Add Ethernet driver for StarFive JH7110 SoC
Subsystems (8)
v6 cover Add Ethernet driver for StarFive JH7110 SoC
This series adds ethernet support for the StarFive JH7110 RISC-V SoC. The series includes MAC driver. The MAC version is dwmac-5.20 (from Synopsys DesignWare). For more information and support, you can visit RVspace wiki[1].
You can simply review or test the patches at the link [2].
This patchset should be applied after the patchset [3] [4].
[1]: https://wiki.rvspace.org/
[2]: https://github.com/SaminGuo/linux/tree/vf2-6.3rc1-gmac
[3]: https://patchwork.kernel.org/project/linux-riscv/cover/[email protected]
[4]: https://github.com/SaminGuo/linux/commit/fa57aaedb3c195bab99ac351a8e44664ae819bf2
Changes since v5:
- Droped "depends on STMMAC_ETH" and compiled DWMAC_STARFIVE to m by default (by Emil)
- Removed clk_gtx in struct starfive_dwmac due to this pointer is only set, but never read. (by Emil)
- Only setting the plat_dat->fix_mac_speed callback when it is needed (by Emil)
- Moved mdio/phy nodes from SOC .dtsi into board .dtsi (by Andrew)
- Modified the parameters passed by starfive,syscon (by Andrew && Emil)
<syscon, offset, mask> ==> <syscon, offset, shift>
- Optimized the patchs(Fewer patches from 12 to 8)
1)merged patch-7 into patch-4 (by Rob)
2)merged patch-9 into patch-5
2)merged patch-11,12 into patch-10
3)Adjusted the patchs order
- Fixed the unevaluatedProperties property from true to false (by Rob)
- Replaced contains:enum with items:const for reset-names in snps,dwmac.yaml (by Rob)
- Tested-by: Tommaso Merciai <[email protected]>
- Rebased on tag v6.3-rc1
Changes history:
Changes since v4:
- Supported both visionfive 2 v1.2A and visionfive 2 v1.3B.
- Reworded the maxitems number of resets property in 'snps,dwmac.yaml'.
- Suggested by Emil, dropped the _PLAT/_plat from the config/function/struct/file names.
- Suggested by Emil, added MODULE_DEVICE_TABLE().
- Suggested by Emil, dropped clk_gtxclk and use clk_tx_inv to set the clock frequency.
- Added phy interface mode configuration function.
- Rebased on tag v6.2.
Changes since v3:
- Reworded the maxitems number of resets property in 'snps,dwmac.yaml'
- Removed the unused code in 'dwmac-starfive-plat.c'.
- Reworded the return statement in 'starfive_eth_plat_fix_mac_speed' function.
Changes since v2:
- Renamed the dt-bindings 'starfive,jh71x0-dwmac.yaml' to 'starfive,jh7110-dwmac.yaml'.
- Reworded the commit messages.
- Reworded the example context in the dt-binding 'starfive,jh7110-dwmac.yaml'.
- Removed "starfive,jh7100-dwmac" compatible string and special initialization of jh7100.
- Removed the parts of YT8531,so dropped patch 5 and 6.
- Reworded the maxitems number of resets property in 'snps,dwmac.yaml'.
Changes since v1:
- Recovered the author of the 1st and 3rd patches back to Emil Renner Berthing.
- Added a new patch to update maxitems number of resets property in 'snps,dwmac.yaml'.
- Fixed the check errors reported by "make dt_binding_check".
- Renamed the dt-binding 'starfive,dwmac-plat.yaml' to 'starfive,jh71x0-dwmac.yaml'.
- Updated the example context in the dt-binding 'starfive,jh71x0-dwmac.yaml'.
- Added new dt-binding 'motorcomm,yt8531.yaml' to describe details of phy clock delay configuration parameters.
- Added more comments for PHY driver setting. For more details, see 'motorcomm,yt8531.yaml'.
- Moved mdio device tree node from 'jh7110-starfive-visionfive-v2.dts' to 'jh7110.dtsi'.
- Re-worded the commit message of several patches.
- Renamed all the functions with starfive_eth_plat prefix in 'dwmac-starfive-plat.c'.
- Added "starfive,jh7100-dwmac" compatible string and special init to support JH7100.
