Skip to contentSkip to conversation

Enable SPL splash screen on AM62x

PATCH Superseded Nikhil M Jain 1 participant 5 messages Apr 10, 2023

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Enable SPL splash screen on AM62x

This patch series aims at eanbling SPL splash screen on AM62x.

Changes in V2:
- Correct CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK value.

Nikhil M Jain (4):
configs: am62x_evm_a53_defconfig: Changes in memory to support SPL
splash screen
board: ti: am62x: am62x: Change splashimage and splashsource
board: ti: am62x: evm: Add necessary functions to call splash screen
common: spl: spl: Remove video driver before u-boot proper

 board/ti/am62x/am62x.env        |  4 ++--
 board/ti/am62x/evm.c            | 39 +++++++++++++++++++++++++++++++++
 common/spl/spl.c                | 15 +++++++++++++
 configs/am62x_evm_a53_defconfig | 11 ++++++----
 4 files changed, 63 insertions(+), 6 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 1/4 configs: am62x_evm_a53_defconfig: Changes in memory to support SPL splash screen

To enable splash at A53 SPL, need to do memory map changes which involves locate stack above malloc and have enough space to load bmp image above stack. To load a 1920X1200 image a minimum of 8.8MB space is needed, to support it move malloc down to 0x80b80000 from 0x80480000 and bss to 0x80c80000 to have 1MB buffer between malloc and BSS.

Observed SPL size 195KB, CONFIG_SPL_SIZE_LIMIT set to 256KB. Observed stack size 1904Bytes, CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK set to 2KB.
CONFIG_SPL_SYS_REPORT_STACK_F_USAGE config sets stack above the malloc and reports for stack overflow.

Memory map at A53 SPL before splash screen
0x80000000+---------------------+

          |    Empty 512 KB     |
          |                     |
0x80080000+---------------------+
          |     Text Base       |
          |       352 KB        |
          |                     |
0x800D8000+---------------------+
          |                     |
          |                     |
          |    Empty 3.6MB      |
          |                     |
          |                     |

0x80477660+---------------------+
| Stack 2 KB |
0x80477e60+---------------------+
| GD 416 Bytes |
0x80478000+---------------------+

          |    Malloc 352 KB    |
          |                     |
0x80480000+---------------------+
          |                     |
          |                     |
          |                     |
          |                     |
          |   Empty 5.5 MB      |
          |                     |
          |                     |
          |                     |
          |                     |
0x80a00000+---------------------+
          |                     |
          |      BSS 512 KB     |
          |                     |
0x80a80000+---------------------+
          |                     |
          |                     |
          |                     |
          |                     |
          |   Empty 5.5 MB      |
          |                     |
          |                     |
          |                     |
          |                     |

0x81000000+---------------------+FIT Image load address

New memory map with splash screen at SPL
0x80000000+---------------------+

          |    Empty 512 KB     |
          |                     |
0x80080000+---------------------+
          |     Text Base       |
          |       352 KB        |
          |                     |
0x800D8000+---------------------+
          |    Empty 1.1MB      |
          |                     |
0x80200000+---------------------+
          |                     |
          |                     |
          |                     |
          |   BMP Image Load    |
          |                     |
          |       9.4 MB        |
          |                     |
          |                     |
          |                     |
          |                     |
          |                     |
          |                     |

0x80b77660+---------------------+
| Stack 2KB |
0x80b77e60+---------------------+
| GD 416 Bytes |
0x80b78000+---------------------+

          |                     |
          |    Malloc 352KB     |
0x80b80000+---------------------+
          |                     |
          |     Empty 1 MB      |
          |                     |
0x80c80000+---------------------+
          |     BSS 512 KB      |
          |                     |
0x80d00000+---------------------+
          |                     |
          |                     |
          |    Empty 3.0 MB     |
          |                     |
          |                     |
          |                     |

0x81000000+---------------------+FIT Image load addressi

---
V2:
- Correct CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK value set it to 2KB.

 configs/am62x_evm_a53_defconfig | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
configs/am62x_evm_a53_defconfig +7 -4
index cc9c8eab3e..b9bad6ca6a 100644
@@ -8,14 +8,18 @@ CONFIG_SOC_K3_AM625=y
 CONFIG_K3_ATF_LOAD_ADDR=0x9e780000
 CONFIG_TARGET_AM625_A53_EVM=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80b80000
+CONFIG_SF_DEFAULT_SPEED=25000000
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
 CONFIG_SPL_TEXT_BASE=0x80080000
+CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_SIZE_LIMIT=0x40000
+CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -27,8 +31,9 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; setenv fdtfile ti/${name_fdt}; run distro_bootcmd"
 CONFIG_SPL_MAX_SIZE=0x58000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x80a00000
+CONFIG_SPL_BSS_START_ADDR=0x80c80000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
@@ -68,7 +73,6 @@ CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=25000000
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SOFT_RESET=y
 CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
@@ -97,4 +101,3 @@ CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.34.1
#2 lore raw

PATCH v2 2/4 board: ti: am62x: am62x: Change splashimage and splashsource

In reply to Nikhil M Jain

Change splashimage which is bmp image loadaddr to 0x80200000 since stack is situated at 0x80477660 as splash framework requires bmp image to be present above stack.

