Skip to contentSkip to conversation

PCI: Tidy controller Kconfig

PATCH Applied Bjorn Helgaas 4 participants 14 messages Apr 18, 2023 – Apr 20, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover PCI: Tidy controller Kconfig

From: Bjorn Helgaas <[email protected]>

Use vendor name in all native controller Kconfig entries. Use consistent prompt language. Sort entries by vendor name so they appear in alpha order in menuconfig.

Bjorn Helgaas (7):
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: Use consistent controller Kconfig menu entry language
PCI: Sort controller Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: mobiveil: Sort Kconfig entries by vendor

 drivers/pci/controller/Kconfig          | 463 ++++++++++-----------
 drivers/pci/controller/cadence/Kconfig  |  10 +-
 drivers/pci/controller/dwc/Kconfig      | 518 ++++++++++++------------
 drivers/pci/controller/mobiveil/Kconfig |  19 +-
 4 files changed, 506 insertions(+), 504 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/7 PCI: meson: Add 'Amlogic' to Kconfig prompt

From: Bjorn Helgaas <[email protected]>

Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig prompts.

---
 drivers/pci/controller/dwc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/dwc/Kconfig +1 -1
index d29551261e80..617fcc7563ae 100644
@@ -321,7 +321,7 @@ config PCIE_HISI_STB
 	  Say Y here if you want PCIe controller support on HiSilicon STB SoCs
 
 config PCI_MESON
-	tristate "MESON PCIe controller"
+	tristate "Amlogic Meson PCIe controller"
 	default m if ARCH_MESON
 	depends on PCI_MSI
 	select PCIE_DW_HOST
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH 1/7] PCI: meson: Add 'Amlogic' to Kconfig prompt

Quoted 5 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig prompts.

Did you mean, do not capitalize "Meson" or did you intend to preserve the previous hunk that had "Meson" capitalized?

Signature · 1 line
Florian
#3 lore raw

Re: [PATCH 1/7] PCI: meson: Add 'Amlogic' to Kconfig prompt

Quoted 9 lines · Florian Fainelli
Quoted 5 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig prompts.

Did you mean, do not capitalize "Meson" or did you intend to preserve the previous hunk that had "Meson" capitalized?

I made it match other Meson prompts:

arch/arm/mach-meson/Kconfig- bool "Amlogic Meson6 (8726MX) SoCs support"
drivers/char/hw_random/Kconfig- tristate "Amlogic Meson Random Number Generator support"

  drivers/clk/meson/Kconfig-      bool "Meson8 SoC Clock controller support"
  drivers/gpu/drm/meson/Kconfig-  tristate "DRM Support for Amlogic Meson Display Controller"
  drivers/i2c/busses/Kconfig-     tristate "Amlogic Meson I2C controller"
  drivers/iio/adc/Kconfig-        tristate "Amlogic Meson SAR ADC driver"

drivers/media/cec/platform/Kconfig- tristate "Amlogic Meson AO CEC driver"

So I guess could have described as "style Meson with initial cap only instead of all caps" or something.

Bjorn

#4 lore raw

Re: [PATCH 1/7] PCI: meson: Add 'Amlogic' to Kconfig prompt

Quoted 15 lines · Bjorn Helgaas
Quoted 9 lines · Florian Fainelli
Quoted 5 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add the "Amlogic" vendor name to the CONFIG_PCI_MESON Kconfig prompt to match other PCIe drivers. Capitalize "Meson" to match other Meson Kconfig prompts.

Did you mean, do not capitalize "Meson" or did you intend to preserve the previous hunk that had "Meson" capitalized?

I made it match other Meson prompts:

arch/arm/mach-meson/Kconfig- bool "Amlogic Meson6 (8726MX) SoCs support"
drivers/char/hw_random/Kconfig- tristate "Amlogic Meson Random Number Generator support"

Quoted 8 lines
   drivers/clk/meson/Kconfig-      bool "Meson8 SoC Clock controller support"
   drivers/gpu/drm/meson/Kconfig-  tristate "DRM Support for Amlogic Meson Display Controller"
   drivers/i2c/busses/Kconfig-     tristate "Amlogic Meson I2C controller"
   drivers/iio/adc/Kconfig-        tristate "Amlogic Meson SAR ADC driver"

drivers/media/cec/platform/Kconfig- tristate "Amlogic Meson AO CEC driver"

So I guess could have described as "style Meson with initial cap only instead of all caps" or something.

This is fine, I was just reading it wrong, as meaning all capital letters. Thanks.

Signature · 1 line
Florian
#5 lore raw

PATCH 2/7 PCI: hv: Add 'Microsoft' to Kconfig prompt

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add the "Microsoft" vendor name to the CONFIG_PCI_HYPERV_INTERFACE Kconfig prompt so it matches other PCIe drivers and other Hyper-V prompts.

Cc K. Y. Srinivasan <[email protected]>
Cc Haiyang Zhang <[email protected]>
Cc Wei Liu <[email protected]>
Cc Dexuan Cui <[email protected]>
---
 drivers/pci/controller/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/pci/controller/Kconfig +4 -3
index 42654035654a..8b1f9a3f83ea 100644
@@ -285,11 +285,12 @@ config PCIE_BRCMSTB
 	  Broadcom STB based SoCs, like the Raspberry Pi 4.
 
 config PCI_HYPERV_INTERFACE
-	tristate "Hyper-V PCI Interface"
+	tristate "Microsoft Hyper-V PCI Interface"
 	depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI
 	help
-	  The Hyper-V PCI Interface is a helper driver allows other drivers to
-	  have a common interface with the Hyper-V PCI frontend driver.
+	  The Hyper-V PCI Interface is a helper driver that allows other
+	  drivers to have a common interface with the Hyper-V PCI frontend
+	  driver.
 
 config PCI_LOONGSON
 	bool "LOONGSON PCI Controller"
Signature · 1 line
2.25.1
Acked-by on v1 2/7
#6 lore raw

Re: [PATCH 2/7] PCI: hv: Add 'Microsoft' to Kconfig prompt

Quoted 10 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add the "Microsoft" vendor name to the CONFIG_PCI_HYPERV_INTERFACE Kconfig prompt so it matches other PCIe drivers and other Hyper-V prompts.

Cc K. Y. Srinivasan <[email protected]>
Cc Haiyang Zhang <[email protected]>
Cc Wei Liu <[email protected]>
Cc Dexuan Cui <[email protected]>
Quoted 27 lines
---
 drivers/pci/controller/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/pci/controller/Kconfig +4 -3
index 42654035654a..8b1f9a3f83ea 100644
@@ -285,11 +285,12 @@ config PCIE_BRCMSTB
 	  Broadcom STB based SoCs, like the Raspberry Pi 4.
 
 config PCI_HYPERV_INTERFACE
-	tristate "Hyper-V PCI Interface"
+	tristate "Microsoft Hyper-V PCI Interface"
 	depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI
 	help
-	  The Hyper-V PCI Interface is a helper driver allows other drivers to
-	  have a common interface with the Hyper-V PCI frontend driver.
+	  The Hyper-V PCI Interface is a helper driver that allows other
+	  drivers to have a common interface with the Hyper-V PCI frontend
+	  driver.
 
 config PCI_LOONGSON
 	bool "LOONGSON PCI Controller"
Signature · 1 line
2.25.1
#7 lore raw

PATCH 3/7 PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add the "Xilinx" vendor name to the CONFIG_PCIE_XILINX_NWL Kconfig prompt so it matches other drivers. Rename from "PCIe Core" to "PCIe controller".

