arm64: dts: imx8mn: Add display pipeline components
Subsystems (2)
PATCH 1/1 arm64: dts: imx8mn: Add display pipeline components
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Nano. This makes the DSI display pipeline available on this SoC.
Signed-off-by Marek Vasut <[email protected]>
---
Cc: Abel Vesa <[email protected]>
Cc: Dong Aisheng <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Guido Günther <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: [email protected]
Cc: [email protected]
--- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 57 +++++++++++++++++++++++ 1 file changed, 57 insertions(+)
arch/arm64/boot/dts/freescale/imx8mn.dtsi +57 -0
@@ -1062,6 +1062,63 @@ aips4: bus@32c00000 { #size-cells = <1>; ranges; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>, + <&clk IMX8MN_SYS_PLL2_1000M>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, + <&clk IMX8MN_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>;
Signature · 1 line
2.39.2