Skip to contentSkip to conversation

ARM: dts: rockchip: rk3588-rock-5b-u-boot: add USB 2.0 host

PATCH Superseded Eugen Hristev 2 participants 4 messages Mar 9, 2023 – Mar 10, 2023

Subsystems (3)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/3 ARM: dts: rockchip: rk3588-rock-5b-u-boot: add USB 2.0 host

Add USB 2.0 host nodes and PHYs.

---
 arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 169 ++++++++++++++++++++++++
 1 file changed, 169 insertions(+)
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi +169 -0
index 2386edf90deb..e1d240baf35d 100644
@@ -4,6 +4,9 @@
  */
 
 #include "rk3588-u-boot.dtsi"
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
@@ -13,6 +16,105 @@
 	chosen {
 		u-boot,spl-boot-order = &sdmmc;
 	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		u-boot,dm-pre-reloc;
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	usb_host0_ehci: usb@fc800000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfc800000 0x0 0x40000>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>;
+		clock-names = "usbhost", "arbiter";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fc840000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfc840000 0x0 0x40000>;
+		interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>;
+		clock-names = "usbhost", "arbiter";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fc880000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfc880000 0x0 0x40000>;
+		interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>;
+		clock-names = "usbhost", "arbiter";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fc8c0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfc8c0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>;
+		clock-names = "usbhost", "arbiter";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb2phy2_grf: syscon@fd5d8000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xfd5d8000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy2: usb2-phy@8000 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0x8000 0x10>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy2_host: host-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usb2phy3_grf: syscon@fd5dc000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xfd5dc000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy3: usb2-phy@c000 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0xc000 0x10>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy3_host: host-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
 };
 
 &sdmmc {
@@ -20,3 +122,70 @@
 	u-boot,dm-spl;
 	status = "okay";
 };
+
+&pinctrl {
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usb_host0_ehci {
+	companion = <&usb_host0_ohci>;
+	phys = <&u2phy2_host>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	phys = <&u2phy2_host>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb2phy2_grf {
+	status = "okay";
+};
+
+&u2phy2 {
+	resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
+	reset-names = "phy", "apb";
+	clock-output-names = "usb480m_phy2";
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	companion = <&usb_host1_ohci>;
+	phys = <&u2phy3_host>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	phys = <&u2phy3_host>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb2phy3_grf {
+	status = "okay";
+};
+
+&u2phy3 {
+	resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
+	reset-names = "phy", "apb";
+	clock-output-names = "usb480m_phy3";
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 2/3 phy: rockchip-inno-usb2: add initial support for rk3588 PHY

Add initial support for the rk3588 PHY variant.
The driver now looks for phy-supply and enables/disables the vbus accordingly.
The lookup for the host-port reg inside the struct now does a do {} while() instead of a while() {} in order to allow a first check for reg == 0.

---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 109 +++++++++++++++++-
 1 file changed, 104 insertions(+), 5 deletions(-)
drivers/phy/rockchip/phy-rockchip-inno-usb2.c +104 -5
index 55e1dbcfef7e..1221c597eac1 100644
@@ -13,6 +13,7 @@
 #include <dm/device_compat.h>
 #include <dm/lists.h>
 #include <generic-phy.h>
+#include <power/regulator.h>
 #include <reset.h>
 #include <syscon.h>
 #include <asm/gpio.h>
@@ -61,6 +62,7 @@ struct rockchip_usb2phy_cfg {
 struct rockchip_usb2phy {
 	void *reg_base;
 	struct clk phyclk;
+	struct udevice *vbus_supply[USB2PHY_NUM_PORTS];
 	const struct rockchip_usb2phy_cfg *phy_cfg;
 };
 
@@ -86,11 +88,34 @@ struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy)
 	return &phy_cfg->port_cfgs[phy->id];
 }
 
+static struct udevice *rockchip_usb2phy_check_vbus(struct phy *phy)
+{
+	struct udevice *parent = phy->dev->parent;
+	struct rockchip_usb2phy *priv = dev_get_priv(parent);
+	struct udevice *vbus = NULL;
+
+	if (phy->id == USB2PHY_PORT_HOST)
+		vbus = priv->vbus_supply[USB2PHY_PORT_HOST];
+
+	return vbus;
+}
+
 static int rockchip_usb2phy_power_on(struct phy *phy)
 {
 	struct udevice *parent = dev_get_parent(phy->dev);
 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+	struct udevice *vbus = NULL;
+	int ret;
+
+	vbus = rockchip_usb2phy_check_vbus(phy);
+	if (vbus) {
+		ret = regulator_set_enable(vbus, true);
+		if (ret) {
+			dev_err(phy->dev, "vbus enable failed: %d\n", ret);
+			return ret;
+		}
+	}
 
 	property_enable(priv->reg_base, &port_cfg->phy_sus, false);
 
