Skip to contentSkip to conversation

sunxi: arm64: boot0.h: runtime check for RVBAR address

RFC PATCH In review Andre Przywara 2 participants 2 messages Apr 5, 2023 – Apr 8, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 sunxi: arm64: boot0.h: runtime check for RVBAR address

Some SoCs of the H616 family use a die variant, that puts some CPU power and reset control registers at a different address. There are examples of two instances of the same board, using different die revisions of the otherwise same H313 SoC. We need to write to a register in that block *very* early in the SPL boot, to switch the core to AArch64.

Since the devices are otherwise indistinguishable, let the SPL code read that die variant and use the respective RVBAR address based on that. That is a bit tricky, since we need to do that in hand-coded AArch32 machine language, shared by all 64-bit SoCs. To avoid build dependencies in this mess, we always provide two addresses to choose from, and just give identical values for all other SoCs. This allows the same code to run on all 64-bit SoCs, and controls this switch behaviour purely from Kconfig.

---
Hi,

this patch goes on top of the two patches I sent earlier, that introduce CONFIG_SUNXI_RVBAR_ADDRESS. I don't have a device with that die variant, so just roughly tested this by inverting the ldrne and swapping the addresses.
Please let me know if you have such a device and can confirm that this code works on the original and alternative die alike.

Cheers,
Andre

 arch/arm/include/asm/arch-sunxi/boot0.h | 14 ++++++++++----
 arch/arm/mach-sunxi/Kconfig             | 17 ++++++++++++++++-
 2 files changed, 26 insertions(+), 5 deletions(-)
arch/arm/include/asm/arch-sunxi/boot0.h +10 -4
index 1a396f78488..b27df3b9b5e 100644
@@ -20,8 +20,8 @@
 	b       reset
 	.space  0x7c
 
-	.word	0xe28f0058	// add     r0, pc, #88
-	.word	0xe59f1054	// ldr     r1, [pc, #84]
+	.word	0xe28f0070	// add     r0, pc, #112	 // @(fel_stash - .)
+	.word	0xe59f106c	// ldr     r1, [pc, #108] // fel_stash - .
 	.word	0xe0800001	// add     r0, r0, r1
 	.word	0xe580d000	// str     sp, [r0]
 	.word	0xe580e004	// str     lr, [r0, #4]
@@ -32,8 +32,12 @@
 	.word	0xee1cef10	// mrc     15, 0, lr, cr12, cr0, {0}
 	.word	0xe580e010	// str     lr, [r0, #16]
 
-	.word	0xe59f1024	// ldr     r1, [pc, #36] ; 0x170000a0
-	.word	0xe59f0024	// ldr     r0, [pc, #36] ; CONFIG_*_TEXT_BASE
+	.word	0xe59f1034	// ldr     r1, [pc, #52] ; RVBAR_ADDRESS
+	.word	0xe59f0034	// ldr     r0, [pc, #52] ; SUNXI_SRAMC_BASE
+	.word	0xe5900024	// ldr     r0, [r0, #36] ; SRAM_VER_REG
+	.word	0xe21000ff	// ands    r0, r0, #255    ; 0xff
+	.word	0x159f102c	// ldrne   r1, [pc, #44] ; RVBAR_ALTERNATIVE
+	.word	0xe59f002c	// ldr     r0, [pc, #44] ; CONFIG_*TEXT_BASE
 	.word	0xe5810000	// str     r0, [r1]
 	.word	0xf57ff04f	// dsb     sy
 	.word	0xf57ff06f	// isb     sy
@@ -45,6 +49,8 @@
 	.word	0xeafffffd	// b       @wfi
 
 	.word	CONFIG_SUNXI_RVBAR_ADDRESS	// writable RVBAR mapping addr
+	.word	SUNXI_SRAMC_BASE
+	.word	CONFIG_SUNXI_RVBAR_ALTERNATIVE	// address for die variant
 #ifdef CONFIG_SPL_BUILD
 	.word	CONFIG_SPL_TEXT_BASE
 #else
arch/arm/mach-sunxi/Kconfig +16 -1
index 0527b3863a7..be0910499bb 100644
@@ -111,7 +111,7 @@ config SUNXI_SRAM_ADDRESS
 	SRAM to a different address.
 
