Skip to contentSkip to conversation

staging: rtl8192e: remove rf_type from r8192_priv

PATCH In review Michael Straube 2 participants 6 messages Mar 25, 2023 Staging

lore
Share & tools
lore
#0 lore raw

cover staging: rtl8192e: remove rf_type from r8192_priv

This series removes the rf_type field from the r8192_priv structure. RF type is always RF_1T2R, so we do not need to store it in an extra variable.

I don't have any hardware to test this, so compile-tested only.

Michael Straube (4):
staging: rtl8192e: remove RTL819X_DEFAULT_RF_TYPE
staging: rtl8192e: remove redundant setting of rf_type
staging: rtl8192e: priv->rf_type is always RF_1T2R
staging: rtl8192e: remove rf_type from struct r8192_priv

 .../staging/rtl8192e/rtl8192e/r8192E_dev.c    | 19 +++-----------
 .../staging/rtl8192e/rtl8192e/r8192E_phy.c    |  7 ++----
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h  |  3 ---
 drivers/staging/rtl8192e/rtl8192e/rtl_dm.c    | 25 +++++++------------
 4 files changed, 15 insertions(+), 39 deletions(-)
Signature · 1 line
2.40.0
#1 lore raw

PATCH 1/4 staging: rtl8192e: remove RTL819X_DEFAULT_RF_TYPE

Remove RTL819X_DEFAULT_RF_TYPE and use RF_1T2R directly to make follow up patches, which will remove priv->rf_type, easier to review.

---
 drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 2 +-
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h   | 2 --
 2 files changed, 1 insertion(+), 3 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +1 -1
index a67927f0c5e3..3027d43cb362 100644
@@ -343,7 +343,7 @@ static void _rtl92e_read_eeprom_info(struct net_device *dev)
 	else
 		priv->tx_pwr_data_read_from_eeprom = false;
 
-	priv->rf_type = RTL819X_DEFAULT_RF_TYPE;
+	priv->rf_type = RF_1T2R;
 
 	if (priv->card_8192_version > VERSION_8190_BD) {
 		if (!priv->autoload_fail_flag) {
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -2
index 68ec0aeb2dd9..914cd28897a5 100644
@@ -61,8 +61,6 @@
 #define HAL_HW_PCI_REVISION_ID_8192PCIE		0x01
 #define HAL_HW_PCI_REVISION_ID_8192SE	0x10
 
-#define RTL819X_DEFAULT_RF_TYPE		RF_1T2R
-
 #define RTLLIB_WATCH_DOG_TIME		2000
 
 #define MAX_DEV_ADDR_SIZE		8  /*support till 64 bit bus width OS*/
Signature · 1 line
2.40.0
#2 lore raw

PATCH 2/4 staging: rtl8192e: remove redundant setting of rf_type

In reply to Michael Straube

At this point the value of priv->rf_type is RF_1T2R already. Setting it again is redundant and can be removed.

---
 drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 4 ----
 1 file changed, 4 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +0 -4
index 3027d43cb362..0e0096ef4943 100644
@@ -350,10 +350,6 @@ static void _rtl92e_read_eeprom_info(struct net_device *dev)
 			tempval = (rtl92e_eeprom_read(dev,
 						      (EEPROM_RFInd_PowerDiff >> 1))) & 0xff;
 			priv->eeprom_legacy_ht_tx_pwr_diff = tempval & 0xf;
-
-			if (tempval&0x80)
-				priv->rf_type = RF_1T2R;
-
 		} else {
 			priv->eeprom_legacy_ht_tx_pwr_diff = 0x04;
 		}
Signature · 1 line
2.40.0
#3 lore raw

PATCH 3/4 staging: rtl8192e: priv->rf_type is always RF_1T2R

In reply to Michael Straube

The value of priv->rf_type is always RF_1T2R. Remove if statements that check for priv->rf_type == RF_1T2R and remove resulting dead code.

---
 .../staging/rtl8192e/rtl8192e/r8192E_dev.c    | 13 ++++-------
 .../staging/rtl8192e/rtl8192e/r8192E_phy.c    |  7 ++----
 drivers/staging/rtl8192e/rtl8192e/rtl_dm.c    | 23 +++++++------------
 3 files changed, 14 insertions(+), 29 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +4 -9
index 0e0096ef4943..b237970ecf85 100644
@@ -540,8 +540,7 @@ static void _rtl92e_hwconfig(struct net_device *dev)
 		u32 ratr_value;
 
 		ratr_value = regRATR;
-		if (priv->rf_type == RF_1T2R)
-			ratr_value &= ~(RATE_ALL_OFDM_2SS);
+		ratr_value &= ~(RATE_ALL_OFDM_2SS);
 		rtl92e_writel(dev, RATR0, ratr_value);
 		rtl92e_writeb(dev, UFWP, 1);
 	}
@@ -1886,14 +1885,10 @@ void rtl92e_update_ratr_table(struct net_device *dev)
 		break;
 	case IEEE_N_24G:
 	case IEEE_N_5G:
-		if (ieee->ht_info->peer_mimo_ps == 0) {
+		if (ieee->ht_info->peer_mimo_ps == 0)
 			ratr_value &= 0x0007F007;
-		} else {
-			if (priv->rf_type == RF_1T2R)
-				ratr_value &= 0x000FF007;
-			else
-				ratr_value &= 0x0F81F007;
-		}
+		else
+			ratr_value &= 0x000FF007;
 		break;
 	default:
 		break;
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c +2 -5
index b1c297d2ae36..bd302f5cb356 100644
@@ -281,14 +281,11 @@ static void _rtl92e_phy_config_bb(struct net_device *dev, u8 ConfigType)
 	u32 *Rtl819XPHY_REGArray_Table = NULL;
 	u32 *Rtl819XAGCTAB_Array_Table = NULL;
 	u16 AGCTAB_ArrayLen, PHY_REGArrayLen = 0;
-	struct r8192_priv *priv = rtllib_priv(dev);
 
 	AGCTAB_ArrayLen = RTL8192E_AGCTAB_ARR_LEN;
 	Rtl819XAGCTAB_Array_Table = RTL8192E_AGCTAB_ARR;
-	if (priv->rf_type == RF_1T2R) {
-		PHY_REGArrayLen = RTL8192E_PHY_REG_1T2R_ARR_LEN;
-		Rtl819XPHY_REGArray_Table = RTL8192E_PHY_REG_1T2R_ARR;
-	}
+	PHY_REGArrayLen = RTL8192E_PHY_REG_1T2R_ARR_LEN;
+	Rtl819XPHY_REGArray_Table = RTL8192E_PHY_REG_1T2R_ARR;
 
 	if (ConfigType == BB_CONFIG_PHY_REG) {
 		for (i = 0; i < PHY_REGArrayLen; i += 2) {
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c +8 -15
index b745b73eedea..46be638677d9 100644
@@ -272,19 +272,14 @@ void rtl92e_init_adaptive_rate(struct net_device *dev)
 		pra->ping_rssi_enable = 0;
 	pra->ping_rssi_thresh_for_ra = 15;
 
-
-	if (priv->rf_type == RF_1T2R) {
-		pra->upper_rssi_threshold_ratr		=	0x000fc000;
-		pra->middle_rssi_threshold_ratr		=	0x000ff000;
-		pra->low_rssi_threshold_ratr		=	0x000ff001;
-		pra->low_rssi_threshold_ratr_40M	=	0x000ff005;
-		pra->low_rssi_threshold_ratr_20M	=	0x000ff001;
-		pra->ping_rssi_ratr	=	0x0000000d;
-	}
-
+	pra->upper_rssi_threshold_ratr		=	0x000fc000;
+	pra->middle_rssi_threshold_ratr		=	0x000ff000;
+	pra->low_rssi_threshold_ratr		=	0x000ff001;
+	pra->low_rssi_threshold_ratr_40M	=	0x000ff005;
+	pra->low_rssi_threshold_ratr_20M	=	0x000ff001;
+	pra->ping_rssi_ratr	=	0x0000000d;
 }
 
-
 static void _rtl92e_dm_check_rate_adaptive(struct net_device *dev)
 {
 	struct r8192_priv *priv = rtllib_priv(dev);
@@ -383,8 +378,7 @@ static void _rtl92e_dm_check_rate_adaptive(struct net_device *dev)
 			u32 ratr_value;
 
 			ratr_value = targetRATR;
-			if (priv->rf_type == RF_1T2R)
-				ratr_value &= ~(RATE_ALL_OFDM_2SS);
+			ratr_value &= ~(RATE_ALL_OFDM_2SS);
 			rtl92e_writel(dev, RATR0, ratr_value);
 			rtl92e_writeb(dev, UFWP, 1);
 
@@ -981,8 +975,7 @@ void rtl92e_dm_restore_state(struct net_device *dev)
 	      priv->rtllib->mode == WIRELESS_MODE_N_5G))
 		return;
 	ratr_value = reg_ratr;
-	if (priv->rf_type == RF_1T2R)
-		ratr_value &= ~(RATE_ALL_OFDM_2SS);
+	ratr_value &= ~(RATE_ALL_OFDM_2SS);
 	rtl92e_writel(dev, RATR0, ratr_value);
 	rtl92e_writeb(dev, UFWP, 1);
 	if (priv->tx_pwr_tracking_init && priv->btxpower_tracking)
Signature · 1 line
2.40.0
#4 lore raw

PATCH 4/4 staging: rtl8192e: remove rf_type from struct r8192_priv

In reply to Michael Straube

The field rf_type of struct r8192_priv is always RF_1T2R and only used in one place. Use RF_1T2R directly there and remove rf_type from struct r8192_priv.

---
 drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 2 --
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h   | 1 -
 drivers/staging/rtl8192e/rtl8192e/rtl_dm.c     | 2 +-
 3 files changed, 1 insertion(+), 4 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +0 -2
index b237970ecf85..1eb063fe660a 100644
@@ -343,8 +343,6 @@ static void _rtl92e_read_eeprom_info(struct net_device *dev)
 	else
 		priv->tx_pwr_data_read_from_eeprom = false;
 
-	priv->rf_type = RF_1T2R;
-
 	if (priv->card_8192_version > VERSION_8190_BD) {
 		if (!priv->autoload_fail_flag) {
 			tempval = (rtl92e_eeprom_read(dev,
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
index 914cd28897a5..1e99eb833405 100644
@@ -289,7 +289,6 @@ struct r8192_priv {
 	enum nic_t card_8192;
 	u8 card_8192_version;
 
-	u8 rf_type;
 	u8 ic_cut;
 	char nick[IW_ESSID_MAX_SIZE + 1];
 	u8 check_roaming_cnt;
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c +1 -1
index 46be638677d9..d45808760638 100644
@@ -532,7 +532,7 @@ static void _rtl92e_dm_tx_power_tracking_callback_tssi(struct net_device *dev)
 	priv->rtllib->bdynamic_txpower_enable = false;
 
 	powerlevelOFDM24G = priv->pwr_track >> 24;
-	RF_Type = priv->rf_type;
+	RF_Type = RF_1T2R;
 	Value = (RF_Type<<8) | powerlevelOFDM24G;
 
 	for (j = 0; j <= 30; j++) {
Signature · 1 line
2.40.0
Tested-by on the v1 series
#5 lore raw
In reply to Michael Straube
Quoted 12 lines · Michael Straube

This series removes the rf_type field from the r8192_priv structure. RF type is always RF_1T2R, so we do not need to store it in an extra variable.

I don't have any hardware to test this, so compile-tested only.

Michael Straube (4):
staging: rtl8192e: remove RTL819X_DEFAULT_RF_TYPE
staging: rtl8192e: remove redundant setting of rf_type
staging: rtl8192e: priv->rf_type is always RF_1T2R
staging: rtl8192e: remove rf_type from struct r8192_priv

Quoted 6 lines
  .../staging/rtl8192e/rtl8192e/r8192E_dev.c    | 19 +++-----------
  .../staging/rtl8192e/rtl8192e/r8192E_phy.c    |  7 ++----
  drivers/staging/rtl8192e/rtl8192e/rtl_core.h  |  3 ---
  drivers/staging/rtl8192e/rtl8192e/rtl_dm.c    | 25 +++++++------------
  4 files changed, 15 insertions(+), 39 deletions(-)