);
+    g_free(pw);
+    return NULL;
+}
+
+static void
+qpw_audio_fini(void *opaque)
+{
+    pwaudio *pw = opaque;
+
+    pw_thread_loop_stop(pw->thread_loop);
+
+    if (pw->core) {
+        spa_hook_remove(&pw->core_listener);
+        spa_zero(pw->core_listener);
+        pw_core_disconnect(pw->core);
+    }
+
+    if (pw->context) {
+        pw_context_destroy(pw->context);
+    }
+    pw_thread_loop_destroy(pw->thread_loop);
+
+    g_free(pw);
+}
+
+static struct audio_pcm_ops qpw_pcm_ops = {
+    .init_out = qpw_init_out,
+    .fini_out = qpw_fini_out,
+    .write = qpw_write,
+    .buffer_get_free = audio_generic_buffer_get_free,
+    .run_buffer_out = audio_generic_run_buffer_out,
+    .enable_out = qpw_enable_out,
+
+    .init_in = qpw_init_in,
+    .fini_in = qpw_fini_in,
+    .read = qpw_read,
+    .run_buffer_in = audio_generic_run_buffer_in,
+    .enable_in = qpw_enable_in
+};
+
+static struct audio_driver pw_audio_driver = {
+    .name = "pipewire",
+    .descr = "http://www.pipewire.org/",
+    .init = qpw_audio_init,
+    .fini = qpw_audio_fini,
+    .pcm_ops = &qpw_pcm_ops,
+    .can_be_default = 1,
+    .max_voices_out = INT_MAX,
+    .max_voices_in = INT_MAX,
+    .voice_size_out = sizeof(PWVoiceOut),
+    .voice_size_in = sizeof(PWVoiceIn),
+};
+
+static void
+register_audio_pw(void)
+{
+    audio_driver_register(&pw_audio_driver);
+}
+
+type_init(register_audio_pw);
meson.build +0 -0
index 6cb2b1a42f..2aa0b397ea 100644

meson.build if not get_option('jack').auto() or have_system · line 734

Quoted 5 lines
meson.build +2 -0
@@ -730,6 +730,12 @@ if not get_option('jack').auto() or have_system
   jack = dependency('jack', required: get_option('jack'),
                     method: 'pkg-config', kwargs: static_kwargs)
 endif
+pipewire = not_found
+if not get_option('pipewire').auto() or (targetos == 'linux' and

have_system)

meson_options.txt option('tls_priority', type : 'string', value :

Quoted 28 lines
meson.build +6 -0
+  pipewire = dependency('libpipewire-0.3', version: '>=0.3.60',
+                    required: get_option('pipewire'),
+                    method: 'pkg-config', kwargs: static_kwargs)
+endif
 sndio = not_found
 if not get_option('sndio').auto() or have_system
   sndio = dependency('sndio', required: get_option('sndio'),
@@ -1667,6 +1673,7 @@ if have_system
     'jack': jack.found(),
     'oss': oss.found(),
     'pa': pulse.found(),
+    'pipewire': pipewire.found(),
     'sdl': sdl.found(),
     'sndio': sndio.found(),
   }
@@ -3978,6 +3985,7 @@ if targetos == 'linux'
   summary_info += {'ALSA support':    alsa}
   summary_info += {'PulseAudio support': pulse}
 endif
+summary_info += {'Pipewire support':   pipewire}
 summary_info += {'JACK support':      jack}
 summary_info += {'brlapi support':    brlapi}
 summary_info += {'vde support':       vde}
meson_options.txt +0 -0
index 6b0900205e..6c5f260a6a 100644
@@ -21,7 +21,7 @@ option('tls_priority', type : 'string', value :

'NORMAL',

meson_options.txt option('tls_priority', type : 'string', value : · line 22

Quoted 2 lines
meson_options.txt +0 -0
 option('default_devices', type : 'boolean', value : true,
        description: 'Include a default selection of devices in

emulators')

meson_options.txt option('tls_priority', type : 'string', value : · line 24

Quoted 2 lines
meson_options.txt +0 -1
 option('audio_drv_list', type: 'array', value: ['default'],
-       choices: ['alsa', 'coreaudio', 'default', 'dsound', 'jack',

'oss', 'pa', 'sdl', 'sndio'],

meson_options.txt option('tls_priority', type : 'string', value : · line 24

Quoted 1 line
meson_options.txt +1 -0
+       choices: ['alsa', 'coreaudio', 'default', 'dsound', 'jack',

'oss', 'pa', 'pipewire', 'sdl', 'sndio'],

meson_options.txt option('tls_priority', type : 'string', value : 'NORMAL',

Quoted 3 lines
meson_options.txt +0 -0
        description: 'Set audio driver list')
 option('block_drv_rw_whitelist', type : 'string', value : '',
        description: 'set block driver read-write whitelist (by default

affects only QEMU, not tools like qemu-img)')

