arm: dts: k3-j721e-sk-u-boot: Resync dts file and binding with Linux Kernel
PATCH 1/1 arm: dts: k3-j721e-sk-u-boot: Resync dts file and binding with Linux Kernel
From: Sinthu Raja <[email protected]>
This resyncs the dts file of j721e-sk with the currently in-tree K3 platforms. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi file needed to be updated to match.
Also, disable the HBMC which is not supported in the j721e-sk board.
--- arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
arch/arm/dts/k3-j721e-sk-u-boot.dtsi +6 -2
@@ -33,7 +33,7 @@ &cbass_main{ bootph-pre-ram; - main_navss { + main_navss: bus@30000000 { bootph-pre-ram; }; };
@@ -49,7 +49,7 @@ bootph-pre-ram; }; - mcu-navss { + mcu_navss: bus@28380000 { bootph-pre-ram; ringacc@2b800000 {
@@ -237,6 +237,10 @@ bootph-pre-ram; }; +&hbmc { + status = "disabled"; +}; + &ospi0 { bootph-pre-ram;
Signature · 1 line
2.36.1
Hi,
Quoted 39 lines · Sinthu Raja
From: Sinthu Raja <[email protected]>
This resyncs the dts file of j721e-sk with the currently in-tree K3 platforms. Of note are that the main-navss/mcu-navss nodes were renamed to
main_navss/mcu_navssand so theu-boot.dtsifile needed to be updated to match.Also, disable the HBMC which is not supported in the j721e-sk board.
Fixes 58d61fb5a7 ("arm: dts: k3-j721e-sk: Add initial A72 specific dts support")Signed-off-by Sinthu Raja <[email protected]>--- arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)arch/arm/dts/k3-j721e-sk-u-boot.dtsi +2
-2@@ -33,7 +33,7 @@ &cbass_main{ bootph-pre-ram; - main_navss { + main_navss: bus@30000000 { bootph-pre-ram; }; };@@ -49,7 +49,7 @@ bootph-pre-ram; }; - mcu-navss { + mcu_navss: bus@28380000 { bootph-pre-ram; ringacc@2b800000 {
arch/arm/dts/k3-j721e-sk-u-boot.dtsi line 243
Quoted 7 lines
arch/arm/dts/k3-j721e-sk-u-boot.dtsi +4
-0@@ -237,6 +237,10 @@ bootph-pre-ram; }; +&hbmc { + status = "disabled"; +}; +
Please review and let me know your comments.
Quoted 6 lines
arch/arm/dts/k3-j721e-sk-u-boot.dtsi +0
-1&ospi0 { bootph-pre-ram; --2.36.1
Signature · 2 lines
With Regards Sinthu Raja
+Kumar, Udit <[email protected]>
Quoted 66 lines · Sinthu Raja M
Hi,
Quoted 11 lines · Sinthu Raja
From: Sinthu Raja <[email protected]>
This resyncs the dts file of j721e-sk with the currently in-tree K3 platforms. Of note are that the main-navss/mcu-navss nodes were renamed to
main_navss/mcu_navssand so theu-boot.dtsifile needed to be updated to match.Also, disable the HBMC which is not supported in the j721e-sk board.
Fixes 58d61fb5a7 ("arm: dts: k3-j721e-sk: Add initial A72 specific dtssupport")
Review
Quoted 6 lines
Signed-off-by Sinthu Raja <[email protected]>--- arch/arm/dts/k3-j721e-sk-u-boot.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/arch/arm/dts/k3-j721e-sk-u-boot.dtsiQuoted 22 lines
index
0949caa129..31f979f3bb100644arch/arm/dts/k3-j721e-sk-u-boot.dtsi +2
-2@@ -33,7 +33,7 @@ &cbass_main{ bootph-pre-ram; - main_navss { + main_navss: bus@30000000 { bootph-pre-ram; }; };@@ -49,7 +49,7 @@ bootph-pre-ram; }; - mcu-navss { + mcu_navss: bus@28380000 { bootph-pre-ram; ringacc@2b800000 {arch/arm/dts/k3-j721e-sk-u-boot.dtsi line 243
Quoted 7 lines
arch/arm/dts/k3-j721e-sk-u-boot.dtsi +4
-0@@ -237,6 +237,10 @@ bootph-pre-ram; }; +&hbmc { + status = "disabled"; +}; +Please review and let me know your comments.
Quoted 6 lines
arch/arm/dts/k3-j721e-sk-u-boot.dtsi +0
-1&ospi0 { bootph-pre-ram; --2.36.1
--
With Regards
Sinthu Raja
Signature · 2 lines
With Regards Sinthu Raja