Support tunnel mode in mlx5 IPsec packet offload
Subsystems (5)
cover Support tunnel mode in mlx5 IPsec packet offload
From: Leon Romanovsky <[email protected]>
Changelog:
v1:
* Added Simon's ROB tags
* Changed some hard coded values to be defines
* Dropped custom MAC header struct in favor of struct ethhdr
* Fixed missing returned error
* Changed "void *" casting to "struct ethhdr *" casting
v0: https://lore.kernel.org/all/[email protected]
---------------------------------------------------------------------
Hi,
This series extends mlx5 to support tunnel mode in its IPsec packet offload implementation.
Thanks
---------------------------------------------------------------------
I would like to ask to apply it directly to netdev tree as PR is not really needed here.
---------------------------------------------------------------------
Leon Romanovsky (10):
net/mlx5e: Add IPsec packet offload tunnel bits net/mlx5e: Check IPsec packet offload tunnel capabilities net/mlx5e: Configure IPsec SA tables to support tunnel mode net/mlx5e: Prepare IPsec packet reformat code for tunnel mode net/mlx5e: Support IPsec RX packet offload in tunnel mode net/mlx5e: Support IPsec TX packet offload in tunnel mode net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel
mode
net/mlx5: Allow blocking encap changes in eswitch net/mlx5e: Create IPsec table with tunnel support only when encap is
disabled
net/mlx5e: Accept tunnel mode for IPsec packet offload
.../mellanox/mlx5/core/en_accel/ipsec.c | 202 ++++++++++++++- .../mellanox/mlx5/core/en_accel/ipsec.h | 11 +- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 239 +++++++++++++++--- .../mlx5/core/en_accel/ipsec_offload.c | 6 + .../net/ethernet/mellanox/mlx5/core/eswitch.h | 14 + .../mellanox/mlx5/core/eswitch_offloads.c | 48 ++++ include/linux/mlx5/mlx5_ifc.h | 8 +- 7 files changed, 481 insertions(+), 47 deletions(-)
Signature · 1 line
2.39.2
PATCH 1/10 net/mlx5e: Add IPsec packet offload tunnel bits
From: Leon Romanovsky <[email protected]>
Extend packet reformat types and flow table capabilities with IPsec packet offload tunnel bits.
--- include/linux/mlx5/mlx5_ifc.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
include/linux/mlx5/mlx5_ifc.h +6 -2
@@ -456,9 +456,11 @@ struct mlx5_ifc_flow_table_prop_layout_bits {u8 max_ft_level[0x8 ];u8 reformat_add_esp_trasport[0x1 ]; -u8 reserved_at_41[0x2 ]; +u8 reformat_l2_to_l3_esp_tunnel[0x1 ]; +u8 reserved_at_42[0x1 ];u8 reformat_del_esp_trasport[0x1 ]; -u8 reserved_at_44[0x2 ]; +u8 reformat_l3_esp_tunnel_to_l2[0x1 ]; +u8 reserved_at_45[0x1 ];u8 execute_aso[0x1 ];u8 reserved_at_47[0x19 ];
@@ -6599,7 +6601,9 @@ enum mlx5_reformat_ctx_type {MLX5_REFORMAT_TYPE_L3_TUNNEL_TO_L2 =0x3 ,MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL =0x4 ,MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV4 =0x5 , +MLX5_REFORMAT_TYPE_L2_TO_L3_ESP_TUNNEL =0x6 ,MLX5_REFORMAT_TYPE_DEL_ESP_TRANSPORT =0x8 , +MLX5_REFORMAT_TYPE_L3_ESP_TUNNEL_TO_L2 =0x9 ,MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV6 =0xb ,MLX5_REFORMAT_TYPE_INSERT_HDR =0xf , MLX5_REFORMAT_TYPE_REMOVE_HDR = 0x10,
Signature · 1 line
2.39.2
PATCH 2/10 net/mlx5e: Check IPsec packet offload tunnel capabilities
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Validate tunnel mode support for IPsec packet offload.
--- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 1 + .../ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c | 6 ++++++ 2 files changed, 7 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -0
@@ -107,6 +107,7 @@ enum mlx5_ipsec_cap {MLX5_IPSEC_CAP_PACKET_OFFLOAD =1 <<2 ,MLX5_IPSEC_CAP_ROCE =1 <<3 ,MLX5_IPSEC_CAP_PRIO =1 <<4 , + MLX5_IPSEC_CAP_TUNNEL = 1 << 5, };struct mlx5e_priv ;
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_offload.c +6 -0
@@ -48,6 +48,12 @@ u32 mlx5_ipsec_device_caps(struct mlx5_core_dev *mdev)if (MLX5_CAP_FLOWTABLE_NIC_TX (mdev, ignore_flow_level) &&MLX5_CAP_FLOWTABLE_NIC_RX (mdev, ignore_flow_level)) caps |=MLX5_IPSEC_CAP_PRIO ; + +if (MLX5_CAP_FLOWTABLE_NIC_TX (mdev, + reformat_l2_to_l3_esp_tunnel) && +MLX5_CAP_FLOWTABLE_NIC_RX (mdev, + reformat_l3_esp_tunnel_to_l2)) + caps |=MLX5_IPSEC_CAP_TUNNEL ; } if (mlx5_get_roce_state(mdev) &&
Signature · 1 line
2.39.2
PATCH 3/10 net/mlx5e: Configure IPsec SA tables to support tunnel mode
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Create SA flow steering tables both for RX and TX with tunnel reformat property. This allows to add and delete extra headers needed for tunnel mode.
--- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 23 ++++++++++++------- 1 file changed, 15 insertions(+), 8 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +15 -8
@@ -118,7 +118,7 @@ static void ipsec_chains_put_table(struct mlx5_fs_chains *chains, u32 prio)static struct mlx5_flow_table *ipsec_ft_create (struct mlx5_flow_namespace *ns,int level,int prio, -int max_num_groups) +int max_num_groups,u32 flags) {struct mlx5_flow_table_attr ft_attr = {};
@@ -127,6 +127,7 @@ static struct mlx5_flow_table *ipsec_ft_create(struct mlx5_flow_namespace *ns, ft_attr.max_fte =NUM_IPSEC_FTE ; ft_attr.level = level; ft_attr.prio = prio; + ft_attr.flags = flags;return mlx5_create_auto_grouped_flow_table (ns, &ft_attr); }
@@ -267,6 +268,7 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec,struct mlx5_flow_destination default_dest;struct mlx5_flow_destination dest[2 ];struct mlx5_flow_table *ft; +u32 flags =0 ;int err; default_dest =mlx5_ttc_get_default_dest (ttc,family2tt (family));
@@ -277,7 +279,7 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec,return err; ft =ipsec_ft_create (ns,MLX5E_ACCEL_FS_ESP_FT_ERR_LEVEL , -MLX5E_NIC_PRIO ,1 ); +MLX5E_NIC_PRIO ,1 ,0 );if (IS_ERR (ft)) { err =PTR_ERR (ft); goto err_fs_ft_status;
@@ -300,8 +302,10 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec, goto err_add;/* Create FT */ - ft =ipsec_ft_create (ns,MLX5E_ACCEL_FS_ESP_FT_LEVEL ,MLX5E_NIC_PRIO , -2 ); +if (mlx5_ipsec_device_caps (mdev) &MLX5_IPSEC_CAP_TUNNEL ) + flags =MLX5_FLOW_TABLE_TUNNEL_EN_REFORMAT ; + ft =ipsec_ft_create (ns,MLX5E_ACCEL_FS_ESP_FT_LEVEL ,MLX5E_NIC_PRIO ,2 , + flags);if (IS_ERR (ft)) { err =PTR_ERR (ft); goto err_fs_ft;
@@ -327,7 +331,7 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec, } ft =ipsec_ft_create (ns,MLX5E_ACCEL_FS_POL_FT_LEVEL ,MLX5E_NIC_PRIO , -2 ); +2 ,0 );if (IS_ERR (ft)) { err =PTR_ERR (ft); goto err_pol_ft;
@@ -511,9 +515,10 @@ static int tx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec_tx *tx, {struct mlx5_flow_destination dest = {};struct mlx5_flow_table *ft; +u32 flags =0 ;int err; - ft =ipsec_ft_create (tx->ns,2 ,0 ,1 ); + ft =ipsec_ft_create (tx->ns,2 ,0 ,1 ,0 );if (IS_ERR (ft))return PTR_ERR (ft); tx->ft.status = ft;
@@ -522,7 +527,9 @@ static int tx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec_tx *tx,if (err) goto err_status_rule; - ft =ipsec_ft_create (tx->ns,1 ,0 ,4 ); +if (mlx5_ipsec_device_caps (mdev) &MLX5_IPSEC_CAP_TUNNEL ) + flags =MLX5_FLOW_TABLE_TUNNEL_EN_REFORMAT ; + ft =ipsec_ft_create (tx->ns,1 ,0 ,4 , flags);if (IS_ERR (ft)) { err =PTR_ERR (ft); goto err_sa_ft;
@@ -541,7 +548,7 @@ static int tx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec_tx *tx, goto connect_roce; } - ft =ipsec_ft_create (tx->ns,0 ,0 ,2 ); + ft =ipsec_ft_create (tx->ns,0 ,0 ,2 ,0 );if (IS_ERR (ft)) { err =PTR_ERR (ft); goto err_pol_ft;
Signature · 1 line
2.39.2
PATCH 4/10 net/mlx5e: Prepare IPsec packet reformat code for tunnel mode
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Refactor setup_pkt_reformat() function to accommodate future extension to support tunnel mode.
--- .../mellanox/mlx5/core/en_accel/ipsec.c | 1 + .../mellanox/mlx5/core/en_accel/ipsec.h | 2 +- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 81 ++++++++++++++----- 3 files changed, 63 insertions(+), 21 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +1 -0
@@ -297,6 +297,7 @@ void mlx5e_ipsec_build_accel_xfrm_attrs(struct mlx5e_ipsec_sa_entry *sa_entry, attrs->upspec.sport =ntohs (x->sel.sport); attrs->upspec.sport_mask =ntohs (x->sel.sport_mask); attrs->upspec.proto = x->sel.proto; + attrs->mode = x->props.mode;mlx5e_ipsec_init_limits (sa_entry, attrs); }
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1
@@ -77,7 +77,7 @@ struct mlx5_replay_esn {struct mlx5_accel_esp_xfrm_attrs {u32 spi; -u32 flags; +u32 mode;struct aes_gcm_keymat aes_gcm;union {
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +61 -20
107 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [PATCH net-next v1 04/10] net/mlx5e: Prepare IPsec packet reformat code for tunnel mode
Quoted 61 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Refactor
setup_pkt_reformat()function to accommodate future extension to support tunnel mode.Signed-off-by Leon Romanovsky <[email protected]>--- .../mellanox/mlx5/core/en_accel/ipsec.c | 1 + .../mellanox/mlx5/core/en_accel/ipsec.h | 2 +- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 81 ++++++++++++++----- 3 files changed, 63 insertions(+), 21 deletions(-)drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +1
-0@@ -297,6 +297,7 @@ void mlx5e_ipsec_build_accel_xfrm_attrs(struct mlx5e_ipsec_sa_entry *sa_entry, attrs->upspec.sport =ntohs (x->sel.sport); attrs->upspec.sport_mask =ntohs (x->sel.sport_mask); attrs->upspec.proto = x->sel.proto; + attrs->mode = x->props.mode;mlx5e_ipsec_init_limits (sa_entry, attrs); }drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1
-1@@ -77,7 +77,7 @@ struct mlx5_replay_esn {struct mlx5_accel_esp_xfrm_attrs {u32 spi; -u32 flags; +u32 mode;struct aes_gcm_keymat aes_gcm;union {drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +9
-0@@ -10,6 +10,7 @@#include "lib/fs_chains.h" #define NUM_IPSEC_FTE BIT(15) +#define MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_SIZE 16struct mlx5e_ipsec_fc {struct mlx5_fc *cnt;@@ -836,40 +837,80 @@ static int setup_modify_header(struct mlx5_core_dev *mdev, u32 val, u8 dir,return 0 ; } +static int +setup_pkt_transport_reformat (struct mlx5_accel_esp_xfrm_attrs *attrs, +struct mlx5_pkt_reformat_params *reformat_params) +{ +u8 *reformatbf; +__be32 spi; + +switch (attrs->dir) {
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c static int setup_modify_header(struct mlx5_core_dev *mdev, u32 val, u8 dir, · line 857
Quoted 10 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +10
-0+case XFRM_DEV_OFFLOAD_IN : + reformat_params->type =MLX5_REFORMAT_TYPE_DEL_ESP_TRANSPORT ; +break ; +case XFRM_DEV_OFFLOAD_OUT : +if (attrs->family ==AF_INET ) + reformat_params->type = +MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV4 ; +else + reformat_params->type = +MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV6 ;
Is it guaranteed that attrs->family will be either AF_INET or AF_INET6? Later patches seem to indicate that this may not be true as they use switch statement and includes default case
Quoted 44 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +30
-6+ + reformatbf =kzalloc (MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_SIZE , +GFP_KERNEL ); +if (!reformatbf) +return -ENOMEM ; + +/* convert to network format */ + spi =htonl (attrs->spi); +memcpy (reformatbf, &spi,sizeof (spi)); + + reformat_params->param_0 = attrs->authsize; + reformat_params->size = +MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_SIZE ; + reformat_params->data = reformatbf; +break ; +default : +return -EINVAL ; + } + +return 0 ; +} +static int setup_pkt_reformat (struct mlx5_core_dev *mdev,struct mlx5_accel_esp_xfrm_attrs *attrs,struct mlx5_flow_act *flow_act) { -enum mlx5_flow_namespace_type ns_type =MLX5_FLOW_NAMESPACE_EGRESS ;struct mlx5_pkt_reformat_params reformat_params = {};struct mlx5_pkt_reformat *pkt_reformat; -u8 reformatbf[16 ] = {}; -__be32 spi; +enum mlx5_flow_namespace_type ns_type; +int ret; -if (attrs->dir ==XFRM_DEV_OFFLOAD_IN ) { - reformat_params.type =MLX5_REFORMAT_TYPE_DEL_ESP_TRANSPORT ; +switch (attrs->dir) { +case XFRM_DEV_OFFLOAD_IN : ns_type =MLX5_FLOW_NAMESPACE_KERNEL ; - goto cmd; +break ; +case XFRM_DEV_OFFLOAD_OUT : + ns_type =MLX5_FLOW_NAMESPACE_EGRESS ; +break ;
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c static int setup_modify_header(struct mlx5_core_dev *mdev, u32 val, u8 dir, · line 860
Quoted 10 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +2
-6+default : +return -EINVAL ; } -if (attrs->family ==AF_INET ) - reformat_params.type = -MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV4 ; -else - reformat_params.type = -MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV6 ;
same here
Quoted 25 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +10
-8- -/* convert to network format */ - spi =htonl (attrs->spi); -memcpy (reformatbf, &spi,4 ); +switch (attrs->mode) { +case XFRM_MODE_TRANSPORT : + ret =setup_pkt_transport_reformat (attrs, &reformat_params); +break ; +default : + ret = -EINVAL ; + } - reformat_params.param_0 = attrs->authsize; - reformat_params.size =sizeof (reformatbf); - reformat_params.data = &reformatbf; +if (ret) +return ret; -cmd: pkt_reformat =mlx5_packet_reformat_alloc (mdev, &reformat_params, ns_type); +kfree (reformat_params.data);if (IS_ERR (pkt_reformat))return PTR_ERR (pkt_reformat);
Re: [PATCH net-next v1 04/10] net/mlx5e: Prepare IPsec packet reformat code for tunnel mode
Quoted 64 lines · Sridhar
Quoted 61 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Refactor
setup_pkt_reformat()function to accommodate future extension to support tunnel mode.Signed-off-by Leon Romanovsky <[email protected]>--- .../mellanox/mlx5/core/en_accel/ipsec.c | 1 + .../mellanox/mlx5/core/en_accel/ipsec.h | 2 +- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 81 ++++++++++++++----- 3 files changed, 63 insertions(+), 21 deletions(-)drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +1
-0@@ -297,6 +297,7 @@ void mlx5e_ipsec_build_accel_xfrm_attrs(struct mlx5e_ipsec_sa_entry *sa_entry, attrs->upspec.sport =ntohs (x->sel.sport); attrs->upspec.sport_mask =ntohs (x->sel.sport_mask); attrs->upspec.proto = x->sel.proto; + attrs->mode = x->props.mode;mlx5e_ipsec_init_limits (sa_entry, attrs); }drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1
-1@@ -77,7 +77,7 @@ struct mlx5_replay_esn {struct mlx5_accel_esp_xfrm_attrs {u32 spi; -u32 flags; +u32 mode;struct aes_gcm_keymat aes_gcm;union {drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +15
