HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
v2 cover HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
Hi Benjamin,
Here is a v2 of my series to allow using i2c-hid-of on non OF platforms to allow I2C-HID devices which are not enumerated by ACPI to work on ACPI platforms (by manual i2c_client instantiation using i2c_client_id matching).
Changes in v2:
- As discussed Drop the patches to consolidate all the i2c-hid-of* drivers into one
- Add a comment to the "post-reset-deassert-delay-ms" property reading, that it is a kernel internal (non public) property used between x86 platform code and the i2c-hid driver.
Regards,
Hans
Hans de Goede (3):
HID: i2c-hid-of: Consistenly use dev local variable in probe()
HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of
drivers/hid/i2c-hid/Kconfig | 6 +++-- drivers/hid/i2c-hid/i2c-hid-of.c | 38 ++++++++++++++++++++++++-------- 2 files changed, 33 insertions(+), 11 deletions(-)
Signature · 1 line
2.39.1
PATCH v2 1/3 HID: i2c-hid-of: Consistenly use dev local variable in probe()
i2c_hid_of_probe() has a dev local variable pointing to &i2c_client->dev, consistently use this everywhere in i2c_hid_of_probe().
--- drivers/hid/i2c-hid/i2c-hid-of.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-)
drivers/hid/i2c-hid/i2c-hid-of.c +5 -8
@@ -75,7 +75,7 @@ static int i2c_hid_of_probe(struct i2c_client *client)int ret;u32 val; - ihid_of =devm_kzalloc (&client->dev,sizeof (*ihid_of),GFP_KERNEL ); + ihid_of =devm_kzalloc (dev,sizeof (*ihid_of),GFP_KERNEL );if (!ihid_of)return -ENOMEM ;
@@ -84,24 +84,21 @@ static int i2c_hid_of_probe(struct i2c_client *client) ret =of_property_read_u32 (dev->of_node,"hid-descr-addr" , &val);if (ret) { -dev_err (&client->dev,"HID register address not provided\n" ); +dev_err (dev,"HID register address not provided\n" );return -ENODEV ; }if (val >>16 ) { -dev_err (&client->dev,"Bad HID register address: 0x%08x\n" , - val); +dev_err (dev,"Bad HID register address: 0x%08x\n" , val);return -EINVAL ; } hid_descriptor_address = val; -if (!device_property_read_u32 (&client->dev,"post-power-on-delay-ms" , - &val)) +if (!device_property_read_u32 (dev,"post-power-on-delay-ms" , &val)) ihid_of->post_power_delay_ms = val; ihid_of->supplies[0 ].supply ="vdd" ; ihid_of->supplies[1 ].supply ="vddl" ; - ret =devm_regulator_bulk_get (&client->dev, -ARRAY_SIZE (ihid_of->supplies), + ret =devm_regulator_bulk_get (dev,ARRAY_SIZE (ihid_of->supplies), ihid_of->supplies);if (ret)return ret;
Signature · 1 line
2.39.1
PATCH v2 2/3 HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
In reply to Hans de GoedeThere are some x86 tablets / 2-in-1s which ship with Android as their factory OS image. These have pretty broken ACPI tables, relying on everything being hardcoded in the factory kernel image.
platform/x86/x86-android-tablets.c manually instantiates i2c-clients for i2c devices on these tablets to make them work with the mainline kernel.
The Lenovo Yoga Book 1 (yb1-x90f/l) is such a 2-in-1. It has 2 I2C-HID devices its main touchscreen and a Wacom digitizer. Its main touchscreen can alternatively also be used in HiDeep's native protocol mode but for the Wacom digitizer we really need I2C-HID.
This patch allows using i2c-hid-of on non OF platforms so that it can bind to a non ACPI instantiated i2c_client on x86 for the Wacom digitizer. Note the driver already has an "i2c-over-hid" i2c_device_id (rather then an of_device_id).
