Thermal zone device structure encapsulation
Subsystems (3)
v3 cover Thermal zone device structure encapsulation
The thermal zone device structure is defined in the exported thermal header include/linux/thermal.h
Given the definition being public, the structure is exposed to the external components other than the thermal framework core code. It results the drivers are tampering the structure internals like taking the lock or changing the field values.
Obviously that is bad for several reasons as the drivers can hook the thermal framework behavior and makes very difficult the changes in the core code as external components depend on it directly.
Moreover, the thermal trip points being reworked, we don't want the drivers to access the trips array directly in the thermal zone structure and doing assumptions on how they are organized.
This series provides a second set of changes moving to the thermal zone device structure self-encapsulation.
The ACPI and the Menlon drivers are using the thermal zone's device fields to create symlinks and new attributes in the sysfs thermal zone directory. These changes provide a hopefully temporary wrapper to access it in order to allow moving forward in the thermal zone device self-encapsulation and a Kconfig option to disable by default such a extra sysfs information.
Changelog:
v3:
- Split the Kconfig option to be driver related when disabling the specific attributes
- Use the thermal zone's device wrapper to write a trace in the pch intel driver
v2:
- Add the Kconfig option to remove specific attributes
- Add a thermal_zone_device() wrapper to access tz->device
Daniel Lezcano (6):
thermal/core: Encapsulate tz->device field thermal/drivers/intel_pch_thermal: Use thermal driver device to write
a trace
thermal/drivers/acpi: Use thermal_zone_device() thermal/drivers/menlow: Use thermal_zone_device() thermal/drivers/acpi: Make cross dev link optional by configuration thermal/drivers/intel_menlow: Make additionnal sysfs information
optional
drivers/acpi/Kconfig | 13 ++++++ drivers/acpi/thermal.c | 57 +++++++++++++++++------ drivers/thermal/intel/Kconfig | 11 +++++ drivers/thermal/intel/intel_menlow.c | 12 +++-- drivers/thermal/intel/intel_pch_thermal.c | 3 +- drivers/thermal/thermal_core.c | 6 +++ include/linux/thermal.h | 1 + 7 files changed, 84 insertions(+), 19 deletions(-)
Signature · 1 line
2.34.1
PATCH v3 1/6 thermal/core: Encapsulate tz->device field
There are still some drivers needing to play with the thermal zone device internals. That is not the best but until we can figure out if the information is really needed, let's encapsulate the field used in the thermal zone device structure, so we can move forward relocating the thermal zone device structure definition in the thermal framework private headers.
Some drivers are accessing tz->device, that implies they need to have the knowledge of the thermal_zone_device structure but we want to self-encapsulate this structure and reduce the scope of the structure to the thermal core only.
By adding this wrapper, these drivers won't need the thermal zone device structure definition and are no longer an obstacle to its relocation to the private thermal core headers.
--- drivers/thermal/thermal_core.c | 6 ++++++ include/linux/thermal.h | 1 + 2 files changed, 7 insertions(+)
drivers/thermal/thermal_core.c +6 -0
@@ -1398,6 +1398,12 @@ int thermal_zone_device_id(struct thermal_zone_device *tzd) }EXPORT_SYMBOL_GPL (thermal_zone_device_id); +struct device *thermal_zone_device (struct thermal_zone_device *tzd) +{ +return &tzd->device; +} +EXPORT_SYMBOL_GPL (thermal_zone_device); +/** * thermal_zone_device_unregister - removes the registered thermal zone device * @tz: the thermal zone device to remove
include/linux/thermal.h +1 -0
@@ -313,6 +313,7 @@ thermal_zone_device_register_with_trips(const char *, struct thermal_trip *, intvoid *thermal_zone_device_priv (struct thermal_zone_device *tzd);const char *thermal_zone_device_type (struct thermal_zone_device *tzd);int thermal_zone_device_id (struct thermal_zone_device *tzd); +struct device *thermal_zone_device (struct thermal_zone_device *tzd); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *,
Signature · 1 line
2.34.1
PATCH v3 2/6 thermal/drivers/intel_pch_thermal: Use thermal driver device to write a trace
In reply to Daniel LezcanoThe pch_critical() callback accesses the thermal zone device structure internals, it dereferences the thermal zone struct device and the 'type'.