-0@@ -10,6 +10,7 @@#include "lib/fs_chains.h" #define NUM_IPSEC_FTE BIT(15) +#define MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_SIZE 16struct mlx5e_ipsec_fc {struct mlx5_fc *cnt;@@ -836,40 +837,80 @@ static int setup_modify_header(struct mlx5_core_dev *mdev, u32 val, u8 dir,return 0 ; } +static int +setup_pkt_transport_reformat (struct mlx5_accel_esp_xfrm_attrs *attrs, +struct mlx5_pkt_reformat_params *reformat_params) +{ +u8 *reformatbf; +__be32 spi; + +switch (attrs->dir) { +case XFRM_DEV_OFFLOAD_IN : + reformat_params->type =MLX5_REFORMAT_TYPE_DEL_ESP_TRANSPORT ; +break ; +case XFRM_DEV_OFFLOAD_OUT : +if (attrs->family ==AF_INET ) + reformat_params->type =
Quoted 8 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c static int setup_modify_header(struct mlx5_core_dev *mdev, u32 val, u8 dir, · line 857
Quoted 4 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +4
-0+MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV4 ; + else + reformat_params->type = +MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV6 ;Is it guaranteed that
attrs->familywill be eitherAF_INETorAF_INET6? Later patches seem to indicate that this may not be true as they use switch statement and includes default case
Yes, we have relevant check in mlx5e_xfrm_validate_state():
380 if (x->props.family != AF_INET &&
381 x->props.family != AF_INET6) {
382 NL_SET_ERR_MSG_MOD(extack, "Only IPv4/6 xfrm states may be offloaded");
383 return -EINVAL;
384 }
Quoted 1 line
<...>
Quoted 8 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c static int setup_modify_header(struct mlx5_core_dev *mdev, u32 val, u8 dir, · line 860
Quoted 6 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +0
-6-if (attrs->family ==AF_INET ) - reformat_params.type = -MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV4 ; -else - reformat_params.type = -MLX5_REFORMAT_TYPE_ADD_ESP_TRANSPORT_OVER_IPV6 ;same here
See my answer above.
Thanks
Re: [PATCH net-next v1 04/10] net/mlx5e: Prepare IPsec packet reformat code for tunnel mode
In reply to Leon RomanovskyQuoted 6 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Refactor
setup_pkt_reformat()function to accommodate future extension to support tunnel mode.Signed-off-by Leon Romanovsky <[email protected]>
PATCH 5/10 net/mlx5e: Support IPsec RX packet offload in tunnel mode
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Extend mlx5 driver with logic to support IPsec RX packet offload in tunnel mode.
--- .../mellanox/mlx5/core/en_accel/ipsec.c | 36 +++++++++++++ .../mellanox/mlx5/core/en_accel/ipsec.h | 2 + .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 50 +++++++++++++++++++ 3 files changed, 88 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +36 -0
@@ -242,6 +242,41 @@ static void mlx5e_ipsec_init_limits(struct mlx5e_ipsec_sa_entry *sa_entry, attrs->lft.numb_rounds_soft = (u64 )n; } +static void mlx5e_ipsec_init_macs (struct mlx5e_ipsec_sa_entry *sa_entry, +struct mlx5_accel_esp_xfrm_attrs *attrs) +{ +struct mlx5_core_dev *mdev =mlx5e_ipsec_sa2dev (sa_entry); +struct xfrm_state *x = sa_entry->x; +struct net_device *netdev; +struct neighbour *n; +u8 addr[ETH_ALEN ]; + +if (attrs->mode !=XFRM_MODE_TUNNEL && + attrs->type !=XFRM_DEV_OFFLOAD_PACKET ) +return ; + + netdev = x->xso.real_dev; + +mlx5_query_mac_address (mdev, addr); +switch (attrs->dir) { +case XFRM_DEV_OFFLOAD_IN : +ether_addr_copy (attrs->dmac, addr); + n =neigh_lookup (&arp_tbl, &attrs->saddr.a4, netdev); +if (!n) { + n =neigh_create (&arp_tbl, &attrs->saddr.a4, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL ); + } +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (attrs->smac, addr); +break ; +default : +return ; + } +neigh_release (n); +} +void mlx5e_ipsec_build_accel_xfrm_attrs (struct mlx5e_ipsec_sa_entry *sa_entry,struct mlx5_accel_esp_xfrm_attrs *attrs) {
@@ -300,6 +335,7 @@ void mlx5e_ipsec_build_accel_xfrm_attrs(struct mlx5e_ipsec_sa_entry *sa_entry, attrs->mode = x->props.mode;mlx5e_ipsec_init_limits (sa_entry, attrs); +mlx5e_ipsec_init_macs (sa_entry, attrs); } static int mlx5e_xfrm_validate_state(struct mlx5_core_dev *mdev,
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +2 -0
@@ -99,6 +99,8 @@ struct mlx5_accel_esp_xfrm_attrs {u32 authsize;u32 reqid;struct mlx5_ipsec_lft lft; +u8 smac[ETH_ALEN ]; +u8 dmac[ETH_ALEN ]; };enum mlx5_ipsec_cap {
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +50 -0
62 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [PATCH net-next v1 05/10] net/mlx5e: Support IPsec RX packet offload in tunnel mode
Quoted 6 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Extend mlx5 driver with logic to support IPsec RX packet offload in tunnel mode.
Signed-off-by Leon Romanovsky <[email protected]>
PATCH 6/10 net/mlx5e: Support IPsec TX packet offload in tunnel mode
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Extend mlx5 driver with logic to support IPsec TX packet offload in tunnel mode.
--- .../mellanox/mlx5/core/en_accel/ipsec.c | 12 +++++ .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 52 +++++++++++++++++++ 2 files changed, 64 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +12 -0
@@ -271,6 +271,18 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,neigh_ha_snapshot (addr, n, netdev);ether_addr_copy (attrs->smac, addr);break ; +case XFRM_DEV_OFFLOAD_OUT : +ether_addr_copy (attrs->smac, addr); + n =neigh_lookup (&arp_tbl, &attrs->daddr.a4, netdev); +if (!n) { + n =neigh_create (&arp_tbl, &attrs->daddr.a4, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL ); + } +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (attrs->dmac, addr); +break ;default :return ; }
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +52 -0
76 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [PATCH net-next v1 06/10] net/mlx5e: Support IPsec TX packet offload in tunnel mode
Quoted 6 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Extend mlx5 driver with logic to support IPsec TX packet offload in tunnel mode.
Signed-off-by Leon Romanovsky <[email protected]>
Nit below not withstanding,
...
Quoted 10 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +2
-0@@ -271,6 +271,18 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,neigh_ha_snapshot (addr, n, netdev);ether_addr_copy (attrs->smac, addr);break ; +case XFRM_DEV_OFFLOAD_OUT : +ether_addr_copy (attrs->smac, addr);
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry, · line 285
Quoted 10 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +10
-0+ n =neigh_lookup (&arp_tbl, &attrs->daddr.a4, netdev); +if (!n) { + n =neigh_create (&arp_tbl, &attrs->daddr.a4, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL ); + } +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (attrs->dmac, addr); +break ;
I see no problem with the above code.
However, it does seem very similar to the code for the previous case, XFRM_DEV_OFFLOAD_IN. Perhaps this could be refactored somehow.
I'm not suggesting this warrants a respin; a follow-up would be fine IMHO. I could be wrong entirely :)
Quoted 3 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +0
-0default :return ; }
...
Re: [PATCH net-next v1 06/10] net/mlx5e: Support IPsec TX packet offload in tunnel mode
Quoted 7 lines · Simon Horman
Quoted 6 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Extend mlx5 driver with logic to support IPsec TX packet offload in tunnel mode.
