Skip to contentSkip to conversation

scsi: qla4xxx: Replace all non-returning strlcpy with strscpy

PATCH Applied Azeem Shaikh 3 participants 4 messages May 16, 2023 – May 22, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 scsi: qla4xxx: Replace all non-returning strlcpy with strscpy

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

---
 drivers/scsi/qla4xxx/ql4_mbx.c |    8 ++++----
 drivers/scsi/qla4xxx/ql4_os.c  |   14 +++++++-------
 2 files changed, 11 insertions(+), 11 deletions(-)
drivers/scsi/qla4xxx/ql4_mbx.c +4 -4
index cd71074f3abe..249f1d7021d4 100644
@@ -1611,8 +1611,8 @@ int qla4xxx_get_chap(struct scsi_qla_host *ha, char *username, char *password,
 		goto exit_get_chap;
 	}
 
-	strlcpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
-	strlcpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
+	strscpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
+	strscpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
 	chap_table->cookie = cpu_to_le16(CHAP_VALID_COOKIE);
 
 exit_get_chap:
@@ -1732,8 +1732,8 @@ int qla4xxx_get_uni_chap_at_index(struct scsi_qla_host *ha, char *username,
 		goto exit_unlock_uni_chap;
 	}
 
-	strlcpy(password, chap_table->secret, MAX_CHAP_SECRET_LEN);
-	strlcpy(username, chap_table->name, MAX_CHAP_NAME_LEN);
+	strscpy(password, chap_table->secret, MAX_CHAP_SECRET_LEN);
+	strscpy(username, chap_table->name, MAX_CHAP_NAME_LEN);
 
 	rval = QLA_SUCCESS;
 
drivers/scsi/qla4xxx/ql4_os.c +7 -7
index ee6d784c095c..b2a3988e1e15 100644
@@ -798,9 +798,9 @@ static int qla4xxx_get_chap_list(struct Scsi_Host *shost, uint16_t chap_tbl_idx,
 			continue;
 
 		chap_rec->chap_tbl_idx = i;
-		strlcpy(chap_rec->username, chap_table->name,
+		strscpy(chap_rec->username, chap_table->name,
 			ISCSI_CHAP_AUTH_NAME_MAX_LEN);
-		strlcpy(chap_rec->password, chap_table->secret,
+		strscpy(chap_rec->password, chap_table->secret,
 			QL4_CHAP_MAX_SECRET_LEN);
 		chap_rec->password_length = chap_table->secret_len;
 
@@ -6052,8 +6052,8 @@ static int qla4xxx_get_bidi_chap(struct scsi_qla_host *ha, char *username,
 		if (!(chap_table->flags & BIT_6)) /* Not BIDI */
 			continue;
 
-		strlcpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
-		strlcpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
+		strscpy(password, chap_table->secret, QL4_CHAP_MAX_SECRET_LEN);
+		strscpy(username, chap_table->name, QL4_CHAP_MAX_NAME_LEN);
 		ret = 0;
 		break;
 	}
@@ -6281,8 +6281,8 @@ static void qla4xxx_get_param_ddb(struct ddb_entry *ddb_entry,
 
 	tddb->tpgt = sess->tpgt;
 	tddb->port = conn->persistent_port;
-	strlcpy(tddb->iscsi_name, sess->targetname, ISCSI_NAME_SIZE);
-	strlcpy(tddb->ip_addr, conn->persistent_address, DDB_IPADDR_LEN);
+	strscpy(tddb->iscsi_name, sess->targetname, ISCSI_NAME_SIZE);
+	strscpy(tddb->ip_addr, conn->persistent_address, DDB_IPADDR_LEN);
 }
 
 static void qla4xxx_convert_param_ddb(struct dev_db_entry *fw_ddb_entry,
@@ -7781,7 +7781,7 @@ static int qla4xxx_sysfs_ddb_logout(struct iscsi_bus_flash_session *fnode_sess,
 		goto exit_ddb_logout;
 	}
 
-	strlcpy(flash_tddb->iscsi_name, fnode_sess->targetname,
+	strscpy(flash_tddb->iscsi_name, fnode_sess->targetname,
 		ISCSI_NAME_SIZE);
 
 	if (!strncmp(fnode_sess->portal_type, PORTAL_TYPE_IPV6, 4))
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Azeem Shaikh

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

Quoted 4 lines

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signature · 1 line
Kees Cook
#2 lore raw
In reply to Azeem Shaikh

Azeem,

Quoted 6 lines

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe.

Applied to 6.5/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering
#3 lore raw
In reply to Azeem Shaikh
Quoted 9 lines · Azeem Shaikh

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[...]

Applied to 6.5/scsi-queue, thanks!

[1/1] scsi: qla4xxx: Replace all non-returning strlcpy with strscpy

      https://git.kernel.org/mkp/scsi/c/41300cc989c2
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering