Skip to contentSkip to conversation

media: i2c: add ov01a10 image sensor driver

PATCH New [email protected] 1 participant 1 message Apr 23, 2023

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 media: i2c: add ov01a10 image sensor driver

From: Bingbu Cao <[email protected]>

Add v4l2 device driver for OmniVision ov01a10 image sensor, ov01a10 image sensor can deliver 1280x800 resolution BGGR10 images at 60 fps.

---
Changes v2->v3:
- Add support for v4l2 get selection API
- Wrap acpi_device_id table with CONFIG_ACPI

Changes from v1:
- Create ORIENTATION and ROTATION controls if fwnode properties exists
- Move sensor PLL related settings into mipi_data_rate_720mbps[]
- Use v4l2 subdev active state API and remove private mutex
- Add support for vertical and horizontal flip v4l2 control
- Update the copyright header comment format
- Remove some unused macros
- Add entry in MAINTAINERS

---
 MAINTAINERS                 |    7 +
 drivers/media/i2c/Kconfig   |   13 +
 drivers/media/i2c/Makefile  |    1 +
 drivers/media/i2c/ov01a10.c | 1004 +++++++++++++++++++++++++++++++++++
 4 files changed, 1025 insertions(+)
 create mode 100644 drivers/media/i2c/ov01a10.c
MAINTAINERS +7 -0
index 0e64787aace8..84e4e0411d48 100644
@@ -15337,6 +15337,13 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/media/i2c/og01a1b.c
 
+OMNIVISION OV01A10 SENSOR DRIVER
+M:	Bingbu Cao <[email protected]>
+L:	[email protected]
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	drivers/media/i2c/ov01a10.c
+
 OMNIVISION OV02A10 SENSOR DRIVER
 M:	Dongchun Zhu <[email protected]>
 L:	[email protected]
drivers/media/i2c/Kconfig +13 -0
index c3d5952ca27e..e1ff10a40eb3 100644
@@ -365,6 +365,19 @@ config VIDEO_OG01A1B
 	  To compile this driver as a module, choose M here: the
 	  module will be called og01a1b.
 
+config VIDEO_OV01A10
+	tristate "OmniVision OV01A10 sensor support"
+	depends on VIDEO_DEV && I2C
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the OmniVision
+	  OV01A10 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov01a10.
+
 config VIDEO_OV02A10
 	tristate "OmniVision OV02A10 sensor support"
 	depends on VIDEO_DEV && I2C
drivers/media/i2c/Makefile +1 -0
index 4f5e9d9cee85..bde4d7a7198c 100644
@@ -72,6 +72,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
 obj-$(CONFIG_VIDEO_MT9V111) += mt9v111.o
 obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
 obj-$(CONFIG_VIDEO_OG01A1B) += og01a1b.o
+obj-$(CONFIG_VIDEO_OV01A10) += ov01a10.o
 obj-$(CONFIG_VIDEO_OV02A10) += ov02a10.o
 obj-$(CONFIG_VIDEO_OV08D10) += ov08d10.o
 obj-$(CONFIG_VIDEO_OV08X40) += ov08x40.o
drivers/media/i2c/ov01a10.c new file +1004 -0

1,004 lines not on this page · raw message

Signature · 1 line
2.39.1