Previous versions:
v1 - https://patchwork.kernel.org/project/linux-riscv/cover/[email protected]/
v2 - https://patchwork.kernel.org/project/linux-riscv/cover/[email protected]/
v3 - https://patchwork.kernel.org/project/linux-riscv/cover/[email protected]/
v4 - https://patchwork.kernel.org/project/linux-riscv/cover/[email protected]/
v5 - https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
Emil Renner Berthing (2):
dt-bindings: net: snps,dwmac: Add dwmac-5.20 version
net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string
Samin Guo (5):
dt-bindings: net: snps,dwmac: Add 'ahb' reset/reset-name
net: stmmac: Add glue layer for StarFive JH7110 SoC
net: stmmac: starfive_dmac: Add phy interface settings
riscv: dts: starfive: jh7110: Add ethernet device nodes
riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
Yanhong Wang (1):
dt-bindings: net: Add support StarFive dwmac
.../devicetree/bindings/net/snps,dwmac.yaml | 17 +- .../bindings/net/starfive,jh7110-dwmac.yaml | 130 ++++++++++++++ MAINTAINERS | 7 + .../jh7110-starfive-visionfive-2-v1.2a.dts | 13 ++ .../jh7110-starfive-visionfive-2-v1.3b.dts | 27 +++ .../jh7110-starfive-visionfive-2.dtsi | 32 ++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 69 +++++++ drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + .../ethernet/stmicro/stmmac/dwmac-starfive.c | 168 ++++++++++++++++++ .../ethernet/stmicro/stmmac/stmmac_platform.c | 3 +- 11 files changed, 474 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
base-commit: 8ca09d5fa3549d142c2080a72a4c70ce389163cd
prerequisite-patch-id: 46cc850aa0e9e03ccf5ed23d8458babfca3d71af
prerequisite-patch-id: a6975e61ee5803fbd74b1c21ab925fd81c3c0eab
prerequisite-patch-id: ac150a8c622e858e088df8121093d448df49c245
prerequisite-patch-id: 044263ef2fb9f1e5a586edbf85d5f67814a28430
prerequisite-patch-id: 89f049f951e5acf75aab92541992f816fd0acc0d
prerequisite-patch-id: 9f3dbc9073eee89134e68977e941e457593c2757
prerequisite-patch-id: 8600b156a235be2b3db53be3f834e7a370e2cfb9
prerequisite-patch-id: 1b2d0982b18da060c82134f05bf3ce16425bac8d
prerequisite-patch-id: 090ba4b78d47bc19204916e76fdbc70021785388
prerequisite-patch-id: a5d9e0f7d4f8163f566678894cf693015119f2d9
prerequisite-patch-id: 4c12d958e3a3d629d86dddb1e4f099d8909393e0
prerequisite-patch-id: bb939c0c7c26b08addfccd890f9d3974b6eaec53
prerequisite-patch-id: 8f5c66dfb14403424044192f6fa05b347ad356a7
prerequisite-patch-id: fd93763b95469912bde9bdfa4cd827c8d5dba9c6
prerequisite-patch-id: 6987950c2eb4b3773b2df8f7934eff434244aeab
prerequisite-patch-id: 258ea5f9b8bf41b6981345dcc81795f25865d38f
prerequisite-patch-id: 8b6f2c9660c0ac0ee4e73e4c21aca8e6b75e81b9
prerequisite-patch-id: dbb0c0151b8bdf093e6ce79fd2fe3f60791a6e0b
prerequisite-patch-id: e7773c977a7b37692e9792b21cc4f17fa58f9215
prerequisite-patch-id: d57e95d31686772abc4c4d5aa1cadc344dc293cd
prerequisite-patch-id: 9f911969d0a550648493952c99096d26e05d4d83
prerequisite-patch-id: 1be0fb49e0fbe293ca8fa94601e191b13c8c67d9
prerequisite-patch-id: a8340aa3403658e8275d0da0038c2d49bc79843a --
2.17.1
PATCH v6 1/8 dt-bindings: net: snps,dwmac: Add dwmac-5.20 version
From: Emil Renner Berthing <[email protected]>
Add dwmac-5.20 IP version to snps.dwmac.yaml
--- Documentation/devicetree/bindings/net/snps,dwmac.yaml | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/net/snps,dwmac.yaml +4 -0
@@ -30,6 +30,7 @@ select: - snps,dwmac-4.10a - snps,dwmac-4.20a - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10
@@ -87,6 +88,7 @@ properties: - snps,dwmac-4.10a - snps,dwmac-4.20a - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10
@@ -575,6 +577,7 @@ allOf: - snps,dwmac-3.50a - snps,dwmac-4.10a - snps,dwmac-4.20a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac
@@ -629,6 +632,7 @@ allOf: - snps,dwmac-4.10a - snps,dwmac-4.20a - snps,dwmac-5.10a + - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac
Signature · 1 line
2.17.1
PATCH v6 2/8 net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string
In reply to Samin GuoFrom: Emil Renner Berthing <[email protected]>
Add "snps,dwmac-5.20" compatible string for 5.20 version that can avoid to define some platform data in the glue layer.
--- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +2 -1
@@ -519,7 +519,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)if (of_device_is_compatible (np,"snps,dwmac-4.00" ) ||of_device_is_compatible (np,"snps,dwmac-4.10a" ) ||of_device_is_compatible (np,"snps,dwmac-4.20a" ) || -of_device_is_compatible (np,"snps,dwmac-5.10a" )) { +of_device_is_compatible (np,"snps,dwmac-5.10a" ) || +of_device_is_compatible (np,"snps,dwmac-5.20" )) { plat->has_gmac4 =1 ; plat->has_gmac =0 ; plat->pmt =1 ;
Signature · 1 line
2.17.1
PATCH v6 3/8 dt-bindings: net: snps,dwmac: Add 'ahb' reset/reset-name
In reply to Samin GuoAccording to:stmmac_platform.c: stmmac_probe_config_dtstmmac_main.c: stmmac_dvr_probe
dwmac controller may require one (stmmaceth) or two (stmmaceth+ahb) reset signals, and the maxItems of resets/reset-names is going to be 2.
The gmac of Starfive Jh7110 SOC must have two resets. it uses snps,dwmac-5.20 IP.
--- .../devicetree/bindings/net/snps,dwmac.yaml | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/net/snps,dwmac.yaml +8 -4
@@ -133,12 +133,16 @@ properties: - ptp_ref resets: - maxItems: 1 - description: - MAC Reset signal. + minItems: 1 + items: + - description: GMAC stmmaceth reset + - description: AHB reset reset-names: - const: stmmaceth + minItems: 1 + items: + - const: stmmaceth + - const: ahb power-domains: maxItems: 1
Signature · 1 line
2.17.1
PATCH v6 4/8 dt-bindings: net: Add support StarFive dwmac
In reply to Samin GuoFrom: Yanhong Wang <[email protected]>
Add documentation to describe StarFive dwmac driver(GMAC).
--- .../devicetree/bindings/net/snps,dwmac.yaml | 1 + .../bindings/net/starfive,jh7110-dwmac.yaml | 130 ++++++++++++++++++ MAINTAINERS | 6 + 3 files changed, 137 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
Documentation/devicetree/bindings/net/snps,dwmac.yaml +1 -0
@@ -91,6 +91,7 @@ properties: - snps,dwmac-5.20 - snps,dwxgmac - snps,dwxgmac-2.10 + - starfive,jh7110-dwmac reg: minItems: 1
Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml new file +130 -0
130 lines not on this page · raw message
MAINTAINERS +6 -0
@@ -19913,6 +19913,12 @@ M: Emil Renner Berthing <[email protected]> S: Maintained F: arch/riscv/boot/dts/starfive/ +STARFIVE DWMAC GLUE LAYER +M: Emil Renner Berthing <[email protected]> +M: Samin Guo <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml + STARFIVE JH71X0 CLOCK DRIVERS M: Emil Renner Berthing <[email protected]> M: Hal Feng <[email protected]>
Signature · 1 line
2.17.1
PATCH v6 5/8 net: stmmac: Add glue layer for StarFive JH7110 SoC
In reply to Samin GuoThis adds StarFive dwmac driver support on the StarFive JH7110 SoC.
