lpfc: Update lpfc to revision 14.2.0.12
Subsystems (3)
cover lpfc: Update lpfc to revision 14.2.0.12
Update lpfc to revision 14.2.0.12
This patch set contains fixes flagged by code analyzer tools, introduces a new CQE status to handle DMA errors, and replaces the usage of blk interrupts with threaded interrupts.
The patches were cut against Martin's 6.4/scsi-queue tree.
Justin Tee (7):
lpfc: Fix verbose logging for scsi commands issued to SES devices
lpfc: Fix double free in lpfc_cmpl_els_logo_acc caused by
lpfc_nlp_not_used
lpfc: Match lock ordering of lpfc_cmd->buf_lock and hbalock for abort
paths
lpfc: Update congestion warning notification period
lpfc: Add new RCQE status for handling DMA failures
lpfc: Replace blk_irq_poll intr handler with threaded irq
lpfc: Update lpfc version to 14.2.0.12
drivers/scsi/lpfc/lpfc_attr.c | 4 +- drivers/scsi/lpfc/lpfc_crtn.h | 4 +- drivers/scsi/lpfc/lpfc_els.c | 30 +-- drivers/scsi/lpfc/lpfc_hbadisc.c | 24 +- drivers/scsi/lpfc/lpfc_hw4.h | 11 +- drivers/scsi/lpfc/lpfc_init.c | 26 +- drivers/scsi/lpfc/lpfc_nvme.c | 44 ++-- drivers/scsi/lpfc/lpfc_scsi.c | 3 +- drivers/scsi/lpfc/lpfc_sli.c | 392 +++++++++++++++++++------------ drivers/scsi/lpfc/lpfc_sli4.h | 4 +- drivers/scsi/lpfc/lpfc_version.h | 2 +- 11 files changed, 309 insertions(+), 235 deletions(-)
Signature · 1 line
2.38.0
PATCH 1/7 lpfc: Fix verbose logging for scsi commands issued to SES devices
For SES LUNs with scsi_device sector_size member set to zero, there is no point to log an LBA. When verbose FCP driver logging is enabled, sanity check sector_size before calling scsi_get_lba on a scsi_cmnd.
--- drivers/scsi/lpfc/lpfc_scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_scsi.c +2 -1
@@ -4273,7 +4273,8 @@ lpfc_fcp_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,"x%x SNS x%x x%x LBA x%llx Data: x%x x%x\n" , cmd->device->id, cmd->device->lun, cmd, cmd->result, *lp, *(lp +3 ), - (u64 )scsi_get_lba (cmd), + (cmd->device->sector_size) ? + (u64 )scsi_get_lba (cmd) :0 , cmd->retries, scsi_get_resid(cmd)); }
Signature · 1 line
2.38.0
PATCH 2/7 lpfc: Fix double free in lpfc_cmpl_els_logo_acc caused by lpfc_nlp_not_used
In reply to Justin TeeSmatch detected a double free path because lpfc_nlp_not_used releases an ndlp object before reaching lpfc_nlp_put at the end of lpfc_cmpl_els_logo_acc.
Remove the outdated lpfc_nlp_not_used routine. In lpfc_mbx_cmpl_ns_reg_login, replace the call with lpfc_nlp_put. In lpfc_cmpl_els_logo_acc, replace the call with lpfc_unreg_rpi and keep the lpfc_nlp_put at the end of the routine. If ndlp's rpi was registered, then lpfc_unreg_rpi's completion routine performs the final ndlp clean up after lpfc_nlp_put is called from lpfc_cmpl_els_logo_acc. Otherwise if ndlp has no rpi registered, the lpfc_nlp_put at the end of lpfc_cmpl_els_logo_acc is the final ndlp clean up.