Use the available accessors instead of accessing the structure directly.
--- drivers/thermal/intel/intel_pch_thermal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/thermal/intel/intel_pch_thermal.c +2 -1
@@ -127,7 +127,8 @@ static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)static void pch_critical (struct thermal_zone_device *tzd) { -dev_dbg (&tzd->device,"%s: critical temperature reached\n" , tzd->type); +dev_dbg (thermal_zone_device (tzd),"%s: critical temperature reached\n" , +thermal_zone_device_type (tzd)); }static struct thermal_zone_device_ops tzd_ops = {
Signature · 1 line
2.34.1
PATCH v3 3/6 thermal/drivers/acpi: Use thermal_zone_device()
In reply to Daniel LezcanoIn order to get the device associated with the thermal zone, let's use the wrapper thermal_zone_device() instead of accessing directly the content of the thermal zone device structure.
--- drivers/acpi/thermal.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/acpi/thermal.c +9 -4
@@ -789,6 +789,7 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {static int acpi_thermal_register_thermal_zone (struct acpi_thermal *tz) { +struct device *tzdev;int trips =0 ;int result;acpi_status status;
@@ -820,12 +821,14 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)if (IS_ERR (tz->thermal_zone))return -ENODEV ; + tzdev =thermal_zone_device (tz->thermal_zone); + result =sysfs_create_link (&tz->device->dev.kobj, - &tz->thermal_zone->device.kobj,"thermal_zone" ); + &tzdev->kobj,"thermal_zone" );if (result) goto unregister_tzd; - result =sysfs_create_link (&tz->thermal_zone->device.kobj, + result =sysfs_create_link (&tzdev->kobj, &tz->device->dev.kobj,"device" );if (result) goto remove_tz_link;
@@ -849,7 +852,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) acpi_bus_detach:acpi_bus_detach_private_data (tz->device->handle); remove_dev_link: -sysfs_remove_link (&tz->thermal_zone->device.kobj,"device" ); +sysfs_remove_link (&tzdev->kobj,"device" ); remove_tz_link:sysfs_remove_link (&tz->device->dev.kobj,"thermal_zone" ); unregister_tzd:
@@ -860,8 +863,10 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)static void acpi_thermal_unregister_thermal_zone (struct acpi_thermal *tz) { +struct device *tzdev =thermal_zone_device (tz->thermal_zone); +sysfs_remove_link (&tz->device->dev.kobj,"thermal_zone" ); -sysfs_remove_link (&tz->thermal_zone->device.kobj,"device" ); +sysfs_remove_link (&tzdev->kobj,"device" );thermal_zone_device_unregister (tz->thermal_zone); tz->thermal_zone =NULL ;acpi_bus_detach_private_data (tz->device->handle);
Signature · 1 line
2.34.1
PATCH v3 4/6 thermal/drivers/menlow: Use thermal_zone_device()
In reply to Daniel LezcanoIn order to get the device associated with the thermal zone, let's use the wrapper thermal_zone_device() instead of accessing directly the content of the thermal zone device structure.
