Skip to contentSkip to conversation

soundwire: bus: Remove now outdated comments on no_pm IO

PATCH Superseded Charles Keepax 4 participants 9 messages Mar 16, 2023 – Mar 17, 2023 SoundWire

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 soundwire: bus: Remove now outdated comments on no_pm IO

Things have moved more towards end drivers using the no_pm versions of the IO functions. See commits:

commit 167790abb90f ("soundwire: export sdw_write/read_no_pm functions") commit 62dc9f3f2fd0 ("soundwire: bus: export sdw_nwrite_no_pm and
sdw_nread_no_pm functions")

As such this comment is now misleading, so remove it.

---
 drivers/soundwire/bus.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/soundwire/bus.c +0 -3
index b6aca59c31300..3c67266f94834 100644
@@ -384,9 +384,6 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
 
 /*
  * Read/Write IO functions.
- * no_pm versions can only be called by the bus, e.g. while enumerating or
- * handling suspend-resume sequences.
- * all clients need to use the pm versions
  */
 
 int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
Signature · 1 line
2.30.2
#1 lore raw

PATCH 2/2 soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

Currently issuing a sdw_nread/nwrite_no_pm across a page boundary will silently fail to write correctly as nothing updates the page registers, meaning the same page of the chip will get rewritten with each successive page of data.

As the sdw_msg structure contains page information it seems reasonable that a single sdw_msg should always be within one page. It is also mostly simpler to handle the paging at the bus level rather than each master having to handle it in their xfer_msg callback.

As such add handling to the bus code to split up a transfer into multiple sdw_msg's when they go across page boundaries.

---
 drivers/soundwire/bus.c | 47 +++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 21 deletions(-)
drivers/soundwire/bus.c +26 -21
index 3c67266f94834..bdd251e871694 100644
@@ -386,37 +386,42 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
  * Read/Write IO functions.
  */
 
-int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+static int sdw_ntransfer_no_pm(struct sdw_slave *slave, u32 addr, u8 flags,
+			       size_t count, u8 *val)
 {
 	struct sdw_msg msg;
+	size_t size;
 	int ret;
 
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_READ, val);
-	if (ret < 0)
-		return ret;
+	while (count) {
+		// Only handle bytes up to next page boundary
+		size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));
 
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+		ret = sdw_fill_msg(&msg, slave, addr, size, slave->dev_num, flags, val);
+		if (ret < 0)
+			return ret;
+
+		ret = sdw_transfer(slave->bus, &msg);
+		if (ret < 0 && !slave->is_mockup_device)
+			return ret;
+
+		addr += size;
+		val += size;
+		count -= size;
+	}
+
+	return 0;
+}
+
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_READ, count, val);
 }
 EXPORT_SYMBOL(sdw_nread_no_pm);
 
 int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 {
-	struct sdw_msg msg;
-	int ret;
-
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_WRITE, (u8 *)val);
-	if (ret < 0)
-		return ret;
-
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_WRITE, count, (u8 *)val);
 }
 EXPORT_SYMBOL(sdw_nwrite_no_pm);
 
Signature · 1 line
2.30.2
#2 lore raw

Re: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

Quoted 5 lines · Charles Keepax

Currently issuing a sdw_nread/nwrite_no_pm across a page boundary will silently fail to write correctly as nothing updates the page registers, meaning the same page of the chip will get rewritten with each successive page of data.

Quoted 8 lines

As the sdw_msg structure contains page information it seems reasonable that a single sdw_msg should always be within one page. It is also mostly simpler to handle the paging at the bus level rather than each master having to handle it in their xfer_msg callback.

As such add handling to the bus code to split up a transfer into multiple sdw_msg's when they go across page boundaries.

This sounds good but we need to clarify that the multiple sdw_msg's will not necessarily be sent one after the other, the msg_lock is held in the sdw_transfer() function, so there should be no expectation that e.g. one big chunk of firmware code can be sent without interruption.

