Add splash screen support at u-boot SPL
Subsystems (2)
v7 cover Add splash screen support at u-boot SPL
To enable splash screen at SPL stage move video driver and splash screen framework at SPL, which will bring up image on display very quickly and thus have early display support in SPL.
Changes in V7
- Replace #ifdefs' and #ifs' with if in common/splash and common/bmp.
- Add Reviewed-by and Tested-by tag in apprpriate patch.
Changes in V6
- Fix commit messages.
- Fix compile rules for video related files in patch
drivers: video: Makefile: Rule to compile necessary video driver files.
Changes in V5
- Drop patch cmd: Makefile: Rule to compile bmp_cmd.
- Squash common: splash: Replace CONFIG_CMD_BMP patch into patches
common: Enable splash functions at SPL
include: Enable video related global data variable and splash at SPL
- Fix merge issue for next branch.
- Replace cmd/bmp_cmd with cmd/bmp.
- Use CONFIG_$(SPL_TPL_) to compile files in
drivers: video: Makefile: Rule to compile necessary video driver files.
- Add Reviewed-by tag in apprpriate patch.
Changes in V4
- Add Reviewed-by tag in apprpriate patch.
Changes in V3
- Add separate video configs for SPL splash screen.
- Add rule to compile video driver in drivers/Makefile at SPL.
- Add rule to compile splash.c and splash_source.c.
- Squash drivers: video: video-uclass: Disable u-boot logo at SPL into
drivers: video: Use CONFIG_IS_ENABLED and CONFIG_VAL.
- Split cmd/bmp.c to separate bmp functions and commands.
- Add CONFIG_BMP and CONFIG_SPL_BMP.
- Add rule to compile necessary files required for video driver.
- Add rule to compile common/bmp.c.
Changes in V2
- Removed artifacts from bad patch apply.
Nikhil M Jain (14):
drivers: video: Kconfig: Add configs for enabling video at SPL
drivers: video: tidss: Kconfig: Configs to enable TIDSS at SPL
drivers: Makefile: Add rule to compile video driver
drivers: video: Makefile: Rule to compile necessary video driver files
drivers: video: tidss: Makefile: Add condition to compile TIDSS at SPL
common: Makefile: Add rule to compile splash and splash_source at SPL
common: Kconfig: Add BMP configs
cmd: bmp: Split bmp commands and functions
common: Makefile: Rule to compile bmp.c
drivers: video: Enable necessary video functions at SPL
common: Enable splash functions at SPL
include: Enable video related global data variable and splash at SPL
board: ti: am62x: evm: OSPI support for splash screen
common: Replace #ifdef and #if with if's
board/ti/am62x/evm.c | 8 +- cmd/bmp.c | 162 +--------------------- common/Kconfig | 12 ++ common/Makefile | 3 + common/bmp.c | 147 ++++++++++++++++++++ common/splash.c | 18 +-- drivers/Makefile | 1 + drivers/video/Kconfig | 223 +++++++++++++++++++++++++++++- drivers/video/Makefile | 16 +-- drivers/video/console_core.c | 6 +- drivers/video/tidss/Kconfig | 6 + drivers/video/tidss/Makefile | 2 +- drivers/video/vidconsole-uclass.c | 2 +- drivers/video/video-uclass.c | 14 +- drivers/video/video_bmp.c | 8 +- include/asm-generic/global_data.h | 4 +- include/splash.h | 16 +-- include/video.h | 8 ++ 18 files changed, 445 insertions(+), 211 deletions(-) create mode 100644 common/bmp.c
Signature · 1 line
2.34.1
PATCH v7 1/14 drivers: video: Kconfig: Add configs for enabling video at SPL
Add Kconfigs which enable the video driver and splash screen at SPL stage only and not at u-boot proper. The existing Kconfigs from u-boot proper were not used to make SPL splash screen independent to them.
---
V7:
- Add Reviewed-by and Tested-by tag.
V6:
- Replace CMD_BMP with BMP.
V5:
- Added Reviewed-by tag.
V4:
- No change.
V3:
- Add separate SPL video and splash configs.
- Reviewed-by tag not added due to additional changes in V3.
V2:
- No change.
drivers/video/Kconfig | 223 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 222 insertions(+), 1 deletion(-)
drivers/video/Kconfig +222 -1
@@ -893,7 +893,7 @@ endif # SPLASH_SCREEN config VIDEO_BMP_GZIP bool "Gzip compressed BMP image support" - depends on CMD_BMP || SPLASH_SCREEN + depends on BMP || SPLASH_SCREEN help If this option is set, additionally to standard BMP images, gzipped BMP images can be displayed via the
@@ -930,4 +930,225 @@ config BMP_32BPP endif # VIDEO +config SPL_VIDEO + bool "Enable driver model support for LCD/video" + depends on SPL_DM + help + The video subsystem adds a small amount of overhead to the image. + If this is acceptable and you have a need to use video drivers in + SPL, enable this option. It might provide a cleaner interface to + setting up video within SPL, and allows the same drivers to be + used as U-Boot proper. + +if SPL_VIDEO +source "drivers/video/tidss/Kconfig" + +config SPL_VIDEO_LOGO + bool "Show the U-Boot logo on the display atSPL" + default y if !SPL_SPLASH_SCREEN + select SPL_VIDEO_BMP_RLE8 + help + This enables showing the U-Boot logo on the display when a video + device is probed. It appears at the top right. The logo itself is at + tools/logos/u-boot_logo.bmp and looks best when the display has a + black background. + +config SPL_SPLASH_SCREEN + bool "Show a splash-screen image at SPL" + help + If this option is set, the environment is checked for a variable + "splashimage" at spl stage. + +config SPL_SYS_WHITE_ON_BLACK + bool "Display console as white on a black background at SPL" + help + Normally the display is black on a white background, Enable this + option to invert this, i.e. white on a black background at spl stage. + This can be better in low-light situations or to reduce eye strain in + some cases. + +config SPL_VIDEO_PCI_DEFAULT_FB_SIZE + hex "Default framebuffer size to use if no drivers request it at SPL" + default 0x1000000 if X86 && PCI + default 0 if !(X86 && PCI) + help + Generally, video drivers request the amount of memory they need for + the frame buffer when they are bound, by setting the size field in + struct video_uc_plat. That memory is then reserved for use after + relocation. But PCI drivers cannot be bound before relocation unless + they are mentioned in the devicetree. + + With this value set appropriately, it is possible for PCI video + devices to have a framebuffer allocated by U-Boot. + + Note: the framebuffer needs to be large enough to store all pixels at + maximum resolution. For example, at 1920 x 1200 with 32 bits per + pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. + +config SPL_CONSOLE_SCROLL_LINES + int "Number of lines to scroll the console by at SPL" + default 1 + help + When the console need to be scrolled, this is the number of + lines to scroll by. It defaults to 1. Increasing this makes the + console jump but can help speed up operation when scrolling + is slow. + +config SPL_CONSOLE_NORMAL + bool "Support a simple text console at SPL" + default y + help + Support drawing text on the frame buffer console so that it can be + used as a console. Rotation is not supported by this driver (see + CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used + for the display. + +config SPL_BACKLIGHT + bool "Enable panel backlight uclass support at SPL" + default y + help + This provides backlight uclass driver that enables basic panel + backlight support. + +config SPL_PANEL + bool "Enable panel uclass support at SPL" + default y + help + This provides panel