--- drivers/thermal/intel/intel_menlow.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/thermal/intel/intel_menlow.c +6 -3
@@ -422,7 +422,8 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl, result =intel_menlow_add_one_attribute ("aux0" ,0644 , aux0_show, aux0_store, - &thermal->device, handle); +thermal_zone_device (thermal), + handle);if (result)return AE_ERROR ;
@@ -436,7 +437,8 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl, result =intel_menlow_add_one_attribute ("aux1" ,0644 , aux1_show, aux1_store, - &thermal->device, handle); +thermal_zone_device (thermal), + handle);if (result) {intel_menlow_unregister_sensor ();return AE_ERROR ;
@@ -449,7 +451,8 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl, result =intel_menlow_add_one_attribute ("bios_enabled" ,0444 , bios_enabled_show,NULL , - &thermal->device, handle); +thermal_zone_device (thermal), + handle);if (result) {intel_menlow_unregister_sensor ();return AE_ERROR ;
Signature · 1 line
2.34.1
PATCH v3 5/6 thermal/drivers/acpi: Make cross dev link optional by configuration
In reply to Daniel LezcanoThe ACPI thermal driver creates a link in the thermal zone device sysfs directory pointing to the device sysfs directory. At the same time, it creates a back pointer link from the device to the thermal zone device sysfs directory.
From a generic perspective, having a device pointer in the sysfs thermal zone directory may make sense. But the opposite is not true as the same driver can be related to multiple thermal zones.
The usage of these information is very specific to ACPI and it is questionable if they are really needed.
Let's make the code optional and disable it by default. If it hurts, we will revert this change.
--- drivers/acpi/Kconfig | 13 +++++++++ drivers/acpi/thermal.c | 62 ++++++++++++++++++++++++++++-------------- 2 files changed, 55 insertions(+), 20 deletions(-)
drivers/acpi/Kconfig +13 -0
@@ -336,6 +336,19 @@ config ACPI_THERMAL To compile this driver as a module, choose M here: the module will be called thermal. +config ACPI_THERMAL_SYSFS_ADDON + bool "Enable thermal sysfs addon" + depends on ACPI_THERMAL + def_bool n + help + Enable sysfs extra information added in the thermal zone and + the driver specific sysfs directories. That could be a link + to the associated thermal zone as well as a link pointing to + the device from the thermal zone. By default those are + disabled and are candidate for removal, if you need these + information anyway, enable the option or upgrade the + userspace program using them. + config ACPI_PLATFORM_PROFILE tristate
drivers/acpi/thermal.c +42 -20
94 lines not on this page · raw message
Signature · 1 line
2.34.1
Rafael J. Wysocki
maintainerRe: [PATCH v3 5/6] thermal/drivers/acpi: Make cross dev link optional by configuration
Quoted 33 lines · Daniel Lezcano
The ACPI thermal driver creates a link in the thermal zone device sysfs directory pointing to the device sysfs directory. At the same time, it creates a back pointer link from the device to the thermal zone device sysfs directory.
From a generic perspective, having a device pointer in the sysfs thermal zone directory may make sense. But the opposite is not true as the same driver can be related to multiple thermal zones.
The usage of these information is very specific to ACPI and it is questionable if they are really needed.
Let's make the code optional and disable it by default. If it hurts, we will revert this change.
Signed-off-by Daniel Lezcano <[email protected]>--- drivers/acpi/Kconfig | 13 +++++++++ drivers/acpi/thermal.c | 62 ++++++++++++++++++++++++++++-------------- 2 files changed, 55 insertions(+), 20 deletions(-)drivers/acpi/Kconfig +3
-0@@ -336,6 +336,19 @@ config ACPI_THERMAL To compile this driver as a module, choose M here: the module will be called thermal. +config ACPI_THERMAL_SYSFS_ADDON + bool "Enable thermal sysfs addon" + depends on ACPI_THERMAL
drivers/acpi/Kconfig config ACPI_THERMAL · line 351
Quoted 10 lines
drivers/acpi/Kconfig +10
-0+ def_bool n + help + Enable sysfs extra information added in the thermal zone and + the driver specific sysfs directories. That could be a link + to the associated thermal zone as well as a link pointing to + the device from the thermal zone. By default those are + disabled and are candidate for removal, if you need these + information anyway, enable the option or upgrade the + userspace program using them. +
I don't think that the Kconfig option is appropriate and the help text above isn't really helpful.
drivers/acpi/thermal.c static struct thermal_zone_device_ops acpi_thermal_zone_ops = { · line 790
Quoted 12 lines
drivers/acpi/Kconfig +0
-0config ACPI_PLATFORM_PROFILE tristatedrivers/acpi/thermal.c +1
-0@@ -787,9 +787,44 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = { .critical = acpi_thermal_zone_device_critical, }; +#ifdef CONFIG_ACPI_THERMAL_SYSFS_ADDON
I agree with moving the code in question to separate functions, but I don't agree with putting it under the Kconfig option.