--- MAINTAINERS | 1 + drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + .../ethernet/stmicro/stmmac/dwmac-starfive.c | 121 ++++++++++++++++++ 4 files changed, 135 insertions(+) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
MAINTAINERS +1 -0
@@ -19917,6 +19917,7 @@ STARFIVE DWMAC GLUE LAYER M: Emil Renner Berthing <[email protected]> M: Samin Guo <[email protected]> S: Maintained +F: Documentation/devicetree/bindings/net/dwmac-starfive.c F: Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml STARFIVE JH71X0 CLOCK DRIVERS
drivers/net/ethernet/stmicro/stmmac/Kconfig +12 -0
@@ -165,6 +165,18 @@ config DWMAC_SOCFPGA for the stmmac device driver. This driver is used for arria5 and cyclone5 FPGA SoCs. +config DWMAC_STARFIVE + tristate "StarFive dwmac support" + depends on OF && (ARCH_STARFIVE || COMPILE_TEST) + select MFD_SYSCON + default m if ARCH_STARFIVE + help + Support for ethernet controllers on StarFive RISC-V SoCs + + This selects the StarFive platform specific glue layer support for + the stmmac device driver. This driver is used for StarFive JH7110 + ethernet controller. + config DWMAC_STI tristate "STi GMAC support" default ARCH_STI
drivers/net/ethernet/stmicro/stmmac/Makefile +1 -0
@@ -23,6 +23,7 @@ obj-$(CONFIG_DWMAC_OXNAS) += dwmac-oxnas.o obj-$(CONFIG_DWMAC_QCOM_ETHQOS) += dwmac-qcom-ethqos.o obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o +obj-$(CONFIG_DWMAC_STARFIVE) += dwmac-starfive.o obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c new file +121 -0
121 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH v6 6/8 net: stmmac: starfive_dmac: Add phy interface settings
In reply to Samin Guodwmac supports multiple modess. When working under rmii and rgmii, you need to set different phy interfaces.
According to the dwmac document, when working in rmii, it needs to be set to 0x4, and rgmii needs to be set to 0x1.
The phy interface needs to be set in syscon, the format is as follows:
starfive,syscon: <&syscon, offset, shift>
--- .../ethernet/stmicro/stmmac/dwmac-starfive.c | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c +47 -0
@@ -13,6 +13,10 @@#include "stmmac_platform.h" +#define STARFIVE_DWMAC_PHY_INFT_RGMII 0x1 +#define STARFIVE_DWMAC_PHY_INFT_RMII 0x4 +#define STARFIVE_DWMAC_PHY_INFT_FIELD 0x7U +struct starfive_dwmac {struct device *dev;struct clk *clk_tx;
@@ -44,6 +48,43 @@ static void starfive_dwmac_fix_mac_speed(void *priv, unsigned int speed)dev_err (dwmac->dev,"failed to set tx rate %lu\n" , rate); } +static int starfive_dwmac_set_mode (struct plat_stmmacenet_data *plat_dat) +{ +struct starfive_dwmac *dwmac = plat_dat->bsp_priv; +struct regmap *regmap; +unsigned int args[2 ]; +unsigned int mode; + +switch (plat_dat->interface) { +case PHY_INTERFACE_MODE_RMII : + mode =STARFIVE_DWMAC_PHY_INFT_RMII ; +break ; + +case PHY_INTERFACE_MODE_RGMII : +case PHY_INTERFACE_MODE_RGMII_ID : + mode =STARFIVE_DWMAC_PHY_INFT_RGMII ; +break ; + +default : +dev_err (dwmac->dev,"unsupported interface %d\n" , + plat_dat->interface); +return -EINVAL ; + } + + regmap =syscon_regmap_lookup_by_phandle_args (dwmac->dev->of_node, +"starfive,syscon" , +2 , args); +if (IS_ERR (regmap)) { +dev_err (dwmac->dev,"syscon regmap failed.\n" ); +return -ENXIO ; + } + +/* args[0]:offset args[1]: shift */ +return regmap_update_bits (regmap, args[0 ], +STARFIVE_DWMAC_PHY_INFT_FIELD << args[1 ], + mode << args[1 ]); +} +static int starfive_dwmac_probe (struct platform_device *pdev) {struct plat_stmmacenet_data *plat_dat;
@@ -89,6 +130,12 @@ static int starfive_dwmac_probe(struct platform_device *pdev) plat_dat->bsp_priv = dwmac; plat_dat->dma_cfg->dche = true; + err =starfive_dwmac_set_mode (plat_dat); +if (err) { +dev_err (&pdev->dev,"dwmac set mode failed.\n" ); +return err; + } + err =stmmac_dvr_probe (&pdev->dev, plat_dat, &stmmac_res);if (err) {stmmac_remove_config_dt (pdev, plat_dat);
Signature · 1 line
2.17.1
PATCH v6 7/8 riscv: dts: starfive: jh7110: Add ethernet device nodes
In reply to Samin GuoAdd JH7110 ethernet device node to support gmac driver for the JH7110 RISC-V SoC.
