Skip to contentSkip to conversation

f2fs: support errors=remount-ro|continue|panic mountoption

PATCH Superseded Chao Yu 2 participants 2 messages Apr 22, 2023

Subsystems (2)

v10 of 11 Superseded Latest is v11 →

lore
Share & tools
lore

Chao Yu

author maintainer
#0 lore raw

PATCH v10 1/1 f2fs: support errors=remount-ro|continue|panic mountoption

This patch supports errors=remount-ro|continue|panic mount option, by default it uses "continue" mode.

---
v10:
- add description of error mode in f2fs.rst
- keep pending node/non-dir pages in remount-ro mode

 Documentation/filesystems/f2fs.rst |  13 +++
 fs/f2fs/checkpoint.c               |   7 +-
 fs/f2fs/data.c                     |   4 +
 fs/f2fs/f2fs.h                     |  20 ++++-
 fs/f2fs/file.c                     |   5 --
 fs/f2fs/gc.c                       |   2 +-
 fs/f2fs/node.c                     |   3 +
 fs/f2fs/super.c                    | 134 ++++++++++++++++++++++++++---
 8 files changed, 164 insertions(+), 24 deletions(-)
Documentation/filesystems/f2fs.rst +13 -0
index c57745375edb..79670e182250 100644
@@ -351,6 +351,19 @@ age_extent_cache	 Enable an age extent cache based on rb-tree. It records
 			 data block update frequency of the extent per inode, in
 			 order to provide better temperature hints for data block
 			 allocation.
+errors=%s		 Specify f2fs behavior on critical errors. This supports modes:
+			 "panic", "continue" and "remount-ro", respectively, trigger
+			 panic immediately, continue without doing anything, and remount
+			 the partition in read-only mode. By default it uses "continue"
+			 mode.
+			 			continue	remount-ro	panic
+			 access ops		normal		noraml		N/A
+			 syscall errors		-EIO		-EROFS		N/A
+			 mount option		rw		ro		N/A
+			 pending dir write	keep		keep		N/A
+			 pending non-dir write	drop		keep		N/A
+			 pending node write	drop		keep		N/A
+			 pending meta write	keep		keep		N/A
 ======================== ============================================================
 
 Debugfs Entries
fs/f2fs/checkpoint.c +2 -5
index 64b3860f50ee..8fd3b7f9fb88 100644
@@ -30,12 +30,9 @@ void f2fs_stop_checkpoint(struct f2fs_sb_info *sbi, bool end_io,
 						unsigned char reason)
 {
 	f2fs_build_fault_attr(sbi, 0, 0);
-	set_ckpt_flags(sbi, CP_ERROR_FLAG);
-	if (!end_io) {
+	if (!end_io)
 		f2fs_flush_merged_writes(sbi);
-
-		f2fs_handle_stop(sbi, reason);
-	}
+	f2fs_handle_critical_error(sbi, reason, end_io);
 }
 
 /*
fs/f2fs/data.c +4 -0
index 7165b1202f53..f26eac327d6e 100644
@@ -2807,6 +2807,10 @@ int f2fs_write_single_data_page(struct page *page, int *submitted,
 		if (S_ISDIR(inode->i_mode) &&
 				!is_sbi_flag_set(sbi, SBI_IS_CLOSE))
 			goto redirty_out;
+
+		/* keep data pages in remount-ro mode */
+		if (F2FS_OPTION(sbi).errors == MOUNT_ERRORS_READONLY)
+			goto redirty_out;
 		goto out;
 	}
 
fs/f2fs/f2fs.h +17 -3
index d211ee89c158..7afc9aef127a 100644
@@ -162,6 +162,7 @@ struct f2fs_mount_info {
 	int fs_mode;			/* fs mode: LFS or ADAPTIVE */
 	int bggc_mode;			/* bggc mode: off, on or sync */
 	int memory_mode;		/* memory mode */
+	int errors;			/* errors parameter */
 	int discard_unit;		/*
 					 * discard command's offset/size should
 					 * be aligned to this unit: block,
@@ -1370,6 +1371,12 @@ enum {
 	MEMORY_MODE_LOW,	/* memory mode for low memry devices */
 };
 
+enum errors_option {
+	MOUNT_ERRORS_READONLY,	/* remount fs ro on errors */
+	MOUNT_ERRORS_CONTINUE,	/* continue on errors */
+	MOUNT_ERRORS_PANIC,	/* panic on errors */
+};
+
 static inline int f2fs_test_bit(unsigned int nr, char *addr);
 static inline void f2fs_set_bit(unsigned int nr, char *addr);
 static inline void f2fs_clear_bit(unsigned int nr, char *addr);
@@ -1721,8 +1728,14 @@ struct f2fs_sb_info {
 
 	struct workqueue_struct *post_read_wq;	/* post read workqueue */
 
-	unsigned char errors[MAX_F2FS_ERRORS];	/* error flags */
-	spinlock_t error_lock;			/* protect errors array */
+	/*
+	 * If we are in irq context, let's update error information into
+	 * on-disk superblock in the work.
+	 */
+	struct work_struct s_error_work;
+	unsigned char errors[MAX_F2FS_ERRORS];		/* error flags */
+	unsigned char stop_reason[MAX_STOP_REASON];	/* stop reason */
+	spinlock_t error_lock;			/* protect errors/stop_reason array */
 	bool error_dirty;			/* errors of sb is dirty */
 
 	struct kmem_cache *inline_xattr_slab;	/* inline xattr entry */
@@ -3541,8 +3554,9 @@ int f2fs_enable_quota_files(struct f2fs_sb_info *sbi, bool rdonly);
 int f2fs_quota_sync(struct super_block *sb, int type);
 loff_t max_file_blocks(struct inode *inode);
 void f2fs_quota_off_umount(struct super_block *sb);
-void f2fs_handle_stop(struct f2fs_sb_info *sbi, unsigned char reason);
 void f2fs_save_errors(struct f2fs_sb_info *sbi, unsigned char flag);
+void f2fs_handle_critical_error(struct f2fs_sb_info *sbi, unsigned char reason,
+							bool irq_context);
 void f2fs_handle_error(struct f2fs_sb_info *sbi, unsigned char error);
 int f2fs_commit_super(struct f2fs_sb_info *sbi, bool recover);
 int f2fs_sync_fs(struct super_block *sb, int sync);
fs/f2fs/file.c +0 -5
index 5ac53d2627d2..9c9c3f660e01 100644
@@ -2225,7 +2225,6 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg)
 				ret = 0;
 				f2fs_stop_checkpoint(sbi, false,
 						STOP_CP_REASON_SHUTDOWN);
-				set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
 				trace_f2fs_shutdown(sbi, in, ret);
 			}
 			return ret;
@@ -2238,7 +2237,6 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg)
 		if (ret)
 			goto out;
 		f2fs_stop_checkpoint(sbi, false, STOP_CP_REASON_SHUTDOWN);
-		set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
 		thaw_bdev(sb->s_bdev);
 		break;
 	case F2FS_GOING_DOWN_METASYNC:
@@ -2247,16 +2245,13 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg)
 		if (ret)
 			goto out;
 		f2fs_stop_checkpoint(sbi, false, STOP_CP_REASON_SHUTDOWN);
-		set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
 		break;
 	case F2FS_GOING_DOWN_NOSYNC:
 		f2fs_stop_checkpoint(sbi, false, STOP_CP_REASON_SHUTDOWN);
-		set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
 		break;
 	case F2FS_GOING_DOWN_METAFLUSH:
 		f2fs_sync_meta_pages(sbi, META, LONG_MAX, FS_META_IO);
 		f2fs_stop_checkpoint(sbi, false, STOP_CP_REASON_SHUTDOWN);
-		set_sbi_flag(sbi, SBI_IS_SHUTDOWN);
 		break;
 	case F2FS_GOING_DOWN_NEED_FSCK:
 		set_sbi_flag(sbi, SBI_NEED_FSCK);
fs/f2fs/gc.c +1 -1
index 61c5f9d26018..d455140322a8 100644
@@ -59,7 +59,7 @@ static int gc_thread_func(void *data)
 		if (gc_th->gc_wake)
 			gc_th->gc_wake = false;
 
