SM6350 GPU
Subsystems (5)
v2 cover SM6350 GPU
Add all the required nodes for SM6350's A619 and fix up its GPUCC bindings.
This has been ready for like 1.5y now, time to finally merge it as the display part will take some more time (due to the HW catalog rework).
Depends on (bindings, admittedly I could have organized it better):
https://lore.kernel.org/linux-arm-msm/[email protected]/#t
---
Changes in v2:
- gpu_speed_bin@ -> gpu-speed-bin@ [3/5]
- Order GPU nodes properly [4/5]
- sort out the clock-names issue
- throw in the dpu patch, as the driver part has been finally merged
- pick up tags
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Konrad Dybcio (7):
clk: qcom: gpucc-sm6350: Introduce index-based clk lookup
clk: qcom: gpucc-sm6350: Fix clock source names
arm64: dts: qcom: sm6350: Add GPUCC node
arm64: dts: qcom: sm6350: Add QFPROM node
arm64: dts: qcom: sm6350: Add GPU nodes
arm64: dts: qcom: sm6350: Fix ZAP region
arm64: dts: qcom: sm6350: Add DPU1 nodes
arch/arm64/boot/dts/qcom/sm6350.dtsi | 394 ++++++++++++++++++++++++++++++++++- drivers/clk/qcom/gpucc-sm6350.c | 18 +- 2 files changed, 402 insertions(+), 10 deletions(-)
---
base-commit: b16049b21162bb649cdd8519642a35972b7910fe
change-id: 20230315-topic-lagoon_gpu-8c2abccbc6eb
Best regards,
Signature · 1 line
Konrad Dybcio <[email protected]>
PATCH v2 1/7 clk: qcom: gpucc-sm6350: Introduce index-based clk lookup
Add the nowadays-prefered and marginally faster way of looking up parent clocks in the device tree. It also allows for clock-names-independent operation, so long as the order (which is enforced by schema) is kept.
--- drivers/clk/qcom/gpucc-sm6350.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
drivers/clk/qcom/gpucc-sm6350.c +13 -5
@@ -24,6 +24,12 @@#define CX_GMU_CBCR_WAKE_MASK 0xF#define CX_GMU_CBCR_WAKE_SHIFT 8 +enum { +DT_BI_TCXO , +DT_GPLL0_OUT_MAIN , +DT_GPLL0_OUT_MAIN_DIV , +}; +enum {P_BI_TCXO ,P_GPLL0_OUT_MAIN ,
@@ -61,6 +67,7 @@ static struct clk_alpha_pll gpu_cc_pll0 = { .hw.init = &(struct clk_init_data){ .name ="gpu_cc_pll0" , .parent_data = &(const struct clk_parent_data ){ + .index =DT_BI_TCXO , .fw_name ="bi_tcxo" , }, .num_parents =1 ,
@@ -104,6 +111,7 @@ static struct clk_alpha_pll gpu_cc_pll1 = { .hw.init = &(struct clk_init_data){ .name ="gpu_cc_pll1" , .parent_data = &(const struct clk_parent_data ){ + .index =DT_BI_TCXO , .fw_name ="bi_tcxo" , }, .num_parents =1 ,
@@ -121,11 +129,11 @@ static const struct parent_map gpu_cc_parent_map_0[] = { };static const struct clk_parent_data gpu_cc_parent_data_0[] = { - { .fw_name ="bi_tcxo" }, + { .index =DT_BI_TCXO , .fw_name ="bi_tcxo" }, { .hw = &gpu_cc_pll0.clkr.hw }, { .hw = &gpu_cc_pll1.clkr.hw }, - { .fw_name ="gcc_gpu_gpll0_clk" }, - { .fw_name ="gcc_gpu_gpll0_div_clk" }, + { .index =DT_GPLL0_OUT_MAIN , .fw_name ="gcc_gpu_gpll0_clk" }, + { .index =DT_GPLL0_OUT_MAIN_DIV , .fw_name ="gcc_gpu_gpll0_div_clk" }, };static const struct parent_map gpu_cc_parent_map_1[] = {
@@ -138,12 +146,12 @@ static const struct parent_map gpu_cc_parent_map_1[] = { };static const struct clk_parent_data gpu_cc_parent_data_1[] = { - { .fw_name ="bi_tcxo" }, + { .index =DT_BI_TCXO , .fw_name ="bi_tcxo" }, { .hw = &crc_div.hw }, { .hw = &gpu_cc_pll0.clkr.hw }, { .hw = &gpu_cc_pll1.clkr.hw }, { .hw = &gpu_cc_pll1.clkr.hw }, - { .fw_name ="gcc_gpu_gpll0_clk" }, + { .index =DT_GPLL0_OUT_MAIN , .fw_name ="gcc_gpu_gpll0_clk" }, };static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
Signature · 1 line
2.41.0
PATCH v2 2/7 clk: qcom: gpucc-sm6350: Fix clock source names
In reply to Konrad Dybciofw_name for GCC inputs didn't match the bindings. Fix it.