--- drivers/scsi/lpfc/lpfc_crtn.h | 1 - drivers/scsi/lpfc/lpfc_els.c | 30 +++++++----------------------- drivers/scsi/lpfc/lpfc_hbadisc.c | 24 +++--------------------- 3 files changed, 10 insertions(+), 45 deletions(-)
drivers/scsi/lpfc/lpfc_crtn.h +0 -1
@@ -134,7 +134,6 @@ void lpfc_check_nlp_post_devloss(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp);void lpfc_ignore_els_cmpl (struct lpfc_hba *phba,struct lpfc_iocbq *cmdiocb,struct lpfc_iocbq *rspiocb); -int lpfc_nlp_not_used (struct lpfc_nodelist *ndlp);struct lpfc_nodelist *lpfc_setup_disc_node (struct lpfc_vport *,uint32_t );void lpfc_disc_list_loopmap (struct lpfc_vport *);void lpfc_disc_start (struct lpfc_vport *);
drivers/scsi/lpfc/lpfc_els.c +7 -23
@@ -5205,14 +5205,9 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb)* * This routine is the completion callback function to the Logout (LOGO) * Accept (ACC) Response ELS command. This routine is invoked to indicate -* the completion of the LOGO process. It invokes the lpfc_nlp_not_used() to -* release the ndlp if it has the last reference remaining (reference count -* is 1). If succeeded (meaning ndlp released), it sets the iocb ndlp -* field to NULL to inform the following lpfc_els_free_iocb() routine no -* ndlp reference count needs to be decremented. Otherwise, the ndlp -* reference use-count shall be decremented by the lpfc_els_free_iocb() -* routine. Finally, the lpfc_els_free_iocb() is invoked to release the -* IOCB data structure. +* the completion of the LOGO process. If the node has transitioned to NPR, +* this routine unregisters the RPI if it is still registered. The +* lpfc_els_free_iocb() is invoked to release the IOCB data structure. **/ static void lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
@@ -5253,19 +5248,9 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, (ndlp->nlp_last_elscmd == ELS_CMD_PLOGI)) goto out; -/* NPort Recovery mode or node is just allocated */ -if (!lpfc_nlp_not_used (ndlp)) { -/* A LOGO is completing and the node is in NPR state. -* Just unregister the RPI because the node is still -* required. -*/ +if (ndlp->nlp_flag &NLP_RPI_REGISTERED )lpfc_unreg_rpi (vport, ndlp); - }else { -/* Indicate the node has already released, should -* not reference to it from within lpfc_els_free_iocb. -*/ - cmdiocb->ndlp =NULL ; - } + } out:/*
@@ -5285,9 +5270,8 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,* RPI (Remote Port Index) mailbox command to the @phba. It simply releases * the associated lpfc Direct Memory Access (DMA) buffer back to the pool and * decrements the ndlp reference count held for this completion callback -* function. After that, it invokes the lpfc_nlp_not_used() to check -* whether there is only one reference left on the ndlp. If so, it will -* perform one more decrement and trigger the release of the ndlp. +* function. After that, it invokes the lpfc_drop_node to check +* whether it is appropriate to release the node. **/ void lpfc_mbx_cmpl_dflt_rpi (struct lpfc_hba *phba,LPFC_MBOXQ_t *pmb)
drivers/scsi/lpfc/lpfc_hbadisc.c +3 -21
@@ -4333,13 +4333,14 @@ lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)/* If the node is not registered with the scsi or nvme * transport, remove the fabric node. The failed reg_login -* is terminal. +* is terminal and forces the removal of the last node +* reference. */ if (!(ndlp->fc4_xpt_flags & (SCSI_XPT_REGD |NVME_XPT_REGD ))) {spin_lock_irq (&ndlp->lock); ndlp->nlp_flag &= ~NLP_NPR_2B_DISC ;spin_unlock_irq (&ndlp->lock); -lpfc_nlp_not_used (ndlp); +lpfc_nlp_put (ndlp); }if (phba->fc_topology ==LPFC_TOPOLOGY_LOOP ) {
@@ -6704,25 +6705,6 @@ lpfc_nlp_put(struct lpfc_nodelist *ndlp)return ndlp ?kref_put (&ndlp->kref, lpfc_nlp_release) :0 ; } -/* This routine free's the specified nodelist if it is not in use -* by any other discovery thread. This routine returns 1 if the -* ndlp has been freed. A return value of 0 indicates the ndlp is -* not yet been released. -*/ -int -lpfc_nlp_not_used (struct lpfc_nodelist *ndlp) -{ -lpfc_debugfs_disc_trc (ndlp->vport,LPFC_DISC_TRC_NODE , -"node not used: did:x%x flg:x%x refcnt:x%x" , - ndlp->nlp_DID, ndlp->nlp_flag, -kref_read (&ndlp->kref)); - -if (kref_read (&ndlp->kref) ==1 ) -if (lpfc_nlp_put (ndlp)) -return 1 ; -return 0 ; -} -/** * lpfc_fcf_inuse - Check if FCF can be unregistered. * @phba: Pointer to hba context object.
