Skip to contentSkip to conversation

sched/psi: Allow unprivileged PSI polling

PATCH Superseded Domenico Cerasuolo 3 participants 13 messages Mar 9, 2023 – Mar 22, 2023 2 messages not in the archive

Subsystems (4)

v1 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

cover sched/psi: Allow unprivileged PSI polling

PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average pressures aggregated every 2s. The other is creating a pollable fd for a specific resource and cgroup.

The trigger creation requires CAP_SYS_RESOURCE, and gives the possibility to pick specific time window and threshold, spawing an RT thread to aggregate the data.

Systemd would like to provide containers the option to monitor pressure on their own cgroup and sub-cgroups. For example, if systemd launches a container that itself then launches services, the container should have the ability to poll() for pressure in individual services. But neither the container nor the services are privileged.

The series is implemented in 4 steps in order to reduce the noise of the change.

Domenico Cerasuolo (4):
sched/psi: rearrange polling code in preparation sched/psi: rename existing poll members in preparation sched/psi: extract update_triggers side effect sched/psi: allow unprivileged polling of N*2s period

 Documentation/accounting/psi.rst |   4 +
 include/linux/psi.h              |   2 +-
 include/linux/psi_types.h        |  43 ++--
 kernel/cgroup/cgroup.c           |   2 +-
 kernel/sched/psi.c               | 412 ++++++++++++++++---------------
 5 files changed, 250 insertions(+), 213 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/4 sched/psi: rearrange polling code in preparation

Move a few functions up in the file to avoid forward declaration needed in the patch implementing unprivileged PSI triggers.

---
 kernel/sched/psi.c | 196 ++++++++++++++++++++++-----------------------
 1 file changed, 98 insertions(+), 98 deletions(-)
kernel/sched/psi.c +98 -98
index 02e011cabe91..fe9269f1d2a4 100644
@@ -384,92 +384,6 @@ static void collect_percpu_times(struct psi_group *group,
 		*pchanged_states = changed_states;
 }
 
-static u64 update_averages(struct psi_group *group, u64 now)
-{
-	unsigned long missed_periods = 0;
-	u64 expires, period;
-	u64 avg_next_update;
-	int s;
-
-	/* avgX= */
-	expires = group->avg_next_update;
-	if (now - expires >= psi_period)
-		missed_periods = div_u64(now - expires, psi_period);
-
-	/*
-	 * The periodic clock tick can get delayed for various
-	 * reasons, especially on loaded systems. To avoid clock
-	 * drift, we schedule the clock in fixed psi_period intervals.
-	 * But the deltas we sample out of the per-cpu buckets above
-	 * are based on the actual time elapsing between clock ticks.
-	 */
-	avg_next_update = expires + ((1 + missed_periods) * psi_period);
-	period = now - (group->avg_last_update + (missed_periods * psi_period));
-	group->avg_last_update = now;
-
-	for (s = 0; s < NR_PSI_STATES - 1; s++) {
-		u32 sample;
-
-		sample = group->total[PSI_AVGS][s] - group->avg_total[s];
-		/*
-		 * Due to the lockless sampling of the time buckets,
-		 * recorded time deltas can slip into the next period,
-		 * which under full pressure can result in samples in
-		 * excess of the period length.
-		 *
-		 * We don't want to report non-sensical pressures in
-		 * excess of 100%, nor do we want to drop such events
-		 * on the floor. Instead we punt any overage into the
-		 * future until pressure subsides. By doing this we
-		 * don't underreport the occurring pressure curve, we
-		 * just report it delayed by one period length.
-		 *
-		 * The error isn't cumulative. As soon as another
-		 * delta slips from a period P to P+1, by definition
-		 * it frees up its time T in P.
-		 */
-		if (sample > period)
-			sample = period;
-		group->avg_total[s] += sample;
-		calc_avgs(group->avg[s], missed_periods, sample, period);
-	}
-
-	return avg_next_update;
-}
-
-static void psi_avgs_work(struct work_struct *work)
-{
-	struct delayed_work *dwork;
-	struct psi_group *group;
-	u32 changed_states;
-	u64 now;
-
-	dwork = to_delayed_work(work);
-	group = container_of(dwork, struct psi_group, avgs_work);
-
-	mutex_lock(&group->avgs_lock);
-
-	now = sched_clock();
-
-	collect_percpu_times(group, PSI_AVGS, &changed_states);
-	/*
-	 * If there is task activity, periodically fold the per-cpu
-	 * times and feed samples into the running averages. If things
-	 * are idle and there is no data to process, stop the clock.
-	 * Once restarted, we'll catch up the running averages in one
-	 * go - see calc_avgs() and missed_periods.
-	 */
-	if (now >= group->avg_next_update)
-		group->avg_next_update = update_averages(group, now);
-
-	if (changed_states & PSI_STATE_RESCHEDULE) {
-		schedule_delayed_work(dwork, nsecs_to_jiffies(
-				group->avg_next_update - now) + 1);
-	}
-
-	mutex_unlock(&group->avgs_lock);
-}
-
 /* Trigger tracking window manipulations */
 static void window_reset(struct psi_window *win, u64 now, u64 value,
 			 u64 prev_growth)
@@ -516,18 +430,6 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
 	return growth;
 }
 
-static void init_triggers(struct psi_group *group, u64 now)
-{
-	struct psi_trigger *t;
-
-	list_for_each_entry(t, &group->triggers, node)
-		window_reset(&t->win, now,
-				group->total[PSI_POLL][t->state], 0);
-	memcpy(group->polling_total, group->total[PSI_POLL],
-		   sizeof(group->polling_total));
-	group->polling_next_update = now + group->poll_min_period;
-}
-
 static u64 update_triggers(struct psi_group *group, u64 now)
 {
 	struct psi_trigger *t;
@@ -590,6 +492,104 @@ static u64 update_triggers(struct psi_group *group, u64 now)
 	return now + group->poll_min_period;
 }
 
+static u64 update_averages(struct psi_group *group, u64 now)
+{
+	unsigned long missed_periods = 0;
+	u64 expires, period;
+	u64 avg_next_update;
+	int s;
+
+	/* avgX= */
+	expires = group->avg_next_update;
+	if (now - expires >= psi_period)
+		missed_periods = div_u64(now - expires, psi_period);
+
+	/*
+	 * The periodic clock tick can get delayed for various
+	 * reasons, especially on loaded systems. To avoid clock
+	 * drift, we schedule the clock in fixed psi_period intervals.
+	 * But the deltas we sample out of the per-cpu buckets above
+	 * are based on the actual time elapsing between clock ticks.
+	 */
+	avg_next_update = expires + ((1 + missed_periods) * psi_period);
+	period = now - (group->avg_last_update + (missed_periods * psi_period));
+	group->avg_last_update = now;
+
+	for (s = 0; s < NR_PSI_STATES - 1; s++) {
+		u32 sample;
+
+		sample = group->total[PSI_AVGS][s] - group->avg_total[s];
+		/*
+		 * Due to the lockless sampling of the time buckets,
+		 * recorded time deltas can slip into the next period,
+		 * which under full pressure can result in samples in
+		 * excess of the period length.
+		 *
+		 * We don't want to report non-sensical pressures in
+		 * excess of 100%, nor do we want to drop such events
+		 * on the floor. Instead we punt any overage into the
+		 * future until pressure subsides. By doing this we
+		 * don't underreport the occurring pressure curve, we
+		 * just report it delayed by one period length.
+		 *
+		 * The error isn't cumulative. As soon as another
+		 * delta slips from a period P to P+1, by definition
+		 * it frees up its time T in P.
+		 */
+		if (sample > period)
+			sample = period;
+		group->avg_total[s] += sample;
+		calc_avgs(group->avg[s], missed_periods, sample, period);
+	}
+
+	return avg_next_update;
+}
+
+static void psi_avgs_work(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct psi_group *group;
+	u32 changed_states;
+	u64 now;
+
+	dwork = to_delayed_work(work);
+	group = container_of(dwork, struct psi_group, avgs_work);
+
+	mutex_lock(&group->avgs_lock);
+
+	now = sched_clock();
+
+	collect_percpu_times(group, PSI_AVGS, &changed_states);
+	/*
+	 * If there is task activity, periodically fold the per-cpu
+	 * times and feed samples into the running averages. If things
+	 * are idle and there is no data to process, stop the clock.
+	 * Once restarted, we'll catch up the running averages in one
+	 * go - see calc_avgs() and missed_periods.
+	 */
+	if (now >= group->avg_next_update)
+		group->avg_next_update = update_averages(group, now);
+
+	if (changed_states & PSI_STATE_RESCHEDULE) {
+		schedule_delayed_work(dwork, nsecs_to_jiffies(
+				group->avg_next_update - now) + 1);
+	}
+
+	mutex_unlock(&group->avgs_lock);
+}
+
+static void init_triggers(struct psi_group *group, u64 now)
+{
+	struct psi_trigger *t;
+
+	list_for_each_entry(t, &group->triggers, node)
+		window_reset(&t->win, now,
+				group->total[PSI_POLL][t->state], 0);
+	memcpy(group->polling_total, group->total[PSI_POLL],
+		   sizeof(group->polling_total));
+	group->polling_next_update = now + group->poll_min_period;
+}
+
 /* Schedule polling if it's not already scheduled or forced. */
 static void psi_schedule_poll_work(struct psi_group *group, unsigned long delay,
 				   bool force)
Signature · 1 line
2.34.1
#2 lore raw

Re: [PATCH 1/4] sched/psi: rearrange polling code in preparation

Quoted 6 lines · Domenico Cerasuolo

Move a few functions up in the file to avoid forward declaration needed in the patch implementing unprivileged PSI triggers.