uclass driver that enables basic panel support. + +config SPL_SIMPLE_PANEL + bool "Enable simple panel support at SPL" + depends on SPL_PANEL && SPL_BACKLIGHT && SPL_DM_GPIO + default y + help + This turns on a simple panel driver that enables a compatible + video panel. + +config SPL_SYS_WHITE_ON_BLACK + bool "Display console as white on a black background at SPL" + help + Normally the display is black on a white background, Enable this + option to invert this, i.e. white on a black background at spl stage. + This can be better in low-light situations or to reduce eye strain in + some cases. + +if SPL_SPLASH_SCREEN + +config SPL_SPLASH_SCREEN_ALIGN + bool "Allow positioning the splash image anywhere on the display at SPL" + help + If this option is set the splash image can be freely positioned + on the screen only at SPL. Environment variable "splashpos" specifies + the position as "x,y". If a positive number is given it is used as + number of pixel from left/top. If a negative number is given it + is used as number of pixel from right/bottom. + +config SPL_SPLASH_SOURCE + bool "Control the source of the splash image at SPL" + help + Use the splash_source.c library. This library provides facilities to + declare board specific splash image locations, routines for loading + splash image from supported locations, and a way of controlling the + selected splash location using the "splashsource" environment + variable. + + This CONFIG works as follows: + + - If splashsource is set to a supported location name as defined by + board code, use that splash location. + - If splashsource is undefined, use the first splash location as + default. + - If splashsource is set to an unsupported value, do not load a splash + screen. + + A splash source location can describe either storage with raw data, a + storage formatted with a file system or a FIT image. In case of a + filesystem, the splash screen data is loaded as a file. The name of + the splash screen file can be controlled with the environment variable + "splashfile". + + To enable loading the splash image from a FIT image, CONFIG_FIT must + be enabled. The FIT image has to start at the 'offset' field address + in the selected splash location. The name of splash image within the + FIT shall be specified by the environment variable "splashfile". + + In case the environment variable "splashfile" is not defined the + default name 'splash.bmp' will be used. + +endif # SPL_SPLASH_SCREEN + +config SPL_VIDEO_BMP_GZIP + bool "Gzip compressed BMP image support at SPL" + depends on SPL_SPLASH_SCREEN || SPL_BMP + help + If this option is set, additionally to standard BMP + images, gzipped BMP images can be displayed via the + splashscreen supportat SPL stage. + +config SPL_VIDEO_LOGO_MAX_SIZE + hex "Maximum size of the bitmap logo in bytes at SPL" + default 0x100000 + help + Sets the maximum uncompressed size of the logo. This is needed when + decompressing a BMP file using the gzip algorithm, since it cannot + read the size from the bitmap header. + +config SPL_VIDEO_BMP_RLE8 + bool "Run length encoded BMP image (RLE8) support at SPL" + help + If this option is set, the 8-bit RLE compressed BMP images + is supported. + +config SPL_BMP_16BPP + bool "16-bit-per-pixel BMP image support at SPL" + help + Support display of bitmaps file with 16-bit-per-pixel + +config SPL_BMP_24BPP + bool "24-bit-per-pixel BMP image support at SPL" + help + Support display of bitmaps file with 24-bit-per-pixel. + +config SPL_BMP_32BPP + bool "32-bit-per-pixel BMP image support at SPL" + help + Support display of bitmaps file with 32-bit-per-pixel. + +config SPL_VIDEO_BPP8 + bool "Support 8-bit-per-pixel displays at SPL" + default y + help + Support drawing text and bitmaps onto a 8-bit-per-pixel display. + Enabling this will include code to support this display. Without + this option, such displays will not be supported and console output + will be empty. + +config SPL_VIDEO_BPP16 + bool "Support 16-bit-per-pixel displays at SPL" + default y + help + Support drawing text and bitmaps onto a 16-bit-per-pixel display. + Enabling this will include code to support this display. Without + this option, such displays will not be supported and console output + will be empty. + +config SPL_VIDEO_BPP32 + bool "Support 32-bit-per-pixel displays at SPL" + default y + help + Support drawing text and bitmaps onto a 32-bit-per-pixel display. + Enabling this will include code to support this display. Without + this option, such displays will not be supported and console output + will be empty. + +config SPL_HIDE_LOGO_VERSION + bool "Hide the version information on the splash screen at SPL" + help + Normally the U-Boot version string is shown on the display when the + splash screen is enabled. This information is not otherwise visible + since video starts up after U-Boot has displayed the initial banner. + + Enable this option to hide this information. +endif + endmenu
Signature · 1 line
2.34.1
PATCH v7 2/14 drivers: video: tidss: Kconfig: Configs to enable TIDSS at SPL
In reply to Nikhil M JainTo enable tidss display driver only at SPL stage, add necessary config, CONFIG_SPL_VIDEO_TIDSS.
---
V7:
- No change
V6:
- Fix commit message.
- Add Reviewed-By tag.
V5:
- No change
V4:
- Add Reviewed-By tag
V3:
- No change
V2:
- No change
drivers/video/tidss/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/video/tidss/Kconfig +6 -0
@@ -16,3 +16,9 @@ menuconfig VIDEO_TIDSS DPI . This option enables these supports which can be used on devices which have OLDI or HDMI display connected. +config SPL_VIDEO_TIDSS + bool "Enable TIDSS video support in SPL Stage" + depends on SPL_VIDEO + help + This options enables tidss driver in SPL stage. If + you need to use tidss at SPL stage use this config.
Signature · 1 line
2.34.1
PATCH v7 3/14 drivers: Makefile: Add rule to compile video driver
In reply to Nikhil M JainCompile video driver at SPL using CONFIG_SPL_VIDEO.
---
V7:
- Add Reviewed-by and Tested-by tag.
V6:
- Add Reviewed-by tag
- Commit message updated.
V5:
- Add rule to build video at SPL using CONFIG_SPL_VIDEO and retain obj-y +=video for u-boot proper.
V4:
- No change
V3 (patch introduced):
- Add rule to compile video driver at SPL.
drivers/Makefile | 1 + 1 file changed, 1 insertion(+)
drivers/Makefile +1 -0
@@ -61,6 +61,7 @@ obj-$(CONFIG_SPL_USB_HOST) += usb/host/ obj-$(CONFIG_SPL_SATA) += ata/ scsi/ obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/ obj-$(CONFIG_SPL_THERMAL) += thermal/ +obj-$(CONFIG_SPL_VIDEO) +=video/ endif endif
Signature · 1 line
2.34.1
PATCH v7 4/14 drivers: video: Makefile: Rule to compile necessary video driver files
In reply to Nikhil M JainTo enable video driver at SPL, need to compile video-uclass, vidconsole-uclass, backlight-uclass, panel-uclass, simple-panel, add rules to compile them at SPL and u-boot proper. To support splash_display at SPL, need to compile video-bmp, add rule to compile at SPL and u-boot proper.
---
V7:
- Add Reviewed-by and Tested-by tag.
V6:
- Fix CONFIG_$(SPL_TPL)CONSOLE_NORMAL to CONFIG_$(SPL_TPL_)CONSOLE_NORMAL
- Add rule to compile simple_panel at SPL and u-boot proper.
V5:
- Use $(SPL_TPL_) to check for stage specific configs and compile at specific stages.