I also wonder if we should have a lower bar than the page to avoid hogging the bus with large read/write transactions. If there are multiple devices on the same link and one of them signals an alert status while a large transfer is on-going, the alert handling will mechanically be delayed by up to a page - that's 32k reads/writes, isn't it?

Quoted 73 lines
---
 drivers/soundwire/bus.c | 47 +++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 21 deletions(-)
drivers/soundwire/bus.c +26 -21
index 3c67266f94834..bdd251e871694 100644
@@ -386,37 +386,42 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
  * Read/Write IO functions.
  */
 
-int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+static int sdw_ntransfer_no_pm(struct sdw_slave *slave, u32 addr, u8 flags,
+			       size_t count, u8 *val)
 {
 	struct sdw_msg msg;
+	size_t size;
 	int ret;
 
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_READ, val);
-	if (ret < 0)
-		return ret;
+	while (count) {
+		// Only handle bytes up to next page boundary
+		size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));
 
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+		ret = sdw_fill_msg(&msg, slave, addr, size, slave->dev_num, flags, val);
+		if (ret < 0)
+			return ret;
+
+		ret = sdw_transfer(slave->bus, &msg);
+		if (ret < 0 && !slave->is_mockup_device)
+			return ret;
+
+		addr += size;
+		val += size;
+		count -= size;
+	}
+
+	return 0;
+}
+
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_READ, count, val);
 }
 EXPORT_SYMBOL(sdw_nread_no_pm);
 
 int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 {
-	struct sdw_msg msg;
-	int ret;
-
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_WRITE, (u8 *)val);
-	if (ret < 0)
-		return ret;
-
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_WRITE, count, (u8 *)val);
 }
 EXPORT_SYMBOL(sdw_nwrite_no_pm);
 
#3 lore raw

Re: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

Quoted 14 lines · Pierre-Louis Bossart
Quoted 11 lines · Charles Keepax

Currently issuing a sdw_nread/nwrite_no_pm across a page boundary will silently fail to write correctly as nothing updates the page registers, meaning the same page of the chip will get rewritten with each successive page of data.

As the sdw_msg structure contains page information it seems reasonable that a single sdw_msg should always be within one page. It is also mostly simpler to handle the paging at the bus level rather than each master having to handle it in their xfer_msg callback.

Quoted 8 lines
Quoted 2 lines

As such add handling to the bus code to split up a transfer into multiple sdw_msg's when they go across page boundaries.

This sounds good but we need to clarify that the multiple sdw_msg's will not necessarily be sent one after the other, the msg_lock is held in the sdw_transfer() function, so there should be no expectation that e.g. one big chunk of firmware code can be sent without interruption.

I will update the kdoc for nread/nwrite to specify that transactions that cross a page boundry are not expected to be atomic.

Quoted 6 lines

I also wonder if we should have a lower bar than the page to avoid hogging the bus with large read/write transactions. If there are multiple devices on the same link and one of them signals an alert status while a large transfer is on-going, the alert handling will mechanically be delayed by up to a page - that's 32k reads/writes, isn't it?

I think its 16k, but I would be inclined to say this is a separate fix. The current code will tie up the bus for longer than my fix does, since it only calls sdw_transfer once, and it will write the wrong registers whilst doing it. Also to be clear this wasn't found with super large transfers just medium sized ones that happened to cross a page boundry.

If we want to add some transaction size capping that is really a new feature, this patch a bug fix. I would also be inclined to say if we are going to add transaction size capping, we probably want some property to specify what we are capping to.