Quoted 96 lines
drivers/acpi/thermal.c +41
-21+static int acpi_thermal_zone_sysfs_add (struct acpi_thermal *tz) +{ +struct device *tzdev =thermal_zone_device (tz->thermal_zone); +int ret; + + ret =sysfs_create_link (&tz->device->dev.kobj, + &tzdev->kobj,"thermal_zone" ); +if (ret) +return ret; + + ret =sysfs_create_link (&tzdev->kobj, + &tz->device->dev.kobj,"device" ); +if (ret) +sysfs_remove_link (&tz->device->dev.kobj,"thermal_zone" ); + +return ret; +} + +static void acpi_thermal_zone_sysfs_remove (struct acpi_thermal *tz) +{ +struct device *tzdev =thermal_zone_device (tz->thermal_zone); + +sysfs_remove_link (&tz->device->dev.kobj,"thermal_zone" ); +sysfs_remove_link (&tzdev->kobj,"device" ); +} +#else +static inline int acpi_thermal_zone_sysfs_add (struct acpi_thermal *tz) +{ +return 0 ; +} +static inline void acpi_thermal_zone_sysfs_remove (struct acpi_thermal *tz) +{ +} +#endif +static int acpi_thermal_register_thermal_zone (struct acpi_thermal *tz) { -struct device *tzdev;int trips =0 ;int result;acpi_status status;@@ -821,23 +856,15 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)if (IS_ERR (tz->thermal_zone))return -ENODEV ; - tzdev =thermal_zone_device (tz->thermal_zone); - - result =sysfs_create_link (&tz->device->dev.kobj, - &tzdev->kobj,"thermal_zone" ); + result =acpi_thermal_zone_sysfs_add (tz);if (result) goto unregister_tzd; - - result =sysfs_create_link (&tzdev->kobj, - &tz->device->dev.kobj,"device" ); -if (result) - goto remove_tz_link; - + status =acpi_bus_attach_private_data (tz->device->handle, tz->thermal_zone);if (ACPI_FAILURE (status)) { result = -ENODEV ; - goto remove_dev_link; + goto remove_links; } result =thermal_zone_device_enable (tz->thermal_zone);@@ -851,10 +878,8 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) acpi_bus_detach:acpi_bus_detach_private_data (tz->device->handle); -remove_dev_link: -sysfs_remove_link (&tzdev->kobj,"device" ); -remove_tz_link: -sysfs_remove_link (&tz->device->dev.kobj,"thermal_zone" ); +remove_links: +acpi_thermal_zone_sysfs_remove (tz); unregister_tzd:thermal_zone_device_unregister (tz->thermal_zone);@@ -863,10 +888,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)static void acpi_thermal_unregister_thermal_zone (struct acpi_thermal *tz) { -struct device *tzdev =thermal_zone_device (tz->thermal_zone); - -sysfs_remove_link (&tz->device->dev.kobj,"thermal_zone" ); -sysfs_remove_link (&tzdev->kobj,"device" ); +acpi_thermal_zone_sysfs_remove (tz);thermal_zone_device_unregister (tz->thermal_zone); tz->thermal_zone =NULL ;acpi_bus_detach_private_data (tz->device->handle); --2.34.1
Re: [PATCH v3 5/6] thermal/drivers/acpi: Make cross dev link optional by configuration
Quoted 32 lines · Rafael J. Wysocki
Quoted 30 lines · Daniel Lezcano
The ACPI thermal driver creates a link in the thermal zone device sysfs directory pointing to the device sysfs directory. At the same time, it creates a back pointer link from the device to the thermal zone device sysfs directory.
From a generic perspective, having a device pointer in the sysfs
thermal zone directory may make sense. But the opposite is not true as the same driver can be related to multiple thermal zones.The usage of these information is very specific to ACPI and it is questionable if they are really needed.
Let's make the code optional and disable it by default. If it hurts, we will revert this change.
Signed-off-by Daniel Lezcano <[email protected]>--- drivers/acpi/Kconfig | 13 +++++++++ drivers/acpi/thermal.c | 62 ++++++++++++++++++++++++++++-------------- 2 files changed, 55 insertions(+), 20 deletions(-)drivers/acpi/Kconfig +0
-0@@ -336,6 +336,19 @@ config ACPI_THERMAL To compile this driver as a module, choose M here: the module will be called thermal.
Quoted 16 lines
drivers/acpi/Kconfig config ACPI_THERMAL · line 351
Quoted 13 lines
drivers/acpi/Kconfig +13
-0+config ACPI_THERMAL_SYSFS_ADDON + bool "Enable thermal sysfs addon" + depends on ACPI_THERMAL + def_bool n + help + Enable sysfs extra information added in the thermal zone and + the driver specific sysfs directories. That could be a link + to the associated thermal zone as well as a link pointing to + the device from the thermal zone. By default those are + disabled and are candidate for removal, if you need these + information anyway, enable the option or upgrade the + userspace program using them. +I don't think that the
Kconfigoption is appropriate and the help text above isn't really helpful.
I'm sorry, I'm missing something. Don't we want to make these sysfs extra information optional and disable them by default ?
Quoted 11 lines
Quoted 11 lines
drivers/acpi/Kconfig +0
-0config ACPI_PLATFORM_PROFILE tristatedrivers/acpi/thermal.c +0
-0@@ -787,9 +787,44 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = { .critical = acpi_thermal_zone_device_critical, };
Quoted 4 lines
drivers/acpi/thermal.c static struct thermal_zone_device_ops acpi_thermal_zone_ops = { · line 790
Quoted 1 line
drivers/acpi/thermal.c +1
-0+#ifdef CONFIG_ACPI_THERMAL_SYSFS_ADDON I agree with moving the code in question to separate functions, but I don't agree with putting it under the
Kconfigoption.
Do you mean use IS_ENABLED check like what is done with Menlow patch 6 ?
[ ... ]
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Rafael J. Wysocki
maintainerRe: [PATCH v3 5/6] thermal/drivers/acpi: Make cross dev link optional by configuration
Quoted 51 lines · Daniel Lezcano
Quoted 32 lines · Rafael J. Wysocki
Quoted 30 lines · Daniel Lezcano
The ACPI thermal driver creates a link in the thermal zone device sysfs directory pointing to the device sysfs directory. At the same time, it creates a back pointer link from the device to the thermal zone device sysfs directory.
From a generic perspective, having a device pointer in the sysfs
thermal zone directory may make sense. But the opposite is not true as the same driver can be related to multiple thermal zones.The usage of these information is very specific to ACPI and it is questionable if they are really needed.
Let's make the code optional and disable it by default. If it hurts, we will revert this change.
Signed-off-by Daniel Lezcano <[email protected]>--- drivers/acpi/Kconfig | 13 +++++++++ drivers/acpi/thermal.c | 62 ++++++++++++++++++++++++++++-------------- 2 files changed, 55 insertions(+), 20 deletions(-)drivers/acpi/Kconfig +0
-0@@ -336,6 +336,19 @@ config ACPI_THERMAL To compile this driver as a module, choose M here: the module will be called thermal.Quoted 16 lines
drivers/acpi/Kconfig config ACPI_THERMAL · line 351
Quoted 13 lines
drivers/acpi/Kconfig +13
-0+config ACPI_THERMAL_SYSFS_ADDON + bool "Enable thermal sysfs addon" + depends on ACPI_THERMAL + def_bool n + help + Enable sysfs extra information added in the thermal zone and + the driver specific sysfs directories. That could be a link + to the associated thermal zone as well as a link pointing to + the device from the thermal zone. By default those are + disabled and are candidate for removal, if you need these + information anyway, enable the option or upgrade the + userspace program using them. +I don't think that the
Kconfigoption is appropriate and the help text above isn't really helpful.