- Removed ifdef CONFIG_SPL_BUILD
V4:
- No change
V3:
- Rule to compile backlight, console and panel files
- Not added Reiewed-by tag due to changes
V2:
- No change
drivers/video/Makefile | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/video/Makefile +7 -7
@@ -4,12 +4,12 @@ # Wolfgang Denk, DENX Software Engineering, [email protected]. ifdef CONFIG_DM -obj-$(CONFIG_BACKLIGHT) += backlight-uclass.o +obj-$(CONFIG_$(SPL_TPL_)BACKLIGHT) += backlight-uclass.o obj-$(CONFIG_BACKLIGHT_GPIO) += backlight_gpio.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o -obj-$(CONFIG_CONSOLE_NORMAL) += console_normal.o +obj-$(CONFIG_$(SPL_TPL_)CONSOLE_NORMAL) += console_normal.o obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o -ifdef CONFIG_CONSOLE_NORMAL +ifdef CONFIG_$(SPL_TPL_)CONSOLE_NORMAL obj-y += console_core.o else ifdef CONFIG_CONSOLE_ROTATION obj-y += console_core.o
@@ -18,11 +18,11 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_core.o obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/ obj-$(CONFIG_DISPLAY) += display-uclass.o obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o -obj-$(CONFIG_VIDEO) += video-uclass.o vidconsole-uclass.o -obj-$(CONFIG_VIDEO) += video_bmp.o -obj-$(CONFIG_PANEL) += panel-uclass.o +obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video-uclass.o vidconsole-uclass.o +obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video_bmp.o +obj-$(CONFIG_$(SPL_TPL_)PANEL) += panel-uclass.o obj-$(CONFIG_PANEL_HX8238D) += hx8238d.o -obj-$(CONFIG_SIMPLE_PANEL) += simple_panel.o +obj-$(CONFIG_$(SPL_TPL_)SIMPLE_PANEL) += simple_panel.o obj-$(CONFIG_VIDEO_LOGO) += u_boot_logo.o
Signature · 1 line
2.34.1
PATCH v7 5/14 drivers: video: tidss: Makefile: Add condition to compile TIDSS at SPL
In reply to Nikhil M JainTo enable TIDSS driver only at SPL stage add rule to compile the TIDSS video driver.
CONFIG_$(SPL_)VIDEO_TIDSS will compile tidss_drv, at SPL only if CONFIG_SPL_VIDEO_TIDSS is defined and at u-boot proper if CONFIG_VIDEO_TIDSS is defined.
---
V7:
- No change.
V6:
- No change.
V5:
- Use CONFIG_$(SPL_)VIDEO_TIDSS to build TIDSS driver at SPL and u-boot proper.
V4:
- Added Reviewed-by tag.
V3:
- No change.
V2:
- No change.
drivers/video/Makefile | 2 +- drivers/video/tidss/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/video/Makefile +1 -1
@@ -32,7 +32,7 @@ obj-${CONFIG_EXYNOS_FB} += exynos/ obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/ obj-${CONFIG_VIDEO_STM32} += stm32/ obj-${CONFIG_VIDEO_TEGRA124} += tegra124/ -obj-${CONFIG_VIDEO_TIDSS} += tidss/ +obj-${CONFIG_$(SPL_)VIDEO_TIDSS} += tidss/ obj-y += ti/ obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
drivers/video/tidss/Makefile +1 -1
@@ -9,4 +9,4 @@ # Author: Tomi Valkeinen <[email protected]> -obj-${CONFIG_VIDEO_TIDSS} = tidss_drv.o +obj-${CONFIG_$(SPL_)VIDEO_TIDSS} = tidss_drv.o
Signature · 1 line
2.34.1
PATCH v7 6/14 common: Makefile: Add rule to compile splash and splash_source at SPL
In reply to Nikhil M JainTo enable splash screen and loading bmp from boot media, add rules to compile splash.c and splash_source.c at SPL stage only when CONFIG_SPL_SPLASH_SCREEN and CONFIG_SPL_SPLASH_SOURCE are defined.
---
V7:
- Add Reviewed-by tag.
V6:
- Add Reviewed-by tag.
V5:
- No change
V4:
- No change
common/Makefile | 2 ++ 1 file changed, 2 insertions(+)
common/Makefile +2 -0
@@ -56,6 +56,8 @@ obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o obj-$(CONFIG_SPL_USB_HOST) += usb.o usb_hub.o obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o obj-$(CONFIG_SPL_MUSB_NEW) += usb.o +obj-$(CONFIG_SPL_SPLASH_SCREEN) += splash.o +obj-$(CONFIG_SPL_SPLASH_SOURCE) += splash_source.o endif # CONFIG_SPL_BUILD #others
Signature · 1 line
2.34.1
PATCH v7 7/14 common: Kconfig: Add BMP configs
In reply to Nikhil M JainAdd CONFIG_BMP and CONFIG_SPL_BMP which enable displaying bmp images at u-boot proper and SPL.
---
V7:
- No change.
V6:
- Added Reviewed-by tag.
V5:
- Added Reviewed-by tag.
V4:
- No change.
common/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+)
common/Kconfig +12 -0
@@ -1154,3 +1154,15 @@ config FDT_SIMPLEFB config IO_TRACE bool + +config BMP + bool "Enable bmp image display" + default y if CMD_BMP + help + Enable bmp functions to display bmp image and get bmp info. + +config SPL_BMP + bool "Enable bmp image display at SPL" + depends on SPL_VIDEO + help + Enable bmp functions to display bmp image and get bmp info at SPL.
Signature · 1 line
2.34.1
PATCH v7 8/14 cmd: bmp: Split bmp commands and functions
In reply to Nikhil M JainTo enable splash screen at SPL, need to compile cmd/bmp.c which also includes bmp commands, since SPL doesn't use commands split bmp.c into common/bmp.c which includes all bmp functions and cmd/bmp.c which only contains bmp commands.
Add function delclaration for bmp_info in video.h.
---
V7:
- No change.
V6:
- Fix commit message.
- Remove unused header files.
V5:
- Rename cmd/bmp_cmd to cmd/bmp.
V4:
- No change.
V3 (patch introduced):
- Split bmp functions and commands.
cmd/bmp.c | 162 +----------------------------------------------- common/bmp.c | 153 +++++++++++++++++++++++++++++++++++++++++++++ include/video.h | 8 +++ 3 files changed, 163 insertions(+), 160 deletions(-) create mode 100644 common/bmp.c
cmd/bmp.c +2 -160
@@ -9,84 +9,12 @@*/ #include <common.h> -#include <bmp_layout.h> #include <command.h> -#include <dm.h> -#include <gzip.h> #include <image.h> -#include <log.h> -#include <malloc.h> #include <mapmem.h> #include <splash.h> #include <video.h> -#include <asm/byteorder.h> - -static int bmp_info (ulong addr); - -/* -* Allocate and decompress a BMP image using gunzip(). -* -* Returns a pointer to the decompressed image data. This pointer is -* aligned to 32-bit-aligned-address + 2. -* See doc/README.displaying-bmps for explanation. -* -* The allocation address is passed to 'alloc_addr' and must be freed -* by the caller after use. -* -* Returns NULL if decompression failed, or if the decompressed data -* didn't contain a valid BMP signature. -*/ -#ifdef CONFIG_VIDEO_BMP_GZIP -struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp, -void **alloc_addr) -{ -void *dst; -unsigned long len; -struct bmp_image *bmp; - -/* -* Decompress bmp image -*/ - len =CONFIG_VIDEO_LOGO_MAX_SIZE ; -/* allocate extra 3 bytes for 32-bit-aligned-address + 2 alignment */ - dst =malloc (CONFIG_VIDEO_LOGO_MAX_SIZE +3 ); -if (!dst) { -puts ("Error: malloc in gunzip failed!\n" ); -return NULL ; - } - -/* align to 32-bit-aligned-address + 2 */ - bmp = dst +2 ; - -if (gunzip (bmp,CONFIG_VIDEO_LOGO_MAX_SIZE ,map_sysmem (addr,0 ), - &len)) { -free (dst); -return NULL ; - } -if (len ==CONFIG_VIDEO_LOGO_MAX_SIZE ) -puts ("Image could be truncated (increase CONFIG_VIDEO_LOGO_MAX_SIZE)!\n" ); - -/* -* Check for bmp mark 'BM' -*/ -if (!((bmp->header.signature[0 ] =='B' ) && - (bmp->header.signature[1 ] =='M' ))) { -free (dst); -return NULL ; - } - -debug ("Gzipped BMP image detected!\n" ); - - *alloc_addr = dst; -return bmp; -} -#else -struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp, -void **alloc_addr) -{ -return NULL ; -} -#endif +#include <stdlib.h> static int do_bmp_info (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[])
