riscv: dts: starfive: Add PMU controller node
Subsystems (3)
PATCH 1/1 riscv: dts: starfive: Add PMU controller node
Add the pmu controller node for the StarFive JH7110 SoC. The PMU needs to be used by other modules, e.g. VPU,ISP,etc.
Reviewed-by Conor Dooley <[email protected]>
Reviewed-by Hal Feng <[email protected]>
Signed-off-by Walker Chen <[email protected]>
---
This patch is based on:
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/commit/?h=riscv-dt-for-v6.4&id=60bf0a39842eb042bbdc4539285c7e524011fc2d
--- arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/riscv/boot/dts/starfive/jh7110.dtsi +7 -0
@@ -496,5 +496,12 @@ gpio-controller; #gpio-cells = <2>; }; + + pwrc: power-controller@17030000 { + compatible = "starfive,jh7110-pmu"; + reg = <0x0 0x17030000 0x0 0x10000>; + interrupts = <111>; + #power-domain-cells = <1>; + }; }; };
Signature · 1 line
2.17.1
From: Conor Dooley <[email protected]>
Quoted 4 lines · Walker Chen
Add the pmu controller node for the StarFive JH7110 SoC. The PMU needs to be used by other modules, e.g. VPU,ISP,etc.
Applied to riscv-dt-for-next, thanks!
[1/1] riscv: dts: starfive: Add PMU controller node
https://git.kernel.org/conor/c/6a887bcc4138
Thanks,
Conor.