Update README and examples for ECC key support
v2 cover Update README and examples for ECC key support
Update the README and add example scripts for ECC key and cert support.
Regards,
Stefan
Stefan Berger (2):
Add openssl command line examples for creation of EC keys
examples: Add examples for elliptic curve key and certs generation
README | 24 +++++++++++++++++++++++ examples/ima-gen-local-ca-ecc.sh | 29 ++++++++++++++++++++++++++++ examples/ima-genkey-ecc.sh | 33 ++++++++++++++++++++++++++++++++ examples/ima-genkey-self-ecc.sh | 29 ++++++++++++++++++++++++++++ 4 files changed, 115 insertions(+) create mode 100755 examples/ima-gen-local-ca-ecc.sh create mode 100755 examples/ima-genkey-ecc.sh create mode 100755 examples/ima-genkey-self-ecc.sh
Signature · 1 line
2.39.2
PATCH v2 1/2 Add openssl command line examples for creation of EC keys
Add openssl command line examples for creation of EC keys for EVM and IMA CA and signing key.
--- README | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
README +21 -0
@@ -217,6 +217,18 @@ asymmetric keys support: -x509 -config x509_evm.genkey \ -outform DER -out x509_evm.der -keyout privkey_evm.pem +Create an elliptic curve (EC) key (supported since Linux v5.13) + + openssl ecparam -name prime256v1 -genkey -out privkey_evm.pem + +Generate self-signed x509 EC public key certificate and private key for using +kernel asymmetric key support (supported since Linux v5.13): + + openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \ + -x509 -config x509_evm.genkey \ + -outform DER -out x509_evm.der -keyout privkey_evm.pem \ + -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 + Configuration file x509_evm.genkey: # Beginning of the file
@@ -244,6 +256,9 @@ Generate public key for using RSA key format: openssl rsa -pubout -in privkey_evm.pem -out pubkey_evm.pem +Similarly generate public EC key: + + openssl ec -pubout -in privkey_evm.pem -out pubkey_evm.pem Copy keys to /etc/keys:
@@ -290,6 +305,12 @@ Configuration file ima-local-ca.genkey: # keyUsage = cRLSign, keyCertSign # EOF +Note: To generated elliptic curve keys add the following parameters to + the 'req' commands below (supported since Linux v5.13): + + -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 + + Generate private key and X509 public key certificate: openssl req -new -x509 -utf8 -sha1 -days 3650 -batch -config $GENKEY \
Signature · 1 line
2.39.2
PATCH v2 2/2 examples: Add examples for elliptic curve key and certs generation
In reply to Stefan BergerAdd example scripts for ECC key and certificate creation and reference them from the README.
--- README | 3 +++ examples/ima-gen-local-ca-ecc.sh | 29 ++++++++++++++++++++++++++++ examples/ima-genkey-ecc.sh | 33 ++++++++++++++++++++++++++++++++ examples/ima-genkey-self-ecc.sh | 29 ++++++++++++++++++++++++++++ 4 files changed, 94 insertions(+) create mode 100755 examples/ima-gen-local-ca-ecc.sh create mode 100755 examples/ima-genkey-ecc.sh create mode 100755 examples/ima-genkey-self-ecc.sh
README +3 -0
@@ -469,6 +469,9 @@ Examples of scripts to generate X509 public key certificates: /usr/share/doc/ima-evm-utils/ima-genkey-self.sh /usr/share/doc/ima-evm-utils/ima-genkey.sh /usr/share/doc/ima-evm-utils/ima-gen-local-ca.sh + /usr/share/doc/ima-evm-utils/ima-genkey-self-ecc.sh + /usr/share/doc/ima-evm-utils/ima-genkey-ecc.sh + /usr/share/doc/ima-evm-utils/ima-gen-local-ca-ecc.sh AUTHOR
examples/ima-gen-local-ca-ecc.sh new file +29 -0
@@ -0,0 +1,29 @@ +#!/bin/sh + +GENKEY=ima-local-ca.genkey + +cat << __EOF__ >$GENKEY +[ req ] +distinguished_name = req_distinguished_name +prompt = no +string_mask = utf8only +x509_extensions = v3_ca + +[ req_distinguished_name ] +O = IMA-CA +CN = IMA/EVM certificate signing key +emailAddress = ca@ima-ca + +[ v3_ca ] +basicConstraints=CA:TRUE +subjectKeyIdentifier=hash +authorityKeyIdentifier=keyid:always,issuer +# keyUsage = cRLSign, keyCertSign +__EOF__ + +openssl req -new -x509 -utf8 -sha1 -days 3650 -batch -config $GENKEY \ + -outform DER -out ima-local-ca.x509 -keyout ima-local-ca.priv \ + -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 + +openssl x509 -inform DER -in ima-local-ca.x509 -out ima-local-ca.pem +
examples/ima-genkey-ecc.sh new file +33 -0