Besides enabling building on non-OF platforms this also replaces the only of_property_read_u32() call with device_property_read_u32() note that other properties where already read using device_property_read_...().
--- drivers/hid/i2c-hid/Kconfig | 6 ++++-- drivers/hid/i2c-hid/i2c-hid-of.c | 4 +++- 2 files changed, 7 insertions(+), 3 deletions(-)
drivers/hid/i2c-hid/Kconfig +4 -2
@@ -23,12 +23,14 @@ config I2C_HID_ACPI config I2C_HID_OF tristate "HID over I2C transport layer Open Firmware driver" - depends on OF + # No "depends on OF" because this can also be used for manually + # (board-file) instantiated "hid-over-i2c" type i2c-clients. select I2C_HID_CORE help Say Y here if you use a keyboard, a touchpad, a touchscreen, or any other HID based devices which is connected to your computer via I2C. - This driver supports Open Firmware (Device Tree)-based systems. + This driver supports Open Firmware (Device Tree)-based systems as + well as binding to manually (board-file) instantiated i2c-hid-clients. If unsure, say N.
drivers/hid/i2c-hid/i2c-hid-of.c +3 -1
@@ -82,7 +82,7 @@ static int i2c_hid_of_probe(struct i2c_client *client) ihid_of->ops.power_up = i2c_hid_of_power_up; ihid_of->ops.power_down = i2c_hid_of_power_down; - ret =of_property_read_u32 (dev->of_node,"hid-descr-addr" , &val); + ret =device_property_read_u32 (dev,"hid-descr-addr" , &val);if (ret) {dev_err (dev,"HID register address not provided\n" );return -ENODEV ;
@@ -113,11 +113,13 @@ static int i2c_hid_of_probe(struct i2c_client *client) hid_descriptor_address, quirks); } +#ifdef CONFIG_OF static const struct of_device_id i2c_hid_of_match[] = { { .compatible ="hid-over-i2c" }, {}, };MODULE_DEVICE_TABLE (of, i2c_hid_of_match); +#endif static const struct i2c_device_id i2c_hid_of_id_table[] = { {"hid" ,0 },
Signature · 1 line
2.39.1
PATCH v2 3/3 HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of
In reply to Hans de GoedeAdd reset GPIO support to the generic i2c-hid-of driver
This is necessary to make the Wacom digitizer on the Lenovo Yoga Book 1 (yb1-x90f/l) work and this will also allow consolidating the 2 specialized i2c-hid-of-elan.c and i2c-hid-of-goodix.c drivers into the generic i2c-hid-of driver.
For now the new "post-reset-deassert-delay-ms" property is only used on x86/ACPI (non devicetree) devs. IOW it is not used in actual devicetree files and the same goes for the reset GPIO. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property + GPIO are deliberately not added to the existing devicetree-bindings.
---
Chanhes in v2:
- Add a comment to the "post-reset-deassert-delay-ms" property reading, that it is a kernel internal (non public) property used between x86 platform code and the i2c-hid driver.