--- drivers/clk/qcom/gpucc-sm6350.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/clk/qcom/gpucc-sm6350.c +3 -3
@@ -132,8 +132,8 @@ static const struct clk_parent_data gpu_cc_parent_data_0[] = { { .index = DT_BI_TCXO, .fw_name = "bi_tcxo" }, { .hw = &gpu_cc_pll0.clkr.hw }, { .hw = &gpu_cc_pll1.clkr.hw }, - { .index = DT_GPLL0_OUT_MAIN, .fw_name = "gcc_gpu_gpll0_clk" }, - { .index = DT_GPLL0_OUT_MAIN_DIV, .fw_name = "gcc_gpu_gpll0_div_clk" }, + { .index = DT_GPLL0_OUT_MAIN, .fw_name = "gcc_gpu_gpll0_clk_src" }, + { .index = DT_GPLL0_OUT_MAIN_DIV, .fw_name = "gcc_gpu_gpll0_div_clk_src" }, }; static const struct parent_map gpu_cc_parent_map_1[] = {
@@ -151,7 +151,7 @@ static const struct clk_parent_data gpu_cc_parent_data_1[] = { { .hw = &gpu_cc_pll0.clkr.hw }, { .hw = &gpu_cc_pll1.clkr.hw }, { .hw = &gpu_cc_pll1.clkr.hw }, - { .index = DT_GPLL0_OUT_MAIN, .fw_name = "gcc_gpu_gpll0_clk" }, + { .index = DT_GPLL0_OUT_MAIN, .fw_name = "gcc_gpu_gpll0_clk_src" }, }; static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
Signature · 1 line
2.41.0
PATCH v2 3/7 arm64: dts: qcom: sm6350: Add GPUCC node
In reply to Konrad DybcioFrom: Konrad Dybcio <[email protected]>
Add and configure a node for the GPU clock controller.
--- arch/arm64/boot/dts/qcom/sm6350.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/qcom/sm6350.dtsi +15 -0
@@ -5,6 +5,7 @@ */ #include <dt-bindings/clock/qcom,gcc-sm6350.h> +#include <dt-bindings/clock/qcom,gpucc-sm6350.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm6350-camcc.h> #include <dt-bindings/dma/qcom-gpi.h>
@@ -1308,6 +1309,20 @@ compute-cb@5 { }; }; + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm6350-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK>, + <&gcc GCC_GPU_GPLL0_DIV_CLK>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mpss: remoteproc@4080000 { compatible = "qcom,sm6350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>;
Signature · 1 line
2.41.0
PATCH v2 4/7 arm64: dts: qcom: sm6350: Add QFPROM node
In reply to Konrad DybcioFrom: Konrad Dybcio <[email protected]>
Add a node for the QFPROM NVMEM hw and define the GPU fuse.
--- arch/arm64/boot/dts/qcom/sm6350.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm64/boot/dts/qcom/sm6350.dtsi +12 -0
@@ -805,6 +805,18 @@ ipcc: mailbox@408000 { #mbox-cells = <2>; }; + qfprom: qfprom@784000 { + compatible = "qcom,sm6350-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu-speed-bin@2015 { + reg = <0x2015 0x1>; + bits = <0 8>; + }; + }; + rng: rng@793000 { compatible = "qcom,prng-ee"; reg = <0 0x00793000 0 0x1000>;
Signature · 1 line
2.41.0
PATCH v2 5/7 arm64: dts: qcom: sm6350: Add GPU nodes
In reply to Konrad DybcioFrom: Konrad Dybcio <[email protected]>
Add Adreno, GPU SMMU and GMU nodes to hook up everything that the A619 needs to function properly.
