Skip to contentSkip to conversation

Makefile: Dereference symlinks on install

PATCH New Filip Filmar 3 participants 10 messages May 15, 2023 – May 22, 2023 1 message not in the archive Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Makefile: Dereference symlinks on install

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel. Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

---
 Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Makefile +4 -4
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     cat $(2) > $(1)
 copy_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " COPY      $(subst $(build_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     mkdir -p $(1)/$(3); \
 	     for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     dest_dir=`dirname $$dest_file`; \
 	     echo " INSTALL   "$(3)"/"`echo $$rel_file`; \
 	     mkdir -p $$dest_dir; \
-	     cp -f $$file $$dest_file; \
+	     cp -L -f $$file $$dest_file; \
 	     done \
 	     fi
 inst_header_dir =  $(CMD_PREFIX)mkdir -p $(1); \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -rf $(2) $(1)
+	     cp -L -rf $(2) $(1)
 compile_cpp_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " CPP-DEP   $(subst $(build_dir)/,,$(1))"; \
 	     printf %s `dirname $(1)`/  > $(1) && \
Signature · 1 line
2.40.1.521.gf1e218fcd8-goog
#1 lore raw

PATCH 1/1 Makefile: Dereference symlinks on install

? 2023-05-15???? 20:52 +0000?Filip Filmar???

Quoted 11 lines

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel.? Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

Quoted 5 lines

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

s-o-b is missing. Otherwise, look good to me.

Quoted 40 lines

---
?Makefile | 8 ++++----
?1 file changed, 4 insertions(+), 4 deletions(-)

Makefile +3 -3
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? cat $(2) > $(1)
 ?copy_file =? $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? echo " COPY????? $(subst $(build_dir)/,,$(1))"; \
-??????????? cp -f $(2) $(1)
+??????????? cp -L -f $(2) $(1)
 ?inst_file =? $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? echo " INSTALL?? $(subst $(install_root_dir)/,,$(1))"; \
-??????????? cp -f $(2) $(1)
+??????????? cp -L -f $(2) $(1)
 ?inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 ???????????? mkdir -p $(1)/$(3); \
 ???????????? for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 ???????????? dest_dir=`dirname $$dest_file`; \
 ???????????? echo " INSTALL?? "$(3)"/"`echo $$rel_file`; \
 ???????????? mkdir -p $$dest_dir; \
-??????????? cp -f $$file $$dest_file; \
+??????????? cp -L -f $$file $$dest_file; \
 ???????????? done \

???????????? fi
?inst_header_dir =? $(CMD_PREFIX)mkdir -p $(1); \
???????????? echo " INSTALL?? $(subst $(install_root_dir)/,,$(1))"; \
-??????????? cp -rf $(2) $(1)
+??????????? cp -L -rf $(2) $(1)
?compile_cpp_dep = $(CMD_PREFIX)mkdir -p dirname $(1); \
???????????? echo " CPP-DEP?? $(subst $(build_dir)/,,$(1))"; \
???????????? printf %s dirname $(1)/? > $(1) && \

Signature · 1 line
2.40.1.521.gf1e218fcd8-goog
#2 lore raw

PATCH 1/1 Makefile: Dereference symlinks on install

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel. Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

---
 Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Makefile +4 -4
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     cat $(2) > $(1)
 copy_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " COPY      $(subst $(build_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     mkdir -p $(1)/$(3); \
 	     for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     dest_dir=`dirname $$dest_file`; \
 	     echo " INSTALL   "$(3)"/"`echo $$rel_file`; \
 	     mkdir -p $$dest_dir; \
-	     cp -f $$file $$dest_file; \
+	     cp -L -f $$file $$dest_file; \
 	     done \
 	     fi
 inst_header_dir =  $(CMD_PREFIX)mkdir -p $(1); \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -rf $(2) $(1)
+	     cp -L -rf $(2) $(1)
 compile_cpp_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " CPP-DEP   $(subst $(build_dir)/,,$(1))"; \
 	     printf %s `dirname $(1)`/  > $(1) && \
Signature · 1 line
2.40.1.606.ga4b1b128d6-goog
#3 lore raw

PATCH 1/1 Makefile: Dereference symlinks on install

? 2023-05-15???? 23:17 +0000?Filip Filmar???

Quoted 11 lines

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel.? Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

Quoted 7 lines

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

Missing my tag.

