Skip to contentSkip to conversation

6.3.2-rc1 review

PATCH In review Greg Kroah-Hartman 8 participants 705 messages May 8, 2023 – May 28, 2023 Page 5 of 6

Subsystems (6)
lore
Share & tools
lore
author maintainer
#543 lore raw

PATCH 541/694 scripts/gdb: raise error with reduced debugging information

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit 8af055ae25bff48f57227f5e3d48a4306f3dd1c4 ]

If CONFIG_DEBUG_INFO_REDUCED is enabled in the kernel configuration, we will typically not be able to load vmlinux-gdb.py and will fail with:

Traceback (most recent call last):
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/vmlinux-gdb.py", line 25, in <module>
import linux.utils
File "/home/fainelli/work/buildroot/output/arm64/build/linux-custom/scripts/gdb/linux/utils.py", line 131, in <module>
atomic_long_counter_offset = atomic_long_type.get_type()['counter'].bitpos
KeyError: 'counter'

Rather be left wondering what is happening only to find out that reduced debug information is the cause, raise an eror. This was not typically a problem until e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch") but it has since then.

Fixes e3c8d33e0d62 ("scripts/gdb: fix 'lx-dmesg' on 32 bits arch")
Cc Antonio Borneo <[email protected]>
Cc Jan Kiszka <[email protected]>
Cc John Ogness <[email protected]>
Cc Kieran Bingham <[email protected]>
Cc Petr Mladek <[email protected]>
---
 scripts/gdb/linux/constants.py.in | 2 ++
 scripts/gdb/vmlinux-gdb.py        | 5 ++++-
 2 files changed, 6 insertions(+), 1 deletion(-)
scripts/gdb/linux/constants.py.in +2 -0
index 2efbec6b6b8db..08f0587d15ea1 100644
@@ -39,6 +39,8 @@
 
 import gdb
 
+LX_CONFIG(CONFIG_DEBUG_INFO_REDUCED)
+
 /* linux/clk-provider.h */
 if IS_BUILTIN(CONFIG_COMMON_CLK):
     LX_GDBPARSED(CLK_GET_RATE_NOCACHE)
scripts/gdb/vmlinux-gdb.py +4 -1
index 3a5b44cd6bfe4..7e024c051e77f 100644
@@ -22,6 +22,10 @@ except:
     gdb.write("NOTE: gdb 7.2 or later required for Linux helper scripts to "
               "work.\n")
 else:
+    import linux.constants
+    if linux.constants.LX_CONFIG_DEBUG_INFO_REDUCED:
+        raise gdb.GdbError("Reduced debug information will prevent GDB "
+                           "from having complete types.\n")
     import linux.utils
     import linux.symbols
     import linux.modules
@@ -32,7 +36,6 @@ else:
     import linux.lists
     import linux.rbtree
     import linux.proc
-    import linux.constants
     import linux.timerlist
     import linux.clk
     import linux.genpd
Signature · 1 line
2.39.2
author maintainer
#544 lore raw

PATCH 542/694 uapi/linux/const.h: prefer ISO-friendly __typeof__

In reply to Greg Kroah-Hartman

From: Kevin Brodsky <[email protected]>

[ Upstream commit 31088f6f7906253ef4577f6a9b84e2d42447dba0 ]

typeof is (still) a GNU extension, which means that it cannot be used when building ISO C (e.g. -std=c99). It should therefore be avoided in uapi headers in favour of the ISO-friendly __typeof__.

Unfortunately this issue could not be detected by CONFIG_UAPI_HEADER_TEST=y as the __ALIGN_KERNEL() macro is not expanded in any uapi header.

This matters from a userspace perspective, not a kernel one. uapi headers and their contents are expected to be usable in a variety of situations, and in particular when building ISO C applications (with -std=c99 or similar).

This particular problem can be reproduced by trying to use the __ALIGN_KERNEL macro directly in application code, say:

#include <linux/const.h>

int align(int x, int a)

{
	return __KERNEL_ALIGN(x, a);
}

and trying to build that with -std=c99.

Fixes a79ff731a1b2 ("netfilter: xtables: make XT_ALIGN() usable in exported headers by exporting __ALIGN_KERNEL()")
Cc Sam Ravnborg <[email protected]>
---
 include/uapi/linux/const.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/uapi/linux/const.h +1 -1
index af2a44c08683d..a429381e7ca50 100644
@@ -28,7 +28,7 @@
 #define _BITUL(x)	(_UL(1) << (x))
 #define _BITULL(x)	(_ULL(1) << (x))
 
-#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1)
 #define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
 
 #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
Signature · 1 line
2.39.2
author maintainer
#545 lore raw

PATCH 543/694 sh: sq: Fix incorrect element size for allocating bitmap buffer

In reply to Greg Kroah-Hartman

From: John Paul Adrian Glaubitz <[email protected]>

[ Upstream commit 80f746e2bd0e1da3fdb49a53570e54a1a225faac ]

The Store Queue code allocates a bitmap buffer with the size of multiple of sizeof(long) in sq_api_init(). While the buffer size is calculated correctly, the code uses the wrong element size to allocate the buffer which results in the allocated bitmap buffer being too small.

Fix this by allocating the buffer with kcalloc() with element size sizeof(long) instead of kzalloc() whose elements size defaults to sizeof(char).

---
 arch/sh/kernel/cpu/sh4/sq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/sh/kernel/cpu/sh4/sq.c +1 -1
index 27f2e3da5aa22..6e0bb3f47fa5d 100644
@@ -382,7 +382,7 @@ static int __init sq_api_init(void)
 	if (unlikely(!sq_cache))
 		return ret;
 
-	sq_bitmap = kzalloc(size, GFP_KERNEL);
+	sq_bitmap = kcalloc(size, sizeof(long), GFP_KERNEL);
 	if (unlikely(!sq_bitmap))
 		goto out;
 
Signature · 1 line
2.39.2
author maintainer
#546 lore raw

PATCH 544/694 usb: gadget: tegra-xudc: Fix crash in vbus_draw

In reply to Greg Kroah-Hartman

From: Jon Hunter <[email protected]>

[ Upstream commit 5629d31955297ca47b9283c64fff70f2f34aa528 ]

Commit ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support") populated the vbus_draw callback for the Tegra XUDC driver. The function tegra_xudc_gadget_vbus_draw(), that was added by this commit, assumes that the pointer 'curr_usbphy' has been initialised, which is not always the case because this is only initialised when the USB role is updated. Fix this crash, by checking that the 'curr_usbphy' is valid before dereferencing.

Fixes ac82b56bda5f ("usb: gadget: tegra-xudc: Add vbus_draw support")
---
 drivers/usb/gadget/udc/tegra-xudc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/gadget/udc/tegra-xudc.c +1 -1
index 2b71b33725f17..5bccd64847ff7 100644
@@ -2167,7 +2167,7 @@ static int tegra_xudc_gadget_vbus_draw(struct usb_gadget *gadget,
 
 	dev_dbg(xudc->dev, "%s: %u mA\n", __func__, m_a);
 
-	if (xudc->curr_usbphy->chg_type == SDP_TYPE)
+	if (xudc->curr_usbphy && xudc->curr_usbphy->chg_type == SDP_TYPE)
 		ret = usb_phy_set_power(xudc->curr_usbphy, m_a);
 
 	return ret;
Signature · 1 line
2.39.2
author maintainer
#547 lore raw

PATCH 545/694 usb: chipidea: fix missing goto in `ci_hdrc_probe`

In reply to Greg Kroah-Hartman

From: Yinhao Hu <[email protected]>

[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ]

Quoted 1 line

From the comment of ci_usb_phy_init, it returns an error code if

usb_phy_init has failed, and it should do some clean up, not just return directly.

Fix this by goto the error handling.

---
 drivers/usb/chipidea/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/chipidea/core.c +1 -1
index 281fc51720cea..25084ce7c297b 100644
@@ -1108,7 +1108,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	ret = ci_usb_phy_init(ci);
 	if (ret) {
 		dev_err(dev, "unable to init phy: %d\n", ret);
-		return ret;
+		goto ulpi_exit;
 	}
 
 	ci->hw_bank.phys = res->start;
Signature · 1 line
2.39.2
author maintainer
#548 lore raw

PATCH 546/694 usb: mtu3: fix kernel panic at qmu transfer done irq handler

In reply to Greg Kroah-Hartman

From: Chunfeng Yun <[email protected]>

[ Upstream commit d28f4091ea7ec3510fd6a3c6d433234e7a2bef14 ]

When handle qmu transfer irq, it will unlock @mtu->lock before give back request, if another thread handle disconnect event at the same time, and try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before handling it.

e.g.
qmu done irq on cpu0 thread running on cpu1

qmu_done_tx()
handle gpd [0]

    mtu3_requ_complete()        mtu3_gadget_ep_disable()
      unlock @mtu->lock
        give back request         lock @mtu->lock
                                    mtu3_ep_disable()
                                      mtu3_gpd_ring_free()
                                   unlock @mtu->lock
      lock @mtu->lock
    get next gpd [1]

[1]: goto [0] to handle next gpd, and next gpd may be NULL.

Fixes 48e0d3735aa5 ("usb: mtu3: supports new QMU format")
---
 drivers/usb/mtu3/mtu3_qmu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/usb/mtu3/mtu3_qmu.c +3 -2
index a2fdab8b63b28..3b68a0a19cc76 100644
@@ -210,6 +210,7 @@ static struct qmu_gpd *advance_enq_gpd(struct mtu3_gpd_ring *ring)
 	return ring->enqueue;
 }
 
+/* @dequeue may be NULL if ring is unallocated or freed */
 static struct qmu_gpd *advance_deq_gpd(struct mtu3_gpd_ring *ring)
 {
 	if (ring->dequeue < ring->end)
@@ -491,7 +492,7 @@ static void qmu_done_tx(struct mtu3 *mtu, u8 epnum)
 	dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
 		__func__, epnum, gpd, gpd_current, ring->enqueue);
 
-	while (gpd != gpd_current && !GET_GPD_HWO(gpd)) {
+	while (gpd && gpd != gpd_current && !GET_GPD_HWO(gpd)) {
 
 		mreq = next_request(mep);
 
@@ -530,7 +531,7 @@ static void qmu_done_rx(struct mtu3 *mtu, u8 epnum)
 	dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
 		__func__, epnum, gpd, gpd_current, ring->enqueue);
 
-	while (gpd != gpd_current && !GET_GPD_HWO(gpd)) {
+	while (gpd && gpd != gpd_current && !GET_GPD_HWO(gpd)) {
 
 		mreq = next_request(mep);
 
Signature · 1 line
2.39.2
author maintainer
#549 lore raw

PATCH 547/694 firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit e1d6ca042e62c2a69513235f8629eb6e62ca79c5 ]

The svc_create_memory_pool() function returns error pointers. It never returns NULL. Fix the check.

Fixes 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
---
 drivers/firmware/stratix10-svc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/firmware/stratix10-svc.c +2 -2
index bde1f543f5298..80f4e2d14e046 100644
@@ -1133,8 +1133,8 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
 		return ret;
 
 	genpool = svc_create_memory_pool(pdev, sh_memory);
-	if (!genpool)
-		return -ENOMEM;
+	if (IS_ERR(genpool))
+		return PTR_ERR(genpool);
 
 	/* allocate service controller and supporting channel */
 	controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
Signature · 1 line
2.39.2
author maintainer
#550 lore raw

PATCH 548/694 tty: serial: fsl_lpuart: adjust buffer length to the intended size

In reply to Greg Kroah-Hartman

From: Shenwei Wang <[email protected]>

[ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ]

Based on the fls function definition provided below, we should not subtract 1 to obtain the correct buffer length:

fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.

Fixes 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
---
 drivers/tty/serial/fsl_lpuart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/fsl_lpuart.c +1 -1
index 074bfed57fc9e..aef9be3e73c15 100644
@@ -1296,7 +1296,7 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
 	 * 10ms at any baud rate.
 	 */
 	sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud /  bits / 1000) * 2;
-	sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1));
+	sport->rx_dma_rng_buf_len = (1 << fls(sport->rx_dma_rng_buf_len));
 	if (sport->rx_dma_rng_buf_len < 16)
 		sport->rx_dma_rng_buf_len = 16;
 
Signature · 1 line
2.39.2
author maintainer
#551 lore raw

PATCH 549/694 serial: 8250: Add missing wakeup event reporting

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ]

An 8250 UART configured as a wake-up source would not have reported itself through sysfs as being the source of wake-up, correct that.

---
 drivers/tty/serial/8250/8250_port.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/tty/serial/8250/8250_port.c +4 -0
index dfbc501cf9d15..fe8d79c4ae95e 100644
@@ -15,6 +15,7 @@
 #include <linux/moduleparam.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/console.h>
 #include <linux/gpio/consumer.h>
 #include <linux/sysrq.h>
@@ -1932,6 +1933,7 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
+	struct tty_port *tport = &port->state->port;
 	bool skip_rx = false;
 	unsigned long flags;
 	u16 status;
@@ -1957,6 +1959,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 		skip_rx = true;
 
 	if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
+		if (irqd_is_wakeup_set(irq_get_irq_data(port->irq)))
+			pm_wakeup_event(tport->tty->dev, 0);
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
Signature · 1 line
2.39.2
author maintainer
#552 lore raw

PATCH 550/694 spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS

In reply to Greg Kroah-Hartman

From: Dhruva Gole <[email protected]>

[ Upstream commit be3206e8906e7a93df673ab2e96d69304a008edc ]

Using this macro makes the code more readable.
It also inits the members of dev_pm_ops in the following manner without us explicitly needing to:

.suspend = cqspi_suspend, \
.resume = cqspi_resume, \
.freeze = cqspi_suspend, \
.thaw = cqspi_resume, \
.poweroff = cqspi_suspend, \
.restore = cqspi_resume

Also get rid of conditional compilation based on CONFIG_PM_SLEEP because it introduces build issues with certain configs when CQSPI_DEV_PM_OPS is just NULL.

---
 drivers/spi/spi-cadence-quadspi.c |   13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/spi/spi-cadence-quadspi.c +2 -11
@@ -1802,7 +1802,6 @@ static int cqspi_remove(struct platform_
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int cqspi_suspend(struct device *dev)
 {
 	struct cqspi_st *cqspi = dev_get_drvdata(dev);
@@ -1832,15 +1831,7 @@ static int cqspi_resume(struct device *d
 	return spi_master_resume(master);
 }
 
-static const struct dev_pm_ops cqspi__dev_pm_ops = {
-	.suspend = cqspi_suspend,
-	.resume = cqspi_resume,
-};
-
-#define CQSPI_DEV_PM_OPS	(&cqspi__dev_pm_ops)
-#else
-#define CQSPI_DEV_PM_OPS	NULL
-#endif
+static DEFINE_SIMPLE_DEV_PM_OPS(cqspi_dev_pm_ops, cqspi_suspend, cqspi_resume);
 
 static const struct cqspi_driver_platdata cdns_qspi = {
 	.quirks = CQSPI_DISABLE_DAC_MODE,
@@ -1907,7 +1898,7 @@ static struct platform_driver cqspi_plat
 	.remove = cqspi_remove,
 	.driver = {
 		.name = CQSPI_NAME,
-		.pm = CQSPI_DEV_PM_OPS,
+		.pm = &cqspi_dev_pm_ops,
 		.of_match_table = cqspi_dt_ids,
 	},
 };
author maintainer
#553 lore raw

PATCH 551/694 staging: rtl8192e: Fix W_DISABLE# does not work after stop/start

In reply to Greg Kroah-Hartman

From: Philipp Hortmann <[email protected]>

[ Upstream commit 3fac2397f562eb669ddc2f45867a253f3fc26184 ]

When loading the driver for rtl8192e, the W_DISABLE# switch is working as intended. But when the WLAN is turned off in software and then turned on again the W_DISABLE# does not work anymore. Reason for this is that in the function _rtl92e_dm_check_rf_ctrl_gpio() the bfirst_after_down is checked and returned when true. bfirst_after_down is set true when switching the WLAN off in software. But it is not set to false again when WLAN is turned on again.

Add bfirst_after_down = false in _rtl92e_sta_up to reset bit and fix above described bug.

Fixes 94a799425eee ("From: wlanfae <[email protected]> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -0
index 104b16cfa9790..72d76dc7df781 100644
@@ -713,6 +713,7 @@ static int _rtl92e_sta_up(struct net_device *dev, bool is_silent_reset)
 	else
 		netif_wake_queue(dev);
 
+	priv->bfirst_after_down = false;
 	return 0;
 }
 
Signature · 1 line
2.39.2
author maintainer
#554 lore raw

PATCH 552/694 spmi: Add a check for remove callback when removing a SPMI driver

In reply to Greg Kroah-Hartman

From: Jishnu Prakash <[email protected]>

[ Upstream commit b56eef3e16d888883fefab47425036de80dd38fc ]

When removing a SPMI driver, there can be a crash due to NULL pointer dereference if it does not have a remove callback defined. This is one such call trace observed when removing the QCOM SPMI PMIC driver:

 dump_backtrace.cfi_jt+0x0/0x8
 dump_stack_lvl+0xd8/0x16c
 panic+0x188/0x498
 __cfi_slowpath+0x0/0x214
 __cfi_slowpath+0x1dc/0x214
 spmi_drv_remove+0x16c/0x1e0
 device_release_driver_internal+0x468/0x79c
 driver_detach+0x11c/0x1a0
 bus_remove_driver+0xc4/0x124
 driver_unregister+0x58/0x84
 cleanup_module+0x1c/0xc24 [qcom_spmi_pmic]
 __do_sys_delete_module+0x3ec/0x53c
 __arm64_sys_delete_module+0x18/0x28
 el0_svc_common+0xdc/0x294
 el0_svc+0x38/0x9c
 el0_sync_handler+0x8c/0xf0
 el0_sync+0x1b4/0x1c0

If a driver has all its resources allocated through devm_() APIs and does not need any other explicit cleanup, it would not require a remove callback to be defined. Hence, add a check for remove callback presence before calling it when removing a SPMI driver.

Fixes 6f00f8c8635f ("mfd: qcom-spmi-pmic: Use devm_of_platform_populate()")
Fixes 5a86bf343976 ("spmi: Linux driver framework for SPMI")
---
 drivers/spmi/spmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/spmi/spmi.c +2 -1
index 73551531ed437..dbc8585e8d6d0 100644
@@ -350,7 +350,8 @@ static void spmi_drv_remove(struct device *dev)
 	const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
 
 	pm_runtime_get_sync(dev);
-	sdrv->remove(to_spmi_device(dev));
+	if (sdrv->remove)
+		sdrv->remove(to_spmi_device(dev));
 	pm_runtime_put_noidle(dev);
 
 	pm_runtime_disable(dev);
Signature · 1 line
2.39.2
author maintainer
#555 lore raw

PATCH 553/694 vdpa/mlx5: Avoid losing link state updates

In reply to Greg Kroah-Hartman

From: Eli Cohen <[email protected]>

[ Upstream commit c384c2401eed99a2e1f84191e573f15b898babe6 ]

Current code ignores link state updates if VIRTIO_NET_F_STATUS was not negotiated. However, link state updates could be received before feature negotiation was completed , therefore causing link state events to be lost, possibly leaving the link state down.

Modify the code so link state notifier is registered after DRIVER_OK was negotiated and carry the registration only if VIRTIO_NET_F_STATUS was negotiated. Unregister the notifier when the device is reset.

Fixes 033779a708f0 ("vdpa/mlx5: make MTU/STATUS presence conditional on feature bits")

Message-Id: <[email protected]>

---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 203 +++++++++++++++++-------------
 1 file changed, 114 insertions(+), 89 deletions(-)
drivers/vdpa/mlx5/net/mlx5_vnet.c +114 -89
index 195963b82b636..97a16f7eb8941 100644
@@ -2298,6 +2298,113 @@ static void update_cvq_info(struct mlx5_vdpa_dev *mvdev)
 	}
 }
 
+static u8 query_vport_state(struct mlx5_core_dev *mdev, u8 opmod, u16 vport)
+{
+	u32 out[MLX5_ST_SZ_DW(query_vport_state_out)] = {};
+	u32 in[MLX5_ST_SZ_DW(query_vport_state_in)] = {};
+	int err;
+
+	MLX5_SET(query_vport_state_in, in, opcode, MLX5_CMD_OP_QUERY_VPORT_STATE);
+	MLX5_SET(query_vport_state_in, in, op_mod, opmod);
+	MLX5_SET(query_vport_state_in, in, vport_number, vport);
+	if (vport)
+		MLX5_SET(query_vport_state_in, in, other_vport, 1);
+
+	err = mlx5_cmd_exec_inout(mdev, query_vport_state, in, out);
+	if (err)
+		return 0;
+
+	return MLX5_GET(query_vport_state_out, out, state);
+}
+
+static bool get_link_state(struct mlx5_vdpa_dev *mvdev)
+{
+	if (query_vport_state(mvdev->mdev, MLX5_VPORT_STATE_OP_MOD_VNIC_VPORT, 0) ==
+	    VPORT_STATE_UP)
+		return true;
+
+	return false;
+}
+
+static void update_carrier(struct work_struct *work)
+{
+	struct mlx5_vdpa_wq_ent *wqent;
+	struct mlx5_vdpa_dev *mvdev;
+	struct mlx5_vdpa_net *ndev;
+
+	wqent = container_of(work, struct mlx5_vdpa_wq_ent, work);
+	mvdev = wqent->mvdev;
+	ndev = to_mlx5_vdpa_ndev(mvdev);
+	if (get_link_state(mvdev))
+		ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
+	else
+		ndev->config.status &= cpu_to_mlx5vdpa16(mvdev, ~VIRTIO_NET_S_LINK_UP);
+
+	if (ndev->config_cb.callback)
+		ndev->config_cb.callback(ndev->config_cb.private);
+
+	kfree(wqent);
+}
+
+static int queue_link_work(struct mlx5_vdpa_net *ndev)
+{
+	struct mlx5_vdpa_wq_ent *wqent;
+
+	wqent = kzalloc(sizeof(*wqent), GFP_ATOMIC);
+	if (!wqent)
+		return -ENOMEM;
+
+	wqent->mvdev = &ndev->mvdev;
+	INIT_WORK(&wqent->work, update_carrier);
+	queue_work(ndev->mvdev.wq, &wqent->work);
+	return 0;
+}
+
+static int event_handler(struct notifier_block *nb, unsigned long event, void *param)
+{
+	struct mlx5_vdpa_net *ndev = container_of(nb, struct mlx5_vdpa_net, nb);
+	struct mlx5_eqe *eqe = param;
+	int ret = NOTIFY_DONE;
+
+	if (event == MLX5_EVENT_TYPE_PORT_CHANGE) {
+		switch (eqe->sub_type) {
+		case MLX5_PORT_CHANGE_SUBTYPE_DOWN:
+		case MLX5_PORT_CHANGE_SUBTYPE_ACTIVE:
+			if (queue_link_work(ndev))
+				return NOTIFY_DONE;
+
+			ret = NOTIFY_OK;
+			break;
+		default:
+			return NOTIFY_DONE;
+		}
+		return ret;
+	}
+	return ret;
+}
+
+static void register_link_notifier(struct mlx5_vdpa_net *ndev)
+{
+	if (!(ndev->mvdev.actual_features & BIT_ULL(VIRTIO_NET_F_STATUS)))
+		return;
+
+	ndev->nb.notifier_call = event_handler;
+	mlx5_notifier_register(ndev->mvdev.mdev, &ndev->nb);
+	ndev->nb_registered = true;
+	queue_link_work(ndev);
+}
+
+static void unregister_link_notifier(struct mlx5_vdpa_net *ndev)
+{
+	if (!ndev->nb_registered)
+		return;
+
+	ndev->nb_registered = false;
+	mlx5_notifier_unregister(ndev->mvdev.mdev, &ndev->nb);
+	if (ndev->mvdev.wq)
+		flush_workqueue(ndev->mvdev.wq);
+}
+
 static int mlx5_vdpa_set_driver_features(struct vdpa_device *vdev, u64 features)
 {
 	struct mlx5_vdpa_dev *mvdev = to_mvdev(vdev);
@@ -2567,10 +2674,11 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
 				mlx5_vdpa_warn(mvdev, "failed to setup control VQ vring\n");
 				goto err_setup;
 			}
+			register_link_notifier(ndev);
 			err = setup_driver(mvdev);
 			if (err) {
 				mlx5_vdpa_warn(mvdev, "failed to setup driver\n");
-				goto err_setup;
+				goto err_driver;
 			}
 		} else {
 			mlx5_vdpa_warn(mvdev, "did not expect DRIVER_OK to be cleared\n");
@@ -2582,6 +2690,8 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status)
 	up_write(&ndev->reslock);
 	return;
 
+err_driver:
+	unregister_link_notifier(ndev);
 err_setup:
 	mlx5_vdpa_destroy_mr(&ndev->mvdev);
 	ndev->mvdev.status |= VIRTIO_CONFIG_S_FAILED;
@@ -2607,6 +2717,7 @@ static int mlx5_vdpa_reset(struct vdpa_device *vdev)
 	mlx5_vdpa_info(mvdev, "performing device reset\n");
 
 	down_write(&ndev->reslock);
+	unregister_link_notifier(ndev);
 	teardown_driver(ndev);
 	clear_vqs_ready(ndev);
 	mlx5_vdpa_destroy_mr(&ndev->mvdev);
@@ -2861,9 +2972,7 @@ static int mlx5_vdpa_suspend(struct vdpa_device *vdev)
 	mlx5_vdpa_info(mvdev, "suspending device\n");
 
 	down_write(&ndev->reslock);
-	ndev->nb_registered = false;
-	mlx5_notifier_unregister(mvdev->mdev, &ndev->nb);
-	flush_workqueue(ndev->mvdev.wq);
+	unregister_link_notifier(ndev);
 	for (i = 0; i < ndev->cur_num_vqs; i++) {
 		mvq = &ndev->vqs[i];
 		suspend_vq(ndev, mvq);
@@ -3000,84 +3109,6 @@ struct mlx5_vdpa_mgmtdev {
 	struct mlx5_vdpa_net *ndev;
 };
 
-static u8 query_vport_state(struct mlx5_core_dev *mdev, u8 opmod, u16 vport)
-{
-	u32 out[MLX5_ST_SZ_DW(query_vport_state_out)] = {};
-	u32 in[MLX5_ST_SZ_DW(query_vport_state_in)] = {};
-	int err;
-
-	MLX5_SET(query_vport_state_in, in, opcode, MLX5_CMD_OP_QUERY_VPORT_STATE);
-	MLX5_SET(query_vport_state_in, in, op_mod, opmod);
-	MLX5_SET(query_vport_state_in, in, vport_number, vport);
-	if (vport)
-		MLX5_SET(query_vport_state_in, in, other_vport, 1);
-
-	err = mlx5_cmd_exec_inout(mdev, query_vport_state, in, out);
-	if (err)
-		return 0;
-
-	return MLX5_GET(query_vport_state_out, out, state);
-}
-
-static bool get_link_state(struct mlx5_vdpa_dev *mvdev)
-{
-	if (query_vport_state(mvdev->mdev, MLX5_VPORT_STATE_OP_MOD_VNIC_VPORT, 0) ==
-	    VPORT_STATE_UP)
-		return true;
-
-	return false;
-}
-
-static void update_carrier(struct work_struct *work)
-{
-	struct mlx5_vdpa_wq_ent *wqent;
-	struct mlx5_vdpa_dev *mvdev;
-	struct mlx5_vdpa_net *ndev;
-
-	wqent = container_of(work, struct mlx5_vdpa_wq_ent, work);
-	mvdev = wqent->mvdev;
-	ndev = to_mlx5_vdpa_ndev(mvdev);
-	if (get_link_state(mvdev))
-		ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
-	else
-		ndev->config.status &= cpu_to_mlx5vdpa16(mvdev, ~VIRTIO_NET_S_LINK_UP);
-
-	if (ndev->nb_registered && ndev->config_cb.callback)
-		ndev->config_cb.callback(ndev->config_cb.private);
-
-	kfree(wqent);
-}
-
-static int event_handler(struct notifier_block *nb, unsigned long event, void *param)
-{
-	struct mlx5_vdpa_net *ndev = container_of(nb, struct mlx5_vdpa_net, nb);
-	struct mlx5_eqe *eqe = param;
-	int ret = NOTIFY_DONE;
-	struct mlx5_vdpa_wq_ent *wqent;
-
-	if (event == MLX5_EVENT_TYPE_PORT_CHANGE) {
-		if (!(ndev->mvdev.actual_features & BIT_ULL(VIRTIO_NET_F_STATUS)))
-			return NOTIFY_DONE;
-		switch (eqe->sub_type) {
-		case MLX5_PORT_CHANGE_SUBTYPE_DOWN:
-		case MLX5_PORT_CHANGE_SUBTYPE_ACTIVE:
-			wqent = kzalloc(sizeof(*wqent), GFP_ATOMIC);
-			if (!wqent)
-				return NOTIFY_DONE;
-
-			wqent->mvdev = &ndev->mvdev;
-			INIT_WORK(&wqent->work, update_carrier);
-			queue_work(ndev->mvdev.wq, &wqent->work);
-			ret = NOTIFY_OK;
-			break;
-		default:
-			return NOTIFY_DONE;
-		}
-		return ret;
-	}
-	return ret;
-}
-
 static int config_func_mtu(struct mlx5_core_dev *mdev, u16 mtu)
 {
 	int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in);
@@ -3258,9 +3289,6 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
 		goto err_res2;
 	}
 
-	ndev->nb.notifier_call = event_handler;
-	mlx5_notifier_register(mdev, &ndev->nb);
-	ndev->nb_registered = true;
 	mvdev->vdev.mdev = &mgtdev->mgtdev;
 	err = _vdpa_register_device(&mvdev->vdev, max_vqs + 1);
 	if (err)
@@ -3294,10 +3322,7 @@ static void mlx5_vdpa_dev_del(struct vdpa_mgmt_dev *v_mdev, struct vdpa_device *
 
 	mlx5_vdpa_remove_debugfs(ndev->debugfs);
 	ndev->debugfs = NULL;
-	if (ndev->nb_registered) {
-		ndev->nb_registered = false;
-		mlx5_notifier_unregister(mvdev->mdev, &ndev->nb);
-	}
+	unregister_link_notifier(ndev);
 	wq = mvdev->wq;
 	mvdev->wq = NULL;
 	destroy_workqueue(wq);
Signature · 1 line
2.39.2
author maintainer
#556 lore raw

PATCH 554/694 virtio_ring: dont update event idx on get_buf

In reply to Greg Kroah-Hartman

From: Albert Huang <[email protected]>

[ Upstream commit 6c0b057cec5eade4c3afec3908821176931a9997 ]

In virtio_net, if we disable napi_tx, when we trigger a tx interrupt, the vq->event_triggered will be set to true. It is then never reset until we explicitly call virtqueue_enable_cb_delayed or virtqueue_enable_cb_prepare.

If we disable the napi_tx, virtqueue_enable_cb* will only be called when the tx ring is getting relatively empty.

Since event_triggered is true, VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE will not be set. As a result we update vring_used_event(&vq->split.vring) or vq->packed.vring.driver->off_wrap every time we call virtqueue_get_buf_ctx. This causes more interrupts.

To summarize:
1) event_triggered was set to true in vring_interrupt()
2) after this nothing will happen in virtqueue_disable_cb() so VRING_AVAIL_F_NO_INTERRUPT is not set in avail_flags_shadow
3) virtqueue_get_buf_ctx_split() will still think the cb is enabled and then it will publish a new event index

To fix:
update VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE in the vq when we call virtqueue_disable_cb even when event_triggered is true.

Tested with iperf:
iperf3 tcp stream:
vm1 -----------------> vm2
vm2 just receives tcp data stream from vm1, and sends acks to vm1, there are many tx interrupts in vm2.
with the patch applied there are just a few tx interrupts.

v2->v3:
-update the interrupt disable flag even with the event_triggered is set, -instead of checking whether event_triggered is set in -virtqueue_get_buf_ctx_{packed/split}, will cause the drivers which have -not called virtqueue_{enable/disable}_cb to miss notifications.

v3->v4:
-remove change for
-"if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE)" -in virtqueue_disable_cb_packed

Fixes 8d622d21d248 ("virtio: fix up virtio_disable_cb")

Message-Id: <[email protected]>

---
 drivers/virtio/virtio_ring.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
drivers/virtio/virtio_ring.c +16 -6
index 41144b5246a8a..7a78ff05998ad 100644
@@ -854,6 +854,14 @@ static void virtqueue_disable_cb_split(struct virtqueue *_vq)
 
 	if (!(vq->split.avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT)) {
 		vq->split.avail_flags_shadow |= VRING_AVAIL_F_NO_INTERRUPT;
+
+		/*
+		 * If device triggered an event already it won't trigger one again:
+		 * no need to disable.
+		 */
+		if (vq->event_triggered)
+			return;
+
 		if (vq->event)
 			/* TODO: this is a hack. Figure out a cleaner value to write. */
 			vring_used_event(&vq->split.vring) = 0x0;
@@ -1699,6 +1707,14 @@ static void virtqueue_disable_cb_packed(struct virtqueue *_vq)
 
 	if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE) {
 		vq->packed.event_flags_shadow = VRING_PACKED_EVENT_FLAG_DISABLE;
+
+		/*
+		 * If device triggered an event already it won't trigger one again:
+		 * no need to disable.
+		 */
+		if (vq->event_triggered)
+			return;
+
 		vq->packed.vring.driver->flags =
 			cpu_to_le16(vq->packed.event_flags_shadow);
 	}
@@ -2330,12 +2346,6 @@ void virtqueue_disable_cb(struct virtqueue *_vq)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
 
-	/* If device triggered an event already it won't trigger one again:
-	 * no need to disable.
-	 */
-	if (vq->event_triggered)
-		return;
-
 	if (vq->packed_ring)
 		virtqueue_disable_cb_packed(_vq);
 	else
Signature · 1 line
2.39.2
author maintainer
#557 lore raw

PATCH 555/694 spi: bcm63xx: remove PM_SLEEP based conditional compilation

In reply to Greg Kroah-Hartman

From: Dhruva Gole <[email protected]>

[ Upstream commit 25f0617109496e1aff49594fbae5644286447a0f ]

Get rid of conditional compilation based on CONFIG_PM_SLEEP because it may introduce build issues with certain configs where it maybe disabled This is because if above config is not enabled the suspend-resume functions are never part of the code but the bcm63xx_spi_pm_ops struct still inits them to non-existent suspend-resume functions.

Fixes b42dfed83d95 ("spi: add Broadcom BCM63xx SPI controller driver")
---
 drivers/spi/spi-bcm63xx.c | 2 --
 1 file changed, 2 deletions(-)
drivers/spi/spi-bcm63xx.c +0 -2
index 787625ce700cb..d500fcbe2198f 100644
@@ -629,7 +629,6 @@ static int bcm63xx_spi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
 static int bcm63xx_spi_suspend(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
@@ -656,7 +655,6 @@ static int bcm63xx_spi_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(bcm63xx_spi_suspend, bcm63xx_spi_resume)
Signature · 1 line
2.39.2
author maintainer
#558 lore raw

PATCH 556/694 fbdev: mmp: Fix deferred clk handling in mmphw_probe()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit b3a7a9ab65ae2f2626c7222fb79cdd433f8c5252 ]

When dev_err_probe() is called, 'ret' holds the value of the previous successful devm_request_irq() call.
'ret' should be assigned with a meaningful value before being used in dev_err_probe().

While at it, use and return "PTR_ERR(ctrl->clk)" instead of a hard-coded "-ENOENT" so that -EPROBE_DEFER is handled and propagated correctly.

Fixes 81b63420564d ("fbdev: mmp: Make use of the helper function dev_err_probe()")
---
 drivers/video/fbdev/mmp/hw/mmp_ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/fbdev/mmp/hw/mmp_ctrl.c +1 -1
index a9df8ee798102..51fbf02a03430 100644
@@ -514,9 +514,9 @@ static int mmphw_probe(struct platform_device *pdev)
 	/* get clock */
 	ctrl->clk = devm_clk_get(ctrl->dev, mi->clk_name);
 	if (IS_ERR(ctrl->clk)) {
+		ret = PTR_ERR(ctrl->clk);
 		dev_err_probe(ctrl->dev, ret,
 			      "unable to get clk %s\n", mi->clk_name);
-		ret = -ENOENT;
 		goto failed;
 	}
 	clk_prepare_enable(ctrl->clk);
Signature · 1 line
2.39.2
author maintainer
#559 lore raw

PATCH 557/694 selftests/powerpc/pmu: Fix sample field check in the mmcra_thresh_marked_sample_test

In reply to Greg Kroah-Hartman

From: Kajol Jain <[email protected]>

[ Upstream commit 8a32341cf04ba05974931b4664683c2c9fb84e56 ]

The testcase verifies the setting of different fields in Monitor Mode Control Register A (MMCRA). In the current code, EV_CODE_EXTRACT macro is used to extract the "sample" field, which then needs to be further processed to fetch rand_samp_elig and rand_samp_mode bits. But the current code is not passing valid sample field to EV_CODE_EXTRACT macro. Patch addresses this by fixing the input for EV_CODE_EXTRACT.

---
 .../pmu/sampling_tests/mmcra_thresh_marked_sample_test.c      | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
tools/testing/selftests/powerpc/pmu/sampling_tests/mmcra_thresh_marked_sample_test.c +2 -2
index 022cc1655eb52..75527876ad3c1 100644
@@ -63,9 +63,9 @@ static int mmcra_thresh_marked_sample(void)
 			get_mmcra_thd_stop(get_reg_value(intr_regs, "MMCRA"), 4));
 	FAIL_IF(EV_CODE_EXTRACT(event.attr.config, marked) !=
 			get_mmcra_marked(get_reg_value(intr_regs, "MMCRA"), 4));
-	FAIL_IF(EV_CODE_EXTRACT(event.attr.config, sample >> 2) !=
+	FAIL_IF((EV_CODE_EXTRACT(event.attr.config, sample) >> 2) !=
 			get_mmcra_rand_samp_elig(get_reg_value(intr_regs, "MMCRA"), 4));
-	FAIL_IF(EV_CODE_EXTRACT(event.attr.config, sample & 0x3) !=
+	FAIL_IF((EV_CODE_EXTRACT(event.attr.config, sample) & 0x3) !=
 			get_mmcra_sample_mode(get_reg_value(intr_regs, "MMCRA"), 4));
 	FAIL_IF(EV_CODE_EXTRACT(event.attr.config, sm) !=
 			get_mmcra_sm(get_reg_value(intr_regs, "MMCRA"), 4));
Signature · 1 line
2.39.2
author maintainer
#560 lore raw

PATCH 558/694 macintosh/windfarm_smu_sat: Add missing of_node_put()

In reply to Greg Kroah-Hartman

From: Liang He <[email protected]>

[ Upstream commit 631cf002826007ab7415258ee647dcaf8845ad5a ]

We call of_node_get() in wf_sat_probe() after sat is created, so we need the of_node_put() before *kfree(sat)*.

Fixes ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s")
---
 drivers/macintosh/windfarm_smu_sat.c | 1 +
 1 file changed, 1 insertion(+)
drivers/macintosh/windfarm_smu_sat.c +1 -0
index ebc4256a9e4a0..089f2743a070d 100644
@@ -171,6 +171,7 @@ static void wf_sat_release(struct kref *ref)
 
 	if (sat->nr >= 0)
 		sats[sat->nr] = NULL;
+	of_node_put(sat->node);
 	kfree(sat);
 }
 
Signature · 1 line
2.39.2
author maintainer
#561 lore raw

PATCH 559/694 powerpc/perf: Properly detect mpc7450 family

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

[ Upstream commit e7299f961fe5e4496db0bfaa9e819f5e97f3846b ]

Unlike PVR_POWER8, etc ...., PVR_7450 represents a full PVR value and not a family value.

To avoid confusion, do like E500 family and define the relevant PVR_VER_xxxx values for the 7450 family:
0x8000 ==> 7450
0x8001 ==> 7455
0x8002 ==> 7447
0x8003 ==> 7447A
0x8004 ==> 7448

And use them to detect 7450 family for perf events.

---
 arch/powerpc/include/asm/reg.h  | 5 +++++
 arch/powerpc/perf/mpc7450-pmu.c | 6 +++---
 2 files changed, 8 insertions(+), 3 deletions(-)
arch/powerpc/include/asm/reg.h +5 -0
index 1e8b2e04e626a..8fda87af2fa5e 100644
@@ -1310,6 +1310,11 @@
 #define PVR_VER_E500MC	0x8023
 #define PVR_VER_E5500	0x8024
 #define PVR_VER_E6500	0x8040
+#define PVR_VER_7450	0x8000
+#define PVR_VER_7455	0x8001
+#define PVR_VER_7447	0x8002
+#define PVR_VER_7447A	0x8003
+#define PVR_VER_7448	0x8004
 
 /*
  * For the 8xx processors, all of them report the same PVR family for
arch/powerpc/perf/mpc7450-pmu.c +3 -3
index 552d51a925d37..db451b9aac35e 100644
@@ -417,9 +417,9 @@ struct power_pmu mpc7450_pmu = {
 
 static int __init init_mpc7450_pmu(void)
 {
-	unsigned int pvr = mfspr(SPRN_PVR);
-
-	if (PVR_VER(pvr) != PVR_7450)
+	if (!pvr_version_is(PVR_VER_7450) && !pvr_version_is(PVR_VER_7455) &&
+	    !pvr_version_is(PVR_VER_7447) && !pvr_version_is(PVR_VER_7447A) &&
+	    !pvr_version_is(PVR_VER_7448))
 		return -ENODEV;
 
 	return register_power_pmu(&mpc7450_pmu);
Signature · 1 line
2.39.2
author maintainer
#562 lore raw

PATCH 560/694 powerpc/mpc512x: fix resource printk format warning

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 7538c97e2b80ff6b7a8ea2ecf16a04355461b439 ]

Use "%pa" format specifier for resource_size_t to avoid a compiler printk format warning.

../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat':
../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]

  989 |         snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
      |                                            ^~~~~~~~~  ~~~~~~~~~
      |                                                          |
      |                                                          resource_size_t {aka long long unsigned int}

Prevents 24 such warnings.

Fixes 01f25c371658 ("clk: mpc512x: add backwards compat to the CCF code")
---
 arch/powerpc/platforms/512x/clock-commonclk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/platforms/512x/clock-commonclk.c +1 -1
index 42abeba4f6983..079cb3627eacd 100644
@@ -986,7 +986,7 @@ static void __init mpc5121_clk_provide_migration_support(void)
 
 #define NODE_PREP do { \
 	of_address_to_resource(np, 0, &res); \
-	snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \
+	snprintf(devname, sizeof(devname), "%pa.%s", &res.start, np->name); \
 } while (0)
 
 #define NODE_CHK(clkname, clkitem, regnode, regflag) do { \
Signature · 1 line
2.39.2
author maintainer
#563 lore raw

PATCH 561/694 powerpc/wii: fix resource printk format warnings

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 7b69600d4da0049244e9be2f5ef5a2f8e04fcd9a ]

Use "%pa" format specifier for resource_size_t to avoid compiler printk format warnings.

../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info'

  148 |         pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
      |         ^~~~~~~

../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info'

  174 |         pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
      |         ^~~~~~~

../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs':
../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info'

   77 |                 pr_info("%s at 0x%08x mapped to 0x%p\n", name,
      |                 ^~~~~~~
Fixes 028ee972f032 ("powerpc: gamecube/wii: flipper interrupt controller support")
Fixes 9c21025c7845 ("powerpc: wii: hollywood interrupt controller support")
Fixes 5a7ee3198dfa ("powerpc: wii: platform support")
---
 arch/powerpc/platforms/embedded6xx/flipper-pic.c | 2 +-
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c    | 2 +-
 arch/powerpc/platforms/embedded6xx/wii.c         | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/platforms/embedded6xx/flipper-pic.c +1 -1
index 609bda2ad5dd2..4d9200bdba78c 100644
@@ -145,7 +145,7 @@ static struct irq_domain * __init flipper_pic_init(struct device_node *np)
 	}
 	io_base = ioremap(res.start, resource_size(&res));
 
-	pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+	pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base);
 
 	__flipper_quiesce(io_base);
 
arch/powerpc/platforms/embedded6xx/hlwd-pic.c +1 -1
index 380b4285cce47..4d2d92de30afd 100644
@@ -171,7 +171,7 @@ static struct irq_domain *__init hlwd_pic_init(struct device_node *np)
 		return NULL;
 	}
 
-	pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+	pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base);
 
 	__hlwd_quiesce(io_base);
 
arch/powerpc/platforms/embedded6xx/wii.c +2 -2
index f4e654a9d4ff6..219659f2ede06 100644
@@ -74,8 +74,8 @@ static void __iomem *__init wii_ioremap_hw_regs(char *name, char *compatible)
 
 	hw_regs = ioremap(res.start, resource_size(&res));
 	if (hw_regs) {
-		pr_info("%s at 0x%08x mapped to 0x%p\n", name,
-			res.start, hw_regs);
+		pr_info("%s at 0x%pa mapped to 0x%p\n", name,
+			&res.start, hw_regs);
 	}
 
 out_put:
Signature · 1 line
2.39.2
author maintainer
#564 lore raw

PATCH 562/694 powerpc/sysdev/tsi108: fix resource printk format warnings

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 55d8bd02cc1b9f1063993b5c42c9cabf4af67dea ]

Use "%pa" format specifier for resource_size_t to avoid a compiler printk format warning.

arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci':
include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t'

Fixes c4342ff92bed ("[POWERPC] Update mpc7448hpc2 board irq support using device tree")
Fixes 2b9d7467a6db ("[POWERPC] Add tsi108 pci and platform device data register function")
[mpe: Use pr_info() and unsplit string]
---
 arch/powerpc/sysdev/tsi108_pci.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/powerpc/sysdev/tsi108_pci.c +2 -3
index 5af4c35ff5842..0e42f7bad7db1 100644
@@ -217,9 +217,8 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 
 	(hose)->ops = &tsi108_direct_pci_ops;
 
-	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
-	       "Firmware bus number: %d->%d\n",
-	       rsrc.start, hose->first_busno, hose->last_busno);
+	pr_info("Found tsi108 PCI host bridge at 0x%pa. Firmware bus number: %d->%d\n",
+		&rsrc.start, hose->first_busno, hose->last_busno);
 
 	/* Interpret the "ranges" property */
 	/* This also maps the I/O region and sets isa_io/mem_base */
Signature · 1 line
2.39.2
author maintainer
#565 lore raw

PATCH 563/694 macintosh: via-pmu-led: requires ATA to be set

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit 05dce4ba125336875cd3eed3c1503fa81cd2f691 ]

LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK when ATA is not set/enabled causes a Kconfig warning:

WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK
Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n]
Selected by [y]:
- ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y]

Fix this by making ADB_PMU_LED_DISK depend on ATA.

Seen on both PPC32 and PPC64.

Fixes 0e865a80c135 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected")
---
 drivers/macintosh/Kconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/macintosh/Kconfig +1 -0
index 539a2ed4e13dc..a0e717a986dcb 100644
@@ -86,6 +86,7 @@ config ADB_PMU_LED
 
 config ADB_PMU_LED_DISK
 	bool "Use front LED as DISK LED by default"
+	depends on ATA
 	depends on ADB_PMU_LED
 	depends on LEDS_CLASS
 	select LEDS_TRIGGERS
Signature · 1 line
2.39.2
author maintainer
#566 lore raw

PATCH 564/694 powerpc/rtas: use memmove for potentially overlapping buffer copy

In reply to Greg Kroah-Hartman

From: Nathan Lynch <[email protected]>

[ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ]

Using memcpy() isn't safe when buf is identical to rtas_err_buf, which can happen during boot before slab is up. Full context which may not be obvious from the diff:

	if (altbuf) {
		buf = altbuf;
	} else {
		buf = rtas_err_buf;
		if (slab_is_available())
			buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
	}
	if (buf)
		memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);

This was found by inspection and I'm not aware of it causing problems in practice. It appears to have been introduced by commit 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the old ppc64 version of this code did not have this problem.

