Skip to contentSkip to conversation

Add MAX14526 MUIC driver

PATCH Superseded Svyatoslav Ryhel 1 participant 2 messages Apr 20, 2023 Char and misc drivers

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add MAX14526 MUIC driver

MAX14526 MUIC is used by LG P880/P895 which are currently in the process of merging.

Unfortunately U-Boot has no extcon driver model so I used a MISC model for now.

MAX14526 is a powerful extcon device which has the ability to accurately determine plugged devices. In this implementation muic can be configured to represent 3 modes: CP-USB/UART and AP-USB. Unfortunately AP-UART was disabled on P880/P895. Additionally the driver configures some stuff required by the charger.

---
Changes from v1:
- used log_* instead of printf
- log messages made simpler
---

Svyatoslav Ryhel (1):
misc: extcon: add MAX14526 MUIC support

 drivers/misc/Kconfig                  |   2 +
 drivers/misc/Makefile                 |   1 +
 drivers/misc/extcon/Kconfig           |   8 ++
 drivers/misc/extcon/Makefile          |   2 +
 drivers/misc/extcon/extcon-max14526.c | 151 ++++++++++++++++++++++++++
 5 files changed, 164 insertions(+)
 create mode 100644 drivers/misc/extcon/Kconfig
 create mode 100644 drivers/misc/extcon/Makefile
 create mode 100644 drivers/misc/extcon/extcon-max14526.c
Signature · 1 line
2.37.2
#1 lore raw

PATCH v2 1/1 misc: extcon: add MAX14526 MUIC support

MAX14526 is a powerful extcon chip which allows detection of various plugs like usb, mhl, uart, headset etc. This version of driver implements support of AP-usb and CP-usb/uart paths.

---
 drivers/misc/Kconfig                  |   2 +
 drivers/misc/Makefile                 |   1 +
 drivers/misc/extcon/Kconfig           |   8 ++
 drivers/misc/extcon/Makefile          |   2 +
 drivers/misc/extcon/extcon-max14526.c | 151 ++++++++++++++++++++++++++
 5 files changed, 164 insertions(+)
 create mode 100644 drivers/misc/extcon/Kconfig
 create mode 100644 drivers/misc/extcon/Makefile
 create mode 100644 drivers/misc/extcon/extcon-max14526.c
drivers/misc/Kconfig +2 -0
index 4e1ae03e9f..1b49f3cf72 100644
@@ -659,4 +659,6 @@ config SL28CPLD
 	  the base driver which provides common access methods for the
 	  sub-drivers.
 
+source "drivers/misc/extcon/Kconfig"
+
 endmenu
drivers/misc/Makefile +1 -0
index 3b792f2a14..6d4fc8ddf9 100644
@@ -87,3 +87,4 @@ obj-$(CONFIG_K3_AVS0) += k3_avs.o
 obj-$(CONFIG_ESM_K3) += k3_esm.o
 obj-$(CONFIG_ESM_PMIC) += esm_pmic.o
 obj-$(CONFIG_SL28CPLD) += sl28cpld.o
+obj-y += extcon/
drivers/misc/extcon/Kconfig new file +8 -0
new file mode 100644
index 0000000000..99c38224f3
@@ -0,0 +1,8 @@
+config EXTCON_MAX14526
+	bool "Maxim MAX14526 EXTCON Support"
+	select DM_I2C
+	select DM_MISC
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Maxim MAX14526. The MAX14526 MUIC is a USB port accessory
+	  detector and switch.
drivers/misc/extcon/Makefile new file +2 -0
new file mode 100644
index 0000000000..f012b688ce
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0+
+obj-$(CONFIG_EXTCON_MAX14526) += extcon-max14526.o
drivers/misc/extcon/extcon-max14526.c new file +151 -0

151 lines not on this page · raw message

Signature · 1 line
2.37.2