---
 drivers/pci/controller/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/Kconfig +1 -1
index 8b1f9a3f83ea..5875587d8b59 100644
@@ -28,7 +28,7 @@ config PCI_AARDVARK
 	 3700 SoC.
 
 config PCIE_XILINX_NWL
-	bool "NWL PCIe Core"
+	bool "Xilinx NWL PCIe controller"
 	depends on ARCH_ZYNQMP || COMPILE_TEST
 	depends on PCI_MSI
 	help
Signature · 1 line
2.25.1
Acked-by on v1 3/7
#8 lore raw

Re: [PATCH 3/7] PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt

Quoted 26 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Add the "Xilinx" vendor name to the CONFIG_PCIE_XILINX_NWL Kconfig prompt so it matches other drivers. Rename from "PCIe Core" to "PCIe controller".

---
  drivers/pci/controller/Kconfig | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/Kconfig +1 -2
index 8b1f9a3f83ea..5875587d8b59 100644
@@ -28,7 +28,7 @@ config PCI_AARDVARK
          3700 SoC.
 
  config PCIE_XILINX_NWL
-       bool "NWL PCIe Core"
+       bool "Xilinx NWL PCIe controller"
         depends on ARCH_ZYNQMP || COMPILE_TEST
         depends on PCI_MSI
         help
--
Quoted 2 lines

2.25.1

Thanks,
Michal

#9 lore raw

PATCH 4/7 PCI: Use consistent controller Kconfig menu entry language

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Use "PCIe controller" consistently instead of "host bridge", "bus driver", etc. Annotate with "(host mode)" or "(endpoint mode)" as needed.

---
 drivers/pci/controller/Kconfig          | 22 +++++-----
 drivers/pci/controller/cadence/Kconfig  | 10 ++---
 drivers/pci/controller/dwc/Kconfig      | 54 ++++++++++++-------------
 drivers/pci/controller/mobiveil/Kconfig |  4 +-
 4 files changed, 45 insertions(+), 45 deletions(-)
drivers/pci/controller/Kconfig +11 -11
index 5875587d8b59..7690cc7bbd3f 100644
@@ -69,7 +69,7 @@ config PCI_RCAR_GEN2
 	  built-in EHCI/OHCI host controller present on each one.
 
 config PCIE_RCAR_HOST
-	bool "Renesas R-Car PCIe host controller"
+	bool "Renesas R-Car PCIe controller (host mode)"
 	depends on ARCH_RENESAS || COMPILE_TEST
 	depends on PCI_MSI
 	help
@@ -77,7 +77,7 @@ config PCIE_RCAR_HOST
 	  mode.
 
 config PCIE_RCAR_EP
-	bool "Renesas R-Car PCIe endpoint controller"
+	bool "Renesas R-Car PCIe controller (endpoint mode)"
 	depends on ARCH_RENESAS || COMPILE_TEST
 	depends on PCI_ENDPOINT
 	help
@@ -98,7 +98,7 @@ config PCI_HOST_GENERIC
 	  controller, such as the one emulated by kvmtool.
 
 config PCIE_XILINX
-	bool "Xilinx AXI PCIe host bridge support"
+	bool "Xilinx AXI PCIe controller"
 	depends on OF || COMPILE_TEST
 	depends on PCI_MSI
 	help
@@ -106,7 +106,7 @@ config PCIE_XILINX
 	  Host Bridge driver.
 
 config PCIE_XILINX_CPM
-	bool "Xilinx Versal CPM host bridge support"
+	bool "Xilinx Versal CPM PCI controller"
 	depends on ARCH_ZYNQMP || COMPILE_TEST
 	select PCI_HOST_COMMON
 	help
@@ -159,7 +159,7 @@ config PCIE_IPROC_PLATFORM
 	  through the generic platform bus interface
 
 config PCIE_IPROC_BCMA
-	tristate "Broadcom iProc PCIe BCMA bus driver"
+	tristate "Broadcom iProc BCMA PCIe controller"
 	depends on ARM && (ARCH_BCM_IPROC || COMPILE_TEST)
 	select PCIE_IPROC
 	select BCMA
@@ -213,7 +213,7 @@ config PCIE_ROCKCHIP
 	depends on PCI
 
 config PCIE_ROCKCHIP_HOST
-	tristate "Rockchip PCIe host controller"
+	tristate "Rockchip PCIe controller (host mode)"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI
@@ -225,7 +225,7 @@ config PCIE_ROCKCHIP_HOST
 	  4 slots.
 
 config PCIE_ROCKCHIP_EP
-	bool "Rockchip PCIe endpoint controller"
+	bool "Rockchip PCIe controller (endpoint mode)"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
 	depends on OF
 	depends on PCI_ENDPOINT
@@ -274,7 +274,7 @@ config VMD
 	  module will be called vmd.
 
 config PCIE_BRCMSTB
-	tristate "Broadcom Brcmstb PCIe host controller"
+	tristate "Broadcom Brcmstb PCIe controller"
 	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
 		   BMIPS_GENERIC || COMPILE_TEST
 	depends on OF
@@ -293,7 +293,7 @@ config PCI_HYPERV_INTERFACE
 	  driver.
 
 config PCI_LOONGSON
-	bool "LOONGSON PCI Controller"
+	bool "LOONGSON PCIe controller"
 	depends on MACH_LOONGSON64 || COMPILE_TEST
 	depends on OF || ACPI
 	depends on PCI_QUIRKS
@@ -303,7 +303,7 @@ config PCI_LOONGSON
 	  Loongson systems.
 
 config PCIE_MICROCHIP_HOST
-	bool "Microchip AXI PCIe host bridge support"
+	bool "Microchip AXI PCIe controller"
 	depends on PCI_MSI && OF
 	select PCI_HOST_COMMON
 	help
@@ -336,7 +336,7 @@ config PCIE_APPLE
 	  If unsure, say Y if you have an Apple Silicon system.
 