Signature · 1 line
2.38.0
PATCH 3/7 lpfc: Match lock ordering of lpfc_cmd->buf_lock and hbalock for abort paths
In reply to Justin TeeThe SCSI version of the abort handler routine, lpfc_abort_handler, takes the lpfc_cmd->buf_lock and then phba->hbalock.
Make the same change for the NVME abort path, lpfc_nvme_fcp_abort, to have consistent lock ordering logic between the two abort paths.
--- drivers/scsi/lpfc/lpfc_nvme.c | 44 +++++++++++++++++------------------ 1 file changed, 22 insertions(+), 22 deletions(-)
drivers/scsi/lpfc/lpfc_nvme.c +22 -22
@@ -1893,38 +1893,38 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport, pnvme_rport->port_id, pnvme_fcreq); -/* If the hba is getting reset, this flag is set. It is -* cleared when the reset is complete and rings reestablished. -*/ -spin_lock_irqsave (&phba->hbalock, flags); -/* driver queued commands are in process of being flushed */ -if (phba->hba_flag &HBA_IOQ_FLUSH ) { -spin_unlock_irqrestore (&phba->hbalock, flags); -lpfc_printf_vlog (vport,KERN_ERR ,LOG_TRACE_EVENT , -"6139 Driver in reset cleanup - flushing " -"NVME Req now. hba_flag x%x\n" , - phba->hba_flag); -return ; - } - lpfc_nbuf = freqpriv->nvme_buf;if (!lpfc_nbuf) { -spin_unlock_irqrestore (&phba->hbalock, flags);lpfc_printf_vlog (vport,KERN_ERR ,LOG_TRACE_EVENT ,"6140 NVME IO req has no matching lpfc nvme " "io buffer. Skipping abort req.\n" );return ; }else if (!lpfc_nbuf->nvmeCmd) { -spin_unlock_irqrestore (&phba->hbalock, flags);lpfc_printf_vlog (vport,KERN_ERR ,LOG_TRACE_EVENT ,"6141 lpfc NVME IO req has no nvme_fcreq " "io buffer. Skipping abort req.\n" );return ; } - nvmereq_wqe = &lpfc_nbuf->cur_iocbq;/* Guard against IO completion being called at same time */ -spin_lock (&lpfc_nbuf->buf_lock); +spin_lock_irqsave (&lpfc_nbuf->buf_lock, flags); + +/* If the hba is getting reset, this flag is set. It is +* cleared when the reset is complete and rings reestablished. +*/ +spin_lock (&phba->hbalock); +/* driver queued commands are in process of being flushed */ +if (phba->hba_flag &HBA_IOQ_FLUSH ) { +spin_unlock (&phba->hbalock); +spin_unlock_irqrestore (&lpfc_nbuf->buf_lock, flags); +lpfc_printf_vlog (vport,KERN_ERR ,LOG_TRACE_EVENT , +"6139 Driver in reset cleanup - flushing " +"NVME Req now. hba_flag x%x\n" , + phba->hba_flag); +return ; + } + + nvmereq_wqe = &lpfc_nbuf->cur_iocbq;/* * The lpfc_nbuf and the mapped nvme_fcreq in the driver's
@@ -1971,8 +1971,8 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport, ret_val =lpfc_sli4_issue_abort_iotag (phba, nvmereq_wqe, lpfc_nvme_abort_fcreq_cmpl); -spin_unlock (&lpfc_nbuf->buf_lock); -spin_unlock_irqrestore (&phba->hbalock, flags); +spin_unlock (&phba->hbalock); +spin_unlock_irqrestore (&lpfc_nbuf->buf_lock, flags);/* Make sure HBA is alive */ lpfc_issue_hb_tmo (phba);
@@ -1998,8 +1998,8 @@ lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,return ; out_unlock: -spin_unlock (&lpfc_nbuf->buf_lock); -spin_unlock_irqrestore (&phba->hbalock, flags); +spin_unlock (&phba->hbalock); +spin_unlock_irqrestore (&lpfc_nbuf->buf_lock, flags);return ; }
Signature · 1 line
2.38.0
PATCH 4/7 lpfc: Update congestion warning notification period
In reply to Justin TeeThe CMF_SYNC_WQE command is updated to use an 8 bit field sync period. All related variables used to calculate congestion warning notifications are updated to 8 bit fields accordingly.