Change splashsource to sf to support loading bmp image from ospi flash memory.

---
V2:
- No change.

 board/ti/am62x/am62x.env | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
board/ti/am62x/am62x.env +2 -2
index e4e64fa637..5ac15fd240 100644
@@ -33,6 +33,6 @@ get_fit_mmc=load mmc ${bootpart} ${addr_fit}
 partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
 
 splashfile=ti.gz
-splashimage=0x82000000
+splashimage=0x80200000
 splashpos=m,m
-splashsource=mmc
+splashsource=sf
Signature · 1 line
2.34.1
#3 lore raw

PATCH v2 3/4 board: ti: am62x: evm: Add necessary functions to call splash screen

In reply to Nikhil M Jain

To enable splash screen on AM62x at a53 SPL setup DRAM, set page table, enable cache to allow copying of bmp image to frame buffer and display it using splash_display.

---
V2:
- No change.

 board/ti/am62x/evm.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
board/ti/am62x/evm.c +39 -0
index 20b2a70122..e3c80c5c67 100644
@@ -9,6 +9,7 @@
 
 #include <env.h>
 #include <spl.h>
+#include <init.h>
 #include <video.h>
 #include <splash.h>
 #include <k3-ddrss.h>
@@ -53,6 +54,44 @@ int dram_init_banksize(void)
 }
 
 #if defined(CONFIG_SPL_BUILD)
+#ifdef CONFIG_SPL_VIDEO_TIDSS
+static int setup_dram(void)
+{
+	dram_init();
+	dram_init_banksize();
+	gd->ram_base = CFG_SYS_SDRAM_BASE;
+	gd->ram_top = gd->ram_base + gd->ram_size;
+	gd->relocaddr = gd->ram_top;
+	return 0;
+}
+
+static int video_setup(void)
+{
+	ulong addr;
+	int ret;
+	addr = gd->relocaddr;
+
+	ret = video_reserve(&addr);
+	if (ret)
+		return ret;
+	debug("Reserving %luk for video at: %08lx\n",
+	      ((unsigned long)gd->relocaddr - addr) >> 10, addr);
+	gd->relocaddr = addr;
+	return 0;
+}
+
+#endif
+void spl_board_init(void)
+{
+#if defined(CONFIG_SPL_VIDEO_TIDSS)
+	setup_dram();
+	arch_reserve_mmu();
+	video_setup();
+	enable_caches();
+	splash_display();
+#endif
+}
+
 #if defined(CONFIG_K3_AM64_DDRSS)
 static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image)
 {
Signature · 1 line
2.34.1
#4 lore raw

PATCH v2 4/4 common: spl: spl: Remove video driver before u-boot proper

In reply to Nikhil M Jain

Add method to remove video driver before loading u-boot proper. When bootstage changes from SPL to u-boot proper, noo method is called to remove video driver, and at u-boot proper if video driver is not enabled, the video driver starts displaying garbage on the screen, because there is no reserved space for video and the frame buffer gets u-boot proper data written.

---
V2:
- No change.

 common/spl/spl.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
common/spl/spl.c +15 -0
index a630e79866..72078a8ebc 100644
@@ -35,6 +35,8 @@
 #include <mapmem.h>
 #include <dm/root.h>
 #include <dm/util.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
 #include <linux/compiler.h>
 #include <fdt_support.h>
 #include <bootcount.h>
@@ -889,6 +891,19 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 		debug("Failed to stash bootstage: err=%d\n", ret);
 #endif
 
+#if defined(CONFIG_SPL_VIDEO)
+	struct udevice *dev;
+	int rc;
+
+	rc = uclass_find_device(UCLASS_VIDEO, 0, &dev);
+	if (!rc && dev) {
+		rc = device_remove(dev, DM_REMOVE_NORMAL);
+		if (rc)
+			printf("Cannot remove video device '%s' (err=%d)\n",
+			       dev->name, rc);
+	}
+#endif
+
 	spl_board_prepare_for_boot();
 	jump_to_image_no_args(&spl_image);
 }
Signature · 1 line
2.34.1