Review

Quoted 115 lines
meson_options.txt +2 -0
@@ -255,6 +255,8 @@ option('oss', type: 'feature', value: 'auto',
        description: 'OSS sound support')
 option('pa', type: 'feature', value: 'auto',
        description: 'PulseAudio sound support')
+option('pipewire', type: 'feature', value: 'auto',
+       description: 'Pipewire sound support')
 option('sndio', type: 'feature', value: 'auto',
        description: 'sndio sound support')
 
qapi/audio.json +45 -0
index 4e54c00f51..9a0d7d9ece 100644
@@ -324,6 +324,48 @@
     '*out':    'AudiodevPaPerDirectionOptions',
     '*server': 'str' } }
 
+##
+# @AudiodevPipewirePerDirectionOptions:
+#
+# Options of the Pipewire backend that are used for both playback and
+# recording.
+#
+# @name: name of the sink/source to use
+#
+# @stream-name: name of the Pipewire stream created by qemu.  Can be
+#               used to identify the stream in Pipewire when you
+#               create multiple Pipewire devices or run multiple qemu
+#               instances (default: audiodev's id, since 7.1)
+#
+#
+# Since: 8.0
+##
+{ 'struct': 'AudiodevPipewirePerDirectionOptions',
+  'base': 'AudiodevPerDirectionOptions',
+  'data': {
+    '*name': 'str',
+    '*stream-name': 'str' } }
+
+##
+# @AudiodevPipewireOptions:
+#
+# Options of the Pipewire audio backend.
+#
+# @in: options of the capture stream
+#
+# @out: options of the playback stream
+#
+# @latency: add latency to playback in microseconds
+#           (default 15000)
+#
+# Since: 8.0
+##
+{ 'struct': 'AudiodevPipewireOptions',
+  'data': {
+    '*in':     'AudiodevPipewirePerDirectionOptions',
+    '*out':    'AudiodevPipewirePerDirectionOptions',
+    '*latency': 'uint32' } }
+
 ##
 # @AudiodevSdlPerDirectionOptions:
 #
@@ -416,6 +458,7 @@
             { 'name': 'jack', 'if': 'CONFIG_AUDIO_JACK' },
             { 'name': 'oss', 'if': 'CONFIG_AUDIO_OSS' },
             { 'name': 'pa', 'if': 'CONFIG_AUDIO_PA' },
+            { 'name': 'pipewire', 'if': 'CONFIG_AUDIO_PIPEWIRE' },
             { 'name': 'sdl', 'if': 'CONFIG_AUDIO_SDL' },
             { 'name': 'sndio', 'if': 'CONFIG_AUDIO_SNDIO' },
             { 'name': 'spice', 'if': 'CONFIG_SPICE' },
@@ -456,6 +499,8 @@
                    'if': 'CONFIG_AUDIO_OSS' },
     'pa':        { 'type': 'AudiodevPaOptions',
                    'if': 'CONFIG_AUDIO_PA' },
+    'pipewire':  { 'type': 'AudiodevPipewireOptions',
+                   'if': 'CONFIG_AUDIO_PIPEWIRE' },
     'sdl':       { 'type': 'AudiodevSdlOptions',
                    'if': 'CONFIG_AUDIO_SDL' },
     'sndio':     { 'type': 'AudiodevSndioOptions',
qemu-options.hx +17 -0
index beeb4475ba..2fd88ccf15 100644
@@ -779,6 +779,11 @@ DEF("audiodev", HAS_ARG, QEMU_OPTION_audiodev,
     "                in|out.name= source/sink device name\n"
     "                in|out.latency= desired latency in microseconds\n"
 #endif
+#ifdef CONFIG_AUDIO_PIPEWIRE
+    "-audiodev pipewire,id=id[,prop[=value][,...]]\n"
+    "                in|out.name= source/sink device name\n"
+    "                latency= desired latency in microseconds\n"
+#endif
 #ifdef CONFIG_AUDIO_SDL
     "-audiodev sdl,id=id[,prop[=value][,...]]\n"
     "                in|out.buffer-count= number of buffers\n"
@@ -942,6 +947,18 @@ SRST
         Desired latency in microseconds. The PulseAudio server will try
         to honor this value but actual latencies may be lower or higher.
 
+``-audiodev pipewire,id=id[,prop[=value][,...]]``
+    Creates a backend using Pipewire. This backend is available on
+    most systems.
+
+    Pipewire specific options are:
+
+    ``latency=latency``
+        Add extra latency to playback in microseconds
+
+    ``in|out.name=sink``
+        Use the specified source/sink for recording/playback.
+
 ``-audiodev sdl,id=id[,prop[=value][,...]]``
     Creates a backend using SDL. This backend is available on most
     systems, but you should use your platform's native backend if
(quoted diff) +0 -0

b/scripts/meson-buildoptions.sh

scripts/meson-buildoptions.sh line 3

Quoted 7 lines

index 5d969a94c0..236a714087 100644

scripts/meson-buildoptions.sh +0 -1
@@ -1,7 +1,8 @@
 # This file is generated by meson-buildoptions.py, do not edit!
 meson_options_help() {
-  printf "%s\n" '  --audio-drv-list=CHOICES Set audio driver list