--- drivers/scsi/lpfc/lpfc_attr.c | 4 ++-- drivers/scsi/lpfc/lpfc_crtn.h | 2 +- drivers/scsi/lpfc/lpfc_hw4.h | 4 ++-- drivers/scsi/lpfc/lpfc_sli.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +2 -2
@@ -5858,8 +5858,8 @@ int lpfc_fabric_cgn_frequency = 100; /* 100 ms default */module_param (lpfc_fabric_cgn_frequency, int,0444 );MODULE_PARM_DESC (lpfc_fabric_cgn_frequency,"Congestion signaling fabric freq" ); -int lpfc_acqe_cgn_frequency =10 ;/* 10 sec default */ -module_param (lpfc_acqe_cgn_frequency, int,0444 ); +unsigned char lpfc_acqe_cgn_frequency =10 ;/* 10 sec default */ +module_param (lpfc_acqe_cgn_frequency, byte,0444 );MODULE_PARM_DESC (lpfc_acqe_cgn_frequency,"Congestion signaling ACQE freq" );int lpfc_use_cgn_signal =1 ;/* 0 - only use FPINs, 1 - Use signals if avail */
drivers/scsi/lpfc/lpfc_crtn.h +1 -1
@@ -663,7 +663,7 @@ extern int lpfc_enable_nvmet_cnt;extern unsigned long long lpfc_enable_nvmet[];extern int lpfc_no_hba_reset_cnt;extern unsigned long lpfc_no_hba_reset[]; -extern int lpfc_acqe_cgn_frequency; +extern unsigned char lpfc_acqe_cgn_frequency;extern int lpfc_fabric_cgn_frequency;extern int lpfc_use_cgn_signal;
drivers/scsi/lpfc/lpfc_hw4.h +2 -2
@@ -4813,8 +4813,8 @@ struct cmf_sync_wqe {#define cmf_sync_cqid_WORD word11uint32_t read_bytes;uint32_t word13; -#define cmf_sync_period_SHIFT 16 -#define cmf_sync_period_MASK 0x0000ffff +#define cmf_sync_period_SHIFT 24 +#define cmf_sync_period_MASK 0x000000ff#define cmf_sync_period_WORD word13uint32_t word14;uint32_t word15;
drivers/scsi/lpfc/lpfc_sli.c +1 -1
@@ -1931,7 +1931,7 @@ lpfc_issue_cmf_sync_wqe(struct lpfc_hba *phba, u32 ms, u64 total)unsigned long iflags;u32 ret_val;u32 atot, wtot, max; -u16 warn_sync_period =0 ; +u8 warn_sync_period =0 ;/* First address any alarm / warning activity */ atot =atomic_xchg (&phba->cgn_sync_alarm_cnt,0 );
Signature · 1 line
2.38.0
PATCH 5/7 lpfc: Add new RCQE status for handling DMA failures
In reply to Justin TeeA new RCQE status value indicating DMA failure when transferring asynchronously received data to an RQE is introduced. Such errors are unexpected and handlers are updated to log KERN_ERR and dump lpfc's debug trace buffer to kmsg.