Signed-off-by Leon Romanovsky <[email protected]>
<...>
Quoted 14 lines
Quoted 14 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +8
-0@@ -271,6 +271,18 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,neigh_ha_snapshot (addr, n, netdev);ether_addr_copy (attrs->smac, addr);break ; +case XFRM_DEV_OFFLOAD_OUT : +ether_addr_copy (attrs->smac, addr); + n =neigh_lookup (&arp_tbl, &attrs->daddr.a4, netdev); +if (!n) { + n =neigh_create (&arp_tbl, &attrs->daddr.a4, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL );
Quoted 8 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry, · line 285
Quoted 4 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +4
-0+ } +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (attrs->dmac, addr); +break ;I see no problem with the above code.
However, it does seem very similar to the code for the previous case,XFRM_DEV_OFFLOAD_IN. Perhaps this could be refactored somehow.
Yes, it can be refactored to something like this:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +21 -24
@@ -252,6 +252,8 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,struct net_device *netdev;struct neighbour *n;u8 addr[ETH_ALEN ]; +const void *pkey; +u8 *dst, *src;if (attrs->mode !=XFRM_MODE_TUNNEL || attrs->type !=XFRM_DEV_OFFLOAD_PACKET )
@@ -262,36 +264,31 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,mlx5_query_mac_address (mdev, addr);switch (attrs->dir) {case XFRM_DEV_OFFLOAD_IN : -ether_addr_copy (attrs->dmac, addr); - n =neigh_lookup (&arp_tbl, &attrs->saddr.a4, netdev); -if (!n) { - n =neigh_create (&arp_tbl, &attrs->saddr.a4, netdev); -if (IS_ERR (n)) -return ; -neigh_event_send (n,NULL ); - attrs->drop = true; -break ; - } -neigh_ha_snapshot (addr, n, netdev); -ether_addr_copy (attrs->smac, addr); + src = attrs->dmac; + dst = attrs->smac; + pkey = &attrs->saddr.a4;break ;case XFRM_DEV_OFFLOAD_OUT : -ether_addr_copy (attrs->smac, addr); - n =neigh_lookup (&arp_tbl, &attrs->daddr.a4, netdev); -if (!n) { - n =neigh_create (&arp_tbl, &attrs->daddr.a4, netdev); -if (IS_ERR (n)) -return ; -neigh_event_send (n,NULL ); - attrs->drop = true; -break ; - } -neigh_ha_snapshot (addr, n, netdev); -ether_addr_copy (attrs->dmac, addr); + src = attrs->smac; + dst = attrs->dmac; + pkey = &attrs->daddr.a4;break ;default :return ; } + +ether_addr_copy (src, addr); + n =neigh_lookup (&arp_tbl, pkey, netdev); +if (!n) { + n =neigh_create (&arp_tbl, pkey, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL ); + attrs->drop = true; + }else { +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (dst, addr); + }neigh_release (n); }
Thanks
Re: [PATCH net-next v1 06/10] net/mlx5e: Support IPsec TX packet offload in tunnel mode
Quoted 34 lines · Leon Romanovsky
Quoted 7 lines · Simon Horman
Quoted 6 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Extend mlx5 driver with logic to support IPsec TX packet offload in tunnel mode.
Signed-off-by Leon Romanovsky <[email protected]><...>
Quoted 14 lines
Quoted 14 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +8
-0@@ -271,6 +271,18 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,neigh_ha_snapshot (addr, n, netdev);ether_addr_copy (attrs->smac, addr);break ; +case XFRM_DEV_OFFLOAD_OUT : +ether_addr_copy (attrs->smac, addr); + n =neigh_lookup (&arp_tbl, &attrs->daddr.a4, netdev); +if (!n) { + n =neigh_create (&arp_tbl, &attrs->daddr.a4, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL );Quoted 8 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry, · line 285
Quoted 4 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +4
-0+ } +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (attrs->dmac, addr); +break ;I see no problem with the above code.
However, it does seem very similar to the code for the previous case,XFRM_DEV_OFFLOAD_IN. Perhaps this could be refactored somehow.
Quoted 1 line
Yes, it can be refactored to something like this:
Thanks Leon,
this looks good to me.
Quoted 72 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +21
-24@@ -252,6 +252,8 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,struct net_device *netdev;struct neighbour *n;u8 addr[ETH_ALEN ]; +const void *pkey; +u8 *dst, *src;if (attrs->mode !=XFRM_MODE_TUNNEL || attrs->type !=XFRM_DEV_OFFLOAD_PACKET )@@ -262,36 +264,31 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,mlx5_query_mac_address (mdev, addr);switch (attrs->dir) {case XFRM_DEV_OFFLOAD_IN : -ether_addr_copy (attrs->dmac, addr); - n =neigh_lookup (&arp_tbl, &attrs->saddr.a4, netdev); -if (!n) { - n =neigh_create (&arp_tbl, &attrs->saddr.a4, netdev); -if (IS_ERR (n)) -return ; -neigh_event_send (n,NULL ); - attrs->drop = true; -break ; - } -neigh_ha_snapshot (addr, n, netdev); -ether_addr_copy (attrs->smac, addr); + src = attrs->dmac; + dst = attrs->smac; + pkey = &attrs->saddr.a4;break ;case XFRM_DEV_OFFLOAD_OUT : -ether_addr_copy (attrs->smac, addr); - n =neigh_lookup (&arp_tbl, &attrs->daddr.a4, netdev); -if (!n) { - n =neigh_create (&arp_tbl, &attrs->daddr.a4, netdev); -if (IS_ERR (n)) -return ; -neigh_event_send (n,NULL ); - attrs->drop = true; -break ; - } -neigh_ha_snapshot (addr, n, netdev); -ether_addr_copy (attrs->dmac, addr); + src = attrs->smac; + dst = attrs->dmac; + pkey = &attrs->daddr.a4;break ;default :return ; } + +ether_addr_copy (src, addr); + n =neigh_lookup (&arp_tbl, pkey, netdev); +if (!n) { + n =neigh_create (&arp_tbl, pkey, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL ); + attrs->drop = true; + }else { +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (dst, addr); + }neigh_release (n); }Thanks
Re: [PATCH net-next v1 06/10] net/mlx5e: Support IPsec TX packet offload in tunnel mode
Quoted 35 lines · Simon Horman
Quoted 34 lines · Leon Romanovsky
Quoted 7 lines · Simon Horman
Quoted 6 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Extend mlx5 driver with logic to support IPsec TX packet offload in tunnel mode.
Signed-off-by Leon Romanovsky <[email protected]><...>
Quoted 22 lines
Quoted 8 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +2
-0@@ -271,6 +271,18 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,neigh_ha_snapshot (addr, n, netdev);ether_addr_copy (attrs->smac, addr);break ; +case XFRM_DEV_OFFLOAD_OUT : +ether_addr_copy (attrs->smac, addr);drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry, · line 285
Quoted 10 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +10
-0+ n =neigh_lookup (&arp_tbl, &attrs->daddr.a4, netdev); +if (!n) { + n =neigh_create (&arp_tbl, &attrs->daddr.a4, netdev); +if (IS_ERR (n)) +return ; +neigh_event_send (n,NULL ); + } +neigh_ha_snapshot (addr, n, netdev); +ether_addr_copy (attrs->dmac, addr); +break ;I see no problem with the above code.
However, it does seem very similar to the code for the previous case,XFRM_DEV_OFFLOAD_IN. Perhaps this could be refactored somehow.
Quoted 5 lines
Quoted 1 line
Yes, it can be refactored to something like this:
Thanks Leon,
this looks good to me.
Awesome, will prepare patch, test and send.
Thanks
PATCH 7/10 net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
In IPsec packet offload mode all header manipulations are performed by hardware, which is responsible to add/remove L2 header with source and destinations MACs.
CX-7 devices don't support offload of in-kernel routing functionality, as such HW needs external help to fill other side MAC as it isn't available for HW.
As a solution, let's listen to neigh ARP updates and reconfigure IPsec rules on the fly once new MAC data information arrives.