--- drivers/hid/i2c-hid/i2c-hid-of.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/hid/i2c-hid/i2c-hid-of.c +21 -0
@@ -21,6 +21,7 @@#include <linux/delay.h> #include <linux/device.h> +#include <linux/gpio/consumer.h> #include <linux/hid.h> #include <linux/i2c.h> #include <linux/kernel.h>
@@ -35,8 +36,10 @@ struct i2c_hid_of {struct i2chid_ops ops;struct i2c_client *client; +struct gpio_desc *reset_gpio;struct regulator_bulk_data supplies[2 ];int post_power_delay_ms; +int post_reset_delay_ms; };static int i2c_hid_of_power_up (struct i2chid_ops *ops)
@@ -55,6 +58,10 @@ static int i2c_hid_of_power_up(struct i2chid_ops *ops)if (ihid_of->post_power_delay_ms)msleep (ihid_of->post_power_delay_ms); +gpiod_set_value_cansleep (ihid_of->reset_gpio,0 ); +if (ihid_of->post_reset_delay_ms) +msleep (ihid_of->post_reset_delay_ms); +return 0 ; }
@@ -62,6 +69,7 @@ static void i2c_hid_of_power_down(struct i2chid_ops *ops) { struct i2c_hid_of *ihid_of = container_of(ops, struct i2c_hid_of, ops); +gpiod_set_value_cansleep (ihid_of->reset_gpio,1 );regulator_bulk_disable (ARRAY_SIZE (ihid_of->supplies), ihid_of->supplies); }
@@ -96,6 +104,19 @@ static int i2c_hid_of_probe(struct i2c_client *client)if (!device_property_read_u32 (dev,"post-power-on-delay-ms" , &val)) ihid_of->post_power_delay_ms = val; +/* +* Note this is a kernel internal device-property set by x86 platform code, +* this MUST not be used in devicetree files without first adding it to +* the DT bindings. +*/ +if (!device_property_read_u32 (dev,"post-reset-deassert-delay-ms" , &val)) + ihid_of->post_reset_delay_ms = val; + +/* Start out with reset asserted */ + ihid_of->reset_gpio =devm_gpiod_get_optional (dev,"reset" ,GPIOD_OUT_HIGH ); +if (IS_ERR (ihid_of->reset_gpio)) +return PTR_ERR (ihid_of->reset_gpio); + ihid_of->supplies[0 ].supply ="vdd" ; ihid_of->supplies[1 ].supply ="vddl" ; ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ihid_of->supplies),
Signature · 1 line
2.39.1
Quoted 6 lines · Hans de Goede
Hi Benjamin,
Here is a v2 of my series to allow using i2c-hid-of on non OF platforms to allow I2C-HID devices which are not enumerated by ACPI to work on ACPI platforms (by manual
i2c_clientinstantiation usingi2c_client_idmatching).
Quoted 6 lines
Changes in v2:
- As discussed Drop the patches to consolidate all the i2c-hid-of* drivers into one
- Add a comment to the "post-reset-deassert-delay-ms" property reading, that it is a kernel internal (non public) property used between x86 platform code and the i2c-hid driver.
The series is:
I'd rather have at least Doug test this one before we merge it, but I'll be out next week, so you'll have to rely on Jiri to merge it (or wait for one week).
Cheers,
Benjamin
Quoted 18 lines
Regards,
Hans
Hans de Goede (3):
HID: i2c-hid-of: Consistenly use dev local variable inprobe()
HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
HID: i2c-hid-of: Add reset GPIO support to i2c-hid-ofdrivers/hid/i2c-hid/Kconfig | 6 +++-- drivers/hid/i2c-hid/i2c-hid-of.c | 38 ++++++++++++++++++++++++-------- 2 files changed, 33 insertions(+), 11 deletions(-)Signature · 1 line
2.39.1
Hi,
Quoted 14 lines · Benjamin Tissoires
Quoted 6 lines · Hans de Goede
Hi Benjamin,
Here is a v2 of my series to allow using i2c-hid-of on non OF platforms to allow I2C-HID devices which are not enumerated by ACPI to work on ACPI platforms (by manual
i2c_clientinstantiation usingi2c_client_idmatching).Quoted 6 lines
Changes in v2:
- As discussed Drop the patches to consolidate all the i2c-hid-of* drivers into one
- Add a comment to the "post-reset-deassert-delay-ms" property reading, that it is a kernel internal (non public) property used between x86 platform code and the i2c-hid driver.
Quoted 2 lines
The series is:
Reviewed-by Benjamin Tissoires <[email protected]>
Thank you.
Quoted 3 lines
I'd rather have at least Doug test this one before we merge it, but I'll be out next week, so you'll have to rely on Jiri to merge it (or wait for one week).
Since Doug's devices use the separate specialized drivers and this series now only touches the generic i2c-hid-of driver I don't think Doug can test this, or am I missing something ?