Thanks,
Charles

Quoted 73 lines
Quoted 73 lines
---
 drivers/soundwire/bus.c | 47 +++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 21 deletions(-)
drivers/soundwire/bus.c +26 -21
index 3c67266f94834..bdd251e871694 100644
@@ -386,37 +386,42 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
  * Read/Write IO functions.
  */
 
-int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+static int sdw_ntransfer_no_pm(struct sdw_slave *slave, u32 addr, u8 flags,
+			       size_t count, u8 *val)
 {
 	struct sdw_msg msg;
+	size_t size;
 	int ret;
 
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_READ, val);
-	if (ret < 0)
-		return ret;
+	while (count) {
+		// Only handle bytes up to next page boundary
+		size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));
 
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+		ret = sdw_fill_msg(&msg, slave, addr, size, slave->dev_num, flags, val);
+		if (ret < 0)
+			return ret;
+
+		ret = sdw_transfer(slave->bus, &msg);
+		if (ret < 0 && !slave->is_mockup_device)
+			return ret;
+
+		addr += size;
+		val += size;
+		count -= size;
+	}
+
+	return 0;
+}
+
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_READ, count, val);
 }
 EXPORT_SYMBOL(sdw_nread_no_pm);
 
 int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 {
-	struct sdw_msg msg;
-	int ret;
-
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_WRITE, (u8 *)val);
-	if (ret < 0)
-		return ret;
-
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_WRITE, count, (u8 *)val);
 }
 EXPORT_SYMBOL(sdw_nwrite_no_pm);
 
#4 lore raw

Re: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

Quoted 24 lines · Charles Keepax
Quoted 14 lines · Pierre-Louis Bossart
Quoted 11 lines · Charles Keepax

Currently issuing a sdw_nread/nwrite_no_pm across a page boundary will silently fail to write correctly as nothing updates the page registers, meaning the same page of the chip will get rewritten with each successive page of data.

As the sdw_msg structure contains page information it seems reasonable that a single sdw_msg should always be within one page. It is also mostly simpler to handle the paging at the bus level rather than each master having to handle it in their xfer_msg callback.

Quoted 8 lines
Quoted 2 lines

As such add handling to the bus code to split up a transfer into multiple sdw_msg's when they go across page boundaries.

This sounds good but we need to clarify that the multiple sdw_msg's will not necessarily be sent one after the other, the msg_lock is held in the sdw_transfer() function, so there should be no expectation that e.g. one big chunk of firmware code can be sent without interruption.

Quoted 3 lines

I will update the kdoc for nread/nwrite to specify that transactions that cross a page boundry are not expected to be atomic.

Sounds good.

Quoted 14 lines
Quoted 6 lines

I also wonder if we should have a lower bar than the page to avoid hogging the bus with large read/write transactions. If there are multiple devices on the same link and one of them signals an alert status while a large transfer is on-going, the alert handling will mechanically be delayed by up to a page - that's 32k reads/writes, isn't it?

I think its 16k, but I would be inclined to say this is a separate fix. The current code will tie up the bus for longer than my fix does, since it only calls sdw_transfer once, and it will write the wrong registers whilst doing it. Also to be clear this wasn't found with super large transfers just medium sized ones that happened to cross a page boundry.

Quoted 4 lines

If we want to add some transaction size capping that is really a new feature, this patch a bug fix. I would also be inclined to say if we are going to add transaction size capping, we probably want some property to specify what we are capping to.

Yes indeed, this would be a new feature. I think this should be a manager property, depending on which peripherals are integrated and what latencies are expected.

#5 lore raw

Re: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

In reply to Pierre-Louis Bossart
Quoted 14 lines · Pierre-Louis Bossart
Quoted 11 lines · Charles Keepax

Currently issuing a sdw_nread/nwrite_no_pm across a page boundary will silently fail to write correctly as nothing updates the page registers, meaning the same page of the chip will get rewritten with each successive page of data.

As the sdw_msg structure contains page information it seems reasonable that a single sdw_msg should always be within one page. It is also mostly simpler to handle the paging at the bus level rather than each master having to handle it in their xfer_msg callback.

Quoted 8 lines
Quoted 2 lines

As such add handling to the bus code to split up a transfer into multiple sdw_msg's when they go across page boundaries.

This sounds good but we need to clarify that the multiple sdw_msg's will not necessarily be sent one after the other, the msg_lock is held in the sdw_transfer() function, so there should be no expectation that e.g. one big chunk of firmware code can be sent without interruption.