LGTM. Will Ack when we finalize the rest of the patchset.

Quoted 228 lines
---
 kernel/sched/psi.c | 196 ++++++++++++++++++++++-----------------------
 1 file changed, 98 insertions(+), 98 deletions(-)
kernel/sched/psi.c +98 -99
index 02e011cabe91..fe9269f1d2a4 100644
@@ -384,92 +384,6 @@ static void collect_percpu_times(struct psi_group *group,
                *pchanged_states = changed_states;
 }
 
-static u64 update_averages(struct psi_group *group, u64 now)
-{
-       unsigned long missed_periods = 0;
-       u64 expires, period;
-       u64 avg_next_update;
-       int s;
-
-       /* avgX= */
-       expires = group->avg_next_update;
-       if (now - expires >= psi_period)
-               missed_periods = div_u64(now - expires, psi_period);
-
-       /*
-        * The periodic clock tick can get delayed for various
-        * reasons, especially on loaded systems. To avoid clock
-        * drift, we schedule the clock in fixed psi_period intervals.
-        * But the deltas we sample out of the per-cpu buckets above
-        * are based on the actual time elapsing between clock ticks.
-        */
-       avg_next_update = expires + ((1 + missed_periods) * psi_period);
-       period = now - (group->avg_last_update + (missed_periods * psi_period));
-       group->avg_last_update = now;
-
-       for (s = 0; s < NR_PSI_STATES - 1; s++) {
-               u32 sample;
-
-               sample = group->total[PSI_AVGS][s] - group->avg_total[s];
-               /*
-                * Due to the lockless sampling of the time buckets,
-                * recorded time deltas can slip into the next period,
-                * which under full pressure can result in samples in
-                * excess of the period length.
-                *
-                * We don't want to report non-sensical pressures in
-                * excess of 100%, nor do we want to drop such events
-                * on the floor. Instead we punt any overage into the
-                * future until pressure subsides. By doing this we
-                * don't underreport the occurring pressure curve, we
-                * just report it delayed by one period length.
-                *
-                * The error isn't cumulative. As soon as another
-                * delta slips from a period P to P+1, by definition
-                * it frees up its time T in P.
-                */
-               if (sample > period)
-                       sample = period;
-               group->avg_total[s] += sample;
-               calc_avgs(group->avg[s], missed_periods, sample, period);
-       }
-
-       return avg_next_update;
-}
-
-static void psi_avgs_work(struct work_struct *work)
-{
-       struct delayed_work *dwork;
-       struct psi_group *group;
-       u32 changed_states;
-       u64 now;
-
-       dwork = to_delayed_work(work);
-       group = container_of(dwork, struct psi_group, avgs_work);
-
-       mutex_lock(&group->avgs_lock);
-
-       now = sched_clock();
-
-       collect_percpu_times(group, PSI_AVGS, &changed_states);
-       /*
-        * If there is task activity, periodically fold the per-cpu
-        * times and feed samples into the running averages. If things
-        * are idle and there is no data to process, stop the clock.
-        * Once restarted, we'll catch up the running averages in one
-        * go - see calc_avgs() and missed_periods.
-        */
-       if (now >= group->avg_next_update)
-               group->avg_next_update = update_averages(group, now);
-
-       if (changed_states & PSI_STATE_RESCHEDULE) {
-               schedule_delayed_work(dwork, nsecs_to_jiffies(
-                               group->avg_next_update - now) + 1);
-       }
-
-       mutex_unlock(&group->avgs_lock);
-}
-
 /* Trigger tracking window manipulations */
 static void window_reset(struct psi_window *win, u64 now, u64 value,
                         u64 prev_growth)
@@ -516,18 +430,6 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
        return growth;
 }
 
-static void init_triggers(struct psi_group *group, u64 now)
-{
-       struct psi_trigger *t;
-
-       list_for_each_entry(t, &group->triggers, node)
-               window_reset(&t->win, now,
-                               group->total[PSI_POLL][t->state], 0);
-       memcpy(group->polling_total, group->total[PSI_POLL],
-                  sizeof(group->polling_total));
-       group->polling_next_update = now + group->poll_min_period;
-}
-
 static u64 update_triggers(struct psi_group *group, u64 now)
 {
        struct psi_trigger *t;
@@ -590,6 +492,104 @@ static u64 update_triggers(struct psi_group *group, u64 now)
        return now + group->poll_min_period;
 }
 
+static u64 update_averages(struct psi_group *group, u64 now)
+{
+       unsigned long missed_periods = 0;
+       u64 expires, period;
+       u64 avg_next_update;
+       int s;
+
+       /* avgX= */
+       expires = group->avg_next_update;
+       if (now - expires >= psi_period)
+               missed_periods = div_u64(now - expires, psi_period);
+
+       /*
+        * The periodic clock tick can get delayed for various
+        * reasons, especially on loaded systems. To avoid clock
+        * drift, we schedule the clock in fixed psi_period intervals.
+        * But the deltas we sample out of the per-cpu buckets above
+        * are based on the actual time elapsing between clock ticks.
+        */
+       avg_next_update = expires + ((1 + missed_periods) * psi_period);
+       period = now - (group->avg_last_update + (missed_periods * psi_period));
+       group->avg_last_update = now;
+
+       for (s = 0; s < NR_PSI_STATES - 1; s++) {
+               u32 sample;
+
+               sample = group->total[PSI_AVGS][s] - group->avg_total[s];
+               /*
+                * Due to the lockless sampling of the time buckets,
+                * recorded time deltas can slip into the next period,
+                * which under full pressure can result in samples in
+                * excess of the period length.
+                *
+                * We don't want to report non-sensical pressures in
+                * excess of 100%, nor do we want to drop such events
+                * on the floor. Instead we punt any overage into the
+                * future until pressure subsides. By doing this we
+                * don't underreport the occurring pressure curve, we
+                * just report it delayed by one period length.
+                *
+                * The error isn't cumulative. As soon as another
+                * delta slips from a period P to P+1, by definition
+                * it frees up its time T in P.
+                */
+               if (sample > period)
+                       sample = period;
+               group->avg_total[s] += sample;
+               calc_avgs(group->avg[s], missed_periods, sample, period);
+       }
+
+       return avg_next_update;
+}
+
+static void psi_avgs_work(struct work_struct *work)
+{
+       struct delayed_work *dwork;
+       struct psi_group *group;
+       u32 changed_states;
+       u64 now;
+
+       dwork = to_delayed_work(work);
+       group = container_of(dwork, struct psi_group, avgs_work);
+
+       mutex_lock(&group->avgs_lock);
+
+       now = sched_clock();
+
+       collect_percpu_times(group, PSI_AVGS, &changed_states);
+       /*
+        * If there is task activity, periodically fold the per-cpu
+        * times and feed samples into the running averages. If things
+        * are idle and there is no data to process, stop the clock.
+        * Once restarted, we'll catch up the running averages in one
+        * go - see calc_avgs() and missed_periods.
+        */
+       if (now >= group->avg_next_update)
+               group->avg_next_update = update_averages(group, now);
+
+       if (changed_states & PSI_STATE_RESCHEDULE) {
+               schedule_delayed_work(dwork, nsecs_to_jiffies(
+                               group->avg_next_update - now) + 1);
+       }
+
+       mutex_unlock(&group->avgs_lock);
+}
+
+static void init_triggers(struct psi_group *group, u64 now)
+{
+       struct psi_trigger *t;
+
+       list_for_each_entry(t, &group->triggers, node)
+               window_reset(&t->win, now,
+                               group->total[PSI_POLL][t->state], 0);
+       memcpy(group->polling_total, group->total[PSI_POLL],
+                  sizeof(group->polling_total));
+       group->polling_next_update = now + group->poll_min_period;
+}
+
 /* Schedule polling if it's not already scheduled or forced. */
 static void psi_schedule_poll_work(struct psi_group *group, unsigned long delay,
                                   bool force)
--

2.34.1

#3 lore raw

PATCH 2/4 sched/psi: rename existing poll members in preparation

In reply to Domenico Cerasuolo

Renaming in PSI implementation to make a clear distinction between privileged and unprivileged triggers code to be implemented in the next patch.

---
 include/linux/psi_types.h |  36 ++++-----
 kernel/sched/psi.c        | 163 +++++++++++++++++++-------------------
 2 files changed, 100 insertions(+), 99 deletions(-)
include/linux/psi_types.h +18 -18
index 1e0a0d7ace3a..1819afa8b198 100644
@@ -175,26 +175,26 @@ struct psi_group {
 	u64 total[NR_PSI_AGGREGATORS][NR_PSI_STATES - 1];
 	unsigned long avg[NR_PSI_STATES - 1][3];
 
-	/* Monitor work control */
-	struct task_struct __rcu *poll_task;
-	struct timer_list poll_timer;
-	wait_queue_head_t poll_wait;
-	atomic_t poll_wakeup;
-	atomic_t poll_scheduled;
+	/* Monitor RT polling work control */
+	struct task_struct __rcu *rtpoll_task;
+	struct timer_list rtpoll_timer;
+	wait_queue_head_t rtpoll_wait;
+	atomic_t rtpoll_wakeup;
+	atomic_t rtpoll_scheduled;
 
 	/* Protects data used by the monitor */
-	struct mutex trigger_lock;
-
-	/* Configured polling triggers */
-	struct list_head triggers;
-	u32 nr_triggers[NR_PSI_STATES - 1];
-	u32 poll_states;
-	u64 poll_min_period;
-
-	/* Total stall times at the start of monitor activation */
-	u64 polling_total[NR_PSI_STATES - 1];
-	u64 polling_next_update;
-	u64 polling_until;
+	struct mutex rtpoll_trigger_lock;
+
+	/* Configured RT polling triggers */
+	struct list_head rtpoll_triggers;
+	u32 rtpoll_nr_triggers[NR_PSI_STATES - 1];
+	u32 rtpoll_states;
+	u64 rtpoll_min_period;
+
+	/* Total stall times at the start of RT polling monitor activation */
+	u64 rtpoll_total[NR_PSI_STATES - 1];
+	u64 rtpoll_next_update;
+	u64 rtpoll_until;
 };
 
 #else /* CONFIG_PSI */
kernel/sched/psi.c +82 -81

339 lines not on this page · raw message

Signature · 1 line
2.34.1
#4 lore raw

Re: [PATCH 2/4] sched/psi: rename existing poll members in preparation

Quoted 4 lines · Domenico Cerasuolo

Renaming in PSI implementation to make a clear distinction between privileged and unprivileged triggers code to be implemented in the next patch.