--- arch/arm64/boot/dts/qcom/sm6350.dtsi | 139 +++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+)
arch/arm64/boot/dts/qcom/sm6350.dtsi +139 -0
@@ -1321,6 +1321,145 @@ compute-cb@5 { }; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-619.0", "qcom,adreno"; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + zap-shader { + memory-region = <&pil_gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-850000000 { + opp-hz = /bits/ 64 <850000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-supported-hw = <0x02>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-supported-hw = <0x04>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0x08>; + }; + + opp-565000000 { + opp-hz = /bits/ 64 <565000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0x10>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0xff>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0xff>; + }; + + opp-253000000 { + opp-hz = /bits/ 64 <253000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0xff>; + }; + }; + }; + + adreno_smmu: iommu@3d40000 { + compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0 0x03d40000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", + "bus", + "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x31000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", + "gmu_pdc", + "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", + "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + + status = "disabled"; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sm6350-gpucc"; reg = <0 0x03d90000 0 0x9000>;
Signature · 1 line
2.41.0
PATCH v2 6/7 arm64: dts: qcom: sm6350: Fix ZAP region
In reply to Konrad DybcioFrom: Konrad Dybcio <[email protected]>
The previous ZAP region definition was wrong. Fix it. Note this is not a device-specific fixup, but a fixup to the generic PIL load address.
--- arch/arm64/boot/dts/qcom/sm6350.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/qcom/sm6350.dtsi +5 -5
@@ -634,11 +634,6 @@ pil_ipa_gsi_mem: memory@8b710000 { no-map; }; - pil_gpu_mem: memory@8b715400 { - reg = <0 0x8b715400 0 0x2000>; - no-map; - }; - pil_modem_mem: memory@8b800000 { reg = <0 0x8b800000 0 0xf800000>; no-map;
@@ -659,6 +654,11 @@ removed_region: memory@c0000000 { no-map; }; + pil_gpu_mem: memory@f0d00000 { + reg = <0 0xf0d00000 0 0x1000>; + no-map; + }; + debug_region: memory@ffb00000 { reg = <0 0xffb00000 0 0xc0000>; no-map;
Signature · 1 line
2.41.0
PATCH v2 7/7 arm64: dts: qcom: sm6350: Add DPU1 nodes
In reply to Konrad DybcioFrom: Konrad Dybcio <[email protected]>
Add nodes required to enable MDSS/DPU1 on SM6350. There seem to be no additional changes required to support the derivative SoCs, such as SM7225.
--- arch/arm64/boot/dts/qcom/sm6350.dtsi | 218 +++++++++++++++++++++++++++++++++++ 1 file changed, 218 insertions(+)
arch/arm64/boot/dts/qcom/sm6350.dtsi +218 -0
@@ -4,6 +4,7 @@ * Copyright (c) 2022, Luca Weiss <[email protected]> */ +#include <dt-bindings/clock/qcom,dispcc-sm6350.h> #include <dt-bindings/clock/qcom,gcc-sm6350.h> #include <dt-bindings/clock/qcom,gpucc-sm6350.h> #include <dt-bindings/clock/qcom,rpmh.h>
@@ -1869,6 +1870,223 @@ camcc: clock-controller@ad00000 { #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm6350-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "core"; + + power-domains = <&dispcc MDSS_GDSC>; + iommus = <&apps_smmu 0x800 0x2>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm6350-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "rot", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM6350_CX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-373333333 { + opp-hz = /bits/ 64 <373333333>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-448000000 { + opp-hz = /bits/ 64 <448000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SM6350_MX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm6350-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm6350-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
Signature · 1 line
2.41.0
Re: (subset) [PATCH v2 0/7] SM6350 GPU
In reply to Konrad DybcioQuoted 10 lines · Konrad Dybcio
Add all the required nodes for SM6350's A619 and fix up its GPUCC bindings.
This has been ready for like 1.5y now, time to finally merge it as the display part will take some more time (due to the HW catalog rework).
Depends on (bindings, admittedly I could have organized it better):
https://lore.kernel.org/linux-arm-msm/[email protected]/#t[...]
Applied, thanks!
[3/7] arm64: dts: qcom: sm6350: Add GPUCC node
commit: 75a511b1e5ff6ffadb9b51d85beee8c7bcc29ba9
[4/7] arm64: dts: qcom: sm6350: Add QFPROM node
commit: 5b1e5d9a21ec2ad0654ce192371ed81b12088c6f
[5/7] arm64: dts: qcom: sm6350: Add GPU nodes
commit: bd9b767502806faccbac6f2c8db09d0ea6ca6e3e
[6/7] arm64: dts: qcom: sm6350: Fix ZAP region
commit: 44bcded2be4fe9b9d0b6e48075c9947b75c0af63
[7/7] arm64: dts: qcom: sm6350: Add DPU1 nodes
commit: 26c71d31f8be3493006140961acf6be204004fdbBest regards,
Signature · 1 line
Bjorn Andersson <[email protected]>