@@ -137,7 +65,7 @@ static int do_bmp_display(struct cmd_tbl *cmdtp, int flag, int argc,return CMD_RET_USAGE ; } -return (bmp_display (addr, x, y)); +return (bmp_display (addr, x, y)); }static struct cmd_tbl cmd_bmp_sub[] = {
@@ -145,22 +73,6 @@ static struct cmd_tbl cmd_bmp_sub[] = { U_BOOT_CMD_MKENT(display, 5, 0, do_bmp_display, "", ""), }; -#ifdef CONFIG_NEEDS_MANUAL_RELOC -void bmp_reloc (void ) { -fixup_cmdtable (cmd_bmp_sub,ARRAY_SIZE (cmd_bmp_sub)); -} -#endif - -/* -* Subroutine: do_bmp -* -* Description: Handler for 'bmp' command.. -* -* Inputs: argv[1] contains the subcommand -* -* Return: None -* -*/ static int do_bmp (struct cmd_tbl *cmdtp,int flag,int argc,char *const argv[]) {struct cmd_tbl *c;
@@ -183,73 +95,3 @@ U_BOOT_CMD("info <imageAddr> - display image info\n" "bmp display <imageAddr> [x y] - display image at x,y" ); - -/* -* Subroutine: bmp_info -* -* Description: Show information about bmp file in memory -* -* Inputs: addr address of the bmp file -* -* Return: None -* -*/ -static int bmp_info (ulong addr) -{ -struct bmp_image *bmp = (struct bmp_image *)map_sysmem (addr,0 ); -void *bmp_alloc_addr =NULL ; -unsigned long len; - -if (!((bmp->header.signature[0 ]=='B' ) && - (bmp->header.signature[1 ]=='M' ))) - bmp =gunzip_bmp (addr, &len, &bmp_alloc_addr); - -if (bmp ==NULL ) { -printf ("There is no valid bmp file at the given address\n" ); -return 1 ; - } - -printf ("Image size : %d x %d\n" ,le32_to_cpu (bmp->header.width), -le32_to_cpu (bmp->header.height)); -printf ("Bits per pixel: %d\n" ,le16_to_cpu (bmp->header.bit_count)); -printf ("Compression : %d\n" ,le32_to_cpu (bmp->header.compression)); - -if (bmp_alloc_addr) -free (bmp_alloc_addr); - -return (0 ); -} - -int bmp_display (ulong addr,int x,int y) -{ -struct udevice *dev; -int ret; -struct bmp_image *bmp =map_sysmem (addr,0 ); -void *bmp_alloc_addr =NULL ; -unsigned long len; - -if (!((bmp->header.signature[0 ]=='B' ) && - (bmp->header.signature[1 ]=='M' ))) - bmp =gunzip_bmp (addr, &len, &bmp_alloc_addr); - -if (!bmp) { -printf ("There is no valid bmp file at the given address\n" ); -return 1 ; - } - addr =map_to_sysmem (bmp); - - ret =uclass_first_device_err (UCLASS_VIDEO , &dev); -if (!ret) { -bool align = false; - -if (x ==BMP_ALIGN_CENTER || y ==BMP_ALIGN_CENTER ) - align = true; - - ret =video_bmp_display (dev, addr, x, y, align); - } - -if (bmp_alloc_addr) -free (bmp_alloc_addr); - -return ret ?CMD_RET_FAILURE :0 ; -}
common/bmp.c new file +153 -0
153 lines not on this page · raw message
include/video.h +8 -0
@@ -357,4 +357,12 @@ void *video_get_u_boot_logo(void);*/ int bmp_display (ulong addr,int x,int y); +/* +* bmp_info() - Show information about bmp file +* +* @addr: address of bmp file +* Returns: 0 if OK, else 1 if bmp image not found +*/ +int bmp_info (ulong addr); +#endif
Signature · 1 line
2.34.1
PATCH v7 9/14 common: Makefile: Rule to compile bmp.c
In reply to Nikhil M JainAdd rule to compile bmp.c at SPL and u-boot proper when CONFIG_SPL_BMP and CONFIG_BMP are defined.
---
V7:
- Add Reviewed-by and Tested-by tag.
V6:
- Add Reviewed-by tag.
V5:
- Remove obj-y+= read.o.
V4:
- No change.
V3 (patch introduced):
- Rule to compile common/bmp.
common/Makefile | 1 + 1 file changed, 1 insertion(+)
common/Makefile +1 -0
@@ -45,6 +45,7 @@ endif # !CONFIG_SPL_BUILD obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o +obj-$(CONFIG_$(SPL_)BMP) += bmp.o ifdef CONFIG_SPL_BUILD ifdef CONFIG_SPL_DFU
Signature · 1 line
2.34.1
PATCH v7 10/14 drivers: video: Enable necessary video functions at SPL
In reply to Nikhil M JainTo support video driver at SPL use CONFIG_IS_ENABLED and CONFIG_VAL, which checks for stage specific configs and thus enables video support at respective stage.
---
V7:
- Add Reviewed-by and Tested-by tag.
V6:
- No change.
V5:
- Add Reviewed-By tag.
- Use COFIG_IS_ENABLED in console_core in place of console_normal.
V4:
- No change.
V3 (patch introduced):
- Enable necessary video functions at SPL.
drivers/video/console_core.c | 6 +++--- drivers/video/vidconsole-uclass.c | 2 +- drivers/video/video-uclass.c | 14 +++++++------- drivers/video/video_bmp.c | 8 ++++---- 4 files changed, 15 insertions(+), 15 deletions(-)
drivers/video/console_core.c +3 -3
@@ -46,11 +46,11 @@ static int console_set_font(struct udevice *dev, struct video_fontdata *fontdataint check_bpix_support (int bpix) { -if (bpix ==VIDEO_BPP8 &&IS_ENABLED (CONFIG_VIDEO_BPP8 )) +if (bpix ==VIDEO_BPP8 &&CONFIG_IS_ENABLED (VIDEO_BPP8 ))return 0 ; -else if (bpix ==VIDEO_BPP16 &&IS_ENABLED (CONFIG_VIDEO_BPP16 )) +else if (bpix ==VIDEO_BPP16 &&CONFIG_IS_ENABLED (VIDEO_BPP16 ))return 0 ; -else if (bpix ==VIDEO_BPP32 &&IS_ENABLED (CONFIG_VIDEO_BPP32 )) +else if (bpix ==VIDEO_BPP32 &&CONFIG_IS_ENABLED (VIDEO_BPP32 ))return 0 ;else return -ENOSYS ;
drivers/video/vidconsole-uclass.c +1 -1
@@ -86,7 +86,7 @@ static void vidconsole_newline(struct udevice *dev)struct vidconsole_priv *priv =dev_get_uclass_priv (dev);struct udevice *vid_dev = dev->parent;struct video_priv *vid_priv =dev_get_uclass_priv (vid_dev); -const int rows =CONFIG_CONSOLE_SCROLL_LINES ; +const int rows =CONFIG_VAL (CONSOLE_SCROLL_LINES );int i, ret; priv->xcur_frac = priv->xstart_frac;
drivers/video/video-uclass.c +7 -7
@@ -132,7 +132,7 @@ int video_reserve(ulong *addrp)/* Allocate space for PCI video devices in case there were not bound */ if (*addrp == gd->video_top) - *addrp -=CONFIG_VIDEO_PCI_DEFAULT_FB_SIZE ; + *addrp -=CONFIG_VAL (VIDEO_PCI_DEFAULT_FB_SIZE ); gd->video_bottom = *addrp; gd->fb_base = *addrp;
@@ -149,7 +149,7 @@ int video_fill(struct udevice *dev, u32 colour)switch (priv->bpix) {case VIDEO_BPP16 : -if (IS_ENABLED (CONFIG_VIDEO_BPP16 )) { +if (CONFIG_IS_ENABLED (VIDEO_BPP16 )) {u16 *ppix = priv->fb;u16 *end = priv->fb + priv->fb_size;