@@ -0,0 +1,33 @@ +#!/bin/sh + +GENKEY=ima.genkey + +cat << __EOF__ >$GENKEY +[ req ] +distinguished_name = req_distinguished_name +prompt = no +string_mask = utf8only +x509_extensions = v3_usr + +[ req_distinguished_name ] +O = `hostname` +CN = `whoami` signing key +emailAddress = `whoami`@`hostname` + +[ v3_usr ] +basicConstraints=critical,CA:FALSE +#basicConstraints=CA:FALSE +keyUsage=digitalSignature +#keyUsage = nonRepudiation, digitalSignature, keyEncipherment +subjectKeyIdentifier=hash +authorityKeyIdentifier=keyid +#authorityKeyIdentifier=keyid,issuer +__EOF__ + +openssl req -new -nodes -utf8 -sha1 -days 365 -batch -config $GENKEY \ + -out csr_ima.pem -keyout privkey_ima.pem \ + -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 +openssl x509 -req -in csr_ima.pem -days 365 -extfile $GENKEY -extensions v3_usr \ + -CA ima-local-ca.pem -CAkey ima-local-ca.priv -CAcreateserial \ + -outform DER -out x509_ima.der +
examples/ima-genkey-self-ecc.sh new file +29 -0
@@ -0,0 +1,29 @@ +#!/bin/sh + +GENKEY=x509_evm.genkey + +cat << __EOF__ >$GENKEY +[ req ] +distinguished_name = req_distinguished_name +prompt = no +string_mask = utf8only +x509_extensions = myexts + +[ req_distinguished_name ] +O = `hostname` +CN = `whoami` signing key +emailAddress = `whoami`@`hostname` + +[ myexts ] +basicConstraints=critical,CA:FALSE +keyUsage=digitalSignature +subjectKeyIdentifier=hash +authorityKeyIdentifier=keyid +__EOF__ + +openssl req -x509 -new -nodes -utf8 -sha1 -days 3650 -batch -config $GENKEY \ + -outform DER -out x509_evm.der -keyout privkey_evm.pem \ + -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 + +openssl ec -pubout -in privkey_evm.pem -out pubkey_evm.pem +
Signature · 1 line
2.39.2
Mimi Zohar
maintainerRe: [PATCH ima-evm-utils v2 2/2] examples: Add examples for elliptic curve key and certs generation
hHi Stefan,
Quoted 4 lines · Stefan Berger
Add example scripts for ECC key and certificate creation and reference them from the README.
Signed-off-by Stefan Berger <[email protected]>
Thank you for adding the ECC examples. With Eric Snowberg's "Add CA enforcement keyring restrictions" patch (Linux v6.4) and the proposed IMA changes, the existing scripts in the examples/ directory need to be
updated. Before upstreaming these ECC scripts, let's at least update
them.
From Jarkko's v6.4 pull request
The .machine keyring, used for Machine Owner Keys (MOK), acquired the ability to store only CA enforced keys, and put rest to the .platform keyring, thus separating the code signing keys from the keys that are used to sign certificates. This essentially unlocks the use of the .machine keyring as a trust anchor for IMA. It is an opt-in feature, meaning that the additional contraints won't brick anyone who does not care about them.
Quoted 41 lines
--- README | 3 +++ examples/ima-gen-local-ca-ecc.sh | 29 ++++++++++++++++++++++++++++ examples/ima-genkey-ecc.sh | 33 ++++++++++++++++++++++++++++++++ examples/ima-genkey-self-ecc.sh | 29 ++++++++++++++++++++++++++++ 4 files changed, 94 insertions(+) create mode 100755 examples/ima-gen-local-ca-ecc.sh create mode 100755 examples/ima-genkey-ecc.sh create mode 100755 examples/ima-genkey-self-ecc.shREADME +3
-0@@ -469,6 +469,9 @@ Examples of scripts to generate X509 public key certificates: /usr/share/doc/ima-evm-utils/ima-genkey-self.sh /usr/share/doc/ima-evm-utils/ima-genkey.sh /usr/share/doc/ima-evm-utils/ima-gen-local-ca.sh + /usr/share/doc/ima-evm-utils/ima-genkey-self-ecc.sh + /usr/share/doc/ima-evm-utils/ima-genkey-ecc.sh + /usr/share/doc/ima-evm-utils/ima-gen-local-ca-ecc.sh AUTHORexamples/ima-gen-local-ca-ecc.sh new file +11
-0@@ -0,0 +1,29 @@ +#!/bin/sh + +GENKEY=ima-local-ca.genkey + +cat << __EOF__ >$GENKEY +[ req ] +distinguished_name = req_distinguished_name +prompt = no +string_mask = utf8only +x509_extensions = v3_ca +
examples/ima-gen-local-ca-ecc.sh line 21
Quoted 10 lines
examples/ima-gen-local-ca-ecc.sh new file +10
-0+[ req_distinguished_name ] +O = IMA-CA +CN = IMA/EVM certificate signing key +emailAddress = ca@ima-ca + +[ v3_ca ] +basicConstraints=CA:TRUE +subjectKeyIdentifier=hash +authorityKeyIdentifier=keyid:always,issuer +# keyUsage = cRLSign, keyCertSign
With the INTEGRITY_CA_MACHINE_KEYRING_MAX Kconfig, keyCertSign is required for loading keys onto the .machine keyring. Please uncomment the above line.