Use memmove() instead.

Fixes 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel")
---
 arch/powerpc/kernel/rtas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/rtas.c +1 -1
index 31175b34856ac..9256cfaa8b6f1 100644
@@ -981,7 +981,7 @@ static char *__fetch_rtas_last_error(char *altbuf)
 				buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC);
 		}
 		if (buf)
-			memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
+			memmove(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX);
 	}
 
 	return buf;
Signature · 1 line
2.39.2
author maintainer
#567 lore raw

PATCH 565/694 sched/fair: Fix inaccurate tally of ttwu_move_affine

In reply to Greg Kroah-Hartman

From: Libo Chen <[email protected]>

[ Upstream commit 39afe5d6fc59237ff7738bf3ede5a8856822d59d ]

There are scenarios where non-affine wakeups are incorrectly counted as affine wakeups by schedstats.

When wake_affine_idle() returns prev_cpu which doesn't equal to nr_cpumask_bits, it will slip through the check: target == nr_cpumask_bits in wake_affine() and be counted as if target == this_cpu in schedstats.

Replace target == nr_cpumask_bits with target != this_cpu to make sure affine wakeups are accurately tallied.

---
 kernel/sched/fair.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/sched/fair.c +1 -1
index 5f6587d94c1dd..ed89be0aa6503 100644
@@ -6614,7 +6614,7 @@ static int wake_affine(struct sched_domain *sd, struct task_struct *p,
 		target = wake_affine_weight(sd, p, this_cpu, prev_cpu, sync);
 
 	schedstat_inc(p->stats.nr_wakeups_affine_attempts);
-	if (target == nr_cpumask_bits)
+	if (target != this_cpu)
 		return prev_cpu;
 
 	schedstat_inc(sd->ttwu_move_affine);
Signature · 1 line
2.39.2
author maintainer
#568 lore raw

PATCH 566/694 perf/core: Fix hardlockup failure caused by perf throttle

In reply to Greg Kroah-Hartman

From: Yang Jihong <[email protected]>

[ Upstream commit 15def34e2635ab7e0e96f1bc32e1b69609f14942 ]

commit e050e3f0a71bf ("perf: Fix broken interrupt rate throttling") introduces a change in throttling threshold judgment. Before this, compare hwc->interrupts and max_samples_per_tick, then increase hwc->interrupts by 1, but this commit reverses order of these two behaviors, causing the semantics of max_samples_per_tick to change. In literal sense of "max_samples_per_tick", if hwc->interrupts == max_samples_per_tick, it should not be throttled, therefore, the judgment condition should be changed to "hwc->interrupts > max_samples_per_tick".

In fact, this may cause the hardlockup to fail, The minimum value of max_samples_per_tick may be 1, in this case, the return value of __perf_event_account_interrupt function is 1.
As a result, nmi_watchdog gets throttled, which would stop PMU (Use x86 architecture as an example, see x86_pmu_handle_irq).

Fixes e050e3f0a71b ("perf: Fix broken interrupt rate throttling")
---
 kernel/events/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/events/core.c +2 -2
index 435815d3be3f8..68baa8194d9f8 100644
@@ -9433,8 +9433,8 @@ __perf_event_account_interrupt(struct perf_event *event, int throttle)
 		hwc->interrupts = 1;
 	} else {
 		hwc->interrupts++;
-		if (unlikely(throttle
-			     && hwc->interrupts >= max_samples_per_tick)) {
+		if (unlikely(throttle &&
+			     hwc->interrupts > max_samples_per_tick)) {
 			__this_cpu_inc(perf_throttled_count);
 			tick_dep_set_cpu(smp_processor_id(), TICK_DEP_BIT_PERF_EVENTS);
 			hwc->interrupts = MAX_INTERRUPTS;
Signature · 1 line
2.39.2
author maintainer
#569 lore raw

PATCH 567/694 Revert "objtool: Support addition to set CFA base"

In reply to Greg Kroah-Hartman

From: Josh Poimboeuf <[email protected]>

[ Upstream commit e18398e80c73e3cc7d9c3d2e0bc06a4af8f4f1cb ]

Commit 468af56a7bba ("objtool: Support addition to set CFA base") was added as a preparatory patch for arm64 support, but that support never came. It triggers a false positive warning on x86, so just revert it for now.

Fixes the following warning:

vmlinux.o: warning: objtool: cdce925_regmap_i2c_write+0xdb: stack state mismatch: cfa1=4+120 cfa2=5+40

---
 tools/objtool/check.c | 11 -----------
 1 file changed, 11 deletions(-)
tools/objtool/check.c +0 -11
index f937be1afe65c..f62b85832ae01 100644
@@ -2976,17 +2976,6 @@ static int update_cfi_state(struct instruction *insn,
 				break;
 			}
 
-			if (!cfi->drap && op->src.reg == CFI_SP &&
-			    op->dest.reg == CFI_BP && cfa->base == CFI_SP &&
-			    check_reg_frame_pos(&regs[CFI_BP], -cfa->offset + op->src.offset)) {
-
-				/* lea disp(%rsp), %rbp */
-				cfa->base = CFI_BP;
-				cfa->offset -= op->src.offset;
-				cfi->bp_scratch = false;
-				break;
-			}
-
 			if (op->src.reg == CFI_SP && cfa->base == CFI_SP) {
 
 				/* drap: lea disp(%rsp), %drap */
Signature · 1 line
2.39.2
author maintainer
#570 lore raw

PATCH 568/694 riscv: Fix ptdump when KASAN is enabled

In reply to Greg Kroah-Hartman

From: Alexandre Ghiti <[email protected]>

[ Upstream commit ecd7ebaf0b5a094a6180b299a5635c0eea42be4b ]

The KASAN shadow region was moved next to the kernel mapping but the ptdump code was not updated and it appears to break the dump of the kernel page table, so fix this by moving the KASAN shadow region in ptdump.

---
 arch/riscv/mm/ptdump.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
arch/riscv/mm/ptdump.c +12 -12
index 830e7de65e3a3..20a9f991a6d74 100644
@@ -59,10 +59,6 @@ struct ptd_mm_info {
 };
 
 enum address_markers_idx {
-#ifdef CONFIG_KASAN
-	KASAN_SHADOW_START_NR,
-	KASAN_SHADOW_END_NR,
-#endif
 	FIXMAP_START_NR,
 	FIXMAP_END_NR,
 	PCI_IO_START_NR,
@@ -74,6 +70,10 @@ enum address_markers_idx {
 	VMALLOC_START_NR,
 	VMALLOC_END_NR,
 	PAGE_OFFSET_NR,
+#ifdef CONFIG_KASAN
+	KASAN_SHADOW_START_NR,
+	KASAN_SHADOW_END_NR,
+#endif
 #ifdef CONFIG_64BIT
 	MODULES_MAPPING_NR,
 	KERNEL_MAPPING_NR,
@@ -82,10 +82,6 @@ enum address_markers_idx {
 };
 
 static struct addr_marker address_markers[] = {
-#ifdef CONFIG_KASAN
-	{0, "Kasan shadow start"},
-	{0, "Kasan shadow end"},
-#endif
 	{0, "Fixmap start"},
 	{0, "Fixmap end"},
 	{0, "PCI I/O start"},
@@ -97,6 +93,10 @@ static struct addr_marker address_markers[] = {
 	{0, "vmalloc() area"},
 	{0, "vmalloc() end"},
 	{0, "Linear mapping"},
+#ifdef CONFIG_KASAN
+	{0, "Kasan shadow start"},
+	{0, "Kasan shadow end"},
+#endif
 #ifdef CONFIG_64BIT
 	{0, "Modules/BPF mapping"},
 	{0, "Kernel mapping"},
@@ -362,10 +362,6 @@ static int __init ptdump_init(void)
 {
 	unsigned int i, j;
 
-#ifdef CONFIG_KASAN
-	address_markers[KASAN_SHADOW_START_NR].start_address = KASAN_SHADOW_START;
-	address_markers[KASAN_SHADOW_END_NR].start_address = KASAN_SHADOW_END;
-#endif
 	address_markers[FIXMAP_START_NR].start_address = FIXADDR_START;
 	address_markers[FIXMAP_END_NR].start_address = FIXADDR_TOP;
 	address_markers[PCI_IO_START_NR].start_address = PCI_IO_START;
@@ -377,6 +373,10 @@ static int __init ptdump_init(void)
 	address_markers[VMALLOC_START_NR].start_address = VMALLOC_START;
 	address_markers[VMALLOC_END_NR].start_address = VMALLOC_END;
 	address_markers[PAGE_OFFSET_NR].start_address = PAGE_OFFSET;
+#ifdef CONFIG_KASAN
+	address_markers[KASAN_SHADOW_START_NR].start_address = KASAN_SHADOW_START;
+	address_markers[KASAN_SHADOW_END_NR].start_address = KASAN_SHADOW_END;
+#endif
 #ifdef CONFIG_64BIT
 	address_markers[MODULES_MAPPING_NR].start_address = MODULES_VADDR;
 	address_markers[KERNEL_MAPPING_NR].start_address = kernel_map.virt_addr;
Signature · 1 line
2.39.2
author maintainer
#571 lore raw

PATCH 569/694 sched/rt: Fix bad task migration for rt tasks

In reply to Greg Kroah-Hartman

From: Schspa Shi <[email protected]>

[ Upstream commit feffe5bb274dd3442080ef0e4053746091878799 ]

Commit 95158a89dd50 ("sched,rt: Use the full cpumask for balancing") allows find_lock_lowest_rq() to pick a task with migration disabled. The purpose of the commit is to push the current running task on the CPU that has the migrate_disable() task away.

However, there is a race which allows a migrate_disable() task to be migrated. Consider:

CPU0 CPU1
push_rt_task

    check is_migration_disabled(next_task)

                                          task not running and
                                          migration_disabled == 0

    find_lock_lowest_rq(next_task, rq);
      _double_lock_balance(this_rq, busiest);
        raw_spin_rq_unlock(this_rq);
        double_rq_lock(this_rq, busiest);
          <<wait for busiest rq>>
                                              <wakeup>
                                          task become running
                                          migrate_disable();
                                            <context out>
    deactivate_task(rq, next_task, 0);
    set_task_cpu(next_task, lowest_rq->cpu);
      WARN_ON_ONCE(is_migration_disabled(p));
---
 kernel/sched/deadline.c | 1 +
 kernel/sched/rt.c       | 4 ++++
 2 files changed, 5 insertions(+)
kernel/sched/deadline.c +1 -0
index 71b24371a6f77..ac8010f6f3a22 100644
@@ -2246,6 +2246,7 @@ static struct rq *find_lock_later_rq(struct task_struct *task, struct rq *rq)
 				     !cpumask_test_cpu(later_rq->cpu, &task->cpus_mask) ||
 				     task_on_cpu(rq, task) ||
 				     !dl_task(task) ||
+				     is_migration_disabled(task) ||
 				     !task_on_rq_queued(task))) {
 				double_unlock_balance(rq, later_rq);
 				later_rq = NULL;
kernel/sched/rt.c +4 -0
index 0a11f44adee57..4f5796dd26a56 100644
@@ -2000,11 +2000,15 @@ static struct rq *find_lock_lowest_rq(struct task_struct *task, struct rq *rq)
 			 * the mean time, task could have
 			 * migrated already or had its affinity changed.
 			 * Also make sure that it wasn't scheduled on its rq.
+			 * It is possible the task was scheduled, set
+			 * "migrate_disabled" and then got preempted, so we must
+			 * check the task migration disable flag here too.
 			 */
 			if (unlikely(task_rq(task) != rq ||
 				     !cpumask_test_cpu(lowest_rq->cpu, &task->cpus_mask) ||
 				     task_on_cpu(rq, task) ||
 				     !rt_task(task) ||
+				     is_migration_disabled(task) ||
 				     !task_on_rq_queued(task))) {
 
 				double_unlock_balance(rq, lowest_rq);
Signature · 1 line
2.39.2
author maintainer
#572 lore raw

PATCH 570/694 sched/clock: Fix local_clock() before sched_clock_init()

In reply to Greg Kroah-Hartman

From: Aaron Thompson <[email protected]>

[ Upstream commit f31dcb152a3d0816e2f1deab4e64572336da197d ]

Have local_clock() return sched_clock() if sched_clock_init() has not yet run. sched_clock_cpu() has this check but it was not included in the new noinstr implementation of local_clock().

The effect can be seen on x86 with CONFIG_PRINTK_TIME enabled, for instance. scd->clock quickly reaches the value of TICK_NSEC and that value is returned until sched_clock_init() runs.

dmesg without this patch:

    [    0.000000] kvm-clock: ...
    [    0.000002] kvm-clock: ...
    [    0.000672] clocksource: ...
    [    0.001000] tsc: ...
    [    0.001000] e820: ...
    [    0.001000] e820: ...
     ...
    [    0.001000] ..TIMER: ...
    [    0.001000] clocksource: ...
    [    0.378956] Calibrating delay loop ...
    [    0.379955] pid_max: ...

dmesg with this patch:

    [    0.000000] kvm-clock: ...
    [    0.000001] kvm-clock: ...
    [    0.000675] clocksource: ...
    [    0.002685] tsc: ...
    [    0.003331] e820: ...
    [    0.004190] e820: ...
     ...
    [    0.421939] ..TIMER: ...
    [    0.422842] clocksource: ...
    [    0.424582] Calibrating delay loop ...
    [    0.425580] pid_max: ...
Fixes 776f22913b8e ("sched/clock: Make local_clock() noinstr")
---
 kernel/sched/clock.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/sched/clock.c +3 -0
index 5732fa75ebab2..b5cc2b53464de 100644
@@ -300,6 +300,9 @@ noinstr u64 local_clock(void)
 	if (static_branch_likely(&__sched_clock_stable))
 		return sched_clock() + __sched_clock_offset;
 
+	if (!static_branch_likely(&sched_clock_running))
+		return sched_clock();
+
 	preempt_disable_notrace();
 	clock = sched_clock_local(this_scd());
 	preempt_enable_notrace();
Signature · 1 line
2.39.2
author maintainer
#573 lore raw

PATCH 571/694 Fix addition on an uninitialized variable run

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit 54a0dffa62de0c91b406ff32082a121ccfa0d7f1 ]

The variable run is not initialized however it is being accumulated by the return value from the call to ikm_run_monitor. Fix this by initializing run to zero at the start of the function.

Fixes 4bc4b131d44c ("rv: Add rv tool")
---
 tools/verification/rv/src/rv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/verification/rv/src/rv.c +1 -1
index e601cd9c411e1..1ddb855328165 100644
@@ -74,7 +74,7 @@ static void rv_list(int argc, char **argv)
 static void rv_mon(int argc, char **argv)
 {
 	char *monitor_name;
-	int i, run;
+	int i, run = 0;
 
 	static const char *const usage[] = {
 		"",
Signature · 1 line
2.39.2
author maintainer
#574 lore raw

PATCH 572/694 rtla/timerlat: Fix "Previous IRQ" auto analysis line

In reply to Greg Kroah-Hartman

From: Daniel Bristot de Oliveira <[email protected]>

[ Upstream commit 82253a271aae9271fcf0aaa5e0ecc6dd38fb872b ]

The "Previous IRQ interference" line is misaligned and without a \n, breaking the tool's output:

## CPU 12 hit stop tracing, analyzing it ##
Previous IRQ interference: up to 2.22 us IRQ handler delay: 18.06 us (0.00 %)
IRQ latency: 18.52 us
Timerlat IRQ duration: 4.41 us (0.00 %)
Blocking thread: 216.93 us (0.03 %)

Fix the output:

## CPU 7 hit stop tracing, analyzing it ##
Previous IRQ interference: up to 8.93 us
IRQ handler delay: 0.98 us (0.00 %)
IRQ latency: 2.95 us
Timerlat IRQ duration: 11.26 us (0.03 %)

Fixes 27e348b221f6 ("rtla/timerlat: Add auto-analysis core")
Cc Masami Hiramatsu <[email protected]>
---
 tools/tracing/rtla/src/timerlat_aa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/tracing/rtla/src/timerlat_aa.c +1 -1
index ec4e0f4b0e6cd..1843fff66da5b 100644
@@ -548,7 +548,7 @@ static void timerlat_thread_analysis(struct timerlat_aa_data *taa_data, int cpu,
 	exp_irq_ts = taa_data->timer_irq_start_time - taa_data->timer_irq_start_delay;
 
 	if (exp_irq_ts < taa_data->prev_irq_timstamp + taa_data->prev_irq_duration)
-		printf("  Previous IRQ interference:	\t	up to %9.2f us",
+		printf("  Previous IRQ interference:	\t\t up to  %9.2f us\n",
 			ns_to_usf(taa_data->prev_irq_duration));
 
 	/*
Signature · 1 line
2.39.2
author maintainer
#575 lore raw

PATCH 573/694 tracing/user_events: Ensure write index cannot be negative

In reply to Greg Kroah-Hartman

From: Beau Belgrave <[email protected]>

[ Upstream commit cd98c93286a30cc4588dfd02453bec63c2f4acf4 ]

The write index indicates which event the data is for and accesses a per-file array. The index is passed by user processes during write() calls as the first 4 bytes. Ensure that it cannot be negative by returning -EINVAL to prevent out of bounds accesses.

Update ftrace self-test to ensure this occurs properly.

Fixes 7f5a08c79df3 ("user_events: Add minimal support for trace_event into ftrace")
---
 kernel/trace/trace_events_user.c                  | 3 +++
 tools/testing/selftests/user_events/ftrace_test.c | 5 +++++
 2 files changed, 8 insertions(+)
kernel/trace/trace_events_user.c +3 -0
index 908e8a13c675b..625cab4b9d945 100644
@@ -1398,6 +1398,9 @@ static ssize_t user_events_write_core(struct file *file, struct iov_iter *i)
 	if (unlikely(copy_from_iter(&idx, sizeof(idx), i) != sizeof(idx)))
 		return -EFAULT;
 
+	if (idx < 0)
+		return -EINVAL;
+
 	rcu_read_lock_sched();
 
 	refs = rcu_dereference_sched(info->refs);
tools/testing/selftests/user_events/ftrace_test.c +5 -0
index 404a2713dcae8..1bc26e6476fc3 100644
@@ -294,6 +294,11 @@ TEST_F(user, write_events) {
 	ASSERT_NE(-1, writev(self->data_fd, (const struct iovec *)io, 3));
 	after = trace_bytes();
 	ASSERT_GT(after, before);
+
+	/* Negative index should fail with EINVAL */
+	reg.write_index = -1;
+	ASSERT_EQ(-1, writev(self->data_fd, (const struct iovec *)io, 3));
+	ASSERT_EQ(EINVAL, errno);
 }
 
 TEST_F(user, write_fault) {
Signature · 1 line
2.39.2
author maintainer
#576 lore raw

PATCH 574/694 clk: at91: clk-sam9x60-pll: fix return value check

In reply to Greg Kroah-Hartman

From: Claudiu Beznea <[email protected]>

[ Upstream commit 1bd8e27fd0db0fe7f489213836dcbab92934f8fa ]

sam9x60_frac_pll_compute_mul_frac() can't return zero. Remove the check against zero to reflect this.

Fixes 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
---
 drivers/clk/at91/clk-sam9x60-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/at91/clk-sam9x60-pll.c +1 -1
index d757003004cbb..0882ed01d5c27 100644
@@ -668,7 +668,7 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
 
 		ret = sam9x60_frac_pll_compute_mul_frac(&frac->core, FCORE_MIN,
 							parent_rate, true);
-		if (ret <= 0) {
+		if (ret < 0) {
 			hw = ERR_PTR(ret);
 			goto free;
 		}
Signature · 1 line
2.39.2
author maintainer
#577 lore raw

PATCH 575/694 IB/hifi1: add a null check of kzalloc_node in hfi1_ipoib_txreq_init

In reply to Greg Kroah-Hartman

From: Kang Chen <[email protected]>

[ Upstream commit c874ad879c2f29ebe040a34b974389875c0d81eb ]

kzalloc_node may fails, check it and do the cleanup.

Fixes b1151b74ff68 ("IB/hfi1: Fix alloc failure with larger txqueuelen")
---
 drivers/infiniband/hw/hfi1/ipoib_tx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/infiniband/hw/hfi1/ipoib_tx.c +4 -1
index 5d9a7b09ca37e..349eb41391368 100644
@@ -737,10 +737,13 @@ int hfi1_ipoib_txreq_init(struct hfi1_ipoib_dev_priv *priv)
 		txq->tx_ring.shift = ilog2(tx_item_size);
 		txq->tx_ring.avail = hfi1_ipoib_ring_hwat(txq);
 		tx_ring = &txq->tx_ring;
-		for (j = 0; j < tx_ring_size; j++)
+		for (j = 0; j < tx_ring_size; j++) {
 			hfi1_txreq_from_idx(tx_ring, j)->sdma_hdr =
 				kzalloc_node(sizeof(*tx->sdma_hdr),
 					     GFP_KERNEL, priv->dd->node);
+			if (!hfi1_txreq_from_idx(tx_ring, j)->sdma_hdr)
+				goto free_txqs;
+		}
 
 		netif_napi_add_tx(dev, &txq->napi, hfi1_ipoib_poll_tx_ring);
 	}
Signature · 1 line
2.39.2
author maintainer
#578 lore raw

PATCH 576/694 RDMA/siw: Fix potential page_array out of range access

In reply to Greg Kroah-Hartman

From: Daniil Dulov <[email protected]>

[ Upstream commit 271bfcfb83a9f77cbae3d6e1a16e3c14132922f0 ]

When seg is equal to MAX_ARRAY, the loop should break, otherwise it will result in out of range access.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

---
 drivers/infiniband/sw/siw/siw_qp_tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/sw/siw/siw_qp_tx.c +1 -1
index 05052b49107f2..6bb9e9e81ff4c 100644
@@ -558,7 +558,7 @@ static int siw_tx_hdt(struct siw_iwarp_tx *c_tx, struct socket *s)
 			data_len -= plen;
 			fp_off = 0;
 
-			if (++seg > (int)MAX_ARRAY) {
+			if (++seg >= (int)MAX_ARRAY) {
 				siw_dbg_qp(tx_qp(c_tx), "to many fragments\n");
 				siw_unmap_pages(iov, kmap_mask, seg-1);
 				wqe->processed -= c_tx->bytes_unsent;
Signature · 1 line
2.39.2
author maintainer
#579 lore raw

PATCH 577/694 clk: mediatek: mt2712: Add error handling to clk_mt2712_apmixed_probe()

In reply to Greg Kroah-Hartman

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit 20cace1b9d7e33f68f0ee17196bf0df618dbacbe ]

This function was completely missing error handling: add it.

---
 drivers/clk/mediatek/clk-mt2712.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/clk/mediatek/clk-mt2712.c +14 -4
index 94f8fc2a4f7bd..aa39d006358a3 100644
@@ -1283,15 +1283,25 @@ static int clk_mt2712_apmixed_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 
 	clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
+	if (!clk_data)
+		return -ENOMEM;
 
-	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+	r = mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+	if (r)
+		goto free_clk_data;
 
 	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	if (r) {
+		dev_err(&pdev->dev, "Cannot register clock provider: %d\n", r);
+		goto unregister_plls;
+	}
 
-	if (r != 0)
-		pr_err("%s(): could not register clock provider: %d\n",
-			__func__, r);
+	return 0;
 
+unregister_plls:
+	mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data);
+free_clk_data:
+	mtk_free_clk_data(clk_data);
 	return r;
 }
 
Signature · 1 line
2.39.2
author maintainer
#580 lore raw

PATCH 578/694 clk: mediatek: Consistently use GATE_MTK() macro

In reply to Greg Kroah-Hartman

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit 4c85e20b656607897e3bb06ff565822fa4b4de95 ]

All the various MediaTek clock drivers are, in a way or another, redefining the GATE_MTK() macro with different names: while some are doing that by actually using GATE_MTK(), others are copying it entirely (hence, entirely redefining it).

Change all clock drivers to always and consistently use this macro.

Stable-dep-of: fa8c0d01df62 ("clk: mediatek: mt7622: Properly use CLK_IS_CRITICAL flag")

---
 drivers/clk/mediatek/clk-mt2701-aud.c      | 40 +++--------
 drivers/clk/mediatek/clk-mt2701-bdp.c      | 20 ++----
 drivers/clk/mediatek/clk-mt2701-eth.c      | 10 +--
 drivers/clk/mediatek/clk-mt2701-g3d.c      | 10 +--
 drivers/clk/mediatek/clk-mt2701-hif.c      | 10 +--
 drivers/clk/mediatek/clk-mt2701-img.c      | 10 +--
 drivers/clk/mediatek/clk-mt2701-mm.c       | 20 ++----
 drivers/clk/mediatek/clk-mt2701-vdec.c     | 20 ++----
 drivers/clk/mediatek/clk-mt2701.c          | 40 +++--------
 drivers/clk/mediatek/clk-mt2712-bdp.c      | 10 +--
 drivers/clk/mediatek/clk-mt2712-img.c      | 10 +--
 drivers/clk/mediatek/clk-mt2712-jpgdec.c   | 10 +--
 drivers/clk/mediatek/clk-mt2712-mfg.c      | 10 +--
 drivers/clk/mediatek/clk-mt2712-mm.c       | 34 +++------
 drivers/clk/mediatek/clk-mt2712-vdec.c     | 20 ++----
 drivers/clk/mediatek/clk-mt2712-venc.c     | 10 +--
 drivers/clk/mediatek/clk-mt2712.c          | 60 ++++------------
 drivers/clk/mediatek/clk-mt6765-audio.c    | 20 ++----
 drivers/clk/mediatek/clk-mt6765-cam.c      | 10 +--
 drivers/clk/mediatek/clk-mt6765-img.c      | 10 +--
 drivers/clk/mediatek/clk-mt6765-mipi0a.c   | 10 +--
 drivers/clk/mediatek/clk-mt6765-mm.c       | 10 +--
 drivers/clk/mediatek/clk-mt6765-vcodec.c   | 10 +--
 drivers/clk/mediatek/clk-mt6765.c          | 80 +++++-----------------
 drivers/clk/mediatek/clk-mt6797-img.c      | 10 +--
 drivers/clk/mediatek/clk-mt6797-mm.c       | 20 ++----
 drivers/clk/mediatek/clk-mt6797-vdec.c     | 20 ++----
 drivers/clk/mediatek/clk-mt6797-venc.c     | 10 +--
 drivers/clk/mediatek/clk-mt6797.c          | 42 ++++--------
 drivers/clk/mediatek/clk-mt7622-aud.c      | 40 +++--------
 drivers/clk/mediatek/clk-mt7622-eth.c      | 20 ++----
 drivers/clk/mediatek/clk-mt7622-hif.c      | 22 ++----
 drivers/clk/mediatek/clk-mt7622.c          | 61 ++++-------------
 drivers/clk/mediatek/clk-mt7629-eth.c      | 20 ++----
 drivers/clk/mediatek/clk-mt7629-hif.c      | 22 ++----
 drivers/clk/mediatek/clk-mt7629.c          | 40 +++--------
 drivers/clk/mediatek/clk-mt7986-eth.c      | 24 ++-----
 drivers/clk/mediatek/clk-mt7986-infracfg.c | 24 ++-----
 drivers/clk/mediatek/clk-mt8135.c          | 30 ++------
 drivers/clk/mediatek/clk-mt8167-aud.c      | 11 +--
 drivers/clk/mediatek/clk-mt8167-img.c      | 10 +--
 drivers/clk/mediatek/clk-mt8167-mfgcfg.c   | 10 +--
 drivers/clk/mediatek/clk-mt8167-mm.c       | 22 ++----
 drivers/clk/mediatek/clk-mt8167-vdec.c     | 20 ++----
 drivers/clk/mediatek/clk-mt8173-mm.c       | 22 ++----
 drivers/clk/mediatek/clk-mt8516-aud.c      | 10 +--
 drivers/clk/mediatek/clk-mt8516.c          | 60 ++++------------
 47 files changed, 224 insertions(+), 840 deletions(-)
drivers/clk/mediatek/clk-mt2701-aud.c +8 -32
index 1a32d8b7db84f..21f7cc106bbe5 100644
@@ -15,41 +15,17 @@
 
 #include <dt-bindings/clock/mt2701-clk.h>
 
-#define GATE_AUDIO0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO0(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio0_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
-#define GATE_AUDIO1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO1(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
-#define GATE_AUDIO2(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio2_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO2(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio2_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
-#define GATE_AUDIO3(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio3_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO3(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio3_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
 static const struct mtk_gate_regs audio0_cg_regs = {
 	.set_ofs = 0x0,
drivers/clk/mediatek/clk-mt2701-bdp.c +4 -16
index 435ed4819d563..b0f0572079452 100644
@@ -24,23 +24,11 @@ static const struct mtk_gate_regs bdp1_cg_regs = {
 	.sta_ofs = 0x0110,
 };
 
-#define GATE_BDP0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &bdp0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_BDP0(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &bdp0_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
-#define GATE_BDP1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &bdp1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_BDP1(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &bdp1_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate bdp_clks[] = {
 	GATE_BDP0(CLK_BDP_BRG_BA, "brg_baclk", "mm_sel", 0),
drivers/clk/mediatek/clk-mt2701-eth.c +2 -8
index f3cb78e7f6e9e..4c830ebdd7613 100644
@@ -16,14 +16,8 @@ static const struct mtk_gate_regs eth_cg_regs = {
 	.sta_ofs = 0x0030,
 };
 
-#define GATE_ETH(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &eth_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_ETH(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &eth_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate eth_clks[] = {
 	GATE_DUMMY(CLK_DUMMY, "eth_dummy"),
drivers/clk/mediatek/clk-mt2701-g3d.c +2 -8
index 499a170ba5f92..ae094046890aa 100644
@@ -16,14 +16,8 @@
 
 #include <dt-bindings/clock/mt2701-clk.h>
 
-#define GATE_G3D(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &g3d_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_G3D(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &g3d_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate_regs g3d_cg_regs = {
 	.sta_ofs = 0x0,
drivers/clk/mediatek/clk-mt2701-hif.c +2 -8
index d5465d7829935..3583bd1240d55 100644
@@ -16,14 +16,8 @@ static const struct mtk_gate_regs hif_cg_regs = {
 	.sta_ofs = 0x0030,
 };
 
-#define GATE_HIF(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &hif_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_HIF(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &hif_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate hif_clks[] = {
 	GATE_DUMMY(CLK_DUMMY, "hif_dummy"),
drivers/clk/mediatek/clk-mt2701-img.c +2 -8
index 7e53deb7f9905..eb172473f0755 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs img_cg_regs = {
 	.sta_ofs = 0x0000,
 };
 
-#define GATE_IMG(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &img_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_IMG(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &img_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate img_clks[] = {
 	GATE_IMG(CLK_IMG_SMI_COMM, "img_smi_comm", "mm_sel", 0),
drivers/clk/mediatek/clk-mt2701-mm.c +4 -16
index 23d5ddcc1d372..f4885dffb324f 100644
@@ -24,23 +24,11 @@ static const struct mtk_gate_regs disp1_cg_regs = {
 	.sta_ofs = 0x0110,
 };
 
-#define GATE_DISP0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &disp0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_DISP0(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &disp0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_DISP1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &disp1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_DISP1(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &disp1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mm_clks[] = {
 	GATE_DISP0(CLK_MM_SMI_COMMON, "mm_smi_comm", "mm_sel", 0),
drivers/clk/mediatek/clk-mt2701-vdec.c +4 -16
index d3089da0ab62e..0f07c5d731df6 100644
@@ -24,23 +24,11 @@ static const struct mtk_gate_regs vdec1_cg_regs = {
 	.sta_ofs = 0x0008,
 };
 
-#define GATE_VDEC0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &vdec0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VDEC0(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &vdec0_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
-#define GATE_VDEC1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &vdec1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VDEC1(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &vdec1_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate vdec_clks[] = {
 	GATE_VDEC0(CLK_VDEC_CKGEN, "vdec_cken", "vdec_sel", 0),
drivers/clk/mediatek/clk-mt2701.c +8 -32
index 06ca81359d350..dfe328f7a44b2 100644
@@ -636,14 +636,8 @@ static const struct mtk_gate_regs top_aud_cg_regs = {
 	.sta_ofs = 0x012C,
 };
 
-#define GATE_TOP_AUD(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &top_aud_cg_regs,		\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_TOP_AUD(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &top_aud_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
 static const struct mtk_gate top_clks[] = {
 	GATE_TOP_AUD(CLK_TOP_AUD_48K_TIMING, "a1sys_hp_ck", "aud_mux1_div",
@@ -702,14 +696,8 @@ static const struct mtk_gate_regs infra_cg_regs = {
 	.sta_ofs = 0x0048,
 };
 
-#define GATE_ICG(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &infra_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_ICG(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &infra_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate infra_clks[] = {
 	GATE_ICG(CLK_INFRA_DBG, "dbgclk", "axi_sel", 0),
@@ -823,23 +811,11 @@ static const struct mtk_gate_regs peri1_cg_regs = {
 	.sta_ofs = 0x001c,
 };
 
-#define GATE_PERI0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &peri0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_PERI0(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &peri0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_PERI1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &peri1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_PERI1(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &peri1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate peri_clks[] = {
 	GATE_PERI0(CLK_PERI_USB0_MCU, "usb0_mcu_ck", "axi_sel", 31),
drivers/clk/mediatek/clk-mt2712-bdp.c +2 -8
index 684d03e9f6de1..5e668651dd901 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs bdp_cg_regs = {
 	.sta_ofs = 0x100,
 };
 
-#define GATE_BDP(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &bdp_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_BDP(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &bdp_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
 static const struct mtk_gate bdp_clks[] = {
 	GATE_BDP(CLK_BDP_BRIDGE_B, "bdp_bridge_b", "mm_sel", 0),
drivers/clk/mediatek/clk-mt2712-img.c +2 -8
index 335049cdc856c..3ffa51384e6b2 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs img_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_IMG(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &img_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_IMG(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &img_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
 static const struct mtk_gate img_clks[] = {
 	GATE_IMG(CLK_IMG_SMI_LARB2, "img_smi_larb2", "mm_sel", 0),
drivers/clk/mediatek/clk-mt2712-jpgdec.c +2 -8
index 07ba7c5e80aff..8c768d5ce24d5 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs jpgdec_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_JPGDEC(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &jpgdec_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_JPGDEC(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &jpgdec_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate jpgdec_clks[] = {
 	GATE_JPGDEC(CLK_JPGDEC_JPGDEC1, "jpgdec_jpgdec1", "jpgdec_sel", 0),
drivers/clk/mediatek/clk-mt2712-mfg.c +2 -8
index 42f8cf3ecf4cb..8949315c2dd20 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs mfg_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_MFG(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mfg_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_MFG(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &mfg_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mfg_clks[] = {
 	GATE_MFG(CLK_MFG_BG3D, "mfg_bg3d", "mfg_sel", 0),
drivers/clk/mediatek/clk-mt2712-mm.c +8 -26
index 25b8af640c128..e5264f1ce60d0 100644
@@ -30,32 +30,14 @@ static const struct mtk_gate_regs mm2_cg_regs = {
 	.sta_ofs = 0x220,
 };
 
-#define GATE_MM0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mm0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
-
-#define GATE_MM1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mm1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
-
-#define GATE_MM2(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mm2_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_MM0(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_MM1(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_MM2(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm2_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mm_clks[] = {
 	/* MM0 */
drivers/clk/mediatek/clk-mt2712-vdec.c +4 -16
index 6296ed5c5b555..572290dd43c87 100644
@@ -24,23 +24,11 @@ static const struct mtk_gate_regs vdec1_cg_regs = {
 	.sta_ofs = 0x8,
 };
 
-#define GATE_VDEC0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &vdec0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VDEC0(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &vdec0_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
-#define GATE_VDEC1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &vdec1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VDEC1(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &vdec1_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate vdec_clks[] = {
 	/* VDEC0 */
drivers/clk/mediatek/clk-mt2712-venc.c +2 -8
index b9bfc35de629c..9588eb03016eb 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs venc_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_VENC(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &venc_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VENC(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &venc_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate venc_clks[] = {
 	GATE_VENC(CLK_VENC_SMI_COMMON_CON, "venc_smi", "mm_sel", 0),
drivers/clk/mediatek/clk-mt2712.c +12 -48

81 lines not on this page · raw message

drivers/clk/mediatek/clk-mt6765-audio.c +4 -16
index 0aa6c0d352ca5..5682e0302eee2 100644
@@ -24,23 +24,11 @@ static const struct mtk_gate_regs audio1_cg_regs = {
 	.sta_ofs = 0x4,
 };
 
-#define GATE_AUDIO0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio0_cg_regs,		\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO0(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio0_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
-#define GATE_AUDIO1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio1_cg_regs,		\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO1(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
 static const struct mtk_gate audio_clks[] = {
 	/* AUDIO0 */
drivers/clk/mediatek/clk-mt6765-cam.c +2 -8
index 25f2bef38126e..6e7d192c19cb0 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs cam_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_CAM(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &cam_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_CAM(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &cam_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate cam_clks[] = {
 	GATE_CAM(CLK_CAM_LARB3, "cam_larb3", "mm_ck", 0),
drivers/clk/mediatek/clk-mt6765-img.c +2 -8
index a62303ef4f41d..cfbc907988aff 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs img_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_IMG(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &img_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_IMG(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &img_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate img_clks[] = {
 	GATE_IMG(CLK_IMG_LARB2, "img_larb2", "mm_ck", 0),
drivers/clk/mediatek/clk-mt6765-mipi0a.c +2 -8
index 25c829fc38661..f2b9dc8084801 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs mipi0a_cg_regs = {
 	.sta_ofs = 0x80,
 };
 
-#define GATE_MIPI0A(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mipi0a_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_MIPI0A(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &mipi0a_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate mipi0a_clks[] = {
 	GATE_MIPI0A(CLK_MIPI0A_CSR_CSI_EN_0A,
drivers/clk/mediatek/clk-mt6765-mm.c +2 -8
index bda774668a361..a4570c9dbefa5 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs mm_cg_regs = {
 	.sta_ofs = 0x100,
 };
 
-#define GATE_MM(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mm_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_MM(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mm_clks[] = {
 	/* MM */
drivers/clk/mediatek/clk-mt6765-vcodec.c +2 -8
index 2bc1fbde87da9..75d72b9b4032c 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs venc_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_VENC(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &venc_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VENC(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &venc_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate venc_clks[] = {
 	GATE_VENC(CLK_VENC_SET0_LARB, "venc_set0_larb", "mm_ck", 0),
drivers/clk/mediatek/clk-mt6765.c +16 -64

103 lines not on this page · raw message

drivers/clk/mediatek/clk-mt6797-img.c +2 -8
index 7c6a53fbb8be6..06441393478f6 100644
@@ -16,14 +16,8 @@ static const struct mtk_gate_regs img_cg_regs = {
 	.sta_ofs = 0x0000,
 };
 
-#define GATE_IMG(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &img_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_IMG(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &img_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate img_clks[] = {
 	GATE_IMG(CLK_IMG_FDVT, "img_fdvt", "mm_sel", 11),
drivers/clk/mediatek/clk-mt6797-mm.c +4 -16
index deb16a6b16a5e..d5e9fe445e308 100644
@@ -23,23 +23,11 @@ static const struct mtk_gate_regs mm1_cg_regs = {
 	.sta_ofs = 0x0110,
 };
 
-#define GATE_MM0(_id, _name, _parent, _shift) {			\
-	.id = _id,					\
-	.name = _name,					\
-	.parent_name = _parent,				\
-	.regs = &mm0_cg_regs,				\
-	.shift = _shift,				\
-	.ops = &mtk_clk_gate_ops_setclr,		\
-}
+#define GATE_MM0(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_MM1(_id, _name, _parent, _shift) {			\
-	.id = _id,					\
-	.name = _name,					\
-	.parent_name = _parent,				\
-	.regs = &mm1_cg_regs,				\
-	.shift = _shift,				\
-	.ops = &mtk_clk_gate_ops_setclr,		\
-}
+#define GATE_MM1(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mm_clks[] = {
 	GATE_MM0(CLK_MM_SMI_COMMON, "mm_smi_common", "mm_sel", 0),
drivers/clk/mediatek/clk-mt6797-vdec.c +4 -16
index 6120fccc859f1..8622ddd87a5bb 100644
@@ -24,23 +24,11 @@ static const struct mtk_gate_regs vdec1_cg_regs = {
 	.sta_ofs = 0x0008,
 };
 
-#define GATE_VDEC0(_id, _name, _parent, _shift) {		\
-	.id = _id,					\
-	.name = _name,					\
-	.parent_name = _parent,				\
-	.regs = &vdec0_cg_regs,				\
-	.shift = _shift,				\
-	.ops = &mtk_clk_gate_ops_setclr_inv,		\
-}
+#define GATE_VDEC0(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &vdec0_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
-#define GATE_VDEC1(_id, _name, _parent, _shift) {		\
-	.id = _id,					\
-	.name = _name,					\
-	.parent_name = _parent,				\
-	.regs = &vdec1_cg_regs,				\
-	.shift = _shift,				\
-	.ops = &mtk_clk_gate_ops_setclr_inv,		\
-}
+#define GATE_VDEC1(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &vdec1_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate vdec_clks[] = {
 	GATE_VDEC0(CLK_VDEC_CKEN_ENG, "vdec_cken_eng", "vdec_sel", 8),
drivers/clk/mediatek/clk-mt6797-venc.c +2 -8
index 834d3834d2bbc..928d611a476e4 100644
@@ -18,14 +18,8 @@ static const struct mtk_gate_regs venc_cg_regs = {
 	.sta_ofs = 0x0000,
 };
 
-#define GATE_VENC(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &venc_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VENC(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &venc_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate venc_clks[] = {
 	GATE_VENC(CLK_VENC_0, "venc_0", "mm_sel", 0),
drivers/clk/mediatek/clk-mt6797.c +12 -30

52 lines not on this page · raw message

drivers/clk/mediatek/clk-mt7622-aud.c +8 -32
index b8aabfeb1cba4..27c543759f2ab 100644
@@ -16,41 +16,17 @@
 
 #include <dt-bindings/clock/mt7622-clk.h>
 
-#define GATE_AUDIO0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO0(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio0_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
-#define GATE_AUDIO1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO1(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
-#define GATE_AUDIO2(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio2_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO2(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio2_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
-#define GATE_AUDIO3(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &audio3_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr,	\
-	}
+#define GATE_AUDIO3(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &audio3_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
 static const struct mtk_gate_regs audio0_cg_regs = {
 	.set_ofs = 0x0,
drivers/clk/mediatek/clk-mt7622-eth.c +4 -16
index aee583fa77d0c..66b163cc16330 100644
@@ -16,14 +16,8 @@
 
 #include <dt-bindings/clock/mt7622-clk.h>
 
-#define GATE_ETH(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &eth_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_ETH(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &eth_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate_regs eth_cg_regs = {
 	.set_ofs = 0x30,
@@ -45,14 +39,8 @@ static const struct mtk_gate_regs sgmii_cg_regs = {
 	.sta_ofs = 0xE4,
 };
 
-#define GATE_SGMII(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &sgmii_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_SGMII(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &sgmii_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate sgmii_clks[] = {
 	GATE_SGMII(CLK_SGMII_TX250M_EN, "sgmii_tx250m_en",
drivers/clk/mediatek/clk-mt7622-hif.c +5 -17
index ab5cad0c2b1c9..bcd1dfc6e8e0c 100644
@@ -16,23 +16,11 @@
 
 #include <dt-bindings/clock/mt7622-clk.h>
 
-#define GATE_PCIE(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &pcie_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
-
-#define GATE_SSUSB(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &ssusb_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_PCIE(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &pcie_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
+
+#define GATE_SSUSB(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &ssusb_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate_regs pcie_cg_regs = {
 	.set_ofs = 0x30,
drivers/clk/mediatek/clk-mt7622.c +13 -48

72 lines not on this page · raw message

drivers/clk/mediatek/clk-mt7629-eth.c +4 -16
index a4ae7d6c7a71a..719a47fef7980 100644
@@ -16,14 +16,8 @@
 
 #include <dt-bindings/clock/mt7629-clk.h>
 
-#define GATE_ETH(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &eth_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_ETH(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &eth_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate_regs eth_cg_regs = {
 	.set_ofs = 0x30,
@@ -45,14 +39,8 @@ static const struct mtk_gate_regs sgmii_cg_regs = {
 	.sta_ofs = 0xE4,
 };
 
-#define GATE_SGMII(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &sgmii_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_SGMII(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &sgmii_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate sgmii_clks[2][4] = {
 	{
drivers/clk/mediatek/clk-mt7629-hif.c +5 -17
index c3eb09ea6036f..78d85542e4f17 100644
@@ -16,23 +16,11 @@
 
 #include <dt-bindings/clock/mt7629-clk.h>
 
-#define GATE_PCIE(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &pcie_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
-
-#define GATE_SSUSB(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &ssusb_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_PCIE(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &pcie_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
+
+#define GATE_SSUSB(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &ssusb_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate_regs pcie_cg_regs = {
 	.set_ofs = 0x30,
drivers/clk/mediatek/clk-mt7629.c +8 -32
index cf062d4a7ecc4..09c85fda43d84 100644
@@ -50,41 +50,17 @@
 		_pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift,	\
 		NULL, "clk20m")
 
-#define GATE_APMIXED(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &apmixed_cg_regs,		\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
-	}
+#define GATE_APMIXED(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &apmixed_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
-#define GATE_INFRA(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &infra_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_INFRA(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &infra_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_PERI0(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &peri0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_PERI0(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &peri0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_PERI1(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &peri1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_PERI1(_id, _name, _parent, _shift)				\
+	GATE_MTK(_id, _name, _parent, &peri1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static DEFINE_SPINLOCK(mt7629_clk_lock);
 
drivers/clk/mediatek/clk-mt7986-eth.c +6 -18
index 703872239ecca..e04bc6845ea6d 100644
@@ -22,12 +22,8 @@ static const struct mtk_gate_regs sgmii0_cg_regs = {
 	.sta_ofs = 0xe4,
 };
 
-#define GATE_SGMII0(_id, _name, _parent, _shift)                               \
-	{                                                                      \
-		.id = _id, .name = _name, .parent_name = _parent,              \
-		.regs = &sgmii0_cg_regs, .shift = _shift,                      \
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
-	}
+#define GATE_SGMII0(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &sgmii0_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate sgmii0_clks[] __initconst = {
 	GATE_SGMII0(CLK_SGMII0_TX250M_EN, "sgmii0_tx250m_en", "top_xtal", 2),
@@ -42,12 +38,8 @@ static const struct mtk_gate_regs sgmii1_cg_regs = {
 	.sta_ofs = 0xe4,
 };
 
-#define GATE_SGMII1(_id, _name, _parent, _shift)                               \
-	{                                                                      \
-		.id = _id, .name = _name, .parent_name = _parent,              \
-		.regs = &sgmii1_cg_regs, .shift = _shift,                      \
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
-	}
+#define GATE_SGMII1(_id, _name, _parent, _shift)		\
+	GATE_MTK(_id, _name, _parent, &sgmii1_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate sgmii1_clks[] __initconst = {
 	GATE_SGMII1(CLK_SGMII1_TX250M_EN, "sgmii1_tx250m_en", "top_xtal", 2),
@@ -62,12 +54,8 @@ static const struct mtk_gate_regs eth_cg_regs = {
 	.sta_ofs = 0x30,
 };
 
-#define GATE_ETH(_id, _name, _parent, _shift)                                  \
-	{                                                                      \
-		.id = _id, .name = _name, .parent_name = _parent,              \
-		.regs = &eth_cg_regs, .shift = _shift,                         \
-		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
-	}
+#define GATE_ETH(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &eth_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
 
 static const struct mtk_gate eth_clks[] __initconst = {
 	GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", "netsys_2x_sel", 6),
drivers/clk/mediatek/clk-mt7986-infracfg.c +6 -18
index e80c92167c8fc..0a4bf87ee1607 100644
@@ -87,26 +87,14 @@ static const struct mtk_gate_regs infra2_cg_regs = {
 	.sta_ofs = 0x68,
 };
 