 config PCIE_MT7621
-	tristate "MediaTek MT7621 PCIe Controller"
+	tristate "MediaTek MT7621 PCIe controller"
 	depends on SOC_MT7621 || COMPILE_TEST
 	select PHY_MT7621_PCI
 	default SOC_MT7621
drivers/pci/controller/cadence/Kconfig +5 -5
index 5d30564190e1..291d12711363 100644
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-menu "Cadence PCIe controllers support"
+menu "Cadence-based PCIe controllers"
 	depends on PCI
 
 config PCIE_CADENCE
@@ -22,7 +22,7 @@ config PCIE_CADENCE_PLAT
 	bool
 
 config PCIE_CADENCE_PLAT_HOST
-	bool "Cadence PCIe platform host controller"
+	bool "Cadence platform PCIe controller (host mode)"
 	depends on OF
 	select PCIE_CADENCE_HOST
 	select PCIE_CADENCE_PLAT
@@ -32,7 +32,7 @@ config PCIE_CADENCE_PLAT_HOST
 	  vendors SoCs.
 
 config PCIE_CADENCE_PLAT_EP
-	bool "Cadence PCIe platform endpoint controller"
+	bool "Cadence platform PCIe controller (endpoint mode)"
 	depends on OF
 	depends on PCI_ENDPOINT
 	select PCIE_CADENCE_EP
@@ -46,7 +46,7 @@ config PCI_J721E
 	bool
 
 config PCI_J721E_HOST
-	bool "TI J721E PCIe platform host controller"
+	bool "TI J721E PCIe controller (host mode)"
 	depends on OF
 	select PCIE_CADENCE_HOST
 	select PCI_J721E
@@ -56,7 +56,7 @@ config PCI_J721E_HOST
 	  core.
 
 config PCI_J721E_EP
-	bool "TI J721E PCIe platform endpoint controller"
+	bool "TI J721E PCIe controller (endpoint mode)"
 	depends on OF
 	depends on PCI_ENDPOINT
 	select PCIE_CADENCE_EP
drivers/pci/controller/dwc/Kconfig +27 -27

215 lines not on this page · raw message

drivers/pci/controller/mobiveil/Kconfig +2 -2
index 1d7a07ba9ccd..bc9c624cf619 100644
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-menu "Mobiveil PCIe Core Support"
+menu "Mobiveil-based PCIe controllers"
 	depends on PCI
 
 config PCIE_MOBIVEIL
@@ -23,7 +23,7 @@ config PCIE_MOBIVEIL_PLAT
 	  for address translation and it is a PCIe Gen4 IP.
 
 config PCIE_LAYERSCAPE_GEN4
-	bool "Freescale Layerscape PCIe Gen4 controller"
+	bool "Freescale Layerscape Gen4 PCIe controller"
 	depends on ARCH_LAYERSCAPE || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_MOBIVEIL_HOST
Signature · 1 line
2.25.1
#10 lore raw

PATCH 5/7 PCI: Sort controller Kconfig entries by vendor

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig.

---
 drivers/pci/controller/Kconfig | 456 ++++++++++++++++-----------------
 1 file changed, 228 insertions(+), 228 deletions(-)
drivers/pci/controller/Kconfig +228 -228
index 7690cc7bbd3f..c52ca0c9550d 100644
@@ -3,19 +3,6 @@
 menu "PCI controller drivers"
 	depends on PCI
 
-config PCI_MVEBU
-	tristate "Marvell EBU PCIe controller"
-	depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST
-	depends on MVEBU_MBUS
-	depends on ARM
-	depends on OF
-	depends on BROKEN
-	select PCI_BRIDGE_EMUL
-	help
-	 Add support for Marvell EBU PCIe controller. This PCIe controller
-	 is used on 32-bit Marvell ARM SoCs: Dove, Kirkwood, Armada 370,
-	 Armada XP, Armada 375, Armada 38x and Armada 39x.
-
 config PCI_AARDVARK
 	tristate "Aardvark PCIe controller"
 	depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST
@@ -27,120 +14,54 @@ config PCI_AARDVARK
 	 controller is part of the South Bridge of the Marvel Armada
 	 3700 SoC.
 
-config PCIE_XILINX_NWL
-	bool "Xilinx NWL PCIe controller"
-	depends on ARCH_ZYNQMP || COMPILE_TEST
+config PCIE_ALTERA
+	tristate "Altera PCIe controller"
+	depends on ARM || NIOS2 || ARM64 || COMPILE_TEST
+	help
+	  Say Y here if you want to enable PCIe controller support on Altera
+	  FPGA.
+
+config PCIE_ALTERA_MSI
+	tristate "Altera PCIe MSI feature"
+	depends on PCIE_ALTERA
 	depends on PCI_MSI
 	help
-	 Say 'Y' here if you want kernel support for Xilinx
-	 NWL PCIe controller. The controller can act as Root Port
-	 or End Point. The current option selection will only
-	 support root port enabling.
+	  Say Y here if you want PCIe MSI support for the Altera FPGA.
+	  This MSI driver supports Altera MSI to GIC controller IP.
 
-config PCI_FTPCI100
-	bool "Faraday Technology FTPCI100 PCI controller"
+config PCIE_APPLE_MSI_DOORBELL_ADDR
+	hex
+	default 0xfffff000
+	depends on PCIE_APPLE
+
+config PCIE_APPLE
+	tristate "Apple PCIe controller"
+	depends on ARCH_APPLE || COMPILE_TEST
 	depends on OF
-	default ARCH_GEMINI
-
-config PCI_IXP4XX
-	bool "Intel IXP4xx PCI controller"
-	depends on ARM && OF
-	depends on ARCH_IXP4XX || COMPILE_TEST
-	default ARCH_IXP4XX
-	help
-	  Say Y here if you want support for the PCI host controller found
-	  in the Intel IXP4xx XScale-based network processor SoC.
-
-config PCI_TEGRA
-	bool "NVIDIA Tegra PCIe controller"
-	depends on ARCH_TEGRA || COMPILE_TEST
 	depends on PCI_MSI
-	help
-	  Say Y here if you want support for the PCIe host controller found
-	  on NVIDIA Tegra SoCs.
-
-config PCI_RCAR_GEN2
-	bool "Renesas R-Car Gen2 Internal PCI controller"
-	depends on ARCH_RENESAS || COMPILE_TEST
-	depends on ARM
-	help
-	  Say Y here if you want internal PCI support on R-Car Gen2 SoC.
-	  There are 3 internal PCI controllers available with a single
-	  built-in EHCI/OHCI host controller present on each one.
-
-config PCIE_RCAR_HOST
-	bool "Renesas R-Car PCIe controller (host mode)"
-	depends on ARCH_RENESAS || COMPILE_TEST
-	depends on PCI_MSI
-	help
-	  Say Y here if you want PCIe controller support on R-Car SoCs in host
-	  mode.
-
-config PCIE_RCAR_EP
-	bool "Renesas R-Car PCIe controller (endpoint mode)"
-	depends on ARCH_RENESAS || COMPILE_TEST
-	depends on PCI_ENDPOINT
-	help
-	  Say Y here if you want PCIe controller support on R-Car SoCs in
-	  endpoint mode.
-
-config PCI_HOST_COMMON
-	tristate
-	select PCI_ECAM
-
-config PCI_HOST_GENERIC
-	tristate "Generic PCI host controller"
-	depends on OF
-	select PCI_HOST_COMMON
-	select IRQ_DOMAIN
-	help
-	  Say Y here if you want to support a simple generic PCI host
-	  controller, such as the one emulated by kvmtool.
-
-config PCIE_XILINX
-	bool "Xilinx AXI PCIe controller"
-	depends on OF || COMPILE_TEST
-	depends on PCI_MSI
-	help
-	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
-	  Host Bridge driver.
-
-config PCIE_XILINX_CPM
-	bool "Xilinx Versal CPM PCI controller"
-	depends on ARCH_ZYNQMP || COMPILE_TEST
 	select PCI_HOST_COMMON
 	help
-	  Say 'Y' here if you want kernel support for the
-	  Xilinx Versal CPM host bridge.
+	  Say Y here if you want to enable PCIe controller support on Apple
+	  system-on-chips, like the Apple M1. This is required for the USB
+	  type-A ports, Ethernet, Wi-Fi, and Bluetooth.
 
