Skip to contentSkip to conversation

media: ipu3-cio2: support multiple sensors and VCMs with same HID

PATCH In review [email protected] 2 participants 2 messages Mar 10, 2023 – Mar 14, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 media: ipu3-cio2: support multiple sensors and VCMs with same HID

From: Bingbu Cao <[email protected]>

In current cio2-bridge, it is using the hid name to register software node and software node will create kobject and sysfs entry according to the node name, if there are multiple sensors and VCMs which are sharing same HID name, it will cause the software nodes registration failure:

sysfs: cannot create duplicate filename '/kernel/software_nodes/dw9714'
...

Call Trace:

software_node_register_nodes
cio2_bridge_init
...
kobject_add_internal failed for dw9714 with -EEXIST,
don't try to register things with the same name in the same directory.

One solution is appending the sensor link(Mipi Port) in SSDB as suffix of the node name to fix this problem.

---
Changes v2 -> v3:
- Update commit message and subject

Changes v1 -> v2:
- Use snprintf() instead of scnprinf()
- Add comments to explain why expand the name size
- Remove the distracting information of backtraces in commit message

---
 drivers/media/pci/intel/ipu3/cio2-bridge.c | 15 +++++++++++----
 drivers/media/pci/intel/ipu3/cio2-bridge.h |  3 ++-
 2 files changed, 13 insertions(+), 5 deletions(-)
drivers/media/pci/intel/ipu3/cio2-bridge.c +11 -4
index dfefe0d8aa95..45427a3a3a25 100644
@@ -212,6 +212,7 @@ static void cio2_bridge_create_connection_swnodes(struct cio2_bridge *bridge,
 						  struct cio2_sensor *sensor)
 {
 	struct software_node *nodes = sensor->swnodes;
+	char vcm_name[ACPI_ID_LEN + 4];
 
 	cio2_bridge_init_swnode_names(sensor);
 
@@ -229,9 +230,13 @@ static void cio2_bridge_create_connection_swnodes(struct cio2_bridge *bridge,
 						sensor->node_names.endpoint,
 						&nodes[SWNODE_CIO2_PORT],
 						sensor->cio2_properties);
-	if (sensor->ssdb.vcmtype)
-		nodes[SWNODE_VCM] =
-			NODE_VCM(cio2_vcm_types[sensor->ssdb.vcmtype - 1]);
+	if (sensor->ssdb.vcmtype) {
+		/* append ssdb.link to distinguish VCM nodes with same HID */
+		snprintf(vcm_name, sizeof(vcm_name), "%s-%u",
+			 cio2_vcm_types[sensor->ssdb.vcmtype - 1],
+			 sensor->ssdb.link);
+		nodes[SWNODE_VCM] = NODE_VCM(vcm_name);
+	}
 
 	cio2_bridge_init_swnode_group(sensor);
 }
@@ -295,7 +300,6 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
 		}
 
 		sensor = &bridge->sensors[bridge->n_sensors];
-		strscpy(sensor->name, cfg->hid, sizeof(sensor->name));
 
 		ret = cio2_bridge_read_acpi_buffer(adev, "SSDB",
 						   &sensor->ssdb,
@@ -303,6 +307,9 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
 		if (ret)
 			goto err_put_adev;
 
+		snprintf(sensor->name, sizeof(sensor->name), "%s-%u",
+			 cfg->hid, sensor->ssdb.link);
+
 		if (sensor->ssdb.vcmtype > ARRAY_SIZE(cio2_vcm_types)) {
 			dev_warn(&adev->dev, "Unknown VCM type %d\n",
 				 sensor->ssdb.vcmtype);
drivers/media/pci/intel/ipu3/cio2-bridge.h +2 -1
index b93b749c65bd..b76ed8a641e2 100644
@@ -113,7 +113,8 @@ struct cio2_sensor_config {
 };
 
 struct cio2_sensor {
-	char name[ACPI_ID_LEN];
+	/* append ssdb.link(u8) in "-%u" format as suffix of HID */
+	char name[ACPI_ID_LEN + 4];
 	struct acpi_device *adev;
 	struct i2c_client *vcm_i2c_client;
 
Signature · 1 line
2.39.1
#1 lore raw

Hi folks,

Quoted 8 lines · On Fri, Mar 10, 2023 at 11:19:10PM +0800, [email protected] wrote:

From: Bingbu Cao <[email protected]>

In current cio2-bridge, it is using the hid name to register software node and software node will create kobject and sysfs entry according to the node name, if there are multiple sensors and VCMs which are sharing same HID name, it will cause the software nodes registration failure:

sysfs: cannot create duplicate filename '/kernel/software_nodes/dw9714'

Any comments on this? Seems fine to me. I'd pick it today / tomorrow if people are fine with it.

Signature · 1 line
Sakari Ailus