-#define GATE_INFRA0(_id, _name, _parent, _shift)                               \
-	{                                                                      \
-		.id = _id, .name = _name, .parent_name = _parent,              \
-		.regs = &infra0_cg_regs, .shift = _shift,                      \
-		.ops = &mtk_clk_gate_ops_setclr,                               \
-	}
+#define GATE_INFRA0(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &infra0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_INFRA1(_id, _name, _parent, _shift)                               \
-	{                                                                      \
-		.id = _id, .name = _name, .parent_name = _parent,              \
-		.regs = &infra1_cg_regs, .shift = _shift,                      \
-		.ops = &mtk_clk_gate_ops_setclr,                               \
-	}
+#define GATE_INFRA1(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &infra1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_INFRA2(_id, _name, _parent, _shift)                               \
-	{                                                                      \
-		.id = _id, .name = _name, .parent_name = _parent,              \
-		.regs = &infra2_cg_regs, .shift = _shift,                      \
-		.ops = &mtk_clk_gate_ops_setclr,                               \
-	}
+#define GATE_INFRA2(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &infra2_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate infra_clks[] = {
 	/* INFRA0 */
drivers/clk/mediatek/clk-mt8135.c +6 -24
index 2b9c925c2a2ba..97a115d2c3daa 100644
@@ -401,14 +401,8 @@ static const struct mtk_gate_regs infra_cg_regs = {
 	.sta_ofs = 0x0048,
 };
 
-#define GATE_ICG(_id, _name, _parent, _shift) {	\
-		.id = _id,					\
-		.name = _name,					\
-		.parent_name = _parent,				\
-		.regs = &infra_cg_regs,				\
-		.shift = _shift,				\
-		.ops = &mtk_clk_gate_ops_setclr,		\
-	}
+#define GATE_ICG(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &infra_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate infra_clks[] __initconst = {
 	GATE_ICG(CLK_INFRA_PMIC_WRAP, "pmic_wrap_ck", "axi_sel", 23),
@@ -438,23 +432,11 @@ static const struct mtk_gate_regs peri1_cg_regs = {
 	.sta_ofs = 0x001c,
 };
 
-#define GATE_PERI0(_id, _name, _parent, _shift) {	\
-		.id = _id,					\
-		.name = _name,					\
-		.parent_name = _parent,				\
-		.regs = &peri0_cg_regs,				\
-		.shift = _shift,				\
-		.ops = &mtk_clk_gate_ops_setclr,		\
-	}
+#define GATE_PERI0(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &peri0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
-#define GATE_PERI1(_id, _name, _parent, _shift) {	\
-		.id = _id,					\
-		.name = _name,					\
-		.parent_name = _parent,				\
-		.regs = &peri1_cg_regs,				\
-		.shift = _shift,				\
-		.ops = &mtk_clk_gate_ops_setclr,		\
-	}
+#define GATE_PERI1(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &peri1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate peri_gates[] __initconst = {
 	/* PERI0 */
drivers/clk/mediatek/clk-mt8167-aud.c +3 -8
index f6bea6e9e6a4e..47a7d89d5777c 100644
@@ -23,14 +23,9 @@ static const struct mtk_gate_regs aud_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_AUD(_id, _name, _parent, _shift) {	\
-		.id = _id,			\
-		.name = _name,			\
-		.parent_name = _parent,		\
-		.regs = &aud_cg_regs,		\
-		.shift = _shift,		\
-		.ops = &mtk_clk_gate_ops_no_setclr,		\
-	}
+#define GATE_AUD(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &aud_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
+
 
 static const struct mtk_gate aud_clks[] __initconst = {
 	GATE_AUD(CLK_AUD_AFE, "aud_afe", "clk26m_ck", 2),
drivers/clk/mediatek/clk-mt8167-img.c +2 -8
index 77db13b177fcc..e196b3b894a16 100644
@@ -23,14 +23,8 @@ static const struct mtk_gate_regs img_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_IMG(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &img_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_IMG(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &img_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate img_clks[] __initconst = {
 	GATE_IMG(CLK_IMG_LARB1_SMI, "img_larb1_smi", "smi_mm", 0),
drivers/clk/mediatek/clk-mt8167-mfgcfg.c +2 -8
index 3c23591b02f7f..602d25f4cb2e2 100644
@@ -23,14 +23,8 @@ static const struct mtk_gate_regs mfg_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_MFG(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mfg_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_MFG(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &mfg_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mfg_clks[] __initconst = {
 	GATE_MFG(CLK_MFG_BAXI, "mfg_baxi", "ahb_infra_sel", 0),
drivers/clk/mediatek/clk-mt8167-mm.c +5 -17
index c0b44104c765a..abc70e1221bf9 100644
@@ -29,23 +29,11 @@ static const struct mtk_gate_regs mm1_cg_regs = {
 	.sta_ofs = 0x110,
 };
 
-#define GATE_MM0(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mm0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
-
-#define GATE_MM1(_id, _name, _parent, _shift) {		\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &mm1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr,	\
-	}
+#define GATE_MM0(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_MM1(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mm_clks[] = {
 	/* MM0 */
drivers/clk/mediatek/clk-mt8167-vdec.c +4 -16
index 759e5791599f0..92bc05d997985 100644
@@ -29,23 +29,11 @@ static const struct mtk_gate_regs vdec1_cg_regs = {
 	.sta_ofs = 0x8,
 };
 
-#define GATE_VDEC0_I(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &vdec0_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VDEC0_I(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &vdec0_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
-#define GATE_VDEC1_I(_id, _name, _parent, _shift) {	\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _parent,			\
-		.regs = &vdec1_cg_regs,			\
-		.shift = _shift,			\
-		.ops = &mtk_clk_gate_ops_setclr_inv,	\
-	}
+#define GATE_VDEC1_I(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &vdec1_cg_regs, _shift, &mtk_clk_gate_ops_setclr_inv)
 
 static const struct mtk_gate vdec_clks[] __initconst = {
 	/* VDEC0 */
drivers/clk/mediatek/clk-mt8173-mm.c +5 -17
index 315430ad15814..c11ce453a88aa 100644
@@ -25,23 +25,11 @@ static const struct mtk_gate_regs mm1_cg_regs = {
 	.sta_ofs = 0x0110,
 };
 
-#define GATE_MM0(_id, _name, _parent, _shift) {			\
-		.id = _id,					\
-		.name = _name,					\
-		.parent_name = _parent,				\
-		.regs = &mm0_cg_regs,				\
-		.shift = _shift,				\
-		.ops = &mtk_clk_gate_ops_setclr,		\
-	}
-
-#define GATE_MM1(_id, _name, _parent, _shift) {			\
-		.id = _id,					\
-		.name = _name,					\
-		.parent_name = _parent,				\
-		.regs = &mm1_cg_regs,				\
-		.shift = _shift,				\
-		.ops = &mtk_clk_gate_ops_setclr,		\
-	}
+#define GATE_MM0(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
+
+#define GATE_MM1(_id, _name, _parent, _shift)	\
+	GATE_MTK(_id, _name, _parent, &mm1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
 static const struct mtk_gate mt8173_mm_clks[] = {
 	/* MM0 */
drivers/clk/mediatek/clk-mt8516-aud.c +2 -8
index 00f356fe7c7a6..a6ae8003b9ff6 100644
@@ -22,14 +22,8 @@ static const struct mtk_gate_regs aud_cg_regs = {
 	.sta_ofs = 0x0,
 };
 
-#define GATE_AUD(_id, _name, _parent, _shift) {	\
-		.id = _id,			\
-		.name = _name,			\
-		.parent_name = _parent,		\
-		.regs = &aud_cg_regs,		\
-		.shift = _shift,		\
-		.ops = &mtk_clk_gate_ops_no_setclr,		\
-	}
+#define GATE_AUD(_id, _name, _parent, _shift)			\
+	GATE_MTK(_id, _name, _parent, &aud_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr)
 
 static const struct mtk_gate aud_clks[] __initconst = {
 	GATE_AUD(CLK_AUD_AFE, "aud_afe", "clk26m_ck", 2),
drivers/clk/mediatek/clk-mt8516.c +12 -48

71 lines not on this page · raw message

Signature · 1 line
2.39.2
author maintainer
#581 lore raw

PATCH 579/694 clk: mediatek: mt7622: Properly use CLK_IS_CRITICAL flag

In reply to Greg Kroah-Hartman

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit fa8c0d01df62130ff596d560380a6f844f62639e ]

Instead of calling clk_prepare_enable() for clocks that shall stay enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that.

---
 drivers/clk/mediatek/clk-mt7622.c | 35 +++++++++++++------------------
 1 file changed, 15 insertions(+), 20 deletions(-)
drivers/clk/mediatek/clk-mt7622.c +15 -20
index 41af8d420bbf8..1c0049fbeb69c 100644
@@ -50,9 +50,9 @@
 		 _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift,  \
 		 NULL, "clkxtal")
 
-#define GATE_APMIXED(_id, _name, _parent, _shift)			\
-	GATE_MTK(_id, _name, _parent, &apmixed_cg_regs, _shift,		\
-		 &mtk_clk_gate_ops_no_setclr_inv)
+#define GATE_APMIXED_AO(_id, _name, _parent, _shift)			\
+	GATE_MTK_FLAGS(_id, _name, _parent, &apmixed_cg_regs, _shift,	\
+		 &mtk_clk_gate_ops_no_setclr_inv, CLK_IS_CRITICAL)
 
 #define GATE_INFRA(_id, _name, _parent, _shift)				\
 	GATE_MTK(_id, _name, _parent, &infra_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
@@ -66,6 +66,10 @@
 #define GATE_PERI0(_id, _name, _parent, _shift)				\
 	GATE_MTK(_id, _name, _parent, &peri0_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
+#define GATE_PERI0_AO(_id, _name, _parent, _shift)			\
+	GATE_MTK_FLAGS(_id, _name, _parent, &peri0_cg_regs, _shift,	\
+		 &mtk_clk_gate_ops_setclr, CLK_IS_CRITICAL)
+
 #define GATE_PERI1(_id, _name, _parent, _shift)				\
 	GATE_MTK(_id, _name, _parent, &peri1_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
@@ -315,7 +319,7 @@ static const struct mtk_pll_data plls[] = {
 };
 
 static const struct mtk_gate apmixed_clks[] = {
-	GATE_APMIXED(CLK_APMIXED_MAIN_CORE_EN, "main_core_en", "mainpll", 5),
+	GATE_APMIXED_AO(CLK_APMIXED_MAIN_CORE_EN, "main_core_en", "mainpll", 5),
 };
 
 static const struct mtk_gate infra_clks[] = {
@@ -450,7 +454,7 @@ static const struct mtk_gate peri_clks[] = {
 	GATE_PERI0(CLK_PERI_AP_DMA_PD, "peri_ap_dma_pd", "axi_sel", 12),
 	GATE_PERI0(CLK_PERI_MSDC30_0_PD, "peri_msdc30_0", "msdc30_0_sel", 13),
 	GATE_PERI0(CLK_PERI_MSDC30_1_PD, "peri_msdc30_1", "msdc30_1_sel", 14),
-	GATE_PERI0(CLK_PERI_UART0_PD, "peri_uart0_pd", "axi_sel", 17),
+	GATE_PERI0_AO(CLK_PERI_UART0_PD, "peri_uart0_pd", "axi_sel", 17),
 	GATE_PERI0(CLK_PERI_UART1_PD, "peri_uart1_pd", "axi_sel", 18),
 	GATE_PERI0(CLK_PERI_UART2_PD, "peri_uart2_pd", "axi_sel", 19),
 	GATE_PERI0(CLK_PERI_UART3_PD, "peri_uart3_pd", "axi_sel", 20),
@@ -478,12 +482,12 @@ static struct mtk_composite infra_muxes[] = {
 
 static struct mtk_composite top_muxes[] = {
 	/* CLK_CFG_0 */
-	MUX_GATE(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
-		 0x040, 0, 3, 7),
-	MUX_GATE(CLK_TOP_MEM_SEL, "mem_sel", mem_parents,
-		 0x040, 8, 1, 15),
-	MUX_GATE(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents,
-		 0x040, 16, 1, 23),
+	MUX_GATE_FLAGS(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
+		       0x040, 0, 3, 7, CLK_IS_CRITICAL),
+	MUX_GATE_FLAGS(CLK_TOP_MEM_SEL, "mem_sel", mem_parents,
+		       0x040, 8, 1, 15, CLK_IS_CRITICAL),
+	MUX_GATE_FLAGS(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents,
+		       0x040, 16, 1, 23, CLK_IS_CRITICAL),
 	MUX_GATE(CLK_TOP_ETH_SEL, "eth_sel", eth_parents,
 		 0x040, 24, 3, 31),
 
@@ -621,10 +625,6 @@ static int mtk_topckgen_init(struct platform_device *pdev)
 	mtk_clk_register_gates(&pdev->dev, node, top_clks,
 			       ARRAY_SIZE(top_clks), clk_data);
 
-	clk_prepare_enable(clk_data->hws[CLK_TOP_AXI_SEL]->clk);
-	clk_prepare_enable(clk_data->hws[CLK_TOP_MEM_SEL]->clk);
-	clk_prepare_enable(clk_data->hws[CLK_TOP_DDRPHYCFG_SEL]->clk);
-
 	return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
 }
 
@@ -667,9 +667,6 @@ static int mtk_apmixedsys_init(struct platform_device *pdev)
 	mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
 			       ARRAY_SIZE(apmixed_clks), clk_data);
 
-	clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk);
-	clk_prepare_enable(clk_data->hws[CLK_APMIXED_MAIN_CORE_EN]->clk);
-
 	return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
 }
 
@@ -697,8 +694,6 @@ static int mtk_pericfg_init(struct platform_device *pdev)
 	if (r)
 		return r;
 
-	clk_prepare_enable(clk_data->hws[CLK_PERI_UART0_PD]->clk);
-
 	mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc[1]);
 
 	return 0;
Signature · 1 line
2.39.2
author maintainer
#582 lore raw

PATCH 580/694 clk: mediatek: mt8135: Properly use CLK_IS_CRITICAL flag

In reply to Greg Kroah-Hartman

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit f4f9a9c003b52ea3cffda186753bfb3e37b970f8 ]

Instead of calling clk_prepare_enable() for clocks that shall stay enabled, use the CLK_IS_CRITICAL flag, which purpose is exactly that.

---
 drivers/clk/mediatek/clk-mt8135.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/clk/mediatek/clk-mt8135.c +8 -6
index 97a115d2c3daa..a39ad58e27418 100644
@@ -2,6 +2,8 @@
 /*
  * Copyright (c) 2014 MediaTek Inc.
  * Author: James Liao <[email protected]>
+ * Copyright (c) 2023 Collabora, Ltd.
+ *               AngeloGioacchino Del Regno <[email protected]>
  */
 
 #include <linux/clk.h>
@@ -390,7 +392,7 @@ static const struct mtk_composite top_muxes[] __initconst = {
 	MUX_GATE(CLK_TOP_GCPU_SEL, "gcpu_sel", gcpu_parents, 0x0164, 24, 3, 31),
 	/* CLK_CFG_9 */
 	MUX_GATE(CLK_TOP_DPI1_SEL, "dpi1_sel", dpi1_parents, 0x0168, 0, 2, 7),
-	MUX_GATE(CLK_TOP_CCI_SEL, "cci_sel", cci_parents, 0x0168, 8, 3, 15),
+	MUX_GATE_FLAGS(CLK_TOP_CCI_SEL, "cci_sel", cci_parents, 0x0168, 8, 3, 15, CLK_IS_CRITICAL),
 	MUX_GATE(CLK_TOP_APLL_SEL, "apll_sel", apll_parents, 0x0168, 16, 3, 23),
 	MUX_GATE(CLK_TOP_HDMIPLL_SEL, "hdmipll_sel", hdmipll_parents, 0x0168, 24, 2, 31),
 };
@@ -404,6 +406,10 @@ static const struct mtk_gate_regs infra_cg_regs = {
 #define GATE_ICG(_id, _name, _parent, _shift)	\
 	GATE_MTK(_id, _name, _parent, &infra_cg_regs, _shift, &mtk_clk_gate_ops_setclr)
 
+#define GATE_ICG_AO(_id, _name, _parent, _shift)	\
+	GATE_MTK_FLAGS(_id, _name, _parent, &infra_cg_regs, _shift,	\
+		       &mtk_clk_gate_ops_setclr, CLK_IS_CRITICAL)
+
 static const struct mtk_gate infra_clks[] __initconst = {
 	GATE_ICG(CLK_INFRA_PMIC_WRAP, "pmic_wrap_ck", "axi_sel", 23),
 	GATE_ICG(CLK_INFRA_PMICSPI, "pmicspi_ck", "pmicspi_sel", 22),
@@ -411,7 +417,7 @@ static const struct mtk_gate infra_clks[] __initconst = {
 	GATE_ICG(CLK_INFRA_CCIF0_AP_CTRL, "ccif0_ap_ctrl", "axi_sel", 20),
 	GATE_ICG(CLK_INFRA_KP, "kp_ck", "axi_sel", 16),
 	GATE_ICG(CLK_INFRA_CPUM, "cpum_ck", "cpum_tck_in", 15),
-	GATE_ICG(CLK_INFRA_M4U, "m4u_ck", "mem_sel", 8),
+	GATE_ICG_AO(CLK_INFRA_M4U, "m4u_ck", "mem_sel", 8),
 	GATE_ICG(CLK_INFRA_MFGAXI, "mfgaxi_ck", "axi_sel", 7),
 	GATE_ICG(CLK_INFRA_DEVAPC, "devapc_ck", "axi_sel", 6),
 	GATE_ICG(CLK_INFRA_AUDIO, "audio_ck", "aud_intbus_sel", 5),
@@ -534,8 +540,6 @@ static void __init mtk_topckgen_init(struct device_node *node)
 				    ARRAY_SIZE(top_muxes), base,
 				    &mt8135_clk_lock, clk_data);
 
-	clk_prepare_enable(clk_data->hws[CLK_TOP_CCI_SEL]->clk);
-
 	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
 	if (r)
 		pr_err("%s(): could not register clock provider: %d\n",
@@ -553,8 +557,6 @@ static void __init mtk_infrasys_init(struct device_node *node)
 	mtk_clk_register_gates(NULL, node, infra_clks,
 			       ARRAY_SIZE(infra_clks), clk_data);
 
-	clk_prepare_enable(clk_data->hws[CLK_INFRA_M4U]->clk);
-
 	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
 	if (r)
 		pr_err("%s(): could not register clock provider: %d\n",
Signature · 1 line
2.39.2
author maintainer
#583 lore raw

PATCH 581/694 RDMA/rdmavt: Delete unnecessary NULL check

In reply to Greg Kroah-Hartman

From: Natalia Petrova <[email protected]>

[ Upstream commit b73a0b80c69de77d8d4942abb37066531c0169b2 ]

There is no need to check 'rdi->qp_dev' for NULL. The field 'qp_dev' is created in rvt_register_device() which will fail if the 'qp_dev' allocation fails in rvt_driver_qp_init(). Overwise this pointer doesn't changed and passed to rvt_qp_exit() by the next step.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table")
---
 drivers/infiniband/sw/rdmavt/qp.c | 2 --
 1 file changed, 2 deletions(-)
drivers/infiniband/sw/rdmavt/qp.c +0 -2
index 3acab569fbb94..2bdc4486c3daa 100644
@@ -464,8 +464,6 @@ void rvt_qp_exit(struct rvt_dev_info *rdi)
 	if (qps_inuse)
 		rvt_pr_err(rdi, "QP memory leak! %u still in use\n",
 			   qps_inuse);
-	if (!rdi->qp_dev)
-		return;
 
 	kfree(rdi->qp_dev->qp_table);
 	free_qpn_table(&rdi->qp_dev->qpn_table);
Signature · 1 line
2.39.2
author maintainer
#584 lore raw

PATCH 582/694 clk: mediatek: clk-pllfh: fix missing of_node_put() in fhctl_parse_dt()

In reply to Greg Kroah-Hartman

From: Yang Yingliang <[email protected]>

[ Upstream commit f1d97a37f975ac615e4d6875c27516150642d499 ]

The device_node pointer returned by of_find_compatible_node() with refcount incremented, when finish using it, the refcount need be decreased.

Fixes d7964de8a8ea ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
[[email protected]: Also unmap on error]
---
 drivers/clk/mediatek/clk-pllfh.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/clk/mediatek/clk-pllfh.c +9 -2
index f48780bec5077..f135b32c6dbed 100644
@@ -75,13 +75,13 @@ void fhctl_parse_dt(const u8 *compatible_node, struct mtk_pllfh_data *pllfhs,
 	base = of_iomap(node, 0);
 	if (!base) {
 		pr_err("%s(): ioremap failed\n", __func__);
-		return;
+		goto out_node_put;
 	}
 
 	num_clocks = of_clk_get_parent_count(node);
 	if (!num_clocks) {
 		pr_err("%s(): failed to get clocks property\n", __func__);
-		return;
+		goto err;
 	}
 
 	for (i = 0; i < num_clocks; i++) {
@@ -102,6 +102,13 @@ void fhctl_parse_dt(const u8 *compatible_node, struct mtk_pllfh_data *pllfhs,
 		pllfh->state.ssc_rate = ssc_rate;
 		pllfh->state.base = base;
 	}
+
+out_node_put:
+	of_node_put(node);
+	return;
+err:
+	iounmap(base);
+	goto out_node_put;
 }
 
 static void pllfh_init(struct mtk_fh *fh, struct mtk_pllfh_data *pllfh_data)
Signature · 1 line
2.39.2
author maintainer
#585 lore raw

PATCH 583/694 clk: qcom: gcc-qcm2290: Fix up gcc_sdcc2_apps_clk_src

In reply to Greg Kroah-Hartman

From: Konrad Dybcio <[email protected]>

[ Upstream commit 1bf088a9f0e50acd175ba8deef0db11c099fa26e ]

Add the PARENT_ENABLE flag to prevent the clock from getting stuck at boot and use floor_ops to avoid SDHCI overclocking.

Fixes 496d1a13d405 ("clk: qcom: Add Global Clock Controller driver for QCM2290")
---
 drivers/clk/qcom/gcc-qcm2290.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/clk/qcom/gcc-qcm2290.c +2 -1
index 7792b8f237047..096deff2ba257 100644
@@ -1243,7 +1243,8 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
 		.name = "gcc_sdcc2_apps_clk_src",
 		.parent_data = gcc_parents_12,
 		.num_parents = ARRAY_SIZE(gcc_parents_12),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
+		.flags = CLK_OPS_PARENT_ENABLE,
 	},
 };
 
Signature · 1 line
2.39.2
author maintainer
#586 lore raw

PATCH 584/694 workqueue: Fix hung time report of worker pools

In reply to Greg Kroah-Hartman

From: Petr Mladek <[email protected]>

[ Upstream commit 335a42ebb0ca8ee9997a1731aaaae6dcd704c113 ]

The workqueue watchdog prints a warning when there is no progress in a worker pool. Where the progress means that the pool started processing a pending work item.

Note that it is perfectly fine to process work items much longer. The progress should be guaranteed by waking up or creating idle workers.

show_one_worker_pool() prints state of non-idle worker pool. It shows a delay since the last pool->watchdog_ts.

The timestamp is updated when a first pending work is queued in __queue_work(). Also it is updated when a work is dequeued for processing in worker_thread() and rescuer_thread().

The delay is misleading when there is no pending work item. In this case it shows how long the last work item is being proceed. Show zero instead. There is no stall if there is no pending work.

Fixes 82607adcf9cdf40fb7b ("workqueue: implement lockup detector")
---
 kernel/workqueue.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
kernel/workqueue.c +7 -3
index b8b541caed485..2be9b0ecf22ce 100644
@@ -5002,10 +5002,16 @@ static void show_one_worker_pool(struct worker_pool *pool)
 	struct worker *worker;
 	bool first = true;
 	unsigned long flags;
+	unsigned long hung = 0;
 
 	raw_spin_lock_irqsave(&pool->lock, flags);
 	if (pool->nr_workers == pool->nr_idle)
 		goto next_pool;
+
+	/* How long the first pending work is waiting for a worker. */
+	if (!list_empty(&pool->worklist))
+		hung = jiffies_to_msecs(jiffies - pool->watchdog_ts) / 1000;
+
 	/*
 	 * Defer printing to avoid deadlocks in console drivers that
 	 * queue work while holding locks also taken in their write
@@ -5014,9 +5020,7 @@ static void show_one_worker_pool(struct worker_pool *pool)
 	printk_deferred_enter();
 	pr_info("pool %d:", pool->id);
 	pr_cont_pool_info(pool);
-	pr_cont(" hung=%us workers=%d",
-		jiffies_to_msecs(jiffies - pool->watchdog_ts) / 1000,
-		pool->nr_workers);
+	pr_cont(" hung=%lus workers=%d", hung, pool->nr_workers);
 	if (pool->manager)
 		pr_cont(" manager: %d",
 			task_pid_nr(pool->manager->task));
Signature · 1 line
2.39.2
author maintainer
#587 lore raw

PATCH 585/694 rtc: omap: include header for omap_rtc_power_off_program prototype

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit f69c2b5420497b7a54181ce170d682cbeb1f119f ]

Non-static functions should have a prototype:

drivers/rtc/rtc-omap.c:410:5: error: no previous prototype for ‘omap_rtc_power_off_program’ [-Werror=missing-prototypes]

Fixes 6256f7f7f217 ("rtc: OMAP: Add support for rtc-only mode")
---
 drivers/rtc/rtc-omap.c | 1 +
 1 file changed, 1 insertion(+)
drivers/rtc/rtc-omap.c +1 -0
index 4d4f3b1a73093..73634a3ccfd3b 100644
@@ -25,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/rtc.h>
+#include <linux/rtc/rtc-omap.h>
 
 /*
  * The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock
Signature · 1 line
2.39.2
author maintainer
#588 lore raw

PATCH 586/694 RDMA/mlx4: Prevent shift wrapping in set_user_sq_size()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit d50b3c73f1ac20dabc53dc6e9d64ce9c79a331eb ]

The ucmd->log_sq_bb_count variable is controlled by the user so this shift can wrap. Fix it by using check_shl_overflow() in the same way that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined behavior in hns_roce_set_user_sq_size()").

Fixes 839041329fd3 ("IB/mlx4: Sanity check userspace send queue sizes")
---
 drivers/infiniband/hw/mlx4/qp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx4/qp.c +6 -2
index 884825b2e5f77..456656617c33f 100644
@@ -447,9 +447,13 @@ static int set_user_sq_size(struct mlx4_ib_dev *dev,
 			    struct mlx4_ib_qp *qp,
 			    struct mlx4_ib_create_qp *ucmd)
 {
+	u32 cnt;
+
 	/* Sanity check SQ size before proceeding */
-	if ((1 << ucmd->log_sq_bb_count) > dev->dev->caps.max_wqes	 ||
-	    ucmd->log_sq_stride >
+	if (check_shl_overflow(1, ucmd->log_sq_bb_count, &cnt) ||
+	    cnt > dev->dev->caps.max_wqes)
+		return -EINVAL;
+	if (ucmd->log_sq_stride >
 		ilog2(roundup_pow_of_two(dev->dev->caps.max_sq_desc_sz)) ||
 	    ucmd->log_sq_stride < MLX4_IB_MIN_SQ_STRIDE)
 		return -EINVAL;
Signature · 1 line
2.39.2
author maintainer
#589 lore raw

PATCH 587/694 rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time

In reply to Greg Kroah-Hartman

From: Martin Blumenstingl <[email protected]>

[ Upstream commit 0e6255fa3f649170da6bd1a544680589cfae1131 ]

The VRTC alarm register can be programmed with an amount of seconds after which the SoC will be woken up by the VRTC timer again. We are already converting the alarm time from meson_vrtc_set_alarm() to "seconds since 1970". This means we also need to use "seconds since 1970" for the current time.

This fixes a problem where setting the alarm to one minute in the future results in the firmware (which handles wakeup) to output (on the serial console) that the system will be woken up in billions of seconds. ktime_get_raw_ts64() returns the time since boot, not since 1970. Switch to ktime_get_real_ts64() to fix the calculation of the alarm time and to make the SoC wake up at the specified date/time. Also the firmware (which manages suspend) now prints either 59 or 60 seconds until wakeup (depending on how long it takes for the system to enter suspend).

---
 drivers/rtc/rtc-meson-vrtc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/rtc/rtc-meson-vrtc.c +2 -2
index 1463c86215615..648fa362ec447 100644
@@ -23,7 +23,7 @@ static int meson_vrtc_read_time(struct device *dev, struct rtc_time *tm)
 	struct timespec64 time;
 
 	dev_dbg(dev, "%s\n", __func__);
-	ktime_get_raw_ts64(&time);
+	ktime_get_real_ts64(&time);
 	rtc_time64_to_tm(time.tv_sec, tm);
 
 	return 0;
@@ -96,7 +96,7 @@ static int __maybe_unused meson_vrtc_suspend(struct device *dev)
 		long alarm_secs;
 		struct timespec64 time;
 
-		ktime_get_raw_ts64(&time);
+		ktime_get_real_ts64(&time);
 		local_time = time.tv_sec;
 
 		dev_dbg(dev, "alarm_time = %lus, local_time=%lus\n",
Signature · 1 line
2.39.2
author maintainer
#590 lore raw

PATCH 588/694 rtc: k3: handle errors while enabling wake irq

In reply to Greg Kroah-Hartman

From: Dhruva Gole <[email protected]>

[ Upstream commit d31d7300ebc0c43021ec48c0e6a3a427386f4617 ]

Due to the potential failure of enable_irq_wake(), it would be better to return error if it fails.

---
 drivers/rtc/rtc-ti-k3.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/rtc/rtc-ti-k3.c +2 -1
index ba23163cc0428..0d90fe9233550 100644
@@ -632,7 +632,8 @@ static int __maybe_unused ti_k3_rtc_suspend(struct device *dev)
 	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
 
 	if (device_may_wakeup(dev))
-		enable_irq_wake(priv->irq);
+		return enable_irq_wake(priv->irq);
+
 	return 0;
 }
 
Signature · 1 line
2.39.2
author maintainer
#591 lore raw

PATCH 589/694 RDMA/rxe: Replace exists by rxe in rxe.c

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit 9168d125ea032ad199275193493c13cb077da5cc ]

'exists' looks like a boolean. This patch replaces it by the normal name used for the rxe device, 'rxe', which should be a little less confusing. The second rxe_dbg() message is incorrect since rxe is known to be NULL and this will cause a seg fault if this message were ever sent. Replace it by pr_debug for the moment.

Fixes c6aba5ea0055 ("RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe.c")
---
 drivers/infiniband/sw/rxe/rxe.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/infiniband/sw/rxe/rxe.c +6 -6
index 136c2efe34660..a3f05fdd9fac2 100644
@@ -175,7 +175,7 @@ int rxe_add(struct rxe_dev *rxe, unsigned int mtu, const char *ibdev_name)
 
 static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 {
-	struct rxe_dev *exists;
+	struct rxe_dev *rxe;
 	int err = 0;
 
 	if (is_vlan_dev(ndev)) {
@@ -184,17 +184,17 @@ static int rxe_newlink(const char *ibdev_name, struct net_device *ndev)
 		goto err;
 	}
 
-	exists = rxe_get_dev_from_net(ndev);
-	if (exists) {
-		ib_device_put(&exists->ib_dev);
-		rxe_dbg(exists, "already configured on %s\n", ndev->name);
+	rxe = rxe_get_dev_from_net(ndev);
+	if (rxe) {
+		ib_device_put(&rxe->ib_dev);
+		rxe_dbg(rxe, "already configured on %s\n", ndev->name);
 		err = -EEXIST;
 		goto err;
 	}
 
 	err = rxe_net_add(ibdev_name, ndev);
 	if (err) {
-		rxe_dbg(exists, "failed to add %s\n", ndev->name);
+		pr_debug("failed to add %s\n", ndev->name);
 		goto err;
 	}
 err:
Signature · 1 line
2.39.2
author maintainer
#592 lore raw

PATCH 590/694 RDMA/erdma: Use fixed hardware page size

In reply to Greg Kroah-Hartman

From: Cheng Xu <[email protected]>

[ Upstream commit d649c638dc26f3501da510cf7fceb5c15ca54258 ]

Hardware's page size is 4096, but the kernel's page size may vary. Driver should use hardware's page size when communicating with hardware.

Fixes 155055771704 ("RDMA/erdma: Add verbs implementation")
---
 drivers/infiniband/hw/erdma/erdma_hw.h    |  4 ++++
 drivers/infiniband/hw/erdma/erdma_verbs.c | 17 +++++++++--------
 2 files changed, 13 insertions(+), 8 deletions(-)
drivers/infiniband/hw/erdma/erdma_hw.h +4 -0
index 37ad1bb1917c4..76ce2856be28a 100644
@@ -112,6 +112,10 @@
 
 #define ERDMA_PAGE_SIZE_SUPPORT 0x7FFFF000
 
+/* Hardware page size definition */
+#define ERDMA_HW_PAGE_SHIFT 12
+#define ERDMA_HW_PAGE_SIZE 4096
+
 /* WQE related. */
 #define EQE_SIZE 16
 #define EQE_SHIFT 4
drivers/infiniband/hw/erdma/erdma_verbs.c +9 -8
index 9c30d78730aa1..83e1b0d559771 100644
@@ -38,7 +38,7 @@ static int create_qp_cmd(struct erdma_dev *dev, struct erdma_qp *qp)
 		   FIELD_PREP(ERDMA_CMD_CREATE_QP_PD_MASK, pd->pdn);
 
 	if (rdma_is_kernel_res(&qp->ibqp.res)) {
-		u32 pgsz_range = ilog2(SZ_1M) - PAGE_SHIFT;
+		u32 pgsz_range = ilog2(SZ_1M) - ERDMA_HW_PAGE_SHIFT;
 
 		req.sq_cqn_mtt_cfg =
 			FIELD_PREP(ERDMA_CMD_CREATE_QP_PAGE_SIZE_MASK,
@@ -66,13 +66,13 @@ static int create_qp_cmd(struct erdma_dev *dev, struct erdma_qp *qp)
 		user_qp = &qp->user_qp;
 		req.sq_cqn_mtt_cfg = FIELD_PREP(
 			ERDMA_CMD_CREATE_QP_PAGE_SIZE_MASK,
-			ilog2(user_qp->sq_mtt.page_size) - PAGE_SHIFT);
+			ilog2(user_qp->sq_mtt.page_size) - ERDMA_HW_PAGE_SHIFT);
 		req.sq_cqn_mtt_cfg |=
 			FIELD_PREP(ERDMA_CMD_CREATE_QP_CQN_MASK, qp->scq->cqn);
 
 		req.rq_cqn_mtt_cfg = FIELD_PREP(
 			ERDMA_CMD_CREATE_QP_PAGE_SIZE_MASK,
-			ilog2(user_qp->rq_mtt.page_size) - PAGE_SHIFT);
+			ilog2(user_qp->rq_mtt.page_size) - ERDMA_HW_PAGE_SHIFT);
 		req.rq_cqn_mtt_cfg |=
 			FIELD_PREP(ERDMA_CMD_CREATE_QP_CQN_MASK, qp->rcq->cqn);
 
@@ -162,7 +162,7 @@ static int create_cq_cmd(struct erdma_dev *dev, struct erdma_cq *cq)
 	if (rdma_is_kernel_res(&cq->ibcq.res)) {
 		page_size = SZ_32M;
 		req.cfg0 |= FIELD_PREP(ERDMA_CMD_CREATE_CQ_PAGESIZE_MASK,
-				       ilog2(page_size) - PAGE_SHIFT);
+				       ilog2(page_size) - ERDMA_HW_PAGE_SHIFT);
 		req.qbuf_addr_l = lower_32_bits(cq->kern_cq.qbuf_dma_addr);
 		req.qbuf_addr_h = upper_32_bits(cq->kern_cq.qbuf_dma_addr);
 
@@ -175,8 +175,9 @@ static int create_cq_cmd(struct erdma_dev *dev, struct erdma_cq *cq)
 			cq->kern_cq.qbuf_dma_addr + (cq->depth << CQE_SHIFT);
 	} else {
 		mtt = &cq->user_cq.qbuf_mtt;
-		req.cfg0 |= FIELD_PREP(ERDMA_CMD_CREATE_CQ_PAGESIZE_MASK,
-				       ilog2(mtt->page_size) - PAGE_SHIFT);
+		req.cfg0 |=
+			FIELD_PREP(ERDMA_CMD_CREATE_CQ_PAGESIZE_MASK,
+				   ilog2(mtt->page_size) - ERDMA_HW_PAGE_SHIFT);
 		if (mtt->mtt_nents == 1) {
 			req.qbuf_addr_l = lower_32_bits(*(u64 *)mtt->mtt_buf);
 			req.qbuf_addr_h = upper_32_bits(*(u64 *)mtt->mtt_buf);
@@ -636,7 +637,7 @@ static int init_user_qp(struct erdma_qp *qp, struct erdma_ucontext *uctx,
 	u32 rq_offset;
 	int ret;
 
-	if (len < (PAGE_ALIGN(qp->attrs.sq_size * SQEBB_SIZE) +
+	if (len < (ALIGN(qp->attrs.sq_size * SQEBB_SIZE, ERDMA_HW_PAGE_SIZE) +
 		   qp->attrs.rq_size * RQE_SIZE))
 		return -EINVAL;
 
@@ -646,7 +647,7 @@ static int init_user_qp(struct erdma_qp *qp, struct erdma_ucontext *uctx,
 	if (ret)
 		return ret;
 
-	rq_offset = PAGE_ALIGN(qp->attrs.sq_size << SQEBB_SHIFT);
+	rq_offset = ALIGN(qp->attrs.sq_size << SQEBB_SHIFT, ERDMA_HW_PAGE_SIZE);
 	qp->user_qp.rq_offset = rq_offset;
 
 	ret = get_mtt_entries(qp->dev, &qp->user_qp.rq_mtt, va + rq_offset,
Signature · 1 line
2.39.2
author maintainer
#593 lore raw

PATCH 591/694 fs/ntfs3: Fix memory leak if ntfs_read_mft failed

In reply to Greg Kroah-Hartman

From: Chen Zhongjin <[email protected]>

[ Upstream commit bfa434c60157c9793e9b12c9b68ade02aff9f803 ]

Label ATTR_ROOT in ntfs_read_mft() sets is_root = true and ni->ni_flags |= NI_FLAG_DIR, then next attr will goto label ATTR_ALLOC and alloc ni->dir.alloc_run. However two states are not always consistent and can make memory leak.

1) attr_name in ATTR_ROOT does not fit the condition it will set is_root = true but NI_FLAG_DIR is not set.
2) next attr_name in ATTR_ALLOC fits the condition and alloc ni->dir.alloc_run
3) in cleanup function ni_clear(), when NI_FLAG_DIR is set, it frees ni->dir.alloc_run, otherwise it frees ni->file.run
4) because NI_FLAG_DIR is not set in this case, ni->dir.alloc_run is leaked as kmemleak reported:

unreferenced object 0xffff888003bc5480 (size 64):
backtrace:

    [<000000003d42e6b0>] __kmalloc_node+0x4e/0x1c0
    [<00000000d8e19b8a>] kvmalloc_node+0x39/0x1f0
    [<00000000fc3eb5b8>] run_add_entry+0x18a/0xa40 [ntfs3]
    [<0000000011c9f978>] run_unpack+0x75d/0x8e0 [ntfs3]
    [<00000000e7cf1819>] run_unpack_ex+0xbc/0x500 [ntfs3]
    [<00000000bbf0a43d>] ntfs_iget5+0xb25/0x2dd0 [ntfs3]
    [<00000000a6e50693>] ntfs_fill_super+0x218d/0x3580 [ntfs3]
    [<00000000b9170608>] get_tree_bdev+0x3fb/0x710
    [<000000004833798a>] vfs_get_tree+0x8e/0x280
    [<000000006e20b8e6>] path_mount+0xf3c/0x1930
    [<000000007bf15a5f>] do_mount+0xf3/0x110
    ...

Fix this by always setting is_root and NI_FLAG_DIR together.

Fixes 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
---
 fs/ntfs3/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ntfs3/inode.c +1 -1
index 309d9b46b5d5c..ce6bb3bd86b6e 100644
@@ -259,7 +259,6 @@ static struct inode *ntfs_read_mft(struct inode *inode,
 			goto out;
 
 		root = Add2Ptr(attr, roff);
-		is_root = true;
 
 		if (attr->name_len != ARRAY_SIZE(I30_NAME) ||
 		    memcmp(attr_name(attr), I30_NAME, sizeof(I30_NAME)))
@@ -272,6 +271,7 @@ static struct inode *ntfs_read_mft(struct inode *inode,
 		if (!is_dir)
 			goto next_attr;
 
+		is_root = true;
 		ni->ni_flags |= NI_FLAG_DIR;
 
 		err = indx_init(&ni->dir, sbi, attr, INDEX_MUTEX_I30);
Signature · 1 line
2.39.2
author maintainer
#594 lore raw

PATCH 592/694 fs/ntfs3: Add check for kmemdup

In reply to Greg Kroah-Hartman

From: Jiasheng Jiang <[email protected]>

[ Upstream commit e6c3cef24cb0d045f99d5cb039b344874e3cfd74 ]

Since the kmemdup may return NULL pointer,
it should be better to add check for the return value in order to avoid NULL pointer dereference.

Fixes b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
---
 fs/ntfs3/fslog.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/ntfs3/fslog.c +4 -0
index c6eb371a36951..dc723f03d6bb2 100644
@@ -4256,6 +4256,10 @@ int log_replay(struct ntfs_inode *ni, bool *initialized)
 	rec_len -= t32;
 
 	attr_names = kmemdup(Add2Ptr(lrh, t32), rec_len, GFP_NOFS);
+	if (!attr_names) {
+		err = -ENOMEM;
+		goto out;
+	}
 
 	lcb_put(lcb);
 	lcb = NULL;
Signature · 1 line
2.39.2
author maintainer
#595 lore raw

PATCH 593/694 fs/ntfs3: Fix null-ptr-deref on inode->i_op in ntfs_lookup()

In reply to Greg Kroah-Hartman

From: ZhangPeng <[email protected]>

[ Upstream commit 254e69f284d7270e0abdc023ee53b71401c3ba0c ]

Syzbot reported a null-ptr-deref bug:

ntfs3: loop0: Different NTFS' sector size (1024) and media sector size
(512)
ntfs3: loop0: Mark volume as dirty due to NTFS errors

general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:d_flags_for_inode fs/dcache.c:1980 [inline]
RIP: 0010:__d_add+0x5ce/0x800 fs/dcache.c:2796
Call Trace:
 <TASK>
 d_splice_alias+0x122/0x3b0 fs/dcache.c:3191
 lookup_open fs/namei.c:3391 [inline]
 open_last_lookups fs/namei.c:3481 [inline]
 path_openat+0x10e6/0x2df0 fs/namei.c:3688
 do_filp_open+0x264/0x4f0 fs/namei.c:3718
 do_sys_openat2+0x124/0x4e0 fs/open.c:1310
 do_sys_open fs/open.c:1326 [inline]
 __do_sys_open fs/open.c:1334 [inline]
 __se_sys_open fs/open.c:1330 [inline]
 __x64_sys_open+0x221/0x270 fs/open.c:1330
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

If the MFT record of ntfs inode is not a base record, inode->i_op can be NULL. And a null-ptr-deref may happen:

ntfs_lookup()

    dir_search_u() # inode->i_op is set to NULL
    d_splice_alias()
        __d_add()
            d_flags_for_inode() # inode->i_op->get_link null-ptr-deref

Fix this by adding a Check on inode->i_op before calling the d_splice_alias() function.

Fixes 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Reported-by [email protected]
---
 fs/ntfs3/namei.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
fs/ntfs3/namei.c +10 -0
index 407fe92394e22..8d206770d8c6d 100644
@@ -88,6 +88,16 @@ static struct dentry *ntfs_lookup(struct inode *dir, struct dentry *dentry,
 		__putname(uni);
 	}
 
+	/*
+	 * Check for a null pointer
+	 * If the MFT record of ntfs inode is not a base record, inode->i_op can be NULL.
+	 * This causes null pointer dereference in d_splice_alias().
+	 */
+	if (!IS_ERR(inode) && inode->i_op == NULL) {
+		iput(inode);
+		inode = ERR_PTR(-EINVAL);
+	}
+
 	return d_splice_alias(inode, dentry);
 }
 
Signature · 1 line
2.39.2
author maintainer
#596 lore raw

PATCH 594/694 fs/ntfs3: Fix OOB read in indx_insert_into_buffer

In reply to Greg Kroah-Hartman

From: ZhangPeng <[email protected]>

[ Upstream commit b8c44949044e5f7f864525fdffe8e95135ce9ce5 ]

Syzbot reported a OOB read bug:

BUG: KASAN: slab-out-of-bounds in indx_insert_into_buffer+0xaa3/0x13b0
fs/ntfs3/index.c:1755
Read of size 17168 at addr ffff8880255e06c0 by task syz-executor308/3630

Call Trace:
 <TASK>
 memmove+0x25/0x60 mm/kasan/shadow.c:54
 indx_insert_into_buffer+0xaa3/0x13b0 fs/ntfs3/index.c:1755
 indx_insert_entry+0x446/0x6b0 fs/ntfs3/index.c:1863
 ntfs_create_inode+0x1d3f/0x35c0 fs/ntfs3/inode.c:1548
 ntfs_create+0x3e/0x60 fs/ntfs3/namei.c:100
 lookup_open fs/namei.c:3413 [inline]

If the member struct INDEX_BUFFER *index of struct indx_node is incorrect, that is, the value of __le32 used is greater than the value of __le32 total in struct INDEX_HDR. Therefore, OOB read occurs when memmove is called in indx_insert_into_buffer().
Fix this by adding a check in hdr_find_e().

Fixes 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-by [email protected]
---
 fs/ntfs3/index.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/ntfs3/index.c +4 -0
index 51ab759546403..ae9616becec15 100644
@@ -725,9 +725,13 @@ static struct NTFS_DE *hdr_find_e(const struct ntfs_index *indx,
 	u32 e_size, e_key_len;
 	u32 end = le32_to_cpu(hdr->used);
 	u32 off = le32_to_cpu(hdr->de_off);
+	u32 total = le32_to_cpu(hdr->total);
 	u16 offs[128];
 
 fill_table:
+	if (end > total)
+		return NULL;
+
 	if (off + sizeof(struct NTFS_DE) > end)
 		return NULL;
 
Signature · 1 line
2.39.2
author maintainer
#597 lore raw

PATCH 595/694 fs/ntfs3: Fix slab-out-of-bounds read in hdr_delete_de()

In reply to Greg Kroah-Hartman

From: Zeng Heng <[email protected]>

[ Upstream commit ab84eee4c7ab929996602eda7832854c35a6dda2 ]

Here is a BUG report from syzbot:

BUG: KASAN: slab-out-of-bounds in hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806
Read of size 16842960 at addr ffff888079cc0600 by task syz-executor934/3631

Call Trace:
 memmove+0x25/0x60 mm/kasan/shadow.c:54
 hdr_delete_de+0xe0/0x150 fs/ntfs3/index.c:806
 indx_delete_entry+0x74f/0x3670 fs/ntfs3/index.c:2193
 ni_remove_name+0x27a/0x980 fs/ntfs3/frecord.c:2910
 ntfs_unlink_inode+0x3d4/0x720 fs/ntfs3/inode.c:1712
 ntfs_rename+0x41a/0xcb0 fs/ntfs3/namei.c:276

Before using the meta-data in struct INDEX_HDR, we need to check index header valid or not. Otherwise, the corruptedi (or malicious) fs image can cause out-of-bounds access which could make kernel panic.