@@ -158,7 +158,7 @@ int video_fill(struct udevice *dev, u32 colour)break ; }case VIDEO_BPP32 : -if (IS_ENABLED (CONFIG_VIDEO_BPP32 )) { +if (CONFIG_IS_ENABLED (VIDEO_BPP32 )) {u32 *ppix = priv->fb;u32 *end = priv->fb + priv->fb_size;
@@ -212,14 +212,14 @@ u32 video_index_to_colour(struct video_priv *priv, unsigned int idx) {switch (priv->bpix) {case VIDEO_BPP16 : -if (IS_ENABLED (CONFIG_VIDEO_BPP16 )) { +if (CONFIG_IS_ENABLED (VIDEO_BPP16 )) {return ((colours[idx].r >>3 ) <<11 ) | ((colours[idx].g >>2 ) <<5 ) | ((colours[idx].b >>3 ) <<0 ); }break ;case VIDEO_BPP32 : -if (IS_ENABLED (CONFIG_VIDEO_BPP32 )) { +if (CONFIG_IS_ENABLED (VIDEO_BPP32 )) {if (priv->format ==VIDEO_X2R10G10B10 )return (colours[idx].r <<22 ) | (colours[idx].g << 12) |
@@ -513,8 +513,8 @@ static int video_post_probe(struct udevice *dev)return ret; } -if (IS_ENABLED (CONFIG_VIDEO_LOGO ) && - !IS_ENABLED (CONFIG_SPLASH_SCREEN ) && !plat->hide_logo) { +if (CONFIG_IS_ENABLED (VIDEO_LOGO ) && + !CONFIG_IS_ENABLED (SPLASH_SCREEN ) && !plat->hide_logo) { ret =show_splash (dev);if (ret) {log_debug ("Cannot show splash screen\n" );
drivers/video/video_bmp.c +4 -4
@@ -320,7 +320,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y,switch (bmp_bpix) {case 1 :case 8 : -if (IS_ENABLED (CONFIG_VIDEO_BMP_RLE8 )) { +if (CONFIG_IS_ENABLED (VIDEO_BMP_RLE8 )) {u32 compression =get_unaligned_le32 ( &bmp->header.compression);debug ("compressed %d %d\n" , compression,BMP_BI_RLE8 );
@@ -348,7 +348,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, }break ;case 16 : -if (IS_ENABLED (CONFIG_BMP_16BPP )) { +if (CONFIG_IS_ENABLED (BMP_16BPP )) {for (i =0 ; i < height; ++i) {schedule ();for (j =0 ; j < width; j++) {
@@ -361,7 +361,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, }break ;case 24 : -if (IS_ENABLED (CONFIG_BMP_24BPP )) { +if (CONFIG_IS_ENABLED (BMP_24BPP )) {for (i =0 ; i < height; ++i) {for (j =0 ; j < width; j++) {if (bpix ==16 ) {
@@ -395,7 +395,7 @@ int video_bmp_display(struct udevice *dev, ulong bmp_image, int x, int y, }break ;case 32 : -if (IS_ENABLED (CONFIG_BMP_32BPP )) { +if (CONFIG_IS_ENABLED (BMP_32BPP )) {for (i =0 ; i < height; ++i) {for (j =0 ; j < width; j++) {if (eformat ==VIDEO_X2R10G10B10 ) {
Signature · 1 line
2.34.1
PATCH v7 11/14 common: Enable splash functions at SPL
In reply to Nikhil M JainTo support splash screen at both u-boot proper and SPL use CONFIG_IS_ENABLED and CONFIG_VAL to check for video related Kconfigs at respective stages.
Replace CONFIG_CMD_BMP with CONFIG_BMP to enable splash_display function at u-boot proper and SPL.
---
V7:
- Add Reviewed-by tag.
V6:
- Fix commit message.
- Add Reviewed-by tag.
V5:
- Replace CONFIG_CMD_BMP with CONFIG_BMP.
V4:
- No change
V3 (patch introduced):
- Enable splash functions at SPL
common/bmp.c | 12 ++++++------ common/splash.c | 10 +++++----- include/splash.h | 2 +- 3 files changed, 12 insertions(+), 12 deletions(-)
common/bmp.c +6 -6
@@ -33,7 +33,7 @@* Returns NULL if decompression failed, or if the decompressed data * didn't contain a valid BMP signature. */ -#ifdef CONFIG_VIDEO_BMP_GZIP +#if CONFIG_IS_ENABLED (VIDEO_BMP_GZIP )struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp,void **alloc_addr) {
@@ -44,9 +44,9 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,/* * Decompress bmp image */ - len =CONFIG_VIDEO_LOGO_MAX_SIZE ; + len =CONFIG_VAL (VIDEO_LOGO_MAX_SIZE );/* allocate extra 3 bytes for 32-bit-aligned-address + 2 alignment */ - dst =malloc (CONFIG_VIDEO_LOGO_MAX_SIZE +3 ); + dst =malloc (CONFIG_VAL (VIDEO_LOGO_MAX_SIZE ) +3 );if (!dst) {puts ("Error: malloc in gunzip failed!\n" );return NULL ;
@@ -55,12 +55,12 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,/* align to 32-bit-aligned-address + 2 */ bmp = dst +2 ; -if (gunzip (bmp,CONFIG_VIDEO_LOGO_MAX_SIZE ,map_sysmem (addr,0 ), +if (gunzip (bmp,CONFIG_VAL (VIDEO_LOGO_MAX_SIZE ),map_sysmem (addr,0 ), &len)) {free (dst);return NULL ; } -if (len ==CONFIG_VIDEO_LOGO_MAX_SIZE ) +if (len ==CONFIG_VAL (VIDEO_LOGO_MAX_SIZE ))puts ("Image could be truncated (increase CONFIG_VIDEO_LOGO_MAX_SIZE)!\n" );/*
@@ -115,7 +115,7 @@ int bmp_info(ulong addr)if (bmp_alloc_addr)free (bmp_alloc_addr); -return 0 ; +return (0 ); }int bmp_display (ulong addr,int x,int y)
common/splash.c +5 -5
@@ -89,14 +89,14 @@ static inline int splash_video_logo_load(void) { return -ENOSYS; }__weak int splash_screen_prepare (void ) { -if (IS_ENABLED (CONFIG_SPLASH_SOURCE )) +if (CONFIG_IS_ENABLED (SPLASH_SOURCE ))return splash_source_load (default_splash_locations,ARRAY_SIZE (default_splash_locations));return splash_video_logo_load (); } -#ifdef CONFIG_SPLASH_SCREEN_ALIGN +#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y) {char *s =env_get ("splashpos" );
@@ -119,7 +119,7 @@ void splash_get_pos(int *x, int *y) }#endif /* CONFIG_SPLASH_SCREEN_ALIGN */ -#if defined(CONFIG_VIDEO ) && !defined(CONFIG_HIDE_LOGO_VERSION ) +#if CONFIG_IS_ENABLED (VIDEO ) && !CONFIG_IS_ENABLED (HIDE_LOGO_VERSION )#ifdef CONFIG_VIDEO_LOGO #include <bmp_logo.h>
@@ -159,7 +159,7 @@ void splash_display_banner(void)* Common function to show a splash image if env("splashimage") is set. * For additional details please refer to doc/README.splashprepare. */ -#if defined(CONFIG_SPLASH_SCREEN ) && defined(CONFIG_CMD_BMP ) +#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP )int splash_display (void ) {ulong addr;
@@ -183,7 +183,7 @@ int splash_display(void)if (x || y) goto end; -#if defined(CONFIG_VIDEO ) && !defined(CONFIG_HIDE_LOGO_VERSION ) +#if CONFIG_IS_ENABLED (VIDEO ) && !CONFIG_IS_ENABLED (HIDE_LOGO_VERSION )splash_display_banner ();#endif end:
include/splash.h +1 -1
@@ -78,4 +78,4 @@ static inline int splash_display(void)#define BMP_ALIGN_CENTER 0x7FFF -#endif +#endif
Signature · 1 line
2.34.1
Re: [PATCH V7 11/14] common: Enable splash functions at SPL
Hi,
Quoted 32 lines · On Mon, 10 Apr 2023 12:58:40 +0530 Nikhil M Jain wrote:
To support splash screen at both u-boot proper and SPL use
CONFIG_IS_ENABLEDandCONFIG_VALto check for video related Kconfigs at respective stages.Replace
CONFIG_CMD_BMPwithCONFIG_BMPto enablesplash_displayfunction at u-boot proper and SPL.Signed-off-by Nikhil M Jain <[email protected]>Reviewed-by Devarsh Thakkar <[email protected]>Reviewed-by Simon Glass <[email protected]>---
V7:
- Add Reviewed-by tag.V6:
- Fix commit message.