--- .../mellanox/mlx5/core/en_accel/ipsec.c | 132 +++++++++++++++++- .../mellanox/mlx5/core/en_accel/ipsec.h | 5 + 2 files changed, 130 insertions(+), 7 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +125 -7
@@ -35,12 +35,14 @@#include <crypto/aead.h> #include <linux/inetdevice.h> #include <linux/netdevice.h> +#include <net/netevent.h> #include "en.h" #include "ipsec.h" #include "ipsec_rxtx.h" #define MLX5_IPSEC_RESCHED msecs_to_jiffies(1000) +#define MLX5E_IPSEC_TUNNEL_SA XA_MARK_1static struct mlx5e_ipsec_sa_entry *to_ipsec_sa_entry (struct xfrm_state *x) {
@@ -251,7 +253,7 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,struct neighbour *n;u8 addr[ETH_ALEN ]; -if (attrs->mode !=XFRM_MODE_TUNNEL && +if (attrs->mode !=XFRM_MODE_TUNNEL || attrs->type !=XFRM_DEV_OFFLOAD_PACKET )return ;
@@ -267,6 +269,8 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,if (IS_ERR (n))return ;neigh_event_send (n,NULL ); + attrs->drop = true; +break ; }neigh_ha_snapshot (addr, n, netdev);ether_addr_copy (attrs->smac, addr);
@@ -279,6 +283,8 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,if (IS_ERR (n))return ;neigh_event_send (n,NULL ); + attrs->drop = true; +break ; }neigh_ha_snapshot (addr, n, netdev);ether_addr_copy (attrs->dmac, addr);
@@ -507,34 +513,81 @@ static void mlx5e_ipsec_set_esn_ops(struct mlx5e_ipsec_sa_entry *sa_entry) sa_entry->set_iv_op = mlx5e_ipsec_set_iv; } +static void mlx5e_ipsec_handle_netdev_event (struct work_struct *_work) +{ +struct mlx5e_ipsec_work *work = + container_of(_work, struct mlx5e_ipsec_work, work); +struct mlx5e_ipsec_sa_entry *sa_entry = work->sa_entry; +struct mlx5e_ipsec_netevent_data *data = work->data; +struct mlx5_accel_esp_xfrm_attrs *attrs; + + attrs = &sa_entry->attrs; + +switch (attrs->dir) { +case XFRM_DEV_OFFLOAD_IN : +ether_addr_copy (attrs->smac, data->addr); +break ; +case XFRM_DEV_OFFLOAD_OUT : +ether_addr_copy (attrs->dmac, data->addr); +break ; +default : +WARN_ON_ONCE (true); + } + attrs->drop = false; +mlx5e_accel_ipsec_fs_modify (sa_entry); +} +static int mlx5_ipsec_create_work (struct mlx5e_ipsec_sa_entry *sa_entry) {struct xfrm_state *x = sa_entry->x;struct mlx5e_ipsec_work *work; +void *data =NULL ;switch (x->xso.type) {case XFRM_DEV_OFFLOAD_CRYPTO :if (!(x->props.flags &XFRM_STATE_ESN ))return 0 ;break ; +case XFRM_DEV_OFFLOAD_PACKET : +if (x->props.mode !=XFRM_MODE_TUNNEL ) +return 0 ; +break ;default : -return 0 ; +break ; } work =kzalloc (sizeof (*work),GFP_KERNEL );if (!work)return -ENOMEM ; - work->data =kzalloc (sizeof (*sa_entry),GFP_KERNEL ); -if (!work->data) { -kfree (work); -return -ENOMEM ; +switch (x->xso.type) { +case XFRM_DEV_OFFLOAD_CRYPTO : + data =kzalloc (sizeof (*sa_entry),GFP_KERNEL ); +if (!data) + goto free_work; + +INIT_WORK (&work->work, mlx5e_ipsec_modify_state); +break ; +case XFRM_DEV_OFFLOAD_PACKET : + data =kzalloc (sizeof (struct mlx5e_ipsec_netevent_data ), +GFP_KERNEL ); +if (!data) + goto free_work; + +INIT_WORK (&work->work, mlx5e_ipsec_handle_netdev_event); +break ; +default : +break ; } -INIT_WORK (&work->work, mlx5e_ipsec_modify_state); + work->data = data; work->sa_entry = sa_entry; sa_entry->work = work;return 0 ; + +free_work: +kfree (work); +return -ENOMEM ; }static int mlx5e_ipsec_create_dwork (struct mlx5e_ipsec_sa_entry *sa_entry)
@@ -629,6 +682,12 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x,if (sa_entry->dwork)queue_delayed_work (ipsec->wq, &sa_entry->dwork->dwork,MLX5_IPSEC_RESCHED ); + +if (x->xso.type ==XFRM_DEV_OFFLOAD_PACKET && + x->props.mode ==XFRM_MODE_TUNNEL ) +xa_set_mark (&ipsec->sadb, sa_entry->ipsec_obj_id, +MLX5E_IPSEC_TUNNEL_SA ); + out: x->xso.offload_handle = (unsigned long )sa_entry;return 0 ;
@@ -651,6 +710,7 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x,static void mlx5e_xfrm_del_state (struct xfrm_state *x) {struct mlx5e_ipsec_sa_entry *sa_entry =to_ipsec_sa_entry (x); +struct mlx5_accel_esp_xfrm_attrs *attrs = &sa_entry->attrs;struct mlx5e_ipsec *ipsec = sa_entry->ipsec;struct mlx5e_ipsec_sa_entry *old;
@@ -659,6 +719,12 @@ static void mlx5e_xfrm_del_state(struct xfrm_state *x) old =xa_erase_bh (&ipsec->sadb, sa_entry->ipsec_obj_id);WARN_ON (old != sa_entry); + +if (attrs->mode ==XFRM_MODE_TUNNEL && + attrs->type ==XFRM_DEV_OFFLOAD_PACKET ) +/* Make sure that no ARP requests are running in parallel */ +flush_workqueue (ipsec->wq); + }static void mlx5e_xfrm_free_state (struct xfrm_state *x)
@@ -683,6 +749,46 @@ static void mlx5e_xfrm_free_state(struct xfrm_state *x)kfree (sa_entry); } +static int mlx5e_ipsec_netevent_event (struct notifier_block *nb, +unsigned long event,void *ptr) +{ +struct mlx5_accel_esp_xfrm_attrs *attrs; +struct mlx5e_ipsec_netevent_data *data; +struct mlx5e_ipsec_sa_entry *sa_entry; +struct mlx5e_ipsec *ipsec; +struct neighbour *n = ptr; +struct net_device *netdev; +struct xfrm_state *x; +unsigned long idx; + +if (event !=NETEVENT_NEIGH_UPDATE || !(n->nud_state &NUD_VALID )) +return NOTIFY_DONE ; + + ipsec = container_of(nb, struct mlx5e_ipsec, netevent_nb); +xa_for_each_marked (&ipsec->sadb, idx, sa_entry,MLX5E_IPSEC_TUNNEL_SA ) { + attrs = &sa_entry->attrs; + +if (attrs->family ==AF_INET ) { +if (!neigh_key_eq32 (n, &attrs->saddr.a4) && + !neigh_key_eq32 (n, &attrs->daddr.a4)) +continue ; + }else { +if (!neigh_key_eq128 (n, &attrs->saddr.a4) && + !neigh_key_eq128 (n, &attrs->daddr.a4)) +continue ; + } + + x = sa_entry->x; + netdev = x->xso.real_dev; + data = sa_entry->work->data; + +neigh_ha_snapshot (data->addr, n, netdev); +queue_work (ipsec->wq, &sa_entry->work->work); + } + +return NOTIFY_DONE ; +} +void mlx5e_ipsec_init (struct mlx5e_priv *priv) {struct mlx5e_ipsec *ipsec;
@@ -711,6 +817,13 @@ void mlx5e_ipsec_init(struct mlx5e_priv *priv) goto err_aso; } +if (mlx5_ipsec_device_caps (priv->mdev) &MLX5_IPSEC_CAP_TUNNEL ) { + ipsec->netevent_nb.notifier_call = mlx5e_ipsec_netevent_event; + ret =register_netevent_notifier (&ipsec->netevent_nb); +if (ret) + goto clear_aso; + } + ret =mlx5e_accel_ipsec_fs_init (ipsec);if (ret) goto err_fs_init;
@@ -721,6 +834,9 @@ void mlx5e_ipsec_init(struct mlx5e_priv *priv)return ; err_fs_init: +if (mlx5_ipsec_device_caps (priv->mdev) &MLX5_IPSEC_CAP_TUNNEL ) +unregister_netevent_notifier (&ipsec->netevent_nb); +clear_aso:if (mlx5_ipsec_device_caps (priv->mdev) &MLX5_IPSEC_CAP_PACKET_OFFLOAD )mlx5e_ipsec_aso_cleanup (ipsec); err_aso:
@@ -739,6 +855,8 @@ void mlx5e_ipsec_cleanup(struct mlx5e_priv *priv)return ;mlx5e_accel_ipsec_fs_cleanup (ipsec); +if (mlx5_ipsec_device_caps (priv->mdev) &MLX5_IPSEC_CAP_TUNNEL ) +unregister_netevent_notifier (&ipsec->netevent_nb);if (mlx5_ipsec_device_caps (priv->mdev) &MLX5_IPSEC_CAP_PACKET_OFFLOAD )mlx5e_ipsec_aso_cleanup (ipsec);destroy_workqueue (ipsec->wq);
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +5 -0
@@ -144,6 +144,10 @@ struct mlx5e_ipsec_work {void *data; }; +struct mlx5e_ipsec_netevent_data { +u8 addr[ETH_ALEN ]; +}; +struct mlx5e_ipsec_dwork {struct delayed_work dwork;struct mlx5e_ipsec_sa_entry *sa_entry;
@@ -169,6 +173,7 @@ struct mlx5e_ipsec {struct mlx5e_ipsec_tx *tx;struct mlx5e_ipsec_aso *aso;struct notifier_block nb; +struct notifier_block netevent_nb;struct mlx5_ipsec_fs *roce; };
Signature · 1 line
2.39.2
Re: [PATCH net-next v1 07/10] net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode
Quoted 6 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
In IPsec packet offload mode all header manipulations are performed by hardware, which is responsible to add/remove L2 header with source and destinations MACs.