@@ -105,6 +130,17 @@ static int rockchip_usb2phy_power_off(struct phy *phy)
 	struct udevice *parent = dev_get_parent(phy->dev);
 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+	struct udevice *vbus = NULL;
+	int ret;
+
+	vbus = rockchip_usb2phy_check_vbus(phy);
+	if (vbus) {
+		ret = regulator_set_enable(vbus, false);
+		if (ret && ret != -EACCES) {
+			dev_info(phy->dev, "vbus disable failed: %d\n", ret);
+			return ret;
+		}
+	}
 
 	property_enable(priv->reg_base, &port_cfg->phy_sus, true);
 
@@ -149,13 +185,20 @@ static int rockchip_usb2phy_of_xlate(struct phy *phy,
 				     struct ofnode_phandle_args *args)
 {
 	const char *name = phy->dev->name;
+	struct udevice *parent = phy->dev->parent;
+	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 
-	if (!strcasecmp(name, "host-port"))
+	if (!strcasecmp(name, "host-port")) {
 		phy->id = USB2PHY_PORT_HOST;
-	else if (!strcasecmp(name, "otg-port"))
+		device_get_supply_regulator(phy->dev, "phy-supply",
+					    &priv->vbus_supply[USB2PHY_PORT_HOST]);
+	} else if (!strcasecmp(name, "otg-port")) {
 		phy->id = USB2PHY_PORT_OTG;
-	else
+		device_get_supply_regulator(phy->dev, "phy-supply",
+					    &priv->vbus_supply[USB2PHY_PORT_OTG]);
+	} else {
 		dev_err(phy->dev, "improper %s device\n", name);
+	}
 
 	return 0;
 }
@@ -201,14 +244,14 @@ static int rockchip_usb2phy_probe(struct udevice *dev)
 
 	/* find out a proper config which can be matched with dt. */
 	index = 0;
-	while (phy_cfgs[index].reg) {
+	do {
 		if (phy_cfgs[index].reg == reg) {
 			priv->phy_cfg = &phy_cfgs[index];
 			break;
 		}
 
 		++index;
-	}
+	} while (phy_cfgs[index].reg);
 
 	if (!priv->phy_cfg) {
 		dev_err(dev, "failed find proper phy-cfg\n");
@@ -348,6 +391,58 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
+	{
+		.reg		= 0x0000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0x4000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 0 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0x8000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0xc000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct udevice_id rockchip_usb2phy_ids[] = {
 	{
 		.compatible = "rockchip,rk3399-usb2phy",
@@ -357,6 +452,10 @@ static const struct udevice_id rockchip_usb2phy_ids[] = {
 		.compatible = "rockchip,rk3568-usb2phy",
 		.data = (ulong)&rk3568_phy_cfgs,
 	},
+	{
+		.compatible = "rockchip,rk3588-usb2phy",
+		.data = (ulong)&rk3588_phy_cfgs,
+	},
 	{ /* sentinel */ }
 };
 
Signature · 1 line
2.34.1
Tested-by on v2 2/3
#2 lore raw

Re: [PATCH v2 2/3] phy: rockchip-inno-usb2: add initial support for rk3588 PHY

El Thu, Mar 09, 2023 at 02:23:11PM +0200, Eugen Hristev deia:

Quoted 10 lines

Add initial support for the rk3588 PHY variant.
The driver now looks for phy-supply and enables/disables the vbus accordingly.
The lookup for the host-port reg inside the struct now does a do {} while() instead of a while() {} in order to allow a first check for reg == 0.

I tested both with and without my patch[1] to enable ehci and this v2 doesn't break usb reset anymore.

[1] https://lists.denx.de/pipermail/u-boot/2023-February/510672.html

Quoted 191 lines
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 109 +++++++++++++++++-
 1 file changed, 104 insertions(+), 5 deletions(-)
drivers/phy/rockchip/phy-rockchip-inno-usb2.c +104 -5
index 55e1dbcfef7e..1221c597eac1 100644
@@ -13,6 +13,7 @@
 #include <dm/device_compat.h>
 #include <dm/lists.h>
 #include <generic-phy.h>
+#include <power/regulator.h>
 #include <reset.h>
 #include <syscon.h>
 #include <asm/gpio.h>
@@ -61,6 +62,7 @@ struct rockchip_usb2phy_cfg {
 struct rockchip_usb2phy {
 	void *reg_base;
 	struct clk phyclk;
+	struct udevice *vbus_supply[USB2PHY_NUM_PORTS];
 	const struct rockchip_usb2phy_cfg *phy_cfg;
 };
 
@@ -86,11 +88,34 @@ struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy)
 	return &phy_cfg->port_cfgs[phy->id];
 }
 