This looks like a lot of churn which could be avoided if the new unprivileged triggers were called something else, like unpriv_triggers/unpriv_nr_triggers. But maybe even a better way would be to have smth like this:

struct trigger_info {
       struct list_head triggers;
       u32 nr_triggers[NR_PSI_STATES - 1];
};
struct psi_group {
       ...
       struct trigger_info trig_info[NR_PSI_AGGREGATORS];
};

I think this would also simplify the update_triggers() code in the last patch of this patchset.

Quoted 415 lines
---
 include/linux/psi_types.h |  36 ++++-----
 kernel/sched/psi.c        | 163 +++++++++++++++++++-------------------
 2 files changed, 100 insertions(+), 99 deletions(-)
include/linux/psi_types.h +18 -18
index 1e0a0d7ace3a..1819afa8b198 100644
@@ -175,26 +175,26 @@ struct psi_group {
        u64 total[NR_PSI_AGGREGATORS][NR_PSI_STATES - 1];
        unsigned long avg[NR_PSI_STATES - 1][3];
 
-       /* Monitor work control */
-       struct task_struct __rcu *poll_task;
-       struct timer_list poll_timer;
-       wait_queue_head_t poll_wait;
-       atomic_t poll_wakeup;
-       atomic_t poll_scheduled;
+       /* Monitor RT polling work control */
+       struct task_struct __rcu *rtpoll_task;
+       struct timer_list rtpoll_timer;
+       wait_queue_head_t rtpoll_wait;
+       atomic_t rtpoll_wakeup;
+       atomic_t rtpoll_scheduled;
 
        /* Protects data used by the monitor */
-       struct mutex trigger_lock;
-
-       /* Configured polling triggers */
-       struct list_head triggers;
-       u32 nr_triggers[NR_PSI_STATES - 1];
-       u32 poll_states;
-       u64 poll_min_period;
-
-       /* Total stall times at the start of monitor activation */
-       u64 polling_total[NR_PSI_STATES - 1];
-       u64 polling_next_update;
-       u64 polling_until;
+       struct mutex rtpoll_trigger_lock;
+
+       /* Configured RT polling triggers */
+       struct list_head rtpoll_triggers;
+       u32 rtpoll_nr_triggers[NR_PSI_STATES - 1];
+       u32 rtpoll_states;
+       u64 rtpoll_min_period;
+
+       /* Total stall times at the start of RT polling monitor activation */
+       u64 rtpoll_total[NR_PSI_STATES - 1];
+       u64 rtpoll_next_update;
+       u64 rtpoll_until;
 };
 
 #else /* CONFIG_PSI */
kernel/sched/psi.c +82 -82
index fe9269f1d2a4..a3d0b5cf797a 100644
@@ -189,14 +189,14 @@ static void group_init(struct psi_group *group)
        INIT_DELAYED_WORK(&group->avgs_work, psi_avgs_work);
        mutex_init(&group->avgs_lock);
        /* Init trigger-related members */
-       atomic_set(&group->poll_scheduled, 0);
-       mutex_init(&group->trigger_lock);
-       INIT_LIST_HEAD(&group->triggers);
-       group->poll_min_period = U32_MAX;
-       group->polling_next_update = ULLONG_MAX;
-       init_waitqueue_head(&group->poll_wait);
-       timer_setup(&group->poll_timer, poll_timer_fn, 0);
-       rcu_assign_pointer(group->poll_task, NULL);
+       atomic_set(&group->rtpoll_scheduled, 0);
+       mutex_init(&group->rtpoll_trigger_lock);
+       INIT_LIST_HEAD(&group->rtpoll_triggers);
+       group->rtpoll_min_period = U32_MAX;
+       group->rtpoll_next_update = ULLONG_MAX;
+       init_waitqueue_head(&group->rtpoll_wait);
+       timer_setup(&group->rtpoll_timer, poll_timer_fn, 0);
+       rcu_assign_pointer(group->rtpoll_task, NULL);
 }
 
 void __init psi_init(void)
@@ -440,11 +440,11 @@ static u64 update_triggers(struct psi_group *group, u64 now)
         * On subsequent updates, calculate growth deltas and let
         * watchers know when their specified thresholds are exceeded.
         */
-       list_for_each_entry(t, &group->triggers, node) {
+       list_for_each_entry(t, &group->rtpoll_triggers, node) {
                u64 growth;
                bool new_stall;
 
-               new_stall = group->polling_total[t->state] != total[t->state];
+               new_stall = group->rtpoll_total[t->state] != total[t->state];
 
                /* Check for stall activity or a previous threshold breach */
                if (!new_stall && !t->pending_event)
@@ -486,10 +486,10 @@ static u64 update_triggers(struct psi_group *group, u64 now)
        }
 
        if (update_total)
-               memcpy(group->polling_total, total,
-                               sizeof(group->polling_total));
+               memcpy(group->rtpoll_total, total,
+                               sizeof(group->rtpoll_total));
 
-       return now + group->poll_min_period;
+       return now + group->rtpoll_min_period;
 }
 
 static u64 update_averages(struct psi_group *group, u64 now)
@@ -582,53 +582,53 @@ static void init_triggers(struct psi_group *group, u64 now)
 {
        struct psi_trigger *t;
 
-       list_for_each_entry(t, &group->triggers, node)
+       list_for_each_entry(t, &group->rtpoll_triggers, node)
                window_reset(&t->win, now,
                                group->total[PSI_POLL][t->state], 0);
-       memcpy(group->polling_total, group->total[PSI_POLL],
-                  sizeof(group->polling_total));
-       group->polling_next_update = now + group->poll_min_period;
+       memcpy(group->rtpoll_total, group->total[PSI_POLL],
+                  sizeof(group->rtpoll_total));
+       group->rtpoll_next_update = now + group->rtpoll_min_period;
 }
 
 /* Schedule polling if it's not already scheduled or forced. */
-static void psi_schedule_poll_work(struct psi_group *group, unsigned long delay,
+static void psi_schedule_rtpoll_work(struct psi_group *group, unsigned long delay,
                                   bool force)
 {
        struct task_struct *task;
 
        /*
         * atomic_xchg should be called even when !force to provide a
-        * full memory barrier (see the comment inside psi_poll_work).
+        * full memory barrier (see the comment inside psi_rtpoll_work).
         */
-       if (atomic_xchg(&group->poll_scheduled, 1) && !force)
+       if (atomic_xchg(&group->rtpoll_scheduled, 1) && !force)
                return;
 
        rcu_read_lock();
 
-       task = rcu_dereference(group->poll_task);
+       task = rcu_dereference(group->rtpoll_task);
        /*
         * kworker might be NULL in case psi_trigger_destroy races with
         * psi_task_change (hotpath) which can't use locks
         */
        if (likely(task))
-               mod_timer(&group->poll_timer, jiffies + delay);
+               mod_timer(&group->rtpoll_timer, jiffies + delay);
        else
-               atomic_set(&group->poll_scheduled, 0);
+               atomic_set(&group->rtpoll_scheduled, 0);
 
        rcu_read_unlock();
 }
 
-static void psi_poll_work(struct psi_group *group)
+static void psi_rtpoll_work(struct psi_group *group)
 {
        bool force_reschedule = false;
        u32 changed_states;
        u64 now;
 
-       mutex_lock(&group->trigger_lock);
+       mutex_lock(&group->rtpoll_trigger_lock);
 
        now = sched_clock();
 
-       if (now > group->polling_until) {
+       if (now > group->rtpoll_until) {
                /*
                 * We are either about to start or might stop polling if no
                 * state change was recorded. Resetting poll_scheduled leaves
@@ -638,7 +638,7 @@ static void psi_poll_work(struct psi_group *group)
                 * should be negligible and polling_next_update still keeps
                 * updates correctly on schedule.
                 */
-               atomic_set(&group->poll_scheduled, 0);
+               atomic_set(&group->rtpoll_scheduled, 0);
                /*
                 * A task change can race with the poll worker that is supposed to
                 * report on it. To avoid missing events, ensure ordering between
@@ -667,9 +667,9 @@ static void psi_poll_work(struct psi_group *group)
 
        collect_percpu_times(group, PSI_POLL, &changed_states);
 
-       if (changed_states & group->poll_states) {
+       if (changed_states & group->rtpoll_states) {
                /* Initialize trigger windows when entering polling mode */
-               if (now > group->polling_until)
+               if (now > group->rtpoll_until)
                        init_triggers(group, now);
 