Quoted 8 lines
CX-7 devices don't support offload of in-kernel routing functionality, as such HW needs external help to fill other side MAC as it isn't available for HW.
As a solution, let's listen to neigh ARP updates and reconfigure IPsec rules on the fly once new MAC data information arrives.
Signed-off-by Leon Romanovsky <[email protected]>
PATCH 8/10 net/mlx5: Allow blocking encap changes in eswitch
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Existing eswitch encap option enables header encapsulation. Unfortunately currently available hardware isn't able to perform double encapsulation, which can happen once IPsec packet offload tunnel mode is used together with encap mode set to BASIC.
So as a solution for misconfiguration, provide an option to block encap changes, which will be used for IPsec packet offload.
--- .../net/ethernet/mellanox/mlx5/core/eswitch.h | 14 ++++++ .../mellanox/mlx5/core/eswitch_offloads.c | 48 +++++++++++++++++++ 2 files changed, 62 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +14 -0
@@ -263,6 +263,7 @@ struct mlx5_esw_offload {const struct mlx5_eswitch_rep_ops *rep_ops[NUM_REP_TYPES ];u8 inline_mode;atomic64_t num_flows; +u64 num_block_encap;enum devlink_eswitch_encap_mode encap;struct ida vport_metadata_ida;unsigned int host_number;/* ECPF supports one external host */
@@ -748,6 +749,9 @@ void mlx5_eswitch_offloads_destroy_single_fdb(struct mlx5_eswitch *master_esw, struct mlx5_eswitch *slave_esw);int mlx5_eswitch_reload_reps (struct mlx5_eswitch *esw); +bool mlx5_eswitch_block_encap (struct mlx5_core_dev *dev); +void mlx5_eswitch_unblock_encap (struct mlx5_core_dev *dev); +static inline int mlx5_eswitch_num_vfs (struct mlx5_eswitch *esw) {if (mlx5_esw_allowed (esw))
@@ -761,6 +765,7 @@ mlx5_eswitch_get_slow_fdb(struct mlx5_eswitch *esw) {return esw->fdb_table.offloads.slow_fdb; } +#else /* CONFIG_MLX5_ESWITCH */ /* eswitch API stubs */ static inline int mlx5_eswitch_init (struct mlx5_core_dev *dev) {return 0 ; }
@@ -805,6 +810,15 @@ mlx5_eswitch_reload_reps(struct mlx5_eswitch *esw) {return 0 ; } + +static inline bool mlx5_eswitch_block_encap (struct mlx5_core_dev *dev) +{ +return true; +} + +static inline void mlx5_eswitch_unblock_encap (struct mlx5_core_dev *dev) +{ +}#endif /* CONFIG_MLX5_ESWITCH */ #endif /* __MLX5_ESWITCH_H__ */
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +48 -0
60 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [PATCH net-next v1 08/10] net/mlx5: Allow blocking encap changes in eswitch
Quoted 7 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Existing eswitch encap option enables header encapsulation. Unfortunately currently available hardware isn't able to perform double encapsulation, which can happen once IPsec packet offload tunnel mode is used together with encap mode set to BASIC.
Quoted 5 lines
So as a solution for misconfiguration, provide an option to block encap changes, which will be used for IPsec packet offload.
Reviewed-by Emeel Hakim <[email protected]>Signed-off-by Leon Romanovsky <[email protected]>
PATCH 9/10 net/mlx5e: Create IPsec table with tunnel support only when encap is disabled
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Current hardware doesn't support double encapsulation which is happening when IPsec packet offload tunnel mode is configured together with eswitch encap option.
Any user attempt to add new SA/policy after he/she sets encap mode, will generate the following FW syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:803:(pid 1904): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa43321), err(-22)
Make sure that we block encap changes before creating flow steering tables. This is applicable only for packet offload in tunnel mode, while packet offload in transport mode and crypto offload, don't have such limitation as they don't perform encapsulation.
--- .../mellanox/mlx5/core/en_accel/ipsec.c | 8 +++++ .../mellanox/mlx5/core/en_accel/ipsec.h | 1 + .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 33 +++++++++++++++++-- 3 files changed, 39 insertions(+), 3 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +8 -0
@@ -668,6 +668,14 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x,if (err) goto err_hw_ctx; +if (x->props.mode ==XFRM_MODE_TUNNEL && + x->xso.type ==XFRM_DEV_OFFLOAD_PACKET && + !mlx5e_ipsec_fs_tunnel_enabled (sa_entry)) { +NL_SET_ERR_MSG_MOD (extack,"Packet offload tunnel mode is disabled due to encap settings" ); + err = -EINVAL ; + goto err_add_rule; + } +/* We use *_bh() variant because xfrm_timer_handler(), which runs * in softirq context, can reach our state delete logic and we need * xa_erase_bh() there.