--- arch/riscv/boot/dts/starfive/jh7110.dtsi | 69 ++++++++++++++++++++++++ 1 file changed, 69 insertions(+)
arch/riscv/boot/dts/starfive/jh7110.dtsi +69 -0
@@ -239,6 +239,13 @@ #clock-cells = <0>; }; + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <4>; + snps,blen = <256 128 64 32 0 0 0>; + }; + tdm_ext: tdm-ext-clock { compatible = "fixed-clock"; clock-output-names = "tdm_ext";
@@ -488,6 +495,68 @@ #gpio-cells = <2>; }; + gmac0: ethernet@16030000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x0 0x16030000 0x0 0x10000>; + clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>, + <&aoncrg JH7110_AONCLK_GMAC0_AHB>, + <&syscrg JH7110_SYSCLK_GMAC0_PTP>, + <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>, + <&syscrg JH7110_SYSCLK_GMAC0_GTXC>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>, + <&aoncrg JH7110_AONRST_GMAC0_AHB>; + reset-names = "stmmaceth", "ahb"; + interrupts = <7>, <6>, <5>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,tso; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&aon_syscon 0xc 0x12>; + status = "disabled"; + }; + + gmac1: ethernet@16040000 { + compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; + reg = <0x0 0x16040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>, + <&syscrg JH7110_SYSCLK_GMAC1_AHB>, + <&syscrg JH7110_SYSCLK_GMAC1_PTP>, + <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>, + <&syscrg JH7110_SYSCLK_GMAC1_GTXC>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "gtx"; + resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>, + <&syscrg JH7110_SYSRST_GMAC1_AHB>; + reset-names = "stmmaceth", "ahb"; + interrupts = <78>, <77>, <76>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + snps,multicast-filter-bins = <64>; + snps,perfect-filter-entries = <8>; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + snps,fixed-burst; + snps,no-pbl-x8; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,tso; + snps,en-tx-lpi-clockgating; + snps,txpbl = <16>; + snps,rxpbl = <16>; + starfive,syscon = <&sys_syscon 0x90 0x2>; + status = "disabled"; + }; + aoncrg: clock-controller@17000000 { compatible = "starfive,jh7110-aoncrg"; reg = <0x0 0x17000000 0x0 0x10000>;
Signature · 1 line
2.17.1
PATCH v6 8/8 riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
In reply to Samin Guov1.3B:
v1.3B uses motorcomm YT8531(rgmii-id phy) x2, need delay and inverse configurations.
The tx_clk of v1.3B uses an external clock and needs to be switched to an external clock source.
v1.2A:
v1.2A gmac0 uses motorcomm YT8531(rgmii-id) PHY, and needs delay configurations.
v1.2A gmac1 uses motorcomm YT8512(rmii) PHY, and needs to switch rx and rx to external clock sources.
--- .../jh7110-starfive-visionfive-2-v1.2a.dts | 13 ++++++++ .../jh7110-starfive-visionfive-2-v1.3b.dts | 27 ++++++++++++++++ .../jh7110-starfive-visionfive-2.dtsi | 32 +++++++++++++++++++ 3 files changed, 72 insertions(+)
arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts +13 -0
@@ -11,3 +11,16 @@ model = "StarFive VisionFive 2 v1.2A"; compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110"; }; + +&gmac1 { + phy-mode = "rmii"; + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>, + <&syscrg JH7110_SYSCLK_GMAC1_RX>; + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>, + <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>; +}; + +&phy0 { + rx-internal-delay-ps = <1900>; + tx-internal-delay-ps = <1350>; +};
arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts +27 -0
@@ -11,3 +11,30 @@ model = "StarFive VisionFive 2 v1.3B"; compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; }; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; +}; + +&gmac1 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>; + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>; +}; + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + rx-internal-delay-ps = <1900>; + tx-internal-delay-ps = <1500>; +}; + +&phy1 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-100-inverted; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; +};
arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +32 -0
@@ -11,6 +11,8 @@ / { aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; i2c0 = &i2c0; i2c2 = &i2c2; i2c5 = &i2c5;
@@ -86,6 +88,36 @@ clock-frequency = <49152000>; }; +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <0>; + }; + }; +}; + &i2c0 { clock-frequency = <100000>; i2c-sda-hold-time-ns = <300>;
Signature · 1 line
2.17.1
Jakub Kicinski
maintainerQuoted 4 lines · On Mon, 13 Mar 2023 11:46:37 +0800 Samin Guo wrote:
This series adds ethernet support for the StarFive JH7110 RISC-V SoC. The series includes MAC driver. The MAC version is dwmac-5.20 (from Synopsys DesignWare). For more information and support, you can visit RVspace wiki[1].
I'm guessing the first 6 patches need to go via networking and patches 7 and 8 via riscv trees? Please repost those separately, otherwise the series won't apply and relevant CIs can't run on it.
Re: [PATCH v6 0/8] Add Ethernet driver for StarFive JH7110 SoC
From: Jakub Kicinski <[email protected]>
to: Samin Guo <[email protected]>
data: 2023/3/14
Quoted 9 lines · On Mon, 13 Mar 2023 11:46:37 +0800 Samin Guo wrote:
Quoted 4 lines
This series adds ethernet support for the StarFive JH7110 RISC-V SoC. The series includes MAC driver. The MAC version is dwmac-5.20 (from Synopsys DesignWare). For more information and support, you can visit RVspace wiki[1].
I'm guessing the first 6 patches need to go via networking and patches 7 and 8 via riscv trees? Please repost those separately, otherwise the series won't apply and relevant CIs can't run on it.
Hi Jakub,
Thanks a lot, I will repost those separately.
Best regards,
Samin
Hi,
Quoted 11 lines · Guo Samin
Re: [PATCH v6 0/8] Add Ethernet driver for StarFive JH7110 SoC
From: Jakub Kicinski <[email protected]>
to: Samin Guo <[email protected]>
data: 2023/3/14Quoted 6 lines · On Mon, 13 Mar 2023 11:46:37 +0800 Samin Guo wrote:
Quoted 4 lines
This series adds ethernet support for the StarFive JH7110 RISC-V SoC. The series includes MAC driver. The MAC version is dwmac-5.20 (from Synopsys DesignWare). For more information and support, you can visit RVspace wiki[1].
Quoted 7 lines
Quoted 3 lines
I'm guessing the first 6 patches need to go via networking and patches 7 and 8 via riscv trees? Please repost those separately, otherwise the series won't apply and relevant CIs can't run on it.
Hi Jakub,
Thanks a lot, I will repost those separately.
Unless I am mistaken, this patches haven't been reposted since them. Could you please do that?
Thanks
Aurelien
Signature · 2 lines
Aurelien Jarno GPG: 4096R/1DDD8C9B [email protected] http://aurel32.net
Re: [PATCH v6 0/8] Add Ethernet driver for StarFive JH7110 SoC
From: Aurelien Jarno <[email protected]>
tro: Guo Samin <[email protected]>
data: 2023/7/2
Quoted 20 lines
Hi,
Quoted 17 lines · Guo Samin
Re: [PATCH v6 0/8] Add Ethernet driver for StarFive JH7110 SoC
From: Jakub Kicinski <[email protected]>
to: Samin Guo <[email protected]>
data: 2023/3/14Quoted 9 lines · On Mon, 13 Mar 2023 11:46:37 +0800 Samin Guo wrote:
Quoted 4 lines
This series adds ethernet support for the StarFive JH7110 RISC-V SoC. The series includes MAC driver. The MAC version is dwmac-5.20 (from Synopsys DesignWare). For more information and support, you can visit RVspace wiki[1].
I'm guessing the first 6 patches need to go via networking and patches 7 and 8 via riscv trees? Please repost those separately, otherwise the series won't apply and relevant CIs can't run on it.
Hi Jakub,
Quoted 8 lines
Quoted 1 line
Thanks a lot, I will repost those separately.
Unless I am mistaken, this patches haven't been reposted since them. Could you please do that?
Thanks
Aurelien
Hi Aurelien,
Sorry for not having an update in a while. I'm waiting for the configuration of PHY to be finalized and the SYSCON patch to finally be merged in.
1) There are some updates to visionfive 2's PHY Drive Strength[1], but the implementation has not yet been finalized. Of course this is not the most important thing, since it can be updated later.
2) DTS depends on SYSCON. If the patch about SYSCON[2] has not been merged into the main line, there will be compilation problems. SYSCON's patch is part of Xingyu's PLL patchsets, and if the parts of SYSCON could be merged first, there would be no problem.
[1]: https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]
[2]: https://patchwork.kernel.org/project/linux-riscv/patch/[email protected]
Best regards,
Samin