                /*
@@ -677,50 +677,50 @@ static void psi_poll_work(struct psi_group *group)
                 * minimum tracking window as long as monitor states are
                 * changing.
                 */
-               group->polling_until = now +
-                       group->poll_min_period * UPDATES_PER_WINDOW;
+               group->rtpoll_until = now +
+                       group->rtpoll_min_period * UPDATES_PER_WINDOW;
        }
 
-       if (now > group->polling_until) {
-               group->polling_next_update = ULLONG_MAX;
+       if (now > group->rtpoll_until) {
+               group->rtpoll_next_update = ULLONG_MAX;
                goto out;
        }
 
-       if (now >= group->polling_next_update)
-               group->polling_next_update = update_triggers(group, now);
+       if (now >= group->rtpoll_next_update)
+               group->rtpoll_next_update = update_triggers(group, now);
 
-       psi_schedule_poll_work(group,
-               nsecs_to_jiffies(group->polling_next_update - now) + 1,
+       psi_schedule_rtpoll_work(group,
+               nsecs_to_jiffies(group->rtpoll_next_update - now) + 1,
                force_reschedule);
 
 out:
-       mutex_unlock(&group->trigger_lock);
+       mutex_unlock(&group->rtpoll_trigger_lock);
 }
 
-static int psi_poll_worker(void *data)
+static int psi_rtpoll_worker(void *data)
 {
        struct psi_group *group = (struct psi_group *)data;
 
        sched_set_fifo_low(current);
 
        while (true) {
-               wait_event_interruptible(group->poll_wait,
-                               atomic_cmpxchg(&group->poll_wakeup, 1, 0) ||
+               wait_event_interruptible(group->rtpoll_wait,
+                               atomic_cmpxchg(&group->rtpoll_wakeup, 1, 0) ||
                                kthread_should_stop());
                if (kthread_should_stop())
                        break;
 
-               psi_poll_work(group);
+               psi_rtpoll_work(group);
        }
        return 0;
 }
 
 static void poll_timer_fn(struct timer_list *t)
 {
-       struct psi_group *group = from_timer(group, t, poll_timer);
+       struct psi_group *group = from_timer(group, t, rtpoll_timer);
 
-       atomic_set(&group->poll_wakeup, 1);
-       wake_up_interruptible(&group->poll_wait);
+       atomic_set(&group->rtpoll_wakeup, 1);
+       wake_up_interruptible(&group->rtpoll_wait);
 }
 
 static void record_times(struct psi_group_cpu *groupc, u64 now)
@@ -851,8 +851,8 @@ static void psi_group_change(struct psi_group *group, int cpu,
 
        write_seqcount_end(&groupc->seq);
 
-       if (state_mask & group->poll_states)
-               psi_schedule_poll_work(group, 1, false);
+       if (state_mask & group->rtpoll_states)
+               psi_schedule_rtpoll_work(group, 1, false);
 
        if (wake_clock && !delayed_work_pending(&group->avgs_work))
                schedule_delayed_work(&group->avgs_work, PSI_FREQ);
@@ -1005,8 +1005,8 @@ void psi_account_irqtime(struct task_struct *task, u32 delta)
 
                write_seqcount_end(&groupc->seq);
 
-               if (group->poll_states & (1 << PSI_IRQ_FULL))
-                       psi_schedule_poll_work(group, 1, false);
+               if (group->rtpoll_states & (1 << PSI_IRQ_FULL))
+                       psi_schedule_rtpoll_work(group, 1, false);
        } while ((group = group->parent));
 }
 #endif
@@ -1101,7 +1101,7 @@ void psi_cgroup_free(struct cgroup *cgroup)
        cancel_delayed_work_sync(&cgroup->psi->avgs_work);
        free_percpu(cgroup->psi->pcpu);
        /* All triggers must be removed by now */
-       WARN_ONCE(cgroup->psi->poll_states, "psi: trigger leak\n");
+       WARN_ONCE(cgroup->psi->rtpoll_states, "psi: trigger leak\n");
        kfree(cgroup->psi);
 }
 
@@ -1302,29 +1302,29 @@ struct psi_trigger *psi_trigger_create(struct psi_group *group,
        init_waitqueue_head(&t->event_wait);
        t->pending_event = false;
 
-       mutex_lock(&group->trigger_lock);
+       mutex_lock(&group->rtpoll_trigger_lock);
 
-       if (!rcu_access_pointer(group->poll_task)) {
+       if (!rcu_access_pointer(group->rtpoll_task)) {
                struct task_struct *task;
 
-               task = kthread_create(psi_poll_worker, group, "psimon");
+               task = kthread_create(psi_rtpoll_worker, group, "psimon");
                if (IS_ERR(task)) {
                        kfree(t);
-                       mutex_unlock(&group->trigger_lock);
+                       mutex_unlock(&group->rtpoll_trigger_lock);
                        return ERR_CAST(task);
                }
-               atomic_set(&group->poll_wakeup, 0);
+               atomic_set(&group->rtpoll_wakeup, 0);
                wake_up_process(task);
-               rcu_assign_pointer(group->poll_task, task);
+               rcu_assign_pointer(group->rtpoll_task, task);
        }
 
-       list_add(&t->node, &group->triggers);
-       group->poll_min_period = min(group->poll_min_period,
+       list_add(&t->node, &group->rtpoll_triggers);
+       group->rtpoll_min_period = min(group->rtpoll_min_period,
                div_u64(t->win.size, UPDATES_PER_WINDOW));
-       group->nr_triggers[t->state]++;
-       group->poll_states |= (1 << t->state);
+       group->rtpoll_nr_triggers[t->state]++;
+       group->rtpoll_states |= (1 << t->state);
 
-       mutex_unlock(&group->trigger_lock);
+       mutex_unlock(&group->rtpoll_trigger_lock);
 
        return t;
 }
@@ -1349,51 +1349,52 @@ void psi_trigger_destroy(struct psi_trigger *t)
         */
        wake_up_pollfree(&t->event_wait);
 
-       mutex_lock(&group->trigger_lock);
+       mutex_lock(&group->rtpoll_trigger_lock);
 
        if (!list_empty(&t->node)) {
                struct psi_trigger *tmp;
                u64 period = ULLONG_MAX;
 
                list_del(&t->node);
-               group->nr_triggers[t->state]--;
-               if (!group->nr_triggers[t->state])
-                       group->poll_states &= ~(1 << t->state);
+               group->rtpoll_nr_triggers[t->state]--;
+               if (!group->rtpoll_nr_triggers[t->state])
+                       group->rtpoll_states &= ~(1 << t->state);
                /* reset min update period for the remaining triggers */
-               list_for_each_entry(tmp, &group->triggers, node)
+               list_for_each_entry(tmp, &group->rtpoll_triggers, node)
                        period = min(period, div_u64(tmp->win.size,
                                        UPDATES_PER_WINDOW));
-               group->poll_min_period = period;
-               /* Destroy poll_task when the last trigger is destroyed */
-               if (group->poll_states == 0) {
-                       group->polling_until = 0;
+               group->rtpoll_min_period = period;
+               /* Destroy rtpoll_task when the last trigger is destroyed */
+               if (group->rtpoll_states == 0) {
+                       group->rtpoll_until = 0;
                        task_to_destroy = rcu_dereference_protected(
-                                       group->poll_task,
-                                       lockdep_is_held(&group->trigger_lock));
-                       rcu_assign_pointer(group->poll_task, NULL);
-                       del_timer(&group->poll_timer);
+                                       group->rtpoll_task,
+                                       lockdep_is_held(&group->rtpoll_trigger_lock));
+                       rcu_assign_pointer(group->rtpoll_task, NULL);
+                       del_timer(&group->rtpoll_timer);
                }
        }
 
-       mutex_unlock(&group->trigger_lock);
+       mutex_unlock(&group->rtpoll_trigger_lock);
 
        /*
-        * Wait for psi_schedule_poll_work RCU to complete its read-side
+        * Wait for psi_schedule_rtpoll_work RCU to complete its read-side
         * critical section before destroying the trigger and optionally the
-        * poll_task.
+        * rtpoll_task.
         */
        synchronize_rcu();
        /*
-        * Stop kthread 'psimon' after releasing trigger_lock to prevent a
-        * deadlock while waiting for psi_poll_work to acquire trigger_lock
+        * Stop kthread 'psimon' after releasing rtpoll_trigger_lock to prevent
+        * a deadlock while waiting for psi_rtpoll_work to acquire
+        * rtpoll_trigger_lock
         */
        if (task_to_destroy) {
                /*
                 * After the RCU grace period has expired, the worker
-                * can no longer be found through group->poll_task.
+                * can no longer be found through group->rtpoll_task.
                 */
                kthread_stop(task_to_destroy);
-               atomic_set(&group->poll_scheduled, 0);
+               atomic_set(&group->rtpoll_scheduled, 0);
        }
        kfree(t);
 }
--

2.34.1

#5 lore raw

PATCH 3/4 sched/psi: extract update_triggers side effect

In reply to Domenico Cerasuolo

The update of rtpoll_total inside update_triggers can be moved out of the function since changed_states has the same information as the update_total flag used in the function. Besides the simplification of the function, with the next patch it would become an unwanted side effect needed only for PSI_POLL.