- Add Reviewed-by tag.V5:
- ReplaceCONFIG_CMD_BMPwithCONFIG_BMP.V4:
- No changeV3 (patch introduced):
- Enable splash functions at SPLcommon/bmp.c | 12 ++++++------ common/splash.c | 10 +++++----- include/splash.h | 2 +- 3 files changed, 12 insertions(+), 12 deletions(-)
[...]
include/splash.h static inline int splash_display(void) · line 81
Quoted 11 lines
include/splash.h +1
-1@@ -78,4 +78,4 @@ static inline int splash_display(void)#define BMP_ALIGN_CENTER 0x7FFF -#endif +#endif
Your patch is removing the <LF> at the end of the file!
Lothar Waßmann
Signature · 9 lines
___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | [email protected] ___________________________________________________________
PATCH v7 12/14 include: Enable video related global data variable and splash at SPL
In reply to Nikhil M JainTo include video related global data variables and splash functions at SPL and u-boot proper, use CONFIG_IS_ENABLED.
Replace CONFIG_CMD_BMP with CONFIG_BMP to enable splash_display function at u-boot proper and SPL.
---
V7:
- Add Reviewed-by tag.
V6:
- Fix commit message.
- Add Reviewed-by tag.
V5:
- Replace CONFIG_CMD_BMP with CONFIG_BMP.
V4:
- No change
V3 (patch introduced):
- Enable splash functions at SPL
include/asm-generic/global_data.h | 4 ++-- include/splash.h | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-)
include/asm-generic/global_data.h +2 -2
@@ -68,7 +68,7 @@ struct global_data {* @mem_clk: memory clock rate in Hz */ unsigned long mem_clk; -#if defined(CONFIG_VIDEO ) +#if CONFIG_IS_ENABLED (VIDEO )/** * @fb_base: base address of frame buffer memory */
@@ -359,7 +359,7 @@ struct global_data {*/ struct membuff console_in;#endif -#ifdef CONFIG_VIDEO +#if CONFIG_IS_ENABLED (VIDEO )/** * @video_top: top of video frame buffer area */
include/splash.h +3 -3
@@ -49,7 +49,7 @@ struct splash_location {char *ubivol;/* UBI volume-name for ubifsmount */ }; -#ifdef CONFIG_SPLASH_SOURCE +#if CONFIG_IS_ENABLED (SPLASH_SOURCE )int splash_source_load (struct splash_location *locations,uint size);#else static inline int splash_source_load(struct splash_location *locations,
@@ -61,13 +61,13 @@ static inline int splash_source_load(struct splash_location *locations,int splash_screen_prepare (void ); -#ifdef CONFIG_SPLASH_SCREEN_ALIGN +#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y);#else static inline void splash_get_pos (int *x,int *y) { }#endif -#if defined(CONFIG_SPLASH_SCREEN ) && defined(CONFIG_CMD_BMP ) +#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP )int splash_display (void );#else static inline int splash_display (void )
Signature · 1 line
2.34.1
PATCH v7 13/14 board: ti: am62x: evm: OSPI support for splash screen
In reply to Nikhil M JainAdd ospi boot media support to load splash image from OSPI memory, add offset to read image from ospi and necessary flags defininig type of storage and storage device.
Use CONFIG_IS_ENBALED to use the splash locations at SPL and u-boot proper.
---
V7:
- Add Reviewed-by tag.
V6:
- No change.
V5:
- Replace #ifdef with #if.
- Add Reviewed-by tag.
V4:
- Added Reviewed-by tag.
V3:
- Enable splash location at SPL.
V2:
- No change.
board/ti/am62x/evm.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
board/ti/am62x/evm.c +7 -1
@@ -20,8 +20,14 @@DECLARE_GLOBAL_DATA_PTR ; -#ifdef CONFIG_SPLASH_SCREEN +#if CONFIG_IS_ENABLED(SPLASH_SCREEN) static struct splash_location default_splash_locations[] = { + { + .name = "sf", + .storage = SPLASH_STORAGE_SF, + .flags = SPLASH_STORAGE_RAW, + .offset = 0x700000, + }, { .name = "mmc", .storage = SPLASH_STORAGE_MMC,
Signature · 1 line
2.34.1
PATCH v7 14/14 common: Replace #ifdef and #if with if's
In reply to Nikhil M JainRemove #ifdef in header file to avoid multiple definitions while compilation. To improve code readability use if() rather than if's and '#ifdef's'.
---
V7(patch introduced):
- Replace #ifdef and #if with if's.
common/bmp.c | 12 +++--------- common/splash.c | 12 ++++++------ include/splash.h | 12 ------------ 3 files changed, 9 insertions(+), 27 deletions(-)
common/bmp.c +3 -9
@@ -33,7 +33,7 @@* Returns NULL if decompression failed, or if the decompressed data * didn't contain a valid BMP signature. */ -#if CONFIG_IS_ENABLED (VIDEO_BMP_GZIP ) +struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp,void **alloc_addr) {
@@ -41,6 +41,8 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,unsigned long len;struct bmp_image *bmp; +if (!CONFIG_IS_ENABLED (VIDEO_BMP_GZIP )) +return NULL ;/* * Decompress bmp image */
@@ -77,14 +79,6 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, *alloc_addr = dst;return bmp; } -#else -struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp, -void **alloc_addr) -{ -return NULL ; -} -#endif -#ifdef CONFIG_NEEDS_MANUAL_RELOC void bmp_reloc (void ) {
common/splash.c +6 -6
@@ -79,7 +79,7 @@ static int splash_video_logo_load(void) }memcpy ((void *)bmp_load_addr, bmp_logo_bitmap, -ARRAY_SIZE (bmp_logo_bitmap)); +ARRAY_SIZE (bmp_logo_bitmap));return 0 ; }
@@ -96,11 +96,12 @@ __weak int splash_screen_prepare(void)return splash_video_logo_load (); } -#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y) {char *s =env_get ("splashpos" ); +if (!CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )) +return ;if (!s)return ;
@@ -117,7 +118,6 @@ void splash_get_pos(int *x, int *y) *y =simple_strtol (s +1 ,NULL ,0 ); } } -#endif /* CONFIG_SPLASH_SCREEN_ALIGN */ #if CONFIG_IS_ENABLED (VIDEO ) && !CONFIG_IS_ENABLED (HIDE_LOGO_VERSION )
@@ -159,13 +159,14 @@ void splash_display_banner(void)* Common function to show a splash image if env("splashimage") is set. * For additional details please refer to doc/README.splashprepare. */ -#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ) +int splash_display (void ) {ulong addr;char *s;int x =0 , y =0 , ret; - +if (!(CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ))) +return -ENOSYS ; s =env_get ("splashimage" );if (!s)return -EINVAL ;
@@ -189,4 +190,3 @@ int splash_display(void) end:return ret; } -#endif
include/splash.h +0 -12
@@ -61,21 +61,9 @@ static inline int splash_source_load(struct splash_location *locations,int splash_screen_prepare (void ); -#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y); -#else -static inline void splash_get_pos (int *x,int *y) { } -#endif -#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP )int splash_display (void ); -#else -static inline int splash_display (void ) -{ -return -ENOSYS ; -} -#endif -#define BMP_ALIGN_CENTER 0x7FFF#endif
Signature · 1 line
2.34.1
Re: [PATCH V7 14/14] common: Replace #ifdef and #if with if's
Hi Nikhil,
Thanks for the patch.