I will update the kdoc for nread/nwrite to specify that transactions that cross a page boundry are not expected to be atomic.

Quoted 6 lines

I also wonder if we should have a lower bar than the page to avoid hogging the bus with large read/write transactions. If there are multiple devices on the same link and one of them signals an alert status while a large transfer is on-going, the alert handling will mechanically be delayed by up to a page - that's 32k reads/writes, isn't it?

I think its 16k, but I would be inclined to say this is a separate fix. The current code will tie up the bus for longer than my fix does, since it only calls sdw_transfer once, and it will write the wrong registers whilst doing it. Also to be clear this wasn't found with super large transfers just medium sized ones that happened to cross a page boundry.

If we want to add some transaction size capping that is really a new feature, this patch a bug fix. I would also be inclined to say if we are going to add transaction size capping, we probably want some property to specify what we are capping to.

Thanks,
Charles

Quoted 73 lines
Quoted 73 lines
---
 drivers/soundwire/bus.c | 47 +++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 21 deletions(-)
drivers/soundwire/bus.c +26 -21
index 3c67266f94834..bdd251e871694 100644
@@ -386,37 +386,42 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
  * Read/Write IO functions.
  */
 
-int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+static int sdw_ntransfer_no_pm(struct sdw_slave *slave, u32 addr, u8 flags,
+			       size_t count, u8 *val)
 {
 	struct sdw_msg msg;
+	size_t size;
 	int ret;
 
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_READ, val);
-	if (ret < 0)
-		return ret;
+	while (count) {
+		// Only handle bytes up to next page boundary
+		size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));
 
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+		ret = sdw_fill_msg(&msg, slave, addr, size, slave->dev_num, flags, val);
+		if (ret < 0)
+			return ret;
+
+		ret = sdw_transfer(slave->bus, &msg);
+		if (ret < 0 && !slave->is_mockup_device)
+			return ret;
+
+		addr += size;
+		val += size;
+		count -= size;
+	}
+
+	return 0;
+}
+
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_READ, count, val);
 }
 EXPORT_SYMBOL(sdw_nread_no_pm);
 
 int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 {
-	struct sdw_msg msg;
-	int ret;
-
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_WRITE, (u8 *)val);
-	if (ret < 0)
-		return ret;
-
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_WRITE, count, (u8 *)val);
 }
 EXPORT_SYMBOL(sdw_nwrite_no_pm);
 
#6 lore raw

Re: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

In reply to Charles Keepax
I love your patch! Perhaps something to improve:

Hi Charles,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on v6.3-rc2 next-20230316]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Charles-Keepax/soundwire-bus-Update-sdw_nread-nwrite_no_pm-to-handle-page-boundaries/20230317-000005
patch link:    https://lore.kernel.org/r/20230316155734.3191577-2-ckeepax%40opensource.cirrus.com
patch subject: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries
config: mips-randconfig-r022-20230312 (https://download.01.org/0day-ci/archive/20230317/[email protected]/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project 67409911353323ca5edf2049ef0df54132fa1ca7)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install mips cross compiling tool for clang build
# apt-get install binutils-mipsel-linux-gnu
# https://github.com/intel-lab-lkp/linux/commit/6944d7175bd15a9a16a411c57f200d3bcecd3c00
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Charles-Keepax/soundwire-bus-Update-sdw_nread-nwrite_no_pm-to-handle-page-boundaries/20230317-000005 git checkout 6944d7175bd15a9a16a411c57f200d3bcecd3c00
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=mips olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=mips SHELL=/bin/bash drivers/soundwire/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
| Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