---
 kernel/sched/psi.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
kernel/sched/psi.c +5 -15
index a3d0b5cf797a..476941c1cbea 100644
@@ -433,7 +433,6 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
 static u64 update_triggers(struct psi_group *group, u64 now)
 {
 	struct psi_trigger *t;
-	bool update_total = false;
 	u64 *total = group->total[PSI_POLL];
 
 	/*
@@ -456,14 +455,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
 		 * events without dropping any).
 		 */
 		if (new_stall) {
-			/*
-			 * Multiple triggers might be looking at the same state,
-			 * remember to update group->polling_total[] once we've
-			 * been through all of them. Also remember to extend the
-			 * polling time if we see new stall activity.
-			 */
-			update_total = true;
-
 			/* Calculate growth since last update */
 			growth = window_update(&t->win, now, total[t->state]);
 			if (!t->pending_event) {
@@ -484,11 +475,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
 		/* Reset threshold breach flag once event got generated */
 		t->pending_event = false;
 	}
-
-	if (update_total)
-		memcpy(group->rtpoll_total, total,
-				sizeof(group->rtpoll_total));
-
 	return now + group->rtpoll_min_period;
 }
 
@@ -686,8 +672,12 @@ static void psi_rtpoll_work(struct psi_group *group)
 		goto out;
 	}
 
-	if (now >= group->rtpoll_next_update)
+	if (now >= group->rtpoll_next_update) {
 		group->rtpoll_next_update = update_triggers(group, now);
+		if (changed_states & group->rtpoll_states)
+			memcpy(group->rtpoll_total, group->total[PSI_POLL],
+				   sizeof(group->rtpoll_total));
+	}
 
 	psi_schedule_rtpoll_work(group,
 		nsecs_to_jiffies(group->rtpoll_next_update - now) + 1,
Signature · 1 line
2.34.1
#6 lore raw

Re: [PATCH 3/4] sched/psi: extract update_triggers side effect

Quoted 6 lines · Domenico Cerasuolo

The update of rtpoll_total inside update_triggers can be moved out of the function since changed_states has the same information as the update_total flag used in the function. Besides the simplification of the function, with the next patch it would become an unwanted side effect needed only for PSI_POLL.

(changed_states & group->rtpoll_states) and update_total flag are not really equivalent. update_total flag depends on the difference between group->polling_total[state] and group->total[PSI_POLL][state] while changed_states depends on the difference between groupc->times and groupc->times_prev. groupc->times_prev is updated every time collect_percpu_times() is called and there are 3 places where that
happens: from psi_avgs_work(), from psi_poll_work() and from psi_show(). group->polling_total[state] is updated only from psi_poll_work(). Therefore the deltas between these values might not always be in-sync.

Consider the following sequence as an example:

psi_poll_work()
...
psi_avgs_work()/psi_show()
collect_percpu_times() // we detect a change in a monitored state
...
psi_poll_work()
collect_percpu_times() // this time no change in monitored states update_triggers() // group->polling_total[state] !=
group->total[PSI_POLL][state]

In the last psi_poll_work() collect_percpu_times() recorded no change in monitored states, so (changed_states & group->rtpoll_states) == 0, however since the last time psi_poll_work() was called there was actually a change in monitored states recorded by the first collect_percpu_times(), therefore (group->polling_total[t->state] != total[t->state]) and we should update the totals. With your change we will miss that update.

I think you can easily fix that by introducing update_triggers as an output parameter in window_update() like this:

static u64 window_update(struct psi_window *win, u64 now, u64 value,

bool *update_triggers) {
    *update_total = false;
...
    if (new_stall) {
        *update_total = true;

...
}

static void psi_rtpoll_work(struct psi_group *group) {
+ bool update_triggers;
...
- if (now >= group->rtpoll_next_update)

+       if (now >= group->rtpoll_next_update) {
                group->rtpoll_next_update = update_triggers(group,

now, &update_triggers);
+ if (update_triggers)
+ memcpy(group->rtpoll_total, group->total[PSI_POLL],
+ sizeof(group->rtpoll_total));
+ }
}

Quoted 63 lines
---
 kernel/sched/psi.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
kernel/sched/psi.c +5 -16
index a3d0b5cf797a..476941c1cbea 100644
@@ -433,7 +433,6 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
 static u64 update_triggers(struct psi_group *group, u64 now)
 {
        struct psi_trigger *t;
-       bool update_total = false;
        u64 *total = group->total[PSI_POLL];
 
        /*
@@ -456,14 +455,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
                 * events without dropping any).
                 */
                if (new_stall) {
-                       /*
-                        * Multiple triggers might be looking at the same state,
-                        * remember to update group->polling_total[] once we've
-                        * been through all of them. Also remember to extend the
-                        * polling time if we see new stall activity.
-                        */
-                       update_total = true;
-
                        /* Calculate growth since last update */
                        growth = window_update(&t->win, now, total[t->state]);
                        if (!t->pending_event) {
@@ -484,11 +475,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
                /* Reset threshold breach flag once event got generated */
                t->pending_event = false;
        }
-
-       if (update_total)
-               memcpy(group->rtpoll_total, total,
-                               sizeof(group->rtpoll_total));
-
        return now + group->rtpoll_min_period;
 }
 
@@ -686,8 +672,12 @@ static void psi_rtpoll_work(struct psi_group *group)
                goto out;
        }
 
-       if (now >= group->rtpoll_next_update)
+       if (now >= group->rtpoll_next_update) {
                group->rtpoll_next_update = update_triggers(group, now);
+               if (changed_states & group->rtpoll_states)
+                       memcpy(group->rtpoll_total, group->total[PSI_POLL],
+                                  sizeof(group->rtpoll_total));
+       }
 
        psi_schedule_rtpoll_work(group,
                nsecs_to_jiffies(group->rtpoll_next_update - now) + 1,
--

2.34.1

A message that is not in the archive (sent off-list or not yet received): CA+CLi1g=70ot=YFL+xug3jC4OXG727NGo+NXxmC45WcwaFpo8g@mail.gmail.com

#8 lore raw

Re: [PATCH 3/4] sched/psi: extract update_triggers side effect

Quoted 2 lines · Domenico Cerasuolo

Hi Suren, thanks for all the feedback! This makes sense, I only have one doubt, if we set update_total flag to window_update() and update_triggers(), that flag would be ignored when the caller is psi_avgs_work(), this would be happening in the next patch in the set.

I don't see why the update_triggers part should be conceptually different between RT and unprivileged triggers. Could you please explain?

Quoted 134 lines

What do you think if I just remove this change from the patchset and then work on a solution after the iterations on the main change are completed? This was in fact just an attempt to clean up. I'll apply your suggested changes on the other patches, wait a bit for comments from someone else and then send V2.

Quoted 130 lines · Suren Baghdasaryan
Quoted 6 lines · Domenico Cerasuolo

The update of rtpoll_total inside update_triggers can be moved out of the function since changed_states has the same information as the update_total flag used in the function. Besides the simplification of the function, with the next patch it would become an unwanted side effect needed only for PSI_POLL.

(changed_states & group->rtpoll_states) and update_total flag are not really equivalent. update_total flag depends on the difference between group->polling_total[state] and group->total[PSI_POLL][state] while changed_states depends on the difference between groupc->times and groupc->times_prev. groupc->times_prev is updated every time collect_percpu_times() is called and there are 3 places where that
happens: from psi_avgs_work(), from psi_poll_work() and from psi_show(). group->polling_total[state] is updated only from psi_poll_work(). Therefore the deltas between these values might not always be in-sync.

Consider the following sequence as an example:

psi_poll_work()
...
psi_avgs_work()/psi_show()
collect_percpu_times() // we detect a change in a monitored state
...
psi_poll_work()
collect_percpu_times() // this time no change in monitored states update_triggers() // group->polling_total[state] !=
group->total[PSI_POLL][state]

In the last psi_poll_work() collect_percpu_times() recorded no change in monitored states, so (changed_states & group->rtpoll_states) == 0, however since the last time psi_poll_work() was called there was actually a change in monitored states recorded by the first collect_percpu_times(), therefore (group->polling_total[t->state] != total[t->state]) and we should update the totals. With your change we will miss that update.

I think you can easily fix that by introducing update_triggers as an output parameter in window_update() like this:

static u64 window_update(struct psi_window *win, u64 now, u64 value,

bool *update_triggers) {
    *update_total = false;
...
    if (new_stall) {
        *update_total = true;

...
}

static void psi_rtpoll_work(struct psi_group *group) {

kernel/sched/psi.c +2 -1
+       bool update_triggers;
...
-       if (now >= group->rtpoll_next_update)
+       if (now >= group->rtpoll_next_update) {
                group->rtpoll_next_update = update_triggers(group,

now, &update_triggers);

kernel/sched/psi.c +4 -0
+               if (update_triggers)
+                       memcpy(group->rtpoll_total, group->total[PSI_POLL],
+                                  sizeof(group->rtpoll_total));
+       }

}

Quoted 63 lines
---
 kernel/sched/psi.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
kernel/sched/psi.c +5 -16
index a3d0b5cf797a..476941c1cbea 100644
@@ -433,7 +433,6 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
 static u64 update_triggers(struct psi_group *group, u64 now)
 {
        struct psi_trigger *t;
-       bool update_total = false;
        u64 *total = group->total[PSI_POLL];
 
        /*
@@ -456,14 +455,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
                 * events without dropping any).
                 */
                if (new_stall) {
-                       /*
-                        * Multiple triggers might be looking at the same state,
-                        * remember to update group->polling_total[] once we've
-                        * been through all of them. Also remember to extend the
-                        * polling time if we see new stall activity.
-                        */
-                       update_total = true;
-
                        /* Calculate growth since last update */
                        growth = window_update(&t->win, now, total[t->state]);
                        if (!t->pending_event) {
@@ -484,11 +475,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
                /* Reset threshold breach flag once event got generated */
                t->pending_event = false;
        }
-
-       if (update_total)
-               memcpy(group->rtpoll_total, total,
-                               sizeof(group->rtpoll_total));
-
        return now + group->rtpoll_min_period;
 }
 