-config PCI_XGENE
-	bool "X-Gene PCIe controller"
-	depends on ARM64 || COMPILE_TEST
-	depends on OF || (ACPI && PCI_QUIRKS)
-	help
-	  Say Y here if you want internal PCI support on APM X-Gene SoC.
-	  There are 5 internal PCIe ports available. Each port is GEN3 capable
-	  and have varied lanes from x1 to x8.
-
-config PCI_XGENE_MSI
-	bool "X-Gene v1 PCIe MSI feature"
-	depends on PCI_XGENE
-	depends on PCI_MSI
-	default y
-	help
-	  Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
-	  This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC.
-
-config PCI_V3_SEMI
-	bool "V3 Semiconductor PCI controller"
-	depends on OF
-	depends on ARM || COMPILE_TEST
-	default ARCH_INTEGRATOR_AP
+	  If unsure, say Y if you have an Apple Silicon system.
 
 config PCI_VERSATILE
 	bool "ARM Versatile PB PCI controller"
 	depends on ARCH_VERSATILE || COMPILE_TEST
 
+config PCIE_BRCMSTB
+	tristate "Broadcom Brcmstb PCIe controller"
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
+		   BMIPS_GENERIC || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI
+	default ARCH_BRCMSTB || BMIPS_GENERIC
+	help
+	  Say Y here to enable PCIe host controller support for
+	  Broadcom STB based SoCs, like the Raspberry Pi 4.
+
 config PCIE_IPROC
 	tristate
 	help
@@ -177,21 +98,6 @@ config PCIE_IPROC_MSI
 	  Say Y here if you want to enable MSI support for Broadcom's iProc
 	  PCIe controller
 
-config PCIE_ALTERA
-	tristate "Altera PCIe controller"
-	depends on ARM || NIOS2 || ARM64 || COMPILE_TEST
-	help
-	  Say Y here if you want to enable PCIe controller support on Altera
-	  FPGA.
-
-config PCIE_ALTERA_MSI
-	tristate "Altera PCIe MSI feature"
-	depends on PCIE_ALTERA
-	depends on PCI_MSI
-	help
-	  Say Y here if you want PCIe MSI support for the Altera FPGA.
-	  This MSI driver supports Altera MSI to GIC controller IP.
-
 config PCI_HOST_THUNDER_PEM
 	bool "Cavium Thunder PCIe controller to off-chip devices"
 	depends on ARM64 || COMPILE_TEST
@@ -208,6 +114,157 @@ config PCI_HOST_THUNDER_ECAM
 	help
 	  Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
 
+config PCI_FTPCI100
+	bool "Faraday Technology FTPCI100 PCI controller"
+	depends on OF
+	default ARCH_GEMINI
+
+config PCI_HOST_COMMON
+	tristate
+	select PCI_ECAM
+
+config PCI_HOST_GENERIC
+	tristate "Generic PCI host controller"
+	depends on OF
+	select PCI_HOST_COMMON
+	select IRQ_DOMAIN
+	help
+	  Say Y here if you want to support a simple generic PCI host
+	  controller, such as the one emulated by kvmtool.
+
+config PCIE_HISI_ERR
+	depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST)
+	bool "HiSilicon HIP PCIe controller error handling driver"
+	help
+	  Say Y here if you want error handling support
+	  for the PCIe controller's errors on HiSilicon HIP SoCs
+
+config PCI_IXP4XX
+	bool "Intel IXP4xx PCI controller"
+	depends on ARM && OF
+	depends on ARCH_IXP4XX || COMPILE_TEST
+	default ARCH_IXP4XX
+	help
+	  Say Y here if you want support for the PCI host controller found
+	  in the Intel IXP4xx XScale-based network processor SoC.
+
+config VMD
+	depends on PCI_MSI && X86_64 && !UML
+	tristate "Intel Volume Management Device Driver"
+	help
+	  Adds support for the Intel Volume Management Device (VMD). VMD is a
+	  secondary PCI host bridge that allows PCI Express root ports,
+	  and devices attached to them, to be removed from the default
+	  PCI domain and placed within the VMD domain. This provides
+	  more bus resources than are otherwise possible with a
+	  single domain. If you know your system provides one of these and
+	  has devices attached to it, say Y; if you are not sure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vmd.
+
+config PCI_LOONGSON
+	bool "LOONGSON PCIe controller"
+	depends on MACH_LOONGSON64 || COMPILE_TEST
+	depends on OF || ACPI
+	depends on PCI_QUIRKS
+	default MACH_LOONGSON64
+	help
+	  Say Y here if you want to enable PCI controller support on
+	  Loongson systems.
+
+config PCI_MVEBU
+	tristate "Marvell EBU PCIe controller"
+	depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST
+	depends on MVEBU_MBUS
+	depends on ARM
+	depends on OF
+	depends on BROKEN
+	select PCI_BRIDGE_EMUL
+	help
+	 Add support for Marvell EBU PCIe controller. This PCIe controller
+	 is used on 32-bit Marvell ARM SoCs: Dove, Kirkwood, Armada 370,
+	 Armada XP, Armada 375, Armada 38x and Armada 39x.
+
+config PCIE_MEDIATEK
+	tristate "MediaTek PCIe controller"
+	depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	depends on PCI_MSI
+	help
+	  Say Y here if you want to enable PCIe controller support on
+	  MediaTek SoCs.
+
+config PCIE_MEDIATEK_GEN3
+	tristate "MediaTek Gen3 PCIe controller"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	  Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
+	  This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed,
+	  and support up to 256 MSI interrupt numbers for
+	  multi-function devices.
+
+	  Say Y here if you want to enable Gen3 PCIe controller support on
+	  MediaTek SoCs.
+
+config PCIE_MT7621
+	tristate "MediaTek MT7621 PCIe controller"
+	depends on SOC_MT7621 || COMPILE_TEST
+	select PHY_MT7621_PCI
+	default SOC_MT7621
+	help
+	  This selects a driver for the MediaTek MT7621 PCIe Controller.
+
+config PCIE_MICROCHIP_HOST
+	bool "Microchip AXI PCIe controller"
+	depends on PCI_MSI && OF
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want kernel to support the Microchip AXI PCIe
+	  Host Bridge driver.
+
+config PCI_HYPERV_INTERFACE
+	tristate "Microsoft Hyper-V PCI Interface"
+	depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI
+	help
+	  The Hyper-V PCI Interface is a helper driver that allows other
+	  drivers to have a common interface with the Hyper-V PCI frontend
+	  driver.
+
+config PCI_TEGRA
+	bool "NVIDIA Tegra PCIe controller"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	  Say Y here if you want support for the PCIe host controller found
+	  on NVIDIA Tegra SoCs.
+
+config PCIE_RCAR_HOST
+	bool "Renesas R-Car PCIe controller (host mode)"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on PCI_MSI
+	help
+	  Say Y here if you want PCIe controller support on R-Car SoCs in host
+	  mode.
+
+config PCIE_RCAR_EP
+	bool "Renesas R-Car PCIe controller (endpoint mode)"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	help
+	  Say Y here if you want PCIe controller support on R-Car SoCs in
+	  endpoint mode.
+
+config PCI_RCAR_GEN2
+	bool "Renesas R-Car Gen2 Internal PCI controller"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	depends on ARM
+	help
+	  Say Y here if you want internal PCI support on R-Car Gen2 SoC.
+	  There are 3 internal PCI controllers available with a single
+	  built-in EHCI/OHCI host controller present on each one.
+
 config PCIE_ROCKCHIP
 	bool
 	depends on PCI
@@ -236,114 +293,57 @@ config PCIE_ROCKCHIP_EP
 	  endpoint mode on Rockchip SoC. There is 1 internal PCIe port
 	  available to support GEN2 with 4 slots.
 