Quoted 1 line · Nikhil M Jain
Remove #ifdef in header file to avoid multiple definitions while
multiple definitions doesnt seem to be right phrase as that will give compilation error anyway.
Quoted 2 lines
compilation. To improve code readability use
if()rather than if's and '#ifdef's'.
Avoid using preprocessor compilation directives and instead use simple logical expressions for better readability since compiler will anyway optimize out the respective code block if condition is not satisfied.
Quoted 16 lines
Signed-off-by Nikhil M Jain <[email protected]>---
V7(patch introduced):
- Replace #ifdef and #if with if's.common/bmp.c | 12 +++--------- common/splash.c | 12 ++++++------ include/splash.h | 12 ------------ 3 files changed, 9 insertions(+), 27 deletions(-)common/bmp.c +0
-0
common/bmp.c line 34
Quoted 2 lines
common/bmp.c +0
-0@@ -33,7 +33,7 @@* Returns NULL if decompression failed, or if the decompressed data * didn't contain a valid BMP signature.
or decompression is not enabled in Kconfig.
common/bmp.c line 36
Quoted 3 lines
common/bmp.c +1
-1*/ -#if CONFIG_IS_ENABLED (VIDEO_BMP_GZIP ) +
nitpick, blank line.
Quoted 16 lines
common/bmp.c +2
-0struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp,void **alloc_addr) {@@ -41,6 +41,8 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,unsigned long len;struct bmp_image *bmp; +if (!CONFIG_IS_ENABLED (VIDEO_BMP_GZIP )) +return NULL ;/* * Decompress bmp image */ @@ -77,14 +79,6 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, *alloc_addr = dst;return bmp; }
common/bmp.c struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, · line 83
Quoted 10 lines
common/bmp.c +0
-8-#else -struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp, -void **alloc_addr) -{ -return NULL ; -} -#endif -#ifdef CONFIG_NEEDS_MANUAL_RELOC
Don't you want to remove this too and switch to if ?
common/splash.c static int splash_video_logo_load(void) · line 82
Quoted 11 lines
common/bmp.c +0
-0void bmp_reloc (void ) {common/splash.c +1
-1@@ -79,7 +79,7 @@ static int splash_video_logo_load(void) }memcpy ((void *)bmp_load_addr, bmp_logo_bitmap, -ARRAY_SIZE (bmp_logo_bitmap)); +ARRAY_SIZE (bmp_logo_bitmap));
Is this intended? Does checkpatch work fine with that?
Quoted 6 lines
common/splash.c +0
-0return 0 ; }@@ -96,11 +96,12 @@ __weak int splash_screen_prepare(void)return splash_video_logo_load (); }
common/splash.c __weak int splash_screen_prepare(void) · line 106
Quoted 10 lines
common/splash.c +2
-1-#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y) {char *s =env_get ("splashpos" ); +if (!CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )) +return ;if (!s)return ;
You can combine above both in a single statement using ||
common/splash.c void splash_get_pos(int *x, int *y) · line 123
Quoted 9 lines
common/splash.c +0
-1@@ -117,7 +118,6 @@ void splash_get_pos(int *x, int *y) *y =simple_strtol (s +1 ,NULL ,0 ); } } -#endif /* CONFIG_SPLASH_SCREEN_ALIGN */ #if CONFIG_IS_ENABLED (VIDEO ) && !CONFIG_IS_ENABLED (HIDE_LOGO_VERSION )
Don't you intend to remove above too and switch to if for all #ifdefs ?
Quoted 4 lines
common/splash.c +0
-0@@ -159,13 +159,14 @@ void splash_display_banner(void)* Common function to show a splash image if env("splashimage") is set. * For additional details please refer to doc/README.splashprepare. */
common/splash.c void splash_display_banner(void) · line 169
Quoted 10 lines
common/splash.c +3
-2-#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ) +int splash_display (void ) {ulong addr;char *s;int x =0 , y =0 , ret; - +if (!(CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ))) +return -ENOSYS ;
I think BMP check should come under bmp specific code latter in the function.
Regards
Devarsh
Quoted 35 lines
common/splash.c +0
-1s =env_get ("splashimage" );if (!s)return -EINVAL ;@@ -189,4 +190,3 @@ int splash_display(void) end:return ret; } -#endif include/splash.h +0
-12@@ -61,21 +61,9 @@ static inline int splash_source_load(struct splash_location *locations,int splash_screen_prepare (void ); -#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y); -#else -static inline void splash_get_pos (int *x,int *y) { } -#endif -#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP )int splash_display (void ); -#else -static inline int splash_display (void ) -{ -return -ENOSYS ; -} -#endif -#define BMP_ALIGN_CENTER 0x7FFF#endif
Re: [PATCH V7 14/14] common: Replace #ifdef and #if with if's
Hi Devarsh
Quoted 65 lines · Devarsh Thakkar
Hi Nikhil,
Thanks for the patch.
Quoted 1 line · Nikhil M Jain
Remove #ifdef in header file to avoid multiple definitions while
multiple definitions doesnt seem to be right phrase as that will give compilation error anyway.
Quoted 2 lines
compilation. To improve code readability use
if()rather than if's and '#ifdef's'.Avoid using preprocessor compilation directives and instead use simple logical expressions for better readability since compiler will anyway optimize out the respective code block if condition is not satisfied.
Quoted 16 lines
Signed-off-by Nikhil M Jain <[email protected]>---
V7(patch introduced):
- Replace #ifdef and #if with if's.common/bmp.c | 12 +++--------- common/splash.c | 12 ++++++------ include/splash.h | 12 ------------ 3 files changed, 9 insertions(+), 27 deletions(-)common/bmp.c +0
-0common/bmp.c line 34
Quoted 2 lines
common/bmp.c +0
-0@@ -33,7 +33,7 @@* Returns NULL if decompression failed, or if the decompressed data * didn't contain a valid BMP signature. or decompression is not enabled in
Kconfig.common/bmp.c line 36
Quoted 3 lines
common/bmp.c +1
-1*/ -#if CONFIG_IS_ENABLED (VIDEO_BMP_GZIP ) +nitpick, blank line.
Quoted 25 lines
common/bmp.c +2
-8struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp,void **alloc_addr) {@@ -41,6 +41,8 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,unsigned long len;struct bmp_image *bmp; +if (!CONFIG_IS_ENABLED (VIDEO_BMP_GZIP )) +return NULL ;/* * Decompress bmp image */ @@ -77,14 +79,6 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, *alloc_addr = dst;return bmp; } -#else -struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp, -void **alloc_addr) -{ -return NULL ; -} -#endif -
Quoted 3 lines
common/bmp.c struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, · line 83
Quoted 1 line
common/bmp.c +0
-0#ifdef CONFIG_NEEDS_MANUAL_RELOC Don't you want to remove this too and switch to if ?
I will remove it.
Quoted 8 lines
Quoted 8 lines
common/bmp.c +0
-0void bmp_reloc (void ) {common/splash.c +0
-0@@ -79,7 +79,7 @@ static int splash_video_logo_load(void) }
Quoted 6 lines
common/splash.c static int splash_video_logo_load(void) · line 82
Quoted 3 lines
common/splash.c +1
-1memcpy ((void *)bmp_load_addr, bmp_logo_bitmap, -ARRAY_SIZE (bmp_logo_bitmap)); +ARRAY_SIZE (bmp_logo_bitmap));Is this intended? Does checkpatch work fine with that?
Quoted 1 line
I will do a recheck.