-		if (try_to_freeze()) {
+		if (try_to_freeze() || f2fs_readonly(sbi->sb)) {
 			stat_other_skip_bggc_count(sbi);
 			continue;
 		}
fs/f2fs/node.c +3 -0
index bd1dad523796..834c6f099c95 100644
@@ -1596,6 +1596,9 @@ static int __write_node_page(struct page *page, bool atomic, bool *submitted,
 	trace_f2fs_writepage(page, NODE);
 
 	if (unlikely(f2fs_cp_error(sbi))) {
+		/* keep node pages in remount-ro mode */
+		if (F2FS_OPTION(sbi).errors == MOUNT_ERRORS_READONLY)
+			goto redirty_out;
 		ClearPageUptodate(page);
 		dec_page_count(sbi, F2FS_DIRTY_NODES);
 		unlock_page(page);
fs/f2fs/super.c +124 -10

230 lines not on this page · raw message

Signature · 1 line
2.36.1
#1 lore raw
kernel test robot noticed the following build warnings:

Hi Chao,

kernel test robot noticed the following build warnings:

[auto build test WARNING on jaegeuk-f2fs/dev-test]
[also build test WARNING on jaegeuk-f2fs/dev next-20230421] [cannot apply to linus/master v6.3-rc7]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Chao-Yu/f2fs-support-errors-remount-ro-continue-panic-mountoption/20230422-200811
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git dev-test
patch link:    https://lore.kernel.org/r/20230422120754.97345-1-chao%40kernel.org
patch subject: [PATCH v10] f2fs: support errors=remount-ro|continue|panic mountoption
reproduce:
        # https://github.com/intel-lab-lkp/linux/commit/e9d2110ffe178cd6c5499b8f126190d25f2061a0
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Chao-Yu/f2fs-support-errors-remount-ro-continue-panic-mountoption/20230422-200811
        git checkout e9d2110ffe178cd6c5499b8f126190d25f2061a0
        make menuconfig
        # enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS
        make htmldocs

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
| Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

>> Documentation/filesystems/f2fs.rst:359: WARNING: Unexpected indentation.