-config PCIE_MEDIATEK
-	tristate "MediaTek PCIe controller"
-	depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
+config PCI_V3_SEMI
+	bool "V3 Semiconductor PCI controller"
 	depends on OF
+	depends on ARM || COMPILE_TEST
+	default ARCH_INTEGRATOR_AP
+
+config PCI_XGENE
+	bool "X-Gene PCIe controller"
+	depends on ARM64 || COMPILE_TEST
+	depends on OF || (ACPI && PCI_QUIRKS)
+	help
+	  Say Y here if you want internal PCI support on APM X-Gene SoC.
+	  There are 5 internal PCIe ports available. Each port is GEN3 capable
+	  and have varied lanes from x1 to x8.
+
+config PCI_XGENE_MSI
+	bool "X-Gene v1 PCIe MSI feature"
+	depends on PCI_XGENE
+	depends on PCI_MSI
+	default y
+	help
+	  Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
+	  This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC.
+
+config PCIE_XILINX
+	bool "Xilinx AXI PCIe controller"
+	depends on OF || COMPILE_TEST
 	depends on PCI_MSI
 	help
-	  Say Y here if you want to enable PCIe controller support on
-	  MediaTek SoCs.
-
-config PCIE_MEDIATEK_GEN3
-	tristate "MediaTek Gen3 PCIe controller"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
-	depends on PCI_MSI
-	help
-	  Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
-	  This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed,
-	  and support up to 256 MSI interrupt numbers for
-	  multi-function devices.
-
-	  Say Y here if you want to enable Gen3 PCIe controller support on
-	  MediaTek SoCs.
-
-config VMD
-	depends on PCI_MSI && X86_64 && !UML
-	tristate "Intel Volume Management Device Driver"
-	help
-	  Adds support for the Intel Volume Management Device (VMD). VMD is a
-	  secondary PCI host bridge that allows PCI Express root ports,
-	  and devices attached to them, to be removed from the default
-	  PCI domain and placed within the VMD domain. This provides
-	  more bus resources than are otherwise possible with a
-	  single domain. If you know your system provides one of these and
-	  has devices attached to it, say Y; if you are not sure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vmd.
-
-config PCIE_BRCMSTB
-	tristate "Broadcom Brcmstb PCIe controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \
-		   BMIPS_GENERIC || COMPILE_TEST
-	depends on OF
-	depends on PCI_MSI
-	default ARCH_BRCMSTB || BMIPS_GENERIC
-	help
-	  Say Y here to enable PCIe host controller support for
-	  Broadcom STB based SoCs, like the Raspberry Pi 4.
-
-config PCI_HYPERV_INTERFACE
-	tristate "Microsoft Hyper-V PCI Interface"
-	depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI
-	help
-	  The Hyper-V PCI Interface is a helper driver that allows other
-	  drivers to have a common interface with the Hyper-V PCI frontend
-	  driver.
-
-config PCI_LOONGSON
-	bool "LOONGSON PCIe controller"
-	depends on MACH_LOONGSON64 || COMPILE_TEST
-	depends on OF || ACPI
-	depends on PCI_QUIRKS
-	default MACH_LOONGSON64
-	help
-	  Say Y here if you want to enable PCI controller support on
-	  Loongson systems.
-
-config PCIE_MICROCHIP_HOST
-	bool "Microchip AXI PCIe controller"
-	depends on PCI_MSI && OF
-	select PCI_HOST_COMMON
-	help
-	  Say Y here if you want kernel to support the Microchip AXI PCIe
+	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
 	  Host Bridge driver.
 
-config PCIE_HISI_ERR
-	depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST)
-	bool "HiSilicon HIP PCIe controller error handling driver"
-	help
-	  Say Y here if you want error handling support
-	  for the PCIe controller's errors on HiSilicon HIP SoCs
-
-config PCIE_APPLE_MSI_DOORBELL_ADDR
-	hex
-	default 0xfffff000
-	depends on PCIE_APPLE
-
-config PCIE_APPLE
-	tristate "Apple PCIe controller"
-	depends on ARCH_APPLE || COMPILE_TEST
-	depends on OF
+config PCIE_XILINX_NWL
+	bool "Xilinx NWL PCIe controller"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
 	depends on PCI_MSI
+	help
+	 Say 'Y' here if you want kernel support for Xilinx
+	 NWL PCIe controller. The controller can act as Root Port
+	 or End Point. The current option selection will only
+	 support root port enabling.
+
+config PCIE_XILINX_CPM
+	bool "Xilinx Versal CPM PCI controller"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
 	select PCI_HOST_COMMON
 	help
-	  Say Y here if you want to enable PCIe controller support on Apple
-	  system-on-chips, like the Apple M1. This is required for the USB
-	  type-A ports, Ethernet, Wi-Fi, and Bluetooth.
-
-	  If unsure, say Y if you have an Apple Silicon system.
-
-config PCIE_MT7621
-	tristate "MediaTek MT7621 PCIe controller"
-	depends on SOC_MT7621 || COMPILE_TEST
-	select PHY_MT7621_PCI
-	default SOC_MT7621
-	help
-	  This selects a driver for the MediaTek MT7621 PCIe Controller.
+	  Say 'Y' here if you want kernel support for the
+	  Xilinx Versal CPM host bridge.
 
+source "drivers/pci/controller/cadence/Kconfig"
 source "drivers/pci/controller/dwc/Kconfig"
 source "drivers/pci/controller/mobiveil/Kconfig"
-source "drivers/pci/controller/cadence/Kconfig"
 endmenu
Signature · 1 line
2.25.1
#11 lore raw

PATCH 6/7 PCI: dwc: Sort Kconfig entries by vendor

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig.

---
 drivers/pci/controller/dwc/Kconfig | 406 ++++++++++++++---------------
 1 file changed, 203 insertions(+), 203 deletions(-)
drivers/pci/controller/dwc/Kconfig +203 -203
index 4c44ad9f8f2b..ab96da43e0c2 100644
@@ -14,82 +14,61 @@ config PCIE_DW_EP
 	bool
 	select PCIE_DW
 
-config PCI_DRA7XX
-	tristate
-
-config PCI_DRA7XX_HOST
-	tristate "TI DRA7xx PCIe controller (host mode)"
-	depends on SOC_DRA7XX || COMPILE_TEST
-	depends on OF && HAS_IOMEM && TI_PIPE3
+config PCIE_AL
+	bool "Amazon Annapurna Labs PCIe controller"
+	depends on OF && (ARM64 || COMPILE_TEST)
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select PCI_DRA7XX
-	default y if SOC_DRA7XX
+	select PCI_ECAM
 	help
-	  Enables support for the PCIe controller in the DRA7xx SoC to work in
-	  host mode. There are two instances of PCIe controller in DRA7xx.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCI_DRA7XX_HOST must be selected and in order
-	  to enable device-specific features PCI_DRA7XX_EP must be selected.
-	  This uses the DesignWare core.
+	  Say Y here to enable support of the Amazon's Annapurna Labs PCIe
+	  controller IP on Amazon SoCs. The PCIe controller uses the DesignWare
+	  core plus Annapurna Labs proprietary hardware wrappers. This is
+	  required only for DT-based platforms. ACPI platforms with the
+	  Annapurna Labs PCIe controller don't need to enable this.
 
-config PCI_DRA7XX_EP
-	tristate "TI DRA7xx PCIe controller (endpoint mode)"
-	depends on SOC_DRA7XX || COMPILE_TEST
-	depends on OF && HAS_IOMEM && TI_PIPE3
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	select PCI_DRA7XX
+config PCI_MESON
+	tristate "Amlogic Meson PCIe controller"
+	default m if ARCH_MESON
+	depends on PCI_MSI
+	select PCIE_DW_HOST
 	help
-	  Enables support for the PCIe controller in the DRA7xx SoC to work in
-	  endpoint mode. There are two instances of PCIe controller in DRA7xx.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCI_DRA7XX_HOST must be selected and in order
-	  to enable device-specific features PCI_DRA7XX_EP must be selected.
-	  This uses the DesignWare core.
+	  Say Y here if you want to enable PCI controller support on Amlogic
+	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
+	  and therefore the driver re-uses the DesignWare core functions to
+	  implement the driver.
 
-config PCIE_DW_PLAT
+config PCIE_ARTPEC6
 	bool
 
-config PCIE_DW_PLAT_HOST
-	bool "Platform bus based DesignWare PCIe controller (host mode)"
+config PCIE_ARTPEC6_HOST
+	bool "Axis ARTPEC-6 PCIe controller (host mode)"
+	depends on MACH_ARTPEC6 || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select PCIE_DW_PLAT
+	select PCIE_ARTPEC6
 	help
-	  Enables support for the PCIe controller in the Designware IP to
-	  work in host mode. There are two instances of PCIe controller in
-	  Designware IP.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
-	  order to enable device-specific features PCI_DW_PLAT_EP must be
-	  selected.
+	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
+	  host mode. This uses the DesignWare core.
 
-config PCIE_DW_PLAT_EP
-	bool "Platform bus based DesignWare PCIe controller (endpoint mode)"
-	depends on PCI && PCI_MSI
+config PCIE_ARTPEC6_EP
+	bool "Axis ARTPEC-6 PCIe controller (endpoint mode)"
+	depends on MACH_ARTPEC6 || COMPILE_TEST
 	depends on PCI_ENDPOINT
 	select PCIE_DW_EP
-	select PCIE_DW_PLAT
+	select PCIE_ARTPEC6
 	help
-	  Enables support for the PCIe controller in the Designware IP to
-	  work in endpoint mode. There are two instances of PCIe controller
-	  in Designware IP.
-	  This controller can work either as EP or RC. In order to enable
-	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
-	  order to enable device-specific features PCI_DW_PLAT_EP must be
-	  selected.
+	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
+	  endpoint mode. This uses the DesignWare core.
 
-config PCI_EXYNOS
-	tristate "Samsung Exynos PCIe controller"
-	depends on ARCH_EXYNOS || COMPILE_TEST
+config PCIE_BT1
+	tristate "Baikal-T1 PCIe controller"
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Enables support for the PCIe controller in the Samsung Exynos SoCs
-	  to work in host mode. The PCI controller is based on the DesignWare
-	  hardware and therefore the driver re-uses the DesignWare core
-	  functions to implement the driver.
+	  Enables support for the PCIe controller in the Baikal-T1 SoC to work
+	  in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core.
 
 config PCI_IMX6
 	bool
@@ -118,41 +97,6 @@ config PCI_IMX6_EP
 	  on DesignWare hardware and therefore the driver re-uses the
 	  DesignWare core functions to implement the driver.
 
-config PCIE_SPEAR13XX
-	bool "STMicroelectronics SPEAr PCIe controller"
-	depends on ARCH_SPEAR13XX || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	help
-	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
-
-config PCI_KEYSTONE
-	bool
-
-config PCI_KEYSTONE_HOST
-	bool "TI Keystone PCIe controller (host mode)"
-	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	select PCI_KEYSTONE
-	help
-	  Enables support for the PCIe controller in the Keystone SoC to
-	  work in host mode. The PCI controller on Keystone is based on
-	  DesignWare hardware and therefore the driver re-uses the
-	  DesignWare core functions to implement the driver.
-
-config PCI_KEYSTONE_EP
-	bool "TI Keystone PCIe controller (endpoint mode)"
-	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	select PCI_KEYSTONE
-	help
-	  Enables support for the PCIe controller in the Keystone SoC to
-	  work in endpoint mode. The PCI controller on Keystone is based
-	  on DesignWare hardware and therefore the driver re-uses the
-	  DesignWare core functions to implement the driver.
-
 config PCI_LAYERSCAPE
 	bool "Freescale Layerscape PCIe controller (host mode)"
 	depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
@@ -188,80 +132,23 @@ config PCI_HISI
 	  Say Y here if you want PCIe controller support on HiSilicon
 	  Hip05 and Hip06 SoCs
 
-config PCIE_QCOM
-	bool "Qualcomm PCIe controller (host mode)"
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+config PCIE_KIRIN
+	depends on OF && (ARM64 || COMPILE_TEST)
+	tristate "HiSilicon Kirin PCIe controller"
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select CRC8
+	select REGMAP_MMIO
 	help
-	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
-	  PCIe controller uses the DesignWare core plus Qualcomm-specific
-	  hardware wrappers.
+	  Say Y here if you want PCIe controller support
+	  on HiSilicon Kirin series SoCs.
 