 config SUNXI_RVBAR_ADDRESS
-	hex "RVBAR address"
+	hex
 	depends on ARM64
 	default 0x09010040 if SUN50I_GEN_H6
 	default 0x017000a0
@@ -122,6 +122,21 @@ config SUNXI_RVBAR_ADDRESS
 	entry point when switching to AArch64. This store is on different
 	addresses, depending on the SoC.
 
+config SUNXI_RVBAR_ALTERNATIVE
+	hex
+	depends on ARM64
+	default 0x81000040 if MACH_SUN50I_H616
+	default 0x09010040 if SUN50I_GEN_H6
+	default 0x017000a0
+	---help---
+	The H616 die exists is at least two variants, with one having the
+	RVBAR registers at a different address. If the SoC variant ID
+	(stored in SRAM_VER_REG[7:0]) is not 0, we need to use the
+	other address.
+	Set this alternative address to the same as the normal address
+	for all other SoCs, so the content of the SRAM_VER_REG becomes
+	irrelevant there, and we can use the same code.
+
 config SUNXI_A64_TIMER_ERRATUM
 	bool
 
Signature · 1 line
2.35.7
maintainer Reviewed-by on v1 1/1
#1 lore raw

Dne sreda, 05. april 2023 ob 22:30:11 CEST je Andre Przywara napisal(a):

Quoted 39 lines

Some SoCs of the H616 family use a die variant, that puts some CPU power and reset control registers at a different address. There are examples of two instances of the same board, using different die revisions of the otherwise same H313 SoC. We need to write to a register in that block *very* early in the SPL boot, to switch the core to AArch64.

Since the devices are otherwise indistinguishable, let the SPL code read that die variant and use the respective RVBAR address based on that. That is a bit tricky, since we need to do that in hand-coded AArch32 machine language, shared by all 64-bit SoCs. To avoid build dependencies in this mess, we always provide two addresses to choose from, and just give identical values for all other SoCs. This allows the same code to run on all 64-bit SoCs, and controls this switch behaviour purely from Kconfig.

---
Hi,

this patch goes on top of the two patches I sent earlier, that introduce CONFIG_SUNXI_RVBAR_ADDRESS. I don't have a device with that die variant, so just roughly tested this by inverting the ldrne and swapping the addresses.
Please let me know if you have such a device and can confirm that this code works on the original and alternative die alike.

Cheers,
Andre

 arch/arm/include/asm/arch-sunxi/boot0.h | 14 ++++++++++----
 arch/arm/mach-sunxi/Kconfig             | 17 ++++++++++++++++-
 2 files changed, 26 insertions(+), 5 deletions(-)
(quoted diff) +0 -0

b/arch/arm/include/asm/arch-sunxi/boot0.h index 1a396f78488..b27df3b9b5e 100644

arch/arm/include/asm/arch-sunxi/boot0.h line 23

Quoted 6 lines
arch/arm/include/asm/arch-sunxi/boot0.h +1 -2
@@ -20,8 +20,8 @@
 	b       reset
 	.space  0x7c
 
-	.word	0xe28f0058	// add     r0, pc, #88
-	.word	0xe59f1054	// ldr     r1, [pc, #84]
+	.word	0xe28f0070	// add     r0, pc, #112	 // @(fel_stash - 

.)

arch/arm/include/asm/arch-sunxi/boot0.h line 36

Quoted 10 lines
arch/arm/include/asm/arch-sunxi/boot0.h +1 -2
+	.word	0xe59f106c	// ldr     r1, [pc, #108] // fel_stash - .
 	.word	0xe0800001	// add     r0, r0, r1
 	.word	0xe580d000	// str     sp, [r0]
 	.word	0xe580e004	// str     lr, [r0, #4]
@@ -32,8 +32,12 @@
 	.word	0xee1cef10	// mrc     15, 0, lr, cr12, cr0, {0}
 	.word	0xe580e010	// str     lr, [r0, #16]
 