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -0
@@ -251,6 +251,7 @@ void mlx5e_accel_ipsec_fs_del_rule(struct mlx5e_ipsec_sa_entry *sa_entry);int mlx5e_accel_ipsec_fs_add_pol (struct mlx5e_ipsec_pol_entry *pol_entry);void mlx5e_accel_ipsec_fs_del_pol (struct mlx5e_ipsec_pol_entry *pol_entry);void mlx5e_accel_ipsec_fs_modify (struct mlx5e_ipsec_sa_entry *sa_entry); +bool mlx5e_ipsec_fs_tunnel_enabled (struct mlx5e_ipsec_sa_entry *sa_entry);int mlx5_ipsec_create_sa_ctx (struct mlx5e_ipsec_sa_entry *sa_entry);void mlx5_ipsec_free_sa_ctx (struct mlx5e_ipsec_sa_entry *sa_entry);
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +30 -3
@@ -4,6 +4,7 @@#include <linux/netdevice.h> #include "en.h" #include "en/fs.h" +#include "eswitch.h" #include "ipsec.h" #include "fs_core.h" #include "lib/ipsec_fs_roce.h"
@@ -38,6 +39,7 @@ struct mlx5e_ipsec_rx {struct mlx5e_ipsec_rule status;struct mlx5e_ipsec_fc *fc;struct mlx5_fs_chains *chains; + u8 allow_tunnel_mode : 1; };struct mlx5e_ipsec_tx {
@@ -47,6 +49,7 @@ struct mlx5e_ipsec_tx {struct mlx5_flow_namespace *ns;struct mlx5e_ipsec_fc *fc;struct mlx5_fs_chains *chains; + u8 allow_tunnel_mode : 1; };/* IPsec RX flow steering */
@@ -254,7 +257,8 @@ static void rx_destroy(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec,mlx5_del_flow_rules (rx->sa.rule);mlx5_destroy_flow_group (rx->sa.group);mlx5_destroy_flow_table (rx->ft.sa); - +if (rx->allow_tunnel_mode) +mlx5_eswitch_unblock_encap (mdev);mlx5_del_flow_rules (rx->status.rule);mlx5_modify_header_dealloc (mdev, rx->status.modify_hdr);mlx5_destroy_flow_table (rx->ft.status);
@@ -305,6 +309,8 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec,/* Create FT */ if (mlx5_ipsec_device_caps (mdev) &MLX5_IPSEC_CAP_TUNNEL ) + rx->allow_tunnel_mode =mlx5_eswitch_block_encap (mdev); +if (rx->allow_tunnel_mode) flags =MLX5_FLOW_TABLE_TUNNEL_EN_REFORMAT ; ft =ipsec_ft_create (ns,MLX5E_ACCEL_FS_ESP_FT_LEVEL ,MLX5E_NIC_PRIO ,2 , flags);
@@ -362,6 +368,8 @@ static int rx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec *ipsec, err_fs:mlx5_destroy_flow_table (rx->ft.sa); err_fs_ft: +if (rx->allow_tunnel_mode) +mlx5_eswitch_unblock_encap (mdev);mlx5_del_flow_rules (rx->status.rule);mlx5_modify_header_dealloc (mdev, rx->status.modify_hdr); err_add:
@@ -496,7 +504,8 @@ static int ipsec_counter_rule_tx(struct mlx5_core_dev *mdev, struct mlx5e_ipsec_ }/* IPsec TX flow steering */ -static void tx_destroy (struct mlx5e_ipsec_tx *tx,struct mlx5_ipsec_fs *roce) +static void tx_destroy (struct mlx5_core_dev *mdev,struct mlx5e_ipsec_tx *tx, +struct mlx5_ipsec_fs *roce) {mlx5_ipsec_fs_roce_tx_destroy (roce);if (tx->chains) {
@@ -508,6 +517,8 @@ static void tx_destroy(struct mlx5e_ipsec_tx *tx, struct mlx5_ipsec_fs *roce) }mlx5_destroy_flow_table (tx->ft.sa); +if (tx->allow_tunnel_mode) +mlx5_eswitch_unblock_encap (mdev);mlx5_del_flow_rules (tx->status.rule);mlx5_destroy_flow_table (tx->ft.status); }
@@ -530,6 +541,8 @@ static int tx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec_tx *tx, goto err_status_rule;if (mlx5_ipsec_device_caps (mdev) &MLX5_IPSEC_CAP_TUNNEL ) + tx->allow_tunnel_mode =mlx5_eswitch_block_encap (mdev); +if (tx->allow_tunnel_mode) flags =MLX5_FLOW_TABLE_TUNNEL_EN_REFORMAT ; ft =ipsec_ft_create (tx->ns,1 ,0 ,4 , flags);if (IS_ERR (ft)) {
@@ -581,6 +594,8 @@ static int tx_create(struct mlx5_core_dev *mdev, struct mlx5e_ipsec_tx *tx, err_pol_ft:mlx5_destroy_flow_table (tx->ft.sa); err_sa_ft: +if (tx->allow_tunnel_mode) +mlx5_eswitch_unblock_encap (mdev);mlx5_del_flow_rules (tx->status.rule); err_status_rule:mlx5_destroy_flow_table (tx->ft.status);
@@ -609,7 +624,7 @@ static void tx_put(struct mlx5e_ipsec *ipsec, struct mlx5e_ipsec_tx *tx)if (--tx->ft.refcnt)return ; -tx_destroy (tx, ipsec->roce); +tx_destroy (ipsec->mdev, tx, ipsec->roce); } static struct mlx5_flow_table *tx_ft_get_policy(struct mlx5_core_dev *mdev,
@@ -1603,3 +1618,15 @@ void mlx5e_accel_ipsec_fs_modify(struct mlx5e_ipsec_sa_entry *sa_entry)mlx5e_accel_ipsec_fs_del_rule (sa_entry);memcpy (sa_entry, &sa_entry_shadow,sizeof (*sa_entry)); } + +bool mlx5e_ipsec_fs_tunnel_enabled (struct mlx5e_ipsec_sa_entry *sa_entry) +{ +struct mlx5e_ipsec_rx *rx = +ipsec_rx (sa_entry->ipsec, sa_entry->attrs.family); +struct mlx5e_ipsec_tx *tx = sa_entry->ipsec->tx; + +if (sa_entry->attrs.dir ==XFRM_DEV_OFFLOAD_OUT ) +return tx->allow_tunnel_mode; + +return rx->allow_tunnel_mode; +}
Signature · 1 line
2.39.2
Re: [PATCH net-next v1 09/10] net/mlx5e: Create IPsec table with tunnel support only when encap is disabled
Quoted 12 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Current hardware doesn't support double encapsulation which is happening when IPsec packet offload tunnel mode is configured together with eswitch encap option.
Any user attempt to add new SA/policy after he/she sets encap mode, will generate the following FW syndrome:
mlx5_core0000:08:00.0: mlx5_cmd_out_err:803:(pid 1904):CREATE_FLOW_TABLE(0x930)op_mod(0x0)failed, status bad parameter(0x3), syndrome (0xa43321), err(-22)
Quoted 7 lines
Make sure that we block encap changes before creating flow steering tables. This is applicable only for packet offload in tunnel mode, while packet offload in transport mode and crypto offload, don't have such limitation as they don't perform encapsulation.
Reviewed-by Raed Salem <[email protected]>Signed-off-by Leon Romanovsky <[email protected]>
PATCH 10/10 net/mlx5e: Accept tunnel mode for IPsec packet offload
In reply to Leon RomanovskyFrom: Leon Romanovsky <[email protected]>
Open mlx5 driver to accept IPsec tunnel mode.
--- .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +8 -7
@@ -422,6 +422,11 @@ static int mlx5e_xfrm_validate_state(struct mlx5_core_dev *mdev,return -EINVAL ; } +if (x->props.mode !=XFRM_MODE_TRANSPORT && x->props.mode !=XFRM_MODE_TUNNEL ) { +NL_SET_ERR_MSG_MOD (extack,"Only transport and tunnel xfrm states may be offloaded" ); +return -EINVAL ; + } +switch (x->xso.type) {case XFRM_DEV_OFFLOAD_CRYPTO :if (!(mlx5_ipsec_device_caps (mdev) &MLX5_IPSEC_CAP_CRYPTO )) {
@@ -429,11 +434,6 @@ static int mlx5e_xfrm_validate_state(struct mlx5_core_dev *mdev,return -EINVAL ; } -if (x->props.mode !=XFRM_MODE_TRANSPORT && - x->props.mode !=XFRM_MODE_TUNNEL ) { -NL_SET_ERR_MSG_MOD (extack,"Only transport and tunnel xfrm states may be offloaded" ); -return -EINVAL ; - }break ;case XFRM_DEV_OFFLOAD_PACKET : if (!(mlx5_ipsec_device_caps(mdev) &
@@ -442,8 +442,9 @@ static int mlx5e_xfrm_validate_state(struct mlx5_core_dev *mdev,return -EINVAL ; } -if (x->props.mode !=XFRM_MODE_TRANSPORT ) { -NL_SET_ERR_MSG_MOD (extack,"Only transport xfrm states may be offloaded in packet mode" ); +if (x->props.mode ==XFRM_MODE_TUNNEL && + !(mlx5_ipsec_device_caps (mdev) &MLX5_IPSEC_CAP_TUNNEL )) { +NL_SET_ERR_MSG_MOD (extack,"Packet offload is not supported for tunnel mode" );return -EINVAL ; }
Signature · 1 line
2.39.2
Re: [PATCH net-next v1 10/10] net/mlx5e: Accept tunnel mode for IPsec packet offload
Quoted 5 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Open mlx5 driver to accept IPsec tunnel mode.
