arm64: dts: imx8mm: Add display pipeline components
Subsystems (2)
PATCH v2 1/3 arm64: dts: imx8mm: Add display pipeline components
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Mini. This makes the DSI display pipeline available on this SoC.
---
Cc: Abel Vesa <[email protected]>
Cc: Alexander Stein <[email protected]>
Cc: Dong Aisheng <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Guido Günther <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
V2: - Drop the address-cells/size-cells from DSIM node
- Add RB from Fabio, Alexander
- CC Alexander, Jagan
- Bundle the MX8MM,N,P patches together in one series
--- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 55 +++++++++++++++++++++++ 1 file changed, 55 insertions(+)
arch/arm64/boot/dts/freescale/imx8mm.dtsi +55 -0
@@ -1119,6 +1119,61 @@ aips4: bus@32c00000 { #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_AXI>, + <&clk IMX8MM_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, + <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + compatible = "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + csi: csi@32e20000 { compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; reg = <0x32e20000 0x1000>;
Signature · 1 line
2.39.2
PATCH v2 2/3 arm64: dts: imx8mn: Add display pipeline components
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Nano. This makes the DSI display pipeline available on this SoC.
---
Cc: Abel Vesa <[email protected]>
Cc: Alexander Stein <[email protected]>
Cc: Dong Aisheng <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Guido Günther <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
V2: - Drop the address-cells/size-cells from DSIM node
- CC Alexander, Jagan
- Bundle the MX8MM,N,P patches together in one series
--- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 55 +++++++++++++++++++++++ 1 file changed, 55 insertions(+)
arch/arm64/boot/dts/freescale/imx8mn.dtsi +55 -0
@@ -1062,6 +1062,61 @@ aips4: bus@32c00000 { #size-cells = <1>; ranges; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>, + <&clk IMX8MN_SYS_PLL2_1000M>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, + <&clk IMX8MN_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>;
Signature · 1 line
2.39.2
PATCH v2 3/3 arm64: dts: imx8mp: Add display pipeline components
In reply to Marek VasutAdd LCDIF scanout engine and DSIM bridge nodes for i.MX8M Plus. This makes the DSI display pipeline available on this SoC.
---
Cc: Abel Vesa <[email protected]>
Cc: Alexander Stein <[email protected]>
Cc: Dong Aisheng <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Guido Günther <[email protected]>
Cc: Jagan Teki <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
V2: - Drop the address-cells/size-cells from DSIM node
- Add RB from Fabio
- CC Alexander, Jagan
- Bundle the MX8MM,N,P patches together in one series
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 55 +++++++++++++++++++++++ 1 file changed, 55 insertions(+)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +55 -0
@@ -1126,6 +1126,61 @@ aips4: bus@32c00000 { #size-cells = <1>; ranges; + mipi_dsi: dsi@32e60000 { + compatible = "fsl,imx8mp-mipi-dsim"; + reg = <0x32e60000 0x400>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <200000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif1: endpoint { + remote-endpoint = <&lcdif1_to_dsim>; + }; + }; + }; + }; + + lcdif1: display-controller@32e80000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32e80000 0x10000>; + clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI>, + <&clk IMX8MP_CLK_MEDIA_APB>; + assigned-clock-parents = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, + <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>; + status = "disabled"; + + port { + lcdif1_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif1>; + }; + }; + }; + lcdif2: display-controller@32e90000 { compatible = "fsl,imx8mp-lcdif"; reg = <0x32e90000 0x10000>;
Signature · 1 line
2.39.2
Shawn Guo
AppliedQuoted 6 lines · Marek Vasut
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Mini. This makes the DSI display pipeline available on this SoC.
Reviewed-by Alexander Stein <[email protected]>Reviewed-by Fabio Estevam <[email protected]>Signed-off-by Marek Vasut <[email protected]>
Applied all, thanks!