Skip to contentSkip to conversation

Align CCS driver behaviour regarding flipping and rotation

PATCH New Sakari Ailus 1 participant 3 messages Apr 4, 2023

Subsystems (2)
lore
Share & tools
lore

Sakari Ailus

author maintainer
#0 lore raw

v2 cover Align CCS driver behaviour regarding flipping and rotation

Hi,

This set aligns the behaviour of flipping controls with other drivers and adds CAMERA_SENSOR_ROTATION and CAMERA_SENSOR_ORIENTATION controls to the CCS driver.

The changes to flipping are that the flipping controls are no longer inverted if the sensor is mounted upside down. The flipping control still default enabled if the sensor is so mounted.

since v1:

- Default is always no flip. Rotation isn't enabled in current DTS, and this is a better option going forward.

Sakari Ailus (2):
media: ccs: Align flipping behaviour with other drivers
media: ccs: Add V4L2 controls from properties

 drivers/media/i2c/ccs/ccs-core.c | 52 +++++++-------------------------
 drivers/media/i2c/ccs/ccs.h      | 14 ---------
 2 files changed, 11 insertions(+), 55 deletions(-)
Signature · 1 line
2.30.2
author maintainer
#1 lore raw

PATCH v2 1/2 media: ccs: Align flipping behaviour with other drivers

No longer mirror flipping controls if the sensor is mounted upside down.

This way the behaviour of the flipping controls and rotation of the sensor are aligned with the rest of the drivers.

---
 drivers/media/i2c/ccs/ccs-core.c | 39 --------------------------------
 drivers/media/i2c/ccs/ccs.h      | 14 ------------
 2 files changed, 53 deletions(-)
drivers/media/i2c/ccs/ccs-core.c +0 -39
index 4a14d7e5d9f2..d44d3a44166f 100644
@@ -569,8 +569,6 @@ static u32 ccs_pixel_order(struct ccs_sensor *sensor)
 			flip |= CCS_IMAGE_ORIENTATION_VERTICAL_FLIP;
 	}
 
-	flip ^= sensor->hvflip_inv_mask;
-
 	dev_dbg(&client->dev, "flip %u\n", flip);
 	return sensor->default_pixel_order ^ flip;
 }
@@ -632,8 +630,6 @@ static int ccs_set_ctrl(struct v4l2_ctrl *ctrl)
 		if (sensor->vflip->val)
 			orient |= CCS_IMAGE_ORIENTATION_VERTICAL_FLIP;
 
-		orient ^= sensor->hvflip_inv_mask;
-
 		ccs_update_mbus_formats(sensor);
 
 		break;
@@ -3224,22 +3220,6 @@ static int ccs_get_hwconfig(struct ccs_sensor *sensor, struct device *dev)
 		goto out_err;
 	}
 
-	rval = fwnode_property_read_u32(fwnode, "rotation", &rotation);
-	if (!rval) {
-		switch (rotation) {
-		case 180:
-			hwcfg->module_board_orient =
-				CCS_MODULE_BOARD_ORIENT_180;
-			fallthrough;
-		case 0:
-			break;
-		default:
-			dev_err(dev, "invalid rotation %u\n", rotation);
-			rval = -EINVAL;
-			goto out_err;
-		}
-	}
-
 	rval = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
 					&hwcfg->ext_clk);
 	if (rval)
@@ -3437,25 +3417,6 @@ static int ccs_probe(struct i2c_client *client)
 	if (rval < 0)
 		goto out_free_ccs_limits;
 
-	/*
-	 * Handle Sensor Module orientation on the board.
-	 *
-	 * The application of H-FLIP and V-FLIP on the sensor is modified by
-	 * the sensor orientation on the board.
-	 *
-	 * For CCS_BOARD_SENSOR_ORIENT_180 the default behaviour is to set
-	 * both H-FLIP and V-FLIP for normal operation which also implies
-	 * that a set/unset operation for user space HFLIP and VFLIP v4l2
-	 * controls will need to be internally inverted.
-	 *
-	 * Rotation also changes the bayer pattern.
-	 */
-	if (sensor->hwcfg.module_board_orient ==
-	    CCS_MODULE_BOARD_ORIENT_180)
-		sensor->hvflip_inv_mask =
-			CCS_IMAGE_ORIENTATION_HORIZONTAL_MIRROR |
-			CCS_IMAGE_ORIENTATION_VERTICAL_FLIP;
-
 	rval = ccs_call_quirk(sensor, limits);
 	if (rval) {
 		dev_err(&client->dev, "limits quirks failed\n");
drivers/media/i2c/ccs/ccs.h +0 -14
index 6beac375cc48..a94c796cea48 100644
@@ -57,17 +57,6 @@
 #define CCS_LIM_AT(sensor, limit, offset)	\
 	ccs_get_limit(sensor, CCS_L_##limit, CCS_L_##limit##_OFFSET(offset))
 
-/*
- * Sometimes due to board layout considerations the camera module can be
- * mounted rotated. The typical rotation used is 180 degrees which can be
- * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
- * FIXME: rotation also changes the bayer pattern.
- */
-enum ccs_module_board_orient {
-	CCS_MODULE_BOARD_ORIENT_0 = 0,
-	CCS_MODULE_BOARD_ORIENT_180,
-};
-
 struct ccs_flash_strobe_parms {
 	u8 mode;
 	u32 strobe_width_high_us;
@@ -90,8 +79,6 @@ struct ccs_hwconfig {
 	u32 csi_signalling_mode;	/* CCS_CSI_SIGNALLING_MODE_* */
 	u64 *op_sys_clock;
 
-	enum ccs_module_board_orient module_board_orient;
-
 	struct ccs_flash_strobe_parms *strobe_setup;
 };
 
@@ -243,7 +230,6 @@ struct ccs_sensor {
 	u8 scale_m;
 	u8 scaling_mode;
 
-	u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
 	u8 frame_skip;
 	u16 embedded_start; /* embedded data start line */
 	u16 embedded_end;
Signature · 1 line
2.30.2
author maintainer
#2 lore raw

PATCH v2 2/2 media: ccs: Add V4L2 controls from properties

In reply to Sakari Ailus

Add V4L2 controls (currently CAMERA_SENSOR_ROTATION and CAMERA_SENSOR_ORIENTATION) from properties.

---
 drivers/media/i2c/ccs/ccs-core.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/media/i2c/ccs/ccs-core.c +11 -2
index d44d3a44166f..daee36c1f545 100644
@@ -796,14 +796,24 @@ static const struct v4l2_ctrl_ops ccs_ctrl_ops = {
 static int ccs_init_controls(struct ccs_sensor *sensor)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	struct v4l2_fwnode_device_properties props;
 	int rval;
 
-	rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 17);
+	rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 19);
 	if (rval)
 		return rval;
 
 	sensor->pixel_array->ctrl_handler.lock = &sensor->mutex;
 
+	rval = v4l2_fwnode_device_parse(&client->dev, &props);
+	if (rval)
+		return rval;
+
+	rval = v4l2_ctrl_new_fwnode_properties(&sensor->pixel_array->ctrl_handler,
+					       &ccs_ctrl_ops, &props);
+	if (rval)
+		return rval;
+
 	switch (CCS_LIM(sensor, ANALOG_GAIN_CAPABILITY)) {
 	case CCS_ANALOG_GAIN_CAPABILITY_GLOBAL: {
 		struct {
@@ -3181,7 +3191,6 @@ static int ccs_get_hwconfig(struct ccs_sensor *sensor, struct device *dev)
 	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_UNKNOWN };
 	struct fwnode_handle *ep;
 	struct fwnode_handle *fwnode = dev_fwnode(dev);
-	u32 rotation;
 	unsigned int i;
 	int rval;
 
Signature · 1 line
2.30.2