Signed-off-by Leon Romanovsky <[email protected]>
Quoted 11 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Changelog:
v1:
* Added Simon's ROB tags
* Changed some hard coded values to be defines
* Dropped custom MAC header struct in favor of struct ethhdr
* Fixed missing returned error
* Changed "void *" casting to "struct ethhdr *" casting
v0: https://lore.kernel.org/all/[email protected]
Quoted 7 lines
---------------------------------------------------------------------
Hi,This series extends mlx5 to support tunnel mode in its IPsec packet offload implementation.
Thanks
For the series
Quoted 29 lines
---------------------------------------------------------------------
I would like to ask to apply it directly to netdev tree as PR is not really needed here.
---------------------------------------------------------------------Leon Romanovsky (10):
net/mlx5e: Add IPsec packet offload tunnel bits net/mlx5e: Check IPsec packet offload tunnel capabilities net/mlx5e: Configure IPsec SA tables to support tunnel mode net/mlx5e: Prepare IPsec packet reformat code for tunnel mode net/mlx5e: Support IPsec RX packet offload in tunnel mode net/mlx5e: Support IPsec TX packet offload in tunnel mode net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel
mode
net/mlx5: Allow blocking encap changes in eswitch net/mlx5e: Create IPsec table with tunnel support only when encap is
disabled
net/mlx5e: Accept tunnel mode for IPsec packet offload.../mellanox/mlx5/core/en_accel/ipsec.c | 202 ++++++++++++++- .../mellanox/mlx5/core/en_accel/ipsec.h | 11 +- .../mellanox/mlx5/core/en_accel/ipsec_fs.c | 239 +++++++++++++++--- .../mlx5/core/en_accel/ipsec_offload.c | 6 + .../net/ethernet/mellanox/mlx5/core/eswitch.h | 14 + .../mellanox/mlx5/core/eswitch_offloads.c | 48 ++++ include/linux/mlx5/mlx5_ifc.h | 8 +- 7 files changed, 481 insertions(+), 47 deletions(-)
Jakub Kicinski
maintainerQuoted 9 lines · On Thu, 13 Apr 2023 15:29:18 +0300 Leon Romanovsky wrote:
Changelog:
v1:
* Added Simon's ROB tags
* Changed some hard coded values to be defines
* Dropped custom MAC header struct in favor of struct ethhdr
* Fixed missing returned error
* Changed "void *" casting to "struct ethhdr *" casting
v0: https://lore.kernel.org/all/[email protected]
Quoted 5 lines
---------------------------------------------------------------------
Hi,This series extends mlx5 to support tunnel mode in its IPsec packet offload implementation.
Hi Simon,
would you be able to take a look in the new few days? I think you have the rare combination of TC and ipsec expertise :)
Quoted 13 lines · Jakub Kicinski
Quoted 12 lines · On Thu, 13 Apr 2023 15:29:18 +0300 Leon Romanovsky wrote:
Changelog:
v1:
* Added Simon's ROB tags
* Changed some hard coded values to be defines
* Dropped custom MAC header struct in favor of struct ethhdr
* Fixed missing returned error
* Changed "void *" casting to "struct ethhdr *" casting
v0: https://lore.kernel.org/all/[email protected]---------------------------------------------------------------------
Hi,
Quoted 8 lines
Quoted 2 lines
This series extends mlx5 to support tunnel mode in its IPsec packet offload implementation.
Hi Simon,
would you be able to take a look in the new few days? I think you have the rare combination of TC and ipsec expertise :)
Hi Jakub,
certainly, will do.
Quoted 19 lines · Simon Horman
Quoted 18 lines · Jakub Kicinski
Quoted 9 lines · On Thu, 13 Apr 2023 15:29:18 +0300 Leon Romanovsky wrote:
Changelog:
v1:
* Added Simon's ROB tags
* Changed some hard coded values to be defines
* Dropped custom MAC header struct in favor of struct ethhdr
* Fixed missing returned error
* Changed "void *" casting to "struct ethhdr *" casting
v0: https://lore.kernel.org/all/[email protected]Quoted 5 lines
---------------------------------------------------------------------
Hi,This series extends mlx5 to support tunnel mode in its IPsec packet offload implementation.
Hi Simon,
Quoted 7 lines
Quoted 3 lines
would you be able to take a look in the new few days? I think you have the rare combination of TC and ipsec expertise :)
Hi Jakub,
certainly, will do.
Hi Jakub,
sorry for the delay in getting to this patch - I was on a short break. I had already looked over v0 prior to my break.
And, after reviewing v1, I am happy with this series.
Quoted 26 lines · Simon Horman
Quoted 25 lines · Simon Horman
Quoted 13 lines · Jakub Kicinski
Quoted 12 lines · On Thu, 13 Apr 2023 15:29:18 +0300 Leon Romanovsky wrote:
Changelog:
v1:
* Added Simon's ROB tags
* Changed some hard coded values to be defines
* Dropped custom MAC header struct in favor of struct ethhdr
* Fixed missing returned error
* Changed "void *" casting to "struct ethhdr *" casting
v0: https://lore.kernel.org/all/[email protected]---------------------------------------------------------------------
Hi,Quoted 8 lines
Quoted 2 lines
This series extends mlx5 to support tunnel mode in its IPsec packet offload implementation.
Hi Simon,
would you be able to take a look in the new few days? I think you have the rare combination of TC and ipsec expertise :)
Hi Jakub,
Quoted 7 lines
Quoted 1 line
certainly, will do.
Hi Jakub,
sorry for the delay in getting to this patch - I was on a short break. I had already looked over v0 prior to my break.
And, after reviewing v1, I am happy with this series.
Thanks a lot.
Jakub Kicinski
maintainerQuoted 3 lines · On Mon, 17 Apr 2023 15:38:21 +0200 Simon Horman wrote:
sorry for the delay in getting to this patch - I was on a short break. I had already looked over v0 prior to my break.
And, after reviewing v1, I am happy with this series.
Thank you!
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 11 lines · On Thu, 13 Apr 2023 15:29:18 +0300 you wrote:
From: Leon Romanovsky <[email protected]>
Changelog:
v1:
* Added Simon's ROB tags
* Changed some hard coded values to be defines
* Dropped custom MAC header struct in favor of struct ethhdr
* Fixed missing returned error
* Changed "void *" casting to "struct ethhdr *" casting
v0: https://lore.kernel.org/all/[email protected]
Quoted 1 line
[...]
Here is the summary with links:
- [net-next,v1,01/10] net/mlx5e: Add IPsec packet offload tunnel bits
https://git.kernel.org/netdev/net-next/c/1210af3b9956 - [net-next,v1,02/10] net/mlx5e: Check IPsec packet offload tunnel capabilities https://git.kernel.org/netdev/net-next/c/1c80e949292f - [net-next,v1,03/10] net/mlx5e: Configure IPsec SA tables to support tunnel mode https://git.kernel.org/netdev/net-next/c/006adbc6de9f - [net-next,v1,04/10] net/mlx5e: Prepare IPsec packet reformat code for tunnel mode https://git.kernel.org/netdev/net-next/c/6480a3b6c90a - [net-next,v1,05/10] net/mlx5e: Support IPsec RX packet offload in tunnel mode https://git.kernel.org/netdev/net-next/c/37a417ca911a - [net-next,v1,06/10] net/mlx5e: Support IPsec TX packet offload in tunnel mode https://git.kernel.org/netdev/net-next/c/efbd31c4d844 - [net-next,v1,07/10] net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode https://git.kernel.org/netdev/net-next/c/4c24272b4e2b - [net-next,v1,08/10] net/mlx5: Allow blocking encap changes in eswitch https://git.kernel.org/netdev/net-next/c/acc109291a02 - [net-next,v1,09/10] net/mlx5e: Create IPsec table with tunnel support only when encap is disabled https://git.kernel.org/netdev/net-next/c/146c196b60e4 - [net-next,v1,10/10] net/mlx5e: Accept tunnel mode for IPsec packet offload https://git.kernel.org/netdev/net-next/c/c941da23aaf0
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html