Fixes 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-by [email protected]
---
 fs/ntfs3/fslog.c   | 2 +-
 fs/ntfs3/index.c   | 4 ++++
 fs/ntfs3/ntfs_fs.h | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)
fs/ntfs3/fslog.c +1 -1
index dc723f03d6bb2..bf73964472845 100644
@@ -2575,7 +2575,7 @@ static int read_next_log_rec(struct ntfs_log *log, struct lcb *lcb, u64 *lsn)
 	return find_log_rec(log, *lsn, lcb);
 }
 
-static inline bool check_index_header(const struct INDEX_HDR *hdr, size_t bytes)
+bool check_index_header(const struct INDEX_HDR *hdr, size_t bytes)
 {
 	__le16 mask;
 	u32 min_de, de_off, used, total;
fs/ntfs3/index.c +4 -0
index ae9616becec15..7a1e01a2ed9ae 100644
@@ -848,6 +848,10 @@ static inline struct NTFS_DE *hdr_delete_de(struct INDEX_HDR *hdr,
 	u32 off = PtrOffset(hdr, re);
 	int bytes = used - (off + esize);
 
+	/* check INDEX_HDR valid before using INDEX_HDR */
+	if (!check_index_header(hdr, le32_to_cpu(hdr->total)))
+		return NULL;
+
 	if (off >= used || esize < sizeof(struct NTFS_DE) ||
 	    bytes < sizeof(struct NTFS_DE))
 		return NULL;
fs/ntfs3/ntfs_fs.h +1 -0
index 80072e5f96f70..15296f5690b5a 100644
@@ -581,6 +581,7 @@ int ni_rename(struct ntfs_inode *dir_ni, struct ntfs_inode *new_dir_ni,
 bool ni_is_dirty(struct inode *inode);
 
 /* Globals from fslog.c */
+bool check_index_header(const struct INDEX_HDR *hdr, size_t bytes);
 int log_replay(struct ntfs_inode *ni, bool *initialized);
 
 /* Globals from fsntfs.c */
Signature · 1 line
2.39.2
author maintainer
#598 lore raw

PATCH 596/694 iommu/mediatek: Set dma_mask for PGTABLE_PA_35_EN

In reply to Greg Kroah-Hartman

From: Yong Wu <[email protected]>

[ Upstream commit f045e9df6537175d02565f21616ac1a9dd59b61c ]

When we enable PGTABLE_PA_35_EN, the PA for pgtable may be 35bits. Thus add dma_mask for it.

---
 drivers/iommu/mtk_iommu.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/iommu/mtk_iommu.c +8 -0
index d5a4955910ff5..6a00ce208dc2b 100644
@@ -1258,6 +1258,14 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 			return PTR_ERR(data->bclk);
 	}
 
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, PGTABLE_PA_35_EN)) {
+		ret = dma_set_mask(dev, DMA_BIT_MASK(35));
+		if (ret) {
+			dev_err(dev, "Failed to set dma_mask 35.\n");
+			return ret;
+		}
+	}
+
 	pm_runtime_enable(dev);
 
 	if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
Signature · 1 line
2.39.2
author maintainer
#599 lore raw

PATCH 597/694 RDMA/rxe: Remove tasklet call from rxe_cq.c

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit 78b26a335310a097d6b22581b706050db42f196c ]

Remove the tasklet call in rxe_cq.c and also the is_dying in the cq struct. There is no reason for the rxe driver to defer the call to the cq completion handler by scheduling a tasklet. rxe_cq_post() is not called in a hard irq context.

The rxe driver currently is incorrect because the tasklet call is made without protecting the cq pointer with a reference from having the underlying memory freed before the deferred routine is called. Executing the comp_handler inline fixes this problem.

---
 drivers/infiniband/sw/rxe/rxe_cq.c    |   32 +++-----------------------------
 drivers/infiniband/sw/rxe/rxe_verbs.c |    2 --
 drivers/infiniband/sw/rxe/rxe_verbs.h |    2 --
 3 files changed, 3 insertions(+), 33 deletions(-)
drivers/infiniband/sw/rxe/rxe_cq.c +3 -29
@@ -39,21 +39,6 @@ err1:
 	return -EINVAL;
 }
 
-static void rxe_send_complete(struct tasklet_struct *t)
-{
-	struct rxe_cq *cq = from_tasklet(cq, t, comp_task);
-	unsigned long flags;
-
-	spin_lock_irqsave(&cq->cq_lock, flags);
-	if (cq->is_dying) {
-		spin_unlock_irqrestore(&cq->cq_lock, flags);
-		return;
-	}
-	spin_unlock_irqrestore(&cq->cq_lock, flags);
-
-	cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context);
-}
-
 int rxe_cq_from_init(struct rxe_dev *rxe, struct rxe_cq *cq, int cqe,
 		     int comp_vector, struct ib_udata *udata,
 		     struct rxe_create_cq_resp __user *uresp)
@@ -79,10 +64,6 @@ int rxe_cq_from_init(struct rxe_dev *rxe
 
 	cq->is_user = uresp;
 
-	cq->is_dying = false;
-
-	tasklet_setup(&cq->comp_task, rxe_send_complete);
-
 	spin_lock_init(&cq->cq_lock);
 	cq->ibcq.cqe = cqe;
 	return 0;
@@ -103,6 +84,7 @@ int rxe_cq_resize_queue(struct rxe_cq *c
 	return err;
 }
 
+/* caller holds reference to cq */
 int rxe_cq_post(struct rxe_cq *cq, struct rxe_cqe *cqe, int solicited)
 {
 	struct ib_event ev;
@@ -135,21 +117,13 @@ int rxe_cq_post(struct rxe_cq *cq, struc
 	if ((cq->notify == IB_CQ_NEXT_COMP) ||
 	    (cq->notify == IB_CQ_SOLICITED && solicited)) {
 		cq->notify = 0;
-		tasklet_schedule(&cq->comp_task);
+
+		cq->ibcq.comp_handler(&cq->ibcq, cq->ibcq.cq_context);
 	}
 
 	return 0;
 }
 
-void rxe_cq_disable(struct rxe_cq *cq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cq->cq_lock, flags);
-	cq->is_dying = true;
-	spin_unlock_irqrestore(&cq->cq_lock, flags);
-}
-
 void rxe_cq_cleanup(struct rxe_pool_elem *elem)
 {
 	struct rxe_cq *cq = container_of(elem, typeof(*cq), elem);
drivers/infiniband/sw/rxe/rxe_verbs.c +0 -2
@@ -786,8 +786,6 @@ static int rxe_destroy_cq(struct ib_cq *
 	if (atomic_read(&cq->num_wq))
 		return -EINVAL;
 
-	rxe_cq_disable(cq);
-
 	rxe_cleanup(cq);
 	return 0;
 }
drivers/infiniband/sw/rxe/rxe_verbs.h +0 -2
@@ -63,9 +63,7 @@ struct rxe_cq {
 	struct rxe_queue	*queue;
 	spinlock_t		cq_lock;
 	u8			notify;
-	bool			is_dying;
 	bool			is_user;
-	struct tasklet_struct	comp_task;
 	atomic_t		num_wq;
 };
 
author maintainer
#600 lore raw

PATCH 598/694 power: supply: generic-adc-battery: fix unit scaling

In reply to Greg Kroah-Hartman

From: Sebastian Reichel <[email protected]>

[ Upstream commit 44263f50065969f2344808388bd589740f026167 ]

power-supply properties are reported in µV, µA and µW. The IIO API provides mV, mA, mW, so the values need to be multiplied by 1000.

Fixes e60fea794e6e ("power: battery: Generic battery driver using IIO")
---
 drivers/power/supply/generic-adc-battery.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/power/supply/generic-adc-battery.c +3 -0
index 66039c665dd1e..0af536f4932f1 100644
@@ -135,6 +135,9 @@ static int read_channel(struct gab *adc_bat, enum power_supply_property psp,
 			result);
 	if (ret < 0)
 		pr_err("read channel error\n");
+	else
+		*result *= 1000;
+
 	return ret;
 }
 
Signature · 1 line
2.39.2
author maintainer
#601 lore raw

PATCH 599/694 clk: add missing of_node_put() in "assigned-clocks" property parsing

In reply to Greg Kroah-Hartman

From: Clément Léger <[email protected]>

[ Upstream commit 27a6e1b09a782517fddac91259970ac466a3f7b6 ]

When returning from of_parse_phandle_with_args(), the np member of the of_phandle_args structure should be put after usage. Add missing of_node_put() calls in both __set_clk_parents() and __set_clk_rates().

Fixes 86be408bfbd8 ("clk: Support for clock parents and rates assigned from device tree")
---
 drivers/clk/clk-conf.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/clk/clk-conf.c +10 -2
index 2ef819606c417..1a4e6340f95ce 100644
@@ -33,9 +33,12 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
 			else
 				return rc;
 		}
-		if (clkspec.np == node && !clk_supplier)
+		if (clkspec.np == node && !clk_supplier) {
+			of_node_put(clkspec.np);
 			return 0;
+		}
 		pclk = of_clk_get_from_provider(&clkspec);
+		of_node_put(clkspec.np);
 		if (IS_ERR(pclk)) {
 			if (PTR_ERR(pclk) != -EPROBE_DEFER)
 				pr_warn("clk: couldn't get parent clock %d for %pOF\n",
@@ -48,10 +51,12 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier)
 		if (rc < 0)
 			goto err;
 		if (clkspec.np == node && !clk_supplier) {
+			of_node_put(clkspec.np);
 			rc = 0;
 			goto err;
 		}
 		clk = of_clk_get_from_provider(&clkspec);
+		of_node_put(clkspec.np);
 		if (IS_ERR(clk)) {
 			if (PTR_ERR(clk) != -EPROBE_DEFER)
 				pr_warn("clk: couldn't get assigned clock %d for %pOF\n",
@@ -93,10 +98,13 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier)
 				else
 					return rc;
 			}
-			if (clkspec.np == node && !clk_supplier)
+			if (clkspec.np == node && !clk_supplier) {
+				of_node_put(clkspec.np);
 				return 0;
+			}
 
 			clk = of_clk_get_from_provider(&clkspec);
+			of_node_put(clkspec.np);
 			if (IS_ERR(clk)) {
 				if (PTR_ERR(clk) != -EPROBE_DEFER)
 					pr_warn("clk: couldn't get clock %d for %pOF\n",
Signature · 1 line
2.39.2
author maintainer
#602 lore raw

PATCH 600/694 RDMA/siw: Remove namespace check from siw_netdev_event()

In reply to Greg Kroah-Hartman

From: Tetsuo Handa <[email protected]>

[ Upstream commit 266e9b3475ba82212062771fdbc40be0e3c06ec8 ]

syzbot is reporting that siw_netdev_event(NETDEV_UNREGISTER) cannot destroy siw_device created after unshare(CLONE_NEWNET) due to net namespace check. It seems that this check was by error there and should be removed.

---
 drivers/infiniband/sw/siw/siw_main.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/infiniband/sw/siw/siw_main.c +0 -3
index dacc174604bf2..65b5cda5457ba 100644
@@ -437,9 +437,6 @@ static int siw_netdev_event(struct notifier_block *nb, unsigned long event,
 
 	dev_dbg(&netdev->dev, "siw: event %lu\n", event);
 
-	if (dev_net(netdev) != &init_net)
-		return NOTIFY_OK;
-
 	base_dev = ib_device_get_by_netdev(netdev, RDMA_DRIVER_SIW);
 	if (!base_dev)
 		return NOTIFY_OK;
Signature · 1 line
2.39.2
author maintainer
#603 lore raw

PATCH 601/694 clk: qcom: gcc-sm6115: Mark RCGs shared where applicable

In reply to Greg Kroah-Hartman

From: Konrad Dybcio <[email protected]>

[ Upstream commit 996c32b745a15a637e8244a25f06b74acce98976 ]

The vast majority of shared RCGs were not marked as such. Fix it.

Fixes cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
---
 drivers/clk/qcom/gcc-sm6115.c | 50 +++++++++++++++++------------------
 1 file changed, 25 insertions(+), 25 deletions(-)
drivers/clk/qcom/gcc-sm6115.c +25 -25
index 5b8222fea2f71..5f09aefa7fb92 100644
@@ -694,7 +694,7 @@ static struct clk_rcg2 gcc_camss_axi_clk_src = {
 		.parent_data = gcc_parents_7,
 		.num_parents = ARRAY_SIZE(gcc_parents_7),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -715,7 +715,7 @@ static struct clk_rcg2 gcc_camss_cci_clk_src = {
 		.parent_data = gcc_parents_9,
 		.num_parents = ARRAY_SIZE(gcc_parents_9),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -738,7 +738,7 @@ static struct clk_rcg2 gcc_camss_csi0phytimer_clk_src = {
 		.parent_data = gcc_parents_4,
 		.num_parents = ARRAY_SIZE(gcc_parents_4),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -753,7 +753,7 @@ static struct clk_rcg2 gcc_camss_csi1phytimer_clk_src = {
 		.parent_data = gcc_parents_4,
 		.num_parents = ARRAY_SIZE(gcc_parents_4),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -768,7 +768,7 @@ static struct clk_rcg2 gcc_camss_csi2phytimer_clk_src = {
 		.parent_data = gcc_parents_4,
 		.num_parents = ARRAY_SIZE(gcc_parents_4),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -790,7 +790,7 @@ static struct clk_rcg2 gcc_camss_mclk0_clk_src = {
 		.parent_data = gcc_parents_3,
 		.num_parents = ARRAY_SIZE(gcc_parents_3),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -805,7 +805,7 @@ static struct clk_rcg2 gcc_camss_mclk1_clk_src = {
 		.parent_data = gcc_parents_3,
 		.num_parents = ARRAY_SIZE(gcc_parents_3),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -820,7 +820,7 @@ static struct clk_rcg2 gcc_camss_mclk2_clk_src = {
 		.parent_data = gcc_parents_3,
 		.num_parents = ARRAY_SIZE(gcc_parents_3),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -835,7 +835,7 @@ static struct clk_rcg2 gcc_camss_mclk3_clk_src = {
 		.parent_data = gcc_parents_3,
 		.num_parents = ARRAY_SIZE(gcc_parents_3),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -857,7 +857,7 @@ static struct clk_rcg2 gcc_camss_ope_ahb_clk_src = {
 		.parent_data = gcc_parents_8,
 		.num_parents = ARRAY_SIZE(gcc_parents_8),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -881,7 +881,7 @@ static struct clk_rcg2 gcc_camss_ope_clk_src = {
 		.parent_data = gcc_parents_8,
 		.num_parents = ARRAY_SIZE(gcc_parents_8),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -916,7 +916,7 @@ static struct clk_rcg2 gcc_camss_tfe_0_clk_src = {
 		.parent_data = gcc_parents_5,
 		.num_parents = ARRAY_SIZE(gcc_parents_5),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -941,7 +941,7 @@ static struct clk_rcg2 gcc_camss_tfe_0_csid_clk_src = {
 		.parent_data = gcc_parents_6,
 		.num_parents = ARRAY_SIZE(gcc_parents_6),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -956,7 +956,7 @@ static struct clk_rcg2 gcc_camss_tfe_1_clk_src = {
 		.parent_data = gcc_parents_5,
 		.num_parents = ARRAY_SIZE(gcc_parents_5),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -971,7 +971,7 @@ static struct clk_rcg2 gcc_camss_tfe_1_csid_clk_src = {
 		.parent_data = gcc_parents_6,
 		.num_parents = ARRAY_SIZE(gcc_parents_6),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -986,7 +986,7 @@ static struct clk_rcg2 gcc_camss_tfe_2_clk_src = {
 		.parent_data = gcc_parents_5,
 		.num_parents = ARRAY_SIZE(gcc_parents_5),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1001,7 +1001,7 @@ static struct clk_rcg2 gcc_camss_tfe_2_csid_clk_src = {
 		.parent_data = gcc_parents_6,
 		.num_parents = ARRAY_SIZE(gcc_parents_6),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1024,7 +1024,7 @@ static struct clk_rcg2 gcc_camss_tfe_cphy_rx_clk_src = {
 		.parent_data = gcc_parents_10,
 		.num_parents = ARRAY_SIZE(gcc_parents_10),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1046,7 +1046,7 @@ static struct clk_rcg2 gcc_camss_top_ahb_clk_src = {
 		.parent_data = gcc_parents_7,
 		.num_parents = ARRAY_SIZE(gcc_parents_7),
 		.flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1116,7 +1116,7 @@ static struct clk_rcg2 gcc_pdm2_clk_src = {
 		.name = "gcc_pdm2_clk_src",
 		.parent_data = gcc_parents_0,
 		.num_parents = ARRAY_SIZE(gcc_parents_0),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1329,7 +1329,7 @@ static struct clk_rcg2 gcc_ufs_phy_axi_clk_src = {
 		.name = "gcc_ufs_phy_axi_clk_src",
 		.parent_data = gcc_parents_0,
 		.num_parents = ARRAY_SIZE(gcc_parents_0),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1351,7 +1351,7 @@ static struct clk_rcg2 gcc_ufs_phy_ice_core_clk_src = {
 		.name = "gcc_ufs_phy_ice_core_clk_src",
 		.parent_data = gcc_parents_0,
 		.num_parents = ARRAY_SIZE(gcc_parents_0),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1392,7 +1392,7 @@ static struct clk_rcg2 gcc_ufs_phy_unipro_core_clk_src = {
 		.name = "gcc_ufs_phy_unipro_core_clk_src",
 		.parent_data = gcc_parents_0,
 		.num_parents = ARRAY_SIZE(gcc_parents_0),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1414,7 +1414,7 @@ static struct clk_rcg2 gcc_usb30_prim_master_clk_src = {
 		.name = "gcc_usb30_prim_master_clk_src",
 		.parent_data = gcc_parents_0,
 		.num_parents = ARRAY_SIZE(gcc_parents_0),
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
@@ -1483,7 +1483,7 @@ static struct clk_rcg2 gcc_video_venus_clk_src = {
 		.parent_data = gcc_parents_13,
 		.num_parents = ARRAY_SIZE(gcc_parents_13),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
Signature · 1 line
2.39.2
author maintainer
#604 lore raw

PATCH 602/694 power: supply: rk817: Fix low SOC bugs

In reply to Greg Kroah-Hartman

From: Chris Morgan <[email protected]>

[ Upstream commit baba1315a74d12772d4940a05d58dc03e6ec0635 ]

When the SOC approaches zero, an integer overflows in the columb counter causing the driver to react poorly. This makes the driver think it's at (above) the fully charged capacity when in fact it's zero. It would then write this full capacity to NVRAM which would be used on boot if the device remained off for less than 5 hours and not plugged in.

This can be fixed and guarded against by doing the following:
- Changing the type of tmp in rk817_read_or_set_full_charge_on_boot() to be an int instead of a u32. That way we can account for negative numbers.
- Guard against negative values for the full charge on boot by setting the charge to 0 if the system charge reports less than 0.
- Catch scenarios where the battery voltage is below the design minimum voltage and set the system SOC to 0 at that time and update the columb counter with a charge level of 0.
- Change the off time value from 5 hours to 30 minutes before we recalculate the current capacity based on the OCV tables.

These changes allow the driver to operate better at low voltage/low capacity conditions.

Fixes 3268a4d9b0b8 ("power: supply: rk817: Fix unsigned comparison with less than zero")
Fixes 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
---
 drivers/power/supply/rk817_charger.c | 33 ++++++++++++++++++++++------
 1 file changed, 26 insertions(+), 7 deletions(-)
drivers/power/supply/rk817_charger.c +26 -7
index 36f807b5ec442..f1b431aa0e4f2 100644
@@ -335,6 +335,20 @@ static int rk817_bat_calib_cap(struct rk817_charger *charger)
 			charger->fcc_mah * 1000);
 	}
 
+	/*
+	 * Set the SOC to 0 if we are below the minimum system voltage.
+	 */
+	if (volt_avg <= charger->bat_voltage_min_design_uv) {
+		charger->soc = 0;
+		charge_now_adc = CHARGE_TO_ADC(0, charger->res_div);
+		put_unaligned_be32(charge_now_adc, bulk_reg);
+		regmap_bulk_write(rk808->regmap,
+				  RK817_GAS_GAUGE_Q_INIT_H3, bulk_reg, 4);
+		dev_warn(charger->dev,
+			 "Battery voltage %d below minimum voltage %d\n",
+			 volt_avg, charger->bat_voltage_min_design_uv);
+		}
+
 	rk817_record_battery_nvram_values(charger);
 
 	return 0;
@@ -710,9 +724,10 @@ static int rk817_read_battery_nvram_values(struct rk817_charger *charger)
 
 	/*
 	 * Read the nvram for state of charge. Sanity check for values greater
-	 * than 100 (10000). If the value is off it should get corrected
-	 * automatically when the voltage drops to the min (soc is 0) or when
-	 * the battery is full (soc is 100).
+	 * than 100 (10000) or less than 0, because other things (BSP kernels,
+	 * U-Boot, or even i2cset) can write to this register. If the value is
+	 * off it should get corrected automatically when the voltage drops to
+	 * the min (soc is 0) or when the battery is full (soc is 100).
 	 */
 	ret = regmap_bulk_read(charger->rk808->regmap,
 			       RK817_GAS_GAUGE_BAT_R1, bulk_reg, 3);
@@ -721,6 +736,8 @@ static int rk817_read_battery_nvram_values(struct rk817_charger *charger)
 	charger->soc = get_unaligned_le24(bulk_reg);
 	if (charger->soc > 10000)
 		charger->soc = 10000;
+	if (charger->soc < 0)
+		charger->soc = 0;
 
 	return 0;
 }
@@ -731,8 +748,8 @@ rk817_read_or_set_full_charge_on_boot(struct rk817_charger *charger,
 {
 	struct rk808 *rk808 = charger->rk808;
 	u8 bulk_reg[4];
-	u32 boot_voltage, boot_charge_mah, tmp;
-	int ret, reg, off_time;
+	u32 boot_voltage, boot_charge_mah;
+	int ret, reg, off_time, tmp;
 	bool first_boot;
 
 	/*
@@ -785,10 +802,12 @@ rk817_read_or_set_full_charge_on_boot(struct rk817_charger *charger,
 		regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
 				 bulk_reg, 4);
 		tmp = get_unaligned_be32(bulk_reg);
+		if (tmp < 0)
+			tmp = 0;
 		boot_charge_mah = ADC_TO_CHARGE_UAH(tmp,
 						    charger->res_div) / 1000;
 		/*
-		 * Check if the columb counter has been off for more than 300
+		 * Check if the columb counter has been off for more than 30
 		 * minutes as it tends to drift downward. If so, re-init soc
 		 * with the boot voltage instead. Note the unit values for the
 		 * OFF_CNT register appear to be in decaminutes and stops
@@ -799,7 +818,7 @@ rk817_read_or_set_full_charge_on_boot(struct rk817_charger *charger,
 		 * than 0 on a reboot anyway.
 		 */
 		regmap_read(rk808->regmap, RK817_GAS_GAUGE_OFF_CNT, &off_time);
-		if (off_time >= 30) {
+		if (off_time >= 3) {
 			regmap_bulk_read(rk808->regmap,
 					 RK817_GAS_GAUGE_PWRON_VOL_H,
 					 bulk_reg, 2);
Signature · 1 line
2.39.2
author maintainer
#605 lore raw

PATCH 603/694 RDMA/cm: Trace icm_send_rej event before the cm state is reset

In reply to Greg Kroah-Hartman

From: Mark Zhang <[email protected]>

[ Upstream commit bd9de1badac7e4ff6780365d4aa38983f5e2a436 ]

Trace icm_send_rej event before the cm state is reset to idle, so that correct cm state will be logged. For example when an incoming request is rejected, the old trace log was:

    icm_send_rej: local_id=961102742 remote_id=3829151631 state=IDLE reason=REJ_CONSUMER_DEFINED
With this patch:
    icm_send_rej: local_id=312971016 remote_id=3778819983 state=MRA_REQ_SENT reason=REJ_CONSUMER_DEFINED
Fixes 8dc105befe16 ("RDMA/cm: Add tracepoints to track MAD send operations")
---
 drivers/infiniband/core/cm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/core/cm.c +2 -1
index 603c0aecc3614..ff58058aeadca 100644
@@ -2912,6 +2912,8 @@ static int cm_send_rej_locked(struct cm_id_private *cm_id_priv,
 	    (ari && ari_length > IB_CM_REJ_ARI_LENGTH))
 		return -EINVAL;
 
+	trace_icm_send_rej(&cm_id_priv->id, reason);
+
 	switch (state) {
 	case IB_CM_REQ_SENT:
 	case IB_CM_MRA_REQ_RCVD:
@@ -2942,7 +2944,6 @@ static int cm_send_rej_locked(struct cm_id_private *cm_id_priv,
 		return -EINVAL;
 	}
 
-	trace_icm_send_rej(&cm_id_priv->id, reason);
 	ret = ib_post_send_mad(msg, NULL);
 	if (ret) {
 		cm_free_msg(msg);
Signature · 1 line
2.39.2
author maintainer
#606 lore raw

PATCH 604/694 RDMA/srpt: Add a check for valid mad_agent pointer

In reply to Greg Kroah-Hartman

From: Saravanan Vajravel <[email protected]>

[ Upstream commit eca5cd9474cd26d62f9756f536e2e656d3f62f3a ]

When unregistering MAD agent, srpt module has a non-null check for 'mad_agent' pointer before invoking ib_unregister_mad_agent(). This check can pass if 'mad_agent' variable holds an error value. The 'mad_agent' can have an error value for a short window when srpt_add_one() and srpt_remove_one() is executed simultaneously.

In srpt module, added a valid pointer check for 'sport->mad_agent' before unregistering MAD agent.

This issue can hit when RoCE driver unregisters ib_device

Stack Trace:
------------

BUG: kernel NULL pointer dereference, address: 000000000000004d
PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020
Workqueue: bnxt_re bnxt_re_task [bnxt_re]
RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40
Call Trace:
  ib_unregister_mad_agent+0x46/0x2f0 [ib_core]
  IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
  ? __schedule+0x20b/0x560
  srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt]
  srpt_remove_one+0x20/0x150 [ib_srpt]
  remove_client_context+0x88/0xd0 [ib_core]
  bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex
  disable_device+0x8a/0x160 [ib_core]
  bond0: active interface up!
  ? kernfs_name_hash+0x12/0x80
 (NULL device *): Bonding Info Received: rdev: 000000006c0b8247
  __ib_unregister_device+0x42/0xb0 [ib_core]
 (NULL device *):         Master: mode: 4 num_slaves:2
  ib_unregister_device+0x22/0x30 [ib_core]
 (NULL device *):         Slave: id: 105069936 name:p2p1 link:0 state:0
  bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re]
  bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re]
---
 drivers/infiniband/ulp/srpt/ib_srpt.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)
drivers/infiniband/ulp/srpt/ib_srpt.c +13 -10
index 3c3fae738c3ed..25e799dba999e 100644
@@ -549,6 +549,7 @@ static int srpt_format_guid(char *buf, unsigned int size, const __be64 *guid)
  */
 static int srpt_refresh_port(struct srpt_port *sport)
 {
+	struct ib_mad_agent *mad_agent;
 	struct ib_mad_reg_req reg_req;
 	struct ib_port_modify port_modify;
 	struct ib_port_attr port_attr;
@@ -593,24 +594,26 @@ static int srpt_refresh_port(struct srpt_port *sport)
 		set_bit(IB_MGMT_METHOD_GET, reg_req.method_mask);
 		set_bit(IB_MGMT_METHOD_SET, reg_req.method_mask);
 
-		sport->mad_agent = ib_register_mad_agent(sport->sdev->device,
-							 sport->port,
-							 IB_QPT_GSI,
-							 &reg_req, 0,
-							 srpt_mad_send_handler,
-							 srpt_mad_recv_handler,
-							 sport, 0);
-		if (IS_ERR(sport->mad_agent)) {
+		mad_agent = ib_register_mad_agent(sport->sdev->device,
+						  sport->port,
+						  IB_QPT_GSI,
+						  &reg_req, 0,
+						  srpt_mad_send_handler,
+						  srpt_mad_recv_handler,
+						  sport, 0);
+		if (IS_ERR(mad_agent)) {
 			pr_err("%s-%d: MAD agent registration failed (%ld). Note: this is expected if SR-IOV is enabled.\n",
 			       dev_name(&sport->sdev->device->dev), sport->port,
-			       PTR_ERR(sport->mad_agent));
+			       PTR_ERR(mad_agent));
 			sport->mad_agent = NULL;
 			memset(&port_modify, 0, sizeof(port_modify));
 			port_modify.clr_port_cap_mask = IB_PORT_DEVICE_MGMT_SUP;
 			ib_modify_port(sport->sdev->device, sport->port, 0,
 				       &port_modify);
-
+			return 0;
 		}
+
+		sport->mad_agent = mad_agent;
 	}
 
 	return 0;
Signature · 1 line
2.39.2
author maintainer
#607 lore raw

PATCH 605/694 IB/hfi1: Fix SDMA mmu_rb_node not being evicted in LRU order

In reply to Greg Kroah-Hartman

From: Patrick Kelsey <[email protected]>

[ Upstream commit 9fe8fec5e43d5a80f43cbf61aaada1b047a1eb61 ]

hfi1_mmu_rb_remove_unless_exact() did not move mmu_rb_node objects in mmu_rb_handler->lru_list after getting a cache hit on an mmu_rb_node.

As a result, hfi1_mmu_rb_evict() was not guaranteed to evict truly least-recently used nodes.

This could be a performance issue for an application when that application:
- Uses some long-lived buffers frequently.
- Uses a large number of buffers once.
- Hits the mmu_rb_handler cache size or pinned-page limits, forcing mmu_rb_handler cache entries to be evicted.

In this case, the one-time use buffers cause the long-lived buffer entries to eventually filter to the end of the LRU list where hfi1_mmu_rb_evict() will consider evicting a frequently-used long-lived entry instead of evicting one of the one-time use entries.

Fix this by inserting new mmu_rb_node at the tail of mmu_rb_handler->lru_list and move mmu_rb_ndoe to the tail of mmu_rb_handler->lru_list when the mmu_rb_node is a hit in hfi1_mmu_rb_remove_unless_exact(). Change hfi1_mmu_rb_evict() to evict from the head of mmu_rb_handler->lru_list instead of the tail.

---
 drivers/infiniband/hw/hfi1/mmu_rb.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
drivers/infiniband/hw/hfi1/mmu_rb.c +6 -7
index 7333646021bb8..af46ff2033426 100644
@@ -130,7 +130,7 @@ int hfi1_mmu_rb_insert(struct mmu_rb_handler *handler,
 		goto unlock;
 	}
 	__mmu_int_rb_insert(mnode, &handler->root);
-	list_add(&mnode->list, &handler->lru_list);
+	list_add_tail(&mnode->list, &handler->lru_list);
 
 	ret = handler->ops->insert(handler->ops_arg, mnode);
 	if (ret) {
@@ -181,8 +181,10 @@ bool hfi1_mmu_rb_remove_unless_exact(struct mmu_rb_handler *handler,
 	spin_lock_irqsave(&handler->lock, flags);
 	node = __mmu_rb_search(handler, addr, len);
 	if (node) {
-		if (node->addr == addr && node->len == len)
+		if (node->addr == addr && node->len == len) {
+			list_move_tail(&node->list, &handler->lru_list);
 			goto unlock;
+		}
 		__mmu_int_rb_remove(node, &handler->root);
 		list_del(&node->list); /* remove from LRU list */
 		ret = true;
@@ -206,8 +208,7 @@ void hfi1_mmu_rb_evict(struct mmu_rb_handler *handler, void *evict_arg)
 	INIT_LIST_HEAD(&del_list);
 
 	spin_lock_irqsave(&handler->lock, flags);
-	list_for_each_entry_safe_reverse(rbnode, ptr, &handler->lru_list,
-					 list) {
+	list_for_each_entry_safe(rbnode, ptr, &handler->lru_list, list) {
 		if (handler->ops->evict(handler->ops_arg, rbnode, evict_arg,
 					&stop)) {
 			__mmu_int_rb_remove(rbnode, &handler->root);
@@ -219,9 +220,7 @@ void hfi1_mmu_rb_evict(struct mmu_rb_handler *handler, void *evict_arg)
 	}
 	spin_unlock_irqrestore(&handler->lock, flags);
 
-	while (!list_empty(&del_list)) {
-		rbnode = list_first_entry(&del_list, struct mmu_rb_node, list);
-		list_del(&rbnode->list);
+	list_for_each_entry_safe(rbnode, ptr, &del_list, list) {
 		handler->ops->remove(handler->ops_arg, rbnode);
 	}
 }
Signature · 1 line
2.39.2
author maintainer
#608 lore raw

PATCH 606/694 IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests

In reply to Greg Kroah-Hartman

From: Patrick Kelsey <[email protected]>

[ Upstream commit 00cbce5cbf88459cd1aa1d60d0f1df15477df127 ]

hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a

Here are the specific bugs:
1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec->iov.iov_len and are thus not intended to be in the packet.
2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request->iovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages.

This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request.

Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well.

Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit:
1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings.
2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node.

If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail.

The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between
(2) and (3).
3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler->lock and checks mmu_rb_node->refcount before mmu_rb_node->refcount is incremented.
4. Related to #2 above, SDMA request submission failure path does not check mmu_rb_node->refcount before freeing mmu_rb_node object.

If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete.

---
 drivers/infiniband/hw/hfi1/ipoib_tx.c   |   1 +
 drivers/infiniband/hw/hfi1/mmu_rb.c     |  66 +--
 drivers/infiniband/hw/hfi1/mmu_rb.h     |   8 +-
 drivers/infiniband/hw/hfi1/sdma.c       |  21 +-
 drivers/infiniband/hw/hfi1/sdma.h       |  16 +-
 drivers/infiniband/hw/hfi1/sdma_txreq.h |   1 +
 drivers/infiniband/hw/hfi1/trace_mmu.h  |   4 -
 drivers/infiniband/hw/hfi1/user_sdma.c  | 600 +++++++++++++++---------
 drivers/infiniband/hw/hfi1/user_sdma.h  |   5 -
 drivers/infiniband/hw/hfi1/verbs.c      |   4 +-
 drivers/infiniband/hw/hfi1/vnic_sdma.c  |   1 +
 11 files changed, 423 insertions(+), 304 deletions(-)
drivers/infiniband/hw/hfi1/ipoib_tx.c +1 -0
index 349eb41391368..8973a081d641e 100644
@@ -215,6 +215,7 @@ static int hfi1_ipoib_build_ulp_payload(struct ipoib_txreq *tx,
 		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 		ret = sdma_txadd_page(dd,
+				      NULL,
 				      txreq,
 				      skb_frag_page(frag),
 				      frag->bv_offset,
drivers/infiniband/hw/hfi1/mmu_rb.c +14 -52

90 lines not on this page · raw message

drivers/infiniband/hw/hfi1/mmu_rb.h +3 -5
index 7417be2b9dc8a..ed75acdb7b839 100644
@@ -52,10 +52,8 @@ void hfi1_mmu_rb_unregister(struct mmu_rb_handler *handler);
 int hfi1_mmu_rb_insert(struct mmu_rb_handler *handler,
 		       struct mmu_rb_node *mnode);
 void hfi1_mmu_rb_evict(struct mmu_rb_handler *handler, void *evict_arg);
-void hfi1_mmu_rb_remove(struct mmu_rb_handler *handler,
-			struct mmu_rb_node *mnode);
-bool hfi1_mmu_rb_remove_unless_exact(struct mmu_rb_handler *handler,
-				     unsigned long addr, unsigned long len,
-				     struct mmu_rb_node **rb_node);
+struct mmu_rb_node *hfi1_mmu_rb_get_first(struct mmu_rb_handler *handler,
+					  unsigned long addr,
+					  unsigned long len);
 
 #endif /* _HFI1_MMU_RB_H */
drivers/infiniband/hw/hfi1/sdma.c +4 -17
index 8ed20392e9f0d..bb2552dd29c1e 100644
@@ -1593,22 +1593,7 @@ static inline void sdma_unmap_desc(
 	struct hfi1_devdata *dd,
 	struct sdma_desc *descp)
 {
-	switch (sdma_mapping_type(descp)) {
-	case SDMA_MAP_SINGLE:
-		dma_unmap_single(
-			&dd->pcidev->dev,
-			sdma_mapping_addr(descp),
-			sdma_mapping_len(descp),
-			DMA_TO_DEVICE);
-		break;
-	case SDMA_MAP_PAGE:
-		dma_unmap_page(
-			&dd->pcidev->dev,
-			sdma_mapping_addr(descp),
-			sdma_mapping_len(descp),
-			DMA_TO_DEVICE);
-		break;
-	}
+	system_descriptor_complete(dd, descp);
 }
 
 /*
@@ -3128,7 +3113,7 @@ int ext_coal_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx,
 
 		/* Add descriptor for coalesce buffer */
 		tx->desc_limit = MAX_DESC;
-		return _sdma_txadd_daddr(dd, SDMA_MAP_SINGLE, tx,
+		return _sdma_txadd_daddr(dd, SDMA_MAP_SINGLE, NULL, tx,
 					 addr, tx->tlen);
 	}
 
@@ -3167,10 +3152,12 @@ int _pad_sdma_tx_descs(struct hfi1_devdata *dd, struct sdma_txreq *tx)
 			return rval;
 		}
 	}
+
 	/* finish the one just added */
 	make_tx_sdma_desc(
 		tx,
 		SDMA_MAP_NONE,
+		NULL,
 		dd->sdma_pad_phys,
 		sizeof(u32) - (tx->packet_len & (sizeof(u32) - 1)));
 	tx->num_desc++;
drivers/infiniband/hw/hfi1/sdma.h +11 -5
index b023fc461bd51..95aaec14c6c28 100644
@@ -594,6 +594,7 @@ static inline dma_addr_t sdma_mapping_addr(struct sdma_desc *d)
 static inline void make_tx_sdma_desc(
 	struct sdma_txreq *tx,
 	int type,
+	void *pinning_ctx,
 	dma_addr_t addr,
 	size_t len)
 {
@@ -612,6 +613,7 @@ static inline void make_tx_sdma_desc(
 				<< SDMA_DESC0_PHY_ADDR_SHIFT) |
 			(((u64)len & SDMA_DESC0_BYTE_COUNT_MASK)
 				<< SDMA_DESC0_BYTE_COUNT_SHIFT);
+	desc->pinning_ctx = pinning_ctx;
 }
 
 /* helper to extend txreq */
@@ -643,6 +645,7 @@ static inline void _sdma_close_tx(struct hfi1_devdata *dd,
 static inline int _sdma_txadd_daddr(
 	struct hfi1_devdata *dd,
 	int type,
+	void *pinning_ctx,
 	struct sdma_txreq *tx,
 	dma_addr_t addr,
 	u16 len)
@@ -652,6 +655,7 @@ static inline int _sdma_txadd_daddr(
 	make_tx_sdma_desc(
 		tx,
 		type,
+		pinning_ctx,
 		addr, len);
 	WARN_ON(len > tx->tlen);
 	tx->num_desc++;
@@ -672,6 +676,7 @@ static inline int _sdma_txadd_daddr(
 /**
  * sdma_txadd_page() - add a page to the sdma_txreq
  * @dd: the device to use for mapping
+ * @pinning_ctx: context to be released at descriptor retirement
  * @tx: tx request to which the page is added
  * @page: page to map
  * @offset: offset within the page
@@ -687,6 +692,7 @@ static inline int _sdma_txadd_daddr(
  */
 static inline int sdma_txadd_page(
 	struct hfi1_devdata *dd,
+	void *pinning_ctx,
 	struct sdma_txreq *tx,
 	struct page *page,
 	unsigned long offset,
@@ -714,8 +720,7 @@ static inline int sdma_txadd_page(
 		return -ENOSPC;
 	}
 
-	return _sdma_txadd_daddr(
-			dd, SDMA_MAP_PAGE, tx, addr, len);
+	return _sdma_txadd_daddr(dd, SDMA_MAP_PAGE, pinning_ctx, tx, addr, len);
 }
 
 /**
@@ -749,7 +754,8 @@ static inline int sdma_txadd_daddr(
 			return rval;
 	}
 
-	return _sdma_txadd_daddr(dd, SDMA_MAP_NONE, tx, addr, len);
+	return _sdma_txadd_daddr(dd, SDMA_MAP_NONE, NULL, tx,
+				 addr, len);
 }
 
 /**
@@ -795,8 +801,7 @@ static inline int sdma_txadd_kvaddr(
 		return -ENOSPC;
 	}
 
-	return _sdma_txadd_daddr(
-			dd, SDMA_MAP_SINGLE, tx, addr, len);
+	return _sdma_txadd_daddr(dd, SDMA_MAP_SINGLE, NULL, tx, addr, len);
 }
 
 struct iowait_work;
@@ -1030,4 +1035,5 @@ extern uint mod_num_sdma;
 
 void sdma_update_lmc(struct hfi1_devdata *dd, u64 mask, u32 lid);
 
+void system_descriptor_complete(struct hfi1_devdata *dd, struct sdma_desc *descp);
 #endif
drivers/infiniband/hw/hfi1/sdma_txreq.h +1 -0
index e262fb5c5ec61..fad946cb5e0d8 100644
@@ -19,6 +19,7 @@
 struct sdma_desc {
 	/* private:  don't use directly */
 	u64 qw[2];
+	void *pinning_ctx;
 };
 
 /**
drivers/infiniband/hw/hfi1/trace_mmu.h +0 -4
index 187e9244fe5ed..57900ebb7702e 100644
@@ -37,10 +37,6 @@ DEFINE_EVENT(hfi1_mmu_rb_template, hfi1_mmu_rb_search,
 	     TP_PROTO(unsigned long addr, unsigned long len),
 	     TP_ARGS(addr, len));
 
-DEFINE_EVENT(hfi1_mmu_rb_template, hfi1_mmu_rb_remove,
-	     TP_PROTO(unsigned long addr, unsigned long len),
-	     TP_ARGS(addr, len));
-
 DEFINE_EVENT(hfi1_mmu_rb_template, hfi1_mmu_mem_invalidate,
 	     TP_PROTO(unsigned long addr, unsigned long len),
 	     TP_ARGS(addr, len));
drivers/infiniband/hw/hfi1/user_sdma.c +386 -214

700 lines not on this page · raw message

drivers/infiniband/hw/hfi1/user_sdma.h +0 -5
index ea56eb57e6568..a241836371dc1 100644
@@ -112,16 +112,11 @@ struct sdma_mmu_node {
 struct user_sdma_iovec {
 	struct list_head list;
 	struct iovec iov;
-	/* number of pages in this vector */
-	unsigned int npages;
-	/* array of pinned pages for this vector */
-	struct page **pages;
 	/*
 	 * offset into the virtual address space of the vector at
 	 * which we last left off.
 	 */
 	u64 offset;
-	struct sdma_mmu_node *node;
 };
 
 /* evict operation argument */
drivers/infiniband/hw/hfi1/verbs.c +2 -2
index 7f6d7fc7951df..fbdcfecb1768c 100644
@@ -778,8 +778,8 @@ static int build_verbs_tx_desc(
 
 	/* add icrc, lt byte, and padding to flit */
 	if (extra_bytes)
-		ret = sdma_txadd_daddr(sde->dd, &tx->txreq,
-				       sde->dd->sdma_pad_phys, extra_bytes);
+		ret = sdma_txadd_daddr(sde->dd, &tx->txreq, sde->dd->sdma_pad_phys,
+				       extra_bytes);
 
 bail_txadd:
 	return ret;
drivers/infiniband/hw/hfi1/vnic_sdma.c +1 -0
index c3f0f8d877c37..727eedfba332a 100644
@@ -64,6 +64,7 @@ static noinline int build_vnic_ulp_payload(struct sdma_engine *sde,
 
 		/* combine physically continuous fragments later? */
 		ret = sdma_txadd_page(sde->dd,
+				      NULL,
 				      &tx->txreq,
 				      skb_frag_page(frag),
 				      skb_frag_off(frag),
Signature · 1 line
2.39.2
author maintainer
#609 lore raw

PATCH 607/694 clk: imx: fracn-gppll: fix the rate table

In reply to Greg Kroah-Hartman

From: Peng Fan <[email protected]>

[ Upstream commit cf8dccfedce848f67eaa42e8839305d028319161 ]

The Fvco should be range 2.4GHz to 5GHz, the original table voilate the spec, so update the table to fix it.

Fixes c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
Fixes 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
Fixes 1b26cb8a77a4 ("clk: imx: support fracn gppll")
---
 drivers/clk/imx/clk-fracn-gppll.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/clk/imx/clk-fracn-gppll.c +9 -7
index a2aaa14fc1aef..ec50c41e2a4c9 100644
@@ -60,18 +60,20 @@ struct clk_fracn_gppll {
 };
 
 /*
- * Fvco = Fref * (MFI + MFN / MFD)
- * Fout = Fvco / (rdiv * odiv)
+ * Fvco = (Fref / rdiv) * (MFI + MFN / MFD)
+ * Fout = Fvco / odiv
+ * The (Fref / rdiv) should be in range 20MHz to 40MHz
+ * The Fvco should be in range 2.5Ghz to 5Ghz
  */
 static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
-	PLL_FRACN_GP(650000000U, 81, 0, 1, 0, 3),
+	PLL_FRACN_GP(650000000U, 162, 50, 100, 0, 6),
 	PLL_FRACN_GP(594000000U, 198, 0, 1, 0, 8),
-	PLL_FRACN_GP(560000000U, 70, 0, 1, 0, 3),
-	PLL_FRACN_GP(498000000U, 83, 0, 1, 0, 4),
+	PLL_FRACN_GP(560000000U, 140, 0, 1, 0, 6),
+	PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8),
 	PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
 	PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
-	PLL_FRACN_GP(400000000U, 50, 0, 1, 0, 3),
-	PLL_FRACN_GP(393216000U, 81, 92, 100, 0, 5)
+	PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
+	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
 };
 
 struct imx_fracn_gppll_clk imx_fracn_gppll = {
Signature · 1 line
2.39.2
author maintainer
#610 lore raw

PATCH 608/694 clk: imx: fracn-gppll: disable hardware select control

In reply to Greg Kroah-Hartman

From: Peng Fan <[email protected]>

[ Upstream commit 4435467b15b069e5a6f50ca9a9260e86b74dbc13 ]

When programming PLL, should disable Hardware control select to make PLL controlled by register, not hardware inputs through OSCPLL.

---
 drivers/clk/imx/clk-fracn-gppll.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/clk/imx/clk-fracn-gppll.c +6 -0
index ec50c41e2a4c9..f6674110a88e0 100644
@@ -15,6 +15,7 @@
 #include "clk.h"
 
 #define PLL_CTRL		0x0
+#define HW_CTRL_SEL		BIT(16)
 #define CLKMUX_BYPASS		BIT(2)
 #define CLKMUX_EN		BIT(1)
 #define POWERUP_MASK		BIT(0)
@@ -193,6 +194,11 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
 
 	rate = imx_get_pll_settings(pll, drate);
 
+	/* Hardware control select disable. PLL is control by register */
+	tmp = readl_relaxed(pll->base + PLL_CTRL);
+	tmp &= ~HW_CTRL_SEL;
+	writel_relaxed(tmp, pll->base + PLL_CTRL);
+
 	/* Disable output */
 	tmp = readl_relaxed(pll->base + PLL_CTRL);
 	tmp &= ~CLKMUX_EN;
Signature · 1 line
2.39.2
author maintainer
#611 lore raw

PATCH 609/694 clk: imx: imx8ulp: Fix XBAR_DIVBUS and AD_SLOW clock parents

In reply to Greg Kroah-Hartman

From: Peng Fan <[email protected]>

[ Upstream commit d608c18018c897b88d66f1340fe274b7181817fa ]

XBAR_DIVBUS and AD_SLOW should set parent to XBAR_AD_DIVPLAT and XBAR_DIVBUS respectively, not the NIC_AD. otherwise we will get wrong clock rate.