Quoted 11 lines
Quoted 11 lines
return 0; }common/splash.c +0
-1@@ -96,11 +96,12 @@ __weak int splash_screen_prepare(void)return splash_video_logo_load (); } -#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y) {char *s =env_get ("splashpos" );
Quoted 7 lines
common/splash.c __weak int splash_screen_prepare(void) · line 106
Quoted 4 lines
common/splash.c +2
-0+if (!CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )) +return ;if (!s)return ;You can combine above both in a single statement using ||
Quoted 1 line
I will combine them.
Quoted 10 lines
common/splash.c void splash_get_pos(int *x, int *y) · line 123
Quoted 8 lines
common/splash.c +0
-1@@ -117,7 +118,6 @@ void splash_get_pos(int *x, int *y) *y =simple_strtol (s +1 ,NULL ,0 ); } } -#endif /* CONFIG_SPLASH_SCREEN_ALIGN */ #if CONFIG_IS_ENABLED (VIDEO ) && !CONFIG_IS_ENABLED (HIDE_LOGO_VERSION )Don't you intend to remove above too and switch to if for all #ifdefs ?
Quoted 17 lines
Quoted 4 lines
common/splash.c +0
-0@@ -159,13 +159,14 @@ void splash_display_banner(void)* Common function to show a splash image if env("splashimage") is set. * For additional details please refer to doc/README.splashprepare. */ common/splash.c void splash_display_banner(void) · line 169
Quoted 10 lines
common/splash.c +3
-2-#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ) +int splash_display (void ) {ulong addr;char *s;int x =0 , y =0 , ret; - +if (!(CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ))) +return -ENOSYS ;I think BMP check should come under bmp specific code latter in the function.
Yes, it will be better if we just keep BMP check for bmp_display function.
Quoted 2 lines
Regards
Devarsh
Thanks,
Nikhil
Quoted 35 lines
Quoted 35 lines
common/splash.c +0
-1s =env_get ("splashimage" );if (!s)return -EINVAL ;@@ -189,4 +190,3 @@ int splash_display(void) end:return ret; } -#endif include/splash.h +0
-12@@ -61,21 +61,9 @@ static inline int splash_source_load(struct splash_location *locations,int splash_screen_prepare (void ); -#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y); -#else -static inline void splash_get_pos (int *x,int *y) { } -#endif -#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP )int splash_display (void ); -#else -static inline int splash_display (void ) -{ -return -ENOSYS ; -} -#endif -#define BMP_ALIGN_CENTER 0x7FFF#endif
Re: [PATCH V7 14/14] common: Replace #ifdef and #if with if's
In reply to Devarsh ThakkarQuoted 65 lines · Devarsh Thakkar
Hi Nikhil,
Thanks for the patch.
Quoted 1 line · Nikhil M Jain
Remove #ifdef in header file to avoid multiple definitions while
multiple definitions doesnt seem to be right phrase as that will give compilation error anyway.
Quoted 2 lines
compilation. To improve code readability use
if()rather than if's and '#ifdef's'.Avoid using preprocessor compilation directives and instead use simple logical expressions for better readability since compiler will anyway optimize out the respective code block if condition is not satisfied.
Quoted 16 lines
Signed-off-by Nikhil M Jain <[email protected]>---
V7(patch introduced):
- Replace #ifdef and #if with if's.common/bmp.c | 12 +++--------- common/splash.c | 12 ++++++------ include/splash.h | 12 ------------ 3 files changed, 9 insertions(+), 27 deletions(-)common/bmp.c +0
-0common/bmp.c line 34
Quoted 2 lines
common/bmp.c +0
-0@@ -33,7 +33,7 @@* Returns NULL if decompression failed, or if the decompressed data * didn't contain a valid BMP signature. or decompression is not enabled in
Kconfig.common/bmp.c line 36
Quoted 3 lines
common/bmp.c +1
-1*/ -#if CONFIG_IS_ENABLED (VIDEO_BMP_GZIP ) +nitpick, blank line.
Quoted 25 lines
common/bmp.c +2
-8struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp,void **alloc_addr) {@@ -41,6 +41,8 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp,unsigned long len;struct bmp_image *bmp; +if (!CONFIG_IS_ENABLED (VIDEO_BMP_GZIP )) +return NULL ;/* * Decompress bmp image */ @@ -77,14 +79,6 @@ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, *alloc_addr = dst;return bmp; } -#else -struct bmp_image *gunzip_bmp (unsigned long addr,unsigned long *lenp, -void **alloc_addr) -{ -return NULL ; -} -#endif -
Quoted 3 lines
common/bmp.c struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, · line 83
Quoted 1 line
common/bmp.c +0
-0#ifdef CONFIG_NEEDS_MANUAL_RELOC Don't you want to remove this too and switch to if ?
If this config is removed while compilation it will look for cmd/bmp which is not enabled at spl and compilation fails.
Quoted 38 lines
common/splash.c static int splash_video_logo_load(void) · line 82
Quoted 11 lines
common/bmp.c +0
-0void bmp_reloc (void ) {common/splash.c +1
-1@@ -79,7 +79,7 @@ static int splash_video_logo_load(void) }memcpy ((void *)bmp_load_addr, bmp_logo_bitmap, -ARRAY_SIZE (bmp_logo_bitmap)); +ARRAY_SIZE (bmp_logo_bitmap));Is this intended? Does checkpatch work fine with that?
Quoted 6 lines
common/splash.c +0
-0return 0 ; }@@ -96,11 +96,12 @@ __weak int splash_screen_prepare(void)return splash_video_logo_load (); }common/splash.c __weak int splash_screen_prepare(void) · line 106
Quoted 10 lines
common/splash.c +2
-1-#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y) {char *s =env_get ("splashpos" ); +if (!CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )) +return ;if (!s)return ;You can combine above both in a single statement using ||
Quoted 7 lines
common/splash.c +0
-1@@ -117,7 +118,6 @@ void splash_get_pos(int *x, int *y) *y =simple_strtol (s +1 ,NULL ,0 ); } } -#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
Quoted 4 lines
common/splash.c void splash_get_pos(int *x, int *y) · line 123
Quoted 2 lines
common/splash.c +0
-0#if CONFIG_IS_ENABLED (VIDEO ) && !CONFIG_IS_ENABLED (HIDE_LOGO_VERSION )Don't you intend to remove above too and switch to if for all #ifdefs ?
Removing these ifdefs' generates warning for implicit declaration.
Quoted 54 lines
Quoted 4 lines
common/splash.c +0
-0@@ -159,13 +159,14 @@ void splash_display_banner(void)* Common function to show a splash image if env("splashimage") is set. * For additional details please refer to doc/README.splashprepare. */ common/splash.c void splash_display_banner(void) · line 169
Quoted 10 lines
common/splash.c +3
-2-#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ) +int splash_display (void ) {ulong addr;char *s;int x =0 , y =0 , ret; - +if (!(CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP ))) +return -ENOSYS ;I think BMP check should come under bmp specific code latter in the function.
Regards
DevarshQuoted 35 lines
common/splash.c +0
-1s =env_get ("splashimage" );if (!s)return -EINVAL ;@@ -189,4 +190,3 @@ int splash_display(void) end:return ret; } -#endif include/splash.h +0
-12@@ -61,21 +61,9 @@ static inline int splash_source_load(struct splash_location *locations,int splash_screen_prepare (void ); -#if CONFIG_IS_ENABLED (SPLASH_SCREEN_ALIGN )void splash_get_pos (int *x,int *y); -#else -static inline void splash_get_pos (int *x,int *y) { } -#endif -#if CONFIG_IS_ENABLED (SPLASH_SCREEN ) &&CONFIG_IS_ENABLED (BMP )int splash_display (void ); -#else -static inline int splash_display (void ) -{ -return -ENOSYS ; -} -#endif -#define BMP_ALIGN_CENTER 0x7FFF#endif