-config PCIE_QCOM_EP
-	tristate "Qualcomm PCIe controller (endpoint mode)"
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	help
-	  Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
-	  to work in endpoint mode. The PCIe controller uses the DesignWare core
-	  plus Qualcomm-specific hardware wrappers.
-
-config PCIE_ARMADA_8K
-	bool "Marvell Armada-8K PCIe controller"
-	depends on ARCH_MVEBU || COMPILE_TEST
+config PCIE_HISI_STB
+	bool "HiSilicon STB PCIe controller"
+	depends on ARCH_HISI || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want to enable PCIe controller support on
-	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
-	  DesignWare hardware and therefore the driver re-uses the
-	  DesignWare core functions to implement the driver.
-
-config PCIE_ARTPEC6
-	bool
-
-config PCIE_ARTPEC6_HOST
-	bool "Axis ARTPEC-6 PCIe controller (host mode)"
-	depends on MACH_ARTPEC6 || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	select PCIE_ARTPEC6
-	help
-	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
-	  host mode. This uses the DesignWare core.
-
-config PCIE_ARTPEC6_EP
-	bool "Axis ARTPEC-6 PCIe controller (endpoint mode)"
-	depends on MACH_ARTPEC6 || COMPILE_TEST
-	depends on PCI_ENDPOINT
-	select PCIE_DW_EP
-	select PCIE_ARTPEC6
-	help
-	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
-	  endpoint mode. This uses the DesignWare core.
-
-config PCIE_BT1
-	tristate "Baikal-T1 PCIe controller"
-	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	help
-	  Enables support for the PCIe controller in the Baikal-T1 SoC to work
-	  in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core.
-
-config PCIE_ROCKCHIP_DW_HOST
-	bool "Rockchip DesignWare PCIe controller"
-	select PCIE_DW
-	select PCIE_DW_HOST
-	depends on PCI_MSI
-	depends on ARCH_ROCKCHIP || COMPILE_TEST
-	depends on OF
-	help
-	  Enables support for the DesignWare PCIe controller in the
-	  Rockchip SoC except RK3399.
+	  Say Y here if you want PCIe controller support on HiSilicon STB SoCs
 
 config PCIE_INTEL_GW
 	bool "Intel Gateway PCIe controller "
@@ -302,34 +189,16 @@ config PCIE_KEEMBAY_EP
 	  The PCIe controller is based on DesignWare Hardware and uses
 	  DesignWare core functions.
 
-config PCIE_KIRIN
-	depends on OF && (ARM64 || COMPILE_TEST)
-	tristate "HiSilicon Kirin PCIe controller"
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	select REGMAP_MMIO
-	help
-	  Say Y here if you want PCIe controller support
-	  on HiSilicon Kirin series SoCs.
-
-config PCIE_HISI_STB
-	bool "HiSilicon STB PCIe controller"
-	depends on ARCH_HISI || COMPILE_TEST
+config PCIE_ARMADA_8K
+	bool "Marvell Armada-8K PCIe controller"
+	depends on ARCH_MVEBU || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want PCIe controller support on HiSilicon STB SoCs
-
-config PCI_MESON
-	tristate "Amlogic Meson PCIe controller"
-	default m if ARCH_MESON
-	depends on PCI_MSI
-	select PCIE_DW_HOST
-	help
-	  Say Y here if you want to enable PCI controller support on Amlogic
-	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
-	  and therefore the driver re-uses the DesignWare core functions to
-	  implement the driver.
+	  Say Y here if you want to enable PCIe controller support on
+	  Armada-8K SoCs. The PCIe controller on Armada-8K is based on
+	  DesignWare hardware and therefore the driver re-uses the
+	  DesignWare core functions to implement the driver.
 
 config PCIE_TEGRA194
 	tristate
@@ -364,14 +233,89 @@ config PCIE_TEGRA194_EP
 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
 	  selected. This uses the DesignWare core.
 
-config PCIE_VISCONTI_HOST
-	bool "Toshiba Visconti PCIe controller"
-	depends on ARCH_VISCONTI || COMPILE_TEST
+config PCIE_DW_PLAT
+	bool
+
+config PCIE_DW_PLAT_HOST
+	bool "Platform bus based DesignWare PCIe controller (host mode)"
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select PCIE_DW_PLAT
+	help
+	  Enables support for the PCIe controller in the Designware IP to
+	  work in host mode. There are two instances of PCIe controller in
+	  Designware IP.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
+	  order to enable device-specific features PCI_DW_PLAT_EP must be
+	  selected.
+
+config PCIE_DW_PLAT_EP
+	bool "Platform bus based DesignWare PCIe controller (endpoint mode)"
+	depends on PCI && PCI_MSI
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCIE_DW_PLAT
+	help
+	  Enables support for the PCIe controller in the Designware IP to
+	  work in endpoint mode. There are two instances of PCIe controller
+	  in Designware IP.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCIE_DW_PLAT_HOST must be selected and in
+	  order to enable device-specific features PCI_DW_PLAT_EP must be
+	  selected.
+
+config PCIE_QCOM
+	bool "Qualcomm PCIe controller (host mode)"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select CRC8
+	help
+	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
+	  PCIe controller uses the DesignWare core plus Qualcomm-specific
+	  hardware wrappers.
+
+config PCIE_QCOM_EP
+	tristate "Qualcomm PCIe controller (endpoint mode)"
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	  Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
+	  to work in endpoint mode. The PCIe controller uses the DesignWare core
+	  plus Qualcomm-specific hardware wrappers.
+
+config PCIE_ROCKCHIP_DW_HOST
+	bool "Rockchip DesignWare PCIe controller"
+	select PCIE_DW
+	select PCIE_DW_HOST
+	depends on PCI_MSI
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on OF
+	help
+	  Enables support for the DesignWare PCIe controller in the
+	  Rockchip SoC except RK3399.
+
+config PCI_EXYNOS
+	tristate "Samsung Exynos PCIe controller"
+	depends on ARCH_EXYNOS || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
-	  This driver supports TMPV7708 SoC.
+	  Enables support for the PCIe controller in the Samsung Exynos SoCs
+	  to work in host mode. The PCI controller is based on the DesignWare
+	  hardware and therefore the driver re-uses the DesignWare core
+	  functions to implement the driver.
+
+config PCIE_FU740
+	bool "SiFive FU740 PCIe controller"
+	depends on PCI_MSI
+	depends on SOC_SIFIVE || COMPILE_TEST
+	select PCIE_DW_HOST
+	help
+	  Say Y here if you want PCIe controller support for the SiFive
+	  FU740.
 
 config PCIE_UNIPHIER
 	bool "Socionext UniPhier PCIe controller (host mode)"
@@ -393,26 +337,82 @@ config PCIE_UNIPHIER_EP
 	  Say Y here if you want PCIe endpoint controller support on
 	  UniPhier SoCs. This driver supports Pro5 SoC.
 