Quoted 2 lines
I'm sorry, I'm missing something. Don't we want to make these sysfs extra information optional and disable them by default ?
No, I mean no Kconfig option at all for this one at least for now.
Re: [PATCH v3 5/6] thermal/drivers/acpi: Make cross dev link optional by configuration
On 18/04/2023 15:47, Rafael J. Wysocki wrote:
[ ... ]
Quoted 4 lines
Quoted 2 lines
I'm sorry, I'm missing something. Don't we want to make these sysfs extra information optional and disable them by default ?
No, I mean no
Kconfigoption at all for this one at least for now.
Ok, got it
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH v3 6/6 thermal/drivers/intel_menlow: Make additionnal sysfs information optional
In reply to Daniel LezcanoThe Menlon thermal driver creates specific files in the thermal zone sysfs class. It is specific to Menlon and these entries look debug code. It is probable these are not needed.
Let's make the code optional and disable it by default.
--- drivers/thermal/intel/Kconfig | 11 +++++++++++ drivers/thermal/intel/intel_menlow.c | 3 +++ 2 files changed, 14 insertions(+)
drivers/thermal/intel/Kconfig +11 -0
@@ -112,6 +112,17 @@ config INTEL_MENLOW If unsure, say N. +config INTEL_MENLOW_SYSFS_ADDON + bool "Enable thermal sysfs addon" + depends on INTEL_MENLOW + def_bool n + help + Enable sysfs extra information added in the thermal + zone. This is specific to this driver. By default those are + disabled and are candidate for removal, if you need these + information anyway, enable the option or upgrade the + userspace program using them. + config INTEL_HFI_THERMAL bool "Intel Hardware Feedback Interface" depends on NET
drivers/thermal/intel/intel_menlow.c +3 -0
@@ -374,6 +374,9 @@ static int intel_menlow_add_one_attribute(char *name, umode_t mode, void *show,struct intel_menlow_attribute *attr;int result; +if (!IS_ENABLED (CONFIG_INTEL_MENLOW_SYSFS_ADDON )) +return 0 ; + attr =kzalloc (sizeof (struct intel_menlow_attribute ),GFP_KERNEL );if (!attr)return -ENOMEM ;
Signature · 1 line
2.34.1
Rafael J. Wysocki
maintainerRe: [PATCH v3 6/6] thermal/drivers/intel_menlow: Make additionnal sysfs information optional
Quoted 18 lines · Daniel Lezcano
The Menlon thermal driver creates specific files in the thermal zone sysfs class. It is specific to Menlon and these entries look debug code. It is probable these are not needed.
Let's make the code optional and disable it by default.
Signed-off-by Daniel Lezcano <[email protected]>--- drivers/thermal/intel/Kconfig | 11 +++++++++++ drivers/thermal/intel/intel_menlow.c | 3 +++ 2 files changed, 14 insertions(+)drivers/thermal/intel/Kconfig +0
-0
drivers/thermal/intel/Kconfig config INTEL_MENLOW · line 120
Quoted 9 lines
drivers/thermal/intel/Kconfig +6
-0@@ -112,6 +112,17 @@ config INTEL_MENLOW If unsure, say N. +config INTEL_MENLOW_SYSFS_ADDON + bool "Enable thermal sysfs addon" + depends on INTEL_MENLOW + def_bool n + help + Enable sysfs extra information added in the thermal
This should be something like "Enable extra sysfs attributes in the thermal zone."
drivers/thermal/intel/Kconfig config INTEL_MENLOW · line 124
Quoted 4 lines
drivers/thermal/intel/Kconfig +4
-0+ zone. This is specific to this driver. By default those are + disabled and are candidate for removal, if you need these + information anyway, enable the option or upgrade the + userspace program using them.