---
 drivers/clk/imx/clk-imx8ulp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/imx/clk-imx8ulp.c +2 -2
index a07df3b44703f..89121037a8f0e 100644
@@ -200,8 +200,8 @@ static int imx8ulp_clk_cgc1_init(struct platform_device *pdev)
 	clks[IMX8ULP_CLK_NIC_AD_DIVPLAT] = imx_clk_hw_divider_flags("nic_ad_divplat", "nic_sel", base + 0x34, 21, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
 	clks[IMX8ULP_CLK_NIC_PER_DIVPLAT] = imx_clk_hw_divider_flags("nic_per_divplat", "nic_ad_divplat", base + 0x34, 14, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
 	clks[IMX8ULP_CLK_XBAR_AD_DIVPLAT] = imx_clk_hw_divider_flags("xbar_ad_divplat", "nic_ad_divplat", base + 0x38, 14, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
-	clks[IMX8ULP_CLK_XBAR_DIVBUS] = imx_clk_hw_divider_flags("xbar_divbus", "nic_ad_divplat", base + 0x38, 7, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
-	clks[IMX8ULP_CLK_XBAR_AD_SLOW] = imx_clk_hw_divider_flags("xbar_ad_slow", "nic_ad_divplat", base + 0x38, 0, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_XBAR_DIVBUS] = imx_clk_hw_divider_flags("xbar_divbus", "xbar_ad_divplat", base + 0x38, 7, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_XBAR_AD_SLOW] = imx_clk_hw_divider_flags("xbar_ad_slow", "xbar_divbus", base + 0x38, 0, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
 
 	clks[IMX8ULP_CLK_SOSC_DIV1_GATE] = imx_clk_hw_gate_dis("sosc_div1_gate", "sosc", base + 0x108, 7);
 	clks[IMX8ULP_CLK_SOSC_DIV2_GATE] = imx_clk_hw_gate_dis("sosc_div2_gate", "sosc", base + 0x108, 15);
Signature · 1 line
2.39.2
author maintainer
#612 lore raw

PATCH 610/694 NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit 40882deb83c29d8df4470d4e5e7f137b6acf7ad1 ]

The spec requires that we always at least send a RECLAIM_COMPLETE when we're done establishing the lease and recovering any state.

Fixes fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality")
---
 fs/nfs/nfs4state.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/nfs/nfs4state.c +4 -0
index 2a0ca5c7f082a..660ccfaf463e4 100644
@@ -67,6 +67,8 @@
 
 #define OPENOWNER_POOL_SIZE	8
 
+static void nfs4_state_start_reclaim_reboot(struct nfs_client *clp);
+
 const nfs4_stateid zero_stateid = {
 	{ .data = { 0 } },
 	.type = NFS4_SPECIAL_STATEID_TYPE,
@@ -330,6 +332,8 @@ int nfs41_init_clientid(struct nfs_client *clp, const struct cred *cred)
 	status = nfs4_proc_create_session(clp, cred);
 	if (status != 0)
 		goto out;
+	if (!(clp->cl_exchange_flags & EXCHGID4_FLAG_CONFIRMED_R))
+		nfs4_state_start_reclaim_reboot(clp);
 	nfs41_finish_session_reset(clp);
 	nfs_mark_client_ready(clp, NFS_CS_READY);
 out:
Signature · 1 line
2.39.2
author maintainer
#613 lore raw

PATCH 611/694 iommu/amd: Set page size bitmap during V2 domain allocation

In reply to Greg Kroah-Hartman

From: Jerry Snitselaar <[email protected]>

[ Upstream commit 8f880d19e6ad645a4b8066d5ff091c980b3231e7 ]

With the addition of the V2 page table support, the domain page size bitmap needs to be set prior to iommu core setting up direct mappings for reserved regions. When reserved regions are mapped, if this is not done, it will be looking at the V1 page size bitmap when determining the page size to use in iommu_pgsize(). When it gets into the actual amd mapping code, a check of see if the page size is supported can fail, because at that point it is checking it against the V2 page size bitmap which only supports 4K, 2M, and 1G.

Add a check to __iommu_domain_alloc() to not override the bitmap if it was already set by the iommu ops domain_alloc() code path.

Cc Vasant Hegde <[email protected]>
Cc Suravee Suthikulpanit <[email protected]>
Cc Robin Murphy <[email protected]>
Cc Will Deacon <[email protected]>
Cc Joerg Roedel <[email protected]>
Fixes 4db6c41f0946 ("iommu/amd: Add support for using AMD IOMMU v2 page table for DMA-API")
---
 drivers/iommu/amd/iommu.c | 6 ++----
 drivers/iommu/iommu.c     | 9 +++++++--
 2 files changed, 9 insertions(+), 6 deletions(-)
drivers/iommu/amd/iommu.c +2 -4
index 5a505ba5467e1..167da5b1a5e31 100644
@@ -1666,10 +1666,6 @@ static void do_attach(struct iommu_dev_data *dev_data,
 	domain->dev_iommu[iommu->index] += 1;
 	domain->dev_cnt                 += 1;
 
-	/* Override supported page sizes */
-	if (domain->flags & PD_GIOV_MASK)
-		domain->domain.pgsize_bitmap = AMD_IOMMU_PGSIZES_V2;
-
 	/* Update device table */
 	set_dte_entry(iommu, dev_data->devid, domain,
 		      ats, dev_data->iommu_v2);
@@ -2048,6 +2044,8 @@ static int protection_domain_init_v2(struct protection_domain *domain)
 
 	domain->flags |= PD_GIOV_MASK;
 
+	domain->domain.pgsize_bitmap = AMD_IOMMU_PGSIZES_V2;
+
 	if (domain_enable_v2(domain, 1)) {
 		domain_id_free(domain->id);
 		return -ENOMEM;
drivers/iommu/iommu.c +7 -2
index 10db680acaed5..256a38371120e 100644
@@ -1964,8 +1964,13 @@ static struct iommu_domain *__iommu_domain_alloc(struct bus_type *bus,
 		return NULL;
 
 	domain->type = type;
-	/* Assume all sizes by default; the driver may override this later */
-	domain->pgsize_bitmap = bus->iommu_ops->pgsize_bitmap;
+	/*
+	 * If not already set, assume all sizes by default; the driver
+	 * may override this later
+	 */
+	if (!domain->pgsize_bitmap)
+		domain->pgsize_bitmap = bus->iommu_ops->pgsize_bitmap;
+
 	if (!domain->ops)
 		domain->ops = bus->iommu_ops->default_domain_ops;
 
Signature · 1 line
2.39.2
author maintainer
#614 lore raw

PATCH 612/694 s390/checksum: always use cksm instruction

In reply to Greg Kroah-Hartman

From: Heiko Carstens <[email protected]>

[ Upstream commit e42ac7789df64120d7d3d57433dfc9f37ec0cb99 ]

Commit dfe843dce775 ("s390/checksum: support GENERIC_CSUM, enable it for KASAN") switched s390 to use the generic checksum functions, so that KASAN instrumentation also works checksum functions by avoiding architecture specific inline assemblies.

There is however the problem that the generic csum_partial() function returns a 32 bit value with a 16 bit folded checksum, while the original s390 variant does not fold to 16 bit. This in turn causes that the ipib_checksum in lowcore contains different values depending on kernel config options.

The ipib_checksum is used by system dumpers to verify if pointers in lowcore point to valid data. Verification is done by comparing checksum values. The system dumpers still use 32 bit checksum values which are not folded, and therefore the checksum verification fails (incorrectly).

Symptom is that reboot after dump does not work anymore when a KASAN instrumented kernel is dumped.

Fix this by not using the generic checksum implementation. Instead add an explicit kasan_check_read() so that KASAN knows about the read access from within the inline assembly.

Fixes dfe843dce775 ("s390/checksum: support GENERIC_CSUM, enable it for KASAN")
---
 arch/s390/Kconfig                | 4 ----
 arch/s390/include/asm/checksum.h | 9 ++-------
 2 files changed, 2 insertions(+), 11 deletions(-)
arch/s390/Kconfig +0 -4
index 9809c74e12406..35f15c23c4913 100644
@@ -26,10 +26,6 @@ config GENERIC_BUG
 config GENERIC_BUG_RELATIVE_POINTERS
 	def_bool y
 
-config GENERIC_CSUM
-	bool
-	default y if KASAN
-
 config GENERIC_LOCKBREAK
 	def_bool y if PREEMPTION
 
arch/s390/include/asm/checksum.h +2 -7
index d977a3a2f6190..1b6b992cf18ed 100644
@@ -12,12 +12,7 @@
 #ifndef _S390_CHECKSUM_H
 #define _S390_CHECKSUM_H
 
-#ifdef CONFIG_GENERIC_CSUM
-
-#include <asm-generic/checksum.h>
-
-#else /* CONFIG_GENERIC_CSUM */
-
+#include <linux/kasan-checks.h>
 #include <linux/uaccess.h>
 #include <linux/in6.h>
 
@@ -40,6 +35,7 @@ static inline __wsum csum_partial(const void *buff, int len, __wsum sum)
 		.odd = (unsigned long) len,
 	};
 
+	kasan_check_read(buff, len);
 	asm volatile(
 		"0:	cksm	%[sum],%[rp]\n"
 		"	jo	0b\n"
@@ -135,5 +131,4 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	return csum_fold((__force __wsum)(sum >> 32));
 }
 
-#endif /* CONFIG_GENERIC_CSUM */
 #endif /* _S390_CHECKSUM_H */
Signature · 1 line
2.39.2
author maintainer
#615 lore raw

PATCH 613/694 clk: qcom: lpasscc-sc7280: Skip qdsp6ss clock registration

In reply to Greg Kroah-Hartman

From: Srinivasa Rao Mandadapu <[email protected]>

[ Upstream commit 4fc1c2d9a2b7a394f3b873aae5e03bffd8b5cd31 ]

The qdsp6ss memory region is being shared by ADSP remoteproc device and lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver, skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled and also assign max_register value.

---
 drivers/clk/qcom/lpasscc-sc7280.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/clk/qcom/lpasscc-sc7280.c +10 -6
index 48432010ce247..0df2b29e95e31 100644
@@ -121,14 +121,18 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev)
 		goto destroy_pm_clk;
 	}
 
-	lpass_regmap_config.name = "qdsp6ss";
-	desc = &lpass_qdsp6ss_sc7280_desc;
-
-	ret = qcom_cc_probe_by_index(pdev, 0, desc);
-	if (ret)
-		goto destroy_pm_clk;
+	if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) {
+		lpass_regmap_config.name = "qdsp6ss";
+		lpass_regmap_config.max_register = 0x3f;
+		desc = &lpass_qdsp6ss_sc7280_desc;
+
+		ret = qcom_cc_probe_by_index(pdev, 0, desc);
+		if (ret)
+			goto destroy_pm_clk;
+	}
 
 	lpass_regmap_config.name = "top_cc";
+	lpass_regmap_config.max_register = 0x4;
 	desc = &lpass_cc_top_sc7280_desc;
 
 	ret = qcom_cc_probe_by_index(pdev, 1, desc);
Signature · 1 line
2.39.2
author maintainer
#616 lore raw

PATCH 614/694 clk: qcom: lpassaudiocc-sc7280: Add required gdsc power domain clks in lpass_cc_sc7280_desc

In reply to Greg Kroah-Hartman

From: Mohammad Rafi Shaik <[email protected]>

[ Upstream commit aad09fc7c4a522892eb64a79627b17a3869936cb ]

Add GDSCs in lpass_cc_sc7280_desc struct.
When qcom,adsp-pil-mode is enabled, GDSCs required to solve dependencies in lpass_audiocc probe().

Fixes 0cbcfbe50cbf ("clk: qcom: lpass: Handle the regmap overlap of lpasscc and lpass_aon")
---
 drivers/clk/qcom/lpassaudiocc-sc7280.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/qcom/lpassaudiocc-sc7280.c +2 -0
index 1339f9211a149..134eb1529ede2 100644
@@ -696,6 +696,8 @@ static const struct qcom_cc_desc lpass_cc_sc7280_desc = {
 	.config = &lpass_audio_cc_sc7280_regmap_config,
 	.clks = lpass_cc_sc7280_clocks,
 	.num_clks = ARRAY_SIZE(lpass_cc_sc7280_clocks),
+	.gdscs = lpass_aon_cc_sc7280_gdscs,
+	.num_gdscs = ARRAY_SIZE(lpass_aon_cc_sc7280_gdscs),
 };
 
 static const struct qcom_cc_desc lpass_audio_cc_sc7280_desc = {
Signature · 1 line
2.39.2
author maintainer
#617 lore raw

PATCH 615/694 clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 1a500e0bc97b6cb3c0d9859e81973b8dd07d1b7b ]

On SM8350 platform the PCIe PIPE clocks require additional handling to function correctly. They are to be switched to the tcxo source before turning PCIe GDSCs off and should be switched to PHY PIPE source once they are working. Switch PCIe PHY clocks to use clk_regmap_phy_mux_ops, which provide support for this dance.

Fixes 44c20c9ed37f ("clk: qcom: gcc: Add clock driver for SM8350")
---
 drivers/clk/qcom/gcc-sm8350.c | 47 ++++++++++-------------------------
 1 file changed, 13 insertions(+), 34 deletions(-)
drivers/clk/qcom/gcc-sm8350.c +13 -34
index af4a1ea284215..1385a98eb3bbe 100644
@@ -17,6 +17,7 @@
 #include "clk-regmap.h"
 #include "clk-regmap-divider.h"
 #include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
 #include "gdsc.h"
 #include "reset.h"
 
@@ -158,26 +159,6 @@ static const struct clk_parent_data gcc_parent_data_3[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static const struct parent_map gcc_parent_map_4[] = {
-	{ P_PCIE_0_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_4[] = {
-	{ .fw_name = "pcie_0_pipe_clk", },
-	{ .fw_name = "bi_tcxo" },
-};
-
-static const struct parent_map gcc_parent_map_5[] = {
-	{ P_PCIE_1_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_5[] = {
-	{ .fw_name = "pcie_1_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
 static const struct parent_map gcc_parent_map_6[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GCC_GPLL0_OUT_MAIN, 1 },
@@ -274,32 +255,30 @@ static const struct clk_parent_data gcc_parent_data_14[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x6b054,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_4,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
-			.parent_data = gcc_parent_data_4,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_4),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_0_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
 
-static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x8d054,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_5,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
-			.parent_data = gcc_parent_data_5,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_5),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_1_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
Signature · 1 line
2.39.2
author maintainer
#618 lore raw

PATCH 616/694 clk: qcom: dispcc-qcm2290: Remove inexistent DSI1PHY clk

In reply to Greg Kroah-Hartman

From: Konrad Dybcio <[email protected]>

[ Upstream commit 68d1151f03067533827fc50b770954ef33149533 ]

There's only one DSI PHY on this SoC. Remove the ghost entry for the clock produced by a secondary one.

Fixes cc517ea3333f ("clk: qcom: Add display clock controller driver for QCM2290")
---
 drivers/clk/qcom/dispcc-qcm2290.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/clk/qcom/dispcc-qcm2290.c +0 -3
index 2ebd9a02b8950..24755dc841f9d 100644
@@ -26,7 +26,6 @@ enum {
 	P_DISP_CC_PLL0_OUT_MAIN,
 	P_DSI0_PHY_PLL_OUT_BYTECLK,
 	P_DSI0_PHY_PLL_OUT_DSICLK,
-	P_DSI1_PHY_PLL_OUT_DSICLK,
 	P_GPLL0_OUT_MAIN,
 	P_SLEEP_CLK,
 };
@@ -106,13 +105,11 @@ static const struct clk_parent_data disp_cc_parent_data_3[] = {
 static const struct parent_map disp_cc_parent_map_4[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_DSI0_PHY_PLL_OUT_DSICLK, 1 },
-	{ P_DSI1_PHY_PLL_OUT_DSICLK, 2 },
 };
 
 static const struct clk_parent_data disp_cc_parent_data_4[] = {
 	{ .fw_name = "bi_tcxo" },
 	{ .fw_name = "dsi0_phy_pll_out_dsiclk" },
-	{ .fw_name = "dsi1_phy_pll_out_dsiclk" },
 };
 
 static const struct parent_map disp_cc_parent_map_5[] = {
Signature · 1 line
2.39.2
author maintainer
#619 lore raw

PATCH 617/694 Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe

In reply to Greg Kroah-Hartman

From: Miaoqian Lin <[email protected]>

[ Upstream commit 5bca3688bdbc3b58a2894b8671a8e2378efe28bd ]

rpi_firmware_get() take reference, we need to release it in error paths as well. Use devm_rpi_firmware_get() helper to handling the resources. Also remove the existing rpi_firmware_put().

Fixes 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver")
Fixes 3b8ddff780b7 ("input: raspberrypi-ts: Release firmware handle when not needed")
---
 drivers/input/touchscreen/raspberrypi-ts.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/input/touchscreen/raspberrypi-ts.c +1 -2
index 5000f5fd9ec38..45c575df994e0 100644
@@ -134,7 +134,7 @@ static int rpi_ts_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	fw = rpi_firmware_get(fw_node);
+	fw = devm_rpi_firmware_get(&pdev->dev, fw_node);
 	of_node_put(fw_node);
 	if (!fw)
 		return -EPROBE_DEFER;
@@ -160,7 +160,6 @@ static int rpi_ts_probe(struct platform_device *pdev)
 	touchbuf = (u32)ts->fw_regs_phys;
 	error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF,
 				      &touchbuf, sizeof(touchbuf));
-	rpi_firmware_put(fw);
 	if (error || touchbuf != 0) {
 		dev_warn(dev, "Failed to set touchbuf, %d\n", error);
 		return error;
Signature · 1 line
2.39.2
author maintainer
#620 lore raw

PATCH 618/694 swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup

In reply to Greg Kroah-Hartman

From: Doug Berger <[email protected]>

[ Upstream commit a90922fa25370902322e9de6640e58737d459a50 ]

The reservedmem_of_init_fn's are invoked very early at boot before the memory zones have even been defined. This makes it inappropriate to test whether the page corresponding to a PFN is in ZONE_HIGHMEM from within one.

Removing the check allows an ARM 32-bit kernel with SPARSEMEM enabled to boot properly since otherwise we would be de-referencing an uninitialized sparsemem map to perform pfn_to_page() check.

The arm64 architecture happens to work (and also has no high memory) but other 32-bit architectures could also be having similar issues.

While it would be nice to provide early feedback about a reserved DMA pool residing in highmem, it is not possible to do that until the first time we try to use it, which is where the check is moved to.

Fixes 0b84e4f8b793 ("swiotlb: Add restricted DMA pool initialization")
---
 kernel/dma/swiotlb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
kernel/dma/swiotlb.c +5 -5
index dac42a2ad5883..2bb9e3b023802 100644
@@ -998,6 +998,11 @@ static int rmem_swiotlb_device_init(struct reserved_mem *rmem,
 	/* Set Per-device io tlb area to one */
 	unsigned int nareas = 1;
 
+	if (PageHighMem(pfn_to_page(PHYS_PFN(rmem->base)))) {
+		dev_err(dev, "Restricted DMA pool must be accessible within the linear mapping.");
+		return -EINVAL;
+	}
+
 	/*
 	 * Since multiple devices can share the same pool, the private data,
 	 * io_tlb_mem struct, will be initialized by the first device attached
@@ -1059,11 +1064,6 @@ static int __init rmem_swiotlb_setup(struct reserved_mem *rmem)
 	    of_get_flat_dt_prop(node, "no-map", NULL))
 		return -EINVAL;
 
-	if (PageHighMem(pfn_to_page(PHYS_PFN(rmem->base)))) {
-		pr_err("Restricted DMA pool must be accessible within the linear mapping.");
-		return -EINVAL;
-	}
-
 	rmem->ops = &rmem_swiotlb_ops;
 	pr_info("Reserved memory: created restricted DMA pool at %pa, size %ld MiB\n",
 		&rmem->base, (unsigned long)rmem->size / SZ_1M);
Signature · 1 line
2.39.2
author maintainer
#621 lore raw

PATCH 619/694 swiotlb: fix debugfs reporting of reserved memory pools

In reply to Greg Kroah-Hartman

From: Michael Kelley <[email protected]>

[ Upstream commit 5499d01c029069044a3b3e50501c77b474c96178 ]

For io_tlb_nslabs, the debugfs code reports the correct value for a specific reserved memory pool. But for io_tlb_used, the value reported is always for the default pool, not the specific reserved pool. Fix this.

Fixes 5c850d31880e ("swiotlb: fix passing local variable to debugfs_create_ulong()")
---
 kernel/dma/swiotlb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
kernel/dma/swiotlb.c +4 -2
index 2bb9e3b023802..09d2f4877d0f4 100644
@@ -930,7 +930,9 @@ EXPORT_SYMBOL_GPL(is_swiotlb_active);
 
 static int io_tlb_used_get(void *data, u64 *val)
 {
-	*val = mem_used(&io_tlb_default_mem);
+	struct io_tlb_mem *mem = data;
+
+	*val = mem_used(mem);
 	return 0;
 }
 DEFINE_DEBUGFS_ATTRIBUTE(fops_io_tlb_used, io_tlb_used_get, NULL, "%llu\n");
@@ -943,7 +945,7 @@ static void swiotlb_create_debugfs_files(struct io_tlb_mem *mem,
 		return;
 
 	debugfs_create_ulong("io_tlb_nslabs", 0400, mem->debugfs, &mem->nslabs);
-	debugfs_create_file("io_tlb_used", 0400, mem->debugfs, NULL,
+	debugfs_create_file("io_tlb_used", 0400, mem->debugfs, mem,
 			&fops_io_tlb_used);
 }
 
Signature · 1 line
2.39.2
author maintainer
#622 lore raw

PATCH 620/694 RDMA/rxe: Convert tasklet args to queue pairs

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit 3946fc2a42b18cf0b675121158a2625825ce27b5 ]

Originally is was thought that the tasklet machinery in rxe_task.c would be used in other applications but that has not happened for years. This patch replaces the 'void *arg' by struct 'rxe_qp *qp' in the parameters to the tasklet calls. This change will have no affect on performance but may make the code a little clearer.

Stable-dep-of: b2b1ddc45745 ("RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"")

---
 drivers/infiniband/sw/rxe/rxe_comp.c |    3 +--
 drivers/infiniband/sw/rxe/rxe_loc.h  |    6 +++---
 drivers/infiniband/sw/rxe/rxe_req.c  |    3 +--
 drivers/infiniband/sw/rxe/rxe_resp.c |    3 +--
 drivers/infiniband/sw/rxe/rxe_task.c |   11 ++++++-----
 drivers/infiniband/sw/rxe/rxe_task.h |    9 +++++----
 6 files changed, 17 insertions(+), 18 deletions(-)
drivers/infiniband/sw/rxe/rxe_comp.c +1 -2
@@ -571,9 +571,8 @@ static void free_pkt(struct rxe_pkt_info
 	ib_device_put(dev);
 }
 
-int rxe_completer(void *arg)
+int rxe_completer(struct rxe_qp *qp)
 {
-	struct rxe_qp *qp = (struct rxe_qp *)arg;
 	struct rxe_dev *rxe = to_rdev(qp->ibqp.device);
 	struct rxe_send_wqe *wqe = NULL;
 	struct sk_buff *skb = NULL;
drivers/infiniband/sw/rxe/rxe_loc.h +3 -3
@@ -171,9 +171,9 @@ void rxe_srq_cleanup(struct rxe_pool_ele
 
 void rxe_dealloc(struct ib_device *ib_dev);
 
-int rxe_completer(void *arg);
-int rxe_requester(void *arg);
-int rxe_responder(void *arg);
+int rxe_completer(struct rxe_qp *qp);
+int rxe_requester(struct rxe_qp *qp);
+int rxe_responder(struct rxe_qp *qp);
 
 /* rxe_icrc.c */
 int rxe_icrc_init(struct rxe_dev *rxe);
drivers/infiniband/sw/rxe/rxe_req.c +1 -2
@@ -635,9 +635,8 @@ static int rxe_do_local_ops(struct rxe_q
 	return 0;
 }
 
-int rxe_requester(void *arg)
+int rxe_requester(struct rxe_qp *qp)
 {
-	struct rxe_qp *qp = (struct rxe_qp *)arg;
 	struct rxe_dev *rxe = to_rdev(qp->ibqp.device);
 	struct rxe_pkt_info pkt;
 	struct sk_buff *skb;
drivers/infiniband/sw/rxe/rxe_resp.c +1 -2
@@ -1439,9 +1439,8 @@ static void rxe_drain_req_pkts(struct rx
 		queue_advance_consumer(q, q->type);
 }
 
-int rxe_responder(void *arg)
+int rxe_responder(struct rxe_qp *qp)
 {
-	struct rxe_qp *qp = (struct rxe_qp *)arg;
 	struct rxe_dev *rxe = to_rdev(qp->ibqp.device);
 	enum resp_states state;
 	struct rxe_pkt_info *pkt = NULL;
drivers/infiniband/sw/rxe/rxe_task.c +6 -5
@@ -11,7 +11,7 @@ int __rxe_do_task(struct rxe_task *task)
 {
 	int ret;
 
-	while ((ret = task->func(task->arg)) == 0)
+	while ((ret = task->func(task->qp)) == 0)
 		;
 
 	task->ret = ret;
@@ -29,7 +29,7 @@ static void do_task(struct tasklet_struc
 	int cont;
 	int ret;
 	struct rxe_task *task = from_tasklet(task, t, tasklet);
-	struct rxe_qp *qp = (struct rxe_qp *)task->arg;
+	struct rxe_qp *qp = (struct rxe_qp *)task->qp;
 	unsigned int iterations = RXE_MAX_ITERATIONS;
 
 	spin_lock_bh(&task->lock);
@@ -54,7 +54,7 @@ static void do_task(struct tasklet_struc
 
 	do {
 		cont = 0;
-		ret = task->func(task->arg);
+		ret = task->func(task->qp);
 
 		spin_lock_bh(&task->lock);
 		switch (task->state) {
@@ -91,9 +91,10 @@ static void do_task(struct tasklet_struc
 	task->ret = ret;
 }
 
-int rxe_init_task(struct rxe_task *task, void *arg, int (*func)(void *))
+int rxe_init_task(struct rxe_task *task, struct rxe_qp *qp,
+		  int (*func)(struct rxe_qp *))
 {
-	task->arg	= arg;
+	task->qp	= qp;
 	task->func	= func;
 	task->destroyed	= false;
 
drivers/infiniband/sw/rxe/rxe_task.h +5 -4
@@ -22,18 +22,19 @@ struct rxe_task {
 	struct tasklet_struct	tasklet;
 	int			state;
 	spinlock_t		lock;
-	void			*arg;
-	int			(*func)(void *arg);
+	struct rxe_qp		*qp;
+	int			(*func)(struct rxe_qp *qp);
 	int			ret;
 	bool			destroyed;
 };
 
 /*
  * init rxe_task structure
- *	arg  => parameter to pass to fcn
+ *	qp  => parameter to pass to func
  *	func => function to call until it returns != 0
  */
-int rxe_init_task(struct rxe_task *task, void *arg, int (*func)(void *));
+int rxe_init_task(struct rxe_task *task, struct rxe_qp *qp,
+		  int (*func)(struct rxe_qp *));
 
 /* cleanup task */
 void rxe_cleanup_task(struct rxe_task *task);
author maintainer
#623 lore raw

PATCH 621/694 RDMA/rxe: Remove __rxe_do_task()

In reply to Greg Kroah-Hartman

From: Bob Pearson <[email protected]>

[ Upstream commit 960ebe97e5238565d15063c8f4d1b2108efe2e65 ]

The subroutine __rxe_do_task is not thread safe and it has no way to guarantee that the tasks, which are designed with the assumption that they are non-reentrant, are not reentered. All of its uses are non-performance critical.

This patch replaces calls to __rxe_do_task with calls to rxe_sched_task. It also removes irrelevant or unneeded if tests.

Instead of calling the task machinery a single call to the tasklet function (rxe_requester, etc.) is sufficient to draing the queues if task execution has been disabled or stopped.

Together these changes allow the removal of __rxe_do_task.

Stable-dep-of: b2b1ddc45745 ("RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"")

---
 drivers/infiniband/sw/rxe/rxe_qp.c   | 56 +++++++++-------------------
 drivers/infiniband/sw/rxe/rxe_task.c | 13 -------
 drivers/infiniband/sw/rxe/rxe_task.h |  6 ---
 3 files changed, 17 insertions(+), 58 deletions(-)
drivers/infiniband/sw/rxe/rxe_qp.c +17 -39
index c954dd9394baf..49891f8ed4e61 100644
@@ -473,29 +473,23 @@ static void rxe_qp_reset(struct rxe_qp *qp)
 {
 	/* stop tasks from running */
 	rxe_disable_task(&qp->resp.task);
-
-	/* stop request/comp */
-	if (qp->sq.queue) {
-		if (qp_type(qp) == IB_QPT_RC)
-			rxe_disable_task(&qp->comp.task);
-		rxe_disable_task(&qp->req.task);
-	}
+	rxe_disable_task(&qp->comp.task);
+	rxe_disable_task(&qp->req.task);
 
 	/* move qp to the reset state */
 	qp->req.state = QP_STATE_RESET;
 	qp->comp.state = QP_STATE_RESET;
 	qp->resp.state = QP_STATE_RESET;
 
-	/* let state machines reset themselves drain work and packet queues
-	 * etc.
-	 */
-	__rxe_do_task(&qp->resp.task);
+	/* drain work and packet queuesc */
+	rxe_requester(qp);
+	rxe_completer(qp);
+	rxe_responder(qp);
 
-	if (qp->sq.queue) {
-		__rxe_do_task(&qp->comp.task);
-		__rxe_do_task(&qp->req.task);
+	if (qp->rq.queue)
+		rxe_queue_reset(qp->rq.queue);
+	if (qp->sq.queue)
 		rxe_queue_reset(qp->sq.queue);
-	}
 
 	/* cleanup attributes */
 	atomic_set(&qp->ssn, 0);
@@ -518,13 +512,8 @@ static void rxe_qp_reset(struct rxe_qp *qp)
 
 	/* reenable tasks */
 	rxe_enable_task(&qp->resp.task);
-
-	if (qp->sq.queue) {
-		if (qp_type(qp) == IB_QPT_RC)
-			rxe_enable_task(&qp->comp.task);
-
-		rxe_enable_task(&qp->req.task);
-	}
+	rxe_enable_task(&qp->comp.task);
+	rxe_enable_task(&qp->req.task);
 }
 
 /* drain the send queue */
@@ -533,10 +522,7 @@ static void rxe_qp_drain(struct rxe_qp *qp)
 	if (qp->sq.queue) {
 		if (qp->req.state != QP_STATE_DRAINED) {
 			qp->req.state = QP_STATE_DRAIN;
-			if (qp_type(qp) == IB_QPT_RC)
-				rxe_sched_task(&qp->comp.task);
-			else
-				__rxe_do_task(&qp->comp.task);
+			rxe_sched_task(&qp->comp.task);
 			rxe_sched_task(&qp->req.task);
 		}
 	}
@@ -552,11 +538,7 @@ void rxe_qp_error(struct rxe_qp *qp)
 
 	/* drain work and packet queues */
 	rxe_sched_task(&qp->resp.task);
-
-	if (qp_type(qp) == IB_QPT_RC)
-		rxe_sched_task(&qp->comp.task);
-	else
-		__rxe_do_task(&qp->comp.task);
+	rxe_sched_task(&qp->comp.task);
 	rxe_sched_task(&qp->req.task);
 }
 
@@ -773,24 +755,20 @@ static void rxe_qp_do_cleanup(struct work_struct *work)
 
 	qp->valid = 0;
 	qp->qp_timeout_jiffies = 0;
-	rxe_cleanup_task(&qp->resp.task);
 
 	if (qp_type(qp) == IB_QPT_RC) {
 		del_timer_sync(&qp->retrans_timer);
 		del_timer_sync(&qp->rnr_nak_timer);
 	}
 
+	rxe_cleanup_task(&qp->resp.task);
 	rxe_cleanup_task(&qp->req.task);
 	rxe_cleanup_task(&qp->comp.task);
 
 	/* flush out any receive wr's or pending requests */
-	if (qp->req.task.func)
-		__rxe_do_task(&qp->req.task);
-
-	if (qp->sq.queue) {
-		__rxe_do_task(&qp->comp.task);
-		__rxe_do_task(&qp->req.task);
-	}
+	rxe_requester(qp);
+	rxe_completer(qp);
+	rxe_responder(qp);
 
 	if (qp->sq.queue)
 		rxe_queue_cleanup(qp->sq.queue);
drivers/infiniband/sw/rxe/rxe_task.c +0 -13
index 959cc6229a34e..a67f485454436 100644
@@ -6,19 +6,6 @@
 
 #include "rxe.h"
 
-int __rxe_do_task(struct rxe_task *task)
-
-{
-	int ret;
-
-	while ((ret = task->func(task->qp)) == 0)
-		;
-
-	task->ret = ret;
-
-	return ret;
-}
-
 /*
  * this locking is due to a potential race where
  * a second caller finds the task already running
drivers/infiniband/sw/rxe/rxe_task.h +0 -6
index 41efd5fd49b03..99585e40cef92 100644
@@ -39,12 +39,6 @@ int rxe_init_task(struct rxe_task *task, struct rxe_qp *qp,
 /* cleanup task */
 void rxe_cleanup_task(struct rxe_task *task);
 
-/*
- * raw call to func in loop without any checking
- * can call when tasklets are disabled
- */
-int __rxe_do_task(struct rxe_task *task);
-
 void rxe_run_task(struct rxe_task *task);
 
 void rxe_sched_task(struct rxe_task *task);
Signature · 1 line
2.39.2
author maintainer
#624 lore raw

PATCH 622/694 RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"

In reply to Greg Kroah-Hartman

From: Zhu Yanjun <[email protected]>

[ Upstream commit b2b1ddc457458fecd1c6f385baa9fbda5f0c63ad ]

In the function rxe_create_qp(), rxe_qp_from_init() is called to initialize qp, internally things like rxe_init_task are not setup until rxe_qp_init_req().

If an error occurred before this point then the unwind will call rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task() which will oops when trying to access the uninitialized spinlock.

If rxe_init_task is not executed, rxe_cleanup_task will not be called.

Reported-by [email protected]
Fixes 8700e3e7c485 ("Soft RoCE driver")
Fixes 2d4b21e0a291 ("IB/rxe: Prevent from completer to operate on non valid QP")
---
 drivers/infiniband/sw/rxe/rxe_qp.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/infiniband/sw/rxe/rxe_qp.c +8 -3
index 49891f8ed4e61..d5de5ba6940f1 100644
@@ -761,9 +761,14 @@ static void rxe_qp_do_cleanup(struct work_struct *work)
 		del_timer_sync(&qp->rnr_nak_timer);
 	}
 
-	rxe_cleanup_task(&qp->resp.task);
-	rxe_cleanup_task(&qp->req.task);
-	rxe_cleanup_task(&qp->comp.task);
+	if (qp->resp.task.func)
+		rxe_cleanup_task(&qp->resp.task);
+
+	if (qp->req.task.func)
+		rxe_cleanup_task(&qp->req.task);
+
+	if (qp->comp.task.func)
+		rxe_cleanup_task(&qp->comp.task);
 
 	/* flush out any receive wr's or pending requests */
 	rxe_requester(qp);
Signature · 1 line
2.39.2
author maintainer
#625 lore raw

PATCH 623/694 RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR

In reply to Greg Kroah-Hartman

From: Avihai Horon <[email protected]>

[ Upstream commit d43b020b0f82c088ef8ff3196ef00575a97d200e ]

relaxed_ordering_read HCA capability is set if both the device supports relaxed ordering (RO) read and RO is set in PCI config space.

RO in PCI config space can change during runtime. This will change the value of relaxed_ordering_read HCA capability in FW, but the driver will not see it since it queries the capabilities only once.

This can lead to the following scenario:
1. RO in PCI config space is enabled.
2. User creates MKey without RO.
3. RO in PCI config space is disabled.
As a result, relaxed_ordering_read HCA capability is turned off in FW but remains on in driver copy of the capabilities.
4. User requests to reconfig the MKey with RO via UMR.
5. Driver will try to reconfig the MKey with RO read although it shouldn't (as relaxed_ordering_read HCA capability is really off).

To fix this, check pcie_relaxed_ordering_enabled() before setting RO read in UMR.

---
 drivers/infiniband/hw/mlx5/umr.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mlx5/umr.c +4 -2
index 55f4e048d9474..c9e176e8ced46 100644
@@ -380,6 +380,9 @@ static void mlx5r_umr_set_access_flags(struct mlx5_ib_dev *dev,
 				       struct mlx5_mkey_seg *seg,
 				       unsigned int access_flags)
 {
+	bool ro_read = (access_flags & IB_ACCESS_RELAXED_ORDERING) &&
+		       pcie_relaxed_ordering_enabled(dev->mdev->pdev);
+
 	MLX5_SET(mkc, seg, a, !!(access_flags & IB_ACCESS_REMOTE_ATOMIC));
 	MLX5_SET(mkc, seg, rw, !!(access_flags & IB_ACCESS_REMOTE_WRITE));
 	MLX5_SET(mkc, seg, rr, !!(access_flags & IB_ACCESS_REMOTE_READ));
@@ -387,8 +390,7 @@ static void mlx5r_umr_set_access_flags(struct mlx5_ib_dev *dev,
 	MLX5_SET(mkc, seg, lr, 1);
 	MLX5_SET(mkc, seg, relaxed_ordering_write,
 		 !!(access_flags & IB_ACCESS_RELAXED_ORDERING));
-	MLX5_SET(mkc, seg, relaxed_ordering_read,
-		 !!(access_flags & IB_ACCESS_RELAXED_ORDERING));
+	MLX5_SET(mkc, seg, relaxed_ordering_read, ro_read);
 }
 
 int mlx5r_umr_rereg_pd_access(struct mlx5_ib_mr *mr, struct ib_pd *pd,
Signature · 1 line
2.39.2
author maintainer
#626 lore raw

PATCH 624/694 RDMA/mlx5: Fix flow counter query via DEVX

In reply to Greg Kroah-Hartman

From: Mark Bloch <[email protected]>

[ Upstream commit 3e358ea8614ddfbc59ca7a3f5dff5dde2b350b2c ]

Commit cited in "fixes" tag added bulk support for flow counters but it didn't account that's also possible to query a counter using a non-base id if the counter was allocated as bulk.

When a user performs a query, validate the flow counter id given in the mailbox is inside the valid range taking bulk value into account.

---
 drivers/infiniband/hw/mlx5/devx.c | 31 ++++++++++++++++++++++++++-----
 include/linux/mlx5/mlx5_ifc.h     |  3 ++-
 2 files changed, 28 insertions(+), 6 deletions(-)
drivers/infiniband/hw/mlx5/devx.c +26 -5
index 2211a0be16f36..f8e2baed27a5c 100644
@@ -666,7 +666,21 @@ static bool devx_is_valid_obj_id(struct uverbs_attr_bundle *attrs,
 				      obj_id;
 
 	case MLX5_IB_OBJECT_DEVX_OBJ:
-		return ((struct devx_obj *)uobj->object)->obj_id == obj_id;
+	{
+		u16 opcode = MLX5_GET(general_obj_in_cmd_hdr, in, opcode);
+		struct devx_obj *devx_uobj = uobj->object;
+
+		if (opcode == MLX5_CMD_OP_QUERY_FLOW_COUNTER &&
+		    devx_uobj->flow_counter_bulk_size) {
+			u64 end;
+
+			end = devx_uobj->obj_id +
+				devx_uobj->flow_counter_bulk_size;
+			return devx_uobj->obj_id <= obj_id && end > obj_id;
+		}
+
+		return devx_uobj->obj_id == obj_id;
+	}
 
 	default:
 		return false;
@@ -1517,10 +1531,17 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_OBJ_CREATE)(
 		goto obj_free;
 
 	if (opcode == MLX5_CMD_OP_ALLOC_FLOW_COUNTER) {
-		u8 bulk = MLX5_GET(alloc_flow_counter_in,
-				   cmd_in,
-				   flow_counter_bulk);
-		obj->flow_counter_bulk_size = 128UL * bulk;
+		u32 bulk = MLX5_GET(alloc_flow_counter_in,
+				    cmd_in,
+				    flow_counter_bulk_log_size);
+
+		if (bulk)
+			bulk = 1 << bulk;
+		else
+			bulk = 128UL * MLX5_GET(alloc_flow_counter_in,
+						cmd_in,
+						flow_counter_bulk);
+		obj->flow_counter_bulk_size = bulk;
 	}
 
 	uobj->object = obj;
include/linux/mlx5/mlx5_ifc.h +2 -1
index 66d76e97a0876..1636d7f65630a 100644
@@ -9271,7 +9271,8 @@ struct mlx5_ifc_alloc_flow_counter_in_bits {
 	u8         reserved_at_20[0x10];
 	u8         op_mod[0x10];
 
-	u8         reserved_at_40[0x38];
+	u8         reserved_at_40[0x33];
+	u8         flow_counter_bulk_log_size[0x5];
 	u8         flow_counter_bulk[0x8];
 };
 
Signature · 1 line
2.39.2
author maintainer
#627 lore raw

PATCH 625/694 SUNRPC: remove the maximum number of retries in call_bind_status

In reply to Greg Kroah-Hartman

From: Dai Ngo <[email protected]>

[ Upstream commit 691d0b782066a6eeeecbfceb7910a8f6184e6105 ]

Currently call_bind_status places a hard limit of 3 to the number of retries on EACCES error. This limit was done to prevent NLM unlock requests from being hang forever when the server keeps returning garbage. However this change causes problem for cases when NLM service takes longer than 9 seconds to register with the port mapper after a restart.

This patch removes this hard coded limit and let the RPC handles the retry based on the standard hard/soft task semantics.

Fixes 0b760113a3a1 ("NLM: Don't hang forever on NLM unlock requests")
---
 include/linux/sunrpc/sched.h | 3 +--
 net/sunrpc/clnt.c            | 3 ---
 net/sunrpc/sched.c           | 1 -
 3 files changed, 1 insertion(+), 6 deletions(-)
include/linux/sunrpc/sched.h +1 -2
index b8ca3ecaf8d76..8ada7dc802d30 100644
@@ -90,8 +90,7 @@ struct rpc_task {
 #endif
 	unsigned char		tk_priority : 2,/* Task priority */
 				tk_garb_retry : 2,
-				tk_cred_retry : 2,
-				tk_rebind_retry : 2;
+				tk_cred_retry : 2;
 };
 
 typedef void			(*rpc_action)(struct rpc_task *);
net/sunrpc/clnt.c +0 -3
index fd7e1c630493e..d2ee566343083 100644
@@ -2050,9 +2050,6 @@ call_bind_status(struct rpc_task *task)
 			status = -EOPNOTSUPP;
 			break;
 		}
-		if (task->tk_rebind_retry == 0)
-			break;
-		task->tk_rebind_retry--;
 		rpc_delay(task, 3*HZ);
 		goto retry_timeout;
 	case -ENOBUFS:
net/sunrpc/sched.c +0 -1
index be587a308e05a..c8321de341eea 100644
@@ -817,7 +817,6 @@ rpc_init_task_statistics(struct rpc_task *task)
 	/* Initialize retry counters */
 	task->tk_garb_retry = 2;
 	task->tk_cred_retry = 2;
-	task->tk_rebind_retry = 2;
 
 	/* starting timestamp */
 	task->tk_start = ktime_get();
Signature · 1 line
2.39.2
author maintainer
#628 lore raw

PATCH 626/694 RDMA/mlx5: Use correct device num_ports when modify DC

In reply to Greg Kroah-Hartman

From: Mark Zhang <[email protected]>

[ Upstream commit 746aa3c8cb1a650ff2583497ac646e505831b9b9 ]

Just like other QP types, when modify DC, the port_num should be compared with dev->num_ports, instead of HCA_CAP.num_ports. Otherwise Multi-port vHCA on DC may not work.

---
 drivers/infiniband/hw/mlx5/qp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/mlx5/qp.c +1 -1
index 7cc3b973dec7b..86284aba3470d 100644
@@ -4485,7 +4485,7 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 			return -EINVAL;
 
 		if (attr->port_num == 0 ||
-		    attr->port_num > MLX5_CAP_GEN(dev->mdev, num_ports)) {
+		    attr->port_num > dev->num_ports) {
 			mlx5_ib_dbg(dev, "invalid port number %d. number of ports is %d\n",
 				    attr->port_num, dev->num_ports);
 			return -EINVAL;
Signature · 1 line
2.39.2
author maintainer
#629 lore raw

PATCH 627/694 clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails

In reply to Greg Kroah-Hartman

From: Qinrun Dai <[email protected]>

[ Upstream commit fb73556386e074e9bee9fa2d253aeaefe4e063e0 ]

Smatch reports:
drivers/clocksource/timer-davinci.c:332 davinci_timer_register()
warn: 'base' from ioremap() not released on lines: 274.

Fix this and other potential memory leak problems
by adding a set of corresponding exit lables.

Fixes 721154f972aa ("clocksource/drivers/davinci: Add support for clockevents")
---
 drivers/clocksource/timer-davinci.c | 30 +++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)
drivers/clocksource/timer-davinci.c +24 -6
index 9996c05425200..b1c248498be46 100644
@@ -257,21 +257,25 @@ int __init davinci_timer_register(struct clk *clk,
 				resource_size(&timer_cfg->reg),
 				"davinci-timer")) {
 		pr_err("Unable to request memory region\n");
-		return -EBUSY;
+		rv = -EBUSY;
+		goto exit_clk_disable;
 	}
 
 	base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg));
 	if (!base) {
 		pr_err("Unable to map the register range\n");
-		return -ENOMEM;
+		rv = -ENOMEM;
+		goto exit_mem_region;
 	}
 
 	davinci_timer_init(base);
 	tick_rate = clk_get_rate(clk);
 
 	clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL);
-	if (!clockevent)
-		return -ENOMEM;
+	if (!clockevent) {
+		rv = -ENOMEM;
+		goto exit_iounmap_base;
+	}
 
 	clockevent->dev.name = "tim12";
 	clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT;
@@ -296,7 +300,7 @@ int __init davinci_timer_register(struct clk *clk,
 			 "clockevent/tim12", clockevent);
 	if (rv) {
 		pr_err("Unable to request the clockevent interrupt\n");
-		return rv;
+		goto exit_free_clockevent;
 	}
 
 	davinci_clocksource.dev.rating = 300;
@@ -323,13 +327,27 @@ int __init davinci_timer_register(struct clk *clk,
 	rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate);
 	if (rv) {
 		pr_err("Unable to register clocksource\n");
-		return rv;
+		goto exit_free_irq;
 	}
 
 	sched_clock_register(davinci_timer_read_sched_clock,
 			     DAVINCI_TIMER_CLKSRC_BITS, tick_rate);
 
 	return 0;
+
+exit_free_irq:
+	free_irq(timer_cfg->irq[DAVINCI_TIMER_CLOCKEVENT_IRQ].start,
+			clockevent);
+exit_free_clockevent:
+	kfree(clockevent);
+exit_iounmap_base:
+	iounmap(base);
+exit_mem_region:
+	release_mem_region(timer_cfg->reg.start,
+			   resource_size(&timer_cfg->reg));
+exit_clk_disable:
+	clk_disable_unprepare(clk);
+	return rv;
 }
 
 static int __init of_davinci_timer_register(struct device_node *np)
Signature · 1 line
2.39.2
author maintainer
#630 lore raw

PATCH 628/694 openrisc: Properly store r31 to pt_regs on unhandled exceptions

In reply to Greg Kroah-Hartman

From: Stafford Horne <[email protected]>

[ Upstream commit 812489ac4dd91144a74ce65ecf232252a2e406fb ]

In commit 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") the unhandled exception path was changed to do an early store of r30 instead of r31. The entry code was not updated and r31 is not getting stored to pt_regs.

This patch updates the entry handler to store r31 instead of r30. We also remove some misleading commented out store r30 and r31 instructrions.

I noticed this while working on adding floating point exception handling, This issue probably would never impact anything since we kill the process or Oops right away on unhandled exceptions.

Fixes 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception")
---
 arch/openrisc/kernel/entry.S | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
arch/openrisc/kernel/entry.S +2 -4
index 54a87bba35caa..a130c4dac48d3 100644
@@ -173,7 +173,6 @@ handler:							;\
 	l.sw    PT_GPR28(r1),r28					;\
 	l.sw    PT_GPR29(r1),r29					;\
 	/* r30 already save */					;\
-/*        l.sw    PT_GPR30(r1),r30*/					;\
 	l.sw    PT_GPR31(r1),r31					;\
 	TRACE_IRQS_OFF_ENTRY						;\
 	/* Store -1 in orig_gpr11 for non-syscall exceptions */	;\
@@ -211,9 +210,8 @@ handler:							;\
 	l.sw    PT_GPR27(r1),r27					;\
 	l.sw    PT_GPR28(r1),r28					;\
 	l.sw    PT_GPR29(r1),r29					;\
-	/* r31 already saved */					;\
-	l.sw    PT_GPR30(r1),r30					;\
-/*        l.sw    PT_GPR31(r1),r31	*/				;\
+	/* r30 already saved */						;\
+	l.sw    PT_GPR31(r1),r31					;\
 	/* Store -1 in orig_gpr11 for non-syscall exceptions */	;\
 	l.addi	r30,r0,-1					;\
 	l.sw	PT_ORIG_GPR11(r1),r30				;\
Signature · 1 line
2.39.2
author maintainer
#631 lore raw

PATCH 629/694 timekeeping: Fix references to nonexistent ktime_get_fast_ns()

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 158009f1b4a33bc0f354b994eea361362bd83226 ]

There was never a function named ktime_get_fast_ns(). Presumably these should refer to ktime_get_mono_fast_ns() instead.

---
 kernel/time/timekeeping.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/time/timekeeping.c +2 -2
index 5579ead449f25..09d594900ee0b 100644
@@ -526,7 +526,7 @@ EXPORT_SYMBOL_GPL(ktime_get_raw_fast_ns);
  * partially updated.  Since the tk->offs_boot update is a rare event, this
  * should be a rare occurrence which postprocessing should be able to handle.
  *
- * The caveats vs. timestamp ordering as documented for ktime_get_fast_ns()
+ * The caveats vs. timestamp ordering as documented for ktime_get_mono_fast_ns()
  * apply as well.
  */
 u64 notrace ktime_get_boot_fast_ns(void)
@@ -576,7 +576,7 @@ static __always_inline u64 __ktime_get_real_fast(struct tk_fast *tkf, u64 *mono)
 /**
  * ktime_get_real_fast_ns: - NMI safe and fast access to clock realtime.
  *
- * See ktime_get_fast_ns() for documentation of the time stamp ordering.
+ * See ktime_get_mono_fast_ns() for documentation of the time stamp ordering.
  */
 u64 ktime_get_real_fast_ns(void)
 {
Signature · 1 line
2.39.2
author maintainer
#632 lore raw

PATCH 630/694 SMB3: Add missing locks to protect deferred close file list

In reply to Greg Kroah-Hartman

From: Bharath SM <[email protected]>

[ Upstream commit ab9ddc87a9055c4bebd6524d5d761d605d52e557 ]

cifs_del_deferred_close function has a critical section which modifies the deferred close file list. We must acquire deferred_lock before calling cifs_del_deferred_close function.

Fixes ca08d0eac020 ("cifs: Fix memory leak on the deferred close")
---
 fs/cifs/misc.c | 6 ++++++
 1 file changed, 6 insertions(+)
fs/cifs/misc.c +6 -0
index 7f085ed2d866b..f76e9bb7d7423 100644
@@ -749,7 +749,9 @@ cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode)
 	list_for_each_entry(cfile, &cifs_inode->openFileList, flist) {
 		if (delayed_work_pending(&cfile->deferred)) {
 			if (cancel_delayed_work(&cfile->deferred)) {
+				spin_lock(&cifs_inode->deferred_lock);
 				cifs_del_deferred_close(cfile);
+				spin_unlock(&cifs_inode->deferred_lock);
 
 				tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC);
 				if (tmp_list == NULL)
@@ -780,7 +782,9 @@ cifs_close_all_deferred_files(struct cifs_tcon *tcon)
 	list_for_each_entry(cfile, &tcon->openFileList, tlist) {
 		if (delayed_work_pending(&cfile->deferred)) {
 			if (cancel_delayed_work(&cfile->deferred)) {
+				spin_lock(&CIFS_I(d_inode(cfile->dentry))->deferred_lock);
 				cifs_del_deferred_close(cfile);
+				spin_unlock(&CIFS_I(d_inode(cfile->dentry))->deferred_lock);
 
 				tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC);
 				if (tmp_list == NULL)
@@ -815,7 +819,9 @@ cifs_close_deferred_file_under_dentry(struct cifs_tcon *tcon, const char *path)
 		if (strstr(full_path, path)) {
 			if (delayed_work_pending(&cfile->deferred)) {
 				if (cancel_delayed_work(&cfile->deferred)) {
+					spin_lock(&CIFS_I(d_inode(cfile->dentry))->deferred_lock);
 					cifs_del_deferred_close(cfile);
+					spin_unlock(&CIFS_I(d_inode(cfile->dentry))->deferred_lock);
 
 					tmp_list = kmalloc(sizeof(struct file_list), GFP_ATOMIC);
 					if (tmp_list == NULL)
Signature · 1 line
2.39.2
author maintainer
#633 lore raw

PATCH 631/694 SMB3: Close deferred file handles in case of handle lease break

In reply to Greg Kroah-Hartman

From: Bharath SM <[email protected]>

[ Upstream commit d906be3fa571f6fc9381911304a0eca99f1b6951 ]

We should not cache deferred file handles if we dont have handle lease on a file. And we should immediately close all deferred handles in case of handle lease break.

Fixes 9e31678fb403 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
---
 fs/cifs/file.c | 16 ++++++++++++++++
 fs/cifs/misc.c |  2 +-
 2 files changed, 17 insertions(+), 1 deletion(-)
fs/cifs/file.c +16 -0
index b33d2e7b0f984..c5fcefdfd7976 100644
@@ -4882,6 +4882,8 @@ void cifs_oplock_break(struct work_struct *work)
 	struct TCP_Server_Info *server = tcon->ses->server;
 	int rc = 0;
 	bool purge_cache = false;
+	struct cifs_deferred_close *dclose;
+	bool is_deferred = false;
 
 	wait_on_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS,
 			TASK_UNINTERRUPTIBLE);
@@ -4917,6 +4919,20 @@ void cifs_oplock_break(struct work_struct *work)
 		cifs_dbg(VFS, "Push locks rc = %d\n", rc);
 
 oplock_break_ack:
+	/*
+	 * When oplock break is received and there are no active
+	 * file handles but cached, then schedule deferred close immediately.
+	 * So, new open will not use cached handle.
+	 */
+	spin_lock(&CIFS_I(inode)->deferred_lock);
+	is_deferred = cifs_is_deferred_close(cfile, &dclose);
+	spin_unlock(&CIFS_I(inode)->deferred_lock);
+
+	if (!CIFS_CACHE_HANDLE(cinode) && is_deferred &&
+			cfile->deferred_close_scheduled && delayed_work_pending(&cfile->deferred)) {
+		cifs_close_deferred_file(cinode);
+	}
+
 	/*
 	 * releasing stale oplock after recent reconnect of smb session using
 	 * a now incorrect file handle is not a data integrity issue but do
fs/cifs/misc.c +1 -1
index f76e9bb7d7423..cd914be905b24 100644
@@ -764,7 +764,7 @@ cifs_close_deferred_file(struct cifsInodeInfo *cifs_inode)
 	spin_unlock(&cifs_inode->open_file_lock);
 
 	list_for_each_entry_safe(tmp_list, tmp_next_list, &file_head, list) {
-		_cifsFileInfo_put(tmp_list->cfile, true, false);
+		_cifsFileInfo_put(tmp_list->cfile, false, false);
 		list_del(&tmp_list->list);
 		kfree(tmp_list);
 	}
Signature · 1 line
2.39.2
author maintainer
#634 lore raw

PATCH 632/694 rtc: jz4740: Make sure clock provider gets removed

In reply to Greg Kroah-Hartman

From: Lars-Peter Clausen <[email protected]>

[ Upstream commit c7a639dac8e4d7e63450bef2f3a19fb331566fb1 ]

The jz4740 RTC driver registers a clock provider, but never removes it. This leaves a stale clock provider behind that references freed clocks when the device is unbound.

Use the managed devm_of_clk_add_hw_provider() instead of of_clk_add_hw_provider() to make sure the provider gets automatically removed on unbind.

Fixes 5ddfa148de8c ("rtc: jz4740: Register clock provider for the CLK32K pin")
---
 drivers/rtc/rtc-jz4740.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/rtc/rtc-jz4740.c +2 -1
index 59d279e3e6f5b..36453b008139b 100644
@@ -414,7 +414,8 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
 			return dev_err_probe(dev, ret,
 					     "Unable to register clk32k clock\n");
 
-		ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &rtc->clk32k);
+		ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+						  &rtc->clk32k);
 		if (ret)
 			return dev_err_probe(dev, ret,
 					     "Unable to register clk32k clock provider\n");
Signature · 1 line
2.39.2
author maintainer
#635 lore raw

PATCH 633/694 ext4: fix i_disksize exceeding i_size problem in paritally written case

In reply to Greg Kroah-Hartman

From: Zhihao Cheng <[email protected]>

[ Upstream commit 1dedde690303c05ef732b7c5c8356fdf60a4ade3 ]

It is possible for i_disksize can exceed i_size, triggering a warning.

generic_perform_write
copied = iov_iter_copy_from_user_atomic(len) // copied < len ext4_da_write_end

 | ext4_update_i_disksize
 |  new_i_size = pos + copied;
 |  WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize
 | generic_write_end
 |  copied = block_write_end(copied, len) // copied = 0
 |   if (unlikely(copied < len))
 |    if (!PageUptodate(page))
 |     copied = 0;
 |  if (pos + copied > inode->i_size) // return false

if (unlikely(copied == 0))
goto again;
if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
status = -EFAULT;
break;
}

We get i_disksize greater than i_size here, which could trigger WARNING check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio:

ext4_dio_write_iter
iomap_dio_rw
__iomap_dio_rw // return err, length is not aligned to 512
ext4_handle_inode_extension
WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops

 WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319
 CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2
 RIP: 0010:ext4_file_write_iter+0xbc7
 Call Trace:
  vfs_write+0x3b1
  ksys_write+0x77
  do_syscall_64+0x39

Fix it by updating 'copied' value before updating i_disksize just like ext4_write_inline_data_end() does.

A reproducer can be found in the buganizer link below.

---
 fs/ext4/inode.c | 3 +++
 1 file changed, 3 insertions(+)
fs/ext4/inode.c +3 -0
index bf0b7dea4900a..41ba1c4328449 100644
@@ -3148,6 +3148,9 @@ static int ext4_da_write_end(struct file *file,
 	    ext4_has_inline_data(inode))
 		return ext4_write_inline_data_end(inode, pos, len, copied, page);
 
+	if (unlikely(copied < len) && !PageUptodate(page))
+		copied = 0;
+
 	start = pos & (PAGE_SIZE - 1);
 	end = start + copied - 1;
 
Signature · 1 line
2.39.2
author maintainer
#636 lore raw

PATCH 634/694 ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline

In reply to Greg Kroah-Hartman

From: Ye Bin <[email protected]>

[ Upstream commit 835659598c67907b98cd2aa57bb951dfaf675c69 ]

Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================

BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067

CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
 print_address_description+0x74/0x340 mm/kasan/report.c:306
 print_report+0x107/0x1f0 mm/kasan/report.c:417
 kasan_report+0xcd/0x100 mm/kasan/report.c:517
 ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
 ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
 ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
 ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
 ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
 ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
 ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
 ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
 ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
 ext4_file_write_iter+0x1d0/0x18f0
 call_write_iter include/linux/fs.h:2186 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x7dc/0xc50 fs/read_write.c:584
 ksys_write+0x177/0x2a0 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

Above issue is happens when enable bigalloc and inline data feature. As commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for bigalloc + inline. But it only resolved issue when has inline data, if inline data has been converted to extent(ext4_da_convert_inline_data_to_extent) before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However i_data is still store inline data in this scene. Then will trigger UAF when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)" in ext4_clu_mapped().

Fixes 131294c35ed6 ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline")
Reported-by [email protected]
---
 fs/ext4/extents.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ext4/extents.c +2 -1
index 3559ea6b07818..74251eebf8313 100644
@@ -5802,7 +5802,8 @@ int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu)
 	 * mapped - no physical clusters have been allocated, and the
 	 * file has no extents
 	 */
-	if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
+	if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ||
+	    ext4_has_inline_data(inode))
 		return 0;
 
 	/* search for the extent closest to the first block in the cluster */
Signature · 1 line
2.39.2
author maintainer
#637 lore raw

PATCH 635/694 pinctrl: renesas: r8a779a0: Remove incorrect AVB[01] pinmux configuration

In reply to Greg Kroah-Hartman

From: Hai Pham <[email protected]>

[ Upstream commit a145c9a8674ac8fbfa1595276e1b6cbfc5139038 ]

AVB[01]_{MAGIC,MDC,MDIO,TXCREFCLK} are registered as both PINMUX_SINGLE(fn) and PINMUX_IPSR_GPSR(fn) in the pinmux_data array.

The latter are correct, hence remove the former.
Without this fix, the Ethernet PHY is not operational on the MDIO bus.

---
 drivers/pinctrl/renesas/pfc-r8a779a0.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/pinctrl/renesas/pfc-r8a779a0.c +0 -8
index 760c83a8740bd..6069869353bb4 100644
@@ -696,16 +696,8 @@ static const u16 pinmux_data[] = {
 	PINMUX_SINGLE(PCIE0_CLKREQ_N),
 
 	PINMUX_SINGLE(AVB0_PHY_INT),
-	PINMUX_SINGLE(AVB0_MAGIC),
-	PINMUX_SINGLE(AVB0_MDC),
-	PINMUX_SINGLE(AVB0_MDIO),
-	PINMUX_SINGLE(AVB0_TXCREFCLK),
 
 	PINMUX_SINGLE(AVB1_PHY_INT),
-	PINMUX_SINGLE(AVB1_MAGIC),
-	PINMUX_SINGLE(AVB1_MDC),
-	PINMUX_SINGLE(AVB1_MDIO),
-	PINMUX_SINGLE(AVB1_TXCREFCLK),
 
 	PINMUX_SINGLE(AVB2_AVTP_PPS),
 	PINMUX_SINGLE(AVB2_AVTP_CAPTURE),
Signature · 1 line
2.39.2
author maintainer
#638 lore raw

PATCH 636/694 pinctrl: renesas: r8a779f0: Fix tsn1_avtp_pps pin group

In reply to Greg Kroah-Hartman

From: Phong Hoang <[email protected]>

[ Upstream commit 60003351e99167d8cfa7c161e95856efc016f381 ]

Correct a typo mistake in the definition of the tsn1_avtp_pps pin group mux.

---
 drivers/pinctrl/renesas/pfc-r8a779f0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/renesas/pfc-r8a779f0.c +1 -1
index 417c357f16b19..65c141ce909ac 100644
@@ -1213,7 +1213,7 @@ static const unsigned int tsn1_avtp_pps_pins[] = {
 	RCAR_GP_PIN(3, 13),
 };
 static const unsigned int tsn1_avtp_pps_mux[] = {
-	TSN0_AVTP_PPS_MARK,
+	TSN1_AVTP_PPS_MARK,
 };
 static const unsigned int tsn1_avtp_capture_a_pins[] = {
 	/* TSN1_AVTP_CAPTURE_A */
Signature · 1 line
2.39.2
author maintainer
#639 lore raw

PATCH 637/694 pinctrl: renesas: r8a779g0: Fix Group 4/5 pin functions

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 0a7a5226e7b177c68800985a19a80c1df9bceff6 ]

According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin groups 4 and 5 do not use Module Select Registers to configure pin functions, but use Peripheral Function Select Registers instead.

Hence:
- Remove the non-existent Module Select Registers (MODSEL[45]),
- Add the missing Peripheral Function Select Registers (IPxSR[45]),
- Correct the GPIO / Peripheral Function Select Register definitions

    (GPSR]45_*),

- Correct the affected PINMUX definitions.

Fixes 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx")
Fixes 36fb7b8af55b83e0 ("pinctrl: renesas: r8a779g0: Add missing MODSELx for TSN0")
Fixes ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
---
 drivers/pinctrl/renesas/pfc-r8a779g0.c | 467 +++++++++++++++----------
 1 file changed, 279 insertions(+), 188 deletions(-)
drivers/pinctrl/renesas/pfc-r8a779g0.c +279 -188
index bf7fcce2d9c6b..bc1352d36d49f 100644
@@ -156,54 +156,54 @@
 #define GPSR3_0		F_(MMC_SD_D1,		IP0SR3_3_0)
 
 /* GPSR4 */
-#define GPSR4_24	FM(AVS1)
-#define GPSR4_23	FM(AVS0)
-#define GPSR4_22	FM(PCIE1_CLKREQ_N)
-#define GPSR4_21	FM(PCIE0_CLKREQ_N)
-#define GPSR4_20	FM(TSN0_TXCREFCLK)
-#define GPSR4_19	FM(TSN0_TD2)
-#define GPSR4_18	FM(TSN0_TD3)
-#define GPSR4_17	FM(TSN0_RD2)
-#define GPSR4_16	FM(TSN0_RD3)
-#define GPSR4_15	FM(TSN0_TD0)
-#define GPSR4_14	FM(TSN0_TD1)
-#define GPSR4_13	FM(TSN0_RD1)
-#define GPSR4_12	FM(TSN0_TXC)
-#define GPSR4_11	FM(TSN0_RXC)
-#define GPSR4_10	FM(TSN0_RD0)
-#define GPSR4_9		FM(TSN0_TX_CTL)
-#define GPSR4_8		FM(TSN0_AVTP_PPS0)
-#define GPSR4_7		FM(TSN0_RX_CTL)
-#define GPSR4_6		FM(TSN0_AVTP_CAPTURE)
-#define GPSR4_5		FM(TSN0_AVTP_MATCH)
-#define GPSR4_4		FM(TSN0_LINK)
-#define GPSR4_3		FM(TSN0_PHY_INT)
-#define GPSR4_2		FM(TSN0_AVTP_PPS1)
-#define GPSR4_1		FM(TSN0_MDC)
-#define GPSR4_0		FM(TSN0_MDIO)
+#define GPSR4_24	F_(AVS1,		IP3SR4_3_0)
+#define GPSR4_23	F_(AVS0,		IP2SR4_31_28)
+#define GPSR4_22	F_(PCIE1_CLKREQ_N,	IP2SR4_27_24)
+#define GPSR4_21	F_(PCIE0_CLKREQ_N,	IP2SR4_23_20)
+#define GPSR4_20	F_(TSN0_TXCREFCLK,	IP2SR4_19_16)
+#define GPSR4_19	F_(TSN0_TD2,		IP2SR4_15_12)
+#define GPSR4_18	F_(TSN0_TD3,		IP2SR4_11_8)
+#define GPSR4_17	F_(TSN0_RD2,		IP2SR4_7_4)
+#define GPSR4_16	F_(TSN0_RD3,		IP2SR4_3_0)
+#define GPSR4_15	F_(TSN0_TD0,		IP1SR4_31_28)
+#define GPSR4_14	F_(TSN0_TD1,		IP1SR4_27_24)
+#define GPSR4_13	F_(TSN0_RD1,		IP1SR4_23_20)
+#define GPSR4_12	F_(TSN0_TXC,		IP1SR4_19_16)
+#define GPSR4_11	F_(TSN0_RXC,		IP1SR4_15_12)
+#define GPSR4_10	F_(TSN0_RD0,		IP1SR4_11_8)
+#define GPSR4_9		F_(TSN0_TX_CTL,		IP1SR4_7_4)
+#define GPSR4_8		F_(TSN0_AVTP_PPS0,	IP1SR4_3_0)
+#define GPSR4_7		F_(TSN0_RX_CTL,		IP0SR4_31_28)
+#define GPSR4_6		F_(TSN0_AVTP_CAPTURE,	IP0SR4_27_24)
+#define GPSR4_5		F_(TSN0_AVTP_MATCH,	IP0SR4_23_20)
+#define GPSR4_4		F_(TSN0_LINK,		IP0SR4_19_16)
+#define GPSR4_3		F_(TSN0_PHY_INT,	IP0SR4_15_12)
+#define GPSR4_2		F_(TSN0_AVTP_PPS1,	IP0SR4_11_8)
+#define GPSR4_1		F_(TSN0_MDC,		IP0SR4_7_4)
+#define GPSR4_0		F_(TSN0_MDIO,		IP0SR4_3_0)
 
 /* GPSR 5 */
-#define GPSR5_20	FM(AVB2_RX_CTL)
-#define GPSR5_19	FM(AVB2_TX_CTL)
-#define GPSR5_18	FM(AVB2_RXC)
-#define GPSR5_17	FM(AVB2_RD0)
-#define GPSR5_16	FM(AVB2_TXC)
-#define GPSR5_15	FM(AVB2_TD0)
-#define GPSR5_14	FM(AVB2_RD1)
-#define GPSR5_13	FM(AVB2_RD2)
-#define GPSR5_12	FM(AVB2_TD1)
-#define GPSR5_11	FM(AVB2_TD2)
-#define GPSR5_10	FM(AVB2_MDIO)
-#define GPSR5_9		FM(AVB2_RD3)
-#define GPSR5_8		FM(AVB2_TD3)
-#define GPSR5_7		FM(AVB2_TXCREFCLK)
-#define GPSR5_6		FM(AVB2_MDC)
-#define GPSR5_5		FM(AVB2_MAGIC)
-#define GPSR5_4		FM(AVB2_PHY_INT)
-#define GPSR5_3		FM(AVB2_LINK)
-#define GPSR5_2		FM(AVB2_AVTP_MATCH)
-#define GPSR5_1		FM(AVB2_AVTP_CAPTURE)
-#define GPSR5_0		FM(AVB2_AVTP_PPS)
+#define GPSR5_20	F_(AVB2_RX_CTL,		IP2SR5_19_16)
+#define GPSR5_19	F_(AVB2_TX_CTL,		IP2SR5_15_12)
+#define GPSR5_18	F_(AVB2_RXC,		IP2SR5_11_8)
+#define GPSR5_17	F_(AVB2_RD0,		IP2SR5_7_4)
+#define GPSR5_16	F_(AVB2_TXC,		IP2SR5_3_0)
+#define GPSR5_15	F_(AVB2_TD0,		IP1SR5_31_28)
+#define GPSR5_14	F_(AVB2_RD1,		IP1SR5_27_24)
+#define GPSR5_13	F_(AVB2_RD2,		IP1SR5_23_20)
+#define GPSR5_12	F_(AVB2_TD1,		IP1SR5_19_16)
+#define GPSR5_11	F_(AVB2_TD2,		IP1SR5_15_12)
+#define GPSR5_10	F_(AVB2_MDIO,		IP1SR5_11_8)
+#define GPSR5_9		F_(AVB2_RD3,		IP1SR5_7_4)
+#define GPSR5_8		F_(AVB2_TD3,		IP1SR5_3_0)
+#define GPSR5_7		F_(AVB2_TXCREFCLK,	IP0SR5_31_28)
+#define GPSR5_6		F_(AVB2_MDC,		IP0SR5_27_24)
+#define GPSR5_5		F_(AVB2_MAGIC,		IP0SR5_23_20)
+#define GPSR5_4		F_(AVB2_PHY_INT,	IP0SR5_19_16)
+#define GPSR5_3		F_(AVB2_LINK,		IP0SR5_15_12)
+#define GPSR5_2		F_(AVB2_AVTP_MATCH,	IP0SR5_11_8)
+#define GPSR5_1		F_(AVB2_AVTP_CAPTURE,	IP0SR5_7_4)
+#define GPSR5_0		F_(AVB2_AVTP_PPS,	IP0SR5_3_0)
 
 /* GPSR 6 */
 #define GPSR6_20	F_(AVB1_TXCREFCLK,	IP2SR6_19_16)
@@ -397,6 +397,68 @@
 #define IP3SR3_19_16	FM(RPC_WP_N)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 #define IP3SR3_23_20	FM(RPC_INT_N)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
+/* SR4 */
+/* IP0SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR4_3_0	FM(TSN0_MDIO)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_7_4	FM(TSN0_MDC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_11_8	FM(TSN0_AVTP_PPS1)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_15_12	FM(TSN0_PHY_INT)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_19_16	FM(TSN0_LINK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_23_20	FM(TSN0_AVTP_MATCH)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_27_24	FM(TSN0_AVTP_CAPTURE)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_31_28	FM(TSN0_RX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR4_3_0	FM(TSN0_AVTP_PPS0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_7_4	FM(TSN0_TX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_11_8	FM(TSN0_RD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_15_12	FM(TSN0_RXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_19_16	FM(TSN0_TXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_23_20	FM(TSN0_RD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_27_24	FM(TSN0_TD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_31_28	FM(TSN0_TD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR4_3_0	FM(TSN0_RD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_7_4	FM(TSN0_RD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_11_8	FM(TSN0_TD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_15_12	FM(TSN0_TD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_19_16	FM(TSN0_TXCREFCLK)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_23_20	FM(PCIE0_CLKREQ_N)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_27_24	FM(PCIE1_CLKREQ_N)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_31_28	FM(AVS0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP3SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP3SR4_3_0	FM(AVS1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* SR5 */
+/* IP0SR5 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR5_3_0	FM(AVB2_AVTP_PPS)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_7_4	FM(AVB2_AVTP_CAPTURE)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_11_8	FM(AVB2_AVTP_MATCH)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_15_12	FM(AVB2_LINK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_19_16	FM(AVB2_PHY_INT)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_23_20	FM(AVB2_MAGIC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_27_24	FM(AVB2_MDC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_31_28	FM(AVB2_TXCREFCLK)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR5 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR5_3_0	FM(AVB2_TD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_7_4	FM(AVB2_RD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_11_8	FM(AVB2_MDIO)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_15_12	FM(AVB2_TD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_19_16	FM(AVB2_TD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_23_20	FM(AVB2_RD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_27_24	FM(AVB2_RD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_31_28	FM(AVB2_TD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR5 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR5_3_0	FM(AVB2_TXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_7_4	FM(AVB2_RD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_11_8	FM(AVB2_RXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_15_12	FM(AVB2_TX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_19_16	FM(AVB2_RX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
 /* SR6 */
 /* IP0SR6 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
 #define IP0SR6_3_0	FM(AVB1_MDIO)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
@@ -542,6 +604,24 @@ FM(IP0SR3_23_20)	IP0SR3_23_20	FM(IP1SR3_23_20)	IP1SR3_23_20	FM(IP2SR3_23_20)	IP2
 FM(IP0SR3_27_24)	IP0SR3_27_24	FM(IP1SR3_27_24)	IP1SR3_27_24	FM(IP2SR3_27_24)	IP2SR3_27_24						\
 FM(IP0SR3_31_28)	IP0SR3_31_28	FM(IP1SR3_31_28)	IP1SR3_31_28	FM(IP2SR3_31_28)	IP2SR3_31_28						\
 \
+FM(IP0SR4_3_0)		IP0SR4_3_0	FM(IP1SR4_3_0)		IP1SR4_3_0	FM(IP2SR4_3_0)		IP2SR4_3_0	FM(IP3SR4_3_0)		IP3SR4_3_0	\
+FM(IP0SR4_7_4)		IP0SR4_7_4	FM(IP1SR4_7_4)		IP1SR4_7_4	FM(IP2SR4_7_4)		IP2SR4_7_4	\
+FM(IP0SR4_11_8)		IP0SR4_11_8	FM(IP1SR4_11_8)		IP1SR4_11_8	FM(IP2SR4_11_8)		IP2SR4_11_8	\
+FM(IP0SR4_15_12)	IP0SR4_15_12	FM(IP1SR4_15_12)	IP1SR4_15_12	FM(IP2SR4_15_12)	IP2SR4_15_12	\
+FM(IP0SR4_19_16)	IP0SR4_19_16	FM(IP1SR4_19_16)	IP1SR4_19_16	FM(IP2SR4_19_16)	IP2SR4_19_16	\
+FM(IP0SR4_23_20)	IP0SR4_23_20	FM(IP1SR4_23_20)	IP1SR4_23_20	FM(IP2SR4_23_20)	IP2SR4_23_20	\
+FM(IP0SR4_27_24)	IP0SR4_27_24	FM(IP1SR4_27_24)	IP1SR4_27_24	FM(IP2SR4_27_24)	IP2SR4_27_24	\
+FM(IP0SR4_31_28)	IP0SR4_31_28	FM(IP1SR4_31_28)	IP1SR4_31_28	FM(IP2SR4_31_28)	IP2SR4_31_28	\
+\
+FM(IP0SR5_3_0)		IP0SR5_3_0	FM(IP1SR5_3_0)		IP1SR5_3_0	FM(IP2SR5_3_0)		IP2SR5_3_0	\
+FM(IP0SR5_7_4)		IP0SR5_7_4	FM(IP1SR5_7_4)		IP1SR5_7_4	FM(IP2SR5_7_4)		IP2SR5_7_4	\
+FM(IP0SR5_11_8)		IP0SR5_11_8	FM(IP1SR5_11_8)		IP1SR5_11_8	FM(IP2SR5_11_8)		IP2SR5_11_8	\
+FM(IP0SR5_15_12)	IP0SR5_15_12	FM(IP1SR5_15_12)	IP1SR5_15_12	FM(IP2SR5_15_12)	IP2SR5_15_12	\
+FM(IP0SR5_19_16)	IP0SR5_19_16	FM(IP1SR5_19_16)	IP1SR5_19_16	FM(IP2SR5_19_16)	IP2SR5_19_16	\
+FM(IP0SR5_23_20)	IP0SR5_23_20	FM(IP1SR5_23_20)	IP1SR5_23_20	\
+FM(IP0SR5_27_24)	IP0SR5_27_24	FM(IP1SR5_27_24)	IP1SR5_27_24	\
+FM(IP0SR5_31_28)	IP0SR5_31_28	FM(IP1SR5_31_28)	IP1SR5_31_28	\
+\
 FM(IP0SR6_3_0)		IP0SR6_3_0	FM(IP1SR6_3_0)		IP1SR6_3_0	FM(IP2SR6_3_0)		IP2SR6_3_0	\
 FM(IP0SR6_7_4)		IP0SR6_7_4	FM(IP1SR6_7_4)		IP1SR6_7_4	FM(IP2SR6_7_4)		IP2SR6_7_4	\
 FM(IP0SR6_11_8)		IP0SR6_11_8	FM(IP1SR6_11_8)		IP1SR6_11_8	FM(IP2SR6_11_8)		IP2SR6_11_8	\
@@ -569,30 +649,6 @@ FM(IP0SR8_23_20)	IP0SR8_23_20	FM(IP1SR8_23_20)	IP1SR8_23_20	\
 FM(IP0SR8_27_24)	IP0SR8_27_24	\
 FM(IP0SR8_31_28)	IP0SR8_31_28
 
-/* MOD_SEL4 */			/* 0 */				/* 1 */
-#define MOD_SEL4_19		FM(SEL_TSN0_TD2_0)		FM(SEL_TSN0_TD2_1)
-#define MOD_SEL4_18		FM(SEL_TSN0_TD3_0)		FM(SEL_TSN0_TD3_1)
-#define MOD_SEL4_15		FM(SEL_TSN0_TD0_0)		FM(SEL_TSN0_TD0_1)
-#define MOD_SEL4_14		FM(SEL_TSN0_TD1_0)		FM(SEL_TSN0_TD1_1)
-#define MOD_SEL4_12		FM(SEL_TSN0_TXC_0)		FM(SEL_TSN0_TXC_1)
-#define MOD_SEL4_9		FM(SEL_TSN0_TX_CTL_0)		FM(SEL_TSN0_TX_CTL_1)
-#define MOD_SEL4_8		FM(SEL_TSN0_AVTP_PPS0_0)	FM(SEL_TSN0_AVTP_PPS0_1)
-#define MOD_SEL4_5		FM(SEL_TSN0_AVTP_MATCH_0)	FM(SEL_TSN0_AVTP_MATCH_1)
-#define MOD_SEL4_2		FM(SEL_TSN0_AVTP_PPS1_0)	FM(SEL_TSN0_AVTP_PPS1_1)
-#define MOD_SEL4_1		FM(SEL_TSN0_MDC_0)		FM(SEL_TSN0_MDC_1)
-
-/* MOD_SEL5 */			/* 0 */				/* 1 */
-#define MOD_SEL5_19		FM(SEL_AVB2_TX_CTL_0)		FM(SEL_AVB2_TX_CTL_1)
-#define MOD_SEL5_16		FM(SEL_AVB2_TXC_0)		FM(SEL_AVB2_TXC_1)
-#define MOD_SEL5_15		FM(SEL_AVB2_TD0_0)		FM(SEL_AVB2_TD0_1)
-#define MOD_SEL5_12		FM(SEL_AVB2_TD1_0)		FM(SEL_AVB2_TD1_1)
-#define MOD_SEL5_11		FM(SEL_AVB2_TD2_0)		FM(SEL_AVB2_TD2_1)
-#define MOD_SEL5_8		FM(SEL_AVB2_TD3_0)		FM(SEL_AVB2_TD3_1)
-#define MOD_SEL5_6		FM(SEL_AVB2_MDC_0)		FM(SEL_AVB2_MDC_1)
-#define MOD_SEL5_5		FM(SEL_AVB2_MAGIC_0)		FM(SEL_AVB2_MAGIC_1)
-#define MOD_SEL5_2		FM(SEL_AVB2_AVTP_MATCH_0)	FM(SEL_AVB2_AVTP_MATCH_1)
-#define MOD_SEL5_0		FM(SEL_AVB2_AVTP_PPS_0)		FM(SEL_AVB2_AVTP_PPS_1)
-
 /* MOD_SEL6 */			/* 0 */				/* 1 */
 #define MOD_SEL6_18		FM(SEL_AVB1_TD3_0)		FM(SEL_AVB1_TD3_1)
 #define MOD_SEL6_16		FM(SEL_AVB1_TD2_0)		FM(SEL_AVB1_TD2_1)
@@ -633,26 +689,23 @@ FM(IP0SR8_31_28)	IP0SR8_31_28
 
 #define PINMUX_MOD_SELS \
 \
-MOD_SEL4_19		MOD_SEL5_19										\
-MOD_SEL4_18					MOD_SEL6_18							\
-														\
-			MOD_SEL5_16		MOD_SEL6_16		MOD_SEL7_16				\
-MOD_SEL4_15		MOD_SEL5_15					MOD_SEL7_15				\
-MOD_SEL4_14													\
-						MOD_SEL6_13		MOD_SEL7_13				\
-MOD_SEL4_12		MOD_SEL5_12		MOD_SEL6_12							\
-			MOD_SEL5_11					MOD_SEL7_11		MOD_SEL8_11	\
-						MOD_SEL6_10		MOD_SEL7_10		MOD_SEL8_10	\
-MOD_SEL4_9											MOD_SEL8_9	\
-MOD_SEL4_8		MOD_SEL5_8								MOD_SEL8_8	\
-						MOD_SEL6_7		MOD_SEL7_7		MOD_SEL8_7	\
-			MOD_SEL5_6		MOD_SEL6_6		MOD_SEL7_6		MOD_SEL8_6	\
-MOD_SEL4_5		MOD_SEL5_5		MOD_SEL6_5					MOD_SEL8_5	\
-												MOD_SEL8_4	\
-									MOD_SEL7_3		MOD_SEL8_3	\
-MOD_SEL4_2		MOD_SEL5_2		MOD_SEL6_2		MOD_SEL7_2		MOD_SEL8_2	\
-MOD_SEL4_1					MOD_SEL6_1					MOD_SEL8_1	\
-			MOD_SEL5_0					MOD_SEL7_0		MOD_SEL8_0
+MOD_SEL6_18							\
+MOD_SEL6_16		MOD_SEL7_16				\
+			MOD_SEL7_15				\
+MOD_SEL6_13		MOD_SEL7_13				\
+MOD_SEL6_12							\
+			MOD_SEL7_11		MOD_SEL8_11	\
+MOD_SEL6_10		MOD_SEL7_10		MOD_SEL8_10	\
+						MOD_SEL8_9	\
+						MOD_SEL8_8	\
+MOD_SEL6_7		MOD_SEL7_7		MOD_SEL8_7	\
+MOD_SEL6_6		MOD_SEL7_6		MOD_SEL8_6	\
+MOD_SEL6_5					MOD_SEL8_5	\
+						MOD_SEL8_4	\
+			MOD_SEL7_3		MOD_SEL8_3	\
+MOD_SEL6_2		MOD_SEL7_2		MOD_SEL8_2	\
+MOD_SEL6_1					MOD_SEL8_1	\
+			MOD_SEL7_0		MOD_SEL8_0
 
 enum {
 	PINMUX_RESERVED = 0,
@@ -686,59 +739,6 @@ enum {
 static const u16 pinmux_data[] = {
 	PINMUX_DATA_GP_ALL(),
 
-	PINMUX_SINGLE(AVS1),
-	PINMUX_SINGLE(AVS0),
-	PINMUX_SINGLE(PCIE1_CLKREQ_N),
-	PINMUX_SINGLE(PCIE0_CLKREQ_N),
-
-	/* TSN0 without MODSEL4 */
-	PINMUX_SINGLE(TSN0_TXCREFCLK),
-	PINMUX_SINGLE(TSN0_RD2),
-	PINMUX_SINGLE(TSN0_RD3),
-	PINMUX_SINGLE(TSN0_RD1),
-	PINMUX_SINGLE(TSN0_RXC),
-	PINMUX_SINGLE(TSN0_RD0),
-	PINMUX_SINGLE(TSN0_RX_CTL),
-	PINMUX_SINGLE(TSN0_AVTP_CAPTURE),
-	PINMUX_SINGLE(TSN0_LINK),
-	PINMUX_SINGLE(TSN0_PHY_INT),
-	PINMUX_SINGLE(TSN0_MDIO),
-	/* TSN0 with MODSEL4 */
-	PINMUX_IPSR_NOGM(0, TSN0_TD2,		SEL_TSN0_TD2_1),
-	PINMUX_IPSR_NOGM(0, TSN0_TD3,		SEL_TSN0_TD3_1),
-	PINMUX_IPSR_NOGM(0, TSN0_TD0,		SEL_TSN0_TD0_1),
-	PINMUX_IPSR_NOGM(0, TSN0_TD1,		SEL_TSN0_TD1_1),
-	PINMUX_IPSR_NOGM(0, TSN0_TXC,		SEL_TSN0_TXC_1),
-	PINMUX_IPSR_NOGM(0, TSN0_TX_CTL,	SEL_TSN0_TX_CTL_1),
-	PINMUX_IPSR_NOGM(0, TSN0_AVTP_PPS0,	SEL_TSN0_AVTP_PPS0_1),
-	PINMUX_IPSR_NOGM(0, TSN0_AVTP_MATCH,	SEL_TSN0_AVTP_MATCH_1),
-	PINMUX_IPSR_NOGM(0, TSN0_AVTP_PPS1,	SEL_TSN0_AVTP_PPS1_1),
-	PINMUX_IPSR_NOGM(0, TSN0_MDC,		SEL_TSN0_MDC_1),
-
-	/* TSN0 without MODSEL5 */
-	PINMUX_SINGLE(AVB2_RX_CTL),
-	PINMUX_SINGLE(AVB2_RXC),
-	PINMUX_SINGLE(AVB2_RD0),
-	PINMUX_SINGLE(AVB2_RD1),
-	PINMUX_SINGLE(AVB2_RD2),
-	PINMUX_SINGLE(AVB2_MDIO),
-	PINMUX_SINGLE(AVB2_RD3),
-	PINMUX_SINGLE(AVB2_TXCREFCLK),
-	PINMUX_SINGLE(AVB2_PHY_INT),
-	PINMUX_SINGLE(AVB2_LINK),
-	PINMUX_SINGLE(AVB2_AVTP_CAPTURE),
-	/* TSN0 with MODSEL5 */
-	PINMUX_IPSR_NOGM(0, AVB2_TX_CTL,	SEL_AVB2_TX_CTL_1),
-	PINMUX_IPSR_NOGM(0, AVB2_TXC,		SEL_AVB2_TXC_1),
-	PINMUX_IPSR_NOGM(0, AVB2_TD0,		SEL_AVB2_TD0_1),
-	PINMUX_IPSR_NOGM(0, AVB2_TD1,		SEL_AVB2_TD1_1),
-	PINMUX_IPSR_NOGM(0, AVB2_TD2,		SEL_AVB2_TD2_1),
-	PINMUX_IPSR_NOGM(0, AVB2_TD3,		SEL_AVB2_TD3_1),
-	PINMUX_IPSR_NOGM(0, AVB2_MDC,		SEL_AVB2_MDC_1),
-	PINMUX_IPSR_NOGM(0, AVB2_MAGIC,		SEL_AVB2_MAGIC_1),
-	PINMUX_IPSR_NOGM(0, AVB2_AVTP_MATCH,	SEL_AVB2_AVTP_MATCH_1),
-	PINMUX_IPSR_NOGM(0, AVB2_AVTP_PPS,	SEL_AVB2_AVTP_PPS_1),
-
 	/* IP0SR0 */
 	PINMUX_IPSR_GPSR(IP0SR0_3_0,	ERROROUTC_B),
 	PINMUX_IPSR_GPSR(IP0SR0_3_0,	TCLK2_A),
@@ -1029,6 +1029,66 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_GPSR(IP3SR3_19_16,	RPC_WP_N),
 	PINMUX_IPSR_GPSR(IP3SR3_23_20,	RPC_INT_N),
 
+	/* IP0SR4 */
+	PINMUX_IPSR_GPSR(IP0SR4_3_0,	TSN0_MDIO),
+	PINMUX_IPSR_GPSR(IP0SR4_7_4,	TSN0_MDC),
+	PINMUX_IPSR_GPSR(IP0SR4_11_8,	TSN0_AVTP_PPS1),
+	PINMUX_IPSR_GPSR(IP0SR4_15_12,	TSN0_PHY_INT),
+	PINMUX_IPSR_GPSR(IP0SR4_19_16,	TSN0_LINK),
+	PINMUX_IPSR_GPSR(IP0SR4_23_20,	TSN0_AVTP_MATCH),
+	PINMUX_IPSR_GPSR(IP0SR4_27_24,	TSN0_AVTP_CAPTURE),
+	PINMUX_IPSR_GPSR(IP0SR4_31_28,	TSN0_RX_CTL),
+
+	/* IP1SR4 */
+	PINMUX_IPSR_GPSR(IP1SR4_3_0,	TSN0_AVTP_PPS0),
+	PINMUX_IPSR_GPSR(IP1SR4_7_4,	TSN0_TX_CTL),
+	PINMUX_IPSR_GPSR(IP1SR4_11_8,	TSN0_RD0),
+	PINMUX_IPSR_GPSR(IP1SR4_15_12,	TSN0_RXC),
+	PINMUX_IPSR_GPSR(IP1SR4_19_16,	TSN0_TXC),
+	PINMUX_IPSR_GPSR(IP1SR4_23_20,	TSN0_RD1),
+	PINMUX_IPSR_GPSR(IP1SR4_27_24,	TSN0_TD1),
+	PINMUX_IPSR_GPSR(IP1SR4_31_28,	TSN0_TD0),
+
+	/* IP2SR4 */
+	PINMUX_IPSR_GPSR(IP2SR4_3_0,	TSN0_RD3),
+	PINMUX_IPSR_GPSR(IP2SR4_7_4,	TSN0_RD2),
+	PINMUX_IPSR_GPSR(IP2SR4_11_8,	TSN0_TD3),
+	PINMUX_IPSR_GPSR(IP2SR4_15_12,	TSN0_TD2),
+	PINMUX_IPSR_GPSR(IP2SR4_19_16,	TSN0_TXCREFCLK),
+	PINMUX_IPSR_GPSR(IP2SR4_23_20,	PCIE0_CLKREQ_N),
+	PINMUX_IPSR_GPSR(IP2SR4_27_24,	PCIE1_CLKREQ_N),
+	PINMUX_IPSR_GPSR(IP2SR4_31_28,	AVS0),
+
+	/* IP3SR4 */
+	PINMUX_IPSR_GPSR(IP3SR4_3_0,	AVS1),
+
+	/* IP0SR5 */
+	PINMUX_IPSR_GPSR(IP0SR5_3_0,	AVB2_AVTP_PPS),
+	PINMUX_IPSR_GPSR(IP0SR5_7_4,	AVB2_AVTP_CAPTURE),
+	PINMUX_IPSR_GPSR(IP0SR5_11_8,	AVB2_AVTP_MATCH),
+	PINMUX_IPSR_GPSR(IP0SR5_15_12,	AVB2_LINK),
+	PINMUX_IPSR_GPSR(IP0SR5_19_16,	AVB2_PHY_INT),
+	PINMUX_IPSR_GPSR(IP0SR5_23_20,	AVB2_MAGIC),
+	PINMUX_IPSR_GPSR(IP0SR5_27_24,	AVB2_MDC),
+	PINMUX_IPSR_GPSR(IP0SR5_31_28,	AVB2_TXCREFCLK),
+
+	/* IP1SR5 */
+	PINMUX_IPSR_GPSR(IP1SR5_3_0,	AVB2_TD3),
+	PINMUX_IPSR_GPSR(IP1SR5_7_4,	AVB2_RD3),
+	PINMUX_IPSR_GPSR(IP1SR5_11_8,	AVB2_MDIO),
+	PINMUX_IPSR_GPSR(IP1SR5_15_12,	AVB2_TD2),
+	PINMUX_IPSR_GPSR(IP1SR5_19_16,	AVB2_TD1),
+	PINMUX_IPSR_GPSR(IP1SR5_23_20,	AVB2_RD2),
+	PINMUX_IPSR_GPSR(IP1SR5_27_24,	AVB2_RD1),
+	PINMUX_IPSR_GPSR(IP1SR5_31_28,	AVB2_TD0),
+
+	/* IP2SR5 */
+	PINMUX_IPSR_GPSR(IP2SR5_3_0,	AVB2_TXC),
+	PINMUX_IPSR_GPSR(IP2SR5_7_4,	AVB2_RD0),
+	PINMUX_IPSR_GPSR(IP2SR5_11_8,	AVB2_RXC),
+	PINMUX_IPSR_GPSR(IP2SR5_15_12,	AVB2_TX_CTL),
+	PINMUX_IPSR_GPSR(IP2SR5_19_16,	AVB2_RX_CTL),
+
 	/* IP0SR6 */
 	PINMUX_IPSR_GPSR(IP0SR6_3_0,	AVB1_MDIO),
 
@@ -3419,6 +3479,82 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		IP3SR3_7_4
 		IP3SR3_3_0))
 	},
+	{ PINMUX_CFG_REG_VAR("IP0SR4", 0xE6060060, 32,
+			     GROUP(4, 4, 4, 4, 4, 4, 4, 4),
+			     GROUP(
+		IP0SR4_31_28
+		IP0SR4_27_24
+		IP0SR4_23_20
+		IP0SR4_19_16
+		IP0SR4_15_12
+		IP0SR4_11_8
+		IP0SR4_7_4
+		IP0SR4_3_0))
+	},
+	{ PINMUX_CFG_REG_VAR("IP1SR4", 0xE6060064, 32,
+			     GROUP(4, 4, 4, 4, 4, 4, 4, 4),
+			     GROUP(
+		IP1SR4_31_28
+		IP1SR4_27_24
+		IP1SR4_23_20
+		IP1SR4_19_16
+		IP1SR4_15_12
+		IP1SR4_11_8
+		IP1SR4_7_4
+		IP1SR4_3_0))
+	},
+	{ PINMUX_CFG_REG_VAR("IP2SR4", 0xE6060068, 32,
+			     GROUP(4, 4, 4, 4, 4, 4, 4, 4),
+			     GROUP(
+		IP2SR4_31_28
+		IP2SR4_27_24
+		IP2SR4_23_20
+		IP2SR4_19_16
+		IP2SR4_15_12
+		IP2SR4_11_8
+		IP2SR4_7_4
+		IP2SR4_3_0))
+	},
+	{ PINMUX_CFG_REG_VAR("IP3SR4", 0xE606006C, 32,
+			     GROUP(-28, 4),
+			     GROUP(
+		/* IP3SR4_31_4 RESERVED */
+		IP3SR4_3_0))
+	},
+	{ PINMUX_CFG_REG_VAR("IP0SR5", 0xE6060860, 32,
+			     GROUP(4, 4, 4, 4, 4, 4, 4, 4),
+			     GROUP(
+		IP0SR5_31_28
+		IP0SR5_27_24
+		IP0SR5_23_20
+		IP0SR5_19_16
+		IP0SR5_15_12
+		IP0SR5_11_8
+		IP0SR5_7_4
+		IP0SR5_3_0))
+	},
+	{ PINMUX_CFG_REG_VAR("IP1SR5", 0xE6060864, 32,
+			     GROUP(4, 4, 4, 4, 4, 4, 4, 4),
+			     GROUP(
+		IP1SR5_31_28
+		IP1SR5_27_24
+		IP1SR5_23_20
+		IP1SR5_19_16
+		IP1SR5_15_12
+		IP1SR5_11_8
+		IP1SR5_7_4
+		IP1SR5_3_0))
+	},
+	{ PINMUX_CFG_REG_VAR("IP2SR5", 0xE6060868, 32,
+			     GROUP(-12, 4, 4, 4, 4, 4),
+			     GROUP(
+		/* IP2SR5_31_20 RESERVED */
+		IP2SR5_19_16
+		IP2SR5_15_12
+		IP2SR5_11_8
+		IP2SR5_7_4
+		IP2SR5_3_0))
+	},
 	{ PINMUX_CFG_REG("IP0SR6", 0xE6061060, 32, 4, GROUP(
 		IP0SR6_31_28
 		IP0SR6_27_24
@@ -3505,51 +3641,6 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 
 #define F_(x, y)	x,
 #define FM(x)		FN_##x,
-	{ PINMUX_CFG_REG_VAR("MOD_SEL4", 0xE6060100, 32,
-			     GROUP(-12, 1, 1, -2, 1, 1, -1, 1, -2, 1, 1, -2, 1,
-				   -2, 1, 1, -1),
-			     GROUP(
-		/* RESERVED 31-20 */
-		MOD_SEL4_19
-		MOD_SEL4_18
-		/* RESERVED 17-16 */
-		MOD_SEL4_15
-		MOD_SEL4_14
-		/* RESERVED 13 */
-		MOD_SEL4_12
-		/* RESERVED 11-10 */
-		MOD_SEL4_9
-		MOD_SEL4_8
-		/* RESERVED 7-6 */
-		MOD_SEL4_5
-		/* RESERVED 4-3 */
-		MOD_SEL4_2
-		MOD_SEL4_1
-		/* RESERVED 0 */
-		))
-	},
-	{ PINMUX_CFG_REG_VAR("MOD_SEL5", 0xE6060900, 32,
-			     GROUP(-12, 1, -2, 1, 1, -2, 1, 1, -2, 1, -1,
-				   1, 1, -2, 1, -1, 1),
-			     GROUP(
-		/* RESERVED 31-20 */
-		MOD_SEL5_19
-		/* RESERVED 18-17 */
-		MOD_SEL5_16
-		MOD_SEL5_15
-		/* RESERVED 14-13 */
-		MOD_SEL5_12
-		MOD_SEL5_11
-		/* RESERVED 10-9 */
-		MOD_SEL5_8
-		/* RESERVED 7 */
-		MOD_SEL5_6
-		MOD_SEL5_5
-		/* RESERVED 4-3 */
-		MOD_SEL5_2
-		/* RESERVED 1 */
-		MOD_SEL5_0))
-	},
 	{ PINMUX_CFG_REG_VAR("MOD_SEL6", 0xE6061100, 32,
 			     GROUP(-13, 1, -1, 1, -2, 1, 1,
 				   -1, 1, -2, 1, 1, 1, -2, 1, 1, -1),
Signature · 1 line
2.39.2
author maintainer
#640 lore raw

PATCH 638/694 pinctrl: renesas: r8a779g0: Fix Group 6/7 pin functions

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 203734a0419cade9c76016f66e2c7ba354c249b4 ]

According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, pin groups 6 and 7 do not use Module Select Registers to configure pin functions.

Hence:
- Remove the non-existent Module Select Registers (MODSEL[67]),
- Correct the affected PINMUX definitions.

Fixes 36611d28f5130d8b ("pinctrl: renesas: r8a779g0: Add missing MODSELx for AVBx")
Fixes ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
---
 drivers/pinctrl/renesas/pfc-r8a779g0.c | 171 +++++++------------------
 1 file changed, 49 insertions(+), 122 deletions(-)
drivers/pinctrl/renesas/pfc-r8a779g0.c +49 -122
index bc1352d36d49f..104482a847e94 100644
@@ -649,30 +649,6 @@ FM(IP0SR8_23_20)	IP0SR8_23_20	FM(IP1SR8_23_20)	IP1SR8_23_20	\
 FM(IP0SR8_27_24)	IP0SR8_27_24	\
 FM(IP0SR8_31_28)	IP0SR8_31_28
 
-/* MOD_SEL6 */			/* 0 */				/* 1 */
-#define MOD_SEL6_18		FM(SEL_AVB1_TD3_0)		FM(SEL_AVB1_TD3_1)
-#define MOD_SEL6_16		FM(SEL_AVB1_TD2_0)		FM(SEL_AVB1_TD2_1)
-#define MOD_SEL6_13		FM(SEL_AVB1_TD0_0)		FM(SEL_AVB1_TD0_1)
-#define MOD_SEL6_12		FM(SEL_AVB1_TD1_0)		FM(SEL_AVB1_TD1_1)
-#define MOD_SEL6_10		FM(SEL_AVB1_AVTP_PPS_0)		FM(SEL_AVB1_AVTP_PPS_1)
-#define MOD_SEL6_7		FM(SEL_AVB1_TX_CTL_0)		FM(SEL_AVB1_TX_CTL_1)
-#define MOD_SEL6_6		FM(SEL_AVB1_TXC_0)		FM(SEL_AVB1_TXC_1)
-#define MOD_SEL6_5		FM(SEL_AVB1_AVTP_MATCH_0)	FM(SEL_AVB1_AVTP_MATCH_1)
-#define MOD_SEL6_2		FM(SEL_AVB1_MDC_0)		FM(SEL_AVB1_MDC_1)
-#define MOD_SEL6_1		FM(SEL_AVB1_MAGIC_0)		FM(SEL_AVB1_MAGIC_1)
-
-/* MOD_SEL7 */			/* 0 */				/* 1 */
-#define MOD_SEL7_16		FM(SEL_AVB0_TX_CTL_0)		FM(SEL_AVB0_TX_CTL_1)
-#define MOD_SEL7_15		FM(SEL_AVB0_TXC_0)		FM(SEL_AVB0_TXC_1)
-#define MOD_SEL7_13		FM(SEL_AVB0_MDC_0)		FM(SEL_AVB0_MDC_1)
-#define MOD_SEL7_11		FM(SEL_AVB0_TD0_0)		FM(SEL_AVB0_TD0_1)
-#define MOD_SEL7_10		FM(SEL_AVB0_MAGIC_0)		FM(SEL_AVB0_MAGIC_1)
-#define MOD_SEL7_7		FM(SEL_AVB0_TD1_0)		FM(SEL_AVB0_TD1_1)
-#define MOD_SEL7_6		FM(SEL_AVB0_TD2_0)		FM(SEL_AVB0_TD2_1)
-#define MOD_SEL7_3		FM(SEL_AVB0_TD3_0)		FM(SEL_AVB0_TD3_1)
-#define MOD_SEL7_2		FM(SEL_AVB0_AVTP_MATCH_0)	FM(SEL_AVB0_AVTP_MATCH_1)
-#define MOD_SEL7_0		FM(SEL_AVB0_AVTP_PPS_0)		FM(SEL_AVB0_AVTP_PPS_1)
-
 /* MOD_SEL8 */			/* 0 */				/* 1 */
 #define MOD_SEL8_11		FM(SEL_SDA5_0)			FM(SEL_SDA5_1)
 #define MOD_SEL8_10		FM(SEL_SCL5_0)			FM(SEL_SCL5_1)
@@ -689,23 +665,18 @@ FM(IP0SR8_31_28)	IP0SR8_31_28
 
 #define PINMUX_MOD_SELS \
 \
-MOD_SEL6_18							\
-MOD_SEL6_16		MOD_SEL7_16				\
-			MOD_SEL7_15				\
-MOD_SEL6_13		MOD_SEL7_13				\
-MOD_SEL6_12							\
-			MOD_SEL7_11		MOD_SEL8_11	\
-MOD_SEL6_10		MOD_SEL7_10		MOD_SEL8_10	\
-						MOD_SEL8_9	\
-						MOD_SEL8_8	\
-MOD_SEL6_7		MOD_SEL7_7		MOD_SEL8_7	\
-MOD_SEL6_6		MOD_SEL7_6		MOD_SEL8_6	\
-MOD_SEL6_5					MOD_SEL8_5	\
-						MOD_SEL8_4	\
-			MOD_SEL7_3		MOD_SEL8_3	\
-MOD_SEL6_2		MOD_SEL7_2		MOD_SEL8_2	\
-MOD_SEL6_1					MOD_SEL8_1	\
-			MOD_SEL7_0		MOD_SEL8_0
+MOD_SEL8_11	\
+MOD_SEL8_10	\
+MOD_SEL8_9	\
+MOD_SEL8_8	\
+MOD_SEL8_7	\
+MOD_SEL8_6	\
+MOD_SEL8_5	\
+MOD_SEL8_4	\
+MOD_SEL8_3	\
+MOD_SEL8_2	\
+MOD_SEL8_1	\
+MOD_SEL8_0
 
 enum {
 	PINMUX_RESERVED = 0,
@@ -1092,23 +1063,23 @@ static const u16 pinmux_data[] = {
 	/* IP0SR6 */
 	PINMUX_IPSR_GPSR(IP0SR6_3_0,	AVB1_MDIO),
 
-	PINMUX_IPSR_MSEL(IP0SR6_7_4,	AVB1_MAGIC,		SEL_AVB1_MAGIC_1),
+	PINMUX_IPSR_GPSR(IP0SR6_7_4,	AVB1_MAGIC),
 
-	PINMUX_IPSR_MSEL(IP0SR6_11_8,	AVB1_MDC,		SEL_AVB1_MDC_1),
+	PINMUX_IPSR_GPSR(IP0SR6_11_8,	AVB1_MDC),
 
 	PINMUX_IPSR_GPSR(IP0SR6_15_12,	AVB1_PHY_INT),
 
 	PINMUX_IPSR_GPSR(IP0SR6_19_16,	AVB1_LINK),
 	PINMUX_IPSR_GPSR(IP0SR6_19_16,	AVB1_MII_TX_ER),
 
-	PINMUX_IPSR_MSEL(IP0SR6_23_20,	AVB1_AVTP_MATCH,	SEL_AVB1_AVTP_MATCH_1),
-	PINMUX_IPSR_MSEL(IP0SR6_23_20,	AVB1_MII_RX_ER,		SEL_AVB1_AVTP_MATCH_0),
+	PINMUX_IPSR_GPSR(IP0SR6_23_20,	AVB1_AVTP_MATCH),
+	PINMUX_IPSR_GPSR(IP0SR6_23_20,	AVB1_MII_RX_ER),
 
-	PINMUX_IPSR_MSEL(IP0SR6_27_24,	AVB1_TXC,		SEL_AVB1_TXC_1),
-	PINMUX_IPSR_MSEL(IP0SR6_27_24,	AVB1_MII_TXC,		SEL_AVB1_TXC_0),
+	PINMUX_IPSR_GPSR(IP0SR6_27_24,	AVB1_TXC),
+	PINMUX_IPSR_GPSR(IP0SR6_27_24,	AVB1_MII_TXC),
 
-	PINMUX_IPSR_MSEL(IP0SR6_31_28,	AVB1_TX_CTL,		SEL_AVB1_TX_CTL_1),
-	PINMUX_IPSR_MSEL(IP0SR6_31_28,	AVB1_MII_TX_EN,		SEL_AVB1_TX_CTL_0),
+	PINMUX_IPSR_GPSR(IP0SR6_31_28,	AVB1_TX_CTL),
+	PINMUX_IPSR_GPSR(IP0SR6_31_28,	AVB1_MII_TX_EN),
 
 	/* IP1SR6 */
 	PINMUX_IPSR_GPSR(IP1SR6_3_0,	AVB1_RXC),
@@ -1117,17 +1088,17 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_GPSR(IP1SR6_7_4,	AVB1_RX_CTL),
 	PINMUX_IPSR_GPSR(IP1SR6_7_4,	AVB1_MII_RX_DV),
 
-	PINMUX_IPSR_MSEL(IP1SR6_11_8,	AVB1_AVTP_PPS,		SEL_AVB1_AVTP_PPS_1),
-	PINMUX_IPSR_MSEL(IP1SR6_11_8,	AVB1_MII_COL,		SEL_AVB1_AVTP_PPS_0),
+	PINMUX_IPSR_GPSR(IP1SR6_11_8,	AVB1_AVTP_PPS),
+	PINMUX_IPSR_GPSR(IP1SR6_11_8,	AVB1_MII_COL),
 
 	PINMUX_IPSR_GPSR(IP1SR6_15_12,	AVB1_AVTP_CAPTURE),
 	PINMUX_IPSR_GPSR(IP1SR6_15_12,	AVB1_MII_CRS),
 
-	PINMUX_IPSR_MSEL(IP1SR6_19_16,	AVB1_TD1,		SEL_AVB1_TD1_1),
-	PINMUX_IPSR_MSEL(IP1SR6_19_16,	AVB1_MII_TD1,		SEL_AVB1_TD1_0),
+	PINMUX_IPSR_GPSR(IP1SR6_19_16,	AVB1_TD1),
+	PINMUX_IPSR_GPSR(IP1SR6_19_16,	AVB1_MII_TD1),
 
-	PINMUX_IPSR_MSEL(IP1SR6_23_20,	AVB1_TD0,		SEL_AVB1_TD0_1),
-	PINMUX_IPSR_MSEL(IP1SR6_23_20,	AVB1_MII_TD0,		SEL_AVB1_TD0_0),
+	PINMUX_IPSR_GPSR(IP1SR6_23_20,	AVB1_TD0),
+	PINMUX_IPSR_GPSR(IP1SR6_23_20,	AVB1_MII_TD0),
 
 	PINMUX_IPSR_GPSR(IP1SR6_27_24,	AVB1_RD1),
 	PINMUX_IPSR_GPSR(IP1SR6_27_24,	AVB1_MII_RD1),
@@ -1136,14 +1107,14 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_GPSR(IP1SR6_31_28,	AVB1_MII_RD0),
 
 	/* IP2SR6 */
-	PINMUX_IPSR_MSEL(IP2SR6_3_0,	AVB1_TD2,		SEL_AVB1_TD2_1),
-	PINMUX_IPSR_MSEL(IP2SR6_3_0,	AVB1_MII_TD2,		SEL_AVB1_TD2_0),
+	PINMUX_IPSR_GPSR(IP2SR6_3_0,	AVB1_TD2),
+	PINMUX_IPSR_GPSR(IP2SR6_3_0,	AVB1_MII_TD2),
 
 	PINMUX_IPSR_GPSR(IP2SR6_7_4,	AVB1_RD2),
 	PINMUX_IPSR_GPSR(IP2SR6_7_4,	AVB1_MII_RD2),
 
-	PINMUX_IPSR_MSEL(IP2SR6_11_8,	AVB1_TD3,		SEL_AVB1_TD3_1),
-	PINMUX_IPSR_MSEL(IP2SR6_11_8,	AVB1_MII_TD3,		SEL_AVB1_TD3_0),
+	PINMUX_IPSR_GPSR(IP2SR6_11_8,	AVB1_TD3),
+	PINMUX_IPSR_GPSR(IP2SR6_11_8,	AVB1_MII_TD3),
 
 	PINMUX_IPSR_GPSR(IP2SR6_15_12,	AVB1_RD3),
 	PINMUX_IPSR_GPSR(IP2SR6_15_12,	AVB1_MII_RD3),
@@ -1151,29 +1122,29 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_GPSR(IP2SR6_19_16,	AVB1_TXCREFCLK),
 
 	/* IP0SR7 */
-	PINMUX_IPSR_MSEL(IP0SR7_3_0,	AVB0_AVTP_PPS,		SEL_AVB0_AVTP_PPS_1),
-	PINMUX_IPSR_MSEL(IP0SR7_3_0,	AVB0_MII_COL,		SEL_AVB0_AVTP_PPS_0),
+	PINMUX_IPSR_GPSR(IP0SR7_3_0,	AVB0_AVTP_PPS),
+	PINMUX_IPSR_GPSR(IP0SR7_3_0,	AVB0_MII_COL),
 
 	PINMUX_IPSR_GPSR(IP0SR7_7_4,	AVB0_AVTP_CAPTURE),
 	PINMUX_IPSR_GPSR(IP0SR7_7_4,	AVB0_MII_CRS),
 
-	PINMUX_IPSR_MSEL(IP0SR7_11_8,	AVB0_AVTP_MATCH,	SEL_AVB0_AVTP_MATCH_1),
-	PINMUX_IPSR_MSEL(IP0SR7_11_8,	AVB0_MII_RX_ER,		SEL_AVB0_AVTP_MATCH_0),
-	PINMUX_IPSR_MSEL(IP0SR7_11_8,	CC5_OSCOUT,		SEL_AVB0_AVTP_MATCH_0),
+	PINMUX_IPSR_GPSR(IP0SR7_11_8,	AVB0_AVTP_MATCH),
+	PINMUX_IPSR_GPSR(IP0SR7_11_8,	AVB0_MII_RX_ER),
+	PINMUX_IPSR_GPSR(IP0SR7_11_8,	CC5_OSCOUT),
 
-	PINMUX_IPSR_MSEL(IP0SR7_15_12,	AVB0_TD3,		SEL_AVB0_TD3_1),
-	PINMUX_IPSR_MSEL(IP0SR7_15_12,	AVB0_MII_TD3,		SEL_AVB0_TD3_0),
+	PINMUX_IPSR_GPSR(IP0SR7_15_12,	AVB0_TD3),
+	PINMUX_IPSR_GPSR(IP0SR7_15_12,	AVB0_MII_TD3),
 
 	PINMUX_IPSR_GPSR(IP0SR7_19_16,	AVB0_LINK),
 	PINMUX_IPSR_GPSR(IP0SR7_19_16,	AVB0_MII_TX_ER),
 
 	PINMUX_IPSR_GPSR(IP0SR7_23_20,	AVB0_PHY_INT),
 
-	PINMUX_IPSR_MSEL(IP0SR7_27_24,	AVB0_TD2,		SEL_AVB0_TD2_1),
-	PINMUX_IPSR_MSEL(IP0SR7_27_24,	AVB0_MII_TD2,		SEL_AVB0_TD2_0),
+	PINMUX_IPSR_GPSR(IP0SR7_27_24,	AVB0_TD2),
+	PINMUX_IPSR_GPSR(IP0SR7_27_24,	AVB0_MII_TD2),
 
-	PINMUX_IPSR_MSEL(IP0SR7_31_28,	AVB0_TD1,		SEL_AVB0_TD1_1),
-	PINMUX_IPSR_MSEL(IP0SR7_31_28,	AVB0_MII_TD1,		SEL_AVB0_TD1_0),
+	PINMUX_IPSR_GPSR(IP0SR7_31_28,	AVB0_TD1),
+	PINMUX_IPSR_GPSR(IP0SR7_31_28,	AVB0_MII_TD1),
 
 	/* IP1SR7 */
 	PINMUX_IPSR_GPSR(IP1SR7_3_0,	AVB0_RD3),
@@ -1181,24 +1152,24 @@ static const u16 pinmux_data[] = {
 
 	PINMUX_IPSR_GPSR(IP1SR7_7_4,	AVB0_TXCREFCLK),
 
-	PINMUX_IPSR_MSEL(IP1SR7_11_8,	AVB0_MAGIC,		SEL_AVB0_MAGIC_1),
+	PINMUX_IPSR_GPSR(IP1SR7_11_8,	AVB0_MAGIC),
 
-	PINMUX_IPSR_MSEL(IP1SR7_15_12,	AVB0_TD0,		SEL_AVB0_TD0_1),
-	PINMUX_IPSR_MSEL(IP1SR7_15_12,	AVB0_MII_TD0,		SEL_AVB0_TD0_0),
+	PINMUX_IPSR_GPSR(IP1SR7_15_12,	AVB0_TD0),
+	PINMUX_IPSR_GPSR(IP1SR7_15_12,	AVB0_MII_TD0),
 
 	PINMUX_IPSR_GPSR(IP1SR7_19_16,	AVB0_RD2),
 	PINMUX_IPSR_GPSR(IP1SR7_19_16,	AVB0_MII_RD2),
 
-	PINMUX_IPSR_MSEL(IP1SR7_23_20,	AVB0_MDC,		SEL_AVB0_MDC_1),
+	PINMUX_IPSR_GPSR(IP1SR7_23_20,	AVB0_MDC),
 
 	PINMUX_IPSR_GPSR(IP1SR7_27_24,	AVB0_MDIO),
 
-	PINMUX_IPSR_MSEL(IP1SR7_31_28,	AVB0_TXC,		SEL_AVB0_TXC_1),
-	PINMUX_IPSR_MSEL(IP1SR7_31_28,	AVB0_MII_TXC,		SEL_AVB0_TXC_0),
+	PINMUX_IPSR_GPSR(IP1SR7_31_28,	AVB0_TXC),
+	PINMUX_IPSR_GPSR(IP1SR7_31_28,	AVB0_MII_TXC),
 
 	/* IP2SR7 */
-	PINMUX_IPSR_MSEL(IP2SR7_3_0,	AVB0_TX_CTL,		SEL_AVB0_TX_CTL_1),
-	PINMUX_IPSR_MSEL(IP2SR7_3_0,	AVB0_MII_TX_EN,		SEL_AVB0_TX_CTL_0),
+	PINMUX_IPSR_GPSR(IP2SR7_3_0,	AVB0_TX_CTL),
+	PINMUX_IPSR_GPSR(IP2SR7_3_0,	AVB0_MII_TX_EN),
 
 	PINMUX_IPSR_GPSR(IP2SR7_7_4,	AVB0_RD1),
 	PINMUX_IPSR_GPSR(IP2SR7_7_4,	AVB0_MII_RD1),
@@ -3641,50 +3612,6 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 
 #define F_(x, y)	x,
 #define FM(x)		FN_##x,
-	{ PINMUX_CFG_REG_VAR("MOD_SEL6", 0xE6061100, 32,
-			     GROUP(-13, 1, -1, 1, -2, 1, 1,
-				   -1, 1, -2, 1, 1, 1, -2, 1, 1, -1),
-			     GROUP(
-		/* RESERVED 31-19 */
-		MOD_SEL6_18
-		/* RESERVED 17 */
-		MOD_SEL6_16
-		/* RESERVED 15-14 */
-		MOD_SEL6_13
-		MOD_SEL6_12
-		/* RESERVED 11 */
-		MOD_SEL6_10
-		/* RESERVED 9-8 */
-		MOD_SEL6_7
-		MOD_SEL6_6
-		MOD_SEL6_5
-		/* RESERVED 4-3 */
-		MOD_SEL6_2
-		MOD_SEL6_1
-		/* RESERVED 0 */
-		))
-	},
-	{ PINMUX_CFG_REG_VAR("MOD_SEL7", 0xE6061900, 32,
-			     GROUP(-15, 1, 1, -1, 1, -1, 1, 1, -2, 1, 1,
-				   -2, 1, 1, -1, 1),
-			     GROUP(
-		/* RESERVED 31-17 */
-		MOD_SEL7_16
-		MOD_SEL7_15
-		/* RESERVED 14 */
-		MOD_SEL7_13
-		/* RESERVED 12 */
-		MOD_SEL7_11
-		MOD_SEL7_10
-		/* RESERVED 9-8 */
-		MOD_SEL7_7
-		MOD_SEL7_6
-		/* RESERVED 5-4 */
-		MOD_SEL7_3
-		MOD_SEL7_2
-		/* RESERVED 1 */
-		MOD_SEL7_0))
-	},
 	{ PINMUX_CFG_REG_VAR("MOD_SEL8", 0xE6068100, 32,
 			     GROUP(-20, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1),
 			     GROUP(
Signature · 1 line
2.39.2
author maintainer
#641 lore raw

PATCH 639/694 pinctrl: renesas: r8a779g0: Fix ERROROUTC function names

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 9da805344d2a2d27a32cc9271230055d8818e887 ]

According to R-Car V4H Series User’s Manual: Hardware Rev. 0.54, the ERROROUTC signal is active-low. Hence add the missing "_N" suffix to the pin function's names.

Resize column 2 of all IPxSR* definitions to accomodate the longer names.

Fixes b811062e5fd0343c ("pinctrl: renesas: r8a779g0: Add missing ERROROUTC_A")
Fixes ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
---
 drivers/pinctrl/renesas/pfc-r8a779g0.c | 502 ++++++++++++-------------
 1 file changed, 251 insertions(+), 251 deletions(-)
drivers/pinctrl/renesas/pfc-r8a779g0.c +251 -251
index 104482a847e94..a47b02bf46863 100644
@@ -268,271 +268,271 @@
 #define GPSR8_0		F_(SCL0,		IP0SR8_3_0)
 
 /* SR0 */
-/* IP0SR0 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR0_3_0	F_(0, 0)		FM(ERROROUTC_B)		FM(TCLK2_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR0_7_4	F_(0, 0)		FM(MSIOF3_SS1)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR0_11_8	F_(0, 0)		FM(MSIOF3_SS2)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR0_15_12	FM(IRQ3)		FM(MSIOF3_SCK)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR0_19_16	FM(IRQ2)		FM(MSIOF3_TXD)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR0_23_20	FM(IRQ1)		FM(MSIOF3_RXD)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR0_27_24	FM(IRQ0)		FM(MSIOF3_SYNC)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR0_31_28	FM(MSIOF5_SS2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR0 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR0_3_0	FM(MSIOF5_SS1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR0_7_4	FM(MSIOF5_SYNC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR0_11_8	FM(MSIOF5_TXD)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR0_15_12	FM(MSIOF5_SCK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR0_19_16	FM(MSIOF5_RXD)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR0_23_20	FM(MSIOF2_SS2)		FM(TCLK1)		FM(IRQ2_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR0_27_24	FM(MSIOF2_SS1)		FM(HTX1)		FM(TX1)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR0_31_28	FM(MSIOF2_SYNC)		FM(HRX1)		FM(RX1)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR0 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR0_3_0	FM(MSIOF2_TXD)		FM(HCTS1_N)		FM(CTS1_N)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR0_7_4	FM(MSIOF2_SCK)		FM(HRTS1_N)		FM(RTS1_N)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR0_11_8	FM(MSIOF2_RXD)		FM(HSCK1)		FM(SCK1)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR0 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR0_3_0	F_(0, 0)		FM(ERROROUTC_N_B)	FM(TCLK2_A)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR0_7_4	F_(0, 0)		FM(MSIOF3_SS1)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR0_11_8	F_(0, 0)		FM(MSIOF3_SS2)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR0_15_12	FM(IRQ3)		FM(MSIOF3_SCK)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR0_19_16	FM(IRQ2)		FM(MSIOF3_TXD)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR0_23_20	FM(IRQ1)		FM(MSIOF3_RXD)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR0_27_24	FM(IRQ0)		FM(MSIOF3_SYNC)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR0_31_28	FM(MSIOF5_SS2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR0 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR0_3_0	FM(MSIOF5_SS1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR0_7_4	FM(MSIOF5_SYNC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR0_11_8	FM(MSIOF5_TXD)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR0_15_12	FM(MSIOF5_SCK)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR0_19_16	FM(MSIOF5_RXD)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR0_23_20	FM(MSIOF2_SS2)		FM(TCLK1)		FM(IRQ2_A)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR0_27_24	FM(MSIOF2_SS1)		FM(HTX1)		FM(TX1)			F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR0_31_28	FM(MSIOF2_SYNC)		FM(HRX1)		FM(RX1)			F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR0 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR0_3_0	FM(MSIOF2_TXD)		FM(HCTS1_N)		FM(CTS1_N)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR0_7_4	FM(MSIOF2_SCK)		FM(HRTS1_N)		FM(RTS1_N)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR0_11_8	FM(MSIOF2_RXD)		FM(HSCK1)		FM(SCK1)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR1 */
-/* IP0SR1 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR1_3_0	FM(MSIOF1_SS2)		FM(HTX3_A)		FM(TX3)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR1_7_4	FM(MSIOF1_SS1)		FM(HCTS3_N_A)		FM(RX3)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR1_11_8	FM(MSIOF1_SYNC)		FM(HRTS3_N_A)		FM(RTS3_N)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR1_15_12	FM(MSIOF1_SCK)		FM(HSCK3_A)		FM(CTS3_N)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR1_19_16	FM(MSIOF1_TXD)		FM(HRX3_A)		FM(SCK3)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR1_23_20	FM(MSIOF1_RXD)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR1_27_24	FM(MSIOF0_SS2)		FM(HTX1_X)		FM(TX1_X)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR1_31_28	FM(MSIOF0_SS1)		FM(HRX1_X)		FM(RX1_X)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR1 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR1_3_0	FM(MSIOF0_SYNC)		FM(HCTS1_N_X)		FM(CTS1_N_X)	FM(CANFD5_TX_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR1_7_4	FM(MSIOF0_TXD)		FM(HRTS1_N_X)		FM(RTS1_N_X)	FM(CANFD5_RX_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR1_11_8	FM(MSIOF0_SCK)		FM(HSCK1_X)		FM(SCK1_X)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR1_15_12	FM(MSIOF0_RXD)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR1_19_16	FM(HTX0)		FM(TX0)			F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR1_23_20	FM(HCTS0_N)		FM(CTS0_N)		FM(PWM8_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR1_27_24	FM(HRTS0_N)		FM(RTS0_N)		FM(PWM9_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR1_31_28	FM(HSCK0)		FM(SCK0)		FM(PWM0_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR1 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR1_3_0	FM(HRX0)		FM(RX0)			F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR1_7_4	FM(SCIF_CLK)		FM(IRQ4_A)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR1_11_8	FM(SSI_SCK)		FM(TCLK3)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR1_15_12	FM(SSI_WS)		FM(TCLK4)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR1_19_16	FM(SSI_SD)		FM(IRQ0_A)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR1_23_20	FM(AUDIO_CLKOUT)	FM(IRQ1_A)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR1_27_24	FM(AUDIO_CLKIN)		FM(PWM3_A)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR1_31_28	F_(0, 0)		FM(TCLK2)		FM(MSIOF4_SS1)	FM(IRQ3_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP3SR1 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP3SR1_3_0	FM(HRX3)		FM(SCK3_A)		FM(MSIOF4_SS2)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR1_7_4	FM(HSCK3)		FM(CTS3_N_A)		FM(MSIOF4_SCK)	FM(TPU0TO0_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR1_11_8	FM(HRTS3_N)		FM(RTS3_N_A)		FM(MSIOF4_TXD)	FM(TPU0TO1_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR1_15_12	FM(HCTS3_N)		FM(RX3_A)		FM(MSIOF4_RXD)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR1_19_16	FM(HTX3)		FM(TX3_A)		FM(MSIOF4_SYNC)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR1 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR1_3_0	FM(MSIOF1_SS2)		FM(HTX3_A)		FM(TX3)			F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR1_7_4	FM(MSIOF1_SS1)		FM(HCTS3_N_A)		FM(RX3)			F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR1_11_8	FM(MSIOF1_SYNC)		FM(HRTS3_N_A)		FM(RTS3_N)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR1_15_12	FM(MSIOF1_SCK)		FM(HSCK3_A)		FM(CTS3_N)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR1_19_16	FM(MSIOF1_TXD)		FM(HRX3_A)		FM(SCK3)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR1_23_20	FM(MSIOF1_RXD)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR1_27_24	FM(MSIOF0_SS2)		FM(HTX1_X)		FM(TX1_X)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR1_31_28	FM(MSIOF0_SS1)		FM(HRX1_X)		FM(RX1_X)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR1 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR1_3_0	FM(MSIOF0_SYNC)		FM(HCTS1_N_X)		FM(CTS1_N_X)		FM(CANFD5_TX_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR1_7_4	FM(MSIOF0_TXD)		FM(HRTS1_N_X)		FM(RTS1_N_X)		FM(CANFD5_RX_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR1_11_8	FM(MSIOF0_SCK)		FM(HSCK1_X)		FM(SCK1_X)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR1_15_12	FM(MSIOF0_RXD)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR1_19_16	FM(HTX0)		FM(TX0)			F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR1_23_20	FM(HCTS0_N)		FM(CTS0_N)		FM(PWM8_A)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR1_27_24	FM(HRTS0_N)		FM(RTS0_N)		FM(PWM9_A)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR1_31_28	FM(HSCK0)		FM(SCK0)		FM(PWM0_A)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR1 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR1_3_0	FM(HRX0)		FM(RX0)			F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR1_7_4	FM(SCIF_CLK)		FM(IRQ4_A)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR1_11_8	FM(SSI_SCK)		FM(TCLK3)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR1_15_12	FM(SSI_WS)		FM(TCLK4)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR1_19_16	FM(SSI_SD)		FM(IRQ0_A)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR1_23_20	FM(AUDIO_CLKOUT)	FM(IRQ1_A)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR1_27_24	FM(AUDIO_CLKIN)		FM(PWM3_A)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR1_31_28	F_(0, 0)		FM(TCLK2)		FM(MSIOF4_SS1)		FM(IRQ3_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP3SR1 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP3SR1_3_0	FM(HRX3)		FM(SCK3_A)		FM(MSIOF4_SS2)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR1_7_4	FM(HSCK3)		FM(CTS3_N_A)		FM(MSIOF4_SCK)		FM(TPU0TO0_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR1_11_8	FM(HRTS3_N)		FM(RTS3_N_A)		FM(MSIOF4_TXD)		FM(TPU0TO1_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR1_15_12	FM(HCTS3_N)		FM(RX3_A)		FM(MSIOF4_RXD)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR1_19_16	FM(HTX3)		FM(TX3_A)		FM(MSIOF4_SYNC)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR2 */
-/* IP0SR2 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR2_3_0	FM(FXR_TXDA)		FM(CANFD1_TX)		FM(TPU0TO2_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR2_7_4	FM(FXR_TXENA_N)		FM(CANFD1_RX)		FM(TPU0TO3_A)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR2_11_8	FM(RXDA_EXTFXR)		FM(CANFD5_TX)		FM(IRQ5)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR2_15_12	FM(CLK_EXTFXR)		FM(CANFD5_RX)		FM(IRQ4_B)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR2_19_16	FM(RXDB_EXTFXR)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR2_23_20	FM(FXR_TXENB_N)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR2_27_24	FM(FXR_TXDB)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR2_31_28	FM(TPU0TO1)		FM(CANFD6_TX)		F_(0, 0)	FM(TCLK2_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR2 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR2_3_0	FM(TPU0TO0)		FM(CANFD6_RX)		F_(0, 0)	FM(TCLK1_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR2_7_4	FM(CAN_CLK)		FM(FXR_TXENA_N_X)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR2_11_8	FM(CANFD0_TX)		FM(FXR_TXENB_N_X)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR2_15_12	FM(CANFD0_RX)		FM(STPWT_EXTFXR)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR2_19_16	FM(CANFD2_TX)		FM(TPU0TO2)		F_(0, 0)	FM(TCLK3_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR2_23_20	FM(CANFD2_RX)		FM(TPU0TO3)		FM(PWM1_B)	FM(TCLK4_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR2_27_24	FM(CANFD3_TX)		F_(0, 0)		FM(PWM2_B)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR2_31_28	FM(CANFD3_RX)		F_(0, 0)		FM(PWM3_B)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR2 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR2_3_0	FM(CANFD4_TX)		F_(0, 0)		FM(PWM4)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR2_7_4	FM(CANFD4_RX)		F_(0, 0)		FM(PWM5)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR2_11_8	FM(CANFD7_TX)		F_(0, 0)		FM(PWM6)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR2_15_12	FM(CANFD7_RX)		F_(0, 0)		FM(PWM7)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR2 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR2_3_0	FM(FXR_TXDA)		FM(CANFD1_TX)		FM(TPU0TO2_A)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR2_7_4	FM(FXR_TXENA_N)		FM(CANFD1_RX)		FM(TPU0TO3_A)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR2_11_8	FM(RXDA_EXTFXR)		FM(CANFD5_TX)		FM(IRQ5)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR2_15_12	FM(CLK_EXTFXR)		FM(CANFD5_RX)		FM(IRQ4_B)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR2_19_16	FM(RXDB_EXTFXR)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR2_23_20	FM(FXR_TXENB_N)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR2_27_24	FM(FXR_TXDB)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR2_31_28	FM(TPU0TO1)		FM(CANFD6_TX)		F_(0, 0)		FM(TCLK2_B)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR2 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR2_3_0	FM(TPU0TO0)		FM(CANFD6_RX)		F_(0, 0)		FM(TCLK1_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR2_7_4	FM(CAN_CLK)		FM(FXR_TXENA_N_X)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR2_11_8	FM(CANFD0_TX)		FM(FXR_TXENB_N_X)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR2_15_12	FM(CANFD0_RX)		FM(STPWT_EXTFXR)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR2_19_16	FM(CANFD2_TX)		FM(TPU0TO2)		F_(0, 0)		FM(TCLK3_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR2_23_20	FM(CANFD2_RX)		FM(TPU0TO3)		FM(PWM1_B)		FM(TCLK4_A)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR2_27_24	FM(CANFD3_TX)		F_(0, 0)		FM(PWM2_B)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR2_31_28	FM(CANFD3_RX)		F_(0, 0)		FM(PWM3_B)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR2 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR2_3_0	FM(CANFD4_TX)		F_(0, 0)		FM(PWM4)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR2_7_4	FM(CANFD4_RX)		F_(0, 0)		FM(PWM5)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR2_11_8	FM(CANFD7_TX)		F_(0, 0)		FM(PWM6)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR2_15_12	FM(CANFD7_RX)		F_(0, 0)		FM(PWM7)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR3 */
-/* IP0SR3 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR3_3_0	FM(MMC_SD_D1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR3_7_4	FM(MMC_SD_D0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR3_11_8	FM(MMC_SD_D2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR3_15_12	FM(MMC_SD_CLK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR3_19_16	FM(MMC_DS)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR3_23_20	FM(MMC_SD_D3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR3_27_24	FM(MMC_D5)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR3_31_28	FM(MMC_D4)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR3 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR3_3_0	FM(MMC_D7)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR3_7_4	FM(MMC_D6)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR3_11_8	FM(MMC_SD_CMD)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR3_15_12	FM(SD_CD)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR3_19_16	FM(SD_WP)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR3_23_20	FM(IPC_CLKIN)		FM(IPC_CLKEN_IN)	FM(PWM1_A)	FM(TCLK3_X)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR3_27_24	FM(IPC_CLKOUT)		FM(IPC_CLKEN_OUT)	FM(ERROROUTC_A)	FM(TCLK4_X)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR3_31_28	FM(QSPI0_SSL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR3 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR3_3_0	FM(QSPI0_IO3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR3_7_4	FM(QSPI0_IO2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR3_11_8	FM(QSPI0_MISO_IO1)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR3_15_12	FM(QSPI0_MOSI_IO0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR3_19_16	FM(QSPI0_SPCLK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR3_23_20	FM(QSPI1_MOSI_IO0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR3_27_24	FM(QSPI1_SPCLK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR3_31_28	FM(QSPI1_MISO_IO1)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP3SR3 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP3SR3_3_0	FM(QSPI1_IO2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR3_7_4	FM(QSPI1_SSL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR3_11_8	FM(QSPI1_IO3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR3_15_12	FM(RPC_RESET_N)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR3_19_16	FM(RPC_WP_N)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP3SR3_23_20	FM(RPC_INT_N)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR3 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR3_3_0	FM(MMC_SD_D1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR3_7_4	FM(MMC_SD_D0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR3_11_8	FM(MMC_SD_D2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR3_15_12	FM(MMC_SD_CLK)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR3_19_16	FM(MMC_DS)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR3_23_20	FM(MMC_SD_D3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR3_27_24	FM(MMC_D5)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR3_31_28	FM(MMC_D4)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR3 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR3_3_0	FM(MMC_D7)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR3_7_4	FM(MMC_D6)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR3_11_8	FM(MMC_SD_CMD)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR3_15_12	FM(SD_CD)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR3_19_16	FM(SD_WP)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR3_23_20	FM(IPC_CLKIN)		FM(IPC_CLKEN_IN)	FM(PWM1_A)		FM(TCLK3_X)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR3_27_24	FM(IPC_CLKOUT)		FM(IPC_CLKEN_OUT)	FM(ERROROUTC_N_A)	FM(TCLK4_X)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR3_31_28	FM(QSPI0_SSL)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR3 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR3_3_0	FM(QSPI0_IO3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR3_7_4	FM(QSPI0_IO2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR3_11_8	FM(QSPI0_MISO_IO1)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR3_15_12	FM(QSPI0_MOSI_IO0)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR3_19_16	FM(QSPI0_SPCLK)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR3_23_20	FM(QSPI1_MOSI_IO0)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR3_27_24	FM(QSPI1_SPCLK)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR3_31_28	FM(QSPI1_MISO_IO1)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP3SR3 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP3SR3_3_0	FM(QSPI1_IO2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR3_7_4	FM(QSPI1_SSL)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR3_11_8	FM(QSPI1_IO3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR3_15_12	FM(RPC_RESET_N)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR3_19_16	FM(RPC_WP_N)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP3SR3_23_20	FM(RPC_INT_N)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR4 */
-/* IP0SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR4_3_0	FM(TSN0_MDIO)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR4_7_4	FM(TSN0_MDC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR4_11_8	FM(TSN0_AVTP_PPS1)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR4_15_12	FM(TSN0_PHY_INT)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR4_19_16	FM(TSN0_LINK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR4_23_20	FM(TSN0_AVTP_MATCH)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR4_27_24	FM(TSN0_AVTP_CAPTURE)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR4_31_28	FM(TSN0_RX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR4_3_0	FM(TSN0_AVTP_PPS0)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR4_7_4	FM(TSN0_TX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR4_11_8	FM(TSN0_RD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR4_15_12	FM(TSN0_RXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR4_19_16	FM(TSN0_TXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR4_23_20	FM(TSN0_RD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR4_27_24	FM(TSN0_TD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR4_31_28	FM(TSN0_TD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR4_3_0	FM(TSN0_RD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR4_7_4	FM(TSN0_RD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR4_11_8	FM(TSN0_TD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR4_15_12	FM(TSN0_TD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR4_19_16	FM(TSN0_TXCREFCLK)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR4_23_20	FM(PCIE0_CLKREQ_N)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR4_27_24	FM(PCIE1_CLKREQ_N)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR4_31_28	FM(AVS0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP3SR4 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP3SR4_3_0	FM(AVS1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR4 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR4_3_0	FM(TSN0_MDIO)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_7_4	FM(TSN0_MDC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_11_8	FM(TSN0_AVTP_PPS1)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_15_12	FM(TSN0_PHY_INT)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_19_16	FM(TSN0_LINK)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_23_20	FM(TSN0_AVTP_MATCH)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_27_24	FM(TSN0_AVTP_CAPTURE)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR4_31_28	FM(TSN0_RX_CTL)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR4 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR4_3_0	FM(TSN0_AVTP_PPS0)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_7_4	FM(TSN0_TX_CTL)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_11_8	FM(TSN0_RD0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_15_12	FM(TSN0_RXC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_19_16	FM(TSN0_TXC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_23_20	FM(TSN0_RD1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_27_24	FM(TSN0_TD1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR4_31_28	FM(TSN0_TD0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR4 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR4_3_0	FM(TSN0_RD3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_7_4	FM(TSN0_RD2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_11_8	FM(TSN0_TD3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_15_12	FM(TSN0_TD2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_19_16	FM(TSN0_TXCREFCLK)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_23_20	FM(PCIE0_CLKREQ_N)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_27_24	FM(PCIE1_CLKREQ_N)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR4_31_28	FM(AVS0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP3SR4 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP3SR4_3_0	FM(AVS1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR5 */
-/* IP0SR5 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR5_3_0	FM(AVB2_AVTP_PPS)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR5_7_4	FM(AVB2_AVTP_CAPTURE)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR5_11_8	FM(AVB2_AVTP_MATCH)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR5_15_12	FM(AVB2_LINK)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR5_19_16	FM(AVB2_PHY_INT)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR5_23_20	FM(AVB2_MAGIC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR5_27_24	FM(AVB2_MDC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR5_31_28	FM(AVB2_TXCREFCLK)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR5 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR5_3_0	FM(AVB2_TD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR5_7_4	FM(AVB2_RD3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR5_11_8	FM(AVB2_MDIO)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR5_15_12	FM(AVB2_TD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR5_19_16	FM(AVB2_TD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR5_23_20	FM(AVB2_RD2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR5_27_24	FM(AVB2_RD1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR5_31_28	FM(AVB2_TD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR5 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR5_3_0	FM(AVB2_TXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR5_7_4	FM(AVB2_RD0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR5_11_8	FM(AVB2_RXC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR5_15_12	FM(AVB2_TX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR5_19_16	FM(AVB2_RX_CTL)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR5 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR5_3_0	FM(AVB2_AVTP_PPS)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_7_4	FM(AVB2_AVTP_CAPTURE)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_11_8	FM(AVB2_AVTP_MATCH)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_15_12	FM(AVB2_LINK)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_19_16	FM(AVB2_PHY_INT)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_23_20	FM(AVB2_MAGIC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_27_24	FM(AVB2_MDC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR5_31_28	FM(AVB2_TXCREFCLK)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR5 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR5_3_0	FM(AVB2_TD3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_7_4	FM(AVB2_RD3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_11_8	FM(AVB2_MDIO)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_15_12	FM(AVB2_TD2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_19_16	FM(AVB2_TD1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_23_20	FM(AVB2_RD2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_27_24	FM(AVB2_RD1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR5_31_28	FM(AVB2_TD0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR5 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR5_3_0	FM(AVB2_TXC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_7_4	FM(AVB2_RD0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_11_8	FM(AVB2_RXC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_15_12	FM(AVB2_TX_CTL)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR5_19_16	FM(AVB2_RX_CTL)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR6 */
-/* IP0SR6 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR6_3_0	FM(AVB1_MDIO)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR6_7_4	FM(AVB1_MAGIC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR6_11_8	FM(AVB1_MDC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR6_15_12	FM(AVB1_PHY_INT)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR6_19_16	FM(AVB1_LINK)		FM(AVB1_MII_TX_ER)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR6_23_20	FM(AVB1_AVTP_MATCH)	FM(AVB1_MII_RX_ER)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR6_27_24	FM(AVB1_TXC)		FM(AVB1_MII_TXC)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR6_31_28	FM(AVB1_TX_CTL)		FM(AVB1_MII_TX_EN)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR6 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR6_3_0	FM(AVB1_RXC)		FM(AVB1_MII_RXC)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR6_7_4	FM(AVB1_RX_CTL)		FM(AVB1_MII_RX_DV)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR6_11_8	FM(AVB1_AVTP_PPS)	FM(AVB1_MII_COL)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR6_15_12	FM(AVB1_AVTP_CAPTURE)	FM(AVB1_MII_CRS)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR6_19_16	FM(AVB1_TD1)		FM(AVB1_MII_TD1)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR6_23_20	FM(AVB1_TD0)		FM(AVB1_MII_TD0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR6_27_24	FM(AVB1_RD1)		FM(AVB1_MII_RD1)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR6_31_28	FM(AVB1_RD0)		FM(AVB1_MII_RD0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR6 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR6_3_0	FM(AVB1_TD2)		FM(AVB1_MII_TD2)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR6_7_4	FM(AVB1_RD2)		FM(AVB1_MII_RD2)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR6_11_8	FM(AVB1_TD3)		FM(AVB1_MII_TD3)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR6_15_12	FM(AVB1_RD3)		FM(AVB1_MII_RD3)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR6_19_16	FM(AVB1_TXCREFCLK)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR6 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR6_3_0	FM(AVB1_MDIO)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR6_7_4	FM(AVB1_MAGIC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR6_11_8	FM(AVB1_MDC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR6_15_12	FM(AVB1_PHY_INT)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR6_19_16	FM(AVB1_LINK)		FM(AVB1_MII_TX_ER)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR6_23_20	FM(AVB1_AVTP_MATCH)	FM(AVB1_MII_RX_ER)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR6_27_24	FM(AVB1_TXC)		FM(AVB1_MII_TXC)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR6_31_28	FM(AVB1_TX_CTL)		FM(AVB1_MII_TX_EN)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR6 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR6_3_0	FM(AVB1_RXC)		FM(AVB1_MII_RXC)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR6_7_4	FM(AVB1_RX_CTL)		FM(AVB1_MII_RX_DV)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR6_11_8	FM(AVB1_AVTP_PPS)	FM(AVB1_MII_COL)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR6_15_12	FM(AVB1_AVTP_CAPTURE)	FM(AVB1_MII_CRS)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR6_19_16	FM(AVB1_TD1)		FM(AVB1_MII_TD1)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR6_23_20	FM(AVB1_TD0)		FM(AVB1_MII_TD0)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR6_27_24	FM(AVB1_RD1)		FM(AVB1_MII_RD1)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR6_31_28	FM(AVB1_RD0)		FM(AVB1_MII_RD0)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR6 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR6_3_0	FM(AVB1_TD2)		FM(AVB1_MII_TD2)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR6_7_4	FM(AVB1_RD2)		FM(AVB1_MII_RD2)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR6_11_8	FM(AVB1_TD3)		FM(AVB1_MII_TD3)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR6_15_12	FM(AVB1_RD3)		FM(AVB1_MII_RD3)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR6_19_16	FM(AVB1_TXCREFCLK)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR7 */
-/* IP0SR7 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR7_3_0	FM(AVB0_AVTP_PPS)	FM(AVB0_MII_COL)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR7_7_4	FM(AVB0_AVTP_CAPTURE)	FM(AVB0_MII_CRS)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR7_11_8	FM(AVB0_AVTP_MATCH)	FM(AVB0_MII_RX_ER)	FM(CC5_OSCOUT)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR7_15_12	FM(AVB0_TD3)		FM(AVB0_MII_TD3)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR7_19_16	FM(AVB0_LINK)		FM(AVB0_MII_TX_ER)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR7_23_20	FM(AVB0_PHY_INT)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR7_27_24	FM(AVB0_TD2)		FM(AVB0_MII_TD2)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR7_31_28	FM(AVB0_TD1)		FM(AVB0_MII_TD1)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR7 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR7_3_0	FM(AVB0_RD3)		FM(AVB0_MII_RD3)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR7_7_4	FM(AVB0_TXCREFCLK)	F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR7_11_8	FM(AVB0_MAGIC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR7_15_12	FM(AVB0_TD0)		FM(AVB0_MII_TD0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR7_19_16	FM(AVB0_RD2)		FM(AVB0_MII_RD2)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR7_23_20	FM(AVB0_MDC)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR7_27_24	FM(AVB0_MDIO)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR7_31_28	FM(AVB0_TXC)		FM(AVB0_MII_TXC)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP2SR7 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP2SR7_3_0	FM(AVB0_TX_CTL)		FM(AVB0_MII_TX_EN)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR7_7_4	FM(AVB0_RD1)		FM(AVB0_MII_RD1)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR7_11_8	FM(AVB0_RD0)		FM(AVB0_MII_RD0)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR7_15_12	FM(AVB0_RXC)		FM(AVB0_MII_RXC)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP2SR7_19_16	FM(AVB0_RX_CTL)		FM(AVB0_MII_RX_DV)	F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR7 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR7_3_0	FM(AVB0_AVTP_PPS)	FM(AVB0_MII_COL)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR7_7_4	FM(AVB0_AVTP_CAPTURE)	FM(AVB0_MII_CRS)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR7_11_8	FM(AVB0_AVTP_MATCH)	FM(AVB0_MII_RX_ER)	FM(CC5_OSCOUT)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR7_15_12	FM(AVB0_TD3)		FM(AVB0_MII_TD3)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR7_19_16	FM(AVB0_LINK)		FM(AVB0_MII_TX_ER)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR7_23_20	FM(AVB0_PHY_INT)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR7_27_24	FM(AVB0_TD2)		FM(AVB0_MII_TD2)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR7_31_28	FM(AVB0_TD1)		FM(AVB0_MII_TD1)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR7 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR7_3_0	FM(AVB0_RD3)		FM(AVB0_MII_RD3)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR7_7_4	FM(AVB0_TXCREFCLK)	F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR7_11_8	FM(AVB0_MAGIC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR7_15_12	FM(AVB0_TD0)		FM(AVB0_MII_TD0)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR7_19_16	FM(AVB0_RD2)		FM(AVB0_MII_RD2)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR7_23_20	FM(AVB0_MDC)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR7_27_24	FM(AVB0_MDIO)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR7_31_28	FM(AVB0_TXC)		FM(AVB0_MII_TXC)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP2SR7 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP2SR7_3_0	FM(AVB0_TX_CTL)		FM(AVB0_MII_TX_EN)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR7_7_4	FM(AVB0_RD1)		FM(AVB0_MII_RD1)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR7_11_8	FM(AVB0_RD0)		FM(AVB0_MII_RD0)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR7_15_12	FM(AVB0_RXC)		FM(AVB0_MII_RXC)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP2SR7_19_16	FM(AVB0_RX_CTL)		FM(AVB0_MII_RX_DV)	F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 /* SR8 */
-/* IP0SR8 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP0SR8_3_0	FM(SCL0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR8_7_4	FM(SDA0)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR8_11_8	FM(SCL1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR8_15_12	FM(SDA1)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR8_19_16	FM(SCL2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR8_23_20	FM(SDA2)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR8_27_24	FM(SCL3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP0SR8_31_28	FM(SDA3)		F_(0, 0)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-
-/* IP1SR8 */		/* 0 */			/* 1 */			/* 2 */		/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
-#define IP1SR8_3_0	FM(SCL4)		FM(HRX2)		FM(SCK4)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR8_7_4	FM(SDA4)		FM(HTX2)		FM(CTS4_N)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR8_11_8	FM(SCL5)		FM(HRTS2_N)		FM(RTS4_N)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR8_15_12	FM(SDA5)		FM(SCIF_CLK2)		F_(0, 0)	F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR8_19_16	F_(0, 0)		FM(HCTS2_N)		FM(TX4)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP1SR8_23_20	F_(0, 0)		FM(HSCK2)		FM(RX4)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+/* IP0SR8 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP0SR8_3_0	FM(SCL0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR8_7_4	FM(SDA0)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR8_11_8	FM(SCL1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR8_15_12	FM(SDA1)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR8_19_16	FM(SCL2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR8_23_20	FM(SDA2)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR8_27_24	FM(SCL3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP0SR8_31_28	FM(SDA3)		F_(0, 0)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+
+/* IP1SR8 */		/* 0 */			/* 1 */			/* 2 */			/* 3		4	 5	  6	   7	    8	     9	      A	       B	C	 D	  E	   F */
+#define IP1SR8_3_0	FM(SCL4)		FM(HRX2)		FM(SCK4)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR8_7_4	FM(SDA4)		FM(HTX2)		FM(CTS4_N)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR8_11_8	FM(SCL5)		FM(HRTS2_N)		FM(RTS4_N)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR8_15_12	FM(SDA5)		FM(SCIF_CLK2)		F_(0, 0)		F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR8_19_16	F_(0, 0)		FM(HCTS2_N)		FM(TX4)			F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP1SR8_23_20	F_(0, 0)		FM(HSCK2)		FM(RX4)			F_(0, 0)	F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
 
 #define PINMUX_GPSR	\
 						GPSR3_29											\
@@ -711,7 +711,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA_GP_ALL(),
 
 	/* IP0SR0 */
-	PINMUX_IPSR_GPSR(IP0SR0_3_0,	ERROROUTC_B),
+	PINMUX_IPSR_GPSR(IP0SR0_3_0,	ERROROUTC_N_B),
 	PINMUX_IPSR_GPSR(IP0SR0_3_0,	TCLK2_A),
 
 	PINMUX_IPSR_GPSR(IP0SR0_7_4,	MSIOF3_SS1),
@@ -977,7 +977,7 @@ static const u16 pinmux_data[] = {
 
 	PINMUX_IPSR_GPSR(IP1SR3_27_24,	IPC_CLKOUT),
 	PINMUX_IPSR_GPSR(IP1SR3_27_24,	IPC_CLKEN_OUT),
-	PINMUX_IPSR_GPSR(IP1SR3_27_24,	ERROROUTC_A),
+	PINMUX_IPSR_GPSR(IP1SR3_27_24,	ERROROUTC_N_A),
 	PINMUX_IPSR_GPSR(IP1SR3_27_24,	TCLK4_X),
 
 	PINMUX_IPSR_GPSR(IP1SR3_31_28,	QSPI0_SSL),
Signature · 1 line
2.39.2
author maintainer
#642 lore raw

PATCH 640/694 leds: TI_LMU_COMMON: select REGMAP instead of depending on it

In reply to Greg Kroah-Hartman

From: Randy Dunlap <[email protected]>

[ Upstream commit a61079efc87888587e463afaed82417b162fbd69 ]

REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it.

Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues.

Therefore, change the use of "depends on REGMAP" to "select REGMAP".

Fixes 3fce8e1eb994 ("leds: TI LMU: Add common code for TI LMU devices")
---
 drivers/leds/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/leds/Kconfig +1 -1
index 9dbce09eabacf..aaa9140bc3514 100644
@@ -795,7 +795,7 @@ config LEDS_SPI_BYTE
 config LEDS_TI_LMU_COMMON
 	tristate "LED driver for TI LMU"
 	depends on LEDS_CLASS
-	depends on REGMAP
+	select REGMAP
 	help
 	  Say Y to enable the LED driver for TI LMU devices.
 	  This supports common features between the TI LM3532, LM3631, LM3632,
Signature · 1 line
2.39.2
author maintainer
#643 lore raw

PATCH 641/694 pinctrl: ralink: reintroduce ralink,rt2880-pinmux compatible string

In reply to Greg Kroah-Hartman

From: Arınç ÜNAL <[email protected]>

[ Upstream commit 7c19147d9cfc0f9328049d2e278279150d7de9ca ]

There have been stable releases with the ralink,rt2880-pinmux compatible string included. Having it removed breaks the ABI. Reintroduce it.

Fixes e5981cd46183 ("pinctrl: ralink: add new compatible strings for each pinctrl subdriver")
---
 drivers/pinctrl/ralink/pinctrl-mt7620.c | 1 +
 drivers/pinctrl/ralink/pinctrl-mt7621.c | 1 +
 drivers/pinctrl/ralink/pinctrl-rt2880.c | 1 +
 drivers/pinctrl/ralink/pinctrl-rt305x.c | 1 +
 drivers/pinctrl/ralink/pinctrl-rt3883.c | 1 +
 5 files changed, 5 insertions(+)
drivers/pinctrl/ralink/pinctrl-mt7620.c +1 -0
index 4e8d26bb34302..06b86c7268392 100644
@@ -372,6 +372,7 @@ static int mt7620_pinctrl_probe(struct platform_device *pdev)
 
 static const struct of_device_id mt7620_pinctrl_match[] = {
 	{ .compatible = "ralink,mt7620-pinctrl" },
+	{ .compatible = "ralink,rt2880-pinmux" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, mt7620_pinctrl_match);
drivers/pinctrl/ralink/pinctrl-mt7621.c +1 -0
index eddc0ba6d468c..fb5824922e788 100644
@@ -97,6 +97,7 @@ static int mt7621_pinctrl_probe(struct platform_device *pdev)
 
 static const struct of_device_id mt7621_pinctrl_match[] = {
 	{ .compatible = "ralink,mt7621-pinctrl" },
+	{ .compatible = "ralink,rt2880-pinmux" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, mt7621_pinctrl_match);
drivers/pinctrl/ralink/pinctrl-rt2880.c +1 -0
index 3e2f1aaaf0957..d7a65fcc7755a 100644
@@ -41,6 +41,7 @@ static int rt2880_pinctrl_probe(struct platform_device *pdev)
 
 static const struct of_device_id rt2880_pinctrl_match[] = {
 	{ .compatible = "ralink,rt2880-pinctrl" },
+	{ .compatible = "ralink,rt2880-pinmux" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rt2880_pinctrl_match);
drivers/pinctrl/ralink/pinctrl-rt305x.c +1 -0
index bdaee5ce1ee08..f6092c64383e5 100644
@@ -118,6 +118,7 @@ static int rt305x_pinctrl_probe(struct platform_device *pdev)
 
 static const struct of_device_id rt305x_pinctrl_match[] = {
 	{ .compatible = "ralink,rt305x-pinctrl" },
+	{ .compatible = "ralink,rt2880-pinmux" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rt305x_pinctrl_match);
drivers/pinctrl/ralink/pinctrl-rt3883.c +1 -0
index 392208662355d..5f766d76bafa6 100644
@@ -88,6 +88,7 @@ static int rt3883_pinctrl_probe(struct platform_device *pdev)
 
 static const struct of_device_id rt3883_pinctrl_match[] = {
 	{ .compatible = "ralink,rt3883-pinctrl" },
+	{ .compatible = "ralink,rt2880-pinmux" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rt3883_pinctrl_match);
Signature · 1 line
2.39.2
author maintainer
#644 lore raw

PATCH 642/694 dmaengine: mv_xor_v2: Fix an error code.

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit 827026ae2e56ec05ef1155661079badbbfc0b038 ]

If the probe is deferred, -EPROBE_DEFER should be returned, not +EPROBE_DEFER.

---
 drivers/dma/mv_xor_v2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/mv_xor_v2.c +1 -1
index 89790beba3052..0991b82658296 100644
@@ -752,7 +752,7 @@ static int mv_xor_v2_probe(struct platform_device *pdev)
 
 	xor_dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (PTR_ERR(xor_dev->clk) == -EPROBE_DEFER) {
-		ret = EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
 		goto disable_reg_clk;
 	}
 	if (!IS_ERR(xor_dev->clk)) {
Signature · 1 line
2.39.2
author maintainer
#645 lore raw

PATCH 643/694 leds: tca6507: Fix error handling of using fwnode_property_read_string

In reply to Greg Kroah-Hartman

From: H. Nikolaus Schaller <[email protected]>

[ Upstream commit c1087c29e96a48e9080377e168d35dcb52fb068b ]

Commit 96f524105b9c ("leds: tca6507: use fwnode API instead of OF")

changed to fwnode API but did not take into account that a missing property "linux,default-trigger" now seems to return an error and as a side effect sets value to -1. This seems to be different from of_get_property() which always returned NULL in any case of error.

Neglecting this side-effect leads to

[   11.201965] Unable to handle kernel paging request at virtual address ffffffff when read

in the strcmp() of led_trigger_set_default() if there is no led-trigger defined in the DTS.

I don't know if this was recently introduced somewhere in the fwnode lib or if the effect was missed in initial testing. Anyways it seems to be a bug to ignore the error return value of an optional value here in the driver.

---
 drivers/leds/leds-tca6507.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/leds/leds-tca6507.c +3 -2
index 07dd12686a696..634cabd5bb796 100644
@@ -691,8 +691,9 @@ tca6507_led_dt_init(struct device *dev)
 		if (fwnode_property_read_string(child, "label", &led.name))
 			led.name = fwnode_get_name(child);
 
-		fwnode_property_read_string(child, "linux,default-trigger",
-					    &led.default_trigger);
+		if (fwnode_property_read_string(child, "linux,default-trigger",
+						&led.default_trigger))
+			led.default_trigger = NULL;
 
 		led.flags = 0;
 		if (fwnode_device_is_compatible(child, "gpio"))
Signature · 1 line
2.39.2
author maintainer
#646 lore raw

PATCH 644/694 pwm: mtk-disp: Disable shadow registers before setting backlight values

In reply to Greg Kroah-Hartman

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit 36dd7f530ae7d9ce9e853ffb8aa337de65c6600b ]

If shadow registers usage is not desired, disable that before performing any write to CON0/1 registers in the .apply() callback, otherwise we may lose clkdiv or period/width updates.

---
 drivers/pwm/pwm-mtk-disp.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
drivers/pwm/pwm-mtk-disp.c +13 -11
index 692a06121b286..82b430d881a20 100644
@@ -138,6 +138,19 @@ static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	high_width = mul_u64_u64_div_u64(state->duty_cycle, rate, div);
 	value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
 
+	if (mdp->data->bls_debug && !mdp->data->has_commit) {
+		/*
+		 * For MT2701, disable double buffer before writing register
+		 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+		 */
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
+	}
+
 	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
 				 PWM_CLKDIV_MASK,
 				 clk_div << PWM_CLKDIV_SHIFT);
@@ -152,17 +165,6 @@ static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
 					 mdp->data->commit_mask,
 					 0x0);
-	} else {
-		/*
-		 * For MT2701, disable double buffer before writing register
-		 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
-		 */
-		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
-					 mdp->data->bls_debug_mask,
-					 mdp->data->bls_debug_mask);
-		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
-					 mdp->data->con0_sel,
-					 mdp->data->con0_sel);
 	}
 
 	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
Signature · 1 line
2.39.2
author maintainer
#647 lore raw

PATCH 645/694 pwm: mtk-disp: Configure double buffering before reading in .get_state()

In reply to Greg Kroah-Hartman

From: AngeloGioacchino Del Regno <[email protected]>

[ Upstream commit b16c310115f2084b8826a35b77ef42bab6786d9f ]

The DISP_PWM controller's default behavior is to always use register double buffering: all reads/writes are then performed on shadow registers instead of working registers and this becomes an issue in case our chosen configuration in Linux is different from the default (or from the one that was pre-applied by the bootloader).

An example of broken behavior is when the controller is configured to use shadow registers, but this driver wants to configure it
otherwise: what happens is that the .get_state() callback is called right after registering the pwmchip and checks whether the PWM is enabled by reading the DISP_PWM_EN register;
At this point, if shadow registers are enabled but their content was not committed before booting Linux, we are *not* reading the current PWM enablement status, leading to the kernel knowing that the hardware is actually enabled when, in reality, it's not.

The aforementioned issue emerged since this driver was fixed with commit 0b5ef3429d8f ("pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm") making it to read the enablement status from the right register.

Configure the controller in the .get_state() callback to avoid this desync issue and get the backlight properly working again.

---
 drivers/pwm/pwm-mtk-disp.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/pwm/pwm-mtk-disp.c +10 -0
index 82b430d881a20..fe9593f968eeb 100644
@@ -196,6 +196,16 @@ static int mtk_disp_pwm_get_state(struct pwm_chip *chip,
 		return err;
 	}
 
+	/*
+	 * Apply DISP_PWM_DEBUG settings to choose whether to enable or disable
+	 * registers double buffer and manual commit to working register before
+	 * performing any read/write operation
+	 */
+	if (mdp->data->bls_debug)
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+
 	rate = clk_get_rate(mdp->clk_main);
 	con0 = readl(mdp->base + mdp->data->con0);
 	con1 = readl(mdp->base + mdp->data->con1);
Signature · 1 line
2.39.2
author maintainer
#648 lore raw

PATCH 646/694 soundwire: intel: dont save hw_params for use in prepare

In reply to Greg Kroah-Hartman

From: Pierre-Louis Bossart <[email protected]>

[ Upstream commit 0a0d1740bd8fd7dafb81fcb102fb5d0b83b1ce73 ]

The existing code copies the hw_params pointer and reuses it later in .prepare, specifically to re-initialize the ALH DMA channel information that's lost in suspend-resume cycles.

This is not needed, we can directly access the information from the substream/rtd - as done for the HDAudio DAIs in sound/soc/sof/intel/hda-dai.c

In addition, using the saved pointer causes the suspend-resume test cases to fail on specific platforms, depending on which version of GCC is used. Péter Ujfalusi and I have spent long hours to root-cause this problem that was reported by the Intel CI first with 6.2-rc1 and again v6.3-rc1. In the latter case we were lucky that the problem was 100% reproducible on local test devices, and found out that adding a dev_dbg() or adding a call to usleep_range() just before accessing the saved pointer "fixed" the issue. With errors appearing just by changing the compiler version or minor changes in the code generated, clearly we have a memory management Heisenbug.

The root-cause seems to be that the hw_params pointer is not persistent. The soc-pcm code allocates the hw_params structure on the stack, and passes it to the BE dailink hw_params and DAIs hw_params. Saving such a pointer and reusing it later during the .prepare stage cannot possibly work reliably, it's broken-by-design since v5.10. It's astonishing that the problem was not seen earlier.

This simple fix will have to be back-ported to -stable, due to changes to avoid the use of the get/set_dmadata routines this patch will only apply on kernels older than v6.1.

Fixes a5a0239c27fe ("soundwire: intel: reinitialize IP+DSP in .prepare(), but only when resuming")
---
 drivers/soundwire/cadence_master.h |  2 --
 drivers/soundwire/intel.c          | 11 +++++++----
 2 files changed, 7 insertions(+), 6 deletions(-)
drivers/soundwire/cadence_master.h +0 -2
index dec0b4f993c1a..6f0092deea4b5 100644
@@ -84,7 +84,6 @@ struct sdw_cdns_stream_config {
  * @bus: Bus handle
  * @stream_type: Stream type
  * @link_id: Master link id
- * @hw_params: hw_params to be applied in .prepare step
  * @suspended: status set when suspended, to be used in .prepare
  * @paused: status set in .trigger, to be used in suspend
  * @direction: stream direction
@@ -96,7 +95,6 @@ struct sdw_cdns_dai_runtime {
 	struct sdw_bus *bus;
 	enum sdw_stream_type stream_type;
 	int link_id;
-	struct snd_pcm_hw_params *hw_params;
 	bool suspended;
 	bool paused;
 	int direction;
drivers/soundwire/intel.c +7 -4
index 2651767272c73..0e26aafd403bb 100644
@@ -817,7 +817,6 @@ static int intel_hw_params(struct snd_pcm_substream *substream,
 	dai_runtime->paused = false;
 	dai_runtime->suspended = false;
 	dai_runtime->pdi = pdi;
-	dai_runtime->hw_params = params;
 
 	/* Inform DSP about PDI stream number */
 	ret = intel_params_stream(sdw, substream->stream, dai, params,
@@ -870,6 +869,11 @@ static int intel_prepare(struct snd_pcm_substream *substream,
 	}
 
 	if (dai_runtime->suspended) {
+		struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+		struct snd_pcm_hw_params *hw_params;
+
+		hw_params = &rtd->dpcm[substream->stream].hw_params;
+
 		dai_runtime->suspended = false;
 
 		/*
@@ -881,7 +885,7 @@ static int intel_prepare(struct snd_pcm_substream *substream,
 		 */
 
 		/* configure stream */
-		ch = params_channels(dai_runtime->hw_params);
+		ch = params_channels(hw_params);
 		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
 			dir = SDW_DATA_DIR_RX;
 		else
@@ -893,7 +897,7 @@ static int intel_prepare(struct snd_pcm_substream *substream,
 
 		/* Inform DSP about PDI stream number */
 		ret = intel_params_stream(sdw, substream->stream, dai,
-					  dai_runtime->hw_params,
+					  hw_params,
 					  sdw->instance,
 					  dai_runtime->pdi->intel_alh_id);
 	}
@@ -932,7 +936,6 @@ intel_hw_free(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
 		return ret;
 	}
 
-	dai_runtime->hw_params = NULL;
 	dai_runtime->pdi = NULL;
 
 	return 0;
Signature · 1 line
2.39.2
author maintainer
#649 lore raw

PATCH 647/694 phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port

In reply to Greg Kroah-Hartman

From: Gaosheng Cui <[email protected]>

[ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ]

The tegra_xusb_port_unregister should be called when usb2_port and ulpi_port map fails in tegra_xusb_add_usb2_port() or in tegra_xusb_add_ulpi_port(), fix it.

---
 drivers/phy/tegra/xusb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/phy/tegra/xusb.c +2 -0
index 78045bd6c2140..a90aea33e06ac 100644
@@ -805,6 +805,7 @@ static int tegra_xusb_add_usb2_port(struct tegra_xusb_padctl *padctl,
 	usb2->base.lane = usb2->base.ops->map(&usb2->base);
 	if (IS_ERR(usb2->base.lane)) {
 		err = PTR_ERR(usb2->base.lane);
+		tegra_xusb_port_unregister(&usb2->base);
 		goto out;
 	}
 
@@ -871,6 +872,7 @@ static int tegra_xusb_add_ulpi_port(struct tegra_xusb_padctl *padctl,
 	ulpi->base.lane = ulpi->base.ops->map(&ulpi->base);
 	if (IS_ERR(ulpi->base.lane)) {
 		err = PTR_ERR(ulpi->base.lane);
+		tegra_xusb_port_unregister(&ulpi->base);
 		goto out;
 	}
 
Signature · 1 line
2.39.2
author maintainer
#650 lore raw

PATCH 648/694 phy: ti: j721e-wiz: Fix unreachable code in wiz_mode_select()

In reply to Greg Kroah-Hartman

From: Siddharth Vadapalli <[email protected]>

[ Upstream commit 57c0e1362fdd57d0cea7ab1e583b58abf4bd8c2d ]

In the wiz_mode_select() function, the configuration performed for PHY_TYPE_USXGMII is unreachable. Fix it.

Fixes b64a85fb8f53 ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
---
 drivers/phy/ti/phy-j721e-wiz.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/phy/ti/phy-j721e-wiz.c +5 -6
index 1b83c98a78f0f..1b5f1a5e2b3ba 100644
@@ -443,18 +443,17 @@ static int wiz_mode_select(struct wiz *wiz)
 	int i;
 
 	for (i = 0; i < num_lanes; i++) {
-		if (wiz->lane_phy_type[i] == PHY_TYPE_DP)
+		if (wiz->lane_phy_type[i] == PHY_TYPE_DP) {
 			mode = LANE_MODE_GEN1;
-		else if (wiz->lane_phy_type[i] == PHY_TYPE_QSGMII)
+		} else if (wiz->lane_phy_type[i] == PHY_TYPE_QSGMII) {
 			mode = LANE_MODE_GEN2;
-		else
-			continue;
-
-		if (wiz->lane_phy_type[i] == PHY_TYPE_USXGMII) {
+		} else if (wiz->lane_phy_type[i] == PHY_TYPE_USXGMII) {
 			ret = regmap_field_write(wiz->p0_mac_src_sel[i], 0x3);
 			ret = regmap_field_write(wiz->p0_rxfclk_sel[i], 0x3);
 			ret = regmap_field_write(wiz->p0_refclk_sel[i], 0x3);
 			mode = LANE_MODE_GEN1;
+		} else {
+			continue;
 		}
 
 		ret = regmap_field_write(wiz->p_standard_mode[i], mode);
Signature · 1 line
2.39.2
author maintainer
#651 lore raw

PATCH 649/694 dma: gpi: remove spurious unlock in gpi_ch_init

In reply to Greg Kroah-Hartman

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 91d6a468e335571f1e67e046050dea9af5fa4ebe ]

gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to unlock it too. Instead the mutex is handled by the function gpi_alloc_chan_resources(), which properly locks and unlocks the mutex.

=====================================
WARNING: bad unlock balance detected! 6.3.0-rc5-00253-g99792582ded1-dirty #15 Not tainted
-------------------------------------
kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at:
[<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc but there are no more locks to release!

other info that might help us debug this:
6 locks held by kworker/u16:0/9:
#0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188
#4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280 #5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c

stack backtrace:
CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty #15
Hardware name: Google Pixel 3 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
 dump_backtrace+0xa0/0xfc
 show_stack+0x18/0x24
 dump_stack_lvl+0x60/0xac
 dump_stack+0x18/0x24
 print_unlock_imbalance_bug+0x130/0x148
 lock_release+0x270/0x300
 __mutex_unlock_slowpath+0x48/0x2cc
 mutex_unlock+0x20/0x2c
 gpi_alloc_chan_resources+0x108/0x5bc
 dma_chan_get+0x84/0x188
 dma_get_slave_channel+0x5c/0x10c
 gpi_of_dma_xlate+0x110/0x1a0
 of_dma_request_slave_channel+0x174/0x280
 dma_request_chan+0x3c/0x2d4
 geni_i2c_probe+0x544/0x63c
 platform_probe+0x68/0xc4
 really_probe+0x148/0x2ac
 __driver_probe_device+0x78/0xe0
 driver_probe_device+0x3c/0x160
 __device_attach_driver+0xb8/0x138
 bus_for_each_drv+0x84/0xe0
 __device_attach+0x9c/0x188
 device_initial_probe+0x14/0x20
 bus_probe_device+0xac/0xb0
 device_add+0x60c/0x7d8
 of_device_add+0x44/0x60
 of_platform_device_create_pdata+0x90/0x124
 of_platform_bus_create+0x15c/0x3c8
 of_platform_populate+0x58/0xf8
 devm_of_platform_populate+0x58/0xbc
 geni_se_probe+0xf0/0x164
 platform_probe+0x68/0xc4
 really_probe+0x148/0x2ac
 __driver_probe_device+0x78/0xe0
 driver_probe_device+0x3c/0x160
 __device_attach_driver+0xb8/0x138
 bus_for_each_drv+0x84/0xe0
 __device_attach+0x9c/0x188
 device_initial_probe+0x14/0x20
 bus_probe_device+0xac/0xb0
 deferred_probe_work_func+0x8c/0xc8
 process_one_work+0x2bc/0x594
 worker_thread+0x228/0x438
 kthread+0x108/0x10c
 ret_from_fork+0x10/0x20
Fixes 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver")
---
 drivers/dma/qcom/gpi.c | 1 -
 1 file changed, 1 deletion(-)
drivers/dma/qcom/gpi.c +0 -1
index 59a36cbf9b5f7..932628b319c81 100644
@@ -1966,7 +1966,6 @@ static int gpi_ch_init(struct gchan *gchan)
 error_config_int:
 	gpi_free_ring(&gpii->ev_ring, gpii);
 exit_gpi_init:
-	mutex_unlock(&gpii->ctrl_lock);
 	return ret;
 }
 
Signature · 1 line
2.39.2
author maintainer
#652 lore raw

PATCH 650/694 dmaengine: dw-edma: Fix to change for continuous transfer

In reply to Greg Kroah-Hartman

From: Shunsuke Mie <[email protected]>

[ Upstream commit a251994a441ee0a69ba7062c8cd2d08ead3db379 ]

The dw-edma driver stops after processing a DMA request even if a request remains in the issued queue, which is not the expected behavior. The DMA engine API requires continuous processing.

Add a trigger to start after one processing finished if there are requests remain.

Fixes e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
---
 drivers/dma/dw-edma/dw-edma-core.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
drivers/dma/dw-edma/dw-edma-core.c +11 -9
index 1906a836f0aab..26a395d02f5d3 100644
@@ -181,7 +181,7 @@ static void vchan_free_desc(struct virt_dma_desc *vdesc)
 	dw_edma_free_desc(vd2dw_edma_desc(vdesc));
 }
 
-static void dw_edma_start_transfer(struct dw_edma_chan *chan)
+static int dw_edma_start_transfer(struct dw_edma_chan *chan)
 {
 	struct dw_edma_chunk *child;
 	struct dw_edma_desc *desc;
@@ -189,16 +189,16 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan)
 
 	vd = vchan_next_desc(&chan->vc);
 	if (!vd)
-		return;
+		return 0;
 
 	desc = vd2dw_edma_desc(vd);
 	if (!desc)
-		return;
+		return 0;
 
 	child = list_first_entry_or_null(&desc->chunk->list,
 					 struct dw_edma_chunk, list);
 	if (!child)
-		return;
+		return 0;
 
 	dw_edma_v0_core_start(child, !desc->xfer_sz);
 	desc->xfer_sz += child->ll_region.sz;
@@ -206,6 +206,8 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan)
 	list_del(&child->list);
 	kfree(child);
 	desc->chunks_alloc--;
+
+	return 1;
 }
 
 static void dw_edma_device_caps(struct dma_chan *dchan,
@@ -602,14 +604,14 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
 		switch (chan->request) {
 		case EDMA_REQ_NONE:
 			desc = vd2dw_edma_desc(vd);
-			if (desc->chunks_alloc) {
-				chan->status = EDMA_ST_BUSY;
-				dw_edma_start_transfer(chan);
-			} else {
+			if (!desc->chunks_alloc) {
 				list_del(&vd->node);
 				vchan_cookie_complete(vd);
-				chan->status = EDMA_ST_IDLE;
 			}
+
+			/* Continue transferring if there are remaining chunks or issued requests.
+			 */
+			chan->status = dw_edma_start_transfer(chan) ? EDMA_ST_BUSY : EDMA_ST_IDLE;
 			break;
 
 		case EDMA_REQ_STOP:
Signature · 1 line
2.39.2
author maintainer
#653 lore raw

PATCH 651/694 dmaengine: dw-edma: Fix to enable to issue dma request on DMA processing

In reply to Greg Kroah-Hartman

From: Shunsuke Mie <[email protected]>

[ Upstream commit 970b17dfe264a9085ba4e593730ecfd496b950ab ]

The issue_pending request is ignored while driver is processing a DMA request. Fix to issue the pending requests on any dma channel status.

Fixes e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver")
---
 drivers/dma/dw-edma/dw-edma-core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/dma/dw-edma/dw-edma-core.c +5 -2
index 26a395d02f5d3..7d2b73ef08727 100644
@@ -308,9 +308,12 @@ static void dw_edma_device_issue_pending(struct dma_chan *dchan)
 	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
 	unsigned long flags;
 
+	if (!chan->configured)
+		return;
+
 	spin_lock_irqsave(&chan->vc.lock, flags);
-	if (chan->configured && chan->request == EDMA_REQ_NONE &&
-	    chan->status == EDMA_ST_IDLE && vchan_issue_pending(&chan->vc)) {
+	if (vchan_issue_pending(&chan->vc) && chan->request == EDMA_REQ_NONE &&
+	    chan->status == EDMA_ST_IDLE) {
 		chan->status = EDMA_ST_BUSY;
 		dw_edma_start_transfer(chan);
 	}
Signature · 1 line
2.39.2
author maintainer
#654 lore raw

PATCH 652/694 dmaengine: at_xdmac: disable/enable clock directly on suspend/resume

In reply to Greg Kroah-Hartman

From: Claudiu Beznea <[email protected]>

[ Upstream commit 2de5ddb5e68c94b781b3789bca1ce52000d7d0e0 ]

Runtime PM APIs for at_xdmac just plays with clk_enable()/clk_disable() letting aside the clk_prepare()/clk_unprepare() that needs to be executed as the clock is also prepared on probe. Thus instead of using runtime PM force suspend/resume APIs use clk_disable_unprepare() + pm_runtime_put_noidle() on suspend and clk_prepare_enable() + pm_runtime_get_noresume() on resume. This approach as been chosen instead of using runtime PM force suspend/resume with clk_unprepare()/clk_prepare() as it looks simpler and the final code is better.

While at it added the missing pm_runtime_mark_last_busy() on suspend before decrementing the reference counter.

Fixes 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support")
---
 drivers/dma/at_xdmac.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/dma/at_xdmac.c +9 -3
index 1f0fab180f8f1..f654ecaafb906 100644
@@ -2130,7 +2130,11 @@ static int __maybe_unused atmel_xdmac_suspend(struct device *dev)
 	atxdmac->save_gim = at_xdmac_read(atxdmac, AT_XDMAC_GIM);
 
 	at_xdmac_off(atxdmac);
-	return pm_runtime_force_suspend(atxdmac->dev);
+	pm_runtime_mark_last_busy(atxdmac->dev);
+	pm_runtime_put_noidle(atxdmac->dev);
+	clk_disable_unprepare(atxdmac->clk);
+
+	return 0;
 }
 
 static int __maybe_unused atmel_xdmac_resume(struct device *dev)
@@ -2142,10 +2146,12 @@ static int __maybe_unused atmel_xdmac_resume(struct device *dev)
 	int			i;
 	int ret;
 
-	ret = pm_runtime_force_resume(atxdmac->dev);
-	if (ret < 0)
+	ret = clk_prepare_enable(atxdmac->clk);
+	if (ret)
 		return ret;
 
+	pm_runtime_get_noresume(atxdmac->dev);
+
 	at_xdmac_axi_config(pdev);
 
 	/* Clear pending interrupts. */
Signature · 1 line
2.39.2
author maintainer
#655 lore raw

PATCH 653/694 dmaengine: at_xdmac: fix imbalanced runtime PM reference counter

In reply to Greg Kroah-Hartman

From: Claudiu Beznea <[email protected]>

[ Upstream commit e53957e1ec5196671e49a48f90a5c9555153189a ]

In case there are channels not paused during suspend (which on AT91 case is valid for serial driver when no_console_suspend boot argument is used) the at_xdmac_runtime_suspend_descriptors() was called more than one time due to at_xdmac_off(). To fix this add a new argument to at_xdmac_off() to specify if runtime PM reference counter needs to be decremented for queued active descriptors. Along with it moved the at_xdmac_runtime_suspend_descriptors() call under at_xdmac_chan_is_paused() check on suspend path as for the rest of channels the suspend is delayed by atmel_xdmac_prepare() in case channel is enabled. Same approach has been applied on resume path.

Fixes 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support")
---
 drivers/dma/at_xdmac.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/dma/at_xdmac.c +13 -13
index f654ecaafb906..af3b494f9ba9b 100644
@@ -412,7 +412,7 @@ static bool at_xdmac_chan_is_enabled(struct at_xdmac_chan *atchan)
 	return ret;
 }
 
-static void at_xdmac_off(struct at_xdmac *atxdmac)
+static void at_xdmac_off(struct at_xdmac *atxdmac, bool suspend_descriptors)
 {
 	struct dma_chan		*chan, *_chan;
 	struct at_xdmac_chan	*atchan;
@@ -431,7 +431,7 @@ static void at_xdmac_off(struct at_xdmac *atxdmac)
 	at_xdmac_write(atxdmac, AT_XDMAC_GID, -1L);
 
 	/* Decrement runtime PM ref counter for each active descriptor. */
-	if (!list_empty(&atxdmac->dma.channels)) {
+	if (!list_empty(&atxdmac->dma.channels) && suspend_descriptors) {
 		list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels,
 					 device_node) {
 			atchan = to_at_xdmac_chan(chan);
@@ -2118,18 +2118,18 @@ static int __maybe_unused atmel_xdmac_suspend(struct device *dev)
 
 		atchan->save_cc = at_xdmac_chan_read(atchan, AT_XDMAC_CC);
 		if (at_xdmac_chan_is_cyclic(atchan)) {
-			if (!at_xdmac_chan_is_paused(atchan))
+			if (!at_xdmac_chan_is_paused(atchan)) {
 				at_xdmac_device_pause(chan);
+				at_xdmac_runtime_suspend_descriptors(atchan);
+			}
 			atchan->save_cim = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
 			atchan->save_cnda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA);
 			atchan->save_cndc = at_xdmac_chan_read(atchan, AT_XDMAC_CNDC);
 		}
-
-		at_xdmac_runtime_suspend_descriptors(atchan);
 	}
 	atxdmac->save_gim = at_xdmac_read(atxdmac, AT_XDMAC_GIM);
 
-	at_xdmac_off(atxdmac);
+	at_xdmac_off(atxdmac, false);
 	pm_runtime_mark_last_busy(atxdmac->dev);
 	pm_runtime_put_noidle(atxdmac->dev);
 	clk_disable_unprepare(atxdmac->clk);
@@ -2165,14 +2165,14 @@ static int __maybe_unused atmel_xdmac_resume(struct device *dev)
 	list_for_each_entry_safe(chan, _chan, &atxdmac->dma.channels, device_node) {
 		atchan = to_at_xdmac_chan(chan);
 
-		ret = at_xdmac_runtime_resume_descriptors(atchan);
-		if (ret < 0)
-			return ret;
-
 		at_xdmac_chan_write(atchan, AT_XDMAC_CC, atchan->save_cc);
 		if (at_xdmac_chan_is_cyclic(atchan)) {
-			if (at_xdmac_chan_is_paused(atchan))
+			if (at_xdmac_chan_is_paused(atchan)) {
+				ret = at_xdmac_runtime_resume_descriptors(atchan);
+				if (ret < 0)
+					return ret;
 				at_xdmac_device_resume(chan);
+			}
 			at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, atchan->save_cnda);
 			at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, atchan->save_cndc);
 			at_xdmac_chan_write(atchan, AT_XDMAC_CIE, atchan->save_cim);
@@ -2318,7 +2318,7 @@ static int at_xdmac_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&atxdmac->dma.channels);
 
 	/* Disable all chans and interrupts. */
-	at_xdmac_off(atxdmac);
+	at_xdmac_off(atxdmac, true);
 
 	for (i = 0; i < nr_channels; i++) {
 		struct at_xdmac_chan *atchan = &atxdmac->chan[i];
@@ -2382,7 +2382,7 @@ static int at_xdmac_remove(struct platform_device *pdev)
 	struct at_xdmac	*atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
 	int		i;
 
-	at_xdmac_off(atxdmac);
+	at_xdmac_off(atxdmac, true);
 	of_dma_controller_free(pdev->dev.of_node);
 	dma_async_device_unregister(&atxdmac->dma);
 	pm_runtime_disable(atxdmac->dev);
Signature · 1 line
2.39.2
author maintainer
#656 lore raw

PATCH 654/694 dmaengine: at_xdmac: do not resume channels paused by consumers

In reply to Greg Kroah-Hartman

From: Claudiu Beznea <[email protected]>

[ Upstream commit 44fe8440bda545b5d167329df88c47609a645168 ]

In case there are DMA channels not paused by consumers in suspend process (valid on AT91 SoCs for serial driver when no_console_suspend) the driver pauses them (using at_xdmac_device_pause() which is also the same function called by dmaengine_pause()) and then in the resume process the driver resumes them calling at_xdmac_device_resume() which is the same function called by dmaengine_resume()). This is good for DMA channels not paused by consumers but for drivers that calls dmaengine_pause()/dmaegine_resume() on suspend/resume path this may lead to DMA channel being enabled before the IP is enabled. For IPs that needs strict ordering with regards to DMA channel enablement this will lead to wrong behavior. To fix this add a new set of functions at_xdmac_device_pause_internal()/at_xdmac_device_resume_internal() to be called only on suspend/resume.

Fixes e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
---
 drivers/dma/at_xdmac.c | 52 ++++++++++++++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 7 deletions(-)
drivers/dma/at_xdmac.c +45 -7
index af3b494f9ba9b..fa1e2e0da02f5 100644
@@ -187,6 +187,7 @@
 enum atc_status {
 	AT_XDMAC_CHAN_IS_CYCLIC = 0,
 	AT_XDMAC_CHAN_IS_PAUSED,
+	AT_XDMAC_CHAN_IS_PAUSED_INTERNAL,
 };
 
 struct at_xdmac_layout {
@@ -347,6 +348,11 @@ static inline int at_xdmac_chan_is_paused(struct at_xdmac_chan *atchan)
 	return test_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
 }
 
+static inline int at_xdmac_chan_is_paused_internal(struct at_xdmac_chan *atchan)
+{
+	return test_bit(AT_XDMAC_CHAN_IS_PAUSED_INTERNAL, &atchan->status);
+}
+
 static inline bool at_xdmac_chan_is_peripheral_xfer(u32 cfg)
 {
 	return cfg & AT_XDMAC_CC_TYPE_PER_TRAN;
@@ -1898,6 +1904,26 @@ static int at_xdmac_device_config(struct dma_chan *chan,
 	return ret;
 }
 
+static void at_xdmac_device_pause_set(struct at_xdmac *atxdmac,
+				      struct at_xdmac_chan *atchan)
+{
+	at_xdmac_write(atxdmac, atxdmac->layout->grws, atchan->mask);
+	while (at_xdmac_chan_read(atchan, AT_XDMAC_CC) &
+	       (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP))
+		cpu_relax();
+}
+
+static void at_xdmac_device_pause_internal(struct at_xdmac_chan *atchan)
+{
+	struct at_xdmac		*atxdmac = to_at_xdmac(atchan->chan.device);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&atchan->lock, flags);
+	set_bit(AT_XDMAC_CHAN_IS_PAUSED_INTERNAL, &atchan->status);
+	at_xdmac_device_pause_set(atxdmac, atchan);
+	spin_unlock_irqrestore(&atchan->lock, flags);
+}
+
 static int at_xdmac_device_pause(struct dma_chan *chan)
 {
 	struct at_xdmac_chan	*atchan = to_at_xdmac_chan(chan);
@@ -1915,11 +1941,8 @@ static int at_xdmac_device_pause(struct dma_chan *chan)
 		return ret;
 
 	spin_lock_irqsave(&atchan->lock, flags);
-	at_xdmac_write(atxdmac, atxdmac->layout->grws, atchan->mask);
-	while (at_xdmac_chan_read(atchan, AT_XDMAC_CC)
-	       & (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP))
-		cpu_relax();
 
+	at_xdmac_device_pause_set(atxdmac, atchan);
 	/* Decrement runtime PM ref counter for each active descriptor. */
 	at_xdmac_runtime_suspend_descriptors(atchan);
 
@@ -1931,6 +1954,17 @@ static int at_xdmac_device_pause(struct dma_chan *chan)
 	return 0;
 }
 
+static void at_xdmac_device_resume_internal(struct at_xdmac_chan *atchan)
+{
+	struct at_xdmac		*atxdmac = to_at_xdmac(atchan->chan.device);
+	unsigned long		flags;
+
+	spin_lock_irqsave(&atchan->lock, flags);
+	at_xdmac_write(atxdmac, atxdmac->layout->grwr, atchan->mask);
+	clear_bit(AT_XDMAC_CHAN_IS_PAUSED_INTERNAL, &atchan->status);
+	spin_unlock_irqrestore(&atchan->lock, flags);
+}
+
 static int at_xdmac_device_resume(struct dma_chan *chan)
 {
 	struct at_xdmac_chan	*atchan = to_at_xdmac_chan(chan);
@@ -2119,7 +2153,7 @@ static int __maybe_unused atmel_xdmac_suspend(struct device *dev)
 		atchan->save_cc = at_xdmac_chan_read(atchan, AT_XDMAC_CC);
 		if (at_xdmac_chan_is_cyclic(atchan)) {
 			if (!at_xdmac_chan_is_paused(atchan)) {
-				at_xdmac_device_pause(chan);
+				at_xdmac_device_pause_internal(atchan);
 				at_xdmac_runtime_suspend_descriptors(atchan);
 			}
 			atchan->save_cim = at_xdmac_chan_read(atchan, AT_XDMAC_CIM);
@@ -2167,11 +2201,15 @@ static int __maybe_unused atmel_xdmac_resume(struct device *dev)
 
 		at_xdmac_chan_write(atchan, AT_XDMAC_CC, atchan->save_cc);
 		if (at_xdmac_chan_is_cyclic(atchan)) {
-			if (at_xdmac_chan_is_paused(atchan)) {
+			/*
+			 * Resume only channels not explicitly paused by
+			 * consumers.
+			 */
+			if (at_xdmac_chan_is_paused_internal(atchan)) {
 				ret = at_xdmac_runtime_resume_descriptors(atchan);
 				if (ret < 0)
 					return ret;
-				at_xdmac_device_resume(chan);
+				at_xdmac_device_resume_internal(atchan);
 			}
 			at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, atchan->save_cnda);
 			at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, atchan->save_cndc);
Signature · 1 line
2.39.2