hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT
Aleksa Savic
maintainerPATCH 1/1 hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT
Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer Aquastream XT watercooling pump, which communicates through a proprietary USB HID protocol. Implemented by Leonard Anderweit
[1] [2].
Coolant temp, fan IC and external temp sensor readings are available, along with speed and voltage of both the pump and optionally connected fan. It also exposes pump current.
Additionally, serial number and firmware version are exposed through debugfs.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49
Originally-from: Leonard Anderweit <[email protected]>
--- Documentation/hwmon/aquacomputer_d5next.rst | 5 + drivers/hwmon/aquacomputer_d5next.c | 114 +++++++++++++++++++- 2 files changed, 118 insertions(+), 1 deletion(-)
Documentation/hwmon/aquacomputer_d5next.rst +5 -0
@@ -12,6 +12,7 @@ Supported devices: * Aquacomputer Octo fan controller * Aquacomputer Quadro fan controller * Aquacomputer High Flow Next sensor +* Aquacomputer Aquastream XT watercooling pump * Aquacomputer Aquastream Ultimate watercooling pump * Aquacomputer Poweradjust 3 fan controller
@@ -56,6 +57,10 @@ The High Flow Next exposes +5V voltages, water quality, conductivity and flow re A temperature sensor can be connected to it, in which case it provides its reading and an estimation of the dissipated/absorbed power in the liquid cooling loop. +The Aquastream XT pump exposes temperature readings for the coolant, external sensor +and fan IC. It also exposes pump and fan speeds (in RPM), voltages, as well as pump +current. + The Aquastream Ultimate pump exposes coolant temp and an external temp sensor, along with speed, power, voltage and current of both the pump and optionally connected fan. It also exposes pressure and flow speed readings.
drivers/hwmon/aquacomputer_d5next.c +113 -1
191 lines not on this page · raw message
Signature · 1 line
2.39.2
Quoted 9 lines · Aleksa Savic
Extend
aquacomputer_d5nextdriver to expose various hardware sensors of the Aquacomputer Aquastream XT watercooling pump, which communicates through a proprietary USB HID protocol. Implemented by Leonard Anderweit
[1] [2].Coolant temp, fan IC and external temp sensor readings are available, along with speed and voltage of both the pump and optionally connected fan. It also exposes pump current.
Quoted 8 lines
Additionally, serial number and firmware version are exposed through debugfs.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49Originally-from: Leonard Anderweit <[email protected]>
Signed-off-by Aleksa Savic <[email protected]>
Applied.
Thanks,
Guenter