The above part of the help text doesn't add much value IMV. It would be far better to say what the extra attributes are for instead.
Quoted 9 lines
drivers/thermal/intel/Kconfig +1
-0+ config INTEL_HFI_THERMAL bool "Intel Hardware Feedback Interface" depends on NETdrivers/thermal/intel/intel_menlow.c +0
-0
drivers/thermal/intel/intel_menlow.c static int intel_menlow_add_one_attribute(char *name, umode_t mode, void *show, · line 378
Quoted 5 lines
drivers/thermal/intel/intel_menlow.c +2
-0@@ -374,6 +374,9 @@ static int intel_menlow_add_one_attribute(char *name, umode_t mode, void *show,struct intel_menlow_attribute *attr;int result; +if (!IS_ENABLED (CONFIG_INTEL_MENLOW_SYSFS_ADDON )) +return 0 ;
IMV it would be cleaner to put all of the relevant code under the Kconfig option, so it is clear that it goes away when that option is not set.
I'm not sure what the compiler will do with it in the current form.
Quoted 5 lines
drivers/thermal/intel/intel_menlow.c +1
-1+ attr =kzalloc (sizeof (struct intel_menlow_attribute ),GFP_KERNEL );if (!attr)return -ENOMEM ; --
Hi Rafael,
I think I addressed your comments from V2.
Is it fine if I merge this series in the thermal/bleeding-branch ?
Quoted 55 lines · Daniel Lezcano
The thermal zone device structure is defined in the exported thermal header
include/linux/thermal.hGiven the definition being public, the structure is exposed to the external components other than the thermal framework core code. It results the drivers are tampering the structure internals like taking the lock or changing the field values.
Obviously that is bad for several reasons as the drivers can hook the thermal framework behavior and makes very difficult the changes in the core code as external components depend on it directly.
Moreover, the thermal trip points being reworked, we don't want the drivers to access the trips array directly in the thermal zone structure and doing assumptions on how they are organized.
This series provides a second set of changes moving to the thermal zone device structure self-encapsulation.
The ACPI and the Menlon drivers are using the thermal zone's device fields to create symlinks and new attributes in the sysfs thermal zone directory. These changes provide a hopefully temporary wrapper to access it in order to allow moving forward in the thermal zone device self-encapsulation and a
Kconfigoption to disable by default such a extra sysfs information.Changelog:
v3:
- Split theKconfigoption to be driver related when disabling the specific attributes
- Use the thermal zone's device wrapper to write a trace in the pch intel driver
v2:
- Add theKconfigoption to remove specific attributes
- Add athermal_zone_device()wrapper to accesstz->deviceDaniel Lezcano (6):
thermal/core: Encapsulatetz->devicefield thermal/drivers/intel_pch_thermal: Use thermal driver device to write
a trace
thermal/drivers/acpi: Usethermal_zone_device()thermal/drivers/menlow: Usethermal_zone_device()thermal/drivers/acpi: Make cross dev link optional by configuration thermal/drivers/intel_menlow: Make additionnal sysfs information
optionaldrivers/acpi/Kconfig | 13 ++++++ drivers/acpi/thermal.c | 57 +++++++++++++++++------ drivers/thermal/intel/Kconfig | 11 +++++ drivers/thermal/intel/intel_menlow.c | 12 +++-- drivers/thermal/intel/intel_pch_thermal.c | 3 +- drivers/thermal/thermal_core.c | 6 +++ include/linux/thermal.h | 1 + 7 files changed, 84 insertions(+), 19 deletions(-)
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Rafael J. Wysocki
maintainerQuoted 7 lines · Daniel Lezcano
Hi Rafael,
I think I addressed your comments from V2.
Is it fine if I merge this series in the thermal/bleeding-branch ?
This series is mostly Intel thermal material, so I'd prefer to take it via thermal-intel when ready.
Thanks!