i2c: imx-lpi2c: clean rx/tx buffers upon new message
Subsystems (6)
Sasha Levin
maintainerPATCH 1/3 i2c: imx-lpi2c: clean rx/tx buffers upon new message
From: Alexander Stein <[email protected]>
[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ]
When start sending a new message clear the Rx & Tx buffer pointers in order to avoid using stale pointers.
--- drivers/i2c/busses/i2c-imx-lpi2c.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/i2c/busses/i2c-imx-lpi2c.c +2 -0
@@ -475,6 +475,8 @@ static int lpi2c_imx_xfer(struct i2c_adapter *adapter,if (num ==1 && msgs[0 ].len ==0 ) goto stop; + lpi2c_imx->rx_buf =NULL ; + lpi2c_imx->tx_buf =NULL ; lpi2c_imx->delivered =0 ; lpi2c_imx->msglen = msgs[i].len;init_completion (&lpi2c_imx->complete);
Signature · 7 lines
2.39.2 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Sasha Levin
maintainerPATCH 2/3 efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
From: Hans de Goede <[email protected]>
[ Upstream commit 5ed213dd64681f84a01ceaa82fb336cf7d59ddcf ]
Another Lenovo convertable which reports a landscape resolution of 1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.
--- arch/x86/kernel/sysfb_efi.c | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/x86/kernel/sysfb_efi.c +8 -0
@@ -273,6 +273,14 @@ static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = { "IdeaPad Duet 3 10IGL5"), }, }, + { + /* Lenovo Yoga Book X91F / X91L */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), + /* Non exact match to match F + L versions */ + DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"), + }, + }, {}, };
Signature · 1 line
2.39.2
Sasha Levin
maintainerPATCH 3/3 verify_pefile: relax wrapper length check
In reply to Sasha LevinFrom: Robbie Harwood <[email protected]>
[ Upstream commit 4fc5c74dde69a7eda172514aaeb5a7df3600adb3 ]
The PE Format Specification (section "The Attribute Certificate Table (Image Only)") states that dwLength is to be rounded up to 8-byte alignment when used for traversal. Therefore, the field is not required to be an 8-byte multiple in the first place.
Accordingly, pesign has not performed this alignment since version 0.110. This causes kexec failure on pesign'd binaries with "PEFILE:
Signature wrapper len wrong". Update the comment and relax the check.
--- crypto/asymmetric_keys/verify_pefile.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
crypto/asymmetric_keys/verify_pefile.c +8 -4
@@ -139,11 +139,15 @@ static int pefile_strip_sig_wrapper(const void *pebuf,pr_debug ("sig wrapper = { %x, %x, %x }\n" , wrapper.length, wrapper.revision, wrapper.cert_type); -/* Both pesign and sbsign round up the length of certificate table -* (in optional header data directories) to 8 byte alignment. +/* sbsign rounds up the length of certificate table (in optional +* header data directories) to 8 byte alignment. However, the PE +* specification states that while entries are 8-byte aligned, this is +* not included in their length, and as a result, pesign has not +* rounded up since 0.110. */ -if (round_up (wrapper.length,8 ) != ctx->sig_len) { -pr_debug ("Signature wrapper len wrong\n" ); +if (wrapper.length > ctx->sig_len) { +pr_debug ("Signature wrapper bigger than sig len (%x > %x)\n" , + ctx->sig_len, wrapper.length);return -ELIBBAD ; }if (wrapper.revision !=WIN_CERT_REVISION_2_0 ) {
Signature · 7 lines
2.39.2 _______________________________________________ kexec mailing list [email protected] http://lists.infradead.org/mailman/listinfo/kexec