-config PCIE_AL
-	bool "Amazon Annapurna Labs PCIe controller"
-	depends on OF && (ARM64 || COMPILE_TEST)
+config PCIE_SPEAR13XX
+	bool "STMicroelectronics SPEAr PCIe controller"
+	depends on ARCH_SPEAR13XX || COMPILE_TEST
 	depends on PCI_MSI
 	select PCIE_DW_HOST
-	select PCI_ECAM
 	help
-	  Say Y here to enable support of the Amazon's Annapurna Labs PCIe
-	  controller IP on Amazon SoCs. The PCIe controller uses the DesignWare
-	  core plus Annapurna Labs proprietary hardware wrappers. This is
-	  required only for DT-based platforms. ACPI platforms with the
-	  Annapurna Labs PCIe controller don't need to enable this.
+	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
 
-config PCIE_FU740
-	bool "SiFive FU740 PCIe controller"
+config PCI_DRA7XX
+	tristate
+
+config PCI_DRA7XX_HOST
+	tristate "TI DRA7xx PCIe controller (host mode)"
+	depends on SOC_DRA7XX || COMPILE_TEST
+	depends on OF && HAS_IOMEM && TI_PIPE3
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select PCI_DRA7XX
+	default y if SOC_DRA7XX
+	help
+	  Enables support for the PCIe controller in the DRA7xx SoC to work in
+	  host mode. There are two instances of PCIe controller in DRA7xx.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCI_DRA7XX_HOST must be selected and in order
+	  to enable device-specific features PCI_DRA7XX_EP must be selected.
+	  This uses the DesignWare core.
+
+config PCI_DRA7XX_EP
+	tristate "TI DRA7xx PCIe controller (endpoint mode)"
+	depends on SOC_DRA7XX || COMPILE_TEST
+	depends on OF && HAS_IOMEM && TI_PIPE3
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCI_DRA7XX
+	help
+	  Enables support for the PCIe controller in the DRA7xx SoC to work in
+	  endpoint mode. There are two instances of PCIe controller in DRA7xx.
+	  This controller can work either as EP or RC. In order to enable
+	  host-specific features PCI_DRA7XX_HOST must be selected and in order
+	  to enable device-specific features PCI_DRA7XX_EP must be selected.
+	  This uses the DesignWare core.
+
+config PCI_KEYSTONE
+	bool
+
+config PCI_KEYSTONE_HOST
+	bool "TI Keystone PCIe controller (host mode)"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_DW_HOST
+	select PCI_KEYSTONE
+	help
+	  Enables support for the PCIe controller in the Keystone SoC to
+	  work in host mode. The PCI controller on Keystone is based on
+	  DesignWare hardware and therefore the driver re-uses the
+	  DesignWare core functions to implement the driver.
+
+config PCI_KEYSTONE_EP
+	bool "TI Keystone PCIe controller (endpoint mode)"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCI_KEYSTONE
+	help
+	  Enables support for the PCIe controller in the Keystone SoC to
+	  work in endpoint mode. The PCI controller on Keystone is based
+	  on DesignWare hardware and therefore the driver re-uses the
+	  DesignWare core functions to implement the driver.
+
+config PCIE_VISCONTI_HOST
+	bool "Toshiba Visconti PCIe controller"
+	depends on ARCH_VISCONTI || COMPILE_TEST
 	depends on PCI_MSI
-	depends on SOC_SIFIVE || COMPILE_TEST
 	select PCIE_DW_HOST
 	help
-	  Say Y here if you want PCIe controller support for the SiFive
-	  FU740.
+	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
+	  This driver supports TMPV7708 SoC.
 
 endmenu
Signature · 1 line
2.25.1
#12 lore raw

PATCH 7/7 PCI: mobiveil: Sort Kconfig entries by vendor

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig.

---
 drivers/pci/controller/mobiveil/Kconfig | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
drivers/pci/controller/mobiveil/Kconfig +9 -8
index bc9c624cf619..58ce034f701a 100644
@@ -11,6 +11,15 @@ config PCIE_MOBIVEIL_HOST
 	depends on PCI_MSI
 	select PCIE_MOBIVEIL
 
+config PCIE_LAYERSCAPE_GEN4
+	bool "Freescale Layerscape Gen4 PCIe controller"
+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on PCI_MSI
+	select PCIE_MOBIVEIL_HOST
+	help
+	  Say Y here if you want PCIe Gen4 controller support on
+	  Layerscape SoCs.
+
 config PCIE_MOBIVEIL_PLAT
 	bool "Mobiveil AXI PCIe controller"
 	depends on ARCH_ZYNQMP || COMPILE_TEST
@@ -22,12 +31,4 @@ config PCIE_MOBIVEIL_PLAT
 	  Soft IP. It has up to 8 outbound and inbound windows
 	  for address translation and it is a PCIe Gen4 IP.
 
-config PCIE_LAYERSCAPE_GEN4
-	bool "Freescale Layerscape Gen4 PCIe controller"
-	depends on ARCH_LAYERSCAPE || COMPILE_TEST
-	depends on PCI_MSI
-	select PCIE_MOBIVEIL_HOST
-	help
-	  Say Y here if you want PCIe Gen4 controller support on
-	  Layerscape SoCs.
 endmenu
Signature · 1 line
2.25.1
author Applied
#13 lore raw
In reply to Bjorn Helgaas
Quoted 15 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Use vendor name in all native controller Kconfig entries. Use consistent prompt language. Sort entries by vendor name so they appear in alpha order in menuconfig.

Bjorn Helgaas (7):
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: Use consistent controller Kconfig menu entry language
PCI: Sort controller Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: mobiveil: Sort Kconfig entries by vendor

Quoted 5 lines
 drivers/pci/controller/Kconfig          | 463 ++++++++++-----------
 drivers/pci/controller/cadence/Kconfig  |  10 +-
 drivers/pci/controller/dwc/Kconfig      | 518 ++++++++++++------------
 drivers/pci/controller/mobiveil/Kconfig |  19 +-
 4 files changed, 506 insertions(+), 504 deletions(-)

I applied these to pci/controller/kconfig for v6.4.