-	.word	0xe59f1024	// ldr     r1, [pc, #36] ; 0x170000a0
-	.word	0xe59f0024	// ldr     r0, [pc, #36] ; 

CONFIG_*_TEXT_BASE

arch/arm/include/asm/arch-sunxi/boot0.h line 51

Quoted 13 lines
arch/arm/include/asm/arch-sunxi/boot0.h +6 -0
+	.word	0xe59f1034	// ldr     r1, [pc, #52] ; RVBAR_ADDRESS
+	.word	0xe59f0034	// ldr     r0, [pc, #52] ; SUNXI_SRAMC_BASE
+	.word	0xe5900024	// ldr     r0, [r0, #36] ; SRAM_VER_REG
+	.word	0xe21000ff	// ands    r0, r0, #255    ; 0xff
+	.word	0x159f102c	// ldrne   r1, [pc, #44] ; RVBAR_ALTERNATIVE
+	.word	0xe59f002c	// ldr     r0, [pc, #44] ; CONFIG_*TEXT_BASE
 	.word	0xe5810000	// str     r0, [r1]
 	.word	0xf57ff04f	// dsb     sy
 	.word	0xf57ff06f	// isb     sy
@@ -45,6 +49,8 @@
 	.word	0xeafffffd	// b       @wfi
 
 	.word	CONFIG_SUNXI_RVBAR_ADDRESS	// writable RVBAR 

mapping addr

arch/arm/include/asm/arch-sunxi/boot0.h line 53

Quoted 2 lines
arch/arm/include/asm/arch-sunxi/boot0.h +2 -0
+	.word	SUNXI_SRAMC_BASE
+	.word	CONFIG_SUNXI_RVBAR_ALTERNATIVE	// address for die 

variant

Quoted 17 lines
arch/arm/include/asm/arch-sunxi/boot0.h +0 -0
 #ifdef CONFIG_SPL_BUILD
 	.word	CONFIG_SPL_TEXT_BASE
 #else
arch/arm/mach-sunxi/Kconfig +1 -1
index 0527b3863a7..be0910499bb 100644
@@ -111,7 +111,7 @@ config SUNXI_SRAM_ADDRESS
 	SRAM to a different address.
 
 config SUNXI_RVBAR_ADDRESS
-	hex "RVBAR address"
+	hex
 	depends on ARM64
 	default 0x09010040 if SUN50I_GEN_H6
 	default 0x017000a0

arch/arm/mach-sunxi/Kconfig config SUNXI_RVBAR_ADDRESS · line 128

Quoted 7 lines
arch/arm/mach-sunxi/Kconfig +4 -0
@@ -122,6 +122,21 @@ config SUNXI_RVBAR_ADDRESS
 	entry point when switching to AArch64. This store is on different
 	addresses, depending on the SoC.
 
+config SUNXI_RVBAR_ALTERNATIVE
+	hex
+	depends on ARM64
+	default 0x81000040 if MACH_SUN50I_H616

As discussed on IRC by warpme, above default has a typo.

Apart from that, changes look good, so once fixed:

Best regards,
Jernej

Quoted 13 lines
arch/arm/mach-sunxi/Kconfig +11 -0
+	default 0x09010040 if SUN50I_GEN_H6
+	default 0x017000a0
+	---help---
+	The H616 die exists is at least two variants, with one having the
+	RVBAR registers at a different address. If the SoC variant ID
+	(stored in SRAM_VER_REG[7:0]) is not 0, we need to use the
+	other address.
+	Set this alternative address to the same as the normal address
+	for all other SoCs, so the content of the SRAM_VER_REG becomes
+	irrelevant there, and we can use the same code.
+
 config SUNXI_A64_TIMER_ERRATUM
 	bool