vim +359 Documentation/filesystems/f2fs.rst

106
107
108 ======================== ============================================================
109 background_gc=%s Turn on/off cleaning operations, namely garbage
110 collection, triggered in background when I/O subsystem is
111 idle. If background_gc=on, it will turn on the garbage
112 collection and if background_gc=off, garbage collection
113 will be turned off. If background_gc=sync, it will turn
114 on synchronous garbage collection running in background.
115 Default value for this option is on. So garbage
116 collection is on by default.
117 gc_merge When background_gc is on, this option can be enabled to
118 let background GC thread to handle foreground GC requests,
119 it can eliminate the sluggish issue caused by slow foreground
120 GC operation when GC is triggered from a process with limited
121 I/O and CPU resources.
122 nogc_merge Disable GC merge feature.
123 disable_roll_forward Disable the roll-forward recovery routine
124 norecovery Disable the roll-forward recovery routine, mounted read-
125 only (i.e., -o ro,disable_roll_forward)
126 discard/nodiscard Enable/disable real-time discard in f2fs, if discard is
127 enabled, f2fs will issue discard/TRIM commands when a
128 segment is cleaned.
129 no_heap Disable heap-style segment allocation which finds free
130 segments for data from the beginning of main area, while
131 for node from the end of main area.
132 nouser_xattr Disable Extended User Attributes. Note: xattr is enabled
133 by default if CONFIG_F2FS_FS_XATTR is selected.
134 noacl Disable POSIX Access Control List. Note: acl is enabled
135 by default if CONFIG_F2FS_FS_POSIX_ACL is selected.
136 active_logs=%u Support configuring the number of active logs. In the
137 current design, f2fs supports only 2, 4, and 6 logs.
138 Default number is 6.
139 disable_ext_identify Disable the extension list configured by mkfs, so f2fs
140 is not aware of cold files such as media files.
141 inline_xattr Enable the inline xattrs feature.
142 noinline_xattr Disable the inline xattrs feature.
143 inline_xattr_size=%u Support configuring inline xattr size, it depends on
144 flexible inline xattr feature.
145 inline_data Enable the inline data feature: Newly created small (<~3.4k)
146 files can be written into inode block.
147 inline_dentry Enable the inline dir feature: data in newly created
148 directory entries can be written into inode block. The
149 space of inode block which is used to store inline
150 dentries is limited to ~3.4k.
151 noinline_dentry Disable the inline dentry feature.
152 flush_merge Merge concurrent cache_flush commands as much as possible
153 to eliminate redundant command issues. If the underlying
154 device handles the cache_flush command relatively slowly,
155 recommend to enable this option.
156 nobarrier This option can be used if underlying storage guarantees
157 its cached data should be written to the novolatile area.
158 If this option is set, no cache_flush commands are issued
159 but f2fs still guarantees the write ordering of all the
160 data writes.
161 barrier If this option is set, cache_flush commands are allowed to be
162 issued.
163 fastboot This option is used when a system wants to reduce mount
164 time as much as possible, even though normal performance
165 can be sacrificed.
166 extent_cache Enable an extent cache based on rb-tree, it can cache
167 as many as extent which map between contiguous logical
168 address and physical address per inode, resulting in
169 increasing the cache hit ratio. Set by default.
170 noextent_cache Disable an extent cache based on rb-tree explicitly, see
171 the above extent_cache mount option.
172 noinline_data Disable the inline data feature, inline data feature is
173 enabled by default.
174 data_flush Enable data flushing before checkpoint in order to
175 persist data of regular and symlink.
176 reserve_root=%d Support configuring reserved space which is used for
177 allocation from a privileged user with specified uid or
178 gid, unit: 4KB, the default limit is 0.2% of user blocks.
179 resuid=%d The user ID which may use the reserved blocks.
180 resgid=%d The group ID which may use the reserved blocks.
181 fault_injection=%d Enable fault injection in all supported types with
182 specified injection rate.
183 fault_type=%d Support configuring fault injection type, should be
184 enabled with fault_injection option, fault type value
185 is shown below, it supports single or combined type.
186
187 =================== ===========
188 Type_Name Type_Value
189 =================== ===========
190 FAULT_KMALLOC 0x000000001
191 FAULT_KVMALLOC 0x000000002
192 FAULT_PAGE_ALLOC 0x000000004