>> drivers/soundwire/bus.c:398:10: warning: comparison of distinct pointer types ('typeof (count) *' (aka 'unsigned int *') and 'typeof ((((((int)(sizeof(struct (unnamed struct at drivers/soundwire/bus.c:398:10))))) + (((~(((0UL)))) - ((((1UL))) << (0)) + 1) & (~(((0UL))) >> (32 - 1 - (14))))) + 1) - (addr & ((((int)(sizeof(struct (unnamed struct at drivers/soundwire/bus.c:398:10))))) + (((~(((0UL)))) - ((((1UL))) << (0)) + 1) & (~(((0UL))) >> (32 - 1 - (14))))))) *' (aka 'unsigned long *')) [-Wcompare-distinct-pointer-types]
                   size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));
                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/minmax.h:67:19: note: expanded from macro 'min'
   #define min(x, y)       __careful_cmp(x, y, <)
                           ^~~~~~~~~~~~~~~~~~~~~~
   include/linux/minmax.h:36:24: note: expanded from macro '__careful_cmp'
           __builtin_choose_expr(__safe_cmp(x, y), \
                                 ^~~~~~~~~~~~~~~~
   include/linux/minmax.h:26:4: note: expanded from macro '__safe_cmp'
                   (__typecheck(x, y) && __no_side_effects(x, y))
                    ^~~~~~~~~~~~~~~~~
   include/linux/minmax.h:20:28: note: expanded from macro '__typecheck'
           (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                      ~~~~~~~~~~~~~~ ^  ~~~~~~~~~~~~~~

1 warning generated.

vim +398 drivers/soundwire/bus.c

384
385 /*
386 * Read/Write IO functions.
387 */
388
389 static int sdw_ntransfer_no_pm(struct sdw_slave *slave, u32 addr, u8 flags,
390 size_t count, u8 *val)
391 {
392 struct sdw_msg msg;
393 size_t size;
394 int ret;
395
396 while (count) {
397 // Only handle bytes up to next page boundary

 > 398			size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));

399
400 ret = sdw_fill_msg(&msg, slave, addr, size, slave->dev_num, flags, val);
401 if (ret < 0)
402 return ret;
403
404 ret = sdw_transfer(slave->bus, &msg);
405 if (ret < 0 && !slave->is_mockup_device)
406 return ret;
407
408 addr += size;
409 val += size;
410 count -= size;
411 }
412
413 return 0;
414 }
415

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests
#7 lore raw

Re: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

In reply to Charles Keepax
I love your patch! Perhaps something to improve:

Hi Charles,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on v6.3-rc2 next-20230316]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Charles-Keepax/soundwire-bus-Update-sdw_nread-nwrite_no_pm-to-handle-page-boundaries/20230317-000005
patch link:    https://lore.kernel.org/r/20230316155734.3191577-2-ckeepax%40opensource.cirrus.com
patch subject: [PATCH 2/2] soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries
config: i386-randconfig-a011-20230313 (https://download.01.org/0day-ci/archive/20230317/[email protected]/config)
compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/6944d7175bd15a9a16a411c57f200d3bcecd3c00
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Charles-Keepax/soundwire-bus-Update-sdw_nread-nwrite_no_pm-to-handle-page-boundaries/20230317-000005 git checkout 6944d7175bd15a9a16a411c57f200d3bcecd3c00
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash drivers/soundwire/

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
| Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

>> drivers/soundwire/bus.c:398:10: warning: comparison of distinct pointer types ('typeof (count) *' (aka 'unsigned int *') and 'typeof ((((((int)(sizeof(struct (unnamed struct at drivers/soundwire/bus.c:398:10))))) + (((~(((0UL)))) - ((((1UL))) << (0)) + 1) & (~(((0UL))) >> (32 - 1 - (14))))) + 1) - (addr & ((((int)(sizeof(struct (unnamed struct at drivers/soundwire/bus.c:398:10))))) + (((~(((0UL)))) - ((((1UL))) << (0)) + 1) & (~(((0UL))) >> (32 - 1 - (14))))))) *' (aka 'unsigned long *')) [-Wcompare-distinct-pointer-types]
                   size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));
                          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/minmax.h:67:19: note: expanded from macro 'min'
   #define min(x, y)       __careful_cmp(x, y, <)
                           ^~~~~~~~~~~~~~~~~~~~~~
   include/linux/minmax.h:36:24: note: expanded from macro '__careful_cmp'
           __builtin_choose_expr(__safe_cmp(x, y), \
                                 ^~~~~~~~~~~~~~~~
   include/linux/minmax.h:26:4: note: expanded from macro '__safe_cmp'
                   (__typecheck(x, y) && __no_side_effects(x, y))
                    ^~~~~~~~~~~~~~~~~
   include/linux/minmax.h:20:28: note: expanded from macro '__typecheck'
           (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                      ~~~~~~~~~~~~~~ ^  ~~~~~~~~~~~~~~