Regards,
Xiang W

Quoted 40 lines

---
?Makefile | 8 ++++----
?1 file changed, 4 insertions(+), 4 deletions(-)

Makefile +3 -3
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? cat $(2) > $(1)
 ?copy_file =? $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? echo " COPY????? $(subst $(build_dir)/,,$(1))"; \
-??????????? cp -f $(2) $(1)
+??????????? cp -L -f $(2) $(1)
 ?inst_file =? $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? echo " INSTALL?? $(subst $(install_root_dir)/,,$(1))"; \
-??????????? cp -f $(2) $(1)
+??????????? cp -L -f $(2) $(1)
 ?inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 ???????????? mkdir -p $(1)/$(3); \
 ???????????? for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 ???????????? dest_dir=`dirname $$dest_file`; \
 ???????????? echo " INSTALL?? "$(3)"/"`echo $$rel_file`; \
 ???????????? mkdir -p $$dest_dir; \
-??????????? cp -f $$file $$dest_file; \
+??????????? cp -L -f $$file $$dest_file; \
 ???????????? done \

???????????? fi
?inst_header_dir =? $(CMD_PREFIX)mkdir -p $(1); \
???????????? echo " INSTALL?? $(subst $(install_root_dir)/,,$(1))"; \
-??????????? cp -rf $(2) $(1)
+??????????? cp -L -rf $(2) $(1)
?compile_cpp_dep = $(CMD_PREFIX)mkdir -p dirname $(1); \
???????????? echo " CPP-DEP?? $(subst $(build_dir)/,,$(1))"; \
???????????? printf %s dirname $(1)/? > $(1) && \

Signature · 1 line
2.40.1.606.ga4b1b128d6-goog

A message that is not in the archive (sent off-list or not yet received): CAGEh6bgZLfNcPW91SG5OgNawRE1MhHv7z64UwhvOMxj+1nahHA@mail.gmail.com

#5 lore raw

PATCH 1/1 Makefile: Dereference symlinks on install

? 2023-05-15???? 17:33 -0700?Filip Filmar???

Quoted 7 lines · On Mon, May 15, 2023 at 4:38?PM Xiang W <[email protected]> wrote:
Quoted 3 lines
Quoted 1 line

Missing my tag.

I don't follow. What do you want me to change?

Missing "Reviewed-by: Xiang W <[email protected]>". Sending a new patch should change the subject [PATCH v[n]].

Regards,
Xiang W

Quoted 2 lines

F?

#6 lore raw

PATCH 1/1 Makefile: Dereference symlinks on install

Will do.

Quoted 17 lines · On Mon, May 15, 2023 at 6:24?PM Xiang W <[email protected]> wrote:

? 2023-05-15???? 17:33 -0700?Filip Filmar???

Quoted 7 lines · On Mon, May 15, 2023 at 4:38?PM Xiang W <[email protected]> wrote:
Quoted 3 lines
Quoted 1 line

Missing my tag.

I don't follow. What do you want me to change?

Missing "Reviewed-by: Xiang W <[email protected]>". Sending a new patch should change the subject [PATCH v[n]].

Regards,
Xiang W

Quoted 2 lines

F

#7 lore raw

PATCH 1/1 ] Makefile: Dereference symlinks on install

In reply to Xiang W

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel. Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

---
 Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Makefile +4 -4
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     cat $(2) > $(1)
 copy_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " COPY      $(subst $(build_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     mkdir -p $(1)/$(3); \
 	     for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     dest_dir=`dirname $$dest_file`; \
 	     echo " INSTALL   "$(3)"/"`echo $$rel_file`; \
 	     mkdir -p $$dest_dir; \
-	     cp -f $$file $$dest_file; \
+	     cp -L -f $$file $$dest_file; \
 	     done \
 	     fi
 inst_header_dir =  $(CMD_PREFIX)mkdir -p $(1); \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -rf $(2) $(1)
+	     cp -L -rf $(2) $(1)
 compile_cpp_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " CPP-DEP   $(subst $(build_dir)/,,$(1))"; \
 	     printf %s `dirname $(1)`/  > $(1) && \
Signature · 1 line
2.40.1.606.ga4b1b128d6-goog
#8 lore raw

PATCH 1/1 ] Makefile: Dereference symlinks on install

? 2023-05-16???? 01:42 +0000?Filip Filmar???

Quoted 11 lines

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel.? Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

Quoted 8 lines

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

Sorry, I probably didn't express myself clearly enough. What I wanted to say was:
[PATCH] Makefile: Dereference symlinks on install [PATCH v2] Makefile: Dereference symlinks on install [PATCH v3] Makefile: Dereference symlinks on install
...

Regards,
Xiang W

Quoted 36 lines

---
?Makefile | 8 ++++----
?1 file changed, 4 insertions(+), 4 deletions(-)

Makefile +3 -3
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? cat $(2) > $(1)
 ?copy_file =? $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? echo " COPY????? $(subst $(build_dir)/,,$(1))"; \
-??????????? cp -f $(2) $(1)
+??????????? cp -L -f $(2) $(1)
 ?inst_file =? $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 ???????????? echo " INSTALL?? $(subst $(install_root_dir)/,,$(1))"; \
-??????????? cp -f $(2) $(1)
+??????????? cp -L -f $(2) $(1)
 ?inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 ???????????? mkdir -p $(1)/$(3); \
 ???????????? for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 ???????????? dest_dir=`dirname $$dest_file`; \
 ???????????? echo " INSTALL?? "$(3)"/"`echo $$rel_file`; \
 ???????????? mkdir -p $$dest_dir; \
-??????????? cp -f $$file $$dest_file; \
+??????????? cp -L -f $$file $$dest_file; \
 ???????????? done \