   193				 FAULT_PAGE_GET		  0x000000008
   194				 FAULT_ALLOC_BIO	  0x000000010 (obsolete)
   195				 FAULT_ALLOC_NID	  0x000000020
   196				 FAULT_ORPHAN		  0x000000040
   197				 FAULT_BLOCK		  0x000000080
   198				 FAULT_DIR_DEPTH	  0x000000100
   199				 FAULT_EVICT_INODE	  0x000000200
   200				 FAULT_TRUNCATE		  0x000000400
   201				 FAULT_READ_IO		  0x000000800
   202				 FAULT_CHECKPOINT	  0x000001000
   203				 FAULT_DISCARD		  0x000002000
   204				 FAULT_WRITE_IO		  0x000004000
   205				 FAULT_SLAB_ALLOC	  0x000008000
   206				 FAULT_DQUOT_INIT	  0x000010000
   207				 FAULT_LOCK_OP		  0x000020000
   208				 FAULT_BLKADDR		  0x000040000
   209				 ===================	  ===========
   210	mode=%s			 Control block allocation mode which supports "adaptive"
   211				 and "lfs". In "lfs" mode, there should be no random
   212				 writes towards main area.
   213				 "fragment:segment" and "fragment:block" are newly added here.
   214				 These are developer options for experiments to simulate filesystem
   215				 fragmentation/after-GC situation itself. The developers use these
   216				 modes to understand filesystem fragmentation/after-GC condition well,
   217				 and eventually get some insights to handle them better.
   218				 In "fragment:segment", f2fs allocates a new segment in ramdom
   219				 position. With this, we can simulate the after-GC condition.
   220				 In "fragment:block", we can scatter block allocation with
   221				 "max_fragment_chunk" and "max_fragment_hole" sysfs nodes.
   222				 We added some randomness to both chunk and hole size to make
   223				 it close to realistic IO pattern. So, in this mode, f2fs will allocate
   224				 1..<max_fragment_chunk> blocks in a chunk and make a hole in the
   225				 length of 1..<max_fragment_hole> by turns. With this, the newly
   226				 allocated blocks will be scattered throughout the whole partition.
   227				 Note that "fragment:block" implicitly enables "fragment:segment"
   228				 option for more randomness.
   229				 Please, use these options for your experiments and we strongly
   230				 recommend to re-format the filesystem after using these options.
   231	io_bits=%u		 Set the bit size of write IO requests. It should be set
   232				 with "mode=lfs".
   233	usrquota		 Enable plain user disk quota accounting.
   234	grpquota		 Enable plain group disk quota accounting.
   235	prjquota		 Enable plain project quota accounting.
   236	usrjquota=<file>	 Appoint specified file and type during mount, so that quota
   237	grpjquota=<file>	 information can be properly updated during recovery flow,
   238	prjjquota=<file>	 <quota file>: must be in root directory;
   239	jqfmt=<quota type>	 <quota type>: [vfsold,vfsv0,vfsv1].
   240	offusrjquota		 Turn off user journalled quota.
   241	offgrpjquota		 Turn off group journalled quota.
   242	offprjjquota		 Turn off project journalled quota.
   243	quota			 Enable plain user disk quota accounting.
   244	noquota			 Disable all plain disk quota option.
   245	alloc_mode=%s		 Adjust block allocation policy, which supports "reuse"
   246				 and "default".
   247	fsync_mode=%s		 Control the policy of fsync. Currently supports "posix",
   248				 "strict", and "nobarrier". In "posix" mode, which is
   249				 default, fsync will follow POSIX semantics and does a
   250				 light operation to improve the filesystem performance.
   251				 In "strict" mode, fsync will be heavy and behaves in line
   252				 with xfs, ext4 and btrfs, where xfstest generic/342 will
   253				 pass, but the performance will regress. "nobarrier" is
   254				 based on "posix", but doesn't issue flush command for
   255				 non-atomic files likewise "nobarrier" mount option.
   256	test_dummy_encryption
   257	test_dummy_encryption=%s
   258				 Enable dummy encryption, which provides a fake fscrypt
   259				 context. The fake fscrypt context is used by xfstests.
   260				 The argument may be either "v1" or "v2", in order to
   261				 select the corresponding fscrypt policy version.
   262	checkpoint=%s[:%u[%]]	 Set to "disable" to turn off checkpointing. Set to "enable"
   263				 to reenable checkpointing. Is enabled by default. While
   264				 disabled, any unmounting or unexpected shutdowns will cause
   265				 the filesystem contents to appear as they did when the
   266				 filesystem was mounted with that option.
   267				 While mounting with checkpoint=disable, the filesystem must
   268				 run garbage collection to ensure that all available space can
   269				 be used. If this takes too much time, the mount may return
   270				 EAGAIN. You may optionally add a value to indicate how much
   271				 of the disk you would be willing to temporarily give up to
   272				 avoid additional garbage collection. This can be given as a
   273				 number of blocks, or as a percent. For instance, mounting
   274				 with checkpoint=disable:100% would always succeed, but it may
   275				 hide up to all remaining free space. The actual space that
   276				 would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable
   277				 This space is reclaimed once checkpoint=enable.
   278	checkpoint_merge	 When checkpoint is enabled, this can be used to create a kernel
   279				 daemon and make it to merge concurrent checkpoint requests as
   280				 much as possible to eliminate redundant checkpoint issues. Plus,
   281				 we can eliminate the sluggish issue caused by slow checkpoint
