ACPI: x86: Add Cezanne to the list for forcing StorageD3Enable
PATCH v2 1/1 ACPI: x86: Add Cezanne to the list for forcing StorageD3Enable
commit 018d6711c26e4 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable") introduced a quirk to allow a system with ambiguous use of _ADR 0 to force StorageD3Enable.
It was reported that several more Dell systems suffered the same symptoms. As the list is continuing to grow but these are all Cezanne systems, instead add Cezanne to the CPU list to apply the StorageD3Enable property and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI device for the first NVME disk, not the second.
---v1->v2:
* Switch to using CPU rather than an ever growing list
drivers/acpi/x86/utils.c | 37 +++++++++++++------------------------ 1 file changed, 13 insertions(+), 24 deletions(-)
drivers/acpi/x86/utils.c +13 -24
@@ -200,39 +200,28 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s* a hardcoded allowlist for D3 support, which was used for these platforms. * * This allows quirking on Linux in a similar fashion. +* +* Cezanne systems shouldn't *normally* need this as the BIOS includes +* StorageD3Enable. But for two reasons we have added it. +* 1) The BIOS on a number of Dell systems have ambiguity +* between the same value used for _ADR on ACPI nodes GPP1.DEV0 and GPP1.NVME. +* GPP1.NVME is needed to get StorageD3Enable node set properly. +* https://bugzilla.kernel.org/show_bug.cgi?id=216440 +* https://bugzilla.kernel.org/show_bug.cgi?id=216773 +* https://bugzilla.kernel.org/show_bug.cgi?id=217003 +* 2) On at least one HP system StorageD3Enable is missing on the second NVME +disk in the system. */ static const struct x86_cpu_id storage_d3_cpu_ids[] = {X86_MATCH_VENDOR_FAM_MODEL (AMD ,23 ,96 ,NULL ),/* Renoir */ X86_MATCH_VENDOR_FAM_MODEL (AMD ,23 ,104 ,NULL ),/* Lucienne */ - {} -}; - -static const struct dmi_system_id force_storage_d3_dmi[] = { - { -/* -* _ADR is ambiguous between GPP1.DEV0 and GPP1.NVME -* but .NVME is needed to get StorageD3Enable node -* https://bugzilla.kernel.org/show_bug.cgi?id=216440 -*/ - .matches = { -DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), -DMI_MATCH (DMI_PRODUCT_NAME ,"Inspiron 14 7425 2-in-1" ), - } - }, - { - .matches = { -DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), -DMI_MATCH (DMI_PRODUCT_NAME ,"Inspiron 16 5625" ), - } - }, +X86_MATCH_VENDOR_FAM_MODEL (AMD ,25 ,80 ,NULL ),/* Cezanne */ {} };bool force_storage_d3 (void ) { -const struct dmi_system_id *dmi_id =dmi_first_match (force_storage_d3_dmi); - -return dmi_id ||x86_match_cpu (storage_d3_cpu_ids); +return x86_match_cpu (storage_d3_cpu_ids); }/*
Signature · 1 line
2.34.1
Quoted 76 lines · Mario Limonciello
commit
018d6711c26e4("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable") introduced a quirk to allow a system with ambiguous use of_ADR0 to force StorageD3Enable.It was reported that several more Dell systems suffered the same symptoms. As the list is continuing to grow but these are all Cezanne systems, instead add Cezanne to the CPU list to apply the StorageD3Enable property and remove the whole list.
It was also reported that an HP system only has StorageD3Enable on the ACPI device for the first NVME disk, not the second.
Reported-by David Alvarez Lombardi <[email protected]>Reported-by [email protected]Reported-and-tested-by Elvis Angelaccio <[email protected]>Tested-by [email protected]Tested-by [email protected]Signed-off-by Mario Limonciello <[email protected]>---
v1->v2:
* Switch to using CPU rather than an ever growing listdrivers/acpi/x86/utils.c | 37 +++++++++++++------------------------ 1 file changed, 13 insertions(+), 24 deletions(-)drivers/acpi/x86/utils.c +12
-21@@ -200,39 +200,28 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s* a hardcoded allowlist for D3 support, which was used for these platforms. * * This allows quirking on Linux in a similar fashion. +* +* Cezanne systems shouldn't *normally* need this as the BIOS includes +* StorageD3Enable. But for two reasons we have added it. +* 1) The BIOS on a number of Dell systems have ambiguity +* between the same value used for _ADR on ACPI nodes GPP1.DEV0 and GPP1.NVME. +* GPP1.NVME is needed to get StorageD3Enable node set properly. +* https://bugzilla.kernel.org/show_bug.cgi?id=216440 +* https://bugzilla.kernel.org/show_bug.cgi?id=216773 +* https://bugzilla.kernel.org/show_bug.cgi?id=217003 +* 2) On at least one HP system StorageD3Enable is missing on the second NVME +disk in the system. */ static const struct x86_cpu_id storage_d3_cpu_ids[] = {X86_MATCH_VENDOR_FAM_MODEL (AMD ,23 ,96 ,NULL ),/* Renoir */ X86_MATCH_VENDOR_FAM_MODEL (AMD ,23 ,104 ,NULL ),/* Lucienne */ - {} -}; - -static const struct dmi_system_id force_storage_d3_dmi[] = { - { -/* -* _ADR is ambiguous between GPP1.DEV0 and GPP1.NVME -* but .NVME is needed to get StorageD3Enable node -* https://bugzilla.kernel.org/show_bug.cgi?id=216440 -*/ - .matches = { -DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), -DMI_MATCH (DMI_PRODUCT_NAME ,"Inspiron 14 7425 2-in-1" ), - } - }, - { - .matches = { -DMI_MATCH (DMI_SYS_VENDOR ,"Dell Inc." ), -DMI_MATCH (DMI_PRODUCT_NAME ,"Inspiron 16 5625" ), - } - }, +X86_MATCH_VENDOR_FAM_MODEL (AMD ,25 ,80 ,NULL ),/* Cezanne */ {} };
drivers/acpi/x86/utils.c bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
Quoted 10 lines
drivers/acpi/x86/utils.c +1
-4bool force_storage_d3 (void ) { -const struct dmi_system_id *dmi_id =dmi_first_match (force_storage_d3_dmi); - -return dmi_id ||x86_match_cpu (storage_d3_cpu_ids); +return x86_match_cpu (storage_d3_cpu_ids); }/* --
Applied as 6.3-rc material, thanks!