@@ -686,8 +672,12 @@ static void psi_rtpoll_work(struct psi_group *group)
                goto out;
        }
 
-       if (now >= group->rtpoll_next_update)
+       if (now >= group->rtpoll_next_update) {
                group->rtpoll_next_update = update_triggers(group, now);
+               if (changed_states & group->rtpoll_states)
+                       memcpy(group->rtpoll_total, group->total[PSI_POLL],
+                                  sizeof(group->rtpoll_total));
+       }
 
        psi_schedule_rtpoll_work(group,
                nsecs_to_jiffies(group->rtpoll_next_update - now) + 1,
--

2.34.1

A message that is not in the archive (sent off-list or not yet received): CA+CLi1gjKFFgoeHQs-sNn1knqk1w9rb73kaOqP9z8TUwwiqqFQ@mail.gmail.com

#10 lore raw

Re: [PATCH 3/4] sched/psi: extract update_triggers side effect

Quoted 4 lines · Domenico Cerasuolo

I'm not suggesting that update_triggers should be different, I agree that they should behave the same for both types of trigger.
The problem is that if we extract the update_total information out of update_triggers, that information will be ignored by psi_avgs_work because avg_total is always updated in update_averages, only psi_poll_work would use it to copy the total to polling_total. If this is the only alternative to having if (update_total && aggregator == PSI_POLL) inside update_triggers, I'll add the argument to update_triggers, I'm just wondering if there could be another alternative.

I suggest you post the V2 with suggested changes and this approach and it will be easier to decide whether this can be improved further. Also, please do not top-post (read through
https://kernelnewbies.org/mailinglistguidelines for more hints). Thanks,
Suren.

Quoted 146 lines · Suren Baghdasaryan
Quoted 144 lines
Quoted 2 lines · Domenico Cerasuolo

Hi Suren, thanks for all the feedback! This makes sense, I only have one doubt, if we set update_total flag to window_update() and update_triggers(), that flag would be ignored when the caller is psi_avgs_work(), this would be happening in the next patch in the set.

I don't see why the update_triggers part should be conceptually different between RT and unprivileged triggers. Could you please explain?

Quoted 134 lines

What do you think if I just remove this change from the patchset and then work on a solution after the iterations on the main change are completed? This was in fact just an attempt to clean up. I'll apply your suggested changes on the other patches, wait a bit for comments from someone else and then send V2.

Quoted 130 lines · Suren Baghdasaryan
Quoted 6 lines · Domenico Cerasuolo

The update of rtpoll_total inside update_triggers can be moved out of the function since changed_states has the same information as the update_total flag used in the function. Besides the simplification of the function, with the next patch it would become an unwanted side effect needed only for PSI_POLL.

(changed_states & group->rtpoll_states) and update_total flag are not really equivalent. update_total flag depends on the difference between group->polling_total[state] and group->total[PSI_POLL][state] while changed_states depends on the difference between groupc->times and groupc->times_prev. groupc->times_prev is updated every time collect_percpu_times() is called and there are 3 places where that
happens: from psi_avgs_work(), from psi_poll_work() and from psi_show(). group->polling_total[state] is updated only from psi_poll_work(). Therefore the deltas between these values might not always be in-sync.

Consider the following sequence as an example:

psi_poll_work()
...
psi_avgs_work()/psi_show()
collect_percpu_times() // we detect a change in a monitored state
...
psi_poll_work()
collect_percpu_times() // this time no change in monitored states update_triggers() // group->polling_total[state] !=
group->total[PSI_POLL][state]

In the last psi_poll_work() collect_percpu_times() recorded no change in monitored states, so (changed_states & group->rtpoll_states) == 0, however since the last time psi_poll_work() was called there was actually a change in monitored states recorded by the first collect_percpu_times(), therefore (group->polling_total[t->state] != total[t->state]) and we should update the totals. With your change we will miss that update.

I think you can easily fix that by introducing update_triggers as an output parameter in window_update() like this:

static u64 window_update(struct psi_window *win, u64 now, u64 value,

bool *update_triggers) {
    *update_total = false;
...
    if (new_stall) {
        *update_total = true;

...
}

static void psi_rtpoll_work(struct psi_group *group) {

kernel/sched/psi.c +2 -1
+       bool update_triggers;
...
-       if (now >= group->rtpoll_next_update)
+       if (now >= group->rtpoll_next_update) {
                group->rtpoll_next_update = update_triggers(group,

now, &update_triggers);

kernel/sched/psi.c +4 -0
+               if (update_triggers)
+                       memcpy(group->rtpoll_total, group->total[PSI_POLL],
+                                  sizeof(group->rtpoll_total));
+       }

}

Quoted 63 lines
---
 kernel/sched/psi.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)
kernel/sched/psi.c +5 -16
index a3d0b5cf797a..476941c1cbea 100644
@@ -433,7 +433,6 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
 static u64 update_triggers(struct psi_group *group, u64 now)
 {
        struct psi_trigger *t;
-       bool update_total = false;
        u64 *total = group->total[PSI_POLL];
 
        /*
@@ -456,14 +455,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
                 * events without dropping any).
                 */
                if (new_stall) {
-                       /*
-                        * Multiple triggers might be looking at the same state,
-                        * remember to update group->polling_total[] once we've
-                        * been through all of them. Also remember to extend the
-                        * polling time if we see new stall activity.
-                        */
-                       update_total = true;
-
                        /* Calculate growth since last update */
                        growth = window_update(&t->win, now, total[t->state]);
                        if (!t->pending_event) {
@@ -484,11 +475,6 @@ static u64 update_triggers(struct psi_group *group, u64 now)
                /* Reset threshold breach flag once event got generated */
                t->pending_event = false;
        }
-
-       if (update_total)
-               memcpy(group->rtpoll_total, total,
-                               sizeof(group->rtpoll_total));
-
        return now + group->rtpoll_min_period;
 }
 
@@ -686,8 +672,12 @@ static void psi_rtpoll_work(struct psi_group *group)
                goto out;
        }
 
-       if (now >= group->rtpoll_next_update)
+       if (now >= group->rtpoll_next_update) {
                group->rtpoll_next_update = update_triggers(group, now);
+               if (changed_states & group->rtpoll_states)
+                       memcpy(group->rtpoll_total, group->total[PSI_POLL],
+                                  sizeof(group->rtpoll_total));
+       }
 
        psi_schedule_rtpoll_work(group,
                nsecs_to_jiffies(group->rtpoll_next_update - now) + 1,
--

2.34.1

#11 lore raw

PATCH 4/4 sched/psi: allow unprivileged polling of N*2s period

In reply to Domenico Cerasuolo

PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average pressures aggregated every 2s. The other is creating a pollable fd for a specific resource and cgroup.

The trigger creation requires CAP_SYS_RESOURCE, and gives the possibility to pick specific time window and threshold, spawing an RT thread to aggregate the data.

Systemd would like to provide containers the option to monitor pressure on their own cgroup and sub-cgroups. For example, if systemd launches a container that itself then launches services, the container should have the ability to poll() for pressure in individual services. But neither the container nor the services are privileged.

This patch implements a mechanism to allow unprivileged users to create pressure triggers. The difference with privileged triggers creation is that unprivileged ones must have a time window that's a multiple of 2s. This is so that we can avoid unrestricted spawning of rt threads, and use instead the same aggregation mechanism done for the averages, which runs indipendently of any triggers.

---
 Documentation/accounting/psi.rst |   4 ++
 include/linux/psi.h              |   2 +-
 include/linux/psi_types.h        |   7 +++
 kernel/cgroup/cgroup.c           |   2 +-
 kernel/sched/psi.c               | 105 ++++++++++++++++++++-----------
 5 files changed, 83 insertions(+), 37 deletions(-)
Documentation/accounting/psi.rst +4 -0
index 5e40b3f437f9..df6062eb3abb 100644
@@ -105,6 +105,10 @@ prevent overly frequent polling. Max limit is chosen as a high enough number
 after which monitors are most likely not needed and psi averages can be used
 instead.
 
