Skip to contentSkip to conversation

arm: imx: add u-boot-nand.imx to boot from NAND without SPL

PATCH New Luca Ceresoli 2 participants 2 messages Mar 10, 2023 – Apr 4, 2023

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: imx: add u-boot-nand.imx to boot from NAND without SPL

U-Boot can be booted from NAND without SPL by prepending the DCD header to the actual U-Boot binary. However this requires prepending 1024 bytes to u-boot.imx (DCD + u-boot.bin).

There is already a similar target to build spl/u-boot-nand-spl.imx, add the same option for no-SPL boot.

Tested on i.MX6ULL.

The resulting layout of u-boot-nand.imx is:

- Offset 0x0000 (0 KiB): padding
- Offset 0x0400 (1 KiB): DCD header
- Offset 0x1000 (4 KiB): u-boot.bin

---
 Makefile                   | 3 +++
 arch/arm/mach-imx/Makefile | 6 ++++++
 2 files changed, 9 insertions(+)
Makefile +3 -0
index e760bacf9451..db124476d6e6 100644
@@ -1522,6 +1522,9 @@ endif
 u-boot.uim: u-boot.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
+u-boot-nand.imx: u-boot.imx FORCE
+	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+
 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL $(if $(CONFIG_OF_SEPARATE),u-boot.img,u-boot.uim) FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
arch/arm/mach-imx/Makefile +6 -0
index 4dfc60eedc43..c386132dacd1 100644
@@ -132,6 +132,12 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
 u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)
 
+quiet_cmd_u-boot-nand_imx = GEN     $@
+cmd_u-boot-nand_imx = (dd bs=1024 count=1 if=/dev/zero 2>/dev/null) | cat - $< > $@
+
+u-boot-nand.imx: u-boot.imx FORCE
+	$(call if_changed,u-boot-nand_imx)
+
 ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \
 	-T $(IMAGE_TYPE) -e $(CONFIG_TEXT_BASE)
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/1 arm: imx: add u-boot-nand.imx to boot from NAND without SPL

Quoted 11 lines

U-Boot can be booted from NAND without SPL by prepending the DCD header to the actual U-Boot binary. However this requires prepending 1024 bytes to u-boot.imx (DCD + u-boot.bin).
There is already a similar target to build spl/u-boot-nand-spl.imx, add the same option for no-SPL boot.
Tested on i.MX6ULL.
The resulting layout of u-boot-nand.imx is:
- Offset 0x0000 (0 KiB): padding
- Offset 0x0400 (1 KiB): DCD header
- Offset 0x1000 (4 KiB): u-boot.bin

Applied to u-boot-imx, next, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================