MFD for v6.4

Good afternoon Linus,

The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6:

Linux 6.3-rc1 (2023-03-05 14:52:03 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds.git tags/leds-next-6.4

for you to fetch changes up to 8325642d2757eba80210dec727bb0bcffb837ff1:

leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver (2023-04-27 17:42:33 +0100)

----------------------------------------------------------------
- New Drivers
- Add support for MediaTek MT6370 LED Indicator
- Add support for MediaTek MT6370 Flashlight
- Add support for QCOM PMIC Flash
- Add support for Rohm BD2606MVV Charge Pump LED

- New Device Support
- Add support for PMK8550 PWM to QCOM LPG

- New Functionality
- Add support for high resolution PWM to QCOM LPG

- Fix-ups
- Kconfig 'depends' and 'select' dependency changes
- Remove unused / irrelevant includes
- Remove unnecessary checks (already performed further into the call stack)
- Trivial: Fix commentary, simplify error messages
- Rid 'defined but not used' warnings
- Provide documentation
- Explicitly provide include files

- Bug Fixes
- Mark GPIO LED as BROKEN
- Fix Kconfig entries
- Fix various Smatch staticify reports
- Fix error handling (or a lack there of)

----------------------------------------------------------------
Alexander Dahl (1):
docs: leds: ledtrig-oneshot: Fix spelling mistake

Andreas Kemnade (2):
dt-bindings: leds: Add ROHM BD2606MVV LED
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver

Andy Shevchenko (2):
leds: lp8860: Remove unused of_gpio,h
leds: lp8860: Remove duplicate NULL checks for gpio_desc

Anjelique Melendez (3):
dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM

Bagas Sanjaya (4):
Documentation: leds: Add MT6370 doc to the toctree
Documentation: leds: mt6370: Properly wrap hw_pattern chart
Documentation: leds: MT6370: Use bullet lists for timing variables
MAINTAINERS: Add entry for LED devices documentation

ChiYuan Huang (4):
leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
leds: flash: mt6370: Add MediaTek MT6370 flashlight support
docs: leds: Add MT6370 RGB LED pattern document
leds: rgb: mt6370: Fix implicit declaration for FIELD_GET

Christophe JAILLET (1):
leds: pwm-multicolor: Simplify an error message

Fenglin Wu (2):
leds: flash: Add driver to support flash LED module in QCOM PMICs
dt-bindings: leds: Add QCOM flash LED controller

H. Nikolaus Schaller (1):
leds: tca6507: Fix error handling of using fwnode_property_read_string

Krzysztof Kozlowski (1):
leds: tlc591xx: Mark OF related data as maybe unused

Linus Walleij (1):
leds: Mark GPIO LED trigger broken

Luca Weiss (1):
dt-bindings: leds: spmi-flash-led: Add pm6150l compatible

Lukas Bulwahn (1):
leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB

Manivannan Sadhasivam (1):
dt-bindings: leds: Document commonly used LED triggers

Rafał Miłecki (1):
dt-bindings: leds: Add "usbport" trigger

Randy Dunlap (1):
leds: TI_LMU_COMMON: select REGMAP instead of depending on it

Thomas Weißschuh (1):
leds: Fix reference to led_set_brightness() in doc

Tom Rix (1):
leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static

Wadim Egorov (1):
dt-bindings: leds: Convert PCA9532 to dtschema

 Documentation/devicetree/bindings/leds/common.yaml |   35 +-
 .../devicetree/bindings/leds/leds-pca9532.txt      |   49 -
 .../devicetree/bindings/leds/leds-qcom-lpg.yaml    |    1 +
 .../devicetree/bindings/leds/nxp,pca953x.yaml      |   90 ++
 .../bindings/leds/qcom,spmi-flash-led.yaml         |  117 +++
 .../devicetree/bindings/leds/rohm,bd2606mvv.yaml   |   81 ++
 Documentation/leds/index.rst                       |    1 +
 Documentation/leds/leds-mt6370-rgb.rst             |   64 ++
 Documentation/leds/ledtrig-oneshot.rst             |    2 +-
 MAINTAINERS                                        |    1 +
 drivers/leds/Kconfig                               |   16 +-
 drivers/leds/Makefile                              |    1 +
 drivers/leds/flash/Kconfig                         |   28 +
 drivers/leds/flash/Makefile                        |    2 +
 drivers/leds/flash/leds-mt6370-flash.c             |  573 +++++++++++
 drivers/leds/flash/leds-qcom-flash.c               |  773 +++++++++++++++
 drivers/leds/leds-bd2606mvv.c                      |  160 ++++
 drivers/leds/leds-lp8860.c                         |   10 +-
 drivers/leds/leds-tca6507.c                        |    5 +-
 drivers/leds/leds-tlc591xx.c                       |    2 +-
 drivers/leds/rgb/Kconfig                           |   13 +
 drivers/leds/rgb/Makefile                          |    1 +
 drivers/leds/rgb/leds-mt6370-rgb.c                 | 1011 ++++++++++++++++++++
 drivers/leds/rgb/leds-pwm-multicolor.c             |    4 +-
 drivers/leds/rgb/leds-qcom-lpg.c                   |  160 +++-
 drivers/leds/trigger/Kconfig                       |    1 +
 include/linux/leds.h                               |    2 +-
 27 files changed, 3091 insertions(+), 112 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt
 create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
 create mode 100644 Documentation/leds/leds-mt6370-rgb.rst
 create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
 create mode 100644 drivers/leds/flash/leds-qcom-flash.c
 create mode 100644 drivers/leds/leds-bd2606mvv.c
 create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c

Signature · 1 line

Lee Jones [李琼斯]

Apologies, this is obviously LEDs, not MFD - long day!

Quoted 136 lines

- New Drivers
- Add support for MediaTek MT6370 LED Indicator
- Add support for MediaTek MT6370 Flashlight
- Add support for QCOM PMIC Flash
- Add support for Rohm BD2606MVV Charge Pump LED

- New Device Support
- Add support for PMK8550 PWM to QCOM LPG

- New Functionality
- Add support for high resolution PWM to QCOM LPG

- Fix-ups
- Kconfig 'depends' and 'select' dependency changes
- Remove unused / irrelevant includes
- Remove unnecessary checks (already performed further into the call stack)
- Trivial: Fix commentary, simplify error messages
- Rid 'defined but not used' warnings
- Provide documentation
- Explicitly provide include files

- Bug Fixes
- Mark GPIO LED as BROKEN
- Fix Kconfig entries
- Fix various Smatch staticify reports
- Fix error handling (or a lack there of)

----------------------------------------------------------------
Alexander Dahl (1):
docs: leds: ledtrig-oneshot: Fix spelling mistake

Andreas Kemnade (2):
dt-bindings: leds: Add ROHM BD2606MVV LED
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver

Andy Shevchenko (2):
leds: lp8860: Remove unused of_gpio,h
leds: lp8860: Remove duplicate NULL checks for gpio_desc

Anjelique Melendez (3):
dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM

Bagas Sanjaya (4):
Documentation: leds: Add MT6370 doc to the toctree
Documentation: leds: mt6370: Properly wrap hw_pattern chart
Documentation: leds: MT6370: Use bullet lists for timing variables
MAINTAINERS: Add entry for LED devices documentation

ChiYuan Huang (4):
leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
leds: flash: mt6370: Add MediaTek MT6370 flashlight support
docs: leds: Add MT6370 RGB LED pattern document
leds: rgb: mt6370: Fix implicit declaration for FIELD_GET

Christophe JAILLET (1):
leds: pwm-multicolor: Simplify an error message

Fenglin Wu (2):
leds: flash: Add driver to support flash LED module in QCOM PMICs
dt-bindings: leds: Add QCOM flash LED controller

H. Nikolaus Schaller (1):
leds: tca6507: Fix error handling of using fwnode_property_read_string

Krzysztof Kozlowski (1):
leds: tlc591xx: Mark OF related data as maybe unused

Linus Walleij (1):
leds: Mark GPIO LED trigger broken

Luca Weiss (1):
dt-bindings: leds: spmi-flash-led: Add pm6150l compatible

Lukas Bulwahn (1):
leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB

Manivannan Sadhasivam (1):
dt-bindings: leds: Document commonly used LED triggers

Rafał Miłecki (1):
dt-bindings: leds: Add "usbport" trigger

Randy Dunlap (1):
leds: TI_LMU_COMMON: select REGMAP instead of depending on it

Thomas Weißschuh (1):
leds: Fix reference to led_set_brightness() in doc

Tom Rix (1):
leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static

Wadim Egorov (1):
dt-bindings: leds: Convert PCA9532 to dtschema

 Documentation/devicetree/bindings/leds/common.yaml |   35 +-
 .../devicetree/bindings/leds/leds-pca9532.txt      |   49 -
 .../devicetree/bindings/leds/leds-qcom-lpg.yaml    |    1 +
 .../devicetree/bindings/leds/nxp,pca953x.yaml      |   90 ++
 .../bindings/leds/qcom,spmi-flash-led.yaml         |  117 +++
 .../devicetree/bindings/leds/rohm,bd2606mvv.yaml   |   81 ++
 Documentation/leds/index.rst                       |    1 +
 Documentation/leds/leds-mt6370-rgb.rst             |   64 ++
 Documentation/leds/ledtrig-oneshot.rst             |    2 +-
 MAINTAINERS                                        |    1 +
 drivers/leds/Kconfig                               |   16 +-
 drivers/leds/Makefile                              |    1 +
 drivers/leds/flash/Kconfig                         |   28 +
 drivers/leds/flash/Makefile                        |    2 +
 drivers/leds/flash/leds-mt6370-flash.c             |  573 +++++++++++
 drivers/leds/flash/leds-qcom-flash.c               |  773 +++++++++++++++
 drivers/leds/leds-bd2606mvv.c                      |  160 ++++
 drivers/leds/leds-lp8860.c                         |   10 +-
 drivers/leds/leds-tca6507.c                        |    5 +-
 drivers/leds/leds-tlc591xx.c                       |    2 +-
 drivers/leds/rgb/Kconfig                           |   13 +
 drivers/leds/rgb/Makefile                          |    1 +
 drivers/leds/rgb/leds-mt6370-rgb.c                 | 1011 ++++++++++++++++++++
 drivers/leds/rgb/leds-pwm-multicolor.c             |    4 +-
 drivers/leds/rgb/leds-qcom-lpg.c                   |  160 +++-
 drivers/leds/trigger/Kconfig                       |    1 +
 include/linux/leds.h                               |    2 +-
 27 files changed, 3091 insertions(+), 112 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt
 create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
 create mode 100644 Documentation/leds/leds-mt6370-rgb.rst
 create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
 create mode 100644 drivers/leds/flash/leds-qcom-flash.c
 create mode 100644 drivers/leds/leds-bd2606mvv.c
 create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c

Signature · 1 line

Lee Jones [李琼斯]

Hi!

Quoted 1 line

Apologies, this is obviously LEDs, not MFD - long day!

Thanks for doing this. I guess it may have something to do with the subject, but please keep [email protected] in the cc list.