+Unprivileged users can also create monitors, with the only limitation that the
+window size must be a multiple of 2s, in order to prevent excessive resource
+usage.
+
 When activated, psi monitor stays active for at least the duration of one
 tracking window to avoid repeated activations/deactivations when system is
 bouncing in and out of the stall state.
include/linux/psi.h +1 -1
index b029a847def1..ab26200c2803 100644
@@ -24,7 +24,7 @@ void psi_memstall_leave(unsigned long *flags);
 
 int psi_show(struct seq_file *s, struct psi_group *group, enum psi_res res);
 struct psi_trigger *psi_trigger_create(struct psi_group *group,
-			char *buf, enum psi_res res);
+			char *buf, enum psi_res res, struct file *file);
 void psi_trigger_destroy(struct psi_trigger *t);
 
 __poll_t psi_trigger_poll(void **trigger_ptr, struct file *file,
include/linux/psi_types.h +7 -0
index 1819afa8b198..e439f411c23b 100644
@@ -151,6 +151,9 @@ struct psi_trigger {
 
 	/* Deferred event(s) from previous ratelimit window */
 	bool pending_event;
+
+	/* Used to differentiate destruction action*/
+	enum psi_aggregators aggregator;
 };
 
 struct psi_group {
@@ -171,6 +174,10 @@ struct psi_group {
 	/* Aggregator work control */
 	struct delayed_work avgs_work;
 
+	/* Unprivileged triggers against N*PSI_FREQ windows */
+	struct list_head triggers;
+	u32 nr_triggers[NR_PSI_STATES - 1];
+
 	/* Total stall times and sampled pressure averages */
 	u64 total[NR_PSI_AGGREGATORS][NR_PSI_STATES - 1];
 	unsigned long avg[NR_PSI_STATES - 1][3];
kernel/cgroup/cgroup.c +1 -1
index 935e8121b21e..dead36969bba 100644
@@ -3761,7 +3761,7 @@ static ssize_t pressure_write(struct kernfs_open_file *of, char *buf,
 	}
 
 	psi = cgroup_psi(cgrp);
-	new = psi_trigger_create(psi, buf, res);
+	new = psi_trigger_create(psi, buf, res, of->file);
 	if (IS_ERR(new)) {
 		cgroup_put(cgrp);
 		return PTR_ERR(new);
kernel/sched/psi.c +70 -35

210 lines not on this page · raw message

Signature · 1 line
2.34.1
#12 lore raw

Re: [PATCH 4/4] sched/psi: allow unprivileged polling of N*2s period

Quoted 16 lines · Domenico Cerasuolo

PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average pressures aggregated every 2s. The other is creating a pollable fd for a specific resource and cgroup.

The trigger creation requires CAP_SYS_RESOURCE, and gives the possibility to pick specific time window and threshold, spawing an RT thread to aggregate the data.

Systemd would like to provide containers the option to monitor pressure on their own cgroup and sub-cgroups. For example, if systemd launches a container that itself then launches services, the container should have the ability to poll() for pressure in individual services. But neither the container nor the services are privileged.

Quoted 6 lines

This patch implements a mechanism to allow unprivileged users to create pressure triggers. The difference with privileged triggers creation is that unprivileged ones must have a time window that's a multiple of 2s. This is so that we can avoid unrestricted spawning of rt threads, and use instead the same aggregation mechanism done for the averages, which runs indipendently of any triggers.

s/indipendently/independently

Quoted 108 lines
---
 Documentation/accounting/psi.rst |   4 ++
 include/linux/psi.h              |   2 +-
 include/linux/psi_types.h        |   7 +++
 kernel/cgroup/cgroup.c           |   2 +-
 kernel/sched/psi.c               | 105 ++++++++++++++++++++-----------
 5 files changed, 83 insertions(+), 37 deletions(-)
Documentation/accounting/psi.rst +4 -0
index 5e40b3f437f9..df6062eb3abb 100644
@@ -105,6 +105,10 @@ prevent overly frequent polling. Max limit is chosen as a high enough number
 after which monitors are most likely not needed and psi averages can be used
 instead.
 
+Unprivileged users can also create monitors, with the only limitation that the
+window size must be a multiple of 2s, in order to prevent excessive resource
+usage.
+
 When activated, psi monitor stays active for at least the duration of one
 tracking window to avoid repeated activations/deactivations when system is
 bouncing in and out of the stall state.
include/linux/psi.h +1 -1
index b029a847def1..ab26200c2803 100644
@@ -24,7 +24,7 @@ void psi_memstall_leave(unsigned long *flags);
 
 int psi_show(struct seq_file *s, struct psi_group *group, enum psi_res res);
 struct psi_trigger *psi_trigger_create(struct psi_group *group,
-                       char *buf, enum psi_res res);
+                       char *buf, enum psi_res res, struct file *file);
 void psi_trigger_destroy(struct psi_trigger *t);
 
 __poll_t psi_trigger_poll(void **trigger_ptr, struct file *file,
include/linux/psi_types.h +7 -0
index 1819afa8b198..e439f411c23b 100644
@@ -151,6 +151,9 @@ struct psi_trigger {
 
        /* Deferred event(s) from previous ratelimit window */
        bool pending_event;
+
+       /* Used to differentiate destruction action*/
+       enum psi_aggregators aggregator;
 };
 
 struct psi_group {
@@ -171,6 +174,10 @@ struct psi_group {
        /* Aggregator work control */
        struct delayed_work avgs_work;
 
+       /* Unprivileged triggers against N*PSI_FREQ windows */
+       struct list_head triggers;
+       u32 nr_triggers[NR_PSI_STATES - 1];
+
        /* Total stall times and sampled pressure averages */
        u64 total[NR_PSI_AGGREGATORS][NR_PSI_STATES - 1];
        unsigned long avg[NR_PSI_STATES - 1][3];
kernel/cgroup/cgroup.c +1 -1
index 935e8121b21e..dead36969bba 100644
@@ -3761,7 +3761,7 @@ static ssize_t pressure_write(struct kernfs_open_file *of, char *buf,
        }
 
        psi = cgroup_psi(cgrp);
-       new = psi_trigger_create(psi, buf, res);
+       new = psi_trigger_create(psi, buf, res, of->file);
        if (IS_ERR(new)) {
                cgroup_put(cgrp);
                return PTR_ERR(new);
kernel/sched/psi.c +7 -2
index 476941c1cbea..fde91aa4e55f 100644
@@ -186,9 +186,9 @@ static void group_init(struct psi_group *group)
                seqcount_init(&per_cpu_ptr(group->pcpu, cpu)->seq);
        group->avg_last_update = sched_clock();
        group->avg_next_update = group->avg_last_update + psi_period;
-       INIT_DELAYED_WORK(&group->avgs_work, psi_avgs_work);
        mutex_init(&group->avgs_lock);
-       /* Init trigger-related members */
+
+       /* Init rtpoll trigger-related members */
        atomic_set(&group->rtpoll_scheduled, 0);
        mutex_init(&group->rtpoll_trigger_lock);
        INIT_LIST_HEAD(&group->rtpoll_triggers);
@@ -197,6 +197,11 @@ static void group_init(struct psi_group *group)
        init_waitqueue_head(&group->rtpoll_wait);
        timer_setup(&group->rtpoll_timer, poll_timer_fn, 0);
        rcu_assign_pointer(group->rtpoll_task, NULL);
+
+       /* Init avg trigger-related members */
+       INIT_LIST_HEAD(&group->triggers);
+       memset(group->nr_triggers, 0, sizeof(group->nr_triggers));
+       INIT_DELAYED_WORK(&group->avgs_work, psi_avgs_work);
 }
 
 void __init psi_init(void)
@@ -430,20 +435,23 @@ static u64 window_update(struct psi_window *win, u64 now, u64 value)
        return growth;
 }

kernel/sched/psi.c static u64 window_update(struct psi_window *win, u64 now, u64 value) · line 444

Quoted 10 lines
kernel/sched/psi.c +5 -2
 
-static u64 update_triggers(struct psi_group *group, u64 now)
+static u64 update_triggers(struct psi_group *group, u64 now, enum psi_aggregators aggregator)
 {
        struct psi_trigger *t;
-       u64 *total = group->total[PSI_POLL];
+       u64 *total = group->total[aggregator];
+       struct list_head *triggers = aggregator == PSI_AVGS ? &group->triggers
+                       : &group->rtpoll_triggers;
+       u64 *aggregator_total = aggregator == PSI_AVGS ? group->avg_total : group->rtpoll_total;

I think if you follow my suggestion in patch#2 you can do:

struct trigger_info* tinfo = group->trig_info[aggregator];

and use that instead of the above if/else conditions.

Quoted 138 lines
kernel/sched/psi.c +37 -21
        /*
         * On subsequent updates, calculate growth deltas and let
         * watchers know when their specified thresholds are exceeded.
         */
-       list_for_each_entry(t, &group->rtpoll_triggers, node) {
+       list_for_each_entry(t, triggers, node) {
                u64 growth;
                bool new_stall;
 
-               new_stall = group->rtpoll_total[t->state] != total[t->state];
+               new_stall = aggregator_total[t->state] != total[t->state];
 
                /* Check for stall activity or a previous threshold breach */
                if (!new_stall && !t->pending_event)
@@ -553,8 +561,10 @@ static void psi_avgs_work(struct work_struct *work)
         * Once restarted, we'll catch up the running averages in one
         * go - see calc_avgs() and missed_periods.
         */
-       if (now >= group->avg_next_update)
+       if (now >= group->avg_next_update) {
+               update_triggers(group, now, PSI_AVGS);
                group->avg_next_update = update_averages(group, now);
+       }
 
        if (changed_states & PSI_STATE_RESCHEDULE) {
                schedule_delayed_work(dwork, nsecs_to_jiffies(
@@ -571,9 +581,17 @@ static void init_triggers(struct psi_group *group, u64 now)
        list_for_each_entry(t, &group->rtpoll_triggers, node)
                window_reset(&t->win, now,
                                group->total[PSI_POLL][t->state], 0);
+
+       list_for_each_entry(t, &group->triggers, node)
+               window_reset(&t->win, now,
+                               group->total[PSI_AVGS][t->state], 0);
+
        memcpy(group->rtpoll_total, group->total[PSI_POLL],
                   sizeof(group->rtpoll_total));
        group->rtpoll_next_update = now + group->rtpoll_min_period;
+
+       memcpy(group->avg_total, group->total[PSI_AVGS],
+                  sizeof(group->avg_total));
 }
 