???????????? fi
?inst_header_dir =? $(CMD_PREFIX)mkdir -p $(1); \
???????????? echo " INSTALL?? $(subst $(install_root_dir)/,,$(1))"; \
-??????????? cp -rf $(2) $(1)
+??????????? cp -L -rf $(2) $(1)
?compile_cpp_dep = $(CMD_PREFIX)mkdir -p dirname $(1); \
???????????? echo " CPP-DEP?? $(subst $(build_dir)/,,$(1))"; \
???????????? printf %s dirname $(1)/? > $(1) && \

Applied
#9 lore raw

PATCH 1/1 ] Makefile: Dereference symlinks on install

Quoted 21 lines · On Tue, May 16, 2023 at 8:04?AM Xiang W <[email protected]> wrote:

? 2023-05-16???? 01:42 +0000?Filip Filmar???

Quoted 19 lines

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel. Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

Somehow, this patch did not land in my inbox.

This looks good to me.

Applied this patch to the riscv/opensbi repo.

Thanks,
Anup

Quoted 50 lines

Sorry, I probably didn't express myself clearly enough. What I wanted to say was:
[PATCH] Makefile: Dereference symlinks on install [PATCH v2] Makefile: Dereference symlinks on install [PATCH v3] Makefile: Dereference symlinks on install
...

Regards,
Xiang W

Quoted 26 lines
---
 Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Makefile +2 -3
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
             cat $(2) > $(1)
 copy_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
             echo " COPY      $(subst $(build_dir)/,,$(1))"; \
-            cp -f $(2) $(1)
+            cp -L -f $(2) $(1)
 inst_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
             echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-            cp -f $(2) $(1)
+            cp -L -f $(2) $(1)
 inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
             mkdir -p $(1)/$(3); \
             for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
             dest_dir=`dirname $$dest_file`; \
             echo " INSTALL   "$(3)"/"`echo $$rel_file`; \
             mkdir -p $$dest_dir; \
-            cp -f $$file $$dest_file; \

Makefile inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \ · line 424

Quoted 10 lines
Makefile +2 -1
+            cp -L -f $$file $$dest_file; \
             done \
             fi
 inst_header_dir =  $(CMD_PREFIX)mkdir -p $(1); \
             echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-            cp -rf $(2) $(1)
+            cp -L -rf $(2) $(1)
 compile_cpp_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
             echo " CPP-DEP   $(subst $(build_dir)/,,$(1))"; \
             printf %s `dirname $(1)`/  > $(1) && \

--
opensbi mailing list
opensbi at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/opensbi

#10 lore raw

PATCH v4 1/1 Makefile: Dereference symlinks on install

In reply to Xiang W

Adds the -L flag (follow symlinks) to the cp commands used to install libsbi.a and include/sbi/*.

This should make no difference in regular compilation. However, it does make a difference when compiling with bazel. Namely, bazel's sandboxing will turn all the source files into symlinks. After installation with cp the destination files will be symlinks pointing to the sandbox symlinks. As the sandbox files are removed when compilation ends, the just-copied symlinks become dangling symlinks.

The resulting include files will be
unusable due to the dangling symlink issues. Adding -L when copying ensures that the files obtained by executing the install targets are always dereferenced to files, rather than symlinks, eliminating this issue.

---
 Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Makefile +4 -4
index a26a39b..730dbd9 100644
@@ -401,10 +401,10 @@ merge_deps = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     cat $(2) > $(1)
 copy_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " COPY      $(subst $(build_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file =  $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -f $(2) $(1)
+	     cp -L -f $(2) $(1)
 inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     mkdir -p $(1)/$(3); \
 	     for file in $(4) ; do \
@@ -413,12 +413,12 @@ inst_file_list = $(CMD_PREFIX)if [ ! -z "$(4)" ]; then \
 	     dest_dir=`dirname $$dest_file`; \
 	     echo " INSTALL   "$(3)"/"`echo $$rel_file`; \
 	     mkdir -p $$dest_dir; \
-	     cp -f $$file $$dest_file; \
+	     cp -L -f $$file $$dest_file; \
 	     done \
 	     fi
 inst_header_dir =  $(CMD_PREFIX)mkdir -p $(1); \
 	     echo " INSTALL   $(subst $(install_root_dir)/,,$(1))"; \
-	     cp -rf $(2) $(1)
+	     cp -L -rf $(2) $(1)
 compile_cpp_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
 	     echo " CPP-DEP   $(subst $(build_dir)/,,$(1))"; \
 	     printf %s `dirname $(1)`/  > $(1) && \
Signature · 1 line
2.40.1.606.ga4b1b128d6-goog