1 warning generated.

vim +398 drivers/soundwire/bus.c

384
385 /*
386 * Read/Write IO functions.
387 */
388
389 static int sdw_ntransfer_no_pm(struct sdw_slave *slave, u32 addr, u8 flags,
390 size_t count, u8 *val)
391 {
392 struct sdw_msg msg;
393 size_t size;
394 int ret;
395
396 while (count) {
397 // Only handle bytes up to next page boundary

 > 398			size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));

399
400 ret = sdw_fill_msg(&msg, slave, addr, size, slave->dev_num, flags, val);
401 if (ret < 0)
402 return ret;
403
404 ret = sdw_transfer(slave->bus, &msg);
405 if (ret < 0 && !slave->is_mockup_device)
406 return ret;
407
408 addr += size;
409 val += size;
410 count -= size;
411 }
412
413 return 0;
414 }
415

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests
#8 lore raw

PATCH 2/2 soundwire: bus: Update sdw_nread/nwrite_no_pm to handle page boundaries

In reply to Charles Keepax

Currently issuing a sdw_nread/nwrite_no_pm across a page boundary will silently fail to write correctly as nothing updates the page registers, meaning the same page of the chip will get rewritten with each successive page of data.

As the sdw_msg structure contains page information it seems reasonable that a single sdw_msg should always be within one page. It is also mostly simpler to handle the paging at the bus level rather than each master having to handle it in their xfer_msg callback.

As such add handling to the bus code to split up a transfer into multiple sdw_msg's when they go across page boundaries.

---
 drivers/soundwire/bus.c | 47 +++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 21 deletions(-)
drivers/soundwire/bus.c +26 -21
index 3c67266f94834..bdd251e871694 100644
@@ -386,37 +386,42 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
  * Read/Write IO functions.
  */
 
-int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+static int sdw_ntransfer_no_pm(struct sdw_slave *slave, u32 addr, u8 flags,
+			       size_t count, u8 *val)
 {
 	struct sdw_msg msg;
+	size_t size;
 	int ret;
 
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_READ, val);
-	if (ret < 0)
-		return ret;
+	while (count) {
+		// Only handle bytes up to next page boundary
+		size = min(count, (SDW_REGADDR + 1) - (addr & SDW_REGADDR));
 
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+		ret = sdw_fill_msg(&msg, slave, addr, size, slave->dev_num, flags, val);
+		if (ret < 0)
+			return ret;
+
+		ret = sdw_transfer(slave->bus, &msg);
+		if (ret < 0 && !slave->is_mockup_device)
+			return ret;
+
+		addr += size;
+		val += size;
+		count -= size;
+	}
+
+	return 0;
+}
+
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_READ, count, val);
 }
 EXPORT_SYMBOL(sdw_nread_no_pm);
 
 int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 {
-	struct sdw_msg msg;
-	int ret;
-
-	ret = sdw_fill_msg(&msg, slave, addr, count,
-			   slave->dev_num, SDW_MSG_FLAG_WRITE, (u8 *)val);
-	if (ret < 0)
-		return ret;
-
-	ret = sdw_transfer(slave->bus, &msg);
-	if (slave->is_mockup_device)
-		ret = 0;
-	return ret;
+	return sdw_ntransfer_no_pm(slave, addr, SDW_MSG_FLAG_WRITE, count, (u8 *)val);
 }
 EXPORT_SYMBOL(sdw_nwrite_no_pm);
 
Signature · 1 line
2.30.2