[default] (choices: alsa/co'

scripts/meson-buildoptions.sh line 4

Quoted 1 line
scripts/meson-buildoptions.sh +0 -1
-  printf "%s\n" '

reaudio/default/dsound/jack/oss/pa/sdl/sndio)'

scripts/meson-buildoptions.sh line 3

Quoted 1 line
scripts/meson-buildoptions.sh +1 -0
+  printf "%s\n" '  --audio-drv-list=CHOICES Set audio driver list

[default] (choices: al'

scripts/meson-buildoptions.sh line 4

Quoted 1 line
scripts/meson-buildoptions.sh +1 -0
+  printf "%s\n" '

sa/coreaudio/default/dsound/jack/oss/pa/'

scripts/meson-buildoptions.sh

Quoted 3 lines
scripts/meson-buildoptions.sh +1 -0
+  printf "%s\n" '                           pipewire/sdl/sndio)'
   printf "%s\n" '  --block-drv-ro-whitelist=VALUE'
   printf "%s\n" '                           set block driver read-only

whitelist (by default'

scripts/meson-buildoptions.sh line 8

Quoted 1 line
scripts/meson-buildoptions.sh +0 -0
   printf "%s\n" '                           affects only QEMU, not

tools like qemu-img)'

Quoted 18 lines
scripts/meson-buildoptions.sh +3 -1
@@ -135,6 +136,7 @@ meson_options_help() {
   printf "%s\n" '  oss             OSS sound support'
   printf "%s\n" '  pa              PulseAudio sound support'
   printf "%s\n" '  parallels       parallels image format support'
+  printf "%s\n" '  pipewire        Pipewire sound support'
   printf "%s\n" '  png             PNG support with libpng'
   printf "%s\n" '  pvrdma          Enable PVRDMA support'
   printf "%s\n" '  qcow1           qcow1 image format support'
@@ -369,6 +371,8 @@ _meson_option_parse() {
     --disable-pa) printf "%s" -Dpa=disabled ;;
     --enable-parallels) printf "%s" -Dparallels=enabled ;;
     --disable-parallels) printf "%s" -Dparallels=disabled ;;
+    --enable-pipewire) printf "%s" -Dpipewire=enabled ;;
+    --disable-pipewire) printf "%s" -Dpipewire=disabled ;;
     --with-pkgversion=*) quote_sh "-Dpkgversion=$2" ;;
     --enable-png) printf "%s" -Dpng=enabled ;;
     --disable-png) printf "%s" -Dpng=disabled ;;
--
Quoted 3 lines

2.39.1

--
Marc-André Lureau

#3 lore raw

Hi

On Fri, Mar 3, 2023 at 8:06 PM Dorinda Bassey

Quoted 4 lines
Quoted 1 line

What are those thread_loop_signal() for? Maybe leave a comment?

the explanation of the function is in the reference header file.

Yes, I read the reference documentation before asking: "Signal all threads waiting with pw_thread_loop_wait."
(https://docs.pipewire.org/group__pw__thread__loop.html#gaf9bc8dd348d05b095139f5a55ac5a4b0)

Unfortunately, you are not calling pw_thread_loop_wait yourself, so that doesn't help me what this is supposed to do. When signaling things and expecting a certain state and side-effect from a different thread or context, it's nice to document it.

I guess this will break the thread loop? What happens next?

thanks

Signature · 1 line
Marc-André Lureau
#4 lore raw

Hi

Unfortunately, you are not calling pw_thread_loop_wait yourself, so

Quoted 6 lines

that doesn't help me what this is supposed to do. When signaling things and expecting a certain state and side-effect from a different thread or context, it's nice to document it.

I guess this will break the thread loop? What happens next?

In this case When the on_core_done event is received for an object with id PW_ID_CORE this function would call the thread_loop_signal(loop, FALSE) to stop and exit the thread loop. I would add a comment for this, to be clear.

Thanks,
Dorinda.

Quoted 27 lines · Marc-André Lureau

Hi

On Fri, Mar 3, 2023 at 8:06 PM Dorinda Bassey

Quoted 4 lines
Quoted 1 line

What are those thread_loop_signal() for? Maybe leave a comment?

the explanation of the function is in the reference header file.

Yes, I read the reference documentation before asking: "Signal all threads waiting with pw_thread_loop_wait."
(
https://docs.pipewire.org/group__pw__thread__loop.html#gaf9bc8dd348d05b095139f5a55ac5a4b0
)

Unfortunately, you are not calling pw_thread_loop_wait yourself, so that doesn't help me what this is supposed to do. When signaling things and expecting a certain state and side-effect from a different thread or context, it's nice to document it.

I guess this will break the thread loop? What happens next?

thanks

--
Marc-André Lureau