examples/ima-gen-local-ca-ecc.sh line 24
Quoted 3 lines
examples/ima-gen-local-ca-ecc.sh new file +3
-0+__EOF + +openssl req -new -x509 -utf8 -sha1 -days 3650 -batch -config $GENKEY \
Please update sha1 to sha256.
Quoted 22 lines
examples/ima-gen-local-ca-ecc.sh new file +5
-0+ -outform DER -out ima-local-ca.x509 -keyout ima-local-ca.priv \ + -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 + +openssl x509 -inform DER -in ima-local-ca.x509 -out ima-local-ca.pem +examples/ima-genkey-ecc.sh new file +11
-0@@ -0,0 +1,33 @@ +#!/bin/sh + +GENKEY=ima.genkey + +cat << __EOF__ >$GENKEY +[ req ] +distinguished_name = req_distinguished_name +prompt = no +string_mask = utf8only +x509_extensions = v3_usr +
examples/ima-genkey-ecc.sh line 21
Quoted 10 lines
examples/ima-genkey-ecc.sh new file +10
-0+[ req_distinguished_name ] +O = `hostname` +CN = `whoami` signing key +emailAddress = `whoami`@`hostname` + +[ v3_usr ] +basicConstraints=critical,CA:FALSE +#basicConstraints=CA:FALSE +keyUsage=digitalSignature +#keyUsage = nonRepudiation, digitalSignature, keyEncipherment
In preparation to allowing only code signing keys on the IMA keyring, please add "extendedKeyUsage=critical,codeSigning",
examples/ima-genkey-ecc.sh line 27
Quoted 6 lines
examples/ima-genkey-ecc.sh new file +6
-0+subjectKeyIdentifier=hash +authorityKeyIdentifier=keyid +#authorityKeyIdentifier=keyid,issuer +__EOF__ + +openssl req -new -nodes -utf8 -sha1 -days 365 -batch -config $GENKEY \
And similarly change sha1 to sha256 here.
Quoted 6 lines
examples/ima-genkey-ecc.sh new file +6
-0+ -out csr_ima.pem -keyout privkey_ima.pem \ + -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 +openssl x509 -req -in csr_ima.pem -days 365 -extfile $GENKEY -extensions v3_usr \ + -CA ima-local-ca.pem -CAkey ima-local-ca.priv -CAcreateserial \ + -outform DER -out x509_ima.der +
Signature · 3 lines
thanks, Mimi
Re: [PATCH ima-evm-utils v2 2/2] examples: Add examples for elliptic curve key and certs generation
Quoted 11 lines · Mimi Zohar
In preparation to allowing only code signing keys on the IMA keyring, please add "extendedKeyUsage=critical,codeSigning",
examples/ima-genkey-ecc.sh line 27
Quoted 6 lines
examples/ima-genkey-ecc.sh new file +6
-0+subjectKeyIdentifier=hash +authorityKeyIdentifier=keyid +#authorityKeyIdentifier=keyid,issuer +__EOF__ + +openssl req -new -nodes -utf8 -sha1 -days 365 -batch -config $GENKEY \And similarly change sha1 to sha256 here.
Should we make all these changes first to the existing scripts for RSA keys?
Mimi Zohar
maintainerRe: [PATCH ima-evm-utils v2 2/2] examples: Add examples for elliptic curve key and certs generation
Quoted 15 lines · Stefan Berger
Quoted 11 lines · Mimi Zohar
In preparation to allowing only code signing keys on the IMA keyring, please add "extendedKeyUsage=critical,codeSigning",
examples/ima-genkey-ecc.sh line 27
Quoted 6 lines
examples/ima-genkey-ecc.sh new file +6
-0+subjectKeyIdentifier=hash +authorityKeyIdentifier=keyid +#authorityKeyIdentifier=keyid,issuer +__EOF__ + +openssl req -new -nodes -utf8 -sha1 -days 365 -batch -config $GENKEY \And similarly change sha1 to sha256 here.
Quoted 1 line
Should we make all these changes first to the existing scripts for RSA keys?
Definitely.
Please also update the "doc_DATA" in Makefile.am to include the new scripts.
Signature · 3 lines
thanks, Mimi