--- drivers/scsi/lpfc/lpfc_hw4.h | 7 ++-- drivers/scsi/lpfc/lpfc_sli.c | 64 ++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 3 deletions(-)
drivers/scsi/lpfc/lpfc_hw4.h +4 -3
@@ -536,9 +536,9 @@ struct sli4_wcqe_xri_aborted {/* completion queue entry structure for rqe completion */ struct lpfc_rcqe {uint32_t word0; -#define lpfc_rcqe_bindex_SHIFT 16 -#define lpfc_rcqe_bindex_MASK 0x0000FFF -#define lpfc_rcqe_bindex_WORD word0 +#define lpfc_rcqe_iv_SHIFT 31 +#define lpfc_rcqe_iv_MASK 0x00000001 +#define lpfc_rcqe_iv_WORD word0#define lpfc_rcqe_status_SHIFT 8#define lpfc_rcqe_status_MASK 0x000000FF#define lpfc_rcqe_status_WORD word0
@@ -546,6 +546,7 @@ struct lpfc_rcqe {#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 0x11/* payload truncated */ #define FC_STATUS_INSUFF_BUF_NEED_BUF 0x12/* Insufficient buffers */ #define FC_STATUS_INSUFF_BUF_FRM_DISC 0x13/* Frame Discard */ +#define FC_STATUS_RQ_DMA_FAILURE 0x14/* DMA failure */ uint32_t word1;#define lpfc_rcqe_fcf_id_v1_SHIFT 0#define lpfc_rcqe_fcf_id_v1_MASK 0x0000003F
drivers/scsi/lpfc/lpfc_sli.c +64 -0
76 lines not on this page · raw message
Signature · 1 line
2.38.0
PATCH 6/7 lpfc: Replace blk_irq_poll intr handler with threaded irq
In reply to Justin TeeIt has been determined that the threaded irq API accomplishes effectively the same performance metrics as blk_irq_poll. As blk_irq_poll is mostly scheduled by the softirqd and handled in softirq context, this is not entirely desired from a fibre channel driver context. A threaded irq model fits cleaner. This patch replaces the blk_irq_poll logic with threaded irq.
--- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_init.c | 26 +-- drivers/scsi/lpfc/lpfc_sli.c | 326 +++++++++++++++++++--------------- drivers/scsi/lpfc/lpfc_sli4.h | 4 +- 4 files changed, 200 insertions(+), 157 deletions(-)
drivers/scsi/lpfc/lpfc_crtn.h +1 -0
@@ -247,6 +247,7 @@ irqreturn_t lpfc_sli_sp_intr_handler(int, void *);irqreturn_t lpfc_sli_fp_intr_handler (int ,void *);irqreturn_t lpfc_sli4_intr_handler (int ,void *);irqreturn_t lpfc_sli4_hba_intr_handler (int ,void *); +irqreturn_t lpfc_sli4_hba_intr_handler_th (int irq,void *dev_id);int lpfc_read_object (struct lpfc_hba *phba,char *s,uint32_t *datap,uint32_t len);
drivers/scsi/lpfc/lpfc_init.c +15 -11
@@ -1279,7 +1279,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)/* * lpfc_idle_stat_delay_work - idle_stat tracking * -* This routine tracks per-cq idle_stat and determines polling decisions. +* This routine tracks per-eq idle_stat and determines polling decisions. * * Return codes: * None
@@ -1290,7 +1290,7 @@ lpfc_idle_stat_delay_work(struct work_struct *work)struct lpfc_hba *phba =container_of (to_delayed_work (work), struct lpfc_hba, idle_stat_delay_work); -struct lpfc_queue *cq; +struct lpfc_queue *eq;struct lpfc_sli4_hdw_queue *hdwq;struct lpfc_idle_stat *idle_stat;u32 i, idle_percent;
@@ -1306,10 +1306,10 @@ lpfc_idle_stat_delay_work(struct work_struct *work)for_each_present_cpu (i) { hdwq = &phba->sli4_hba.hdwq[phba->sli4_hba.cpu_map[i].hdwq]; - cq = hdwq->io_cq; + eq = hdwq->hba_eq; -/* Skip if we've already handled this cq's primary CPU */ -if (cq->chann != i) +/* Skip if we've already handled this eq's primary CPU */ +if (eq->chann != i)continue ; idle_stat = &phba->sli4_hba.idle_stat[i];
@@ -1333,9 +1333,9 @@ lpfc_idle_stat_delay_work(struct work_struct *work) idle_percent =100 - idle_percent;if (idle_percent <15 ) - cq->poll_mode =LPFC_QUEUE_WORK ; + eq->poll_mode =LPFC_QUEUE_WORK ;else - cq->poll_mode =LPFC_IRQ_POLL ; + eq->poll_mode =LPFC_THREADED_IRQ ; idle_stat->prev_idle = wall_idle; idle_stat->prev_wall = wall;
@@ -4357,6 +4357,7 @@ lpfc_io_buf_replenish(struct lpfc_hba *phba, struct list_head *cbuf)struct lpfc_sli4_hdw_queue *qp;struct lpfc_io_buf *lpfc_cmd;int idx, cnt; +unsigned long iflags; qp = phba->sli4_hba.hdwq; cnt =0 ;
@@ -4371,12 +4372,13 @@ lpfc_io_buf_replenish(struct lpfc_hba *phba, struct list_head *cbuf) lpfc_cmd->hdwq_no = idx; lpfc_cmd->hdwq = qp; lpfc_cmd->cur_iocbq.cmd_cmpl =NULL ; -spin_lock (&qp->io_buf_list_put_lock); +spin_lock_irqsave (&qp->io_buf_list_put_lock, iflags);list_add_tail (&lpfc_cmd->list, &qp->lpfc_io_buf_list_put); qp->put_io_bufs++; qp->total_io_bufs++; -spin_unlock (&qp->io_buf_list_put_lock); +spin_unlock_irqrestore (&qp->io_buf_list_put_lock, + iflags); } }return cnt;
@@ -13114,8 +13116,10 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba) } eqhdl->irq = rc; - rc =request_irq (eqhdl->irq, &lpfc_sli4_hba_intr_handler,0 , - name, eqhdl); + rc =request_threaded_irq (eqhdl->irq, + &lpfc_sli4_hba_intr_handler, + &lpfc_sli4_hba_intr_handler_th, +IRQF_ONESHOT , name, eqhdl);if (rc) {lpfc_printf_log (phba,KERN_WARNING ,LOG_INIT , "0486 MSI-X fast-path (%d) "
drivers/scsi/lpfc/lpfc_sli.c +183 -143
502 lines not on this page · raw message
drivers/scsi/lpfc/lpfc_sli4.h +1 -3
@@ -140,7 +140,7 @@ struct lpfc_rqb {enum lpfc_poll_mode {LPFC_QUEUE_WORK , -LPFC_IRQ_POLL +LPFC_THREADED_IRQ , };struct lpfc_idle_stat {
@@ -279,8 +279,6 @@ struct lpfc_queue {struct list_head _poll_list;void **q_pgs;/* array to index entries per page */ -#define LPFC_IRQ_POLL_WEIGHT 256 -struct irq_poll iop;enum lpfc_poll_mode poll_mode; };
Signature · 1 line
2.38.0
PATCH 7/7 lpfc: Update lpfc version to 14.2.0.12
In reply to Justin TeeUpdate lpfc version to 14.2.0.12
--- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_version.h +1 -1
@@ -20,7 +20,7 @@* included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "14.2.0.11" +#define LPFC_DRIVER_VERSION "14.2.0.12"#define LPFC_DRIVER_NAME "lpfc"/* Used for SLI 2/3 */
Signature · 1 line
2.38.0
Martin K. Petersen
AppliedJustin,
Quoted 1 line
Update lpfc to revision 14.2.0.12
Applied to 6.5/scsi-staging, thanks!
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering
Martin K. Petersen
AppliedQuoted 9 lines · Justin Tee
Update lpfc to revision 14.2.0.12
This patch set contains fixes flagged by code analyzer tools, introduces a new CQE status to handle DMA errors, and replaces the usage of blk interrupts with threaded interrupts.
The patches were cut against Martin's 6.4/scsi-queue tree.
[...]
Applied to 6.5/scsi-queue, thanks!
[1/7] lpfc: Fix verbose logging for scsi commands issued to SES devices
https://git.kernel.org/mkp/scsi/c/84c868a702f5 [2/7] lpfc: Fix double free in lpfc_cmpl_els_logo_acc caused by lpfc_nlp_not_used https://git.kernel.org/mkp/scsi/c/97f975823f81 [3/7] lpfc: Match lock ordering of lpfc_cmd->buf_lock and hbalock for abort paths https://git.kernel.org/mkp/scsi/c/78e9e35004fd [4/7] lpfc: Update congestion warning notification period https://git.kernel.org/mkp/scsi/c/779d61dfb9ea [5/7] lpfc: Add new RCQE status for handling DMA failures https://git.kernel.org/mkp/scsi/c/5fc849d8056d [6/7] lpfc: Replace blk_irq_poll intr handler with threaded irq https://git.kernel.org/mkp/scsi/c/a7b94c159210 [7/7] lpfc: Update lpfc version to 14.2.0.12 https://git.kernel.org/mkp/scsi/c/fd9ffa6c747f
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering