nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
PATCH 1/1 nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
A system with more than one of these SSDs will only have one usable. The kernel fails to detect more than one nvme device due to duplicate cntlids.
before:
[ 9.395229] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 9.395262] nvme nvme0: pci function 0000:01:00.0 [ 9.395282] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 9.395305] nvme nvme1: pci function 0000:03:00.0 [ 9.409873] nvme nvme0: Duplicate cntlid 1 with nvme1, subsys nqn.2022-07.com.siliconmotion:nvm-subsystem-sn- , rejecting [ 9.409982] nvme nvme0: Removing after probe failure status: -22 [ 9.427487] nvme nvme1: allocated 64 MiB host memory buffer. [ 9.445088] nvme nvme1: 16/0/0 default/read/poll queues [ 9.449898] nvme nvme1: Ignoring bogus Namespace Identifiers
after:
[ 1.161890] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 1.162660] nvme nvme0: pci function 0000:01:00.0 [ 1.162684] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 1.162707] nvme nvme1: pci function 0000:03:00.0 [ 1.191354] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.193378] nvme nvme1: allocated 64 MiB host memory buffer. [ 1.211044] nvme nvme1: 16/0/0 default/read/poll queues [ 1.211080] nvme nvme0: 16/0/0 default/read/poll queues [ 1.216145] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.216261] nvme nvme1: Ignoring bogus Namespace Identifiers
Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue.
Signed-off-by Juraj Pecigos <[email protected]>
--- drivers/nvme/host/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/host/pci.c +2 -1
@@ -3441,7 +3441,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_DEVICE(0x1d97, 0x1d97), /* Lexar NM620 */ .driver_data = NVME_QUIRK_BOGUS_NID, }, { PCI_DEVICE(0x1d97, 0x2269), /* Lexar NM760 */ - .driver_data = NVME_QUIRK_BOGUS_NID, }, + .driver_data = NVME_QUIRK_BOGUS_NID | + NVME_QUIRK_IGNORE_DEV_SUBNQN, }, { PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0061), .driver_data = NVME_QUIRK_DMA_ADDRESS_BITS_48, }, { PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0x0065),
Signature · 1 line
2.40.0
Quoted 27 lines · Juraj Pecigos
A system with more than one of these SSDs will only have one usable. The kernel fails to detect more than one nvme device due to duplicate cntlids.
before:
[ 9.395229] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 9.395262] nvme nvme0: pci function 0000:01:00.0 [ 9.395282] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 9.395305] nvme nvme1: pci function 0000:03:00.0 [ 9.409873] nvme nvme0: Duplicate cntlid 1 with nvme1, subsys nqn.2022-07.com.siliconmotion:nvm-subsystem-sn- , rejecting [ 9.409982] nvme nvme0: Removing after probe failure status: -22 [ 9.427487] nvme nvme1: allocated 64 MiB host memory buffer. [ 9.445088] nvme nvme1: 16/0/0 default/read/poll queues [ 9.449898] nvme nvme1: Ignoring bogus Namespace Identifiersafter:
[ 1.161890] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 1.162660] nvme nvme0: pci function 0000:01:00.0 [ 1.162684] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 1.162707] nvme nvme1: pci function 0000:03:00.0 [ 1.191354] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.193378] nvme nvme1: allocated 64 MiB host memory buffer. [ 1.211044] nvme nvme1: 16/0/0 default/read/poll queues [ 1.211080] nvme nvme0: 16/0/0 default/read/poll queues [ 1.216145] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.216261] nvme nvme1: Ignoring bogus Namespace Identifiers
Quoted 5 lines
Adding the
NVME_QUIRK_IGNORE_DEV_SUBNQNquirk to resolves the issue.Signed-off-by Juraj Pecigos <[email protected]>---
Just looking at the log in the commit message seems like this is solving your problem, looks good.
Reviewed-by Chaitanya Kulkarni <[email protected]>
-ck