Regards,
Hans
Quoted 13 lines
Quoted 12 lines
Hans de Goede (3):
HID: i2c-hid-of: Consistenly use dev local variable inprobe()
HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
HID: i2c-hid-of: Add reset GPIO support to i2c-hid-ofdrivers/hid/i2c-hid/Kconfig | 6 +++-- drivers/hid/i2c-hid/i2c-hid-of.c | 38 ++++++++++++++++++++++++-------- 2 files changed, 33 insertions(+), 11 deletions(-)Signature · 1 line
2.39.1
Quoted 23 lines · Hans de Goede
Hi,
Quoted 14 lines · Benjamin Tissoires
Quoted 6 lines · Hans de Goede
Hi Benjamin,
Here is a v2 of my series to allow using i2c-hid-of on non OF platforms to allow I2C-HID devices which are not enumerated by ACPI to work on ACPI platforms (by manual
i2c_clientinstantiation usingi2c_client_idmatching).Quoted 6 lines
Changes in v2:
- As discussed Drop the patches to consolidate all the i2c-hid-of* drivers into one
- Add a comment to the "post-reset-deassert-delay-ms" property reading, that it is a kernel internal (non public) property used between x86 platform code and the i2c-hid driver.Quoted 2 lines
The series is:
Reviewed-by Benjamin Tissoires <[email protected]>Thank you.
Quoted 7 lines
Quoted 3 lines
I'd rather have at least Doug test this one before we merge it, but I'll be out next week, so you'll have to rely on Jiri to merge it (or wait for one week).
Since Doug's devices use the separate specialized drivers and this series now only touches the generic i2c-hid-of driver I don't think Doug can test this, or am I missing something ?
Ooh, sorry for the confusion. I thought we were having:
i2c-hid-of-elan -> i2c-hid-of -> i2c-hid-core
When actually, i2c-hid-of-elan is only talking to i2c-hid-core.
This is why I wanted i2c-hid-of-elan/goodix to override the property in their probe and then forward the payload to i2c-hid-of...
I guess we can take this series right away then
Cheers,
Benjamin
Quoted 23 lines
Regards,
Hans
Quoted 13 lines
Quoted 12 lines
Hans de Goede (3):
HID: i2c-hid-of: Consistenly use dev local variable inprobe()
HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms
HID: i2c-hid-of: Add reset GPIO support to i2c-hid-ofdrivers/hid/i2c-hid/Kconfig | 6 +++-- drivers/hid/i2c-hid/i2c-hid-of.c | 38 ++++++++++++++++++++++++-------- 2 files changed, 33 insertions(+), 11 deletions(-)--
2.39.1
Benjamin Tissoires
AppliedQuoted 4 lines · Hans de Goede
Here is a v2 of my series to allow using i2c-hid-of on non OF platforms to allow I2C-HID devices which are not enumerated by ACPI to work on ACPI platforms (by manual
i2c_clientinstantiation usingi2c_client_idmatching).
Quoted 8 lines
Changes in v2:
- As discussed Drop the patches to consolidate all the i2c-hid-of* drivers into one
- Add a comment to the "post-reset-deassert-delay-ms" property reading, that it is a kernel internal (non public) property used between x86 platform code and the i2c-hid driver.[...]
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git (for-6.4/i2c-hid), thanks!
[1/3] HID: i2c-hid-of: Consistenly use dev local variable in probe()
https://git.kernel.org/hid/hid/c/9d793e7c1f88 [2/3] HID: i2c-hid-of: Allow using i2c-hid-of on non OF platforms https://git.kernel.org/hid/hid/c/728ec8b6eda8 [3/3] HID: i2c-hid-of: Add reset GPIO support to i2c-hid-of https://git.kernel.org/hid/hid/c/2be404486c05
Cheers,
Signature · 1 line
Benjamin Tissoires <[email protected]>