+static struct udevice *rockchip_usb2phy_check_vbus(struct phy *phy)
+{
+	struct udevice *parent = phy->dev->parent;
+	struct rockchip_usb2phy *priv = dev_get_priv(parent);
+	struct udevice *vbus = NULL;
+
+	if (phy->id == USB2PHY_PORT_HOST)
+		vbus = priv->vbus_supply[USB2PHY_PORT_HOST];
+
+	return vbus;
+}
+
 static int rockchip_usb2phy_power_on(struct phy *phy)
 {
 	struct udevice *parent = dev_get_parent(phy->dev);
 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+	struct udevice *vbus = NULL;
+	int ret;
+
+	vbus = rockchip_usb2phy_check_vbus(phy);
+	if (vbus) {
+		ret = regulator_set_enable(vbus, true);
+		if (ret) {
+			dev_err(phy->dev, "vbus enable failed: %d\n", ret);
+			return ret;
+		}
+	}
 
 	property_enable(priv->reg_base, &port_cfg->phy_sus, false);
 
@@ -105,6 +130,17 @@ static int rockchip_usb2phy_power_off(struct phy *phy)
 	struct udevice *parent = dev_get_parent(phy->dev);
 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+	struct udevice *vbus = NULL;
+	int ret;
+
+	vbus = rockchip_usb2phy_check_vbus(phy);
+	if (vbus) {
+		ret = regulator_set_enable(vbus, false);
+		if (ret && ret != -EACCES) {
+			dev_info(phy->dev, "vbus disable failed: %d\n", ret);
+			return ret;
+		}
+	}
 
 	property_enable(priv->reg_base, &port_cfg->phy_sus, true);
 
@@ -149,13 +185,20 @@ static int rockchip_usb2phy_of_xlate(struct phy *phy,
 				     struct ofnode_phandle_args *args)
 {
 	const char *name = phy->dev->name;
+	struct udevice *parent = phy->dev->parent;
+	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 
-	if (!strcasecmp(name, "host-port"))
+	if (!strcasecmp(name, "host-port")) {
 		phy->id = USB2PHY_PORT_HOST;
-	else if (!strcasecmp(name, "otg-port"))
+		device_get_supply_regulator(phy->dev, "phy-supply",
+					    &priv->vbus_supply[USB2PHY_PORT_HOST]);
+	} else if (!strcasecmp(name, "otg-port")) {
 		phy->id = USB2PHY_PORT_OTG;
-	else
+		device_get_supply_regulator(phy->dev, "phy-supply",
+					    &priv->vbus_supply[USB2PHY_PORT_OTG]);
+	} else {
 		dev_err(phy->dev, "improper %s device\n", name);
+	}
 
 	return 0;
 }
@@ -201,14 +244,14 @@ static int rockchip_usb2phy_probe(struct udevice *dev)
 
 	/* find out a proper config which can be matched with dt. */
 	index = 0;
-	while (phy_cfgs[index].reg) {
+	do {
 		if (phy_cfgs[index].reg == reg) {
 			priv->phy_cfg = &phy_cfgs[index];
 			break;
 		}
 
 		++index;
-	}
+	} while (phy_cfgs[index].reg);
 
 	if (!priv->phy_cfg) {
 		dev_err(dev, "failed find proper phy-cfg\n");
@@ -348,6 +391,58 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
+	{
+		.reg		= 0x0000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0x4000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 0 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0x8000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0xc000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct udevice_id rockchip_usb2phy_ids[] = {
 	{
 		.compatible = "rockchip,rk3399-usb2phy",
@@ -357,6 +452,10 @@ static const struct udevice_id rockchip_usb2phy_ids[] = {
 		.compatible = "rockchip,rk3568-usb2phy",
 		.data = (ulong)&rk3568_phy_cfgs,
 	},
+	{
+		.compatible = "rockchip,rk3588-usb2phy",
+		.data = (ulong)&rk3588_phy_cfgs,
+	},
 	{ /* sentinel */ }
 };
 
Signature · 1 line
2.34.1
#3 lore raw

PATCH v2 3/3 configs: rockchip: rock5b-rk3588: enable USB and regulators

In reply to Eugen Hristev

Enable USB command, USB drivers, PHY and regulators, for USB host operations.

---
 configs/rock5b-rk3588_defconfig | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
configs/rock5b-rk3588_defconfig +17 -1
index 66199387195a..ed63db1e297b 100644
@@ -41,12 +41,13 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
 CONFIG_SPL_CLK=y
@@ -61,11 +62,26 @@ CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_SPL_RAM=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_LAN75XX=y
+CONFIG_USB_ETHER_LAN78XX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_ERRNO_STR=y
Signature · 1 line
2.34.1