 /* Schedule polling if it's not already scheduled or forced. */
@@ -673,7 +691,7 @@ static void psi_rtpoll_work(struct psi_group *group)
        }
 
        if (now >= group->rtpoll_next_update) {
-               group->rtpoll_next_update = update_triggers(group, now);
+               group->rtpoll_next_update = update_triggers(group, now, PSI_POLL);
                if (changed_states & group->rtpoll_states)
                        memcpy(group->rtpoll_total, group->total[PSI_POLL],
                                   sizeof(group->rtpoll_total));
@@ -1243,16 +1261,19 @@ int psi_show(struct seq_file *m, struct psi_group *group, enum psi_res res)
 }
 
 struct psi_trigger *psi_trigger_create(struct psi_group *group,
-                       char *buf, enum psi_res res)
+                       char *buf, enum psi_res res, struct file *file)
 {
        struct psi_trigger *t;
        enum psi_states state;
        u32 threshold_us;
+       bool privileged;
        u32 window_us;
 
        if (static_branch_likely(&psi_disabled))
                return ERR_PTR(-EOPNOTSUPP);
 
+       privileged = cap_raised(file->f_cred->cap_effective, CAP_SYS_RESOURCE);
+
        if (sscanf(buf, "some %u %u", &threshold_us, &window_us) == 2)
                state = PSI_IO_SOME + res * 2;
        else if (sscanf(buf, "full %u %u", &threshold_us, &window_us) == 2)
@@ -1272,6 +1293,13 @@ struct psi_trigger *psi_trigger_create(struct psi_group *group,
                window_us > WINDOW_MAX_US)
                return ERR_PTR(-EINVAL);
 
+       /*
+        * Unprivileged users can only use 2s windows so that averages aggregation
+        * work is used, and no RT threads need to be spawned.
+        */
+       if (!privileged && window_us % 2000000)
+               return ERR_PTR(-EINVAL);
+
        /* Check threshold */
        if (threshold_us == 0 || threshold_us > window_us)
                return ERR_PTR(-EINVAL);
@@ -1291,10 +1319,11 @@ struct psi_trigger *psi_trigger_create(struct psi_group *group,
        t->last_event_time = 0;
        init_waitqueue_head(&t->event_wait);
        t->pending_event = false;
+       t->aggregator = privileged ? PSI_POLL : PSI_AVGS;
 
        mutex_lock(&group->rtpoll_trigger_lock);
 
-       if (!rcu_access_pointer(group->rtpoll_task)) {
+       if (privileged && !rcu_access_pointer(group->rtpoll_task)) {
                struct task_struct *task;
 
                task = kthread_create(psi_rtpoll_worker, group, "psimon");
@@ -1308,11 +1337,16 @@ struct psi_trigger *psi_trigger_create(struct psi_group *group,
                rcu_assign_pointer(group->rtpoll_task, task);
        }
 
-       list_add(&t->node, &group->rtpoll_triggers);
-       group->rtpoll_min_period = min(group->rtpoll_min_period,
-               div_u64(t->win.size, UPDATES_PER_WINDOW));
-       group->rtpoll_nr_triggers[t->state]++;
-       group->rtpoll_states |= (1 << t->state);
+       if (privileged) {
+               list_add(&t->node, &group->rtpoll_triggers);
+               group->rtpoll_min_period = min(group->rtpoll_min_period,
+                       div_u64(t->win.size, UPDATES_PER_WINDOW));
+               group->rtpoll_nr_triggers[t->state]++;
+               group->rtpoll_states |= (1 << t->state);
+       } else {
+               list_add(&t->node, &group->triggers);
+               group->nr_triggers[t->state]++;
+       }
 
        mutex_unlock(&group->rtpoll_trigger_lock);
 
@@ -1346,22 +1380,26 @@ void psi_trigger_destroy(struct psi_trigger *t)
                u64 period = ULLONG_MAX;
 
                list_del(&t->node);
-               group->rtpoll_nr_triggers[t->state]--;
-               if (!group->rtpoll_nr_triggers[t->state])
-                       group->rtpoll_states &= ~(1 << t->state);
-               /* reset min update period for the remaining triggers */
-               list_for_each_entry(tmp, &group->rtpoll_triggers, node)
-                       period = min(period, div_u64(tmp->win.size,
-                                       UPDATES_PER_WINDOW));
-               group->rtpoll_min_period = period;
-               /* Destroy rtpoll_task when the last trigger is destroyed */
-               if (group->rtpoll_states == 0) {

kernel/sched/psi.c void psi_trigger_destroy(struct psi_trigger *t) · line 1386

Quoted 10 lines
kernel/sched/psi.c +4 -6
-                       group->rtpoll_until = 0;
-                       task_to_destroy = rcu_dereference_protected(
-                                       group->rtpoll_task,
-                                       lockdep_is_held(&group->rtpoll_trigger_lock));
-                       rcu_assign_pointer(group->rtpoll_task, NULL);
-                       del_timer(&group->rtpoll_timer);
+               if (t->aggregator == PSI_AVGS) {
+                       group->nr_triggers[t->state]--;
+               } else {
+                       group->rtpoll_nr_triggers[t->state]--;

Same here. This can be:

group->trig_info[t->aggregator].nr_triggers[t->state]--; if (t->aggregator == PSI_AVGS)

    return;

// original code for PSI_POLL triggers

Quoted 20 lines
kernel/sched/psi.c +16 -0
+                       if (!group->rtpoll_nr_triggers[t->state])
+                               group->rtpoll_states &= ~(1 << t->state);
+                       /* reset min update period for the remaining triggers */
+                       list_for_each_entry(tmp, &group->rtpoll_triggers, node)
+                               period = min(period, div_u64(tmp->win.size,
+                                               UPDATES_PER_WINDOW));
+                       group->rtpoll_min_period = period;
+                       /* Destroy rtpoll_task when the last trigger is destroyed */
+                       if (group->rtpoll_states == 0) {
+                               group->rtpoll_until = 0;
+                               task_to_destroy = rcu_dereference_protected(
+                                               group->rtpoll_task,
+                                               lockdep_is_held(&group->rtpoll_trigger_lock));
+                               rcu_assign_pointer(group->rtpoll_task, NULL);
+                               del_timer(&group->rtpoll_timer);
+                       }
                }
        }
 

kernel/sched/psi.c static int psi_cpu_show(struct seq_file *m, void *v) · line 1470

Quoted 8 lines
kernel/sched/psi.c +0 -3
@@ -1428,9 +1466,6 @@ static int psi_cpu_show(struct seq_file *m, void *v)
 
 static int psi_open(struct file *file, int (*psi_show)(struct seq_file *, void *))
 {
-       if (file->f_mode & FMODE_WRITE && !capable(CAP_SYS_RESOURCE))
-               return -EPERM;
-
        return single_open(file, psi_show, NULL);
 }

Here you can eliminate psi_open() completely and use single_open() directly.

Quoted 13 lines
kernel/sched/psi.c +1 -2
@@ -1480,7 +1515,7 @@ static ssize_t psi_write(struct file *file, const char __user *user_buf,
                return -EBUSY;
        }
 
-       new = psi_trigger_create(&psi_system, buf, res);
+       new = psi_trigger_create(&psi_system, buf, res, file);
        if (IS_ERR(new)) {
                mutex_unlock(&seq->lock);
                return PTR_ERR(new);
--

2.34.1

#13 lore raw
In reply to Domenico Cerasuolo
Quoted 10 lines · Domenico Cerasuolo

PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average pressures aggregated every 2s. The other is creating a pollable fd for a specific resource and cgroup.

The trigger creation requires CAP_SYS_RESOURCE, and gives the possibility to pick specific time window and threshold, spawing an RT thread to aggregate the data.

Quoted 5 lines

Systemd would like to provide containers the option to monitor pressure on their own cgroup and sub-cgroups. For example, if systemd launches a container that itself then launches services, the container should have the ability to poll() for pressure in individual services. But neither the container nor the services are privileged.

This sounds like an interesting usecase. I'll need to take a closer look once I'm back from vacation later this week. Thanks!

Quoted 20 lines

The series is implemented in 4 steps in order to reduce the noise of the change.

Domenico Cerasuolo (4):
sched/psi: rearrange polling code in preparation sched/psi: rename existing poll members in preparation sched/psi: extract update_triggers side effect sched/psi: allow unprivileged polling of N*2s period

 Documentation/accounting/psi.rst |   4 +
 include/linux/psi.h              |   2 +-
 include/linux/psi_types.h        |  43 ++--
 kernel/cgroup/cgroup.c           |   2 +-
 kernel/sched/psi.c               | 412 ++++++++++++++++---------------
 5 files changed, 250 insertions(+), 213 deletions(-)

--
2.34.1

maintainer
#14 lore raw
Quoted 18 lines · Suren Baghdasaryan
Quoted 10 lines · Domenico Cerasuolo

PSI offers 2 mechanisms to get information about a specific resource pressure. One is reading from /proc/pressure/<resource>, which gives average pressures aggregated every 2s. The other is creating a pollable fd for a specific resource and cgroup.

The trigger creation requires CAP_SYS_RESOURCE, and gives the possibility to pick specific time window and threshold, spawing an RT thread to aggregate the data.

Quoted 5 lines

Systemd would like to provide containers the option to monitor pressure on their own cgroup and sub-cgroups. For example, if systemd launches a container that itself then launches services, the container should have the ability to poll() for pressure in individual services. But neither the container nor the services are privileged.

Quoted 3 lines

This sounds like an interesting usecase. I'll need to take a closer look once I'm back from vacation later this week. Thanks!

Thanks, Suren!

There is also the desktop monitoring usecase that Chris Down had inquired about some while back:

https://lore.kernel.org/all/CAJuCfpGnJBEvQTUeJ_U6+rHmPcMjw_pPL+QFj7Sec5fHZPH67w@mail.gmail.com/T/

The patches should help with that as well.