   282				 operation when the checkpoint is done in a process context in
   283				 a cgroup having low i/o budget and cpu shares. To make this
   284				 do better, we set the default i/o priority of the kernel daemon
   285				 to "3", to give one higher priority than other kernel threads.
   286				 This is the same way to give a I/O priority to the jbd2
   287				 journaling thread of ext4 filesystem.
   288	nocheckpoint_merge	 Disable checkpoint merge feature.
   289	compress_algorithm=%s	 Control compress algorithm, currently f2fs supports "lzo",
   290				 "lz4", "zstd" and "lzo-rle" algorithm.
   291	compress_algorithm=%s:%d Control compress algorithm and its compress level, now, only
   292				 "lz4" and "zstd" support compress level config.
   293				 algorithm	level range
   294				 lz4		3 - 16
   295				 zstd		1 - 22
   296	compress_log_size=%u	 Support configuring compress cluster size. The size will
   297				 be 4KB * (1 << %u). The default and minimum sizes are 16KB.
   298	compress_extension=%s	 Support adding specified extension, so that f2fs can enable
   299				 compression on those corresponding files, e.g. if all files
   300				 with '.ext' has high compression rate, we can set the '.ext'
   301				 on compression extension list and enable compression on
   302				 these file by default rather than to enable it via ioctl.
   303				 For other files, we can still enable compression via ioctl.
   304				 Note that, there is one reserved special extension '*', it
   305				 can be set to enable compression for all files.
   306	nocompress_extension=%s	 Support adding specified extension, so that f2fs can disable
   307				 compression on those corresponding files, just contrary to compression extension.
   308				 If you know exactly which files cannot be compressed, you can use this.
   309				 The same extension name can't appear in both compress and nocompress
   310				 extension at the same time.
   311				 If the compress extension specifies all files, the types specified by the
   312				 nocompress extension will be treated as special cases and will not be compressed.
   313				 Don't allow use '*' to specifie all file in nocompress extension.
   314				 After add nocompress_extension, the priority should be:
   315				 dir_flag < comp_extention,nocompress_extension < comp_file_flag,no_comp_file_flag.
   316				 See more in compression sections.
   317	
   318	compress_chksum		 Support verifying chksum of raw data in compressed cluster.
   319	compress_mode=%s	 Control file compression mode. This supports "fs" and "user"
   320				 modes. In "fs" mode (default), f2fs does automatic compression
   321				 on the compression enabled files. In "user" mode, f2fs disables
   322				 the automaic compression and gives the user discretion of
   323				 choosing the target file and the timing. The user can do manual
   324				 compression/decompression on the compression enabled files using
   325				 ioctls.
   326	compress_cache		 Support to use address space of a filesystem managed inode to
   327				 cache compressed block, in order to improve cache hit ratio of
   328				 random read.
   329	inlinecrypt		 When possible, encrypt/decrypt the contents of encrypted
   330				 files using the blk-crypto framework rather than
   331				 filesystem-layer encryption. This allows the use of
   332				 inline encryption hardware. The on-disk format is
   333				 unaffected. For more details, see
   334				 Documentation/block/inline-encryption.rst.
   335	atgc			 Enable age-threshold garbage collection, it provides high
   336				 effectiveness and efficiency on background GC.
   337	discard_unit=%s		 Control discard unit, the argument can be "block", "segment"
   338				 and "section", issued discard command's offset/size will be
   339				 aligned to the unit, by default, "discard_unit=block" is set,
   340				 so that small discard functionality is enabled.
   341				 For blkzoned device, "discard_unit=section" will be set by
   342				 default, it is helpful for large sized SMR or ZNS devices to
   343				 reduce memory cost by getting rid of fs metadata supports small
   344				 discard.
   345	memory=%s		 Control memory mode. This supports "normal" and "low" modes.
   346				 "low" mode is introduced to support low memory devices.
   347				 Because of the nature of low memory devices, in this mode, f2fs
   348				 will try to save memory sometimes by sacrificing performance.
   349				 "normal" mode is the default mode and same as before.
   350	age_extent_cache	 Enable an age extent cache based on rb-tree. It records
   351				 data block update frequency of the extent per inode, in
   352				 order to provide better temperature hints for data block
   353				 allocation.
   354	errors=%s		 Specify f2fs behavior on critical errors. This supports modes:
   355				 "panic", "continue" and "remount-ro", respectively, trigger
   356				 panic immediately, continue without doing anything, and remount
   357				 the partition in read-only mode. By default it uses "continue"
   358				 mode.
 > 359				 			continue	remount-ro	panic

360 access ops normal noraml N/A
361 syscall errors -EIO -EROFS N/A
362 mount option rw ro N/A
363 pending dir write keep keep N/A
364 pending non-dir write drop keep N/A
365 pending node write drop keep N/A
366 pending meta write keep keep N/A
367 ======================== ============================================================
368

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests